SupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 5. address

This chapter describes the commands under the address command.

5.1. address group create

Create a new Address Group

Usage:

openstack address group create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty]
                                      [--description <description>]
                                      [--address <ip-address>]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      <name>

Table 5.1. Positional arguments
ValueSummary

<name>

New address group name

Table 5.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--description <description>

New address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Table 5.3. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 5.4. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.5. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 5.6. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.2. address group delete

Delete address group(s)

Usage:

openstack address group delete [-h]
                                      <address-group> [<address-group> ...]

Table 5.7. Positional arguments
ValueSummary

<address-group>

Address group(s) to delete (name or id)

Table 5.8. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.3. address group list

List address groups

Usage:

openstack address group list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>] [--project <project>]
                                    [--project-domain <project-domain>]

Table 5.9. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address groups of given name in output

--project <project>

List address groups according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Table 5.10. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 5.11. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 5.12. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.13. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.4. address group set

Set address group properties

Usage:

openstack address group set [-h] [--name <name>]
                                   [--description <description>]
                                   [--address <ip-address>]
                                   <address-group>

Table 5.14. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Table 5.15. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address group name

--description <description>

Set address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

5.5. address group show

Display address group details

Usage:

openstack address group show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-group>

Table 5.16. Positional arguments
ValueSummary

<address-group>

Address group to display (name or id)

Table 5.17. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 5.18. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 5.19. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.20. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 5.21. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.6. address group unset

Unset address group properties

Usage:

openstack address group unset [-h] [--address <ip-address>]
                                     <address-group>

Table 5.22. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Table 5.23. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--address <ip-address>

Ip address or cidr (repeat option to unset multiple addresses)

5.7. address scope create

Create a new Address Scope

Usage:

openstack address scope create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty] [--ip-version {4,6}]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      [--share | --no-share]
                                      <name>

Table 5.24. Positional arguments
ValueSummary

<name>

New address scope name

Table 5.25. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--ip-version {4,6}

Ip version (default is 4)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects (default)

Table 5.26. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 5.27. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.28. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 5.29. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.8. address scope delete

Delete address scope(s)

Usage:

openstack address scope delete [-h]
                                      <address-scope> [<address-scope> ...]

Table 5.30. Positional arguments
ValueSummary

<address-scope>

Address scope(s) to delete (name or id)

Table 5.31. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.9. address scope list

List address scopes

Usage:

openstack address scope list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>]
                                    [--ip-version <ip-version>]
                                    [--project <project>]
                                    [--project-domain <project-domain>]
                                    [--share | --no-share]

Table 5.32. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address scopes of given name in output

--ip-version <ip-version>

List address scopes of given ip version networks (4 or 6)

--project <project>

List address scopes according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

List address scopes shared between projects

--no-share

List address scopes not shared between projects

Table 5.33. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 5.34. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 5.35. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.36. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.10. address scope set

Set address scope properties

Usage:

openstack address scope set [-h] [--name <name>] [--share | --no-share]
                                   <address-scope>

Table 5.37. Positional arguments
ValueSummary

<address-scope>

Address scope to modify (name or id)

Table 5.38. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address scope name

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects

5.11. address scope show

Display address scope details

Usage:

openstack address scope show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-scope>

Table 5.39. Positional arguments
ValueSummary

<address-scope>

Address scope to display (name or id)

Table 5.40. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 5.41. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 5.42. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 5.43. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 5.44. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.