Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

10.5. Starting Geo-replication on a Newly Added Brick or Node

10.5.1. Starting Geo-replication for a New Brick or New Node
링크 복사

If a geo-replication session is running, and a new node is added to the trusted storage pool or a brick is added to the volume from a newly added node in the trusted storage pool, then you must perform the following steps to start the geo-replication daemon on the new node:
  1. Run the following command on the master node where passwordless SSH connection is configured, in order to create a common pem pub file. 
    # gluster system:: execute gsec_create
    Copy to Clipboard Toggle word wrap
  2. Create the geo-replication session using the following command. The push-pem and force options are required to perform the necessary pem-file setup on the slave nodes. 
    # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL create push-pem force
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster volume geo-replication Volume1 example.com::slave-vol create push-pem force
    Copy to Clipboard Toggle word wrap

    Note

    There must be passwordless SSH access between the node from which this command is run, and the slave host specified in the above command. This command performs the slave verification, which includes checking for a valid slave URL, valid slave volume, and available space on the slave.
  3. After successfully setting up the shared storage volume, when a new node is added to the cluster, the shared storage is not mounted automatically on this node. Neither is the /etc/fstab entry added for the shared storage on this node. To make use of shared storage on this node, execute the following commands: 
    # mount -t glusterfs <local node's ip>:gluster_shared_storage
/var/run/gluster/shared_storage
# cp /etc/fstab /var/run/gluster/fstab.tmp
# echo "<local node's ip>:/gluster_shared_storage
/var/run/gluster/shared_storage/ glusterfs defaults 0 0" >> /etc/fstab
    Copy to Clipboard Toggle word wrap
    For more information on setting up shared storage volume, see Section 11.8, “Setting up Shared Storage Volume”.
  4. Configure the meta-volume for geo-replication: 
    # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL config use_meta_volume true
    Copy to Clipboard Toggle word wrap
    For example: 
    # gluster volume geo-replication Volume1 example.com::slave-vol config use_meta_volume true
    Copy to Clipboard Toggle word wrap
    For more information on configuring meta-volume, see Section 10.3.5, “Configuring a Meta-Volume”.
  5. If a node is added at slave, stop the geo-replication session using the following command: 
    # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL stop
    Copy to Clipboard Toggle word wrap
  6. Start the geo-replication session between the slave and master forcefully, using the following command: 
    # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL start force
    Copy to Clipboard Toggle word wrap
  7. Verify the status of the created session, using the following command: 
    # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL status
    Copy to Clipboard Toggle word wrap

10.5.2. Starting Geo-replication for a New Brick on an Existing Node
링크 복사

When adding a brick to the volume on an existing node in the trusted storage pool with a geo-replication session running, the geo-replication daemon on that particular node will automatically be restarted. The new brick will then be recognized by the geo-replication daemon. This is an automated process and no configuration changes are required.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat