Este conteúdo não está disponível no idioma selecionado.

Chapter 2. Service Mesh 2.x


2.1. About OpenShift Service Mesh

Note

Because Red Hat OpenShift Service Mesh releases on a different cadence from OpenShift Container Platform and because the Red Hat OpenShift Service Mesh Operator supports deploying multiple versions of the ServiceMeshControlPlane, the Service Mesh documentation does not maintain separate documentation sets for minor versions of the product. The current documentation set applies to the most recent version of Service Mesh unless version-specific limitations are called out in a particular topic or for a particular feature.

For additional information about the Red Hat OpenShift Service Mesh life cycle and supported platforms, refer to the Platform Life Cycle Policy.

2.1.1. Introduction to Red Hat OpenShift Service Mesh

Red Hat OpenShift Service Mesh addresses a variety of problems in a microservice architecture by creating a centralized point of control in an application. It adds a transparent layer on existing distributed applications without requiring any changes to the application code.

Microservice architectures split the work of enterprise applications into modular services, which can make scaling and maintenance easier. However, as an enterprise application built on a microservice architecture grows in size and complexity, it becomes difficult to understand and manage. Service Mesh can address those architecture problems by capturing or intercepting traffic between services and can modify, redirect, or create new requests to other services.

Service Mesh, which is based on the open source Istio project, provides an easy way to create a network of deployed services that provides discovery, load balancing, service-to-service authentication, failure recovery, metrics, and monitoring. A service mesh also provides more complex operational functionality, including A/B testing, canary releases, access control, and end-to-end authentication.

2.1.2. Core features

Red Hat OpenShift Service Mesh provides a number of key capabilities uniformly across a network of services:

  • Traffic Management - Control the flow of traffic and API calls between services, make calls more reliable, and make the network more robust in the face of adverse conditions.
  • Service Identity and Security - Provide services in the mesh with a verifiable identity and provide the ability to protect service traffic as it flows over networks of varying degrees of trustworthiness.
  • Policy Enforcement - Apply organizational policy to the interaction between services, ensure access policies are enforced and resources are fairly distributed among consumers. Policy changes are made by configuring the mesh, not by changing application code.
  • Telemetry - Gain understanding of the dependencies between services and the nature and flow of traffic between them, providing the ability to quickly identify issues.

2.2. Service Mesh Release Notes

2.2.1. Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.

2.2.2. Red Hat OpenShift Service Mesh version 2.6.4

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.6.4, and includes the following ServiceMeshControlPlane resource version updates: 2.6.4, 2.5.7, and 2.4.13.

This release addresses Common Vulnerabilities and Exposures (CVEs) and is supported on OpenShift Container Platform 4.14 and later.

The most current version of the Red Hat OpenShift Service Mesh Operator can be used with all supported versions of Service Mesh. The version of Service Mesh is specified using the ServiceMeshControlPlane.

The most current version of the Kiali Operator provided by Red Hat can be used with all supported versions of Red Hat OpenShift Service Mesh. The version of Service Mesh is specified by using the ServiceMeshControlPlane resource. The version of Service Mesh automatically ensures a compatible version of Kiali.

2.2.2.1. Component updates

ComponentVersion

Istio

1.20.8

Envoy Proxy

1.28.7

Kiali Server

1.73.17

2.2.3. Red Hat OpenShift Service Mesh version 2.5.7

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.4 and is supported on OpenShift Container Platform 4.14 and later. This release addresses Common Vulnerabilities and Exposures (CVEs).

2.2.3.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali Server

1.73.17

2.2.4. Red Hat OpenShift Service Mesh version 2.4.13

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.4 and is supported on OpenShift Container Platform 4.14 and later. This release addresses Common Vulnerabilities and Exposures (CVEs).

2.2.4.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali Server

1.65.18

2.2.5. Red Hat OpenShift Service Mesh version 2.6.3

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.6.3, and includes the following ServiceMeshControlPlane resource version updates: 2.6.3, 2.5.6, and 2.4.12.

This release addresses Common Vulnerabilities and Exposures (CVEs) and is supported on OpenShift Container Platform 4.14 and later.

The most current version of the Kiali Operator provided by Red Hat can be used with all supported versions of Red Hat OpenShift Service Mesh. The version of Service Mesh is specified by using the ServiceMeshControlPlane resource. The version of Service Mesh automatically ensures a compatible version of Kiali.

2.2.5.1. Component updates

ComponentVersion

Istio

1.20.8

Envoy Proxy

1.28.7

Kiali Server

1.73.16

2.2.6. Red Hat OpenShift Service Mesh version 2.5.6

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.3, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.6.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali Server

1.73.16

2.2.7. Red Hat OpenShift Service Mesh version 2.4.12

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.3, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.7.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali Server

1.65.17

2.2.8. Red Hat OpenShift Service Mesh version 2.6.2

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.6.2, and includes the following ServiceMeshControlPlane resource version updates: 2.6.2, 2.5.5 and 2.4.11.

This release addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.14 and later.

The most current version of the Kiali Operator provided by Red Hat can be used with all supported versions of Red Hat OpenShift Service Mesh. The version of Service Mesh is specified by using the ServiceMeshControlPlane resource. The version of Service Mesh automatically ensures a compatible version of Kiali.

2.2.8.1. Component updates

ComponentVersion

Istio

1.20.8

Envoy Proxy

1.28.7

Kiali Server

1.73.15

2.2.8.2. New features

  • The cert-manager Operator for Red Hat OpenShift is now supported on IBM Power, IBM Z, and IBM® LinuxONE.

2.2.8.3. Fixed issues

  • OSSM-8099 Previously, there was an issue supporting persistent session labels when the endpoints were in the draining phase. Now, there is a method of handling draining endpoints for the stateful header sessions.
  • OSSM-8001 Previously, when runAsUser and runAsGroup were set to the same value in pods, the proxy GID was incorrectly set to match the container’s GID, causing traffic interception issues with iptables rules applied by Istio CNI. Now, containers can have the same value for runAsUser and runAsGroup, and iptables rules apply correctly.
  • OSSM-8074 Previously, the Kiali Operator failed to install the Kiali server when a Service Mesh had a numeric-only namespace (e.g., 12345). Now, namespaces with only numerals work correctly.

2.2.9. Red Hat OpenShift Service Mesh version 2.5.5

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.2, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.9.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali Server

1.73.15

2.2.9.2. Fixed issues

  • OSSM-8001 Previously, when the runAsUser and runAsGroup parameters were set to the same value in pods, the proxy GID was incorrectly set to match the container’s GID, causing traffic interception issues with iptables rules applied by Istio CNI. Now, containers can have the same value for the runAsUser and runAsGroup parameters, and iptables rules apply correctly.
  • OSSM-8074 Previously, the Kiali Operator provided by Red Hat failed to install the Kiali Server when a Service Mesh had a numeric-only namespace (e.g., 12345). Now, namespaces with only numerals work correctly.

2.2.10. Red Hat OpenShift Service Mesh version 2.4.11

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.2, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.10.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali Server

1.65.16

2.2.10.2. Fixed issues

  • OSSM-8001 Previously, when the runAsUser and runAsGroup parameters were set to the same value in pods, the proxy GID was incorrectly set to match the container’s GID, causing traffic interception issues with iptables rules applied by Istio CNI. Now, containers can have the same value for the runAsUser and runAsGroup parameters, and iptables rules apply correctly.
  • OSSM-8074 Previously, the Kiali Operator provided by Red Hat failed to install the Kiali Server when a Service Mesh had a numeric-only namespace (e.g., 12345). Now, namespaces with only numerals work correctly.

2.2.11. Red Hat OpenShift Service Mesh version 2.6.1

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.6.1, and includes the following ServiceMeshControlPlane resource version updates: 2.6.1, 2.5.4 and 2.4.10. This release addresses Common Vulnerabilities and Exposures (CVEs), contains a bug fix, and is supported on OpenShift Container Platform 4.14 and later.

The most current version of the Kiali Operator provided by Red Hat can be used with all supported versions of Red Hat OpenShift Service Mesh. The version of Service Mesh is specified by using the ServiceMeshControlPlane resource. The version of Service Mesh automatically ensures a compatible version of Kiali.

2.2.11.1. Component updates

ComponentVersion

Istio

1.20.8

Envoy Proxy

1.28.5

Kiali Server

1.73.14

2.2.11.2. Fixed issues

  • OSSM-6766 Previously, the OpenShift Service Mesh Console (OSSMC) plugin failed if the user wanted to update a namespace (for example, enabling or disabling injection), or create any Istio object (for example, creating traffic policies). Now, the OpenShift Service Mesh Console (OSSMC) plugin does not fail if the user updates a namespace or creates any Istio object.

2.2.12. Red Hat OpenShift Service Mesh version 2.5.4

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.1, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.12.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali Server

1.73.14

2.2.13. Red Hat OpenShift Service Mesh version 2.4.10

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.1, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

2.2.13.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali Server

1.65.15

2.2.14. Red Hat OpenShift Service Mesh version 2.6.0

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.6.0, and includes the following ServiceMeshControlPlane resource version updates: 2.6.0, 2.5.3 and 2.4.9. This release adds new features, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.14 and later.

This release ends maintenance support for Red Hat OpenShift Service Mesh version 2.3. If you are using Service Mesh version 2.3, you should update to a supported version.

Important

Red Hat OpenShift Service Mesh is designed for FIPS. Service Mesh uses the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on the x86_64, ppc64le, and s390x architectures. For more information about the NIST validation program, see Cryptographic Module Validation Program. For the latest NIST status for the individual versions of RHEL cryptographic libraries that have been submitted for validation, see Compliance Activities and Government Standards.

2.2.14.1. Component updates

ComponentVersion

Istio

1.20.8

Envoy Proxy

1.28.5

Kiali

1.73.9

2.2.14.2. Istio 1.20 support

Service Mesh 2.6 is based on Istio 1.20, which provides new features and product enhancements, including:

  • Native sidecars are supported on OpenShift Container Platform 4.16 or later.

    Example ServiceMeshControlPlane resource

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
    spec:
      runtime:
        components:
          pilot:
            container:
              env:
                ENABLE_NATIVE_SIDECARS: "true"

  • Traffic mirroring in Istio 1.20 now supports multiple destinations. This feature enables the mirroring of traffic to various endpoints, allowing for simultaneous observation across different service versions or configurations.

While Red Hat OpenShift Service Mesh supports many Istio 1.20 features, the following exceptions should be noted:

  • Ambient mesh is not supported
  • QuickAssist Technology (QAT) PrivateKeyProvider in Istio is not supported

2.2.14.3. Istio and Kiali bundle image name changes

This release updates the Istio bundle image name and the Kiali bundle image name to better align with Red Hat naming conventions.

  • Istio bundle image name: openshift-service-mesh/istio-operator-bundle
  • Kiali bundle image name: openshift-service-mesh/kiali-operator-bundle

2.2.14.4. Integration with Red Hat OpenShift distributed tracing platform (Tempo) and Red Hat build of OpenTelemetry

This release introduces a generally available integration of the tracing extension provider(s) Red Hat OpenShift distributed tracing platform (Tempo) and Red Hat build of OpenTelemetry.

You can expose tracing data to the Red Hat OpenShift distributed tracing platform (Tempo) by appending a named element and the opentelemetry provider to the spec.meshConfig.extensionProviders specification in the ServiceMehControlPlane resource. Then, a telemetry custom resource configures Istio proxies to collect trace spans and send them to the OpenTelemetry Collector endpoint.

You can create a Red Hat build of OpenTelemetry instance in a mesh namespace and configure it to send tracing data to a tracing platform backend service.

Note

Red Hat OpenShift distributed tracing platform (Tempo) Stack is not supported on IBM Z.

2.2.14.5. Red Hat OpenShift distributed tracing platform (Jaeger) default setting change

This release disables Red Hat OpenShift distributed tracing platform (Jaeger) by default for new instances of the ServiceMeshControlPlane resource.

When updating existing instances of the ServiceMeshControlPlane resource to Red Hat OpenShift Service Mesh version 2.6, distributed tracing platform (Jaeger) remains enabled by default.

Red Hat OpenShift Service Mesh 2.6 is the last release that includes support for Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator. Both distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator will be removed in the next release. If you are currently using distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator, you need to switch to Red Hat OpenShift distributed tracing platform (Tempo) and Red Hat build of OpenTelemetry.

2.2.14.6. Gateway API use is generally available for Red Hat OpenShift Service Mesh cluster-wide deployments

This release introduces the General Availability for using the Kubernetes Gateway API version 1.0.0 with Red Hat OpenShift Service Mesh 2.6. This API use is limited to Red Hat OpenShift Service Mesh. The Gateway API custom resource definitions (CRDs) are not supported.

Gateway API is now enabled by default if cluster-wide mode is enabled (spec.mode: ClusterWide). It can be enabled even if the custom resource definitions (CRDs) are not installed in the cluster.

Important

Gateway API for multitenant mesh deployments is still in Technology Preview.

Refer to the following table to determine which Gateway API version should be installed with the OpenShift Service Mesh version you are using:

Service Mesh VersionIstio VersionGateway API VersionNotes

2.6

1.20.x

1.0.0

N/A

2.5.x

1.18.x

0.6.2

Use the experimental branch because ReferenceGrand is missing in v0.6.2.

2.4.x

1.16.x

0.5.1

For multitenant mesh deployment, all Gateway API CRDs must be present. Use the experimental branch.

You can disable this feature by setting PILOT_ENABLE_GATEWAY_API to false:

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  runtime:
    components:
      pilot:
        container:
          env:
            PILOT_ENABLE_GATEWAY_API: "false"

2.2.14.7. Fixed issues

  • OSSM-6754 Previously, in OpenShift Container Platform 4.15, when users navigated to a Service details page, clicked the Service Mesh tab, and refreshed the page, the Service Mesh details page remained stuck on Service Mesh content information, even though the active tab was the default Details tab. Now, after a refresh, users can navigate through the different tabs of the Service details page without issue.
  • OSSM-2101 Previously, the Istio Operator never deleted the istio-cni-node DaemonSet and other CNI resources when they were no longer needed. Now, after upgrading the Operator, if there is at least one SMCP installed in the cluster, the Operator reconciles this SMCP, and then deletes all unused CNI installations (even very old CNI versions as early as v2.0).

2.2.14.8. Kiali known issues

  • OSSM-6099 Installing the OpenShift Service Mesh Console (OSSMC) plugin fails on an IPv6 cluster.

    Workaround: Install the OSSMC plugin on an IPv4 cluster.

2.2.15. Red Hat OpenShift Service Mesh version 2.5.3

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.0, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.12 and later.

2.2.15.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali

1.73.9

2.2.16. Red Hat OpenShift Service Mesh version 2.4.9

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.6.0, addresses Common Vulnerabilities and Exposures (CVEs), and is supported on OpenShift Container Platform 4.12 and later.

2.2.16.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali

1.65.11

2.2.17. Red Hat OpenShift Service Mesh version 2.5.2

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.5.2, and includes the following ServiceMeshControlPlane resource version updates: 2.5.2, 2.4.8 and 2.3.12. This release addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.17.1. Component updates

ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali

1.73.8

2.2.17.2. Fixed issues

  • OSSM-6331 Previously, the smcp.general.logging.componentLevels spec accepted invalid LogLevel values, and the ServiceMeshControlPlane resource was still created. Now, the terminal shows an error message if an invalid value is used, and the control plane is not created.
  • OSSM-6290 Previously, the Project filter drop-down of the Istio Config list page did not work correctly. All istio config items were displayed from all namespaces even if you selected a specific project from the drop-down menu. Now, only the istio config items that belong to the selected project in the filter drop-down are displayed.
  • OSSM-6298 Previously, when you clicked an item reference within the OpenShift Service Mesh Console (OSSMC) plugin, the console sometimes performed multiple redirects before opening the desired page. As a result, navigating back to the previous page that was open in the console caused your web browser to open the wrong page. Now, these redirects do not occur, and clicking Back in a web browser opens the correct page.
  • OSSM-6299 Previously, in OpenShift Container Platform 4.15, when you clicked the Node graph menu option of any node menu within the traffic graph, the node graph was not displayed. Instead, the page refreshed with the same traffic graph. Now, clicking the Node graph menu option correctly displays the node graph.
  • OSSM-6267 Previously, configuring a data source in Red Hat OpenShift Service Mesh 2.5 Grafana caused a data query authentication error, and users could not view data in the Istio service and workload dashboards. Now, upgrading an existing 2.5 SMCP to version 2.5.2 or later resolves the Grafana error.

2.2.18. Red Hat OpenShift Service Mesh version 2.4.8

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.2, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

The most current version of the Red Hat OpenShift Service Mesh Operator can be used with all supported versions of Service Mesh. The version of Service Mesh is specified using the ServiceMeshControlPlane.

2.2.18.1. Component updates

ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali

1.65.11

2.2.19. Red Hat OpenShift Service Mesh version 2.3.12

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.2, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

The most current version of the Red Hat OpenShift Service Mesh Operator can be used with all supported versions of Service Mesh. The version of Service Mesh is specified using the ServiceMeshControlPlane resource.

2.2.19.1. Component updates

ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Kiali

1.57.14

2.2.20. Previous releases

These previous releases added features and improvements.

2.2.20.1. New features Red Hat OpenShift Service Mesh version 2.5.1

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.5.1, and includes the following ServiceMeshControlPlane resource version updates: 2.5.1, 2.4.7 and 2.3.11.

This release addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.20.1.1. Component versions for Red Hat OpenShift Service Mesh version 2.5.1
ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali

1.73.7

2.2.20.2. New features Red Hat OpenShift Service Mesh version 2.5

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.5.0, and includes the following ServiceMeshControlPlane resource version updates: 2.5.0, 2.4.6 and 2.3.10.

This release adds new features, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

This release ends maintenance support for OpenShift Service Mesh version 2.2. If you are using OpenShift Service Mesh version 2.2, you should update to a supported version.

2.2.20.2.1. Component versions for Red Hat OpenShift Service Mesh version 2.5
ComponentVersion

Istio

1.18.7

Envoy Proxy

1.26.8

Kiali

1.73.4

2.2.20.2.2. Istio 1.18 support

Service Mesh 2.5 is based on Istio 1.18, which brings in new features and product enhancements. While Red Hat OpenShift Service Mesh supports many Istio 1.18 features, the following exceptions should be noted:

  • Ambient mesh is not supported
  • QuickAssist Technology (QAT) PrivateKeyProvider in Istio is not supported
2.2.20.2.3. Cluster-Wide mesh migration

This release adds documentation for migrating from a multitenant mesh to a cluster-wide mesh. For more information, see the following documentation:

  • "About migrating to a cluster-wide mesh"
  • "Excluding namespaces from a cluster-wide mesh"
  • "Defining which namespaces receive sidecar injection in a cluster-wide mesh"
  • "Excluding individual pods from a cluster-wide mesh"
2.2.20.2.4. Red Hat OpenShift Service Mesh Operator on ARM-based clusters

This release provides the Red Hat OpenShift Service Mesh Operator on ARM-based clusters as a generally available feature.

2.2.20.2.5. Integration with Red Hat OpenShift distributed tracing platform (Tempo) Stack

This release introduces a generally available integration of the tracing extension provider(s). You can expose tracing data to the Red Hat OpenShift distributed tracing platform (Tempo) stack by appending a named element and the zipkin provider to the spec.meshConfig.extensionProviders specification. Then, a telemetry custom resource configures Istio proxies to collect trace spans and send them to the Tempo distributor service endpoint.

Note

Red Hat OpenShift distributed tracing platform (Tempo) Stack is not supported on IBM Z.

2.2.20.2.6. OpenShift Service Mesh Console plugin

This release introduces a generally available version of the OpenShift Service Mesh Console (OSSMC) plugin.

The OSSMC plugin is an extension to the OpenShift Console that provides visibility into your Service Mesh. With the OSSMC plugin installed, a new Service Mesh menu option is available on the navigation pane of the web console, as well as new Service Mesh tabs that enhance existing Workloads and Service console pages.

The features of the OSSMC plugin are very similar to those of the standalone Kiali Console. The OSSMC plugin does not replace the Kiali Console, and after installing the OSSMC plugin, you can still access the standalone Kiali Console.

2.2.20.2.7. Istio OpenShift Routing (IOR) default setting change

The default setting for Istio OpenShift Routing (IOR) has changed. Starting with this release, automatic routes are disabled by default for new instances of the ServiceMeshControlPlane resource.

For new instances of the ServiceMeshControlPlane resources, you can use automatic routes by setting the enabled field to true in the gateways.openshiftRoute specification of the ServiceMeshControlPlane resource.

Example ServiceMeshControlPlane resource

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  gateways:
    openshiftRoute:
      enabled: true

When updating existing instances of the ServiceMeshControlPlane resource to Red Hat OpenShift Service Mesh version 2.5, automatic routes remain enabled by default.

2.2.20.2.8. Istio proxy concurrency configuration enhancement

The concurrency parameter in the networking.istio API configures how many worker threads the Istio proxy runs.

For consistency across deployments, Istio now configures the concurrency parameter based upon the CPU limit allocated to the proxy container. For example, a limit of 2500m would set the concurrency parameter to 3. If you set the concurrency parameter to a different value, then Istio uses that value to configure how many threads the proxy runs instead of using the CPU limit.

Previously, the default setting for the parameter was 2.

2.2.20.2.9. Gateway API CRD versions
Important

OpenShift Container Platform Gateway API support is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

A new version of the Gateway API custom resource definition (CRD) is now available. Refer to the following table to determine which Gateway API version should be installed with the OpenShift Service Mesh version you are using:

Service Mesh VersionIstio VersionGateway API VersionNotes

2.5.x

1.18.x

0.6.2

Use the experimental branch because ReferenceGrand is missing in v0.6.2

2.4.x

1.16.x

0.5.1

For multitenant mesh deployment, all Gateway API CRDs must be present. Use the experimental branch.

2.2.20.3. New features Red Hat OpenShift Service Mesh version 2.4.7

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.1, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.20.3.1. Component versions for Red Hat OpenShift Service Mesh version 2.4.7
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali

1.65.11

2.2.20.4. New features Red Hat OpenShift Service Mesh version 2.4.6

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.0, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.20.4.1. Component versions for Red Hat OpenShift Service Mesh version 2.4.6
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali

1.65.11

2.2.20.5. New features Red Hat OpenShift Service Mesh version 2.4.5

This release of Red Hat OpenShift Service Mesh updates the Red Hat OpenShift Service Mesh Operator version to 2.4.5, and includes the following ServiceMeshControlPlane resource version updates: 2.4.5, 2.3.9 and 2.2.12.

This release addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later.

2.2.20.5.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4.5
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Kiali

1.65.11

2.2.20.6. New features Red Hat OpenShift Service Mesh version 2.4.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later versions.

2.2.20.6.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4.4
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.12

Jaeger

1.47.0

Kiali

1.65.10

2.2.20.7. New features Red Hat OpenShift Service Mesh version 2.4.3

  • The Red Hat OpenShift Service Mesh Operator is now available on ARM-based clusters as a Technology Preview feature.
  • The envoyExtAuthzGrpc field has been added, which is used to configure an external authorization provider using the gRPC API.
  • Common Vulnerabilities and Exposures (CVEs) have been addressed.
  • This release is supported on OpenShift Container Platform 4.10 and newer versions.
2.2.20.7.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4.3
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.10

Jaeger

1.42.0

Kiali

1.65.8

2.2.20.7.2. Red Hat OpenShift Service Mesh operator to ARM-based clusters
Important

Red Hat OpenShift Service Mesh operator to ARM based clusters is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

This release makes the Red Hat OpenShift Service Mesh Operator available on ARM-based clusters as a Technology Preview feature. Images are available for Istio, Envoy, Prometheus, Kiali, and Grafana. Images are not available for Jaeger, so Jaeger must be disabled as a Service Mesh add-on.

2.2.20.7.3. Remote Procedure Calls (gRPC) API support for external authorization configuration

This enhancement adds the envoyExtAuthzGrpc field to configure an external authorization provider using the gRPC API.

2.2.20.8. New features Red Hat OpenShift Service Mesh version 2.4.2

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.8.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4.2
ComponentVersion

Istio

1.16.7

Envoy Proxy

1.24.10

Jaeger

1.42.0

Kiali

1.65.7

2.2.20.9. New features Red Hat OpenShift Service Mesh version 2.4.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.9.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4.1
ComponentVersion

Istio

1.16.5

Envoy Proxy

1.24.8

Jaeger

1.42.0

Kiali

1.65.7

2.2.20.10. New features Red Hat OpenShift Service Mesh version 2.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.10.1. Component versions included in Red Hat OpenShift Service Mesh version 2.4
ComponentVersion

Istio

1.16.5

Envoy Proxy

1.24.8

Jaeger

1.42.0

Kiali

1.65.6

2.2.20.10.2. Cluster-wide deployments

This enhancement introduces a generally available version of cluster-wide deployments. A cluster-wide deployment contains a service mesh control plane that monitors resources for an entire cluster. The control plane uses a single query across all namespaces to monitor each Istio or Kubernetes resource that affects the mesh configuration. Reducing the number of queries the control plane performs in a cluster-wide deployment improves performance.

2.2.20.10.3. Support for discovery selectors

This enhancement introduces a generally available version of the meshConfig.discoverySelectors field, which can be used in cluster-wide deployments to limit the services the service mesh control plane can discover.

spec:
  meshConfig
    discoverySelectors:
    - matchLabels:
        env: prod
        region: us-east1
    - matchExpressions:
      - key: app
        operator: In
        values:
          - cassandra
          - spark
2.2.20.10.4. Integration with cert-manager istio-csr

With this update, Red Hat OpenShift Service Mesh integrates with the cert-manager controller and the istio-csr agent. cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing, and using those certificates. cert-manager provides and rotates an intermediate CA certificate for Istio. Integration with istio-csr enables users to delegate signing certificate requests from Istio proxies to cert-manager. ServiceMeshControlPlane v2.4 accepts CA certificates provided by cert-manager as cacerts secret.

Note

Integration with cert-manager and istio-csr is not supported on IBM Power®, IBM Z®, and IBM® LinuxONE.

2.2.20.10.5. Integration with external authorization systems

This enhancement introduces a generally available method of integrating Red Hat OpenShift Service Mesh with external authorization systems by using the action: CUSTOM field of the AuthorizationPolicy resource. Use the envoyExtAuthzHttp field to delegate the access control to an external authorization system.

2.2.20.10.6. Integration with external Prometheus installation

This enhancement introduces a generally available version of the Prometheus extension provider. You can expose metrics to the OpenShift Container Platform monitoring stack or a custom Prometheus installation by setting the value of the extensionProviders field to prometheus in the spec.meshConfig specification. The telemetry object configures Istio proxies to collect traffic metrics. Service Mesh only supports the Telemetry API for Prometheus metrics.

spec:
  meshConfig:
    extensionProviders:
    - name: prometheus
      prometheus: {}
---
apiVersion: telemetry.istio.io/v1alpha1
kind: Telemetry
metadata:
  name: enable-prometheus-metrics
spec:
  metrics:
  - providers:
    - name: prometheus
2.2.20.10.7. Single stack IPv6 support

This enhancement introduces generally available support for single stack IPv6 clusters, providing access to a broader range of IP addresses. Dual stack IPv4 or IPv6 cluster is not supported.

Note

Single stack IPv6 support is not available on IBM Power®, IBM Z®, and IBM® LinuxONE.

2.2.20.10.8. OpenShift Container Platform Gateway API support
Important

OpenShift Container Platform Gateway API support is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

This enhancement introduces an updated Technology Preview version of the OpenShift Container Platform Gateway API. By default, the OpenShift Container Platform Gateway API is disabled.

2.2.20.10.8.1. Enabling OpenShift Container Platform Gateway API

To enable the OpenShift Container Platform Gateway API, set the value of the enabled field to true in the techPreview.gatewayAPI specification of the ServiceMeshControlPlane resource.

spec:
  techPreview:
    gatewayAPI:
      enabled: true

Previously, environment variables were used to enable the Gateway API.

spec:
  runtime:
    components:
      pilot:
        container:
          env:
            PILOT_ENABLE_GATEWAY_API: "true"
            PILOT_ENABLE_GATEWAY_API_STATUS: "true"
            PILOT_ENABLE_GATEWAY_API_DEPLOYMENT_CONTROLLER: "true"
2.2.20.10.9. Control plane deployment on infrastructure nodes

Service Mesh control plane deployment is now supported and documented on OpenShift infrastructure nodes. For more information, see the following documentation:

  • Configuring all Service Mesh control plane components to run on infrastructure nodes
  • Configuring individual Service Mesh control plane components to run on infrastructure nodes
2.2.20.10.10. Istio 1.16 support

Service Mesh 2.4 is based on Istio 1.16, which brings in new features and product enhancements. While many Istio 1.16 features are supported, the following exceptions should be noted:

  • HBONE protocol for sidecars is an experimental feature that is not supported.
  • Service Mesh on ARM64 architecture is not supported.
  • OpenTelemetry API remains a Technology Preview feature.

2.2.20.11. New features Red Hat OpenShift Service Mesh version 2.3.11

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.1, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.20.11.1. Component versions for Red Hat OpenShift Service Mesh version 2.3.11
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Kiali

1.57.14

2.2.20.12. New features Red Hat OpenShift Service Mesh version 2.3.10

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.5.0, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.12 and later.

2.2.20.12.1. Component versions for Red Hat OpenShift Service Mesh version 2.3.10
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Kiali

1.57.14

2.2.20.13. New features Red Hat OpenShift Service Mesh version 2.3.9

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.4.5, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later.

2.2.20.13.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.9
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Jaeger

1.47.0

Kiali

1.57.14

2.2.20.14. New features Red Hat OpenShift Service Mesh version 2.3.8

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later versions.

2.2.20.14.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.8
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Jaeger

1.47.0

Kiali

1.57.13

2.2.20.15. New features Red Hat OpenShift Service Mesh version 2.3.7

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.15.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.7
ComponentVersion

Istio

1.14.6

Envoy Proxy

1.22.11

Jaeger

1.42.0

Kiali

1.57.11

2.2.20.16. New features Red Hat OpenShift Service Mesh version 2.3.6

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.16.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.6
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.11

Jaeger

1.42.0

Kiali

1.57.10

2.2.20.17. New features Red Hat OpenShift Service Mesh version 2.3.5

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.17.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.5
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.9

Jaeger

1.42.0

Kiali

1.57.10

2.2.20.18. New features Red Hat OpenShift Service Mesh version 2.3.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.18.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.4
ComponentVersion

Istio

1.14.6

Envoy Proxy

1.22.9

Jaeger

1.42.0

Kiali

1.57.9

2.2.20.19. New features Red Hat OpenShift Service Mesh version 2.3.3

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.19.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.3
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.9

Jaeger

1.42.0

Kiali

1.57.7

2.2.20.20. New features Red Hat OpenShift Service Mesh version 2.3.2

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.20.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.2
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.7

Jaeger

1.39

Kiali

1.57.6

2.2.20.21. New features Red Hat OpenShift Service Mesh version 2.3.1

This release of Red Hat OpenShift Service Mesh introduces new features, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.21.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3.1
ComponentVersion

Istio

1.14.5

Envoy Proxy

1.22.4

Jaeger

1.39

Kiali

1.57.5

2.2.20.22. New features Red Hat OpenShift Service Mesh version 2.3

This release of Red Hat OpenShift Service Mesh introduces new features, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.22.1. Component versions included in Red Hat OpenShift Service Mesh version 2.3
ComponentVersion

Istio

1.14.3

Envoy Proxy

1.22.4

Jaeger

1.38

Kiali

1.57.3

2.2.20.22.2. New Container Network Interface (CNI) DaemonSet container and ConfigMap

The openshift-operators namespace includes a new istio CNI DaemonSet istio-cni-node-v2-3 and a new ConfigMap resource, istio-cni-config-v2-3.

When upgrading to Service Mesh Control Plane 2.3, the existing istio-cni-node DaemonSet is not changed, and a new istio-cni-node-v2-3 DaemonSet is created.

This name change does not affect previous releases or any istio-cni-node CNI DaemonSet associated with a Service Mesh Control Plane deployed using a previous release.

2.2.20.22.3. Gateway injection support

This release introduces generally available support for Gateway injection. Gateway configurations are applied to standalone Envoy proxies that are running at the edge of the mesh, rather than the sidecar Envoy proxies running alongside your service workloads. This enables the ability to customize gateway options. When using gateway injection, you must create the following resources in the namespace where you want to run your gateway proxy: Service, Deployment, Role, and RoleBinding.

2.2.20.22.4. Istio 1.14 Support

Service Mesh 2.3 is based on Istio 1.14, which brings in new features and product enhancements. While many Istio 1.14 features are supported, the following exceptions should be noted:

  • ProxyConfig API is supported with the exception of the image field.
  • Telemetry API is a Technology Preview feature.
  • SPIRE runtime is not a supported feature.
2.2.20.22.5. OpenShift Service Mesh Console
Important

OpenShift Service Mesh Console is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

This release introduces a Technology Preview version of the OpenShift Container Platform Service Mesh Console, which integrates the Kiali interface directly into the OpenShift web console. For additional information, see Introducing the OpenShift Service Mesh Console (A Technology Preview)

2.2.20.22.6. Cluster-wide deployment
Important

Cluster-wide deployment is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

This release introduces cluster-wide deployment as a Technology Preview feature. A cluster-wide deployment contains a Service Mesh Control Plane that monitors resources for an entire cluster. The control plane uses a single query across all namespaces to monitor each Istio or Kubernetes resource kind that affects the mesh configuration. In contrast, the multitenant approach uses a query per namespace for each resource kind. Reducing the number of queries the control plane performs in a cluster-wide deployment improves performance.

Note

This cluster-wide deployment documentation is only applicable for control planes deployed using SMCP v2.3. cluster-wide deployments created using SMCP v2.3 are not compatible with cluster-wide deployments created using SMCP v2.4.

2.2.20.22.6.1. Configuring cluster-wide deployment

The following example ServiceMeshControlPlane object configures a cluster-wide deployment.

