Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

10.3. Expanding Volumes

Volumes can be expanded while the trusted storage pool is online and available. For example, you can add a brick to a distributed volume, which increases distribution and adds capacity to the Red Hat Gluster Storage volume. Similarly, you can add a group of bricks to a replicated or distributed replicated volume, which increases the capacity of the Red Hat Gluster Storage volume.

Note

When expanding replicated or distributed replicated volumes, the number of bricks being added must be a multiple of the replica count. For example, to expand a distributed replicated volume with a replica count of 2, you need to add bricks in multiples of 2 (such as 4, 6, 8, etc.).

Expanding a Volume

  1. From any server in the trusted storage pool, use the following command to probe the server on which you want to add a new brick : 
    # gluster peer probe HOSTNAME# gluster peer probe HOSTNAME
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster peer probe server5
Probe successful

# gluster peer probe server6
Probe successful
    Copy to Clipboard Toggle word wrap
  2. Add the bricks using the following command: 
    # gluster volume add-brick VOLNAME NEW_BRICK# gluster volume add-brick VOLNAME NEW_BRICK# gluster volume add-brick VOLNAME NEW_BRICK
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster volume add-brick test-volume server5:/exp5 server6:/exp6
Add Brick successful
    Copy to Clipboard Toggle word wrap
  3. Check the volume information using the following command: 
    # gluster volume info
    Copy to Clipboard Toggle word wrap
    The command output displays information similar to the following: 
    Volume Name: test-volume
Type: Distribute-Replicate
Status: Started
Number of Bricks: 6
Bricks:
Brick1: server1:/exp1
Brick2: server2:/exp2
Brick3: server3:/exp3
Brick4: server4:/exp4
Brick5: server5:/exp5
Brick6: server6:/exp6
    Copy to Clipboard Toggle word wrap
  4. Rebalance the volume to ensure that files will be distributed to the new brick. Use the rebalance command as described in Section 10.7, “Rebalancing Volumes”.
    The add-brick command should be followed by a rebalance operation to ensure better utilization of the added bricks.

10.3.1. Expanding a Tiered Volume
링크 복사

You can add a group of bricks to a cold tier volume and to the hot tier volume to increase the capacity of the Red Hat Gluster Storage volume.

10.3.1.1. Expanding a Cold Tier Volume
링크 복사

Expanding a cold tier volume is same as a non-tiered volume. If you are reusing the brick, ensure to perform the steps listed in “Reusing a Brick from a Deleted Volume” section.
  1. Detach the tier by performing the steps listed in Section 12.7, “Detaching a Tier from a Volume”
  2. From any server in the trusted storage pool, use the following command to probe the server on which you want to add a new brick : 
    # gluster peer probe HOSTNAME# gluster peer probe HOSTNAME
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster peer probe server5
Probe successful

# gluster peer probe server6
Probe successful
    Copy to Clipboard Toggle word wrap
  3. Add the bricks using the following command: 
    # gluster volume add-brick VOLNAME NEW_BRICK# gluster volume add-brick VOLNAME NEW_BRICK# gluster volume add-brick VOLNAME NEW_BRICK
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster volume add-brick test-volume server5:/exp5 server6:/exp6
    Copy to Clipboard Toggle word wrap
  4. Rebalance the volume to ensure that files will be distributed to the new brick. Use the rebalance command as described in Section 10.7, “Rebalancing Volumes”.
    The add-brick command should be followed by a rebalance operation to ensure better utilization of the added bricks.
  5. Reattach the tier to the volume with both old and new (expanded) bricks:
    # gluster volume tier VOLNAME attach [replica COUNT] NEW-BRICK...

    Important

    When you reattach a tier, an internal process called fix-layout commences internally to prepare the hot tier for use. This process takes time and there will a delay in starting the tiering activities.
    If you are reusing the brick, be sure to clearly wipe the existing data before attaching it to the tiered volume.

10.3.1.2. Expanding a Hot Tier Volume
링크 복사

You can expand a hot tier volume by attaching and adding bricks for the hot tier.
  1. Detach the tier by performing the steps listed in Section 12.7, “Detaching a Tier from a Volume”
  2. Reattach the tier to the volume with both old and new (expanded) bricks:
    # gluster volume tier VOLNAME attach [replica COUNT] NEW-BRICK...
    For example, 
    # gluster volume tier test-volume attach replica 2 server1:/exp5/tier5 server1:/exp6/tier6
server2:/exp7/tier7 server2:/exp8/tier8
    Copy to Clipboard Toggle word wrap

    Important

    When you reattach a tier, an internal process called fix-layout commences internally to prepare the hot tier for use. This process takes time and there will a delay in starting the tiering activities.
    If you are reusing the brick, be sure to clearly wipe the existing data before attaching it to the tiered volume.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat