이 콘텐츠는 선택한 언어로 제공되지 않습니다.
1.2. iSCSI
This section describes the iSCSI API and the
iscsiadm utility. Before using the iscsiadm utility, install the iscsi-initiator-utils package first; to do so, run yum install iscsi-initiator-utils.
In addition, the iSCSI service must be running in order to discover or log in to targets. To start the iSCSI service, run
service iscsi start
1.2.1. iSCSI API
To get information about running sessions, run:
iscsiadm -m session -P 3
This command displays the session/device state, session ID (sid), some negotiated parameters, and the SCSI devices accessible through the session.
For shorter output (for example, to display only the sid-to-node mapping), run:
iscsiadm -m session -P 0
or
iscsiadm -m session
These commands print the list of running sessions with the format:
driver [sid] target_ip:port,target_portal_group_tag proper_target_name
For example:
iscsiadm -m session
tcp [2] 10.15.84.19:3260,2 iqn.1992-08.com.netapp:sn.33615311 tcp [3] 10.15.85.19:3260,3 iqn.1992-08.com.netapp:sn.33615311
For more information about the iSCSI API, refer to
/usr/share/doc/iscsi-initiator-utils-version/README.
