Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

14.2. Starting a Container

Execute the following steps to start the container.
  1. Execute the following command to run the container: 
    # docker run -d --privileged=true --net=host --name <container-name> -v /run -v /etc/glusterfs:/etc/glusterfs:z -v /var/lib/glusterd:/var/lib/glusterd:z -v /var/log/glusterfs:/var/log/glusterfs:z -v /sys/fs/cgroup:/sys/fs/cgroup:ro -v /mnt/brick1:/mnt/container_brick1:z <image name>
    Copy to Clipboard Toggle word wrap
    where,
    • --net=host option ensures that the container has full access to the network stack of the host.
    • /mnt/brick1 is the mountpoint of the brick in the atomic host and :/mnt/container_brick1 is the mountpoint of the brick in the container.
    • -d option starts the container in the detached mode.
    For example: 
    # docker run -d --privileged=true --net=host --name glusternode1 -v /run -v /etc/glusterfs:/etc/glusterfs:z -v /var/lib/glusterd:/var/lib/glusterd:z -v /var/log/glusterfs:/var/log/glusterfs:z -v /sys/fs/cgroup:/sys/fs/cgroup:ro -v /mnt/brick1:/mnt/container_brick1:z rhgs3/rhgs-server-rhel7

5ac864b5abc74a925aecc4fe9613c73e83b8c54a846c36107aa8e2960eeb97b4
    Copy to Clipboard Toggle word wrap
    Where, 5ac864b5abc74a925aecc4fe9613c73e83b8c54a846c36107aa8e2960eeb97b4 is the container ID.

    Note

    • SELinux labels are automatically reset to svirt_sandbox_file_t so that the container can interact with the Atomic Host directory.
    • In the above command, the following ensures that the gluster configuration are persistent. 
      -v /etc/glusterfs:/etc/glusterfs:z -v /var/lib/glusterd:/var/lib/glusterd -v /var/log/glusterfs:/var/log/glusterfs
      Copy to Clipboard Toggle word wrap
  2. If you want to use snapshot then execute the following command: 
    # docker run -d --privileged=true --net=host --name <container-name> -v /dev:/dev -v /run -v /etc/glusterfs:/etc/glusterfs:z -v /var/lib/glusterd:/var/lib/glusterd:z -v /var/log/glusterfs:/var/log/glusterfs:z -v /sys/fs/cgroup:/sys/fs/cgroup:ro -v /mnt/brick1:/mnt/container_brick1:z <image name>
    Copy to Clipboard Toggle word wrap
    where, /mnt/brick1 is the mountpoint of the brick in the atomic host and :/mnt/container_brick1 is the mountpoint of the brick in the container.
    For example: 
    # docker run -d --privileged=true --net=host --name glusternode1 -v /dev:/dev -v /run -v /etc/glusterfs:/etc/glusterfs:z -v /var/lib/glusterd:/var/lib/glusterd:z -v /var/log/glusterfs:/var/log/glusterfs:z -v /sys/fs/cgroup:/sys/fs/cgroup:ro -v /mnt/brick1:/mnt/container_brick1:z rhgs3/rhgs-server-rhel7

5da2bc217c0852d2b1bfe4fb31e0181753410071584b4e38bd77d7502cd3e92b
    Copy to Clipboard Toggle word wrap
  3. To verify if the container is created, execute the following command: 
    # docker ps
    Copy to Clipboard Toggle word wrap
    For example: 
    # docker ps

CONTAINER ID        IMAGE               COMMAND                CREATED             STATUS                      PORTS               NAMES
5da2bc217c08        891ea0584e94        "/usr/sbin/init"       10 seconds ago      Up 9 seconds                                    glusternode1
    Copy to Clipboard Toggle word wrap
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat