SupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 31. endpoint

This chapter describes the commands under the endpoint command.

31.1. endpoint add project

Associate a project to an endpoint

Usage:

openstack endpoint add project [-h] [--project-domain <project-domain>]
                                      <endpoint> <project>

Table 31.1. Positional arguments
ValueSummary

<endpoint>

Endpoint to associate with specified project (name or ID)

<project>

Project to associate with specified endpoint name or ID)

Table 31.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

31.2. endpoint create

Create new endpoint

Usage:

openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
                                 [-c COLUMN] [--noindent] [--prefix PREFIX]
                                 [--max-width <integer>] [--fit-width]
                                 [--print-empty] [--region <region-id>]
                                 [--enable | --disable]
                                 <service> <interface> <url>

Table 31.3. Positional arguments
ValueSummary

<service>

Service to be associated with new endpoint (name or ID)

<interface>

New endpoint interface type (admin, public or internal)

<url>

New endpoint url

Table 31.4. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--region <region-id>

New endpoint region id

--enable

Enable endpoint (default)

--disable

Disable endpoint

Table 31.5. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 31.6. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.7. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 31.8. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

31.3. endpoint delete

Delete endpoint(s)

Usage:

openstack endpoint delete [-h] <endpoint-id> [<endpoint-id> ...]

Table 31.9. Positional arguments
ValueSummary

<endpoint-id>

Endpoint(s) to delete (id only)

Table 31.10. Command arguments
ValueSummary

-h, --help

Show this help message and exit

31.4. endpoint group add project

Add a project to an endpoint group

Usage:

openstack endpoint group add project [-h]
                                            [--project-domain <project-domain>]
                                            <endpoint-group> <project>

Table 31.11. Positional arguments
ValueSummary

<endpoint-group>

Endpoint group (name or id)

<project>

Project to associate (name or id)

Table 31.12. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

31.5. endpoint group create

Create new endpoint group

Usage:

openstack endpoint group create [-h] [-f {json,shell,table,value,yaml}]
                                       [-c COLUMN] [--noindent]
                                       [--prefix PREFIX]
                                       [--max-width <integer>] [--fit-width]
                                       [--print-empty]
                                       [--description DESCRIPTION]
                                       <name> <filename>

Table 31.13. Positional arguments
ValueSummary

<name>

Name of the endpoint group

<filename>

Filename that contains a new set of filters

Table 31.14. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--description DESCRIPTION

Description of the endpoint group

Table 31.15. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 31.16. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.17. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 31.18. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

31.6. endpoint group delete

Delete endpoint group(s)

Usage:

openstack endpoint group delete [-h]
                                       <endpoint-group> [<endpoint-group> ...]

Table 31.19. Positional arguments
ValueSummary

<endpoint-group>

Endpoint group(s) to delete (name or id)

Table 31.20. Command arguments
ValueSummary

-h, --help

Show this help message and exit

31.7. endpoint group list

List endpoint groups

Usage:

openstack endpoint group list [-h] [-f {csv,json,table,value,yaml}]
                                     [-c COLUMN]
                                     [--quote {all,minimal,none,nonnumeric}]
                                     [--noindent] [--max-width <integer>]
                                     [--fit-width] [--print-empty]
                                     [--sort-column SORT_COLUMN]
                                     [--sort-ascending | --sort-descending]
                                     [--endpointgroup <endpoint-group> | --project <project>]
                                     [--domain <domain>]

Table 31.21. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--endpointgroup <endpoint-group>

Endpoint group (name or id)

--project <project>

Project (name or id)

--domain <domain>

Domain owning <project> (name or id)

Table 31.22. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 31.23. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 31.24. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.25. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

31.8. endpoint group remove project

Remove project from endpoint group

Usage:

openstack endpoint group remove project [-h]
                                               [--project-domain <project-domain>]
                                               <endpoint-group> <project>

Table 31.26. Positional arguments
ValueSummary

<endpoint-group>

Endpoint group (name or id)

<project>

Project to remove (name or id)

Table 31.27. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

31.9. endpoint group set

Set endpoint group properties

Usage:

openstack endpoint group set [-h] [--name <name>]
                                    [--filters <filename>]
                                    [--description <description>]
                                    <endpoint-group>

Table 31.28. Positional arguments
ValueSummary

<endpoint-group>

Endpoint group to modify (name or id)

Table 31.29. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

New enpoint group name

--filters <filename>

Filename that contains a new set of filters

--description <description>

New endpoint group description

31.10. endpoint group show

Display endpoint group details

Usage:

openstack endpoint group show [-h] [-f {json,shell,table,value,yaml}]
                                     [-c COLUMN] [--noindent]
                                     [--prefix PREFIX] [--max-width <integer>]
                                     [--fit-width] [--print-empty]
                                     <endpointgroup>

Table 31.30. Positional arguments
ValueSummary

<endpointgroup>

Endpoint group (name or id)

Table 31.31. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 31.32. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 31.33. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.34. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 31.35. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

31.11. endpoint list

List endpoints

Usage:

openstack endpoint list [-h] [-f {csv,json,table,value,yaml}]
                               [-c COLUMN]
                               [--quote {all,minimal,none,nonnumeric}]
                               [--noindent] [--max-width <integer>]
                               [--fit-width] [--print-empty]
                               [--sort-column SORT_COLUMN]
                               [--sort-ascending | --sort-descending]
                               [--service <service>] [--interface <interface>]
                               [--region <region-id>]
                               [--endpoint <endpoint-group> | --project <project>]
                               [--project-domain <project-domain>]

Table 31.36. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--service <service>

Filter by service (type, name or id)

--interface <interface>

Filter by interface type (admin, public or internal)

--region <region-id>

Filter by region id

--endpoint <endpoint-group>

Endpoint to list filters

--project <project>

Project to list filters (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Table 31.37. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 31.38. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 31.39. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.40. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

31.12. endpoint remove project

Dissociate a project from an endpoint

Usage:

openstack endpoint remove project [-h]
                                         [--project-domain <project-domain>]
                                         <endpoint> <project>

Table 31.41. Positional arguments
ValueSummary

<endpoint>

Endpoint to dissociate from specified project (name or ID)

<project>

Project to dissociate from specified endpoint name or ID)

Table 31.42. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

31.13. endpoint set

Set endpoint properties

Usage:

openstack endpoint set [-h] [--region <region-id>]
                              [--interface <interface>] [--url <url>]
                              [--service <service>] [--enable | --disable]
                              <endpoint-id>

Table 31.43. Positional arguments
ValueSummary

<endpoint-id>

Endpoint to modify (id only)

Table 31.44. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--region <region-id>

New endpoint region id

--interface <interface>

New endpoint interface type (admin, public or internal)

--url <url>

New endpoint url

--service <service>

New endpoint service (name or id)

--enable

Enable endpoint

--disable

Disable endpoint

31.14. endpoint show

Display endpoint details

Usage:

openstack endpoint show [-h] [-f {json,shell,table,value,yaml}]
                               [-c COLUMN] [--noindent] [--prefix PREFIX]
                               [--max-width <integer>] [--fit-width]
                               [--print-empty]
                               <endpoint>

Table 31.45. Positional arguments
ValueSummary

<endpoint>

Endpoint to display (endpoint id, service id, service name, service type)

Table 31.46. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 31.47. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 31.48. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 31.49. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 31.50. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.