To create an SMCP for cluster-wide deployment, a user must belong to the cluster-admin ClusterRole. If the SMCP is configured for cluster-wide deployment, it must be the only SMCP in the cluster. You cannot change the control plane mode from multitenant to cluster-wide (or from cluster-wide to multitenant). If a multitenant control plane already exists, delete it and create a new one.

This example configures the SMCP for cluster-wide deployment.

  apiVersion: maistra.io/v2
  kind: ServiceMeshControlPlane
  metadata:
    name: cluster-wide
    namespace: istio-system
  spec:
    version: v2.3
    techPreview:
      controlPlaneMode: ClusterScoped 1
1
Enables Istiod to monitor resources at the cluster level rather than monitor each individual namespace.

Additionally, the SMMR must also be configured for cluster-wide deployment. This example configures the SMMR for cluster-wide deployment.

  apiVersion: maistra.io/v1
  kind: ServiceMeshMemberRoll
  metadata:
    name: default
  spec:
    members:
    - '*' 1
1
Adds all namespaces to the mesh, including any namespaces you subsequently create. The following namespaces are not part of the mesh: kube, openshift, kube-* and openshift-*.

2.2.20.23. New features Red Hat OpenShift Service Mesh version 2.2.12

This release of Red Hat OpenShift Service Mesh is included with the Red Hat OpenShift Service Mesh Operator 2.4.5, addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later.

2.2.20.23.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.12
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.47.0

Kiali

1.48.11

2.2.20.24. New features Red Hat OpenShift Service Mesh version 2.2.11

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.11 and later versions.

2.2.20.24.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.11
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.47.0

Kiali

1.48.10

2.2.20.25. New features Red Hat OpenShift Service Mesh version 2.2.10

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.25.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.10
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.42.0

Kiali

1.48.8

2.2.20.26. New features Red Hat OpenShift Service Mesh version 2.2.9

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.26.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.9
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.42.0

Kiali

1.48.7

2.2.20.27. New features Red Hat OpenShift Service Mesh version 2.2.8

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.27.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.8
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.42.0

Kiali

1.48.7

2.2.20.28. New features Red Hat OpenShift Service Mesh version 2.2.7

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.10 and later versions.

2.2.20.28.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.7
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.42.0

Kiali

1.48.6

2.2.20.29. New features Red Hat OpenShift Service Mesh version 2.2.6

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.29.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.6
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.39

Kiali

1.48.5

2.2.20.30. New features Red Hat OpenShift Service Mesh version 2.2.5

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.30.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.5
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.39

Kiali

1.48.3

2.2.20.31. New features Red Hat OpenShift Service Mesh version 2.2.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.31.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.4
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.36.14

Kiali

1.48.3

2.2.20.32. New features Red Hat OpenShift Service Mesh version 2.2.3

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.32.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.3
ComponentVersion

Istio

1.12.9

Envoy Proxy

1.20.8

Jaeger

1.36

Kiali

1.48.3

2.2.20.33. New features Red Hat OpenShift Service Mesh version 2.2.2

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.33.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.2
ComponentVersion

Istio

1.12.7

Envoy Proxy

1.20.6

Jaeger

1.36

Kiali

1.48.2-1

2.2.20.33.2. Copy route labels

With this enhancement, in addition to copying annotations, you can copy specific labels for an OpenShift route. Red Hat OpenShift Service Mesh copies all labels and annotations present in the Istio Gateway resource (with the exception of annotations starting with kubectl.kubernetes.io) into the managed OpenShift Route resource.

2.2.20.34. New features Red Hat OpenShift Service Mesh version 2.2.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.34.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2.1
ComponentVersion

Istio

1.12.7

Envoy Proxy

1.20.6

Jaeger

1.34.1

Kiali

1.48.2-1

2.2.20.35. New features Red Hat OpenShift Service Mesh 2.2

This release of Red Hat OpenShift Service Mesh adds new features and enhancements, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.35.1. Component versions included in Red Hat OpenShift Service Mesh version 2.2
ComponentVersion

Istio

1.12.7

Envoy Proxy

1.20.4

Jaeger

1.34.1

Kiali

1.48.0.16

2.2.20.35.2. WasmPlugin API

This release adds support for the WasmPlugin API and deprecates the ServiceMeshExtension API.

2.2.20.35.3. ROSA support

This release introduces service mesh support for Red Hat OpenShift on AWS (ROSA), including multi-cluster federation.

2.2.20.35.4. istio-node DaemonSet renamed

This release, the istio-node DaemonSet is renamed to istio-cni-node to match the name in upstream Istio.

2.2.20.35.5. Envoy sidecar networking changes

Istio 1.10 updated Envoy to send traffic to the application container using eth0 rather than lo by default.

2.2.20.35.6. Service Mesh Control Plane 1.1

This release marks the end of support for Service Mesh Control Planes based on Service Mesh 1.1 for all platforms.

2.2.20.35.7. Istio 1.12 Support

Service Mesh 2.2 is based on Istio 1.12, which brings in new features and product enhancements. While many Istio 1.12 features are supported, the following unsupported features should be noted:

  • AuthPolicy Dry Run is a tech preview feature.
  • gRPC Proxyless Service Mesh is a tech preview feature.
  • Telemetry API is a tech preview feature.
  • Discovery selectors is not a supported feature.
  • External control plane is not a supported feature.
  • Gateway injection is not a supported feature.
2.2.20.35.8. Kubernetes Gateway API
Important

Kubernetes Gateway API is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Kubernetes Gateway API is a technology preview feature that is disabled by default. If the Kubernetes API deployment controller is disabled, you must manually deploy and link an ingress gateway to the created Gateway object.

If the Kubernetes API deployment controller is enabled, then an ingress gateway automatically deploys when a Gateway object is created.

2.2.20.35.8.1. Installing the Gateway API CRDs

The Gateway API CRDs do not come preinstalled by default on OpenShift clusters. Install the CRDs prior to enabling Gateway API support in the SMCP.

$ kubectl get crd gateways.gateway.networking.k8s.io || { kubectl kustomize "github.com/kubernetes-sigs/gateway-api/config/crd?ref=v0.4.0" | kubectl apply -f -; }
2.2.20.35.8.2. Enabling Kubernetes Gateway API

To enable the feature, set the following environment variables for the Istiod container in ServiceMeshControlPlane:

spec:
  runtime:
    components:
      pilot:
        container:
          env:
            PILOT_ENABLE_GATEWAY_API: "true"
            PILOT_ENABLE_GATEWAY_API_STATUS: "true"
            # and optionally, for the deployment controller
            PILOT_ENABLE_GATEWAY_API_DEPLOYMENT_CONTROLLER: "true"

Restricting route attachment on Gateway API listeners is possible using the SameNamespace or All settings. Istio ignores usage of label selectors in listeners.allowedRoutes.namespaces and reverts to the default behavior (SameNamespace).

2.2.20.35.8.3. Manually linking an existing gateway to a Gateway resource

If the Kubernetes API deployment controller is disabled, you must manually deploy and then link an ingress gateway to the created Gateway resource.

  apiVersion: gateway.networking.k8s.io/v1alpha2
  kind: Gateway
  metadata:
    name: gateway
  spec:
    addresses:
    - value: ingress.istio-gateways.svc.cluster.local
      type: Hostname

2.2.20.36. New features Red Hat OpenShift Service Mesh 2.1.6

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.36.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.6
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.5

Jaeger

1.36

Kiali

1.36.16

2.2.20.37. New features Red Hat OpenShift Service Mesh 2.1.5.2

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), contains bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.37.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.5.2
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.5

Jaeger

1.36

Kiali

1.24.17

2.2.20.38. New features Red Hat OpenShift Service Mesh 2.1.5.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.38.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.5.1
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.5

Jaeger

1.36

Kiali

1.36.13

2.2.20.39. New features Red Hat OpenShift Service Mesh 2.1.5

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 and later versions.

2.2.20.39.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.5
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.36

Kiali

1.36.12-1

2.2.20.40. New features Red Hat OpenShift Service Mesh 2.1.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.40.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.4
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.30.2

Kiali

1.36.12-1

2.2.20.41. New features Red Hat OpenShift Service Mesh 2.1.3

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.41.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.3
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.30.2

Kiali

1.36.10-2

2.2.20.42. New features Red Hat OpenShift Service Mesh 2.1.2.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.42.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.2.1
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.30.2

Kiali

1.36.9

2.2.20.43. New features Red Hat OpenShift Service Mesh 2.1.2

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

With this release, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator is now installed to the openshift-distributed-tracing namespace by default. Previously the default installation had been in the openshift-operator namespace.

2.2.20.43.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.2
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.30.1

Kiali

1.36.8

2.2.20.44. New features Red Hat OpenShift Service Mesh 2.1.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

This release also adds the ability to disable the automatic creation of network policies.

2.2.20.44.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1.1
ComponentVersion

Istio

1.9.9

Envoy Proxy

1.17.1

Jaeger

1.24.1

Kiali

1.36.7

2.2.20.44.2. Disabling network policies

Red Hat OpenShift Service Mesh automatically creates and manages a number of NetworkPolicies resources in the Service Mesh control plane and application namespaces. This is to ensure that applications and the control plane can communicate with each other.

If you want to disable the automatic creation and management of NetworkPolicies resources, for example to enforce company security policies, you can do so. You can edit the ServiceMeshControlPlane to set the spec.security.manageNetworkPolicy setting to false

Note

When you disable spec.security.manageNetworkPolicy Red Hat OpenShift Service Mesh will not create any NetworkPolicy objects. The system administrator is responsible for managing the network and fixing any issues this might cause.

Procedure

  1. In the OpenShift Container Platform web console, click Operators Installed Operators.
  2. Select the project where you installed the Service Mesh control plane, for example istio-system, from the Project menu.
  3. Click the Red Hat OpenShift Service Mesh Operator. In the Istio Service Mesh Control Plane column, click the name of your ServiceMeshControlPlane, for example basic-install.
  4. On the Create ServiceMeshControlPlane Details page, click YAML to modify your configuration.
  5. Set the ServiceMeshControlPlane field spec.security.manageNetworkPolicy to false, as shown in this example.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    spec:
      security:
          trust:
          manageNetworkPolicy: false
  6. Click Save.

2.2.20.45. New features and enhancements Red Hat OpenShift Service Mesh 2.1

This release of Red Hat OpenShift Service Mesh adds support for Istio 1.9.8, Envoy Proxy 1.17.1, Jaeger 1.24.1, and Kiali 1.36.5 on OpenShift Container Platform 4.6 EUS, 4.7, 4.8, 4.9, along with new features and enhancements.

2.2.20.45.1. Component versions included in Red Hat OpenShift Service Mesh version 2.1
ComponentVersion

Istio

1.9.6

Envoy Proxy

1.17.1

Jaeger

1.24.1

Kiali

1.36.5

2.2.20.45.2. Service Mesh Federation

New Custom Resource Definitions (CRDs) have been added to support federating service meshes. Service meshes may be federated both within the same cluster or across different OpenShift clusters. These new resources include:

  • ServiceMeshPeer - Defines a federation with a separate service mesh, including gateway configuration, root trust certificate configuration, and status fields. In a pair of federated meshes, each mesh will define its own separate ServiceMeshPeer resource.
  • ExportedServiceMeshSet - Defines which services for a given ServiceMeshPeer are available for the peer mesh to import.
  • ImportedServiceSet - Defines which services for a given ServiceMeshPeer are imported from the peer mesh. These services must also be made available by the peer’s ExportedServiceMeshSet resource.

Service Mesh Federation is not supported between clusters on Red Hat OpenShift Service on AWS (ROSA), Azure Red Hat OpenShift (ARO), or OpenShift Dedicated (OSD).

2.2.20.45.3. OVN-Kubernetes Container Network Interface (CNI) generally available

The OVN-Kubernetes Container Network Interface (CNI) was previously introduced as a Technology Preview feature in Red Hat OpenShift Service Mesh 2.0.1 and is now generally available in Red Hat OpenShift Service Mesh 2.1 and 2.0.x for use on OpenShift Container Platform 4.7.32, OpenShift Container Platform 4.8.12, and OpenShift Container Platform 4.9.

2.2.20.45.4. Service Mesh WebAssembly (WASM) Extensions

The ServiceMeshExtensions Custom Resource Definition (CRD), first introduced in 2.0 as Technology Preview, is now generally available. You can use CRD to build your own plugins, but Red Hat does not provide support for the plugins you create.

Mixer has been completely removed in Service Mesh 2.1. Upgrading from a Service Mesh 2.0.x release to 2.1 will be blocked if Mixer is enabled. Mixer plugins will need to be ported to WebAssembly Extensions.

2.2.20.45.5. 3scale WebAssembly Adapter (WASM)

With Mixer now officially removed, OpenShift Service Mesh 2.1 does not support the 3scale mixer adapter. Before upgrading to Service Mesh 2.1, remove the Mixer-based 3scale adapter and any additional Mixer plugins. Then, manually install and configure the new 3scale WebAssembly adapter with Service Mesh 2.1+ using a ServiceMeshExtension resource.

3scale 2.11 introduces an updated Service Mesh integration based on WebAssembly.

2.2.20.45.6. Istio 1.9 Support

Service Mesh 2.1 is based on Istio 1.9, which brings in a large number of new features and product enhancements. While the majority of Istio 1.9 features are supported, the following exceptions should be noted:

  • Virtual Machine integration is not yet supported
  • Kubernetes Gateway API is not yet supported
  • Remote fetch and load of WebAssembly HTTP filters are not yet supported
  • Custom CA Integration using the Kubernetes CSR API is not yet supported
  • Request Classification for monitoring traffic is a tech preview feature
  • Integration with external authorization systems via Authorization policy’s CUSTOM action is a tech preview feature
2.2.20.45.7. Improved Service Mesh operator performance

The amount of time Red Hat OpenShift Service Mesh uses to prune old resources at the end of every ServiceMeshControlPlane reconciliation has been reduced. This results in faster ServiceMeshControlPlane deployments, and allows changes applied to existing SMCPs to take effect more quickly.

2.2.20.45.8. Kiali updates

Kiali 1.36 includes the following features and enhancements:

  • Service Mesh troubleshooting functionality

    • Control plane and gateway monitoring
    • Proxy sync statuses
    • Envoy configuration views
    • Unified view showing Envoy proxy and application logs interleaved
  • Namespace and cluster boxing to support federated service mesh views
  • New validations, wizards, and distributed tracing enhancements

2.2.20.46. New features Red Hat OpenShift Service Mesh 2.0.11.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 or later.

2.2.20.46.1. Component versions included in Red Hat OpenShift Service Mesh version 2.0.11.1
ComponentVersion

Istio

1.6.14

Envoy Proxy

1.14.5

Jaeger

1.36

Kiali

1.24.17

2.2.20.47. New features Red Hat OpenShift Service Mesh 2.0.11

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs), bug fixes, and is supported on OpenShift Container Platform 4.9 or later.

2.2.20.47.1. Component versions included in Red Hat OpenShift Service Mesh version 2.0.11
ComponentVersion

Istio

1.6.14

Envoy Proxy

1.14.5

Jaeger

1.36

Kiali

1.24.16-1

2.2.20.48. New features Red Hat OpenShift Service Mesh 2.0.10

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.48.1. Component versions included in Red Hat OpenShift Service Mesh version 2.0.10
ComponentVersion

Istio

1.6.14

Envoy Proxy

1.14.5

Jaeger

1.28.0

Kiali

1.24.16-1

2.2.20.49. New features Red Hat OpenShift Service Mesh 2.0.9

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.49.1. Component versions included in Red Hat OpenShift Service Mesh version 2.0.9
ComponentVersion

Istio

1.6.14

Envoy Proxy

1.14.5

Jaeger

1.24.1

Kiali

1.24.11

2.2.20.50. New features Red Hat OpenShift Service Mesh 2.0.8

This release of Red Hat OpenShift Service Mesh addresses bug fixes.

2.2.20.51. New features Red Hat OpenShift Service Mesh 2.0.7.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs).

2.2.20.51.1. Change in how Red Hat OpenShift Service Mesh handles URI fragments

Red Hat OpenShift Service Mesh contains a remotely exploitable vulnerability, CVE-2021-39156, where an HTTP request with a fragment (a section in the end of a URI that begins with a # character) in the URI path could bypass the Istio URI path-based authorization policies. For instance, an Istio authorization policy denies requests sent to the URI path /user/profile. In the vulnerable versions, a request with URI path /user/profile#section1 bypasses the deny policy and routes to the backend (with the normalized URI path /user/profile%23section1), possibly leading to a security incident.

You are impacted by this vulnerability if you use authorization policies with DENY actions and operation.paths, or ALLOW actions and operation.notPaths.

With the mitigation, the fragment part of the request’s URI is removed before the authorization and routing. This prevents a request with a fragment in its URI from bypassing authorization policies which are based on the URI without the fragment part.

To opt-out from the new behavior in the mitigation, the fragment section in the URI will be kept. You can configure your ServiceMeshControlPlane to keep URI fragments.

Warning

Disabling the new behavior will normalize your paths as described above and is considered unsafe. Ensure that you have accommodated for this in any security policies before opting to keep URI fragments.

Example ServiceMeshControlPlane modification

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  techPreview:
    meshConfig:
      defaultConfig:
        proxyMetadata: HTTP_STRIP_FRAGMENT_FROM_PATH_UNSAFE_IF_DISABLED: "false"

2.2.20.51.2. Required update for authorization policies

Istio generates hostnames for both the hostname itself and all matching ports. For instance, a virtual service or Gateway for a host of "httpbin.foo" generates a config matching "httpbin.foo and httpbin.foo:*". However, exact match authorization policies only match the exact string given for the hosts or notHosts fields.

Your cluster is impacted if you have AuthorizationPolicy resources using exact string comparison for the rule to determine hosts or notHosts.

You must update your authorization policy rules to use prefix match instead of exact match. For example, replacing hosts: ["httpbin.com"] with hosts: ["httpbin.com:*"] in the first AuthorizationPolicy example.

First example AuthorizationPolicy using prefix match

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: httpbin
  namespace: foo
spec:
  action: DENY
  rules:
  - from:
    - source:
        namespaces: ["dev"]
    to:
    - operation:
        hosts: [“httpbin.com”,"httpbin.com:*"]

Second example AuthorizationPolicy using prefix match

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: httpbin
  namespace: default
spec:
  action: DENY
  rules:
  - to:
    - operation:
        hosts: ["httpbin.example.com:*"]

2.2.20.52. New features Red Hat OpenShift Service Mesh 2.0.7

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.53. Red Hat OpenShift Service Mesh on Red Hat OpenShift Dedicated and Microsoft Azure Red Hat OpenShift

Red Hat OpenShift Service Mesh is now supported through Red Hat OpenShift Dedicated and Microsoft Azure Red Hat OpenShift.

2.2.20.54. New features Red Hat OpenShift Service Mesh 2.0.6

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.55. New features Red Hat OpenShift Service Mesh 2.0.5

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.56. New features Red Hat OpenShift Service Mesh 2.0.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

Important

There are manual steps that must be completed to address CVE-2021-29492 and CVE-2021-31920.

2.2.20.56.1. Manual updates required by CVE-2021-29492 and CVE-2021-31920

Istio contains a remotely exploitable vulnerability where an HTTP request path with multiple slashes or escaped slash characters (%2F or %5C) could potentially bypass an Istio authorization policy when path-based authorization rules are used.

For example, assume an Istio cluster administrator defines an authorization DENY policy to reject the request at path /admin. A request sent to the URL path //admin will NOT be rejected by the authorization policy.

According to RFC 3986, the path //admin with multiple slashes should technically be treated as a different path from the /admin. However, some backend services choose to normalize the URL paths by merging multiple slashes into a single slash. This can result in a bypass of the authorization policy (//admin does not match /admin), and a user can access the resource at path /admin in the backend; this would represent a security incident.

Your cluster is impacted by this vulnerability if you have authorization policies using ALLOW action + notPaths field or DENY action + paths field patterns. These patterns are vulnerable to unexpected policy bypasses.

Your cluster is NOT impacted by this vulnerability if:

  • You don’t have authorization policies.
  • Your authorization policies don’t define paths or notPaths fields.
  • Your authorization policies use ALLOW action + paths field or DENY action + notPaths field patterns. These patterns could only cause unexpected rejection instead of policy bypasses. The upgrade is optional for these cases.
Note

The Red Hat OpenShift Service Mesh configuration location for path normalization is different from the Istio configuration.

2.2.20.56.2. Updating the path normalization configuration

Istio authorization policies can be based on the URL paths in the HTTP request. Path normalization, also known as URI normalization, modifies and standardizes the incoming requests' paths so that the normalized paths can be processed in a standard way. Syntactically different paths may be equivalent after path normalization.

Istio supports the following normalization schemes on the request paths before evaluating against the authorization policies and routing the requests:

Table 2.1. Normalization schemes
OptionDescriptionExampleNotes

NONE

No normalization is done. Anything received by Envoy will be forwarded exactly as-is to any backend service.

../%2Fa../b is evaluated by the authorization policies and sent to your service.

This setting is vulnerable to CVE-2021-31920.

BASE

This is currently the option used in the default installation of Istio. This applies the normalize_path option on Envoy proxies, which follows RFC 3986 with extra normalization to convert backslashes to forward slashes.

/a/../b is normalized to /b. \da is normalized to /da.

This setting is vulnerable to CVE-2021-31920.

MERGE_SLASHES

Slashes are merged after the BASE normalization.

/a//b is normalized to /a/b.

Update to this setting to mitigate CVE-2021-31920.

DECODE_AND_MERGE_SLASHES

The strictest setting when you allow all traffic by default. This setting is recommended, with the caveat that you must thoroughly test your authorization policies routes. Percent-encoded slash and backslash characters (%2F, %2f, %5C and %5c) are decoded to / or \, before the MERGE_SLASHES normalization.

/a%2fb is normalized to /a/b.

Update to this setting to mitigate CVE-2021-31920. This setting is more secure, but also has the potential to break applications. Test your applications before deploying to production.

The normalization algorithms are conducted in the following order:

  1. Percent-decode %2F, %2f, %5C and %5c.
  2. The RFC 3986 and other normalization implemented by the normalize_path option in Envoy.
  3. Merge slashes.
Warning

While these normalization options represent recommendations from HTTP standards and common industry practices, applications may interpret a URL in any way it chooses to. When using denial policies, ensure that you understand how your application behaves.

2.2.20.56.3. Path normalization configuration examples

Ensuring Envoy normalizes request paths to match your backend services' expectations is critical to the security of your system. The following examples can be used as a reference for you to configure your system. The normalized URL paths, or the original URL paths if NONE is selected, will be:

  1. Used to check against the authorization policies.
  2. Forwarded to the backend application.
Table 2.2. Configuration examples
If your application…​Choose…​

Relies on the proxy to do normalization

BASE, MERGE_SLASHES or DECODE_AND_MERGE_SLASHES

Normalizes request paths based on RFC 3986 and does not merge slashes.

BASE

Normalizes request paths based on RFC 3986 and merges slashes, but does not decode percent-encoded slashes.

MERGE_SLASHES

Normalizes request paths based on RFC 3986, decodes percent-encoded slashes, and merges slashes.

DECODE_AND_MERGE_SLASHES

Processes request paths in a way that is incompatible with RFC 3986.

NONE

2.2.20.56.4. Configuring your SMCP for path normalization

To configure path normalization for Red Hat OpenShift Service Mesh, specify the following in your ServiceMeshControlPlane. Use the configuration examples to help determine the settings for your system.

SMCP v2 pathNormalization

spec:
  techPreview:
    global:
      pathNormalization: <option>

2.2.20.56.5. Configuring for case normalization

In some environments, it may be useful to have paths in authorization policies compared in a case insensitive manner. For example, treating https://myurl/get and https://myurl/GeT as equivalent. In those cases, you can use the EnvoyFilter shown below. This filter will change both the path used for comparison and the path presented to the application. In this example, istio-system is the name of the Service Mesh control plane project.

Save the EnvoyFilter to a file and run the following command:

$ oc create -f <myEnvoyFilterFile>
apiVersion: networking.istio.io/v1alpha3
kind: EnvoyFilter
metadata:
  name: ingress-case-insensitive
  namespace: istio-system
spec:
  configPatches:
  - applyTo: HTTP_FILTER
    match:
      context: GATEWAY
      listener:
        filterChain:
          filter:
            name: "envoy.filters.network.http_connection_manager"
            subFilter:
              name: "envoy.filters.http.router"
    patch:
      operation: INSERT_BEFORE
      value:
        name: envoy.lua
        typed_config:
            "@type": "type.googleapis.com/envoy.extensions.filters.http.lua.v3.Lua"
            inlineCode: |
              function envoy_on_request(request_handle)
                local path = request_handle:headers():get(":path")
                request_handle:headers():replace(":path", string.lower(path))
              end

2.2.20.57. New features Red Hat OpenShift Service Mesh 2.0.3

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

In addition, this release has the following new features:

  • Added an option to the must-gather data collection tool that gathers information from a specified Service Mesh control plane namespace. For more information, see OSSM-351.
  • Improved performance for Service Mesh control planes with hundreds of namespaces

2.2.20.58. New features Red Hat OpenShift Service Mesh 2.0.2

This release of Red Hat OpenShift Service Mesh adds support for IBM Z® and IBM Power® Systems. It also addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.59. New features Red Hat OpenShift Service Mesh 2.0.1

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

2.2.20.60. New features Red Hat OpenShift Service Mesh 2.0

This release of Red Hat OpenShift Service Mesh adds support for Istio 1.6.5, Jaeger 1.20.0, Kiali 1.24.2, and the 3scale Istio Adapter 2.0 and OpenShift Container Platform 4.6.

In addition, this release has the following new features:

  • Simplifies installation, upgrades, and management of the Service Mesh control plane.
  • Reduces the Service Mesh control plane’s resource usage and startup time.
  • Improves performance by reducing inter-control plane communication over networking.

    • Adds support for Envoy’s Secret Discovery Service (SDS). SDS is a more secure and efficient mechanism for delivering secrets to Envoy side car proxies.
  • Removes the need to use Kubernetes Secrets, which have well known security risks.
  • Improves performance during certificate rotation, as proxies no longer require a restart to recognize new certificates.

    • Adds support for Istio’s Telemetry v2 architecture, which is built using WebAssembly extensions. This new architecture brings significant performance improvements.
    • Updates the ServiceMeshControlPlane resource to v2 with a streamlined configuration to make it easier to manage the Service Mesh Control Plane.
    • Introduces WebAssembly extensions as a Technology Preview feature.

2.2.21. Technology Preview

Some features in this release are currently in Technology Preview. These experimental features are not intended for production use.

Important

Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

2.2.22. Deprecated and removed features

Some features available in previous releases have been deprecated or removed.

Deprecated functionality is still included in OpenShift Container Platform and continues to be supported; however, it will be removed in a future release of this product and is not recommended for new deployments.

Removed functionality no longer exists in the product.

2.2.22.1. Deprecated and removed features in Red Hat OpenShift Service Mesh 2.5

The v2.2 ServiceMeshControlPlane resource is no longer supported. Customers should update their mesh deployments to use a later version of the ServiceMeshControlPlane resource.

Support for the Red Hat OpenShift distributed tracing platform (Jaeger) Operator is deprecated. To collect trace spans, use the Red Hat OpenShift distributed tracing platform (Tempo) Stack.

Support for the OpenShift Elasticsearch Operator is deprecated.

Istio will remove support for first-party JSON Web Tokens (JWTs). Istio will still support third-Party JWTs.

2.2.22.2. Deprecated and removed features in Red Hat OpenShift Service Mesh 2.4

The v2.1 ServiceMeshControlPlane resource is no longer supported. Customers should upgrade their mesh deployments to use a later version of the ServiceMeshControlPlane resource.

Support for Istio OpenShift Routing (IOR) is deprecated and will be removed in a future release.

Support for Grafana is deprecated and will be removed in a future release.

Support for the following cipher suites, which were deprecated in Red Hat OpenShift Service Mesh 2.3, has been removed from the default list of ciphers used in TLS negotiations on both the client and server sides. Applications that require access to services requiring one of these cipher suites will fail to connect when a TLS connection is initiated from the proxy.

  • ECDHE-ECDSA-AES128-SHA
  • ECDHE-RSA-AES128-SHA
  • AES128-GCM-SHA256
  • AES128-SHA
  • ECDHE-ECDSA-AES256-SHA
  • ECDHE-RSA-AES256-SHA
  • AES256-GCM-SHA384
  • AES256-SHA

2.2.22.3. Deprecated and removed features in Red Hat OpenShift Service Mesh 2.3

Support for the following cipher suites has been deprecated. In a future release, they will be removed from the default list of ciphers used in TLS negotiations on both the client and server sides.

  • ECDHE-ECDSA-AES128-SHA
  • ECDHE-RSA-AES128-SHA
  • AES128-GCM-SHA256
  • AES128-SHA
  • ECDHE-ECDSA-AES256-SHA
  • ECDHE-RSA-AES256-SHA
  • AES256-GCM-SHA384
  • AES256-SHA

The ServiceMeshExtension API, which was deprecated in Red Hat OpenShift Service Mesh version 2.2, was removed in Red Hat OpenShift Service Mesh version 2.3. If you are using the ServiceMeshExtension API, you must migrate to the WasmPlugin API to continue using your WebAssembly extensions.

2.2.22.4. Deprecated features in Red Hat OpenShift Service Mesh 2.2

The ServiceMeshExtension API is deprecated as of release 2.2 and will be removed in a future release. While ServiceMeshExtension API is still supported in release 2.2, customers should start moving to the new WasmPlugin API.

2.2.22.5. Removed features in Red Hat OpenShift Service Mesh 2.2

This release marks the end of support for Service Mesh control planes based on Service Mesh 1.1 for all platforms.

2.2.22.6. Removed features in Red Hat OpenShift Service Mesh 2.1

In Service Mesh 2.1, the Mixer component is removed. Bug fixes and support is provided through the end of the Service Mesh 2.0 life cycle.

Upgrading from a Service Mesh 2.0.x release to 2.1 will not proceed if Mixer plugins are enabled. Mixer plugins must be ported to WebAssembly Extensions.

2.2.22.7. Deprecated features in Red Hat OpenShift Service Mesh 2.0

The Mixer component was deprecated in release 2.0 and will be removed in release 2.1. While using Mixer for implementing extensions was still supported in release 2.0, extensions should have been migrated to the new WebAssembly mechanism.

The following resource types are no longer supported in Red Hat OpenShift Service Mesh 2.0:

  • Policy (authentication.istio.io/v1alpha1) is no longer supported. Depending on the specific configuration in your Policy resource, you may have to configure multiple resources to achieve the same effect.

    • Use RequestAuthentication (security.istio.io/v1beta1)
    • Use PeerAuthentication (security.istio.io/v1beta1)
  • ServiceMeshPolicy (maistra.io/v1) is no longer supported.

    • Use RequestAuthentication or PeerAuthentication, as mentioned above, but place in the Service Mesh control plane namespace.
  • RbacConfig (rbac.istio.io/v1alpha1) is no longer supported.

    • Replaced by AuthorizationPolicy (security.istio.io/v1beta1), which encompasses behavior of RbacConfig, ServiceRole, and ServiceRoleBinding.
  • ServiceMeshRbacConfig (maistra.io/v1) is no longer supported.

    • Use AuthorizationPolicy as above, but place in Service Mesh control plane namespace.
  • ServiceRole (rbac.istio.io/v1alpha1) is no longer supported.
  • ServiceRoleBinding (rbac.istio.io/v1alpha1) is no longer supported.
  • In Kiali, the login and LDAP strategies are deprecated. A future version will introduce authentication using OpenID providers.

2.2.23. Known issues

These limitations exist in Red Hat OpenShift Service Mesh:

  • Red Hat OpenShift Service Mesh does not yet fully support IPv6. As a result, Red Hat OpenShift Service Mesh does not support dual-stack clusters.
  • Graph layout - The layout for the Kiali graph can render differently, depending on your application architecture and the data to display (number of graph nodes and their interactions). Because it is difficult if not impossible to create a single layout that renders nicely for every situation, Kiali offers a choice of several different layouts. To choose a different layout, you can choose a different Layout Schema from the Graph Settings menu.
  • The first time you access related services such as distributed tracing platform (Jaeger) and Grafana, from the Kiali console, you must accept the certificate and re-authenticate using your OpenShift Container Platform login credentials. This happens due to an issue with how the framework displays embedded pages in the console.
  • The Bookinfo sample application cannot be installed on IBM Power®, IBM Z®, and IBM® LinuxONE.
  • WebAssembly extensions are not supported on IBM Power®, IBM Z®, and IBM® LinuxONE.
  • LuaJIT is not supported on IBM Power®, IBM Z®, and IBM® LinuxONE.
  • Single stack IPv6 support is not available on IBM Power®, IBM Z®, and IBM® LinuxONE.

2.2.23.1. Service Mesh known issues

These are the known issues in Red Hat OpenShift Service Mesh: * OSSM-5556 Gateways are skipped when istio-system labels do not match discovery selectors.

+ Workaround: Label the control plane namespace to match discovery selectors to avoid skipping the Gateway configurations.

+ .Example ServiceMeshControlPlane resource

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
  namespace: istio-system
spec:
  mode: ClusterWide
  meshConfig:
    discoverySelectors:
    - matchLabels:
        istio-discovery: enabled
  gateways:
    ingress:
      enabled: true

+ Then, run the following command at the command line:

+

oc label namespace istio-system istio-discovery=enabled
  • OSSM-3890 Attempting to use the Gateway API in a multitenant mesh deployment generates an error message similar to the following:

    2023-05-02T15:20:42.541034Z	error	watch error in cluster Kubernetes: failed to list *v1alpha2.TLSRoute: the server could not find the requested resource (get tlsroutes.gateway.networking.k8s.io)
    2023-05-02T15:20:42.616450Z	info	kube	controller "gateway.networking.k8s.io/v1alpha2/TCPRoute" is syncing...

    To support Gateway API in a multitenant mesh deployment, all Gateway API Custom Resource Definition (CRD) files must be present in the cluster.

    In a multitenant mesh deployment, CRD scan is disabled, and Istio has no way to discover which CRDs are present in a cluster. As a result, Istio attempts to watch all supported Gateway API CRDs, but generates errors if some of those CRDs are not present.

    Service Mesh 2.3.1 and later versions support both v1alpha2 and v1beta1 CRDs. Therefore, both CRD versions must be present for a multitenant mesh deployment to support the Gateway API.

    Workaround: In the following example, the kubectl get operation installs the v1alpha2 and v1beta1 CRDs. Note the URL contains the additional experimental segment and updates any of your existing scripts accordingly:

    $ kubectl get crd gateways.gateway.networking.k8s.io ||   { kubectl kustomize "github.com/kubernetes-sigs/gateway-api/config/crd/experimental?ref=v0.5.1" | kubectl apply -f -; }
  • OSSM-2042 Deployment of SMCP named default fails. If you are creating an SMCP object, and set its version field to v2.3, the name of the object cannot be default. If the name is default, then the control plane fails to deploy, and OpenShift generates a Warning event with the following message:

    Error processing component mesh-config: error: [mesh-config/templates/telemetryv2_1.6.yaml: Internal error occurred: failed calling webhook "rev.validation.istio.io": Post "https://istiod-default.istio-system.svc:443/validate?timeout=10s": x509: certificate is valid for istiod.istio-system.svc, istiod-remote.istio-system.svc, istio-pilot.istio-system.svc, not istiod-default.istio-system.svc, mesh-config/templates/enable-mesh-permissive.yaml

  • OSSM-1655 Kiali dashboard shows error after enabling mTLS in SMCP.

    After enabling the spec.security.controlPlane.mtls setting in the SMCP, the Kiali console displays the following error message No subsets defined.

  • OSSM-1505 This issue only occurs when using the ServiceMeshExtension resource on OpenShift Container Platform 4.11. When you use ServiceMeshExtension on OpenShift Container Platform 4.11 the resource never becomes ready. If you inspect the issue using oc describe ServiceMeshExtension you will see the following error: stderr: Error creating mount namespace before pivot: function not implemented.

    Workaround: ServiceMeshExtension was deprecated in Service Mesh 2.2. Migrate from ServiceMeshExtension to the WasmPlugin resource. For more information, see Migrating from ServiceMeshExtension to WasmPlugin resources.

  • OSSM-1396 If a gateway resource contains the spec.externalIPs setting, instead of being recreated when the ServiceMeshControlPlane is updated, the gateway is removed and never recreated.
  • OSSM-1168 When service mesh resources are created as a single YAML file, the Envoy proxy sidecar is not reliably injected into pods. When the SMCP, SMMR, and Deployment resources are created individually, the deployment works as expected.
  • OSSM-1115 The concurrency field of the spec.proxy API did not propagate to the istio-proxy. The concurrency field works when set with ProxyConfig. The concurrency field specifies the number of worker threads to run. If the field is set to 0, then the number of worker threads available is equal to the number of CPU cores. If the field is not set, then the number of worker threads available defaults to 2.

    In the following example, the concurrency field is set to 0.

    apiVersion: networking.istio.io/v1beta1
    kind: ProxyConfig
    metadata:
      name: mesh-wide-concurrency
      namespace: <istiod-namespace>
    spec:
      concurrency: 0
  • OSSM-1052 When configuring a Service ExternalIP for the ingressgateway in the Service Mesh control plane, the service is not created. The schema for the SMCP is missing the parameter for the service.

    Workaround: Disable the gateway creation in the SMCP spec and manage the gateway deployment entirely manually (including Service, Role and RoleBinding).

  • OSSM-882 This applies for Service Mesh 2.1 and earlier. Namespace is in the accessible_namespace list but does not appear in Kiali UI. By default, Kiali will not show any namespaces that start with "kube" because these namespaces are typically internal-use only and not part of a mesh.

    For example, if you create a namespace called 'akube-a' and add it to the Service Mesh member roll, then the Kiali UI does not display the namespace. For defined exclusion patterns, the software excludes namespaces that start with or contain the pattern.

    Workaround: Change the Kiali Custom Resource setting so it prefixes the setting with a carat (^). For example:

    api:
      namespaces:
        exclude:
        - "^istio-operator"
        - "^kube-.*"
        - "^openshift.*"
        - "^ibm.*"
        - "^kiali-operator"
  • MAISTRA-2692 With Mixer removed, custom metrics that have been defined in Service Mesh 2.0.x cannot be used in 2.1. Custom metrics can be configured using EnvoyFilter. Red Hat is unable to support EnvoyFilter configuration except where explicitly documented. This is due to tight coupling with the underlying Envoy APIs, meaning that backward compatibility cannot be maintained.
  • MAISTRA-2648 Service mesh extensions are currently not compatible with meshes deployed on IBM Z®.
  • MAISTRA-1959 Migration to 2.0 Prometheus scraping (spec.addons.prometheus.scrape set to true) does not work when mTLS is enabled. Additionally, Kiali displays extraneous graph data when mTLS is disabled.

    This problem can be addressed by excluding port 15020 from proxy configuration, for example,

    spec:
      proxy:
        networking:
          trafficControl:
            inbound:
              excludedPorts:
              - 15020
  • MAISTRA-453 If you create a new project and deploy pods immediately, sidecar injection does not occur. The operator fails to add the maistra.io/member-of before the pods are created, therefore the pods must be deleted and recreated for sidecar injection to occur.
  • MAISTRA-158 Applying multiple gateways referencing the same hostname will cause all gateways to stop functioning.

2.2.23.2. Kiali known issues

Note

New issues for Kiali should be created in the OpenShift Service Mesh project with the Component set to Kiali.

These are the known issues in Kiali:

  • OSSM-6299 In OpenShift Container Platform 4.15, when you click the Node graph menu option of any node menu within the traffic graph, the node graph is not displayed. Instead, the page is refreshed with the same traffic graph. Currently, no workaround exists for this issue.
  • OSSM-6298 When you click an item reference within the OpenShift Service Mesh Console (OSSMC) plugin, such as a workload link related to a specific service, the console sometimes performs multiple redirections before opening the desired page. If you click Back in a web browser, a different page of the console opens instead of the previous page. As a workaround, click Back twice to navigate to the previous page.
  • OSSM-6290 For OpenShift Container Platform 4.15, the Project filter of the Istio Config list page does not work correctly. All istio items are displayed even if you select a specific project from the dropdown. Currently, no workaround exists for this issue.
  • KIALI-2206 When you are accessing the Kiali console for the first time, and there is no cached browser data for Kiali, the “View in Grafana” link on the Metrics tab of the Kiali Service Details page redirects to the wrong location. The only way you would encounter this issue is if you are accessing Kiali for the first time.
  • KIALI-507 Kiali does not support Internet Explorer 11. This is because the underlying frameworks do not support Internet Explorer. To access the Kiali console, use one of the two most recent versions of the Chrome, Edge, Firefox or Safari browser.

2.2.24. Fixed issues

The following issues have been resolved in previous releases:

2.2.24.1. Service Mesh fixed issues

  • OSSM-6177 Previously, when validation messages were enabled in the ServiceMeshControlPlane (SMCP), the istiod crashed continuously unless GatewayAPI support was enabled. Now, when validation messages are enabled but GatewayAPI support is not, the istiod does not continuously crash.
  • OSSM-6163 Resolves the following issues:

    • Previously, an unstable Prometheus image was included in the Service Mesh control plane (SMCP) v2.5, and users were not able to access the Prometheus dashboard. Now, in the Service Mesh operator 2.5.1, the Prometheus image has been updated.
    • Previously, in the Service Mesh control plane (SMCP), a Grafana data source was not able to set Basic authentication password automatically and users were not able to view metrics from Prometheus in Grafana mesh dashboards. Now, a Grafana data source password is configured under the secureJsonData field. Metrics are displayed correctly in dashboards.
  • OSSM-6148 Previously, the OpenShift Service Mesh Console (OSSMC) plugin did not respond when the user clicked any option in the menu of any node on the Traffic Graph page. Now, the plugin responds to the selected option in the menu by redirecting to the corresponding details page.
  • OSSM-6099 Previously, the OpenShift Service Mesh Console (OSSMC) plugin failed to load correctly in an IPv6 cluster. Now, the OSSMC plugin configuration has been modified to ensure proper loading in an IPv6 cluster.
  • OSSM-5960 Previously, the OpenShift Service Mesh Console (OSSMC) plugin did not display notification messages such as backend errors or Istio validations. Now, these notifications are displayed correctly at the top of the plugin page.
  • OSSM-5959 Previously, the OpenShift Service Mesh Console (OSSMC) plugin did not display TLS and Istio certification information in the Overview page. Now, this information is displayed correctly.
  • OSSM-5902 Previously, the OpenShift Service Mesh Console (OSSMC) plugin redirected to a "Not Found Page" error when the user clicked the Istio config health symbol on the Overview page. Now, the plugin redirects to the correct Istio config details page.
  • OSSM-5541 Previously, an Istio operator pod might keep waiting for the leader lease in some restart conditions. Now, the leader election implementation has been enhanced to avoid this issue.
  • OSSM-1397 Previously, if you removed the maistra.io/member-of label from a namespace, the Service Mesh Operator did not automatically reapply the label to the namespace. As a result, sidecar injection did not work in the namespace.

    The Operator would reapply the label to the namespace when you made changes to the ServiceMeshMember object, which triggered the reconciliation of this member object.

    Now, any change to the namespace also triggers the member object reconciliation.

  • OSSM-3647 Previously, in the Service Mesh control plane (SMCP) v2.2 (Istio 1.12), WasmPlugins were applied only to inbound listeners. Since SMCP v2.3 (Istio 1.14), WasmPlugins have been applied to inbound and outbound listeners by default, which introduced regression for users of the 3scale WasmPlugin. Now, the environment variable APPLY_WASM_PLUGINS_TO_INBOUND_ONLY is added, which allows safe migration from SMCP v2.2 to v2.3 and v2.4.

    The following setting should be added to the SMCP config:

    spec:
      runtime:
        components:
          pilot:
            container:
              env:
                APPLY_WASM_PLUGINS_TO_INBOUND_ONLY: "true"

    To ensure safe migration, perform the following steps:

    1. Set APPLY_WASM_PLUGINS_TO_INBOUND_ONLY in SMCP v2.2.
    2. Upgrade to 2.4.
    3. Set spec.match[].mode: SERVER in WasmPlugins.
    4. Remove the previously-added environment variable.
  • OSSM-4851 Previously, an error occurred in the operator deploying new pods in a namespace scoped inside the mesh when runAsGroup, runAsUser, or fsGroup parameters were nil. Now, a yaml validation has been added to avoid the nil value.
  • OSSM-3771 Previously, OpenShift routes could not be disabled for additional ingress gateways defined in a Service Mesh Control Plane (SMCP). Now, a routeConfig block can be added to each additionalIngress gateway so the creation of OpenShift routes can be enabled or disabled for each gateway.
  • OSSM-4197 Previously, if you deployed a v2.2 or v2.1 of the 'ServiceMeshControlPlane' resource, the /etc/cni/multus/net.d/ directory was not created. As a result, the istio-cni pod failed to become ready, and the istio-cni pods log contained the following message:

    $ error   Installer exits with open /host/etc/cni/multus/net.d/v2-2-istio-cni.kubeconfig.tmp.841118073: no such file or directory

    Now, if you deploy a v2.2 or v2.1 of the 'ServiceMeshControlPlane' resource, the /etc/cni/multus/net.d/ directory is created, and the istio-cni pod becomes ready.

  • OSSM-3993 Previously, Kiali only supported OpenShift OAuth via a proxy on the standard HTTPS port of 443. Now, Kiali supports OpenShift OAuth over a non-standard HTTPS port. To enable the port, you must set the spec.server.web_port field to the proxy’s non-standard HTTPS port in the Kiali CR.
  • OSSM-3936 Previously, the values for the injection_label_rev and injection_label_name attributes were hardcoded. This prevented custom configurations from taking effect in the Kiali Custom Resource Definition (CRD). Now, the attribute values are not hardcoded. You can customize the values for the injection_label_rev and injection_label_name attributes in the spec.istio_labels specification.
  • OSSM-3644 Previously, the federation egress-gateway received the wrong update of network gateway endpoints, causing extra endpoint entries. Now, the federation-egress gateway has been updated on the server side so it receives the correct network gateway endpoints.
  • OSSM-3595 Previously, the istio-cni plugin sometimes failed on RHEL because SELinux did not allow the utility iptables-restore to open files in the /tmp directory. Now, SELinux passes iptables-restore via stdin input stream instead of via a file.
  • OSSM-3586 Previously, Istio proxies were slow to start when Google Cloud Platform (GCP) metadata servers were not available. When you upgrade to Istio 1.14.6, Istio proxies start as expected on GCP, even if metadata servers are not available.
  • OSSM-3025 Istiod sometimes fails to become ready. Sometimes, when a mesh contained many member namespaces, the Istiod pod did not become ready due to a deadlock within Istiod. The deadlock is now resolved and the pod now starts as expected.
  • OSSM-2493 Default nodeSelector and tolerations in SMCP not passed to Kiali. The nodeSelector and tolerations you add to SMCP.spec.runtime.defaults are now passed to the Kiali resource.
  • OSSM-2492 Default tolerations in SMCP not passed to Jaeger. The nodeSelector and tolerations you add to SMCP.spec.runtime.defaults are now passed to the Jaeger resource.
  • OSSM-2374 If you deleted one of the ServiceMeshMember resources, then the Service Mesh operator deleted the ServiceMeshMemberRoll. While this is expected behavior when you delete the last ServiceMeshMember, the operator should not delete the ServiceMeshMemberRoll if it contains any members in addition to the one that was deleted. This issue is now fixed and the operator only deletes the ServiceMeshMemberRoll when the last ServiceMeshMember resource is deleted.
  • OSSM-2373 Error trying to get OAuth metadata when logging in. To fetch the cluster version, the system:anonymous account is used. With the cluster’s default bundled ClusterRoles and ClusterRoleBinding, the anonymous account can fetch the version correctly. If the system:anonymous account loses its privileges to fetch the cluster version, OpenShift authentication becomes unusable.

    This is fixed by using the Kiali SA to fetch the cluster version. This also allows for improved security on the cluster.

  • OSSM-2371 Despite Kiali being configured as "view-only," a user can change the proxy logging level via the Workload details' Logs tab’s kebab menu. This issue has been fixed so the options under "Set Proxy Log Level" are disabled when Kiali is configured as "view-only."
  • OSSM-2344 Restarting Istiod causes Kiali to flood CRI-O with port-forward requests. This issue occurred when Kiali could not connect to Istiod and Kiali simultaneously issued a large number of requests to istiod. Kiali now limits the number of requests it sends to istiod.
  • OSSM-2335 Dragging the mouse pointer over the Traces scatterchart plot sometimes caused the Kiali console to stop responding due to concurrent backend requests.
  • OSSM-2221 Previously, gateway injection in the ServiceMeshControlPlane namespace was not possible because the ignore-namespace label was applied to the namespace by default.

    When creating a v2.4 control plane, the namespace no longer has the ignore-namespace label applied, and gateway injection is possible.

    In the following example, the oc label command removes the ignore-namespace label from a namespace in an existing deployment:

    $ oc label namespace istio-system maistra.io/ignore-namespace-

    where:

    istio_system
    Specified the name of the ServiceMeshControlPlane namespace.
  • OSSM-2053 Using Red Hat OpenShift Service Mesh Operator 2.2 or 2.3, during SMCP reconciliation, the SMMR controller removed the member namespaces from SMMR.status.configuredMembers. This caused the services in the member namespaces to become unavailable for a few moments.

    Using Red Hat OpenShift Service Mesh Operator 2.2 or 2.3, the SMMR controller no longer removes the namespaces from SMMR.status.configuredMembers. Instead, the controller adds the namespaces to SMMR.status.pendingMembers to indicate that they are not up-to-date. During reconciliation, as each namespace synchronizes with the SMCP, the namespace is automatically removed from SMMR.status.pendingMembers.

  • OSSM-1962 Use EndpointSlices in federation controller. The federation controller now uses EndpointSlices, which improves scalability and performance in large deployments. The PILOT_USE_ENDPOINT_SLICE flag is enabled by default. Disabling the flag prevents use of federation deployments.
  • OSSM-1668 A new field spec.security.jwksResolverCA was added to the Version 2.1 SMCP but was missing in the 2.2.0 and 2.2.1 releases. When upgrading from an Operator version where this field was present to an Operator version that was missing this field, the .spec.security.jwksResolverCA field was not available in the SMCP.
  • OSSM-1325 istiod pod crashes and displays the following error message: fatal error: concurrent map iteration and map write.
  • OSSM-1211 Configuring Federated service meshes for failover does not work as expected.

    The Istiod pilot log displays the following error: envoy connection [C289] TLS error: 337047686:SSL routines:tls_process_server_certificate:certificate verify failed

  • OSSM-1099 The Kiali console displayed the message Sorry, there was a problem. Try a refresh or navigate to a different page.
  • OSSM-1074 Pod annotations defined in SMCP are not injected in the pods.
  • OSSM-999 Kiali retention did not work as expected. Calendar times were greyed out in the dashboard graph.
  • OSSM-797 Kiali Operator pod generates CreateContainerConfigError while installing or updating the operator.
  • OSSM-722 Namespace starting with kube is hidden from Kiali.
  • OSSM-569 There is no CPU memory limit for the Prometheus istio-proxy container. The Prometheus istio-proxy sidecar now uses the resource limits defined in spec.proxy.runtime.container.
  • OSSM-535 Support validationMessages in SMCP. The ValidationMessages field in the Service Mesh Control Plane can now be set to True. This writes a log for the status of the resources, which can be helpful when troubleshooting problems.
  • OSSM-449 VirtualService and Service causes an error "Only unique values for domains are permitted. Duplicate entry of domain."
  • OSSM-419 Namespaces with similar names will all show in Kiali namespace list, even though namespaces may not be defined in Service Mesh Member Role.
  • OSSM-296 When adding health configuration to the Kiali custom resource (CR) is it not being replicated to the Kiali configmap.
  • OSSM-291 In the Kiali console, on the Applications, Services, and Workloads pages, the "Remove Label from Filters" function is not working.
  • OSSM-289 In the Kiali console, on the Service Details pages for the 'istio-ingressgateway' and 'jaeger-query' services there are no Traces being displayed. The traces exist in Jaeger.
  • OSSM-287 In the Kiali console there are no traces being displayed on the Graph Service.
  • OSSM-285 When trying to access the Kiali console, receive the following error message "Error trying to get OAuth Metadata".

    Workaround: Restart the Kiali pod.

  • MAISTRA-2735 The resources that the Service Mesh Operator deletes when reconciling the SMCP changed in Red Hat OpenShift Service Mesh version 2.1. Previously, the Operator deleted a resource with the following labels:

    • maistra.io/owner
    • app.kubernetes.io/version

    Now, the Operator ignores resources that does not also include the app.kubernetes.io/managed-by=maistra-istio-operator label. If you create your own resources, you should not add the app.kubernetes.io/managed-by=maistra-istio-operator label to them.

  • MAISTRA-2687 Red Hat OpenShift Service Mesh 2.1 federation gateway does not send the full certificate chain when using external certificates. The Service Mesh federation egress gateway only sends the client certificate. Because the federation ingress gateway only knows about the root certificate, it cannot verify the client certificate unless you add the root certificate to the federation import ConfigMap.
  • MAISTRA-2635 Replace deprecated Kubernetes API. To remain compatible with OpenShift Container Platform 4.8, the apiextensions.k8s.io/v1beta1 API was deprecated as of Red Hat OpenShift Service Mesh 2.0.8.
  • MAISTRA-2631 The WASM feature is not working because podman is failing due to nsenter binary not being present. Red Hat OpenShift Service Mesh generates the following error message: Error: error configuring CNI network plugin exec: "nsenter": executable file not found in $PATH. The container image now contains nsenter and WASM works as expected.
  • MAISTRA-2534 When istiod attempted to fetch the JWKS for an issuer specified in a JWT rule, the issuer service responded with a 502. This prevented the proxy container from becoming ready and caused deployments to hang. The fix for the community bug has been included in the Service Mesh 2.0.7 release.
  • MAISTRA-2411 When the Operator creates a new ingress gateway using spec.gateways.additionaIngress in the ServiceMeshControlPlane, Operator is not creating a NetworkPolicy for the additional ingress gateway like it does for the default istio-ingressgateway. This is causing a 503 response from the route of the new gateway.

    Workaround: Manually create the NetworkPolicy in the istio-system namespace.

  • MAISTRA-2401 CVE-2021-3586 servicemesh-operator: NetworkPolicy resources incorrectly specified ports for ingress resources. The NetworkPolicy resources installed for Red Hat OpenShift Service Mesh did not properly specify which ports could be accessed. This allowed access to all ports on these resources from any pod. Network policies applied to the following resources are affected:

    • Galley
    • Grafana
    • Istiod
    • Jaeger
    • Kiali
    • Prometheus
    • Sidecar injector
  • MAISTRA-2378 When the cluster is configured to use OpenShift SDN with ovs-multitenant and the mesh contains a large number of namespaces (200+), the OpenShift Container Platform networking plugin is unable to configure the namespaces quickly. Service Mesh times out causing namespaces to be continuously dropped from the service mesh and then reenlisted.
  • MAISTRA-2370 Handle tombstones in listerInformer. The updated cache codebase was not handling tombstones when translating the events from the namespace caches to the aggregated cache, leading to a panic in the go routine.
  • MAISTRA-2117 Add optional ConfigMap mount to operator. The CSV now contains an optional ConfigMap volume mount, which mounts the smcp-templates ConfigMap if it exists. If the smcp-templates ConfigMap does not exist, the mounted directory is empty. When you create the ConfigMap, the directory is populated with the entries from the ConfigMap and can be referenced in SMCP.spec.profiles. No restart of the Service Mesh operator is required.

    Customers using the 2.0 operator with a modified CSV to mount the smcp-templates ConfigMap can upgrade to Red Hat OpenShift Service Mesh 2.1. After upgrading, you can continue using an existing ConfigMap, and the profiles it contains, without editing the CSV. Customers that previously used ConfigMap with a different name will either have to rename the ConfigMap or update the CSV after upgrading.

  • MAISTRA-2010 AuthorizationPolicy does not support request.regex.headers field. The validatingwebhook rejects any AuthorizationPolicy with the field, and even if you disable that, Pilot tries to validate it using the same code, and it does not work.
  • MAISTRA-1979 Migration to 2.0 The conversion webhook drops the following important fields when converting SMCP.status from v2 to v1:

    • conditions
    • components
    • observedGeneration
    • annotations

      Upgrading the operator to 2.0 might break client tools that read the SMCP status using the maistra.io/v1 version of the resource.

      This also causes the READY and STATUS columns to be empty when you run oc get servicemeshcontrolplanes.v1.maistra.io.

  • MAISTRA-1947 Technology Preview Updates to ServiceMeshExtensions are not applied.

    Workaround: Remove and recreate the ServiceMeshExtensions.

  • MAISTRA-1983 Migration to 2.0 Upgrading to 2.0.0 with an existing invalid ServiceMeshControlPlane cannot easily be repaired. The invalid items in the ServiceMeshControlPlane resource caused an unrecoverable error. The fix makes the errors recoverable. You can delete the invalid resource and replace it with a new one or edit the resource to fix the errors. For more information about editing your resource, see [Configuring the Red Hat OpenShift Service Mesh installation].
  • MAISTRA-1502 As a result of CVEs fixes in version 1.0.10, the Istio dashboards are not available from the Home Dashboard menu in Grafana. To access the Istio dashboards, click the Dashboard menu in the navigation panel and select the Manage tab.
  • MAISTRA-1399 Red Hat OpenShift Service Mesh no longer prevents you from installing unsupported CNI protocols. The supported network configurations has not changed.
  • MAISTRA-1089 Migration to 2.0 Gateways created in a non-control plane namespace are automatically deleted. After removing the gateway definition from the SMCP spec, you need to manually delete these resources.
  • MAISTRA-858 The following Envoy log messages describing deprecated options and configurations associated with Istio 1.1.x are expected:

    • [2019-06-03 07:03:28.943][19][warning][misc] [external/envoy/source/common/protobuf/utility.cc:129] Using deprecated option 'envoy.api.v2.listener.Filter.config'. This configuration will be removed from Envoy soon.
    • [2019-08-12 22:12:59.001][13][warning][misc] [external/envoy/source/common/protobuf/utility.cc:174] Using deprecated option 'envoy.api.v2.Listener.use_original_dst' from file lds.proto. This configuration will be removed from Envoy soon.
  • MAISTRA-806 Evicted Istio Operator Pod causes mesh and CNI not to deploy.

    Workaround: If the istio-operator pod is evicted while deploying the control pane, delete the evicted istio-operator pod.

  • MAISTRA-681 When the Service Mesh control plane has many namespaces, it can lead to performance issues.
  • MAISTRA-193 Unexpected console info messages are visible when health checking is enabled for citadel.
  • Bugzilla 1821432 The toggle controls in OpenShift Container Platform Custom Resource details page does not update the CR correctly. UI Toggle controls in the Service Mesh Control Plane (SMCP) Overview page in the OpenShift Container Platform web console sometimes updates the wrong field in the resource. To update a SMCP, edit the YAML content directly or update the resource from the command line instead of clicking the toggle controls.

2.3. Upgrading Service Mesh

To access the most current features of Red Hat OpenShift Service Mesh, upgrade to the current version, 2.6.4.

2.3.1. Understanding versioning

Red Hat uses semantic versioning for product releases. Semantic Versioning is a 3-component number in the format of X.Y.Z, where:

  • X stands for a Major version. Major releases usually denote some sort of breaking change: architectural changes, API changes, schema changes, and similar major updates.
  • Y stands for a Minor version. Minor releases contain new features and functionality while maintaining backwards compatibility.
  • Z stands for a Patch version (also known as a z-stream release). Patch releases are used to addresses Common Vulnerabilities and Exposures (CVEs) and release bug fixes. New features and functionality are generally not released as part of a Patch release.

2.3.1.1. How versioning affects Service Mesh upgrades

Depending on the version of the update you are making, the upgrade process is different.

  • Patch updates - Patch upgrades are managed by the Operator Lifecycle Manager (OLM); they happen automatically when you update your Operators.
  • Minor upgrades - Minor upgrades require both updating to the most recent Red Hat OpenShift Service Mesh Operator version and manually modifying the spec.version value in your ServiceMeshControlPlane resources.
  • Major upgrades - Major upgrades require both updating to the most recent Red Hat OpenShift Service Mesh Operator version and manually modifying the spec.version value in your ServiceMeshControlPlane resources. Because major upgrades can contain changes that are not backwards compatible, additional manual changes might be required.

2.3.1.2. Understanding Service Mesh versions

In order to understand what version of Red Hat OpenShift Service Mesh you have deployed on your system, you need to understand how each of the component versions is managed.

  • Operator version - The most current Operator version is 2.6.4. The Operator version number only indicates the version of the currently installed Operator. Because the Red Hat OpenShift Service Mesh Operator supports multiple versions of the Service Mesh control plane, the version of the Operator does not determine the version of your deployed ServiceMeshControlPlane resources.

    Important

    Upgrading to the latest Operator version automatically applies patch updates, but does not automatically upgrade your Service Mesh control plane to the latest minor version.

  • ServiceMeshControlPlane version - The ServiceMeshControlPlane version determines what version of Red Hat OpenShift Service Mesh you are using. The value of the spec.version field in the ServiceMeshControlPlane resource controls the architecture and configuration settings that are used to install and deploy Red Hat OpenShift Service Mesh. When you create the Service Mesh control plane you can set the version in one of two ways:

    • To configure in the Form View, select the version from the Control Plane Version menu.
    • To configure in the YAML View, set the value for spec.version in the YAML file.

Operator Lifecycle Manager (OLM) does not manage Service Mesh control plane upgrades, so the version number for your Operator and ServiceMeshControlPlane (SMCP) may not match, unless you have manually upgraded your SMCP.

2.3.2. Upgrade considerations

The maistra.io/ label or annotation should not be used on a user-created custom resource, because it indicates that the resource was generated by and should be managed by the Red Hat OpenShift Service Mesh Operator.

Warning

During the upgrade, the Operator makes changes, including deleting or replacing files, to resources that include the following labels or annotations that indicate that the resource is managed by the Operator.

Before upgrading check for user-created custom resources that include the following labels or annotations:

  • maistra.io/ AND the app.kubernetes.io/managed-by label set to maistra-istio-operator (Red Hat OpenShift Service Mesh)
  • kiali.io/ (Kiali)
  • jaegertracing.io/ (Red Hat OpenShift distributed tracing platform (Jaeger))
  • logging.openshift.io/ (Red Hat Elasticsearch)

Before upgrading, check your user-created custom resources for labels or annotations that indicate they are Operator managed. Remove the label or annotation from custom resources that you do not want to be managed by the Operator.

When upgrading to version 2.0, the Operator only deletes resources with these labels in the same namespace as the SMCP.

When upgrading to version 2.1, the Operator deletes resources with these labels in all namespaces.

2.3.2.1. Known issues that may affect upgrade

Known issues that may affect your upgrade include:

  • When upgrading an Operator, custom configurations for Jaeger or Kiali might be reverted. Before upgrading an Operator, note any custom configuration settings for the Jaeger or Kiali objects in the Service Mesh production deployment so that you can recreate them.
  • Red Hat OpenShift Service Mesh does not support the use of EnvoyFilter configuration except where explicitly documented. This is due to tight coupling with the underlying Envoy APIs, meaning that backward compatibility cannot be maintained. If you are using Envoy Filters, and the configuration generated by Istio has changed due to the lastest version of Envoy introduced by upgrading your ServiceMeshControlPlane, that has the potential to break any EnvoyFilter you may have implemented.
  • OSSM-1505 ServiceMeshExtension does not work with OpenShift Container Platform version 4.11. Because ServiceMeshExtension has been deprecated in Red Hat OpenShift Service Mesh 2.2, this known issue will not be fixed and you must migrate your extensions to WasmPluging
  • OSSM-1396 If a gateway resource contains the spec.externalIPs setting, rather than being recreated when the ServiceMeshControlPlane is updated, the gateway is removed and never recreated.
  • OSSM-1052 When configuring a Service ExternalIP for the ingressgateway in the Service Mesh control plane, the service is not created. The schema for the SMCP is missing the parameter for the service.

    Workaround: Disable the gateway creation in the SMCP spec and manage the gateway deployment entirely manually (including Service, Role and RoleBinding).

2.3.3. Upgrading the Operators

In order to keep your Service Mesh patched with the latest security fixes, bug fixes, and software updates, you must keep your Operators updated. You initiate patch updates by upgrading your Operators.

Important

The version of the Operator does not determine the version of your service mesh. The version of your deployed Service Mesh control plane determines your version of Service Mesh.

Because the Red Hat OpenShift Service Mesh Operator supports multiple versions of the Service Mesh control plane, updating the Red Hat OpenShift Service Mesh Operator does not update the spec.version value of your deployed ServiceMeshControlPlane. Also note that the spec.version value is a two digit number, for example 2.2, and that patch updates, for example 2.2.1, are not reflected in the SMCP version value.

Operator Lifecycle Manager (OLM) controls the installation, upgrade, and role-based access control (RBAC) of Operators in a cluster. The OLM runs by default in OpenShift Container Platform. OLM queries for available Operators as well as upgrades for installed Operators.

Whether or not you have to take action to upgrade your Operators depends on the settings you selected when installing them. When you installed each of your Operators, you selected an Update Channel and an Approval Strategy. The combination of these two settings determine when and how your Operators are updated.

Table 2.3. Interaction of Update Channel and Approval Strategy
 Versioned channel"Stable" or "Preview" Channel

Automatic

Automatically updates the Operator for minor and patch releases for that version only. Will not automatically update to the next major version (that is, from version 2.0 to 3.0). Manual change to Operator subscription required to update to the next major version.

Automatically updates Operator for all major, minor, and patch releases.

Manual

Manual updates required for minor and patch releases for the specified version. Manual change to Operator subscription required to update to the next major version.

Manual updates required for all major, minor, and patch releases.

When you update your Red Hat OpenShift Service Mesh Operator the Operator Lifecycle Manager (OLM) removes the old Operator pod and starts a new pod. Once the new Operator pod starts, the reconciliation process checks the ServiceMeshControlPlane (SMCP), and if there are updated container images available for any of the Service Mesh control plane components, it replaces those Service Mesh control plane pods with ones that use the new container images.

When you upgrade the Kiali and Red Hat OpenShift distributed tracing platform (Jaeger) Operators, the OLM reconciliation process scans the cluster and upgrades the managed instances to the version of the new Operator. For example, if you update the Red Hat OpenShift distributed tracing platform (Jaeger) Operator from version 1.30.2 to version 1.34.1, the Operator scans for running instances of distributed tracing platform (Jaeger) and upgrades them to 1.34.1 as well.

To stay on a particular patch version of Red Hat OpenShift Service Mesh, you would need to disable automatic updates and remain on that specific version of the Operator.

For more information about upgrading Operators, refer to the Operator Lifecycle Manager documentation.

2.3.4. Upgrading the control plane

You must manually update the control plane for minor and major releases. The community Istio project recommends canary upgrades, Red Hat OpenShift Service Mesh only supports in-place upgrades. Red Hat OpenShift Service Mesh requires that you upgrade from each minor release to the next minor release in sequence. For example, you must upgrade from version 2.0 to version 2.1, and then upgrade to version 2.2. You cannot update from Red Hat OpenShift Service Mesh 2.0 to 2.2 directly.

When you upgrade the service mesh control plane, all Operator managed resources, for example gateways, are also upgraded.

Although you can deploy multiple versions of the control plane in the same cluster, Red Hat OpenShift Service Mesh does not support canary upgrades of the service mesh. That is, you can have different SCMP resources with different values for spec.version, but they cannot be managing the same mesh.

