Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

6.5. Creating Distributed Volumes

This type of volume spreads files across the bricks in the volume.
Illustration of a distributed volume consisting of two servers. Two files are shown on the server1 brick, and one file is shown on the server2 brick. The distributed volume is set to a single mount point.
View larger image
Illustration of a distributed volume consisting of two servers. Two files are shown on the server1 brick, and one file is shown on the server2 brick. The distributed volume is set to a single mount point.

Figure 6.2. Illustration of a Distributed Volume

Warning

Distributed volumes can suffer significant data loss during a disk or server failure because directory contents are spread randomly across the bricks in the volume.
Use distributed volumes where scalable storage and redundancy is either not important, or is provided by other hardware or software layers.

Create a Distributed Volume

Use gluster volume create command to create different types of volumes, and gluster volume info command to verify successful volume creation.

Pre-requisites

  1. Run the gluster volume create command to create the distributed volume.
    The syntax is gluster volume create NEW-VOLNAME [transport tcp | rdma | tcp,rdma] NEW-BRICK...
    The default value for transport is tcp. Other options can be passed such as auth.allow or auth.reject. See Section 10.1, “Configuring Volume Options” for a full list of parameters.

    Example 6.1. Distributed Volume with Two Storage Servers

    # gluster volume create test-volume server1:/exp1/brick server2:/exp2/brick 
Creation of test-volume has been successful
Please start the volume to access data.
    Copy to Clipboard Toggle word wrap

    Example 6.2. Distributed Volume over InfiniBand with Four Servers

    # gluster volume create test-volume transport rdma server1:/exp1/brick server2:/exp2/brick server3:/exp3/brick server4:/exp4/brick
Creation of test-volume has been successful
Please start the volume to access data.
    Copy to Clipboard Toggle word wrap
  2. Run # gluster volume start VOLNAME to start the volume. 
    # gluster volume start test-volume
Starting test-volume has been successful
    Copy to Clipboard Toggle word wrap
  3. Run gluster volume info command to optionally display the volume information.
    The following output is the result of Example 6.1, “Distributed Volume with Two Storage Servers”. 
    # gluster volume info
Volume Name: test-volume
Type: Distribute
Status: Created
Number of Bricks: 2
Transport-type: tcp
Bricks:
Brick1: server1:/exp1/brick
Brick2: server2:/exp2/brick
    Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat