이 콘텐츠는 선택한 언어로 제공되지 않습니다.
3.7.2. Using Implementations of TLS
Red Hat Enterprise Linux is distributed with several full-featured implementations of
TLS. In this section, the configuration of OpenSSL and GnuTLS is described. See Section 3.7.3, “Configuring Specific Applications” for instructions on how to configure TLS support in individual applications.
The available
TLS implementations offer support for various cipher suites that define all the elements that come together when establishing and using TLS-secured communications.
Use the tools included with the different implementations to list and specify cipher suites that provide the best possible security for your use case while considering the recommendations outlined in Section 3.7.1, “Choosing Algorithms to Enable”. The resulting cipher suites can then be used to configure the way individual applications negotiate and secure connections.
Important
Be sure to check your settings following every update or upgrade of the TLS implementation you use or the applications that utilize that implementation. New versions may introduce new cipher suites that you do not want to have enabled and that your current configuration does not disable.
3.7.2.1. Working with Cipher Suites in OpenSSL
OpenSSL is a toolkit and a cryptography library that support the
SSL and TLS protocols. On Red Hat Enterprise Linux, a configuration file is provided at /etc/pki/tls/openssl.cnf. The format of this configuration file is described in config(1).
To get a list of all cipher suites supported by your installation of OpenSSL, use the
openssl command with the ciphers subcommand as follows:
~]$ openssl ciphers -v 'ALL:COMPLEMENTOFALL'
Pass other parameters (referred to as cipher strings and keywords in OpenSSL documentation) to the
ciphers subcommand to narrow the output. Special keywords can be used to only list suites that satisfy a certain condition. For example, to only list suites that are defined as belonging to the HIGH group, use the following command:
~]$ openssl ciphers -v 'HIGH'
See the ciphers(1) manual page for a list of available keywords and cipher strings.
To obtain a list of cipher suites that satisfy the recommendations outlined in Section 3.7.1, “Choosing Algorithms to Enable”, use a command similar to the following:
~]$ openssl ciphers -v 'kEECDH+aECDSA+AES:kEECDH+AES+aRSA:kEDH+aRSA+AES' | column -t
ECDHE-ECDSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(256) Mac=AEAD
ECDHE-ECDSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AES(256) Mac=SHA384
ECDHE-ECDSA-AES256-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=AES(256) Mac=SHA1
ECDHE-ECDSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(128) Mac=AEAD
ECDHE-ECDSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AES(128) Mac=SHA256
ECDHE-ECDSA-AES128-SHA SSLv3 Kx=ECDH Au=ECDSA Enc=AES(128) Mac=SHA1
ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
ECDHE-RSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA384
ECDHE-RSA-AES256-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA1
ECDHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(128) Mac=AEAD
ECDHE-RSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES128-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(256) Mac=AEAD
DHE-RSA-AES256-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(256) Mac=SHA256
DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
DHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(128) Mac=AEAD
DHE-RSA-AES128-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(128) Mac=SHA256
DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
The above command omits all insecure ciphers, gives preference to
ephemeral elliptic curve Diffie-Hellman key exchange and ECDSA ciphers, and omits RSA key exchange (thus ensuring perfect forward secrecy).
Note that this is a rather strict configuration, and it might be necessary to relax the conditions in real-world scenarios to allow for a compatibility with a broader range of clients.