For more information about migrating your extensions, refer to Migrating from ServiceMeshExtension to WasmPlugin resources.

2.3.4.1. Upgrade changes from version 2.5 to version 2.6

2.3.4.1.1. Red Hat OpenShift distributed tracing platform (Jaeger) default setting change

This release disables Red Hat OpenShift distributed tracing platform (Jaeger) by default for new instances of the ServiceMeshControlPlane resource.

When updating existing instances of the ServiceMeshControlPlane resource to Red Hat OpenShift Service Mesh version 2.6, distributed tracing platform (Jaeger) remains enabled by default.

Red Hat OpenShift Service Mesh 2.6 is the last release that includes support for Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator. Both distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator will be removed in the next release. If you are currently using distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator, you must migrate to Red Hat OpenShift distributed tracing platform (Tempo) and Red Hat build of OpenTelemetry.

2.3.4.1.2. Envoy sidecar container default setting change

To enhance pod startup times, Istio now includes a startupProbe in sidecar containers by default. The pod’s readiness probes do not start until the Envoy sidecar has started.

2.3.4.2. Upgrade changes from version 2.4 to version 2.5

2.3.4.2.1. Istio OpenShift Routing (IOR) default setting change

The default setting for Istio OpenShift Routing (IOR) has changed. The setting is now disabled by default.

You can use IOR by setting the enabled field to true in the spec.gateways.openshiftRoute specification of the ServiceMeshControlPlane resource.

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  gateways:
    openshiftRoute:
      enabled: true
2.3.4.2.2. Istio proxy concurrency configuration enhancement

For consistency across deployments, Istio now configures the concurrency parameter based on the CPU limit allocated to the proxy container. For example, a limit of 2500m would set the concurrency parameter to 3. If you set the concurrency parameter to a value, Istio uses that value to configure how many threads the proxy runs instead of using the CPU limit.

Previously, the default setting for the parameter was 2.

2.3.4.3. Upgrade changes from version 2.3 to version 2.4

Upgrading the Service Mesh control plane from version 2.3 to 2.4 introduces the following behavioral changes:

  • Support for Istio OpenShift Routing (IOR) has been deprecated. IOR functionality is still enabled, but it will be removed in a future release.
  • The following cipher suites are no longer supported, and were removed from the list of ciphers used in client and server side TLS negotiations.

    • ECDHE-ECDSA-AES128-SHA
    • ECDHE-RSA-AES128-SHA
    • AES128-GCM-SHA256
    • AES128-SHA
    • ECDHE-ECDSA-AES256-SHA
    • ECDHE-RSA-AES256-SHA
    • AES256-GCM-SHA384
    • AES256-SHA

      Applications that require access to services that use one of these cipher suites will fail to connect when the proxy initiates a TLS connection.

2.3.4.4. Upgrade changes from version 2.2 to version 2.3

Upgrading the Service Mesh control plane from version 2.2 to 2.3 introduces the following behavioral changes:

  • This release requires use of the WasmPlugin API. Support for the ServiceMeshExtension API, which was deprecated in 2.2, has now been removed. If you attempt to upgrade while using the ServiceMeshExtension API, then the upgrade fails.

2.3.4.5. Upgrade changes from version 2.1 to version 2.2

Upgrading the Service Mesh control plane from version 2.1 to 2.2 introduces the following behavioral changes:

  • The istio-node DaemonSet is renamed to istio-cni-node to match the name in upstream Istio.
  • Istio 1.10 updated Envoy to send traffic to the application container using eth0 rather than lo by default.
  • This release adds support for the WasmPlugin API and deprecates the ServiceMeshExtension API.

2.3.4.6. Upgrade changes from version 2.0 to version 2.1

Upgrading the Service Mesh control plane from version 2.0 to 2.1 introduces the following architectural and behavioral changes.

Architecture changes

Mixer has been completely removed in Red Hat OpenShift Service Mesh 2.1. Upgrading from a Red Hat OpenShift Service Mesh 2.0.x release to 2.1 will be blocked if Mixer is enabled.

If you see the following message when upgrading from v2.0 to v2.1, update the existing Mixer type to Istiod type in the existing Control Plane spec before you update the .spec.version field:

An error occurred
admission webhook smcp.validation.maistra.io denied the request: [support for policy.type "Mixer" and policy.Mixer options have been removed in v2.1, please use another alternative, support for telemetry.type "Mixer" and telemetry.Mixer options have been removed in v2.1, please use another alternative]”

For example:

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  policy:
    type: Istiod
  telemetry:
    type: Istiod
  version: v2.6

Behavioral changes

  • AuthorizationPolicy updates:

    • With the PROXY protocol, if you are using ipBlocks and notIpBlocks to specify remote IP addresses, update the configuration to use remoteIpBlocks and notRemoteIpBlocks instead.
    • Added support for nested JSON Web Token (JWT) claims.
  • EnvoyFilter breaking changes>

    • Must use typed_config
    • xDS v2 is no longer supported
    • Deprecated filter names
  • Older versions of proxies may report 503 status codes when receiving 1xx or 204 status codes from newer proxies.

2.3.4.7. Upgrading the Service Mesh control plane

To upgrade Red Hat OpenShift Service Mesh, you must update the version field of the Red Hat OpenShift Service Mesh ServiceMeshControlPlane v2 resource. Then, once it is configured and applied, restart the application pods to update each sidecar proxy and its configuration.

Prerequisites

  • You are running OpenShift Container Platform 4.9 or later.
  • You have the latest Red Hat OpenShift Service Mesh Operator.

Procedure

  1. Switch to the project that contains your ServiceMeshControlPlane resource. In this example, istio-system is the name of the Service Mesh control plane project.

    $ oc project istio-system
  2. Check your v2 ServiceMeshControlPlane resource configuration to verify it is valid.

    1. Run the following command to view your ServiceMeshControlPlane resource as a v2 resource.

      $ oc get smcp -o yaml
      Tip

      Back up your Service Mesh control plane configuration.

  3. Update the .spec.version field and apply the configuration.

    For example:

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
    spec:
      version: v2.6

    Alternatively, instead of using the command line, you can use the web console to edit the Service Mesh control plane. In the OpenShift Container Platform web console, click Project and select the project name you just entered.

    1. Click Operators Installed Operators.
    2. Find your ServiceMeshControlPlane instance.
    3. Select YAML view and update text of the YAML file, as shown in the previous example.
    4. Click Save.

2.3.4.8. Migrating Red Hat OpenShift Service Mesh from version 1.1 to version 2.0

Upgrading from version 1.1 to 2.0 requires manual steps that migrate your workloads and application to a new instance of Red Hat OpenShift Service Mesh running the new version.

Prerequisites

  • You must upgrade to OpenShift Container Platform 4.7. before you upgrade to Red Hat OpenShift Service Mesh 2.0.
  • You must have Red Hat OpenShift Service Mesh version 2.0 operator. If you selected the automatic upgrade path, the operator automatically downloads the latest information. However, there are steps you must take to use the features in Red Hat OpenShift Service Mesh version 2.0.
2.3.4.8.1. Upgrading Red Hat OpenShift Service Mesh

To upgrade Red Hat OpenShift Service Mesh, you must create an instance of Red Hat OpenShift Service Mesh ServiceMeshControlPlane v2 resource in a new namespace. Then, once it is configured, move your microservice applications and workloads from your old mesh to the new service mesh.

Procedure

  1. Check your v1 ServiceMeshControlPlane resource configuration to make sure it is valid.

    1. Run the following command to view your ServiceMeshControlPlane resource as a v2 resource.

      $ oc get smcp -o yaml
    2. Check the spec.techPreview.errored.message field in the output for information about any invalid fields.
    3. If there are invalid fields in your v1 resource, the resource is not reconciled and cannot be edited as a v2 resource. All updates to v2 fields will be overridden by the original v1 settings. To fix the invalid fields, you can replace, patch, or edit the v1 version of the resource. You can also delete the resource without fixing it. After the resource has been fixed, it can be reconciled, and you can to modify or view the v2 version of the resource.
    4. To fix the resource by editing a file, use oc get to retrieve the resource, edit the text file locally, and replace the resource with the file you edited.

      $ oc get smcp.v1.maistra.io <smcp_name> > smcp-resource.yaml
      #Edit the smcp-resource.yaml file.
      $ oc replace -f smcp-resource.yaml
    5. To fix the resource using patching, use oc patch.

      $ oc patch smcp.v1.maistra.io <smcp_name> --type json --patch '[{"op": "replace","path":"/spec/path/to/bad/setting","value":"corrected-value"}]'
    6. To fix the resource by editing with command line tools, use oc edit.

      $ oc edit smcp.v1.maistra.io <smcp_name>
  2. Back up your Service Mesh control plane configuration. Switch to the project that contains your ServiceMeshControlPlane resource. In this example, istio-system is the name of the Service Mesh control plane project.

    $ oc project istio-system
  3. Enter the following command to retrieve the current configuration. Your <smcp_name> is specified in the metadata of your ServiceMeshControlPlane resource, for example basic-install or full-install.

    $ oc get servicemeshcontrolplanes.v1.maistra.io <smcp_name> -o yaml > <smcp_name>.v1.yaml
  4. Convert your ServiceMeshControlPlane to a v2 control plane version that contains information about your configuration as a starting point.

    $ oc get smcp <smcp_name> -o yaml > <smcp_name>.v2.yaml
  5. Create a project. In the OpenShift Container Platform console Project menu, click New Project and enter a name for your project, istio-system-upgrade, for example. Or, you can run this command from the CLI.

    $ oc new-project istio-system-upgrade
  6. Update the metadata.namespace field in your v2 ServiceMeshControlPlane with your new project name. In this example, use istio-system-upgrade.
  7. Update the version field from 1.1 to 2.0 or remove it in your v2 ServiceMeshControlPlane.
  8. Create a ServiceMeshControlPlane in the new namespace. On the command line, run the following command to deploy the control plane with the v2 version of the ServiceMeshControlPlane that you retrieved. In this example, replace `<smcp_name.v2> `with the path to your file.

    $ oc create -n istio-system-upgrade -f <smcp_name>.v2.yaml

    Alternatively, you can use the console to create the Service Mesh control plane. In the OpenShift Container Platform web console, click Project. Then, select the project name you just entered.

    1. Click Operators Installed Operators.
    2. Click Create ServiceMeshControlPlane.
    3. Select YAML view and paste text of the YAML file you retrieved into the field. Check that the apiVersion field is set to maistra.io/v2 and modify the metadata.namespace field to use the new namespace, for example istio-system-upgrade.
    4. Click Create.
2.3.4.8.2. Configuring the 2.0 ServiceMeshControlPlane

The ServiceMeshControlPlane resource has been changed for Red Hat OpenShift Service Mesh version 2.0. After you created a v2 version of the ServiceMeshControlPlane resource, modify it to take advantage of the new features and to fit your deployment. Consider the following changes to the specification and behavior of Red Hat OpenShift Service Mesh 2.0 as you are modifying your ServiceMeshControlPlane resource. You can also refer to the Red Hat OpenShift Service Mesh 2.0 product documentation for new information to features you use. The v2 resource must be used for Red Hat OpenShift Service Mesh 2.0 installations.

2.3.4.8.2.1. Architecture changes

The architectural units used by previous versions have been replaced by Istiod. In 2.0 the Service Mesh control plane components Mixer, Pilot, Citadel, Galley, and the sidecar injector functionality have been combined into a single component, Istiod.

Although Mixer is no longer supported as a control plane component, Mixer policy and telemetry plugins are now supported through WASM extensions in Istiod. Mixer can be enabled for policy and telemetry if you need to integrate legacy Mixer plugins.

Secret Discovery Service (SDS) is used to distribute certificates and keys to sidecars directly from Istiod. In Red Hat OpenShift Service Mesh version 1.1, secrets were generated by Citadel, which were used by the proxies to retrieve their client certificates and keys.

2.3.4.8.2.2. Annotation changes

The following annotations are no longer supported in v2.0. If you are using one of these annotations, you must update your workload before moving it to a v2.0 Service Mesh control plane.

  • sidecar.maistra.io/proxyCPULimit has been replaced with sidecar.istio.io/proxyCPULimit. If you were using sidecar.maistra.io annotations on your workloads, you must modify those workloads to use sidecar.istio.io equivalents instead.
  • sidecar.maistra.io/proxyMemoryLimit has been replaced with sidecar.istio.io/proxyMemoryLimit
  • sidecar.istio.io/discoveryAddress is no longer supported. Also, the default discovery address has moved from pilot.<control_plane_namespace>.svc:15010 (or port 15011, if mtls is enabled) to istiod-<smcp_name>.<control_plane_namespace>.svc:15012.
  • The health status port is no longer configurable and is hard-coded to 15021. * If you were defining a custom status port, for example, status.sidecar.istio.io/port, you must remove the override before moving the workload to a v2.0 Service Mesh control plane. Readiness checks can still be disabled by setting the status port to 0.
  • Kubernetes Secret resources are no longer used to distribute client certificates for sidecars. Certificates are now distributed through Istiod’s SDS service. If you were relying on mounted secrets, they are longer available for workloads in v2.0 Service Mesh control planes.
2.3.4.8.2.3. Behavioral changes

Some features in Red Hat OpenShift Service Mesh 2.0 work differently than they did in previous versions.

  • The readiness port on gateways has moved from 15020 to 15021.
  • The target host visibility includes VirtualService, as well as ServiceEntry resources. It includes any restrictions applied through Sidecar resources.
  • Automatic mutual TLS is enabled by default. Proxy to proxy communication is automatically configured to use mTLS, regardless of global PeerAuthentication policies in place.
  • Secure connections are always used when proxies communicate with the Service Mesh control plane regardless of spec.security.controlPlane.mtls setting. The spec.security.controlPlane.mtls setting is only used when configuring connections for Mixer telemetry or policy.
2.3.4.8.2.4. Migration details for unsupported resources

Policy (authentication.istio.io/v1alpha1)

Policy resources must be migrated to new resource types for use with v2.0 Service Mesh control planes, PeerAuthentication and RequestAuthentication. Depending on the specific configuration in your Policy resource, you may have to configure multiple resources to achieve the same effect.

Mutual TLS

Mutual TLS enforcement is accomplished using the security.istio.io/v1beta1 PeerAuthentication resource. The legacy spec.peers.mtls.mode field maps directly to the new resource’s spec.mtls.mode field. Selection criteria has changed from specifying a service name in spec.targets[x].name to a label selector in spec.selector.matchLabels. In PeerAuthentication, the labels must match the selector on the services named in the targets list. Any port-specific settings will need to be mapped into spec.portLevelMtls.

Authentication

Additional authentication methods specified in spec.origins, must be mapped into a security.istio.io/v1beta1 RequestAuthentication resource. spec.selector.matchLabels must be configured similarly to the same field on PeerAuthentication. Configuration specific to JWT principals from spec.origins.jwt items map to similar fields in spec.rules items.

  • spec.origins[x].jwt.triggerRules specified in the Policy must be mapped into one or more security.istio.io/v1beta1 AuthorizationPolicy resources. Any spec.selector.labels must be configured similarly to the same field on RequestAuthentication.
  • spec.origins[x].jwt.triggerRules.excludedPaths must be mapped into an AuthorizationPolicy whose spec.action is set to ALLOW, with spec.rules[x].to.operation.path entries matching the excluded paths.
  • spec.origins[x].jwt.triggerRules.includedPaths must be mapped into a separate AuthorizationPolicy whose spec.action is set to ALLOW, with spec.rules[x].to.operation.path entries matching the included paths, and spec.rules.[x].from.source.requestPrincipals entries that align with the specified spec.origins[x].jwt.issuer in the Policy resource.

ServiceMeshPolicy (maistra.io/v1)

ServiceMeshPolicy was configured automatically for the Service Mesh control plane through the spec.istio.global.mtls.enabled in the v1 resource or spec.security.dataPlane.mtls in the v2 resource setting. For v2 control planes, a functionally equivalent PeerAuthentication resource is created during installation. This feature is deprecated in Red Hat OpenShift Service Mesh version 2.0

RbacConfig, ServiceRole, ServiceRoleBinding (rbac.istio.io/v1alpha1)

These resources were replaced by the security.istio.io/v1beta1 AuthorizationPolicy resource.

Mimicking RbacConfig behavior requires writing a default AuthorizationPolicy whose settings depend on the spec.mode specified in the RbacConfig.

  • When spec.mode is set to OFF, no resource is required as the default policy is ALLOW, unless an AuthorizationPolicy applies to the request.
  • When spec.mode is set to ON, set spec: {}. You must create AuthorizationPolicy policies for all services in the mesh.
  • spec.mode is set to ON_WITH_INCLUSION, must create an AuthorizationPolicy with spec: {} in each included namespace. Inclusion of individual services is not supported by AuthorizationPolicy. However, as soon as any AuthorizationPolicy is created that applies to the workloads for the service, all other requests not explicitly allowed will be denied.
  • When spec.mode is set to ON_WITH_EXCLUSION, it is not supported by AuthorizationPolicy. A global DENY policy can be created, but an AuthorizationPolicy must be created for every workload in the mesh because there is no allow-all policy that can be applied to either a namespace or a workload.

AuthorizationPolicy includes configuration for both the selector to which the configuration applies, which is similar to the function ServiceRoleBinding provides and the rules which should be applied, which is similar to the function ServiceRole provides.

ServiceMeshRbacConfig (maistra.io/v1)

This resource is replaced by using a security.istio.io/v1beta1 AuthorizationPolicy resource with an empty spec.selector in the Service Mesh control plane’s namespace. This policy will be the default authorization policy applied to all workloads in the mesh. For specific migration details, see RbacConfig above.

2.3.4.8.2.5. Mixer plugins

Mixer components are disabled by default in version 2.0. If you rely on Mixer plugins for your workload, you must configure your version 2.0 ServiceMeshControlPlane to include the Mixer components.

To enable the Mixer policy components, add the following snippet to your ServiceMeshControlPlane.

spec:
  policy:
    type: Mixer

To enable the Mixer telemetry components, add the following snippet to your ServiceMeshControlPlane.

spec:
  telemetry:
    type: Mixer

Legacy mixer plugins can also be migrated to WASM and integrated using the new ServiceMeshExtension (maistra.io/v1alpha1) custom resource.

Built-in WASM filters included in the upstream Istio distribution are not available in Red Hat OpenShift Service Mesh 2.0.

2.3.4.8.2.6. Mutual TLS changes

When using mTLS with workload specific PeerAuthentication policies, a corresponding DestinationRule is required to allow traffic if the workload policy differs from the namespace/global policy.

Auto mTLS is enabled by default, but can be disabled by setting spec.security.dataPlane.automtls to false in the ServiceMeshControlPlane resource. When disabling auto mTLS, DestinationRules may be required for proper communication between services. For example, setting PeerAuthentication to STRICT for one namespace may prevent services in other namespaces from accessing them, unless a DestinationRule configures TLS mode for the services in the namespace.

For information about mTLS, see Enabling mutual Transport Layer Security (mTLS)

2.3.4.8.2.6.1. Other mTLS Examples

To disable mTLS For productpage service in the bookinfo sample application, your Policy resource was configured the following way for Red Hat OpenShift Service Mesh v1.1.

Example Policy resource

apiVersion: authentication.istio.io/v1alpha1
kind: Policy
metadata:
  name: productpage-mTLS-disable
  namespace: <namespace>
spec:
  targets:
  - name: productpage

To disable mTLS For productpage service in the bookinfo sample application, use the following example to configure your PeerAuthentication resource for Red Hat OpenShift Service Mesh v2.0.

Example PeerAuthentication resource

apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: productpage-mTLS-disable
  namespace: <namespace>
spec:
  mtls:
    mode: DISABLE
  selector:
    matchLabels:
      # this should match the selector for the "productpage" service
      app: productpage

To enable mTLS With JWT authentication for the productpage service in the bookinfo sample application, your Policy resource was configured the following way for Red Hat OpenShift Service Mesh v1.1.

Example Policy resource

apiVersion: authentication.istio.io/v1alpha1
kind: Policy
metadata:
  name: productpage-mTLS-with-JWT
  namespace: <namespace>
spec:
  targets:
  - name: productpage
    ports:
    - number: 9000
  peers:
  - mtls:
  origins:
  - jwt:
      issuer: "https://securetoken.google.com"
      audiences:
      - "productpage"
      jwksUri: "https://www.googleapis.com/oauth2/v1/certs"
      jwtHeaders:
      - "x-goog-iap-jwt-assertion"
      triggerRules:
      - excludedPaths:
        - exact: /health_check
  principalBinding: USE_ORIGIN

To enable mTLS With JWT authentication for the productpage service in the bookinfo sample application, use the following example to configure your PeerAuthentication resource for Red Hat OpenShift Service Mesh v2.0.

Example PeerAuthentication resource

#require mtls for productpage:9000
apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: productpage-mTLS-with-JWT
  namespace: <namespace>
spec:
  selector:
    matchLabels:
      # this should match the selector for the "productpage" service
      app: productpage
  portLevelMtls:
    9000:
      mode: STRICT
---
#JWT authentication for productpage
apiVersion: security.istio.io/v1beta1
kind: RequestAuthentication
metadata:
  name: productpage-mTLS-with-JWT
  namespace: <namespace>
spec:
  selector:
    matchLabels:
      # this should match the selector for the "productpage" service
      app: productpage
  jwtRules:
  - issuer: "https://securetoken.google.com"
    audiences:
    - "productpage"
    jwksUri: "https://www.googleapis.com/oauth2/v1/certs"
    fromHeaders:
    - name: "x-goog-iap-jwt-assertion"
---
#Require JWT token to access product page service from
#any client to all paths except /health_check
apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: productpage-mTLS-with-JWT
  namespace: <namespace>
spec:
  action: ALLOW
  selector:
    matchLabels:
      # this should match the selector for the "productpage" service
      app: productpage
  rules:
  - to: # require JWT token to access all other paths
      - operation:
          notPaths:
          - /health_check
    from:
      - source:
          # if using principalBinding: USE_PEER in the Policy,
          # then use principals, e.g.
          # principals:
          # - “*”
          requestPrincipals:
          - “*”
  - to: # no JWT token required to access health_check
      - operation:
          paths:
          - /health_check

2.3.4.8.3. Configuration recipes

You can configure the following items with these configuration recipes.

2.3.4.8.3.1. Mutual TLS in a data plane

Mutual TLS for data plane communication is configured through spec.security.dataPlane.mtls in the ServiceMeshControlPlane resource, which is false by default.

2.3.4.8.3.2. Custom signing key

Istiod manages client certificates and private keys used by service proxies. By default, Istiod uses a self-signed certificate for signing, but you can configure a custom certificate and private key. For more information about how to configure signing keys, see Adding an external certificate authority key and certificate

2.3.4.8.3.3. Tracing

Tracing is configured in spec.tracing. Currently, the only type of tracer that is supported is Jaeger. Sampling is a scaled integer representing 0.01% increments, for example, 1 is 0.01% and 10000 is 100%. The tracing implementation and sampling rate can be specified:

spec:
  tracing:
    sampling: 100 # 1%
    type: Jaeger

Jaeger is configured in the addons section of the ServiceMeshControlPlane resource.

spec:
  addons:
    jaeger:
      name: jaeger
      install:
        storage:
          type: Memory # or Elasticsearch for production mode
          memory:
            maxTraces: 100000
          elasticsearch: # the following values only apply if storage:type:=Elasticsearch
            storage: # specific storageclass configuration for the Jaeger Elasticsearch (optional)
              size: "100G"
              storageClassName: "storageclass"
            nodeCount: 3
            redundancyPolicy: SingleRedundancy
  runtime:
    components:
      tracing.jaeger: {} # general Jaeger specific runtime configuration (optional)
      tracing.jaeger.elasticsearch: #runtime configuration for Jaeger Elasticsearch deployment (optional)
        container:
          resources:
            requests:
              memory: "1Gi"
              cpu: "500m"
            limits:
              memory: "1Gi"

The Jaeger installation can be customized with the install field. Container configuration, such as resource limits is configured in spec.runtime.components.jaeger related fields. If a Jaeger resource matching the value of spec.addons.jaeger.name exists, the Service Mesh control plane will be configured to use the existing installation. Use an existing Jaeger resource to fully customize your Jaeger installation.

2.3.4.8.3.4. Visualization

Kiali and Grafana are configured under the addons section of the ServiceMeshControlPlane resource.

spec:
  addons:
    grafana:
      enabled: true
      install: {} # customize install
    kiali:
      enabled: true
      name: kiali
      install: {} # customize install

The Grafana and Kiali installations can be customized through their respective install fields. Container customization, such as resource limits, is configured in spec.runtime.components.kiali and spec.runtime.components.grafana. If an existing Kiali resource matching the value of name exists, the Service Mesh control plane configures the Kiali resource for use with the control plane. Some fields in the Kiali resource are overridden, such as the accessible_namespaces list, as well as the endpoints for Grafana, Prometheus, and tracing. Use an existing resource to fully customize your Kiali installation.

2.3.4.8.3.5. Resource utilization and scheduling

Resources are configured under spec.runtime.<component>. The following component names are supported.

ComponentDescriptionVersions supported

security

Citadel container

v1.0/1.1

galley

Galley container

v1.0/1.1

pilot

Pilot/Istiod container

v1.0/1.1/2.0

mixer

istio-telemetry and istio-policy containers

v1.0/1.1

mixer.policy

istio-policy container

v2.0

mixer.telemetry

istio-telemetry container

v2.0

global.oauthproxy

oauth-proxy container used with various addons

v1.0/1.1/2.0

sidecarInjectorWebhook

sidecar injector webhook container

v1.0/1.1

tracing.jaeger

general Jaeger container - not all settings may be applied. Complete customization of Jaeger installation is supported by specifying an existing Jaeger resource in the Service Mesh control plane configuration.

v1.0/1.1/2.0

tracing.jaeger.agent

settings specific to Jaeger agent

v1.0/1.1/2.0

tracing.jaeger.allInOne

settings specific to Jaeger allInOne

v1.0/1.1/2.0

tracing.jaeger.collector

settings specific to Jaeger collector

v1.0/1.1/2.0

tracing.jaeger.elasticsearch

settings specific to Jaeger elasticsearch deployment

v1.0/1.1/2.0

tracing.jaeger.query

settings specific to Jaeger query

v1.0/1.1/2.0

prometheus

prometheus container

v1.0/1.1/2.0

kiali

Kiali container - complete customization of Kiali installation is supported by specifying an existing Kiali resource in the Service Mesh control plane configuration.

v1.0/1.1/2.0

grafana

Grafana container

v1.0/1.1/2.0

3scale

3scale container

v1.0/1.1/2.0

wasmExtensions.cacher

WASM extensions cacher container

v2.0 - tech preview

Some components support resource limiting and scheduling. For more information, see Performance and scalability.

2.3.4.8.4. Next steps for migrating your applications and workloads

Move the application workload to the new mesh and remove the old instances to complete your upgrade.

2.3.5. Upgrading the data plane

Your data plane will still function after you have upgraded the control plane. But in order to apply updates to the Envoy proxy and any changes to the proxy configuration, you must restart your application pods and workloads.

2.3.5.1. Updating your applications and workloads

To complete the migration, restart all of the application pods in the mesh to upgrade the Envoy sidecar proxies and their configuration.

To perform a rolling update of a deployment use the following command:

$ oc rollout restart <deployment>

You must perform a rolling update for all applications that make up the mesh.

2.4. Understanding Service Mesh

Red Hat OpenShift Service Mesh provides a platform for behavioral insight and operational control over your networked microservices in a service mesh. With Red Hat OpenShift Service Mesh, you can connect, secure, and monitor microservices in your OpenShift Container Platform environment.

2.4.1. What is Red Hat OpenShift Service Mesh?

A service mesh is the network of microservices that make up applications in a distributed microservice architecture and the interactions between those microservices. When a Service Mesh grows in size and complexity, it can become harder to understand and manage.

Based on the open source Istio project, Red Hat OpenShift Service Mesh adds a transparent layer on existing distributed applications without requiring any changes to the service code. You add Red Hat OpenShift Service Mesh support to services by deploying a special sidecar proxy to relevant services in the mesh that intercepts all network communication between microservices. You configure and manage the Service Mesh using the Service Mesh control plane features.

Red Hat OpenShift Service Mesh gives you an easy way to create a network of deployed services that provide:

  • Discovery
  • Load balancing
  • Service-to-service authentication
  • Failure recovery
  • Metrics
  • Monitoring

Red Hat OpenShift Service Mesh also provides more complex operational functions including:

  • A/B testing
  • Canary releases
  • Access control
  • End-to-end authentication

2.4.2. Service Mesh architecture

Service mesh technology operates at the network communication level. That is, service mesh components capture or intercept traffic to and from microservices, either modifying requests, redirecting them, or creating new requests to other services.

Service Mesh architecture image

At a high level, Red Hat OpenShift Service Mesh consists of a data plane and a control plane

The data plane is a set of intelligent proxies, running alongside application containers in a pod, that intercept and control all inbound and outbound network communication between microservices in the service mesh. The data plane is implemented in such a way that it intercepts all inbound (ingress) and outbound (egress) network traffic. The Istio data plane consists of Envoy containers running along side application containers in a pod. The Envoy container acts as a proxy, controlling all network communication into and out of the pod.

  • Envoy proxies are the only Istio components that interact with data plane traffic. All incoming (ingress) and outgoing (egress) network traffic between services flows through the proxies. The Envoy proxy also collects all metrics related to services traffic within the mesh. Envoy proxies are deployed as sidecars, running in the same pod as services. Envoy proxies are also used to implement mesh gateways.

    • Sidecar proxies manage inbound and outbound communication for their workload instance.
    • Gateways are proxies operating as load balancers receiving incoming or outgoing HTTP/TCP connections. Gateway configurations are applied to standalone Envoy proxies that are running at the edge of the mesh, rather than sidecar Envoy proxies running alongside your service workloads. You use a Gateway to manage inbound and outbound traffic for your mesh, letting you specify which traffic you want to enter or leave the mesh.

      • Ingress-gateway - Also known as an Ingress Controller, the Ingress Gateway is a dedicated Envoy proxy that receives and controls traffic entering the service mesh. An Ingress Gateway allows features such as monitoring and route rules to be applied to traffic entering the cluster.
      • Egress-gateway - Also known as an egress controller, the Egress Gateway is a dedicated Envoy proxy that manages traffic leaving the service mesh. An Egress Gateway allows features such as monitoring and route rules to be applied to traffic exiting the mesh.

The control plane manages and configures the proxies that make up the data plane. It is the authoritative source for configuration, manages access control and usage policies, and collects metrics from the proxies in the service mesh.

  • The Istio control plane is composed of Istiod which consolidates several previous control plane components (Citadel, Galley, Pilot) into a single binary. Istiod provides service discovery, configuration, and certificate management. It converts high-level routing rules to Envoy configurations and propagates them to the sidecars at runtime.

    • Istiod can act as a Certificate Authority (CA), generating certificates supporting secure mTLS communication in the data plane. You can also use an external CA for this purpose.
    • Istiod is responsible for injecting sidecar proxy containers into workloads deployed to an OpenShift cluster.

Red Hat OpenShift Service Mesh uses the istio-operator to manage the installation of the control plane. An Operator is a piece of software that enables you to implement and automate common activities in your OpenShift cluster. It acts as a controller, allowing you to set or change the desired state of objects in your cluster, in this case, a Red Hat OpenShift Service Mesh installation.

Red Hat OpenShift Service Mesh also bundles the following Istio add-ons as part of the product:

  • Kiali - Kiali is the management console for Red Hat OpenShift Service Mesh. It provides dashboards, observability, and robust configuration and validation capabilities. It shows the structure of your service mesh by inferring traffic topology and displays the health of your mesh. Kiali provides detailed metrics, powerful validation, access to Grafana, and strong integration with the distributed tracing platform (Jaeger).
  • Prometheus - Red Hat OpenShift Service Mesh uses Prometheus to store telemetry information from services. Kiali depends on Prometheus to obtain metrics, health status, and mesh topology.
  • Jaeger - Red Hat OpenShift Service Mesh supports the distributed tracing platform (Jaeger). Jaeger is an open source traceability server that centralizes and displays traces associated with a single request between multiple services. Using the distributed tracing platform (Jaeger) you can monitor and troubleshoot your microservices-based distributed systems.
  • Elasticsearch - Elasticsearch is an open source, distributed, JSON-based search and analytics engine. The distributed tracing platform (Jaeger) uses Elasticsearch for persistent storage.
  • Grafana - Grafana provides mesh administrators with advanced query and metrics analysis and dashboards for Istio data. Optionally, Grafana can be used to analyze service mesh metrics.

The following Istio integrations are supported with Red Hat OpenShift Service Mesh:

  • 3scale - Istio provides an optional integration with Red Hat 3scale API Management solutions. For versions prior to 2.1, this integration was achieved via the 3scale Istio adapter. For version 2.1 and later, the 3scale integration is achieved via a WebAssembly module.

For information about how to install the 3scale adapter, refer to the 3scale Istio adapter documentation

2.4.3. Understanding Kiali

Kiali provides visibility into your service mesh by showing you the microservices in your service mesh, and how they are connected.

2.4.3.1. Kiali overview

Kiali provides observability into the Service Mesh running on OpenShift Container Platform. Kiali helps you define, validate, and observe your Istio service mesh. It helps you to understand the structure of your service mesh by inferring the topology, and also provides information about the health of your service mesh.

Kiali provides an interactive graph view of your namespace in real time that provides visibility into features like circuit breakers, request rates, latency, and even graphs of traffic flows. Kiali offers insights about components at different levels, from Applications to Services and Workloads, and can display the interactions with contextual information and charts on the selected graph node or edge. Kiali also provides the ability to validate your Istio configurations, such as gateways, destination rules, virtual services, mesh policies, and more. Kiali provides detailed metrics, and a basic Grafana integration is available for advanced queries. Distributed tracing is provided by integrating Jaeger into the Kiali console.

Kiali is installed by default as part of the Red Hat OpenShift Service Mesh.

2.4.3.2. Kiali architecture

Kiali is based on the open source Kiali project. Kiali is composed of two components: the Kiali application and the Kiali console.

  • Kiali application (back end) – This component runs in the container application platform and communicates with the service mesh components, retrieves and processes data, and exposes this data to the console. The Kiali application does not need storage. When deploying the application to a cluster, configurations are set in ConfigMaps and secrets.
  • Kiali console (front end) – The Kiali console is a web application. The Kiali application serves the Kiali console, which then queries the back end for data to present it to the user.

In addition, Kiali depends on external services and components provided by the container application platform and Istio.

  • Red Hat Service Mesh (Istio) - Istio is a Kiali requirement. Istio is the component that provides and controls the service mesh. Although Kiali and Istio can be installed separately, Kiali depends on Istio and will not work if it is not present. Kiali needs to retrieve Istio data and configurations, which are exposed through Prometheus and the cluster API.
  • Prometheus - A dedicated Prometheus instance is included as part of the Red Hat OpenShift Service Mesh installation. When Istio telemetry is enabled, metrics data are stored in Prometheus. Kiali uses this Prometheus data to determine the mesh topology, display metrics, calculate health, show possible problems, and so on. Kiali communicates directly with Prometheus and assumes the data schema used by Istio Telemetry. Prometheus is an Istio dependency and a hard dependency for Kiali, and many of Kiali’s features will not work without Prometheus.
  • Cluster API - Kiali uses the API of the OpenShift Container Platform (cluster API) to fetch and resolve service mesh configurations. Kiali queries the cluster API to retrieve, for example, definitions for namespaces, services, deployments, pods, and other entities. Kiali also makes queries to resolve relationships between the different cluster entities. The cluster API is also queried to retrieve Istio configurations like virtual services, destination rules, route rules, gateways, quotas, and so on.
  • Jaeger - Jaeger is optional, but is installed by default as part of the Red Hat OpenShift Service Mesh installation. When you install the distributed tracing platform (Jaeger) as part of the default Red Hat OpenShift Service Mesh installation, the Kiali console includes a tab to display distributed tracing data. Note that tracing data will not be available if you disable Istio’s distributed tracing feature. Also note that user must have access to the namespace where the Service Mesh control plane is installed to view tracing data.
  • Grafana - Grafana is optional, but is installed by default as part of the Red Hat OpenShift Service Mesh installation. When available, the metrics pages of Kiali display links to direct the user to the same metric in Grafana. Note that user must have access to the namespace where the Service Mesh control plane is installed to view links to the Grafana dashboard and view Grafana data.

2.4.3.3. Kiali features

The Kiali console is integrated with Red Hat Service Mesh and provides the following capabilities:

  • Health – Quickly identify issues with applications, services, or workloads.
  • Topology – Visualize how your applications, services, or workloads communicate via the Kiali graph.
  • Metrics – Predefined metrics dashboards let you chart service mesh and application performance for Go, Node.js. Quarkus, Spring Boot, Thorntail and Vert.x. You can also create your own custom dashboards.
  • Tracing – Integration with Jaeger lets you follow the path of a request through various microservices that make up an application.
  • Validations – Perform advanced validations on the most common Istio objects (Destination Rules, Service Entries, Virtual Services, and so on).
  • Configuration – Optional ability to create, update and delete Istio routing configuration using wizards or directly in the YAML editor in the Kiali Console.

2.4.4. Understanding distributed tracing

Every time a user takes an action in an application, a request is executed by the architecture that may require dozens of different services to participate to produce a response. The path of this request is a distributed transaction. The distributed tracing platform (Jaeger) lets you perform distributed tracing, which follows the path of a request through various microservices that make up an application.

Distributed tracing is a technique that is used to tie the information about different units of work together—usually executed in different processes or hosts—to understand a whole chain of events in a distributed transaction. Distributed tracing lets developers visualize call flows in large service oriented architectures. It can be invaluable in understanding serialization, parallelism, and sources of latency.

The distributed tracing platform (Jaeger) records the execution of individual requests across the whole stack of microservices, and presents them as traces. A trace is a data/execution path through the system. An end-to-end trace comprises one or more spans.

A span represents a logical unit of work that has an operation name, the start time of the operation, and the duration. Spans may be nested and ordered to model causal relationships.

2.4.4.1. Distributed tracing overview

As a service owner, you can use distributed tracing to instrument your services to gather insights into your service architecture. You can use the Red Hat OpenShift distributed tracing platform for monitoring, network profiling, and troubleshooting the interaction between components in modern, cloud-native, microservices-based applications.

With the distributed tracing platform, you can perform the following functions:

  • Monitor distributed transactions
  • Optimize performance and latency
  • Perform root cause analysis

2.4.4.2. Red Hat OpenShift distributed tracing platform architecture

Red Hat OpenShift distributed tracing platform is made up of several components that work together to collect, store, and display tracing data.

  • Red Hat OpenShift distributed tracing platform (Tempo) - This component is based on the open source Grafana Tempo project.

    • Gateway – The Gateway handles authentication, authorization, and forwarding requests to the Distributor or Query front-end service.
    • Distributor – The Distributor accepts spans in multiple formats including Jaeger, OpenTelemetry, and Zipkin. It routes spans to Ingesters by hashing the traceID and using a distributed consistent hash ring.
    • Ingester – The Ingester batches a trace into blocks, creates bloom filters and indexes, and then flushes it all to the back end.
    • Query Frontend – The Query Frontend is responsible for sharding the search space for an incoming query. The search query is then sent to the Queriers. The Query Frontend deployment exposes the Jaeger UI through the Tempo Query sidecar.
    • Querier - The Querier is responsible for finding the requested trace ID in either the Ingesters or the back-end storage. Depending on parameters, it can query the Ingesters and pull Bloom indexes from the back end to search blocks in object storage.
    • Compactor – The Compactors stream blocks to and from the back-end storage to reduce the total number of blocks.
  • Red Hat build of OpenTelemetry - This component is based on the open source OpenTelemetry project.

    • OpenTelemetry Collector - The OpenTelemetry Collector is a vendor-agnostic way to receive, process, and export telemetry data. The OpenTelemetry Collector supports open-source observability data formats, for example, Jaeger and Prometheus, sending to one or more open-source or commercial back-ends. The Collector is the default location instrumentation libraries export their telemetry data.
  • Red Hat OpenShift distributed tracing platform (Jaeger) - This component is based on the open source Jaeger project.

    • Client (Jaeger client, Tracer, Reporter, instrumented application, client libraries)- The distributed tracing platform (Jaeger) clients are language-specific implementations of the OpenTracing API. They can be used to instrument applications for distributed tracing either manually or with a variety of existing open source frameworks, such as Camel (Fuse), Spring Boot (RHOAR), MicroProfile (RHOAR/Thorntail), Wildfly (EAP), and many more, that are already integrated with OpenTracing.
    • Agent (Jaeger agent, Server Queue, Processor Workers) - The distributed tracing platform (Jaeger) agent is a network daemon that listens for spans sent over User Datagram Protocol (UDP), which it batches and sends to the Collector. The agent is meant to be placed on the same host as the instrumented application. This is typically accomplished by having a sidecar in container environments such as Kubernetes.
    • Jaeger Collector (Collector, Queue, Workers) - Similar to the Jaeger agent, the Jaeger Collector receives spans and places them in an internal queue for processing. This allows the Jaeger Collector to return immediately to the client/agent instead of waiting for the span to make its way to the storage.
    • Storage (Data Store) - Collectors require a persistent storage backend. Red Hat OpenShift distributed tracing platform (Jaeger) has a pluggable mechanism for span storage. Red Hat OpenShift distributed tracing platform (Jaeger) supports the Elasticsearch storage.
    • Query (Query Service) - Query is a service that retrieves traces from storage.
    • Ingester (Ingester Service) - Red Hat OpenShift distributed tracing platform can use Apache Kafka as a buffer between the Collector and the actual Elasticsearch backing storage. Ingester is a service that reads data from Kafka and writes to the Elasticsearch storage backend.
    • Jaeger Console – With the Red Hat OpenShift distributed tracing platform (Jaeger) user interface, you can visualize your distributed tracing data. On the Search page, you can find traces and explore details of the spans that make up an individual trace.

2.4.4.3. Red Hat OpenShift distributed tracing platform features

Red Hat OpenShift distributed tracing platform provides the following capabilities:

  • Integration with Kiali – When properly configured, you can view distributed tracing platform data from the Kiali console.
  • High scalability – The distributed tracing platform back end is designed to have no single points of failure and to scale with the business needs.
  • Distributed Context Propagation – Enables you to connect data from different components together to create a complete end-to-end trace.
  • Backwards compatibility with Zipkin – Red Hat OpenShift distributed tracing platform has APIs that enable it to be used as a drop-in replacement for Zipkin, but Red Hat is not supporting Zipkin compatibility in this release.

2.4.5. Next steps

2.5. Service mesh deployment models

Red Hat OpenShift Service Mesh supports several different deployment models that can be combined in different ways to best suit your business requirements.

In Istio, a tenant is a group of users that share common access and privileges for a set of deployed workloads. You can use tenants to provide a level of isolation between different teams. You can segregate access to different tenants using NetworkPolicies, AuthorizationPolicies, and exportTo annotations on istio.io or service resources.

2.5.1. Cluster-Wide (Single Tenant) mesh deployment model

A cluster-wide deployment contains a Service Mesh Control Plane that monitors resources for an entire cluster. Monitoring resources for an entire cluster closely resembles Istio functionality in that the control plane uses a single query across all namespaces to monitor Istio and Kubernetes resources. As a result, cluster-wide deployments decrease the number of requests sent to the API server.

Similar to Istio, a cluster-wide mesh includes namespaces with the istio-injection=enabled namespace label by default. You can change this label by modifying the spec.memberSelectors field of the ServiceMeshMemberRoll resource.

2.5.2. Multitenant deployment model

Red Hat OpenShift Service Mesh installs a ServiceMeshControlPlane that is configured for multitenancy by default. Red Hat OpenShift Service Mesh uses a multitenant Operator to manage the Service Mesh control plane lifecycle. Within a mesh, namespaces are used for tenancy.

Red Hat OpenShift Service Mesh uses ServiceMeshControlPlane resources to manage mesh installations, whose scope is limited by default to namespace that contains the resource. You use ServiceMeshMemberRoll and ServiceMeshMember resources to include additional namespaces into the mesh. A namespace can only be included in a single mesh, and multiple meshes can be installed in a single OpenShift cluster.

Typical service mesh deployments use a single Service Mesh control plane to configure communication between services in the mesh. Red Hat OpenShift Service Mesh supports “soft multitenancy”, where there is one control plane and one mesh per tenant, and there can be multiple independent control planes within the cluster. Multitenant deployments specify the projects that can access the Service Mesh and isolate the Service Mesh from other control plane instances.

The cluster administrator gets control and visibility across all the Istio control planes, while the tenant administrator only gets control over their specific Service Mesh, Kiali, and Jaeger instances.

You can grant a team permission to deploy its workloads only to a given namespace or set of namespaces. If granted the mesh-user role by the service mesh administrator, users can create a ServiceMeshMember resource to add namespaces to the ServiceMeshMemberRoll.

2.5.2.1. About migrating to a cluster-wide mesh

In a cluster-wide mesh, one ServiceMeshControlPlane (SMCP) watches all of the namespaces for an entire cluster. You can migrate an existing cluster from a multitenant mesh to a cluster-wide mesh using Red Hat OpenShift Service Mesh version 2.5 or later.

Note

If a cluster must have more than one SMCP, then you cannot migrate to a cluster-wide mesh.

By default, a cluster-wide mesh discovers all of the namespaces that comprise a cluster. However, you can configure the mesh to access a limited set of namespaces. Namespaces do not receive sidecar injection by default. You must specify which namespaces receive sidecar injection.

Similarly, you must specify which pods receive sidecar injection. Pods that exist in a namespace that receives sidecar injection do not inherit sidecar injection. Applying sidecar injection to namespaces and to pods are separate operations.

If you change the Istio version when migrating to a cluster-wide mesh, then you must restart the applications. If you use the same Istio version, the application proxies will connect to the new SMCP for the cluster-wide mesh, and work the same way they did for a multitenant mesh.

2.5.2.1.1. Including and excluding namespaces from a cluster-wide mesh by using the web console

Using the OpenShift Container Platform web console, you can add discovery selectors to the ServiceMeshControlPlane resource in a cluster-wide mesh. Discovery selectors define the namespaces that the control plane can discover. The control plane ignores any namespace that does not match one of the discovery selectors, which excludes the namespace from the mesh.

Note

If you install ingress or egress gateways in the control plane namespace, you must include the control plane namespace in the discovery selectors.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlane resource.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Red Hat OpenShift Service Mesh Operator.
  4. Click Istio Service Mesh Control Plane.
  5. Click the name of the control plane.
  6. Click YAML.
  7. Modify the YAML file so that the spec.meshConfig field of the ServiceMeshControlPlane resource includes the discovery selector.

    Note

    When configuring namespaces that the Istiod service can discover, exclude namespaces that might contain sensitive services that should not be exposed to the rest of the mesh.

    In the following example, the Istiod service discovers any namespace that is labeled istio-discovery: enabled or any namespace that has the name bookinfo, httpbin or istio-system:

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
    spec:
      mode: ClusterWide
      meshConfig:
        discoverySelectors:
        - matchLabels:
            istio-discovery: enabled 1
        - matchExpressions:
          - key: kubernetes.io/metadata.name 2
            operator: In
            values:
            - bookinfo
            - httpbin
            - istio-system
    1
    Ensures that the mesh discovers namespaces that contain the label istio-discovery: enabled.
    2
    Ensures that the mesh discovers namespaces bookinfo, httpbin and istio-system.

    If a namespace matches any of the discovery selectors, then the mesh discovers the namespace. The mesh excludes namespaces that do not match any of the discovery selectors.

  8. Save the file.
2.5.2.1.2. Including and excluding namespaces from a cluster-wide mesh by using the CLI

Using the OpenShift Container Platform CLI, you can add discovery selectors to the ServiceMeshControlPlane resource in a cluster-wide mesh. Discovery selectors define the namespaces that the control plane can discover. The control plane ignores any namespace that does not match one of the discovery selectors, which excludes the namespace from the mesh.

Note

If you install ingress or egress gateways in the control plane namespace, you must include the control plane namespace in the discovery selectors.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlane resource.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Open the ServiceMeshControlPlane resource as a YAML file by running the following command:

    $ oc -n istio-system edit smcp <name> 1
    1
    <name> represents the name of the ServiceMeshControlPlane resource.
  3. Modify the YAML file so that the spec.meshConfig field of the ServiceMeshControlPlane resource includes the discovery selector.

    Note

    When configuring namespaces that the Istiod service can discover, exclude namespaces that might contain sensitive services that should not be exposed to the rest of the mesh.

    In the following example, the Istiod service discovers any namespace that is labeled istio-discovery: enabled or any namespace that has the name bookinfo, httpbin or istio-system:

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
    spec:
      mode: ClusterWide
      meshConfig:
        discoverySelectors:
        - matchLabels:
            istio-discovery: enabled 1
        - matchExpressions:
          - key: kubernetes.io/metadata.name 2
            operator: In
            values:
            - bookinfo
            - httpbin
            - istio-system
    1
    Ensures that the mesh discovers namespaces that contain the label istio-discovery: enabled.
    2
    Ensures that the mesh discovers namespaces bookinfo, httpbin and istio-system.

    If a namespace matches any of the discovery selectors, then the mesh discovers the namespace. The mesh excludes namespaces that do not match any of the discovery selectors.

  4. Save the file and exit the editor.
2.5.2.1.3. Defining which namespaces receive sidecar injection in a cluster-wide mesh by using the web console

By default, the Red Hat OpenShift Service Mesh Operator uses member selectors to identify which namespaces receive sidecar injection. Namespaces that do not match the istio-injection=enabled label as defined in the ServiceMeshMemberRoll resource do not receive sidecar injection.

Note

Using discovery selectors to determine which namespaces the mesh can discover has no effect on sidecar injection. Discovering namespaces and configuring sidecar injection are separate operations.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlanae resource with the mode: ClusterWide annotation.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Red Hat OpenShift Service Mesh Operator.
  4. Click Istio Service Mesh Member Roll.
  5. Click the ServiceMeshMemberRoll resource.
  6. Click YAML.
  7. Modify the spec.memberSelectors field in the ServiceMeshMemberRoll resource by adding a member selector that matches the inject label. The following example uses istio-injection: enabled:

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
    spec:
      memberSelectors:
      - matchLabels:
          istio-injection: enabled 1
    1
    Ensures that the namespace receives sidecar injection.
  8. Save the file.
2.5.2.1.4. Defining which namespaces receive sidecar injection in a cluster-wide mesh by using the CLI

By default, the Red Hat OpenShift Service Mesh Operator uses member selectors to identify which namespaces receive sidecar injection. Namespaces that do not match the istio-injection=enabled label as defined in the ServiceMeshMemberRoll resource do not receive sidecar injection.

Note

Using discovery selectors to determine which namespaces the mesh can discover has no effect on sidecar injection. Discovering namespaces and configuring sidecar injection are separate operations.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlanae resource with the mode: ClusterWide annotation.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Edit the ServiceMeshMemberRoll resource.

    $ oc edit smmr -n <controlplane-namespace>
  3. Modify the spec.memberSelectors field in the ServiceMeshMemberRoll resource by adding a member selector that matches the inject label. The following example uses istio-injection: enabled:

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
    spec:
      memberSelectors:
      - matchLabels:
          istio-injection: enabled 1
    1
    Ensures that the namespace receives sidecar injection.
  4. Save the file and exit the editor.
2.5.2.1.5. Excluding individual pods from a cluster-wide mesh by using the web console

A pod receives sidecar injection if it has the sidecar.istio.io/inject: true annotation applied, and the pod exists in a namespace that matches either the label selector or the members list defined in the ServiceMeshMemberRoll resource.

If a pod does not have the sidecar.istio.io/inject annotation applied, it cannot receive sidecar injection.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlane resource with the mode: ClusterWide annotation.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Workloads Deployments.
  3. Click the name of the deployment.
  4. Click YAML.
  5. Modify the YAML file to deploy one application that receives sidecar injection and one that does not, as shown in the following example:

    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: nginx
    spec:
      selector:
        matchLabels:
          app: nginx
      template:
        metadata:
          annotations:
            sidecar.istio.io/inject: 'true' 1
          labels:
            app: nginx
        spec:
          containers:
          - name: nginx
            image: nginx:1.14.2
            ports:
            - containerPort: 80
    ---
    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: nginx-without-sidecar
    spec:
      selector:
        matchLabels:
          app: nginx-without-sidecar
      template:
        metadata:
          labels:
            app: nginx-without-sidecar 2
        spec:
          containers:
          - name: nginx
            image: nginx:1.14.2
            ports:
            - containerPort: 80
    1
    This pod has the sidecar.istio.io/inject annotation applied, so it receives sidecar injection.
    2
    This pod does not have the annotation, so it does not receive sidecar injection.
  6. Save the file.
2.5.2.1.6. Excluding individual pods from a cluster-wide mesh by using the CLI

A pod receives sidecar injection if it has the sidecar.istio.io/inject: true annotation applied, and the pod exists in a namespace that matches either the label selector or the members list defined in the ServiceMeshMemberRoll resource.

If a pod does not have the sidecar.istio.io/inject annotation applied, it cannot receive sidecar injection.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You have deployed a ServiceMeshControlPlane resource with the mode: ClusterWide annotation.
  • You are logged in as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you are logged in as a user with the dedicated-admin role.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Edit the deployment by running the following command:

    $ oc edit deployment -n <namespace> <deploymentName>
  3. Modify the YAML file to deploy one application that receives sidecar injection and one that does not, as shown in the following example:

    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: nginx
    spec:
      selector:
        matchLabels:
          app: nginx
      template:
        metadata:
          annotations:
            sidecar.istio.io/inject: 'true' 1
          labels:
            app: nginx
        spec:
          containers:
          - name: nginx
            image: nginx:1.14.2
            ports:
            - containerPort: 80
    ---
    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: nginx-without-sidecar
    spec:
      selector:
        matchLabels:
          app: nginx-without-sidecar
      template:
        metadata:
          labels:
            app: nginx-without-sidecar 2
        spec:
          containers:
          - name: nginx
            image: nginx:1.14.2
            ports:
            - containerPort: 80
    1
    This pod has the sidecar.istio.io/inject annotation applied, so it receives sidecar injection.
    2
    This pod does not have the annotation, so it does not receive sidecar injection.
  4. Save the file.

2.5.3. Multimesh or federated deployment model

Federation is a deployment model that lets you share services and workloads between separate meshes managed in distinct administrative domains.

The Istio multi-cluster model requires a high level of trust between meshes and remote access to all Kubernetes API servers on which the individual meshes reside. Red Hat OpenShift Service Mesh federation takes an opinionated approach to a multi-cluster implementation of Service Mesh that assumes minimal trust between meshes.

A federated mesh is a group of meshes behaving as a single mesh. The services in each mesh can be unique services, for example a mesh adding services by importing them from another mesh, can provide additional workloads for the same services across the meshes, providing high availability, or a combination of both. All meshes that are joined into a federated mesh remain managed individually, and you must explicitly configure which services are exported to and imported from other meshes in the federation. Support functions such as certificate generation, metrics and trace collection remain local in their respective meshes.

2.6. Service Mesh and Istio differences

Red Hat OpenShift Service Mesh differs from an installation of Istio to provide additional features or to handle differences when deploying on OpenShift Container Platform.

2.6.1. Differences between Istio and Red Hat OpenShift Service Mesh

The following features are different in Service Mesh and Istio.

2.6.1.1. Command line tool

The command line tool for Red Hat OpenShift Service Mesh is oc.  Red Hat OpenShift Service Mesh does not support istioctl.

2.6.1.2. Installation and upgrades

Red Hat OpenShift Service Mesh does not support Istio installation profiles.

Red Hat OpenShift Service Mesh does not support canary upgrades of the service mesh.

2.6.1.3. Automatic injection

The upstream Istio community installation automatically injects the sidecar into pods within the projects you have labeled.

Red Hat OpenShift Service Mesh does not automatically inject the sidecar into any pods, but you must opt in to injection using an annotation without labeling projects. This method requires fewer privileges and does not conflict with other OpenShift Container Platform capabilities such as builder pods. To enable automatic injection, specify the sidecar.istio.io/inject label, or annotation, as described in the Automatic sidecar injection section.

Table 2.4. Sidecar injection label and annotation settings
 Upstream IstioRed Hat OpenShift Service Mesh

Namespace Label

supports "enabled" and "disabled"

supports "disabled"

Pod Label

supports "true" and "false"

supports "true" and "false"

Pod Annotation

supports "false" only

supports "true" and "false"

2.6.1.4. Istio Role Based Access Control features

Istio Role Based Access Control (RBAC) provides a mechanism you can use to control access to a service. You can identify subjects by user name or by specifying a set of properties and apply access controls accordingly.

The upstream Istio community installation includes options to perform exact header matches, match wildcards in headers, or check for a header containing a specific prefix or suffix.

Red Hat OpenShift Service Mesh extends the ability to match request headers by using a regular expression. Specify a property key of request.regex.headers with a regular expression.

Upstream Istio community matching request headers example

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: httpbin-usernamepolicy
spec:
  action: ALLOW
  rules:
    - when:
        - key: 'request.regex.headers[username]'
          values:
            - "allowed.*"
  selector:
    matchLabels:
      app: httpbin

2.6.1.5. OpenSSL

Red Hat OpenShift Service Mesh replaces BoringSSL with OpenSSL. OpenSSL is a software library that contains an open source implementation of the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols. The Red Hat OpenShift Service Mesh Proxy binary dynamically links the OpenSSL libraries (libssl and libcrypto) from the underlying Red Hat Enterprise Linux operating system.

2.6.1.6. External workloads

Red Hat OpenShift Service Mesh does not support external workloads, such as virtual machines running outside OpenShift on bare metal servers.

2.6.1.7. Virtual Machine Support

You can deploy virtual machines to OpenShift using OpenShift Virtualization. Then, you can apply a mesh policy, such as mTLS or AuthorizationPolicy, to these virtual machines, just like any other pod that is part of a mesh.

2.6.1.8. Component modifications

  • A maistra-version label has been added to all resources.
  • All Ingress resources have been converted to OpenShift Route resources.
  • Grafana, distributed tracing (Jaeger), and Kiali are enabled by default and exposed through OpenShift routes.
  • Godebug has been removed from all templates
  • The istio-multi ServiceAccount and ClusterRoleBinding have been removed, as well as the istio-reader ClusterRole.

2.6.1.9. Envoy filters

Red Hat OpenShift Service Mesh does not support EnvoyFilter configuration except where explicitly documented. Due to tight coupling with the underlying Envoy APIs, backward compatibility cannot be maintained. EnvoyFilter patches are very sensitive to the format of the Envoy configuration that is generated by Istio. If the configuration generated by Istio changes, it has the potential to break the application of the EnvoyFilter.

2.6.1.10. Envoy services

Red Hat OpenShift Service Mesh does not support QUIC-based services.

2.6.1.11. Istio Container Network Interface (CNI) plugin

Red Hat OpenShift Service Mesh includes CNI plugin, which provides you with an alternate way to configure application pod networking. The CNI plugin replaces the init-container network configuration eliminating the need to grant service accounts and projects access to security context constraints (SCCs) with elevated privileges.

Note

By default, Istio Container Network Interface (CNI) pods are created on all OpenShift Container Platform nodes. To exclude the creation of CNI pods in a specific node, apply the maistra.io/exclude-cni=true label to the node. Adding this label removes any previously deployed Istio CNI pods from the node.

2.6.1.12. Global mTLS settings

Red Hat OpenShift Service Mesh creates a PeerAuthentication resource that enables or disables Mutual TLS authentication (mTLS) within the mesh.

2.6.1.13. Gateways

Red Hat OpenShift Service Mesh installs ingress and egress gateways by default. You can disable gateway installation in the ServiceMeshControlPlane (SMCP) resource by using the following settings:

  • spec.gateways.enabled=false to disable both ingress and egress gateways.
  • spec.gateways.ingress.enabled=false to disable ingress gateways.
  • spec.gateways.egress.enabled=false to disable egress gateways.
Note

The Operator annotates the default gateways to indicate that they are generated by and managed by the Red Hat OpenShift Service Mesh Operator.

2.6.1.14. Multicluster configurations

Red Hat OpenShift Service Mesh support for multicluster configurations is limited to the federation of service meshes across multiple clusters.

2.6.1.15. Custom Certificate Signing Requests (CSR)

You cannot configure Red Hat OpenShift Service Mesh to process CSRs through the Kubernetes certificate authority (CA).

2.6.1.16. Routes for Istio Gateways

OpenShift routes for Istio Gateways are automatically managed in Red Hat OpenShift Service Mesh. Every time an Istio Gateway is created, updated or deleted inside the service mesh, an OpenShift route is created, updated or deleted.

A Red Hat OpenShift Service Mesh control plane component called Istio OpenShift Routing (IOR) synchronizes the gateway route. For more information, see Automatic route creation.

2.6.1.16.1. Catch-all domains

Catch-all domains ("*") are not supported. If one is found in the Gateway definition, Red Hat OpenShift Service Mesh will create the route, but will rely on OpenShift to create a default hostname. This means that the newly created route will not be a catch all ("*") route, instead it will have a hostname in the form <route-name>[-<project>].<suffix>. See the OpenShift Container Platform documentation for more information about how default hostnames work and how a cluster-admin can customize it. If you use Red Hat OpenShift Dedicated, refer to the Red Hat OpenShift Dedicated the dedicated-admin role.

2.6.1.16.2. Subdomains

Subdomains (e.g.: "*.domain.com") are supported. However this ability does not come enabled by default in OpenShift Container Platform. This means that Red Hat OpenShift Service Mesh will create the route with the subdomain, but it will only be in effect if OpenShift Container Platform is configured to enable it.

2.6.1.16.3. Transport layer security

Transport Layer Security (TLS) is supported. This means that, if the Gateway contains a tls section, the OpenShift Route will be configured to support TLS.

Additional resources

2.6.2. Multitenant installations

Whereas upstream Istio takes a single tenant approach, Red Hat OpenShift Service Mesh supports multiple independent control planes within the cluster. Red Hat OpenShift Service Mesh uses a multitenant operator to manage the control plane lifecycle.

Red Hat OpenShift Service Mesh installs a multitenant control plane by default. You specify the projects that can access the Service Mesh, and isolate the Service Mesh from other control plane instances.

2.6.2.1. Multitenancy versus cluster-wide installations

The main difference between a multitenant installation and a cluster-wide installation is the scope of privileges used by istod. The components no longer use cluster-scoped Role Based Access Control (RBAC) resource ClusterRoleBinding.

Every project in the ServiceMeshMemberRoll members list will have a RoleBinding for each service account associated with the control plane deployment and each control plane deployment will only watch those member projects. Each member project has a maistra.io/member-of label added to it, where the member-of value is the project containing the control plane installation.

Red Hat OpenShift Service Mesh configures each member project to ensure network access between itself, the control plane, and other member projects by creating a NetworkPolicy resource in each member project allowing ingress to all pods from the other members and the control plane. If you remove a member from Service Mesh, this NetworkPolicy resource is deleted from the project.

Note

This also restricts ingress to only member projects. If you require ingress from non-member projects, you need to create a NetworkPolicy to allow that traffic through.

2.6.2.2. Cluster scoped resources

Upstream Istio has two cluster scoped resources that it relies on. The MeshPolicy and the ClusterRbacConfig. These are not compatible with a multitenant cluster and have been replaced as described below.

  • ServiceMeshPolicy replaces MeshPolicy for configuration of control-plane-wide authentication policies. This must be created in the same project as the control plane.
  • ServicemeshRbacConfig replaces ClusterRbacConfig for configuration of control-plane-wide role based access control. This must be created in the same project as the control plane.

2.6.3. Kiali and service mesh

Installing Kiali via the Service Mesh on OpenShift Container Platform differs from community Kiali installations in multiple ways. These modifications are sometimes necessary to resolve issues, provide additional features, or to handle differences when deploying on OpenShift Container Platform.

  • Kiali has been enabled by default.
  • Ingress has been enabled by default.
  • Updates have been made to the Kiali ConfigMap.
  • Updates have been made to the ClusterRole settings for Kiali.
  • Do not edit the ConfigMap, because your changes might be overwritten by the Service Mesh or Kiali Operators. Files that the Kiali Operator manages have a kiali.io/ label or annotation. Updating the Operator files should be restricted to those users with cluster-admin privileges. If you use Red Hat OpenShift Dedicated, updating the Operator files should be restricted to those users with dedicated-admin privileges.

2.6.4. Distributed tracing and service mesh

Installing the distributed tracing platform (Jaeger) with the Service Mesh on OpenShift Container Platform differs from community Jaeger installations in multiple ways. These modifications are sometimes necessary to resolve issues, provide additional features, or to handle differences when deploying on OpenShift Container Platform.

  • Distributed tracing has been enabled by default for Service Mesh.
  • Ingress has been enabled by default for Service Mesh.
  • The name for the Zipkin port name has changed to jaeger-collector-zipkin (from http)
  • Jaeger uses Elasticsearch for storage by default when you select either the production or streaming deployment option.
  • The community version of Istio provides a generic "tracing" route. Red Hat OpenShift Service Mesh uses a "jaeger" route that is installed by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator and is already protected by OAuth.
  • Red Hat OpenShift Service Mesh uses a sidecar for the Envoy proxy, and Jaeger also uses a sidecar, for the Jaeger agent. These two sidecars are configured separately and should not be confused with each other. The proxy sidecar creates spans related to the pod’s ingress and egress traffic. The agent sidecar receives the spans emitted by the application and sends them to the Jaeger Collector.

2.7. Preparing to install Service Mesh

Before you can install Red Hat OpenShift Service Mesh, you must subscribe to OpenShift Container Platform and install OpenShift Container Platform in a supported configuration.

2.7.1. Prerequisites

For additional information about Red Hat OpenShift Service Mesh lifecycle and supported platforms, refer to the Support Policy.

2.7.2. Supported configurations

The following configurations are supported for the current release of Red Hat OpenShift Service Mesh.

2.7.2.1. Supported platforms

The Red Hat OpenShift Service Mesh Operator supports multiple versions of the ServiceMeshControlPlane resource. Version 2.6 Service Mesh control planes are supported on the following platform versions:

  • Red Hat OpenShift Container Platform version 4.10 or later
  • Red Hat OpenShift Dedicated version 4
  • Azure Red Hat OpenShift (ARO) version 4
  • Red Hat OpenShift Service on AWS (ROSA)

2.7.2.2. Unsupported configurations

Explicitly unsupported cases include:

  • OpenShift Online is not supported for Red Hat OpenShift Service Mesh.
  • Red Hat OpenShift Service Mesh does not support the management of microservices outside the cluster where Service Mesh is running.

2.7.2.3. Supported network configurations

Red Hat OpenShift Service Mesh supports the following network configurations.

  • OpenShift-SDN
  • OVN-Kubernetes is available on all supported versions of OpenShift Container Platform.
  • Third-Party Container Network Interface (CNI) plugins that have been certified on OpenShift Container Platform and passed Service Mesh conformance testing. See Certified OpenShift CNI Plug-ins for more information.

2.7.2.4. Supported configurations for Service Mesh

  • This release of Red Hat OpenShift Service Mesh is only available on OpenShift Container Platform x86_64, IBM Z®, and IBM Power®.

    • IBM Z® is only supported on OpenShift Container Platform 4.10 and later.
    • IBM Power® is only supported on OpenShift Container Platform 4.10 and later.
  • Configurations where all Service Mesh components are contained within a single OpenShift Container Platform cluster.
  • Configurations that do not integrate external services such as virtual machines.
  • Red Hat OpenShift Service Mesh does not support EnvoyFilter configuration except where explicitly documented.

2.7.2.5. Supported configurations for Kiali

  • The Kiali console is only supported on the two most recent releases of the Google Chrome, Microsoft Edge, Mozilla Firefox, or Apple Safari browsers.
  • The openshift authentication strategy is the only supported authentication configuration when Kiali is deployed with Red Hat OpenShift Service Mesh (OSSM). The openshift strategy controls access based on the individual’s role-based access control (RBAC) roles of the OpenShift Container Platform.

2.7.2.6. Supported configurations for Distributed Tracing

  • Jaeger agent as a sidecar is the only supported configuration for Jaeger. Jaeger as a daemonset is not supported for multitenant installations or OpenShift Dedicated.

2.7.2.7. Supported WebAssembly module

  • 3scale WebAssembly is the only provided WebAssembly module. You can create custom WebAssembly modules.

2.7.3. Next steps

2.8. Installing the Operators

To install Red Hat OpenShift Service Mesh, first install the Red Hat OpenShift Service Mesh Operator and any optional Operators on OpenShift Container Platform. Then create a ServiceMeshControlPlane resource to deploy the control plane.

Note

This basic installation is configured based on the default OpenShift settings and is not designed for production use.  Use this default installation to verify your installation, and then configure your service mesh for your specific environment.

Prerequisites

The following steps show how to install a basic instance of Red Hat OpenShift Service Mesh on OpenShift Container Platform.

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator are deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for these features during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

2.8.1. Service Mesh Operators overview

Red Hat OpenShift Service Mesh requires the use of the Red Hat OpenShift Service Mesh Operator which allows you to connect, secure, control, and observe the microservices that comprise your applications. You can also install other Operators to enhance your service mesh experience.

Warning

Do not install Community versions of the Operators. Community Operators are not supported.

The following Operator is required:

Red Hat OpenShift Service Mesh Operator
Allows you to connect, secure, control, and observe the microservices that comprise your applications. It also defines and monitors the ServiceMeshControlPlane resources that manage the deployment, updating, and deletion of the Service Mesh components. It is based on the open source Istio project.

The following Operators are optional:

Kiali Operator provided by Red Hat
Provides observability for your service mesh. You can view configurations, monitor traffic, and analyze traces in a single console. It is based on the open source Kiali project.
Red Hat OpenShift distributed tracing platform (Tempo)
Provides distributed tracing to monitor and troubleshoot transactions in complex distributed systems. It is based on the open source Grafana Tempo project.

The following optional Operators are deprecated:

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator are deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for these features during the current release lifecycle, but these features will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

Red Hat OpenShift distributed tracing platform (Jaeger)
Provides distributed tracing to monitor and troubleshoot transactions in complex distributed systems. It is based on the open source Jaeger project.
OpenShift Elasticsearch Operator
Provides database storage for tracing and logging with the distributed tracing platform (Jaeger). It is based on the open source Elasticsearch project.

2.8.2. Installing the Operators

To install Red Hat OpenShift Service Mesh, you must install the Red Hat OpenShift Service Mesh Operator. Repeat the procedure for each additional Operator you want to install.

Additional Operators include:

  • Kiali Operator provided by Red Hat
  • Tempo Operator

Deprecated additional Operators include:

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator are deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for these features during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

  • Red Hat OpenShift distributed tracing platform (Jaeger)
  • OpenShift Elasticsearch Operator
Note

If you have already installed the OpenShift Elasticsearch Operator as part of OpenShift Logging, you do not need to install the OpenShift Elasticsearch Operator again. The Red Hat OpenShift distributed tracing platform (Jaeger) Operator creates the Elasticsearch instance using the installed OpenShift Elasticsearch Operator.

Procedure

  1. Log in to the OpenShift Container Platform web console as a user with the cluster-admin role.
  2. In the OpenShift Container Platform web console, click Operators OperatorHub.
  3. Type the name of the Operator into the filter box and select the Red Hat version of the Operator. Community versions of the Operators are not supported.
  4. Click Install.
  5. On the Install Operator page for each Operator, accept the default settings.
  6. Click Install. Wait until the Operator installs before repeating the steps for the next Operator you want to install.

    • The Red Hat OpenShift Service Mesh Operator installs in the openshift-operators namespace and is available for all namespaces in the cluster.
    • The Kiali Operator provided by Red Hat installs in the openshift-operators namespace and is available for all namespaces in the cluster.
    • The Tempo Operator installs in the openshift-tempo-operator namespace and is available for all namespaces in the cluster.
    • The Red Hat OpenShift distributed tracing platform (Jaeger) installs in the openshift-distributed-tracing namespace and is available for all namespaces in the cluster.

      Important

      Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) is deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for this feature during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

    • The OpenShift Elasticsearch Operator installs in the openshift-operators-redhat namespace and is available for all namespaces in the cluster.

      Important

      Starting with Red Hat OpenShift Service Mesh 2.5, OpenShift Elasticsearch Operator is deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for this feature during the current release lifecycle, but this feature will no longer receive enhancements and will be removed.

Verification

  • After all you have installed all four Operators, click Operators Installed Operators to verify that your Operators are installed.

2.8.3. Configuring the Service Mesh Operator to run on infrastructure nodes

This task should only be performed if the Service Mesh Operator runs on an infrastructure node.

If the operator will run on a worker node, skip this task.

Prerequisites

  • The Service Mesh Operator must be installed.
  • One of the nodes comprising the deployment must be an infrastructure node. For more information, see "Creating infrastructure machine sets."

Procedure

  1. List the operators installed in the namespace:

    $ oc -n openshift-operators get subscriptions
  2. Edit the Service Mesh Operator Subscription resource to specify where the operator should run:

    $ oc -n openshift-operators edit subscription <name> 1
    1
    <name> represents the name of the Subscription resource. The default name of the Subscription resource is servicemeshoperator.
  3. Add the nodeSelector and tolerations to spec.config in the Subscription resource:

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      labels:
        operators.coreos.com/servicemeshoperator.openshift-operators: ""
      name: servicemeshoperator
      namespace: openshift-operators
    # ...
    spec:
      config:
        nodeSelector: 1
          node-role.kubernetes.io/infra: ""
        tolerations: 2
        - effect: NoSchedule
          key: node-role.kubernetes.io/infra
          value: reserved
        - effect: NoExecute
          key: node-role.kubernetes.io/infra
          value: reserved
    1
    Ensures that the operator pod is only scheduled on an infrastructure node.
    2
    Ensures that the pod is accepted by the infrastructure node.

2.8.4. Verifying the Service Mesh Operator is running on infrastructure node

Procedure

  • Verify that the node associated with the Operator pod is an infrastructure node:

    $ oc -n openshift-operators get po -l name=istio-operator -owide

2.8.5. Next steps

  • The Red Hat OpenShift Service Mesh Operator does not create the Service Mesh custom resource definitions (CRDs) until you deploy a Service Mesh control plane. You can use the ServiceMeshControlPlane resource to install and configure the Service Mesh components. For more information, see Creating the ServiceMeshControlPlane.

2.9. Creating the ServiceMeshControlPlane

2.9.1. About ServiceMeshControlPlane

The control plane includes Istiod, Ingress and Egress Gateways, and other components, such as Kiali and Jaeger. The control plane must be deployed in a separate namespace than the Service Mesh Operators and the data plane applications and services. You can deploy a basic installation of the ServiceMeshControlPlane(SMCP) from the OpenShift Container Platform web console or the command line using the oc client tool.

Note

This basic installation is configured based on the default OpenShift Container Platform settings and is not designed for production use. Use this default installation to verify your installation, and then configure your ServiceMeshControlPlane settings for your environment.

Note

The Service Mesh documentation uses istio-system as the example project, but you can deploy the service mesh to any project.

2.9.1.1. Deploying the Service Mesh control plane from the web console

You can deploy a basic ServiceMeshControlPlane by using the web console. In this example, istio-system is the name of the Service Mesh control plane project.

Prerequisites

  • The Red Hat OpenShift Service Mesh Operator must be installed.
  • You are logged in to the OpenShift Container Platform web console as cluster-admin.

Procedure

  1. Log in to the OpenShift Container Platform web console as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  2. Create a project named istio-system.

    1. Navigate to Home Projects.
    2. Click Create Project.
    3. In the Name field, enter istio-system. The ServiceMeshControlPlane resource must be installed in a project that is separate from your microservices and Operators.

      These steps use istio-system as an example, but you can deploy your Service Mesh control plane in any project as long as it is separate from the project that contains your services.

    4. Click Create.
  3. Navigate to Operators Installed Operators.
  4. Click the Red Hat OpenShift Service Mesh Operator, then click Istio Service Mesh Control Plane.
  5. On the Istio Service Mesh Control Plane tab, click Create ServiceMeshControlPlane.

    1. Accept the default Service Mesh control plane version to take advantage of the features available in the most current version of the product. The version of the control plane determines the features available regardless of the version of the Operator.
    2. Click Create.

    The Operator creates pods, services, and Service Mesh control plane components based on your configuration parameters. You can configure ServiceMeshControlPlane settings at a later time.

Verification

  • To verify the control plane installed correctly, click the Istio Service Mesh Control Plane tab.

    1. Click the name of the new control plane.
    2. Click the Resources tab to see the Red Hat OpenShift Service Mesh control plane resources the Operator created and configured.

2.9.1.2. Deploying the Service Mesh control plane using the CLI

You can deploy a basic ServiceMeshControlPlane from the command line.

Prerequisites

  • The Red Hat OpenShift Service Mesh Operator must be installed.
  • Access to the OpenShift CLI (oc).
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Create a project named istio-system.

    $ oc new-project istio-system
  2. Create a ServiceMeshControlPlane file named istio-installation.yaml using the following example. The version of the Service Mesh control plane determines the features available regardless of the version of the Operator.

    Example version 2.6 istio-installation.yaml

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      version: v2.6
      tracing:
        type: None
        sampling: 10000
      addons:
        kiali:
          enabled: true
          name: kiali
        grafana:
          enabled: true

  3. Run the following command to deploy the Service Mesh control plane, where <istio_installation.yaml> includes the full path to your file.

    $ oc create -n istio-system -f <istio_installation.yaml>
  4. To watch the progress of the pod deployment, run the following command:

    $ oc get pods -n istio-system -w

    You should see output similar to the following:

    NAME                                   READY   STATUS    RESTARTS   AGE
    grafana-b4d59bd7-mrgbr                 2/2     Running   0          65m
    istio-egressgateway-678dc97b4c-wrjkp   1/1     Running   0          108s
    istio-ingressgateway-b45c9d54d-4qg6n   1/1     Running   0          108s
    istiod-basic-55d78bbbcd-j5556          1/1     Running   0          108s
    kiali-6476c7656c-x5msp                 1/1     Running   0          43m
    prometheus-58954b8d6b-m5std            2/2     Running   0          66m

2.9.1.3. Validating your SMCP installation with the CLI

You can validate the creation of the ServiceMeshControlPlane from the command line.

  1. Prerequisites

    • The Red Hat OpenShift Service Mesh Operator must be installed.
    • Access to the OpenShift CLI (oc).
    • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Run the following command to verify the Service Mesh control plane installation, where istio-system is the namespace where you installed the Service Mesh control plane.

    $ oc get smcp -n istio-system

    The installation has finished successfully when the STATUS column is ComponentsReady.

    NAME    READY   STATUS            PROFILES      VERSION   AGE
    basic   10/10   ComponentsReady   ["default"]   2.6.4     66m

2.9.2. About control plane components and infrastructure nodes

Infrastructure nodes provide a way to isolate infrastructure workloads for two primary purposes:

  • To prevent incurring billing costs against subscription counts
  • To separate maintenance and management of infrastructure workloads

You can configure some or all of the Service Mesh control plane components to run on infrastructure nodes.

2.9.2.1. Configuring all control plane components to run on infrastructure nodes using the web console

Perform this task if all of the components deployed by the Service Mesh control plane will run on infrastructure nodes. These deployed components include Istiod, Ingress Gateway, and Egress Gateway, and optional applications such as Prometheus, Grafana, and Distributed Tracing.

If the control plane will run on a worker node, skip this task.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Red Hat OpenShift Service Mesh Operator, and then click Istio Service Mesh Control Plane.
  4. Click the name of the control plane resource. For example, basic.
  5. Click YAML.
  6. Add the nodeSelector and tolerations fields to the spec.runtime.defaults.pod specification in the ServiceMeshControlPlane resource, as shown in the following example:

    spec:
      runtime:
        defaults:
          pod:
            nodeSelector: 1
              node-role.kubernetes.io/infra: ""
            tolerations: 2
            - effect: NoSchedule
              key: node-role.kubernetes.io/infra
              value: reserved
            - effect: NoExecute
              key: node-role.kubernetes.io/infra
              value: reserved
    1
    Ensures that the ServiceMeshControlPlane pod is only scheduled on an infrastructure node.
    2
    Ensures that the pod is accepted by the infrastructure node for execution.
  7. Click Save.
  8. Click Reload.

2.9.2.2. Configuring individual control plane components to run on infrastructure nodes using the web console

Perform this task if individual components deployed by the Service Mesh control plane will run on infrastructure nodes. These deployed components include Istiod, the Ingress Gateway, and the Egress Gateway.

If the control plane will run on a worker node, skip this task.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Red Hat OpenShift Service Mesh Operator, and then click Istio Service Mesh Control Plane.
  4. Click the name of the control plane resource. For example, basic.
  5. Click YAML.
  6. Add the nodeSelector and tolerations fields to the spec.runtime.components.pilot.pod specification in the ServiceMeshControlPlane resource, as shown in the following example:

    spec:
      runtime:
        components:
          pilot:
            pod:
              nodeSelector: 1
                node-role.kubernetes.io/infra: ""
              tolerations: 2
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
    1
    Ensures that the Istiod pod is only scheduled on an infrastructure node.
    2
    Ensures that the pod is accepted by the infrastructure node for execution.
  7. Add the nodeSelector and the tolerations fields to the spec.gateways.ingress.runtime.pod and spec.gateways.egress.runtime.pod specifications in the ServiceMeshControlPlane resource, as shown in the following example:

    spec:
      gateways:
        ingress:
          runtime:
            pod:
              nodeSelector: 1
                node-role.kubernetes.io/infra: ""
              tolerations: 2
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
        egress:
          runtime:
            pod:
              nodeSelector: 3
                node-role.kubernetes.io/infra: ""
              tolerations: 4
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
    1 3
    Ensures that the gateway pod is only scheduled on an infrastructure node
    2 4
    Ensures that the pod is accepted by the infrastructure node for execution.
  8. Click Save.
  9. Click Reload.

2.9.2.3. Configuring all control plane components to run on infrastructure nodes using the CLI

Perform this task if all of the components deployed by the Service Mesh control plane will run on infrastructure nodes. These deployed components include Istiod, Ingress Gateway, and Egress Gateway, and optional applications such as Prometheus, Grafana, and Distributed Tracing.

If the control plane will run on a worker node, skip this task.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Open the ServiceMeshControlPlane resource as a YAML file:

    $ oc -n istio-system edit smcp <name> 1
    1
    <name> represents the name of the ServiceMeshControlPlane resource.
  2. To run all of the Service Mesh components deployed by the ServiceMeshControlPlane on infrastructure nodes, add the nodeSelector and tolerations fields to the spec.runtime.defaults.pod spec in the ServiceMeshControlPlane resource:

    spec:
      runtime:
        defaults:
          pod:
            nodeSelector: 1
              node-role.kubernetes.io/infra: ""
            tolerations: 2
            - effect: NoSchedule
              key: node-role.kubernetes.io/infra
              value: reserved
            - effect: NoExecute
              key: node-role.kubernetes.io/infra
              value: reserved
    1
    Ensures that the SMCP pods are only scheduled on an infrastructure node.
    2
    Ensures that the pods are accepted by the infrastructure node.

2.9.2.4. Configuring individual control plane components to run on infrastructure nodes using the CLI

Perform this task if individual components deployed by the Service Mesh control plane will run on infrastructure nodes. These deployed components include Istiod, the Ingress Gateway, and the Egress Gateway.

If the control plane will run on a worker node, skip this task.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Open the ServiceMeshControlPlane resource as a YAML file.

    $ oc -n istio-system edit smcp <name> 1
    1
    <name> represents the name of the ServiceMeshControlPlane resource.
  2. To run the Istiod component on an infrastructure node, add the nodeSelector and the tolerations fields to the spec.runtime.components.pilot.pod spec in the ServiceMeshControlPlane resource.

    spec:
      runtime:
        components:
          pilot:
            pod:
              nodeSelector: 1
                node-role.kubernetes.io/infra: ""
              tolerations: 2
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
    1
    Ensures that the Istiod pod is only scheduled on an infrastructure node.
    2
    Ensures that the pod is accepted by the infrastructure node.
  3. To run Ingress and Egress Gateways on infrastructure nodes, add the nodeSelector and the tolerations fields to the spec.gateways.ingress.runtime.pod spec and the spec.gateways.egress.runtime.pod spec in the ServiceMeshControlPlane resource.

    spec:
      gateways:
        ingress:
          runtime:
            pod:
              nodeSelector: 1
                node-role.kubernetes.io/infra: ""
              tolerations: 2
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
        egress:
          runtime:
            pod:
              nodeSelector: 3
                node-role.kubernetes.io/infra: ""
              tolerations: 4
              - effect: NoSchedule
                key: node-role.kubernetes.io/infra
                value: reserved
              - effect: NoExecute
                key: node-role.kubernetes.io/infra
                value: reserved
    1 3
    Ensures that the gateway pod is only scheduled on an infrastructure node
    2 4
    Ensures that the pod is accepted by the infrastructure node.

2.9.2.5. Verifying the Service Mesh control plane is running on infrastructure nodes

Procedure

  • Confirm that the nodes associated with Istiod, Ingress Gateway, and Egress Gateway pods are infrastructure nodes:

    $ oc -n istio-system get pods -owide

2.9.3. About control plane and cluster-wide deployments

A cluster-wide deployment contains a Service Mesh Control Plane that monitors resources for an entire cluster. Monitoring resources for an entire cluster closely resembles Istio functionality in that the control plane uses a single query across all namespaces to monitor Istio and Kubernetes resources. As a result, cluster-wide deployments decrease the number of requests sent to the API server.

You can configure the Service Mesh Control Plane for cluster-wide deployments using either the OpenShift Container Platform web console or the CLI.

2.9.3.1. Configuring the control plane for cluster-wide deployment with the web console

You can configure the ServiceMeshControlPlane resource for cluster-wide deployment using the OpenShift Container Platform web console. In this example, istio-system is the name of the Service Mesh control plane project.

Prerequisites

  • The Red Hat OpenShift Service Mesh Operator is installed.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Create a project named istio-system.

    1. Navigate to Home Projects.
    2. Click Create Project.
    3. In the Name field, enter istio-system. The ServiceMeshControlPlane resource must be installed in a project that is separate from your microservices and Operators.

      These steps use istio-system as an example. You can deploy the Service Mesh control plane to any project as long as it is separate from the project that contains your services.

    4. Click Create.
  2. Navigate to Operators Installed Operators.
  3. Click the Red Hat OpenShift Service Mesh Operator, then click Istio Service Mesh Control Plane.
  4. On the Istio Service Mesh Control Plane tab, click Create ServiceMeshControlPlane.
  5. Click YAML view. The version of the Service Mesh control plane determines the features available regardless of the version of the Operator.
  6. Modify the spec.mode field of the YAML file to specify ClusterWide.

    Example version 2.6 istio-installation.yaml

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      version: v2.6
      mode: ClusterWide

  7. Click Create. The Operator creates pods, services, and Service Mesh control plane components based on your configuration parameters. The operator also creates the ServiceMeshMemberRoll if it does not exist as part of the default configuration.

Verification

  • To verify that the control plane installed correctly:

    1. Click the Istio Service Mesh Control Plane tab.
    2. Click the name of the new ServiceMeshControlPlane object.
    3. Click the Resources tab to see the Red Hat OpenShift Service Mesh control plane resources that the Operator created and configured.

2.9.3.2. Configuring the control plane for cluster-wide deployment with the CLI

You can configure the ServiceMeshControlPlane resource for cluster-wide deployment using the CLI. In this example, istio-system is the name of the Service Mesh control plane namespace.

Prerequisites

  • The Red Hat OpenShift Service Mesh Operator is installed.
  • You have access to the OpenShift CLI (oc).
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Create a project named istio-system.

    $ oc new-project istio-system
  2. Create a ServiceMeshControlPlane file named istio-installation.yaml using the following example:

    Example version 2.6 istio-installation.yaml

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      version: v2.6
      mode: ClusterWide

  3. Run the following command to deploy the Service Mesh control plane:

    $ oc create -n istio-system -f <istio_installation.yaml>

    where:

    <istio_installation.yaml>
    Specifies the full path to your file.

Verification

  1. To monitor the progress of the pod deployment, run the following command:

    $ oc get pods -n istio-system -w

    You should see output similar to the following example:

    Example output

    NAME                                   READY   STATUS    RESTARTS   AGE
    grafana-b4d59bd7-mrgbr                 2/2     Running   0          65m
    istio-egressgateway-678dc97b4c-wrjkp   1/1     Running   0          108s
    istio-ingressgateway-b45c9d54d-4qg6n   1/1     Running   0          108s
    istiod-basic-55d78bbbcd-j5556          1/1     Running   0          108s
    jaeger-67c75bd6dc-jv6k6                2/2     Running   0          65m
    kiali-6476c7656c-x5msp                 1/1     Running   0          43m
    prometheus-58954b8d6b-m5std            2/2     Running   0          66m

2.9.3.3. Customizing the member roll for a cluster-wide mesh

In cluster-wide mode, when you create the ServiceMeshControlPlane resource, the ServiceMeshMemberRoll resource is also created. You can modify the ServiceMeshMemberRoll resource after it gets created. After you modify the resource, the Service Mesh operator no longer changes it. If you modify the ServiceMeshMemberRoll resource by using the OpenShift Container Platform web console, accept the prompt to overwrite the modifications.

Alternatively, you can create a ServiceMeshMemberRoll resource before deploying the ServiceMeshControlPlane resource. When you create the ServiceMeshControlPlane resource, the Service Mesh Operator will not modify the ServiceMeshMemberRoll.

Note

The ServiceMeshMemberRoll resource name must be named default and must be created in the same project namespace as the ServiceMeshControlPlane resource.

There are two ways to add a namespace to the mesh. You can either add the namespace by specifying its name in the spec.members list, or configure a set of namespace label selectors to include or exclude namespaces based on their labels.

Note

Regardless of how members are specified in the ServiceMeshMemberRoll resource, you can also add members to the mesh by creating the ServiceMeshMember resource in each namespace.

2.9.4. Validating your SMCP installation with Kiali

You can use the Kiali console to validate your Service Mesh installation. The Kiali console offers several ways to validate your Service Mesh components are deployed and configured properly.

  1. Prerequisites

    • The Red Hat OpenShift Service Mesh Operator must be installed.
    • Access to the OpenShift CLI (oc).
    • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. In the OpenShift Container Platform web console, navigate to Networking Routes.
  2. On the Routes page, select the Service Mesh control plane project, for example istio-system, from the Namespace menu.

    The Location column displays the linked address for each route.

  3. If necessary, use the filter to find the route for the Kiali console. Click the route Location to launch the console.
  4. Click Log In With OpenShift.

    When you first log in to the Kiali Console, you see the Overview page which displays all the namespaces in your service mesh that you have permission to view. When there are multiple namespaces shown on the Overview page, Kiali shows namespaces with health or validation problems first.

    Figure 2.1. Kiali Overview page

    Kiali Overview page showing istio-system

    The tile for each namespace displays the number of labels, the Istio Config health, the number of and Applications health, and Traffic for the namespace. If you are validating the console installation and namespaces have not yet been added to the mesh, there might not be any data to display other than istio-system.

  5. Kiali has four dashboards specifically for the namespace where the Service Mesh control plane is installed. To view these dashboards, click the Options menu kebab on the tile for the control plane namespace, for example, istio-system, and select one of the following options:

    • Istio Mesh Dashboard
    • Istio Control Plane Dashboard
    • Istio Performance Dashboard
    • Istio Wasm Exetension Dashboard

      Figure 2.2. Grafana Istio Control Plane Dashboard

      Istio Control Plane Dashboard showing data for bookinfo sample project

      Kiali also installs two additional Grafana dashboards, available from the Grafana Home page:

    • Istio Workload Dashboard
    • Istio Service Dashboard
  6. To view the Service Mesh control plane nodes, click the Graph page, select the Namespace where you installed the ServiceMeshControlPlane from the menu, for example istio-system.

    1. If necessary, click Display idle nodes.
    2. To learn more about the Graph page, click the Graph tour link.
    3. To view the mesh topology, select one or more additional namespaces from the Service Mesh Member Roll from the Namespace menu.
  7. To view the list of applications in the istio-system namespace, click the Applications page. Kiali displays the health of the applications.

    1. Hover your mouse over the information icon to view any additional information noted in the Details column.
  8. To view the list of workloads in the istio-system namespace, click the Workloads page. Kiali displays the health of the workloads.

    1. Hover your mouse over the information icon to view any additional information noted in the Details column.
  9. To view the list of services in the istio-system namespace, click the Services page. Kiali displays the health of the services and of the configurations.

    1. Hover your mouse over the information icon to view any additional information noted in the Details column.
  10. To view a list of the Istio Configuration objects in the istio-system namespace, click the Istio Config page. Kiali displays the health of the configuration.

    1. If there are configuration errors, click the row and Kiali opens the configuration file with the error highlighted.

2.9.5. Additional resources

Red Hat OpenShift Service Mesh supports multiple independent control planes within the cluster. You can create reusable configurations with ServiceMeshControlPlane profiles. For more information, see Creating control plane profiles.

2.9.6. Next steps

2.10. Adding services to a service mesh

A project contains services; however, the services are only available if you add the project to the service mesh.

2.10.1. About adding projects to a service mesh

After installing the Operators and creating the ServiceMeshControlPlane resource, add one or more projects to the service mesh.

Note

In OpenShift Container Platform, a project is essentially a Kubernetes namespace with additional annotations, such as the range of user IDs that can be used in the project. Typically, the OpenShift Container Platform web console uses the term project, and the CLI uses the term namespace, but the terms are essentially synonymous.

You can add projects to an existing service mesh using either the OpenShift Container Platform web console or the CLI. There are three methods to add a project to a service mesh:

  • Specifying the project name in the ServiceMeshMemberRoll resource.
  • Configuring label selectors in the spec.memberSelectors field of the ServiceMeshMemberRoll resource.
  • Creating the ServiceMeshMember resource in the project.

If you use the first method, then you must create the ServiceMeshMemberRoll resource.

2.10.2. Creating the Red Hat OpenShift Service Mesh member roll

The ServiceMeshMemberRoll lists the projects that belong to the Service Mesh control plane. Only projects listed in the ServiceMeshMemberRoll are affected by the control plane. A project does not belong to a service mesh until you add it to the member roll for a particular control plane deployment.

You must create a ServiceMeshMemberRoll resource named default in the same project as the ServiceMeshControlPlane, for example istio-system.

2.10.2.1. Creating the member roll from the web console

You can add one or more projects to the Service Mesh member roll from the web console. In this example, istio-system is the name of the Service Mesh control plane project.

Prerequisites

  • An installed, verified Red Hat OpenShift Service Mesh Operator.
  • List of existing projects to add to the service mesh.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. If you do not already have services for your mesh, or you are starting from scratch, create a project for your applications. It must be different from the project where you installed the Service Mesh control plane.

    1. Navigate to Home Projects.
    2. Enter a name in the Name field.
    3. Click Create.
  3. Navigate to Operators Installed Operators.
  4. Click the Project menu and choose the project where your ServiceMeshControlPlane resource is deployed from the list, for example istio-system.
  5. Click the Red Hat OpenShift Service Mesh Operator.
  6. Click the Istio Service Mesh Member Roll tab.
  7. Click Create ServiceMeshMemberRoll
  8. Click Members, then enter the name of your project in the Value field. You can add any number of projects, but a project can only belong to one ServiceMeshMemberRoll resource.
  9. Click Create.

2.10.2.2. Creating the member roll from the CLI

You can add a project to the ServiceMeshMemberRoll from the command line.

Prerequisites

  • An installed, verified Red Hat OpenShift Service Mesh Operator.
  • List of projects to add to the service mesh.
  • Access to the OpenShift CLI (oc).

Procedure

  1. Log in to the OpenShift Container Platform CLI.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. If you do not already have services for your mesh, or you are starting from scratch, create a project for your applications. It must be different from the project where you installed the Service Mesh control plane.

    $ oc new-project <your-project>
  3. To add your projects as members, modify the following example YAML. You can add any number of projects, but a project can only belong to one ServiceMeshMemberRoll resource. In this example, istio-system is the name of the Service Mesh control plane project.

    Example servicemeshmemberroll-default.yaml

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system
    spec:
      members:
        # a list of projects joined into the service mesh
        - your-project-name
        - another-project-name

  4. Run the following command to upload and create the ServiceMeshMemberRoll resource in the istio-system namespace.

    $ oc create -n istio-system -f servicemeshmemberroll-default.yaml
  5. Run the following command to verify the ServiceMeshMemberRoll was created successfully.

    $ oc get smmr -n istio-system default

    The installation has finished successfully when the STATUS column is Configured.

2.10.3. About adding projects using the ServiceMeshMemberRoll resource

Using the ServiceMeshMemberRoll resource is the simplest way to add a project to a service mesh. To add a project, specify the project name in the spec.members field of the ServiceMeshMemberRoll resource. The ServiceMeshMemberRoll resource specifies which projects are controlled by the ServiceMeshControlPlane resource.

Adding project using `ServiceMeshMemberRoll` resource image
Note

Adding projects using this method requires the user to have the update servicemeshmemberrolls and the update pods privileges in the project that is being added.

  • If you already have an application, workload, or service to add to the service mesh, see the following:

    • Adding or removing projects from the mesh using the ServiceMeshMemberRoll resource with the web console
    • Adding or removing projects from the mesh using the ServiceMeshMemberRoll resource with the CLI
  • Alternatively, to install a sample application called Bookinfo and add it to a ServiceMeshMemberRoll resource, see the Bookinfo example application tutorial.

2.10.3.1. Adding or removing projects from the mesh using the ServiceMeshMemberRoll resource with the web console

You can add or remove projects from the mesh using the ServiceMeshMemberRoll resource with the OpenShift Container Platform web console. You can add any number of projects, but a project can only belong to one mesh.

The ServiceMeshMemberRoll resource is deleted when its corresponding ServiceMeshControlPlane resource is deleted.

Prerequisites

  • An installed, verified Red Hat OpenShift Service Mesh Operator.
  • An existing ServiceMeshMemberRoll resource.
  • The name of the project with the ServiceMeshMemberRoll resource.
  • The names of the projects you want to add or remove from the mesh.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Project menu and choose the project where your ServiceMeshControlPlane resource is deployed from the list. For example istio-system.
  4. Click the Red Hat OpenShift Service Mesh Operator.
  5. Click the Istio Service Mesh Member Roll tab.
  6. Click the default link.
  7. Click the YAML tab.
  8. Modify the YAML to add projects as members (or delete them to remove existing members). You can add any number of projects, but a project can only belong to one ServiceMeshMemberRoll resource.

    Example servicemeshmemberroll-default.yaml

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system #control plane project
    spec:
      members:
        # a list of projects joined into the service mesh
        - your-project-name
        - another-project-name

  9. Click Save.
  10. Click Reload.

2.10.3.2. Adding or removing projects from the mesh using ServiceMeshMemberRoll resource with the CLI

You can add one or more projects to the mesh using the ServiceMeshMemberRoll resource with the CLI. You can add any number of projects, but a project can only belong to one mesh.

The ServiceMeshMemberRoll resource is deleted when its corresponding ServiceMeshControlPlane resource is deleted.

Prerequisites

  • An installed, verified Red Hat OpenShift Service Mesh Operator.
  • An existing ServiceMeshMemberRoll resource.
  • The name of the project with the ServiceMeshMemberRoll resource.
  • The names of the projects you want to add or remove from the mesh.
  • Access to the OpenShift CLI (oc).

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Edit the ServiceMeshMemberRoll resource.

    $ oc edit smmr -n <controlplane-namespace>
  3. Modify the YAML to add or remove projects as members. You can add any number of projects, but a project can only belong to one ServiceMeshMemberRoll resource.

    Example servicemeshmemberroll-default.yaml

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system #control plane project
    spec:
      members:
        # a list of projects joined into the service mesh
        - your-project-name
        - another-project-name

  4. Save the file and exit the editor.

2.10.4. About adding projects using the ServiceMeshMember resource

A ServiceMeshMember resource provides a way to add a project to a service mesh without modifying the ServiceMeshMemberRoll resource. To add a project, create a ServiceMeshMember resource in the project that you want to add to the service mesh. When the Service Mesh Operator processes the ServiceMeshMember object, the project appears in the status.members list of the ServiceMeshMemberRoll resource. Then, the services that reside in the project are made available to the mesh.

Adding project using `ServiceMeshMember` resource image

The mesh administrator must grant each mesh user permission to reference the ServiceMeshControlPlane resource in the ServiceMeshMember resource. With this permission in place, a mesh user can add a project to a mesh even when that user does not have direct access rights for the service mesh project or the ServiceMeshMemberRoll resource. For more information, see Creating the Red Hat OpenShift Service Mesh members.

2.10.4.1. Adding a project to the mesh using the ServiceMeshMember resource with the web console

You can add one or more projects to the mesh using the ServiceMeshMember resource with the OpenShift Container Platform web console.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You know the name of the ServiceMeshControlPlane resource and the name of the project that the resource belongs to.
  • You know the name of the project you want to add to the mesh.
  • A service mesh administrator must explicitly grant access to the service mesh. Administrators can grant users permissions to access the mesh by assigning them the mesh-user Role using a RoleBinding or ClusterRoleBinding. For more information, see Creating the Red Hat OpenShift Service Mesh members.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Navigate to Operators Installed Operators.
  3. Click the Project menu and choose the project that you want to add to the mesh from the drop-down list. For example, istio-system.
  4. Click the Red Hat OpenShift Service Mesh Operator.
  5. Click the Istio Service Mesh Member tab.
  6. Click Create ServiceMeshMember
  7. Accept the default name for the ServiceMeshMember.
  8. Click to expand ControlPlaneRef.
  9. In the Namespace field, select the project that the ServiceMeshControlPlane resource belongs to. For example, istio-system.
  10. In the Name field, enter the name of the ServiceMeshControlPlane resource that this namespace belongs to. For example, basic.
  11. Click Create.

Verification

  1. Confirm the ServiceMeshMember resource was created and that the project was added to the mesh by using the following steps:

    1. Click the resource name, for example, default.
    2. View the Conditions section shown at the end of the screen.
    3. Confirm that the Status of the Reconciled and Ready conditions is True.

      If the Status is False, see the Reason and Message columns for more information.

2.10.4.2. Adding a project to the mesh using the ServiceMeshMember resource with the CLI

You can add one or more projects to the mesh using the ServiceMeshMember resource with the CLI.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • You know the name of the ServiceMeshControlPlane resource and the name of the project it belongs to.
  • You know the name of the project you want to add to the mesh.
  • A service mesh administrator must explicitly grant access to the service mesh. Administrators can grant users permissions to access the mesh by assigning them the mesh-user Role using a RoleBinding or ClusterRoleBinding. For more information, see Creating the Red Hat OpenShift Service Mesh members.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Create the YAML file for the ServiceMeshMember manifest. The manifest adds the my-application project to the service mesh that was created by the ServiceMeshControlPlane resource deployed in the istio-system namespace:

    apiVersion: maistra.io/v1
    kind: ServiceMeshMember
    metadata:
      name: default
      namespace: my-application
    spec:
      controlPlaneRef:
        namespace: istio-system
        name: basic
  3. Apply the YAML file to create the ServiceMeshMember resource:

    $ oc apply -f <file-name>

Verification

  • Verify that the namespace is part of the mesh by running the following command. Confirm the that the value True appears in the READY column.

    $ oc get smm default -n my-application

    Example output

    NAME      CONTROL PLANE        READY   AGE
    default   istio-system/basic   True    2m11s

  • Alternatively, view the ServiceMeshMemberRoll resource to confirm that the my-application namespace is displayed in the status.members and status.configuredMembers fields of the ServiceMeshMemberRoll resource.

    $ oc describe smmr default -n istio-system

    Example output

    Name:         default
    Namespace:    istio-system
    Labels:       <none>
    # ...
    Status:
    # ...
      Configured Members:
        default
        my-application
    # ...
      Members:
        default
        my-application

2.10.5. About adding projects using label selectors

For cluster-wide deployments, you can use label selectors to add projects to the mesh. Label selectors specified in the ServiceMeshMemberRoll resource enable the Service Mesh Operator to add or remove namespaces to or from the mesh based on namespace labels. Unlike other standard OpenShift Container Platform resources that you can use to specify a single label selector, you can use the ServiceMeshMemberRoll resource to specify multiple label selectors.

Adding project using label selector image

If the labels for a namespace match any of the selectors specified in the ServiceMeshMemberRoll resource, then the namespace is included in the mesh.

Note

In OpenShift Container Platform, a project is essentially a Kubernetes namespace with additional annotations, such as the range of user IDs that can be used in the project. Typically, the OpenShift Container Platform web console uses the term project, and the CLI uses the term namespace, but the terms are essentially synonymous.

2.10.5.1. Adding a project to the mesh using label selectors with the web console

You can use labels selectors to add a project to the Service Mesh with the OpenShift Container Platform web console.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • The deployment has an existing ServiceMeshMemberRoll resource.
  • You are logged in to the OpenShift Container Platform web console as cluster-admin.

Procedure

  1. Navigate to Operators Installed Operators.
  2. Click the Project menu, and from the drop-down list, select the project where your ServiceMeshMemberRoll resource is deployed. For example, istio-system.
  3. Click the Red Hat OpenShift Service Mesh Operator.
  4. Click the Istio Service Mesh Member Roll tab.
  5. Click Create ServiceMeshMember Roll.
  6. Accept the default name for the ServiceMeshMemberRoll.
  7. In the Labels field, enter key-value pairs to define the labels that identify which namespaces to include in the service mesh. If a project namespace has either label specified by the selectors, then the project namespace is included in the service mesh. You do not need to include both labels.

    For example, entering mykey=myvalue includes all namespaces with this label as part of the mesh. When the selector identifies a match, the project namespace is added to the service mesh.

    Entering myotherkey=myothervalue includes all namespaces with this label as part of the mesh. When the selector identifies a match, the project namespace is added to the service mesh.

  8. Click Create.

2.10.5.2. Adding a project to the mesh using label selectors with the CLI

You can use label selectors to add a project to the Service Mesh with the CLI.

Prerequisites

  • You have installed the Red Hat OpenShift Service Mesh Operator.
  • The deployment has an existing ServiceMeshMemberRoll resource.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Edit the ServiceMeshMemberRoll resource.

    $ oc edit smmr default -n istio-system

    You can deploy the Service Mesh control plane to any project provided that it is separate from the project that contains your services.

  3. Modify the YAML file to include namespace label selectors in the spec.memberSelectors field of the ServiceMeshMemberRoll resource.

    Note

    Instead of using the matchLabels field, you can also use the matchExpressions field in the selector.

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system
    spec:
      memberSelectors: 1
      - matchLabels: 2
          mykey: myvalue 3
      - matchLabels: 4
          myotherkey: myothervalue 5
    1
    Contains the label selectors used to identify which project namespaces are included in the service mesh. If a project namespace has either label specified by the selectors, then the project namespace is included in the service mesh. The project namespace does not need both labels to be included.
    2 3
    Specifies all namespaces with the mykey=myvalue label. When the selector identifies a match, the project namespace is added to the service mesh.
    4 5
    Specifies all namespaces with the myotherkey=myothervalue label. When the selector identifies a match, the project namespace is added to the service mesh.

2.10.6. Bookinfo example application

The Bookinfo example application allows you to test your Red Hat OpenShift Service Mesh 2.6.4 installation on OpenShift Container Platform.

The Bookinfo application displays information about a book, similar to a single catalog entry of an online book store. The application displays a page that describes the book, book details (ISBN, number of pages, and other information), and book reviews.

The Bookinfo application consists of these microservices:

  • The productpage microservice calls the details and reviews microservices to populate the page.
  • The details microservice contains book information.
  • The reviews microservice contains book reviews. It also calls the ratings microservice.
  • The ratings microservice contains book ranking information that accompanies a book review.

There are three versions of the reviews microservice:

  • Version v1 does not call the ratings Service.
  • Version v2 calls the ratings Service and displays each rating as one to five black stars.
  • Version v3 calls the ratings Service and displays each rating as one to five red stars.

2.10.6.1. Installing the Bookinfo application

This tutorial walks you through how to create a sample application by creating a project, deploying the Bookinfo application to that project, and viewing the running application in Service Mesh.

Prerequisites

  • OpenShift Container Platform 4.1 or higher installed.
  • Red Hat OpenShift Service Mesh 2.6.4 installed.
  • Access to the OpenShift CLI (oc).
  • You are logged in to OpenShift Container Platform as`cluster-admin`.
Note

The Bookinfo sample application cannot be installed on IBM Z® and IBM Power®.

Note

The commands in this section assume the Service Mesh control plane project is istio-system. If you installed the control plane in another namespace, edit each command before you run it.

Procedure

  1. Click Home Projects.
  2. Click Create Project.
  3. Enter bookinfo as the Project Name, enter a Display Name, and enter a Description, then click Create.

    • Alternatively, you can run this command from the CLI to create the bookinfo project.

      $ oc new-project bookinfo
  4. Click Operators Installed Operators.
  5. Click the Project menu and use the Service Mesh control plane namespace. In this example, use istio-system.
  6. Click the Red Hat OpenShift Service Mesh Operator.
  7. Click the Istio Service Mesh Member Roll tab.

    1. If you have already created a Istio Service Mesh Member Roll, click the name, then click the YAML tab to open the YAML editor.
    2. If you have not created a ServiceMeshMemberRoll, click Create ServiceMeshMemberRoll.
  8. Click Members, then enter the name of your project in the Value field.
  9. Click Create to save the updated Service Mesh Member Roll.

    1. Or, save the following example to a YAML file.

      Bookinfo ServiceMeshMemberRoll example servicemeshmemberroll-default.yaml

      apiVersion: maistra.io/v1
      kind: ServiceMeshMemberRoll
      metadata:
        name: default
      spec:
        members:
        - bookinfo

    2. Run the following command to upload that file and create the ServiceMeshMemberRoll resource in the istio-system namespace. In this example, istio-system is the name of the Service Mesh control plane project.

      $ oc create -n istio-system -f servicemeshmemberroll-default.yaml
  10. Run the following command to verify the ServiceMeshMemberRoll was created successfully.

    $ oc get smmr -n istio-system -o wide

    The installation has finished successfully when the STATUS column is Configured.

    NAME      READY   STATUS       AGE   MEMBERS
    default   1/1     Configured   70s   ["bookinfo"]
  11. From the CLI, deploy the Bookinfo application in the `bookinfo` project by applying the bookinfo.yaml file:

    $ oc apply -n bookinfo -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/platform/kube/bookinfo.yaml

    You should see output similar to the following:

    service/details created
    serviceaccount/bookinfo-details created
    deployment.apps/details-v1 created
    service/ratings created
    serviceaccount/bookinfo-ratings created
    deployment.apps/ratings-v1 created
    service/reviews created
    serviceaccount/bookinfo-reviews created
    deployment.apps/reviews-v1 created
    deployment.apps/reviews-v2 created
    deployment.apps/reviews-v3 created
    service/productpage created
    serviceaccount/bookinfo-productpage created
    deployment.apps/productpage-v1 created
  12. Create the ingress gateway by applying the bookinfo-gateway.yaml file:

    $ oc apply -n bookinfo -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/networking/bookinfo-gateway.yaml

    You should see output similar to the following:

    gateway.networking.istio.io/bookinfo-gateway created
    virtualservice.networking.istio.io/bookinfo created
  13. Set the value for the GATEWAY_URL parameter:

    $ export GATEWAY_URL=$(oc -n istio-system get route istio-ingressgateway -o jsonpath='{.spec.host}')

2.10.6.2. Adding default destination rules

Before you can use the Bookinfo application, you must first add default destination rules. There are two preconfigured YAML files, depending on whether or not you enabled mutual transport layer security (TLS) authentication.

Procedure

  1. To add destination rules, run one of the following commands:

    • If you did not enable mutual TLS:

      $ oc apply -n bookinfo -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/networking/destination-rule-all.yaml
    • If you enabled mutual TLS:

      $ oc apply -n bookinfo -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/networking/destination-rule-all-mtls.yaml

      You should see output similar to the following:

      destinationrule.networking.istio.io/productpage created
      destinationrule.networking.istio.io/reviews created
      destinationrule.networking.istio.io/ratings created
      destinationrule.networking.istio.io/details created

2.10.6.3. Verifying the Bookinfo installation

To confirm that the sample Bookinfo application was successfully deployed, perform the following steps.

Prerequisites

  • Red Hat OpenShift Service Mesh installed.
  • Complete the steps for installing the Bookinfo sample app.
  • You are logged in to OpenShift Container Platform as`cluster-admin`.

Procedure from CLI

  1. Verify that all pods are ready with this command:

    $ oc get pods -n bookinfo

    All pods should have a status of Running. You should see output similar to the following:

    NAME                              READY   STATUS    RESTARTS   AGE
    details-v1-55b869668-jh7hb        2/2     Running   0          12m
    productpage-v1-6fc77ff794-nsl8r   2/2     Running   0          12m
    ratings-v1-7d7d8d8b56-55scn       2/2     Running   0          12m
    reviews-v1-868597db96-bdxgq       2/2     Running   0          12m
    reviews-v2-5b64f47978-cvssp       2/2     Running   0          12m
    reviews-v3-6dfd49b55b-vcwpf       2/2     Running   0          12m
  2. Run the following command to retrieve the URL for the product page:

    echo "http://$GATEWAY_URL/productpage"
  3. Copy and paste the output in a web browser to verify the Bookinfo product page is deployed.

Procedure from Kiali web console

  1. Obtain the address for the Kiali web console.

    1. Log in to the OpenShift Container Platform web console.
    2. Navigate to Networking Routes.
    3. On the Routes page, select the Service Mesh control plane project, for example istio-system, from the Namespace menu.

      The Location column displays the linked address for each route.

    4. Click the link in the Location column for Kiali.
    5. Click Log In With OpenShift. The Kiali Overview screen presents tiles for each project namespace.
  2. In Kiali, click Graph.
  3. Select bookinfo from the Namespace list, and App graph from the Graph Type list.
  4. Click Display idle nodes from the Display menu.

    This displays nodes that are defined but have not received or sent requests. It can confirm that an application is properly defined, but that no request traffic has been reported.

    Kiali displaying bookinfo application
    • Use the Duration menu to increase the time period to help ensure older traffic is captured.
    • Use the Refresh Rate menu to refresh traffic more or less often, or not at all.
  5. Click Services, Workloads or Istio Config to see list views of bookinfo components, and confirm that they are healthy.

2.10.6.4. Removing the Bookinfo application

Follow these steps to remove the Bookinfo application.

Prerequisites

  • OpenShift Container Platform 4.1 or higher installed.
  • Red Hat OpenShift Service Mesh 2.6.4 installed.
  • Access to the OpenShift CLI (oc).
2.10.6.4.1. Delete the Bookinfo project

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Click to Home Projects.
  3. Click the bookinfo menu kebab , and then click Delete Project.
  4. Type bookinfo in the confirmation dialog box, and then click Delete.

    • Alternatively, you can run this command using the CLI to create the bookinfo project.

      $ oc delete project bookinfo
2.10.6.4.2. Remove the Bookinfo project from the Service Mesh member roll

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Click Operators Installed Operators.
  3. Click the Project menu and choose istio-system from the list.
  4. Click the Istio Service Mesh Member Roll link under Provided APIS for the Red Hat OpenShift Service Mesh Operator.
  5. Click the ServiceMeshMemberRoll menu kebab and select Edit Service Mesh Member Roll.
  6. Edit the default Service Mesh Member Roll YAML and remove bookinfo from the members list.

    • Alternatively, you can run this command using the CLI to remove the bookinfo project from the ServiceMeshMemberRoll. In this example, istio-system is the name of the Service Mesh control plane project.

      $ oc -n istio-system patch --type='json' smmr default -p '[{"op": "remove", "path": "/spec/members", "value":["'"bookinfo"'"]}]'
  7. Click Save to update Service Mesh Member Roll.

2.10.7. Next steps

2.11. Enabling sidecar injection

After adding the namespaces that contain your services to your mesh, the next step is to enable automatic sidecar injection in the Deployment resource for your application. You must enable automatic sidecar injection for each deployment.

If you have installed the Bookinfo sample application, the application was deployed and the sidecars were injected as part of the installation procedure. If you are using your own project and service, deploy your applications on OpenShift Container Platform.

For more information, see the OpenShift Container Platform documentation, Understanding deployments.

Note

Traffic started by Init Containers, specialized containers that run before the application containers in a pod, cannot travel outside of the service mesh by default. Any action Init Containers perform that requires establishing a network traffic connection outside of the mesh fails.

For more information about connecting Init Containers to a service, see the Red Hat Knowledgebase solution initContainer in CrashLoopBackOff on pod with Service Mesh sidecar injected

2.11.1. Prerequisites

2.11.2. Enabling automatic sidecar injection

When deploying an application, you must opt-in to injection by configuring the label sidecar.istio.io/inject in spec.template.metadata.labels to true in the deployment object. Opting in ensures that the sidecar injection does not interfere with other OpenShift Container Platform features such as builder pods used by numerous frameworks within the OpenShift Container Platform ecosystem.

Prerequisites

  • Identify the namespaces that are part of your service mesh and the deployments that need automatic sidecar injection.

Procedure

  1. To find your deployments use the oc get command.

    $ oc get deployment -n <namespace>

    For example, to view the Deployment YAML file for the 'ratings-v1' microservice in the bookinfo namespace, use the following command to see the resource in YAML format.

    oc get deployment -n bookinfo ratings-v1 -o yaml
  2. Open the application’s Deployment YAML file in an editor.
  3. Add spec.template.metadata.labels.sidecar.istio/inject to your Deployment YAML file and set sidecar.istio.io/inject to true as shown in the following example.

    Example snippet from bookinfo deployment-ratings-v1.yaml

    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: ratings-v1
      namespace: bookinfo
      labels:
        app: ratings
        version: v1
    spec:
      template:
        metadata:
          labels:
            sidecar.istio.io/inject: 'true'

    Note

    Using the annotations parameter when enabling automatic sidecar injection is deprecated and is replaced by using the labels parameter.

  4. Save the Deployment YAML file.
  5. Add the file back to the project that contains your app.

    $ oc apply -n <namespace> -f deployment.yaml

    In this example, bookinfo is the name of the project that contains the ratings-v1 app and deployment-ratings-v1.yaml is the file you edited.

    $ oc apply -n bookinfo -f deployment-ratings-v1.yaml
  6. To verify that the resource uploaded successfully, run the following command.

    $ oc get deployment -n <namespace> <deploymentName> -o yaml

    For example,

    $ oc get deployment -n bookinfo ratings-v1 -o yaml

2.11.3. Validating sidecar injection

The Kiali console offers several ways to validate whether or not your applications, services, and workloads have a sidecar proxy.

Figure 2.3. Missing sidecar badge

Missing Sidecar badge

The Graph page displays a node badge indicating a Missing Sidecar on the following graphs:

  • App graph
  • Versioned app graph
  • Workload graph

Figure 2.4. Missing sidecar icon

Missing Sidecar icon

The Applications page displays a Missing Sidecar icon in the Details column for any applications in a namespace that do not have a sidecar.

The Workloads page displays a Missing Sidecar icon in the Details column for any applications in a namespace that do not have a sidecar.

The Services page displays a Missing Sidecar icon in the Details column for any applications in a namespace that do not have a sidecar. When there are multiple versions of a service, you use the Service Details page to view Missing Sidecar icons.

The Workload Details page has a special unified Logs tab that lets you view and correlate application and proxy logs. You can view the Envoy logs as another way to validate sidecar injection for your application workloads.

The Workload Details page also has an Envoy tab for any workload that is an Envoy proxy or has been injected with an Envoy proxy. This tab displays a built-in Envoy dashboard that includes subtabs for Clusters, Listeners, Routes, Bootstrap, Config, and Metrics.

For information about enabling Envoy access logs, see the Troubleshooting section.

For information about viewing Envoy logs, see Viewing logs in the Kiali console

2.11.4. Setting proxy environment variables through annotations

Configuration for the Envoy sidecar proxies is managed by the ServiceMeshControlPlane.

You can set environment variables for the sidecar proxy for applications by adding pod annotations to the deployment in the injection-template.yaml file. The environment variables are injected to the sidecar.

Example injection-template.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: resource
spec:
  replicas: 7
  selector:
    matchLabels:
      app: resource
  template:
    metadata:
      annotations:
        sidecar.maistra.io/proxyEnv: "{ \"maistra_test_env\": \"env_value\", \"maistra_test_env_2\": \"env_value_2\" }"

Warning

You should never include maistra.io/ labels and annotations when creating your own custom resources. These labels and annotations indicate that the resources are generated and managed by the Operator. If you are copying content from an Operator-generated resource when creating your own resources, do not include labels or annotations that start with maistra.io/. Resources that include these labels or annotations will be overwritten or deleted by the Operator during the next reconciliation.

2.11.5. Updating sidecar proxies

In order to update the configuration for sidecar proxies the application administrator must restart the application pods.

If your deployment uses automatic sidecar injection, you can update the pod template in the deployment by adding or modifying an annotation. Run the following command to redeploy the pods:

$ oc patch deployment/<deployment> -p '{"spec":{"template":{"metadata":{"annotations":{"kubectl.kubernetes.io/restartedAt": "'`date -Iseconds`'"}}}}}'

If your deployment does not use automatic sidecar injection, you must manually update the sidecars by modifying the sidecar container image specified in the deployment or pod, and then restart the pods.

2.11.6. Next steps

Configure Red Hat OpenShift Service Mesh features for your environment.

2.12. Managing users and profiles

2.12.1. Creating the Red Hat OpenShift Service Mesh members

ServiceMeshMember resources provide a way for Red Hat OpenShift Service Mesh administrators to delegate permissions to add projects to a service mesh, even when the respective users do not have direct access to the service mesh project or member roll. While project administrators are automatically given permission to create the ServiceMeshMember resource in their project, they cannot point it to any ServiceMeshControlPlane until the service mesh administrator explicitly grants access to the service mesh. Administrators can grant users permissions to access the mesh by granting them the mesh-user user role. In this example, istio-system is the name of the Service Mesh control plane project.

$ oc policy add-role-to-user -n istio-system --role-namespace istio-system mesh-user <user_name>

Administrators can modify the mesh-user role binding in the Service Mesh control plane project to specify the users and groups that are granted access. The ServiceMeshMember adds the project to the ServiceMeshMemberRoll within the Service Mesh control plane project that it references.

apiVersion: maistra.io/v1
kind: ServiceMeshMember
metadata:
  name: default
spec:
  controlPlaneRef:
    namespace: istio-system
    name: basic

The mesh-users role binding is created automatically after the administrator creates the ServiceMeshControlPlane resource. An administrator can use the following command to add a role to a user.

$ oc policy add-role-to-user

The administrator can also create the mesh-user role binding before the administrator creates the ServiceMeshControlPlane resource. For example, the administrator can create it in the same oc apply operation as the ServiceMeshControlPlane resource.

This example adds a role binding for alice:

apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  namespace: istio-system
  name: mesh-users
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: mesh-user
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: User
  name: alice

2.12.2. Creating Service Mesh control plane profiles

You can create reusable configurations with ServiceMeshControlPlane profiles. Individual users can extend the profiles they create with their own configurations. Profiles can also inherit configuration information from other profiles. For example, you can create an accounting control plane for the accounting team and a marketing control plane for the marketing team. If you create a development template and a production template, members of the marketing team and the accounting team can extend the development and production profiles with team-specific customization.

When you configure Service Mesh control plane profiles, which follow the same syntax as the ServiceMeshControlPlane, users inherit settings in a hierarchical fashion. The Operator is delivered with a default profile with default settings for Red Hat OpenShift Service Mesh.

2.12.2.1. Creating the ConfigMap

To add custom profiles, you must create a ConfigMap named smcp-templates in the openshift-operators project. The Operator container automatically mounts the ConfigMap.

Prerequisites

  • An installed, verified Service Mesh Operator.
  • An account with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  • Location of the Operator deployment.
  • Access to the OpenShift CLI (oc).

Procedure

  1. Log in to the OpenShift Container Platform CLI as a cluster-admin. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  2. From the CLI, run this command to create the ConfigMap named smcp-templates in the openshift-operators project and replace <profiles-directory> with the location of the ServiceMeshControlPlane files on your local disk:

    $ oc create configmap --from-file=<profiles-directory> smcp-templates -n openshift-operators
  3. You can use the profiles parameter in the ServiceMeshControlPlane to specify one or more templates.

      apiVersion: maistra.io/v2
      kind: ServiceMeshControlPlane
      metadata:
        name: basic
      spec:
        profiles:
        - default

2.12.2.2. Setting the correct network policy

Service Mesh creates network policies in the Service Mesh control plane and member namespaces to allow traffic between them. Before you deploy, consider the following conditions to ensure the services in your service mesh that were previously exposed through an OpenShift Container Platform route.

  • Traffic into the service mesh must always go through the ingress-gateway for Istio to work properly.
  • Deploy services external to the service mesh in separate namespaces that are not in any service mesh.
  • Non-mesh services that need to be deployed within a service mesh enlisted namespace should label their deployments maistra.io/expose-route: "true", which ensures OpenShift Container Platform routes to these services still work.

2.13. Security

If your service mesh application is constructed with a complex array of microservices, you can use Red Hat OpenShift Service Mesh to customize the security of the communication between those services. The infrastructure of OpenShift Container Platform along with the traffic management features of Service Mesh help you manage the complexity of your applications and secure microservices.

Before you begin

If you have a project, add your project to the ServiceMeshMemberRoll resource.

If you don’t have a project, install the Bookinfo sample application and add it to the ServiceMeshMemberRoll resource. The sample application helps illustrate security concepts.

2.13.1. About mutual Transport Layer Security (mTLS)

Mutual Transport Layer Security (mTLS) is a protocol that enables two parties to authenticate each other. It is the default mode of authentication in some protocols (IKE, SSH) and optional in others (TLS). You can use mTLS without changes to the application or service code. The TLS is handled entirely by the service mesh infrastructure and between the two sidecar proxies.

By default, mTLS in Red Hat OpenShift Service Mesh is enabled and set to permissive mode, where the sidecars in Service Mesh accept both plain-text traffic and connections that are encrypted using mTLS. If a service in your mesh configured to use strict mTLS is communicating with a service outside the mesh, communication might break between those services because strict mTLS requires both the client and the server to be able to verify the identify of each other. Use permissive mode while you migrate your workloads to Service Mesh. Then, you can enable strict mTLS across your mesh, namespace, or application.

Enabling mTLS across your mesh at the Service Mesh control plane level secures all the traffic in your service mesh without rewriting your applications and workloads. You can secure namespaces in your mesh at the data plane level in the ServiceMeshControlPlane resource. To customize traffic encryption connections, configure namespaces at the application level with PeerAuthentication and DestinationRule resources.

2.13.1.1. Enabling strict mTLS across the service mesh

If your workloads do not communicate with outside services, you can quickly enable mTLS across your mesh without communication interruptions. You can enable it by setting spec.security.dataPlane.mtls to true in the ServiceMeshControlPlane resource. The Operator creates the required resources.

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
spec:
  version: v2.6
  security:
    dataPlane:
      mtls: true

You can also enable mTLS by using the OpenShift Container Platform web console.

Procedure

  1. Log in to the web console.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Click Operators Installed Operators.
  4. Click Service Mesh Control Plane under Provided APIs.
  5. Click the name of your ServiceMeshControlPlane resource, for example, basic.
  6. On the Details page, click the toggle in the Security section for Data Plane Security.
2.13.1.1.1. Configuring sidecars for incoming connections for specific services

You can also configure mTLS for individual services by creating a policy.

Procedure

  1. Create a YAML file using the following example.

    PeerAuthentication Policy example policy.yaml

    apiVersion: security.istio.io/v1beta1
    kind: PeerAuthentication
    metadata:
      name: default
      namespace: <namespace>
    spec:
      mtls:
        mode: STRICT

    1. Replace <namespace> with the namespace where the service is located.
  2. Run the following command to create the resource in the namespace where the service is located. It must match the namespace field in the Policy resource you just created.

    $ oc create -n <namespace> -f <policy.yaml>
Note

If you are not using automatic mTLS and you are setting PeerAuthentication to STRICT, you must create a DestinationRule resource for your service.

2.13.1.1.2. Configuring sidecars for outgoing connections

Create a destination rule to configure Service Mesh to use mTLS when sending requests to other services in the mesh.

Procedure

  1. Create a YAML file using the following example.

    DestinationRule example destination-rule.yaml

    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: default
      namespace: <namespace>
    spec:
      host: "*.<namespace>.svc.cluster.local"
      trafficPolicy:
       tls:
        mode: ISTIO_MUTUAL

    1. Replace <namespace> with the namespace where the service is located.
  2. Run the following command to create the resource in the namespace where the service is located. It must match the namespace field in the DestinationRule resource you just created.

    $ oc create -n <namespace> -f <destination-rule.yaml>
2.13.1.1.3. Setting the minimum and maximum protocol versions

If your environment has specific requirements for encrypted traffic in your service mesh, you can control the cryptographic functions that are allowed by setting the spec.security.controlPlane.tls.minProtocolVersion or spec.security.controlPlane.tls.maxProtocolVersion in your ServiceMeshControlPlane resource. Those values, configured in your Service Mesh control plane resource, define the minimum and maximum TLS version used by mesh components when communicating securely over TLS.

The default is TLS_AUTO and does not specify a version of TLS.

Table 2.5. Valid values
ValueDescription

TLS_AUTO

default

TLSv1_0

TLS version 1.0

TLSv1_1

TLS version 1.1

TLSv1_2

TLS version 1.2

TLSv1_3

TLS version 1.3

Procedure

  1. Log in to the web console.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Click Operators Installed Operators.
  4. Click Service Mesh Control Plane under Provided APIs.
  5. Click the name of your ServiceMeshControlPlane resource, for example, basic.
  6. Click the YAML tab.
  7. Insert the following code snippet in the YAML editor. Replace the value in the minProtocolVersion with the TLS version value. In this example, the minimum TLS version is set to TLSv1_2.

    ServiceMeshControlPlane snippet

    kind: ServiceMeshControlPlane
    spec:
      security:
        controlPlane:
          tls:
            minProtocolVersion: TLSv1_2

  8. Click Save.
  9. Click Refresh to verify that the changes updated correctly.

2.13.1.2. Validating encryption with Kiali

The Kiali console offers several ways to validate whether or not your applications, services, and workloads have mTLS encryption enabled.

Figure 2.5. Masthead icon mesh-wide mTLS enabled

mTLS enabled

At the right side of the masthead, Kiali shows a lock icon when the mesh has strictly enabled mTLS for the whole service mesh. It means that all communications in the mesh use mTLS.

Figure 2.6. Masthead icon mesh-wide mTLS partially enabled

mTLS partially enabled

Kiali displays a hollow lock icon when either the mesh is configured in PERMISSIVE mode or there is a error in the mesh-wide mTLS configuration.

Figure 2.7. Security badge

Security badge

The Graph page has the option to display a Security badge on the graph edges to indicate that mTLS is enabled. To enable security badges on the graph, from the Display menu, under Show Badges, select the Security checkbox. When an edge shows a lock icon, it means at least one request with mTLS enabled is present. In case there are both mTLS and non-mTLS requests, the side-panel will show the percentage of requests that use mTLS.

The Applications Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present.

The Workloads Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present.

The Services Detail Overview page displays a Security icon on the graph edges where at least one request with mTLS enabled is present. Also note that Kiali displays a lock icon in the Network section next to ports that are configured for mTLS.

2.13.2. Configuring Role Based Access Control (RBAC)

Role-based access control (RBAC) objects determine whether a user or service is allowed to perform a given action within a project. You can define mesh-, namespace-, and workload-wide access control for your workloads in the mesh.

To configure RBAC, create an AuthorizationPolicy resource in the namespace for which you are configuring access. If you are configuring mesh-wide access, use the project where you installed the Service Mesh control plane, for example istio-system.

For example, with RBAC, you can create policies that:

  • Configure intra-project communication.
  • Allow or deny full access to all workloads in the default namespace.
  • Allow or deny ingress gateway access.
  • Require a token for access.

An authorization policy includes a selector, an action, and a list of rules:

  • The selector field specifies the target of the policy.
  • The action field specifies whether to allow or deny the request.
  • The rules field specifies when to trigger the action.

    • The from field specifies constraints on the request origin.
    • The to field specifies constraints on request target and parameters.
    • The when field specifies additional conditions that to apply the rule.

Procedure

  1. Create your AuthorizationPolicy resource. The following example shows a resource that updates the ingress-policy AuthorizationPolicy to deny an IP address from accessing the ingress gateway.

    apiVersion: security.istio.io/v1beta1
    kind: AuthorizationPolicy
    metadata:
      name: ingress-policy
      namespace: istio-system
    spec:
      selector:
        matchLabels:
          app: istio-ingressgateway
      action: DENY
      rules:
      - from:
        - source:
            ipBlocks: ["1.2.3.4"]
  2. Run the following command after you write your resource to create your resource in your namespace. The namespace must match your metadata.namespace field in your AuthorizationPolicy resource.

    $ oc create -n istio-system -f <filename>

Next steps

Consider the following examples for other common configurations.

2.13.2.1. Configure intra-project communication

You can use AuthorizationPolicy to configure your Service Mesh control plane to allow or deny the traffic communicating with your mesh or services in your mesh.

2.13.2.1.1. Restrict access to services outside a namespace

You can deny requests from any source that is not in the bookinfo namespace with the following AuthorizationPolicy resource example.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
 name: httpbin-deny
 namespace: bookinfo
spec:
 selector:
   matchLabels:
     app: httpbin
     version: v1
 action: DENY
 rules:
 - from:
   - source:
       notNamespaces: ["bookinfo"]
2.13.2.1.2. Creating allow-all and default deny-all authorization policies

The following example shows an allow-all authorization policy that allows full access to all workloads in the bookinfo namespace.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: allow-all
  namespace: bookinfo
spec:
  action: ALLOW
  rules:
  - {}

The following example shows a policy that denies any access to all workloads in the bookinfo namespace.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: deny-all
  namespace: bookinfo
spec:
  {}

2.13.2.2. Allow or deny access to the ingress gateway

You can set an authorization policy to add allow or deny lists based on IP addresses.

apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: ingress-policy
  namespace: istio-system
spec:
  selector:
    matchLabels:
      app: istio-ingressgateway
  action: ALLOW
  rules:
  - from:
    - source:
       ipBlocks: ["1.2.3.4", "5.6.7.0/24"]

2.13.2.3. Restrict access with JSON Web Token

You can restrict what can access your mesh with a JSON Web Token (JWT). After authentication, a user or service can access routes, services that are associated with that token.

Create a RequestAuthentication resource, which defines the authentication methods that are supported by a workload. The following example accepts a JWT issued by http://localhost:8080/auth/realms/master.

apiVersion: "security.istio.io/v1beta1"
kind: "RequestAuthentication"
metadata:
  name: "jwt-example"
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: httpbin
  jwtRules:
  - issuer: "http://localhost:8080/auth/realms/master"
    jwksUri: "http://keycloak.default.svc:8080/auth/realms/master/protocol/openid-connect/certs"

Then, create an AuthorizationPolicy resource in the same namespace to work with RequestAuthentication resource you created. The following example requires a JWT to be present in the Authorization header when sending a request to httpbin workloads.

apiVersion: "security.istio.io/v1beta1"
kind: "AuthorizationPolicy"
metadata:
  name: "frontend-ingress"
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: httpbin
  action: DENY
  rules:
  - from:
    - source:
        notRequestPrincipals: ["*"]

2.13.3. Configuring cipher suites and ECDH curves

Cipher suites and Elliptic-curve Diffie–Hellman (ECDH curves) can help you secure your service mesh. You can define a comma separated list of cipher suites using spec.security.controlplane.tls.cipherSuites and ECDH curves using spec.security.controlplane.tls.ecdhCurves in your ServiceMeshControlPlane resource. If either of these attributes are empty, then the default values are used.

The cipherSuites setting is effective if your service mesh uses TLS 1.2 or earlier. It has no effect when negotiating with TLS 1.3.

Set your cipher suites in the comma separated list in order of priority. For example, ecdhCurves: CurveP256, CurveP384 sets CurveP256 as a higher priority than CurveP384.

Note

You must include either TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 or TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 when you configure the cipher suite. HTTP/2 support requires at least one of these cipher suites.

The supported cipher suites are:

  • TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
  • TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA

The supported ECDH Curves are:

  • CurveP256
  • CurveP384
  • CurveP521
  • X25519

2.13.4. Configuring JSON Web Key Sets resolver certificate authority

You can configure your own JSON Web Key Sets (JWKS) resolver certificate authority (CA) from the ServiceMeshControlPlane (SMCP) spec.

Procedure

  1. Edit the ServiceMeshControlPlane spec file:

    $ oc edit smcp <smcp-name>
  2. Enable mtls for the data plane by setting the value of the mtls field to true in the ServiceMeshControlPlane spec, as shown in the following example:

    spec:
      security:
        dataPlane:
            mtls: true # enable mtls for data plane
        # JWKSResolver extra CA
        # PEM-encoded certificate content to trust an additional CA
        jwksResolverCA: |
            -----BEGIN CERTIFICATE-----
            [...]
            [...]
            -----END CERTIFICATE-----
    ...
  3. Save the changes. OpenShift Container Platform automatically applies them.

A ConfigMap such as pilot-jwks-cacerts-<SMCP name> is created with the CA .pem data.

Example ConfigMap pilot-jwks-cacerts-<SMCP name>

kind: ConfigMap
apiVersion: v1
data:
  extra.pem: |
      -----BEGIN CERTIFICATE-----
      [...]
      [...]
      -----END CERTIFICATE-----

2.13.5. Adding an external certificate authority key and certificate

By default, Red Hat OpenShift Service Mesh generates a self-signed root certificate and key and uses them to sign the workload certificates. You can also use the user-defined certificate and key to sign workload certificates with user-defined root certificate. This task demonstrates an example to plug certificates and key into Service Mesh.

Prerequisites

  • Install Red Hat OpenShift Service Mesh with mutual TLS enabled to configure certificates.
  • This example uses the certificates from the Maistra repository. For production, use your own certificates from your certificate authority.
  • Deploy the Bookinfo sample application to verify the results with these instructions.
  • OpenSSL is required to verify certificates.

2.13.5.1. Adding an existing certificate and key

To use an existing signing (CA) certificate and key, you must create a chain of trust file that includes the CA certificate, key, and root certificate. You must use the following exact file names for each of the corresponding certificates. The CA certificate is named ca-cert.pem, the key is ca-key.pem, and the root certificate, which signs ca-cert.pem, is named root-cert.pem. If your workload uses intermediate certificates, you must specify them in a cert-chain.pem file.

  1. Save the example certificates from the Maistra repository locally and replace <path> with the path to your certificates.
  2. Create a secret named cacert that includes the input files ca-cert.pem, ca-key.pem, root-cert.pem and cert-chain.pem.

    $ oc create secret generic cacerts -n istio-system --from-file=<path>/ca-cert.pem \
        --from-file=<path>/ca-key.pem --from-file=<path>/root-cert.pem \
        --from-file=<path>/cert-chain.pem
  3. In the ServiceMeshControlPlane resource set spec.security.dataPlane.mtls true to true and configure the certificateAuthority field as shown in the following example. The default rootCADir is /etc/cacerts. You do not need to set the privateKey if the key and certs are mounted in the default location. Service Mesh reads the certificates and key from the secret-mount files.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    spec:
      security:
        dataPlane:
          mtls: true
        certificateAuthority:
          type: Istiod
          istiod:
            type: PrivateKey
            privateKey:
              rootCADir: /etc/cacerts
  4. After creating/changing/deleting the cacert secret, the Service Mesh control plane istiod and gateway pods must be restarted so the changes go into effect. Use the following command to restart the pods:

    $ oc -n istio-system delete pods -l 'app in (istiod,istio-ingressgateway, istio-egressgateway)'

    The Operator will automatically recreate the pods after they have been deleted.

  5. Restart the bookinfo application pods so that the sidecar proxies pick up the secret changes. Use the following command to restart the pods:

    $ oc -n bookinfo delete pods --all

    You should see output similar to the following:

    pod "details-v1-6cd699df8c-j54nh" deleted
    pod "productpage-v1-5ddcb4b84f-mtmf2" deleted
    pod "ratings-v1-bdbcc68bc-kmng4" deleted
    pod "reviews-v1-754ddd7b6f-lqhsv" deleted
    pod "reviews-v2-675679877f-q67r2" deleted
    pod "reviews-v3-79d7549c7-c2gjs" deleted
  6. Verify that the pods were created and are ready with the following command:

    $ oc get pods -n bookinfo

2.13.5.2. Verifying your certificates

Use the Bookinfo sample application to verify that the workload certificates are signed by the certificates that were plugged into the CA. This process requires that you have openssl installed on your machine.

  1. To extract certificates from bookinfo workloads use the following command:

    $ sleep 60
    $ oc -n bookinfo exec "$(oc -n bookinfo get pod -l app=productpage -o jsonpath={.items..metadata.name})" -c istio-proxy -- openssl s_client -showcerts -connect details:9080 > bookinfo-proxy-cert.txt
    $ sed -n '/-----BEGIN CERTIFICATE-----/{:start /-----END CERTIFICATE-----/!{N;b start};/.*/p}' bookinfo-proxy-cert.txt > certs.pem
    $ awk 'BEGIN {counter=0;} /BEGIN CERT/{counter++} { print > "proxy-cert-" counter ".pem"}' < certs.pem

    After running the command, you should have three files in your working directory: proxy-cert-1.pem, proxy-cert-2.pem and proxy-cert-3.pem.

  2. Verify that the root certificate is the same as the one specified by the administrator. Replace <path> with the path to your certificates.

    $ openssl x509 -in <path>/root-cert.pem -text -noout > /tmp/root-cert.crt.txt

    Run the following syntax at the terminal window.

    $ openssl x509 -in ./proxy-cert-3.pem -text -noout > /tmp/pod-root-cert.crt.txt

    Compare the certificates by running the following syntax at the terminal window.

    $ diff -s /tmp/root-cert.crt.txt /tmp/pod-root-cert.crt.txt

    You should see the following result: Files /tmp/root-cert.crt.txt and /tmp/pod-root-cert.crt.txt are identical

  3. Verify that the CA certificate is the same as the one specified by the administrator. Replace <path> with the path to your certificates.

    $ openssl x509 -in <path>/ca-cert.pem -text -noout > /tmp/ca-cert.crt.txt

    Run the following syntax at the terminal window.

    $ openssl x509 -in ./proxy-cert-2.pem -text -noout > /tmp/pod-cert-chain-ca.crt.txt

    Compare the certificates by running the following syntax at the terminal window.

    $ diff -s /tmp/ca-cert.crt.txt /tmp/pod-cert-chain-ca.crt.txt

    You should see the following result: Files /tmp/ca-cert.crt.txt and /tmp/pod-cert-chain-ca.crt.txt are identical.

  4. Verify the certificate chain from the root certificate to the workload certificate. Replace <path> with the path to your certificates.

    $ openssl verify -CAfile <(cat <path>/ca-cert.pem <path>/root-cert.pem) ./proxy-cert-1.pem

    You should see the following result: ./proxy-cert-1.pem: OK

2.13.5.3. Removing the certificates

To remove the certificates you added, follow these steps.

  1. Remove the secret cacerts. In this example, istio-system is the name of the Service Mesh control plane project.

    $ oc delete secret cacerts -n istio-system
  2. Redeploy Service Mesh with a self-signed root certificate in the ServiceMeshControlPlane resource.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    spec:
      security:
        dataPlane:
          mtls: true

2.13.6. About integrating Service Mesh with cert-manager and istio-csr

The cert-manager tool is a solution for X.509 certificate management on Kubernetes. It delivers a unified API to integrate applications with private or public key infrastructure (PKI), such as Vault, Google Cloud Certificate Authority Service, Let’s Encrypt, and other providers.

The cert-manager tool ensures the certificates are valid and up-to-date by attempting to renew certificates at a configured time before they expire.

For Istio users, cert-manager also provides integration with istio-csr, which is a certificate authority (CA) server that handles certificate signing requests (CSR) from Istio proxies. The server then delegates signing to cert-manager, which forwards CSRs to the configured CA server.

Note

Red Hat provides support for integrating with istio-csr and cert-manager. Red Hat does not provide direct support for the istio-csr or the community cert-manager components. The use of community cert-manager shown here is for demonstration purposes only.

Prerequisites

  • One of these versions of cert-manager:

    • cert-manager Operator for Red Hat OpenShift 1.10 or later
    • community cert-manager Operator 1.11 or later
    • cert-manager 1.11 or later
  • OpenShift Service Mesh Operator 2.4 or later
  • istio-csr 0.6.0 or later
Note

To avoid creating config maps in all namespaces when the istio-csr server is installed with the jetstack/cert-manager-istio-csr Helm chart, use the following setting: app.controller.configmapNamespaceSelector: "maistra.io/member-of: <istio-namespace>" in the istio-csr.yaml file.

2.13.6.1. Installing cert-manager

You can install the cert-manager tool to manage the lifecycle of TLS certificates and ensure that they are valid and up-to-date. If you are running Istio in your environment, you can also install the istio-csr certificate authority (CA) server, which handles certificate signing requests (CSR) from Istio proxies. The istio-csr CA delegates signing to the cert-manager tool, which delegates to the configured CA.

Procedure

  1. Create the root cluster issuer:

    1. Create the cluster-issuer object as in the following example:

      Example cluster-issuer.yaml

      apiVersion: cert-manager.io/v1
      kind: Issuer
      metadata:
        name: selfsigned-root-issuer
        namespace: cert-manager
      spec:
        selfSigned: {}
      ---
      apiVersion: cert-manager.io/v1
      kind: Certificate
      metadata:
        name: root-ca
        namespace: cert-manager
      spec:
        isCA: true
        duration: 21600h # 900d
        secretName: root-ca
        commonName: root-ca.my-company.net
        subject:
          organizations:
          - my-company.net
        issuerRef:
          name: selfsigned-root-issuer
          kind: Issuer
          group: cert-manager.io
      ---
      apiVersion: cert-manager.io/v1
      kind: ClusterIssuer
      metadata:
        name: root-ca
      spec:
        ca:
          secretName: root-ca

      Note

      The namespace of the selfsigned-root-issuer issuer and root-ca certificate is cert-manager because root-ca is a cluster issuer, so the cert-manager looks for a referenced secret in its own namespace. The namespace is called cert-manager in the case of the cert-manager Operator for Red Hat OpenShift.

    2. Create the object by using the following command:

      $ oc apply -f cluster-issuer.yaml
    3. Create the istio-ca object as in the following example:

      Example istio-ca.yaml

      apiVersion: cert-manager.io/v1
      kind: Certificate
      metadata:
        name: istio-ca
        namespace: istio-system
      spec:
        isCA: true
        duration: 21600h
        secretName: istio-ca
        commonName: istio-ca.my-company.net
        subject:
          organizations:
          - my-company.net
        issuerRef:
          name: root-ca
          kind: ClusterIssuer
          group: cert-manager.io
      ---
      apiVersion: cert-manager.io/v1
      kind: Issuer
      metadata:
        name: istio-ca
        namespace: istio-system
      spec:
        ca:
          secretName: istio-ca

    4. Use the following command to create the object:

      $ oc apply -n istio-system -f istio-ca.yaml
  2. Install istio-csr:

    $ helm install istio-csr jetstack/cert-manager-istio-csr \
        -n istio-system \
        -f deploy/examples/cert-manager/istio-csr/istio-csr.yaml

    Example istio-csr.yaml

    replicaCount: 2
    
    image:
      repository: quay.io/jetstack/cert-manager-istio-csr
      tag: v0.6.0
      pullSecretName: ""
    
    app:
      certmanager:
        namespace: istio-system
        issuer:
          group: cert-manager.io
          kind: Issuer
          name: istio-ca
    
      controller:
        configmapNamespaceSelector: "maistra.io/member-of=istio-system"
        leaderElectionNamespace: istio-system
    
      istio:
        namespace: istio-system
        revisions: ["basic"]
    
      server:
        maxCertificateDuration: 5m
    
      tls:
        certificateDNSNames:
        # This DNS name must be set in the SMCP spec.security.certificateAuthority.cert-manager.address
        - cert-manager-istio-csr.istio-system.svc

  3. Deploy SMCP:

    $ oc apply -f mesh.yaml -n istio-system

    Example mesh.yaml

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
    spec:
      addons:
        grafana:
          enabled: false
        kiali:
          enabled: false
        prometheus:
          enabled: false
      proxy:
        accessLogging:
          file:
            name: /dev/stdout
      security:
        certificateAuthority:
          cert-manager:
            address: cert-manager-istio-csr.istio-system.svc:443
          type: cert-manager
        dataPlane:
          mtls: true
        identity:
          type: ThirdParty
      tracing:
        type: None
    ---
    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
    spec:
      members:
      - httpbin
      - sleep

Note

security.identity.type: ThirdParty must be set when security.certificateAuthority.type: cert-manager is configured.

Verification

Use the sample httpbin service and sleep app to check mTLS traffic from ingress gateways and verify that the cert-manager tool is installed.

  1. Deploy the HTTP and sleep apps:

    $ oc new-project <namespace>
    $ oc apply -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/httpbin/httpbin.yaml
    $ oc apply -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/sleep/sleep.yaml
  2. Verify that sleep can access the httpbin service:

    $ oc exec "$(oc get pod -l app=sleep -n <namespace> \
       -o jsonpath={.items..metadata.name})" -c sleep -n <namespace> -- \
       curl http://httpbin.<namespace>:8000/ip -s -o /dev/null \
       -w "%{http_code}\n"

    Example output

    200

  3. Check mTLS traffic from the ingress gateway to the httpbin service:

    $ oc apply -n <namespace> -f https://raw.githubusercontent.com/maistra/istio/maistra-2.4/samples/httpbin/httpbin-gateway.yaml
  4. Get the istio-ingressgateway route:

    INGRESS_HOST=$(oc -n istio-system get routes istio-ingressgateway -o jsonpath='{.spec.host}')
  5. Verify mTLS traffic from the ingress gateway to the httpbin service:

    $ curl -s -I http://$INGRESS_HOST/headers -o /dev/null -w "%{http_code}" -s

2.13.7. Additional resources

For information about how to install the cert-manager Operator for OpenShift Container Platform, see: Installing the cert-manager Operator for Red Hat OpenShift.

2.14. Managing traffic in your service mesh

Using Red Hat OpenShift Service Mesh, you can control the flow of traffic and API calls between services. Some services in your service mesh might need to communicate within the mesh and others might need to be hidden. You can manage the traffic to hide specific backend services, expose services, create testing or versioning deployments, or add a security layer on a set of services.

2.14.1. Using gateways

You can use a gateway to manage inbound and outbound traffic for your mesh to specify which traffic you want to enter or leave the mesh. Gateway configurations are applied to standalone Envoy proxies that are running at the edge of the mesh, rather than sidecar Envoy proxies running alongside your service workloads.

Unlike other mechanisms for controlling traffic entering your systems, such as the Kubernetes Ingress APIs, Red Hat OpenShift Service Mesh gateways use the full power and flexibility of traffic routing.

The Red Hat OpenShift Service Mesh gateway resource can use layer 4-6 load balancing properties, such as ports, to expose and configure Red Hat OpenShift Service Mesh TLS settings. Instead of adding application-layer traffic routing (L7) to the same API resource, you can bind a regular Red Hat OpenShift Service Mesh virtual service to the gateway and manage gateway traffic like any other data plane traffic in a service mesh.

Gateways are primarily used to manage ingress traffic, but you can also configure egress gateways. An egress gateway lets you configure a dedicated exit node for the traffic leaving the mesh. This enables you to limit which services have access to external networks, which adds security control to your service mesh. You can also use a gateway to configure a purely internal proxy.

Gateway example

A gateway resource describes a load balancer operating at the edge of the mesh receiving incoming or outgoing HTTP/TCP connections. The specification describes a set of ports that should be exposed, the type of protocol to use, SNI configuration for the load balancer, and so on.

The following example shows a sample gateway configuration for external HTTPS ingress traffic:

apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: ext-host-gwy
spec:
  selector:
    istio: ingressgateway # use istio default controller
  servers:
  - port:
      number: 443
      name: https
      protocol: HTTPS
    hosts:
    - ext-host.example.com
    tls:
      mode: SIMPLE
      serverCertificate: /tmp/tls.crt
      privateKey: /tmp/tls.key

This gateway configuration lets HTTPS traffic from ext-host.example.com into the mesh on port 443, but doesn’t specify any routing for the traffic.

To specify routing and for the gateway to work as intended, you must also bind the gateway to a virtual service. You do this using the virtual service’s gateways field, as shown in the following example:

apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: virtual-svc
spec:
  hosts:
  - ext-host.example.com
  gateways:
    - ext-host-gwy

You can then configure the virtual service with routing rules for the external traffic.

2.14.1.1. Enabling gateway injection

Gateway configurations apply to standalone Envoy proxies running at the edge of the mesh, rather than sidecar Envoy proxies running alongside your service workloads. Because gateways are Envoy proxies, you can configure Service Mesh to inject gateways automatically, similar to how you can inject sidecars.

Using automatic injection for gateways, you can deploy and manage gateways independent from the ServiceMeshControlPlane resource and manage the gateways with your user applications. Using auto-injection for gateway deployments gives developers full control over the gateway deployment while simplifying operations. When a new upgrade is available, or a configuration has changed, you restart the gateway pods to update them. Doing so makes the experience of operating a gateway deployment the same as operating sidecars.

Note

Injection is disabled by default for the ServiceMeshControlPlane namespace, for example the istio-system namespace. As a security best practice, deploy gateways in a different namespace from the control plane.

2.14.1.2. Deploying automatic gateway injection

When deploying a gateway, you must opt-in to injection by adding an injection label or annotation to the gateway deployment object. The following example deploys a gateway.

Prerequisites

  • The namespace must be a member of the mesh by defining it in the ServiceMeshMemberRoll or by creating a ServiceMeshMember resource.

Procedure

  1. Set a unique label for the Istio ingress gateway. This setting is required to ensure that the gateway can select the workload. This example uses ingressgateway as the name of the gateway.

    apiVersion: v1
    kind: Service
    metadata:
      name: istio-ingressgateway
      namespace: istio-ingress
    spec:
      type: ClusterIP
      selector:
        istio: ingressgateway
      ports:
      - name: http2
        port: 80
        targetPort: 8080
      - name: https
        port: 443
        targetPort: 8443
    ---
    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: istio-ingressgateway
      namespace: istio-ingress
    spec:
      selector:
        matchLabels:
          istio: ingressgateway
      template:
        metadata:
          annotations:
            inject.istio.io/templates: gateway
          labels:
            istio: ingressgateway
            sidecar.istio.io/inject: "true" 1
        spec:
          containers:
          - name: istio-proxy
            image: auto 2
    1
    Enable gateway injection by setting the sidecar.istio.io/inject field to "true".
    2
    Set the image field to auto so that the image automatically updates each time the pod starts.
  2. Set up roles to allow reading credentials for TLS.

    apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: istio-ingressgateway-sds
      namespace: istio-ingress
    rules:
      - apiGroups: [""]
        resources: ["secrets"]
        verbs: ["get", "watch", "list"]
    ---
    apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: istio-ingressgateway-sds
      namespace: istio-ingress
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: Role
      name: istio-ingressgateway-sds
    subjects:
    - kind: ServiceAccount
      name: default
  3. Grant access to the new gateway from outside the cluster, which is required whenever spec.security.manageNetworkPolicy is set to true.

    apiVersion: networking.k8s.io/v1
    kind: NetworkPolicy
    metadata:
      name: gatewayingress
      namespace: istio-ingress
    spec:
      podSelector:
        matchLabels:
          istio: ingressgateway
      ingress:
        - {}
      policyTypes:
      - Ingress
  4. Automatically scale the pod when ingress traffic increases. This example sets the minimum replicas to 2 and the maximum replicas to 5. It also creates another replica when utilization reaches 80%.

    apiVersion: autoscaling/v2
    kind: HorizontalPodAutoscaler
    metadata:
      labels:
        istio: ingressgateway
        release: istio
      name: ingressgatewayhpa
      namespace: istio-ingress
    spec:
      maxReplicas: 5
      metrics:
      - resource:
          name: cpu
          target:
            averageUtilization: 80
            type: Utilization
        type: Resource
      minReplicas: 2
      scaleTargetRef:
        apiVersion: apps/v1
        kind: Deployment
        name: istio-ingressgateway
  5. Specify the minimum number of pods that must be running on the node. This example ensures one replica is running if a pod gets restarted on a new node.

    apiVersion: policy/v1
    kind: PodDisruptionBudget
    metadata:
      labels:
        istio: ingressgateway
        release: istio
      name: ingressgatewaypdb
      namespace: istio-ingress
    spec:
      minAvailable: 1
      selector:
        matchLabels:
          istio: ingressgateway

2.14.1.3. Managing ingress traffic

In Red Hat OpenShift Service Mesh, the Ingress Gateway enables features such as monitoring, security, and route rules to apply to traffic that enters the cluster. Use a Service Mesh gateway to expose a service outside of the service mesh.

2.14.1.3.1. Determining the ingress IP and ports

Ingress configuration differs depending on if your environment supports an external load balancer. An external load balancer is set in the ingress IP and ports for the cluster. To determine if your cluster’s IP and ports are configured for external load balancers, run the following command. In this example, istio-system is the name of the Service Mesh control plane project.

$ oc get svc istio-ingressgateway -n istio-system

That command returns the NAME, TYPE, CLUSTER-IP, EXTERNAL-IP, PORT(S), and AGE of each item in your namespace.

If the EXTERNAL-IP value is set, your environment has an external load balancer that you can use for the ingress gateway.

If the EXTERNAL-IP value is <none>, or perpetually <pending>, your environment does not provide an external load balancer for the ingress gateway.

2.14.1.3.1.1. Determining ingress ports with a load balancer

Follow these instructions if your environment has an external load balancer.

Procedure

  1. Run the following command to set the ingress IP and ports. This command sets a variable in your terminal.

    $ export INGRESS_HOST=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
  2. Run the following command to set the ingress port.

    $ export INGRESS_PORT=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].port}')
  3. Run the following command to set the secure ingress port.

    $ export SECURE_INGRESS_PORT=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].port}')
  4. Run the following command to set the TCP ingress port.

    $ export TCP_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="tcp")].port}')
Note

In some environments, the load balancer may be exposed using a hostname instead of an IP address. For that case, the ingress gateway’s EXTERNAL-IP value is not an IP address. Instead, it is a hostname, and the previous command fails to set the INGRESS_HOST environment variable.

In that case, use the following command to correct the INGRESS_HOST value:

$ export INGRESS_HOST=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].hostname}')
2.14.1.3.1.2. Determining ingress ports without a load balancer

If your environment does not have an external load balancer, determine the ingress ports and use a node port instead.

Procedure

  1. Set the ingress ports.

    $ export INGRESS_PORT=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].nodePort}')
  2. Run the following command to set the secure ingress port.

    $ export SECURE_INGRESS_PORT=$(oc -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].nodePort}')
  3. Run the following command to set the TCP ingress port.

    $ export TCP_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="tcp")].nodePort}')

2.14.1.4. Configuring an ingress gateway

An ingress gateway is a load balancer operating at the edge of the mesh that receives incoming HTTP/TCP connections. It configures exposed ports and protocols but does not include any traffic routing configuration. Traffic routing for ingress traffic is instead configured with routing rules, the same way as for internal service requests.

The following steps show how to create a gateway and configure a VirtualService to expose a service in the Bookinfo sample application to outside traffic for paths /productpage and /login.

Procedure

  1. Create a gateway to accept traffic.

    1. Create a YAML file, and copy the following YAML into it.

      Gateway example gateway.yaml

      apiVersion: networking.istio.io/v1alpha3
      kind: Gateway
      metadata:
        name: bookinfo-gateway
      spec:
        selector:
          istio: ingressgateway
        servers:
        - port:
            number: 80
            name: http
            protocol: HTTP
          hosts:
          - "*"

    2. Apply the YAML file.

      $ oc apply -f gateway.yaml
  2. Create a VirtualService object to rewrite the host header.

    1. Create a YAML file, and copy the following YAML into it.

      Virtual service example

      apiVersion: networking.istio.io/v1alpha3
      kind: VirtualService
      metadata:
        name: bookinfo
      spec:
        hosts:
        - "*"
        gateways:
        - bookinfo-gateway
        http:
        - match:
          - uri:
              exact: /productpage
          - uri:
              prefix: /static
          - uri:
              exact: /login
          - uri:
              exact: /logout
          - uri:
              prefix: /api/v1/products
          route:
          - destination:
              host: productpage
              port:
                number: 9080

    2. Apply the YAML file.

      $ oc apply -f vs.yaml
  3. Test that the gateway and VirtualService have been set correctly.

    1. Set the Gateway URL.

      export GATEWAY_URL=$(oc -n istio-system get route istio-ingressgateway -o jsonpath='{.spec.host}')
    2. Set the port number. In this example, istio-system is the name of the Service Mesh control plane project.

      export TARGET_PORT=$(oc -n istio-system get route istio-ingressgateway -o jsonpath='{.spec.port.targetPort}')
    3. Test a page that has been explicitly exposed.

      curl -s -I "$GATEWAY_URL/productpage"

      The expected result is 200.

2.14.2. Understanding automatic routes

Important

Istio OpenShift Routing (IOR) is a deprecated feature. Deprecated functionality is still included in OpenShift Container Platform and continues to be supported; however, it will be removed in a future release of this product and is not recommended for new deployments.

For the most recent list of major functionality that has been deprecated or removed within OpenShift Container Platform, refer to the Deprecated and removed features section of the OpenShift Container Platform release notes.

OpenShift routes for gateways are automatically managed in Service Mesh. Every time an Istio Gateway is created, updated or deleted inside the service mesh, an OpenShift route is created, updated or deleted.

Note

Starting with Service Mesh 2.5, automatic routes are disabled by default for new instances of the ServiceMeshControlPlane resource.

2.14.2.1. Routes with subdomains

Red Hat OpenShift Service Mesh creates the route with the subdomain, but OpenShift Container Platform must be configured to enable it. Subdomains, for example *.domain.com, are supported, but not by default. Configure an OpenShift Container Platform wildcard policy before configuring a wildcard host gateway.

For more information, see "Using wildcard routes" in Ingress Operator in OpenShift Container Platform.

2.14.2.2. Creating subdomain routes

The following example creates a gateway in the Bookinfo sample application, which creates subdomain routes.

apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: gateway1
spec:
  selector:
    istio: ingressgateway
  servers:
  - port:
      number: 80
      name: http
      protocol: HTTP
    hosts:
    - www.bookinfo.com
    - bookinfo.example.com

The Gateway resource creates the following OpenShift routes. You can check that the routes are created by using the following command. In this example, istio-system is the name of the Service Mesh control plane project.

$ oc -n istio-system get routes

Expected output

NAME           HOST/PORT             PATH  SERVICES               PORT  TERMINATION   WILDCARD
gateway1-lvlfn bookinfo.example.com        istio-ingressgateway   <all>               None
gateway1-scqhv www.bookinfo.com            istio-ingressgateway   <all>               None

If you delete the gateway, Red Hat OpenShift Service Mesh deletes the routes. However, routes you have manually created are never modified by Red Hat OpenShift Service Mesh.

2.14.2.3. Route labels and annotations

Sometimes specific labels or annotations are needed in an OpenShift route. For example, some advanced features in OpenShift routes are managed using special annotations. See "Route-specific annotations" in the following "Additional resources" section.

For this and other use cases, Red Hat OpenShift Service Mesh will copy all labels and annotations present in the Istio gateway resource (with the exception of annotations starting with kubectl.kubernetes.io) into the managed OpenShift route resource.

If you need specific labels or annotations in the OpenShift routes created by Service Mesh, create them in the Istio gateway resource and they will be copied into the OpenShift route resources managed by the Service Mesh.

Additional resources

2.14.2.4. Disabling automatic route creation

By default, the ServiceMeshControlPlane resource automatically synchronizes the Istio gateway resources with OpenShift routes. Disabling the automatic route creation allows you more flexibility to control routes if you have a special case or prefer to control routes manually.

2.14.2.4.1. Disabling automatic route creation for specific cases

If you want to disable the automatic management of OpenShift routes for a specific Istio gateway, you must add the annotation maistra.io/manageRoute: false to the gateway metadata definition. Red Hat OpenShift Service Mesh will ignore Istio gateways with this annotation, while keeping the automatic management of the other Istio gateways.

2.14.2.4.2. Disabling automatic route creation for all cases

You can disable the automatic management of OpenShift routes for all gateways in your mesh.

Disable integration between Istio gateways and OpenShift routes by setting the ServiceMeshControlPlane field gateways.openshiftRoute.enabled to false. For example, see the following resource snippet.

apiVersion: maistra.io/v1alpha1
kind: ServiceMeshControlPlane
metadata:
  namespace: istio-system
spec:
  gateways:
    openshiftRoute:
      enabled: false

2.14.3. Understanding service entries

A service entry adds an entry to the service registry that Red Hat OpenShift Service Mesh maintains internally. After you add the service entry, the Envoy proxies send traffic to the service as if it is a service in your mesh. Service entries allow you to do the following:

  • Manage traffic for services that run outside of the service mesh.
  • Redirect and forward traffic for external destinations (such as, APIs consumed from the web) or traffic to services in legacy infrastructure.
  • Define retry, timeout, and fault injection policies for external destinations.
  • Run a mesh service in a Virtual Machine (VM) by adding VMs to your mesh.
Note

Add services from a different cluster to the mesh to configure a multicluster Red Hat OpenShift Service Mesh mesh on Kubernetes.

Service entry examples

The following example is a mesh-external service entry that adds the ext-resource external dependency to the Red Hat OpenShift Service Mesh service registry:

apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: svc-entry
spec:
  hosts:
  - ext-svc.example.com
  ports:
  - number: 443
    name: https
    protocol: HTTPS
  location: MESH_EXTERNAL
  resolution: DNS

Specify the external resource using the hosts field. You can qualify it fully or use a wildcard prefixed domain name.

You can configure virtual services and destination rules to control traffic to a service entry in the same way you configure traffic for any other service in the mesh. For example, the following destination rule configures the traffic route to use mutual TLS to secure the connection to the ext-svc.example.com external service that is configured using the service entry:

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: ext-res-dr
spec:
  host: ext-svc.example.com
  trafficPolicy:
    tls:
      mode: MUTUAL
      clientCertificate: /etc/certs/myclientcert.pem
      privateKey: /etc/certs/client_private_key.pem
      caCertificates: /etc/certs/rootcacerts.pem

2.14.4. Using VirtualServices

You can route requests dynamically to multiple versions of a microservice through Red Hat OpenShift Service Mesh with a virtual service. With virtual services, you can:

  • Address multiple application services through a single virtual service. If your mesh uses Kubernetes, for example, you can configure a virtual service to handle all services in a specific namespace. A virtual service enables you to turn a monolithic application into a service consisting of distinct microservices with a seamless consumer experience.
  • Configure traffic rules in combination with gateways to control ingress and egress traffic.

2.14.4.1. Configuring VirtualServices

Requests are routed to services within a service mesh with virtual services. Each virtual service consists of a set of routing rules that are evaluated in order. Red Hat OpenShift Service Mesh matches each given request to the virtual service to a specific real destination within the mesh.

Without virtual services, Red Hat OpenShift Service Mesh distributes traffic using least requests load balancing between all service instances. With a virtual service, you can specify traffic behavior for one or more hostnames. Routing rules in the virtual service tell Red Hat OpenShift Service Mesh how to send the traffic for the virtual service to appropriate destinations. Route destinations can be versions of the same service or entirely different services.

Procedure

  1. Create a YAML file using the following example to route requests to different versions of the Bookinfo sample application service depending on which user connects to the application.

    Example VirtualService.yaml

    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: reviews
    spec:
      hosts:
      - reviews
      http:
      - match:
        - headers:
            end-user:
              exact: jason
        route:
        - destination:
            host: reviews
            subset: v2
      - route:
        - destination:
            host: reviews
            subset: v3

  2. Run the following command to apply VirtualService.yaml, where VirtualService.yaml is the path to the file.

    $ oc apply -f <VirtualService.yaml>

2.14.4.2. VirtualService configuration reference

ParameterDescription
spec:
  hosts:

The hosts field lists the virtual service’s destination address to which the routing rules apply. This is the address(es) that are used to send requests to the service. The virtual service hostname can be an IP address, a DNS name, or a short name that resolves to a fully qualified domain name.

spec:
  http:
  - match:

The http section contains the virtual service’s routing rules which describe match conditions and actions for routing HTTP/1.1, HTTP2, and gRPC traffic sent to the destination as specified in the hosts field. A routing rule consists of the destination where you want the traffic to go and any specified match conditions. The first routing rule in the example has a condition that begins with the match field. In this example, this routing applies to all requests from the user jason. Add the headers, end-user, and exact fields to select the appropriate requests.

spec:
  http:
  - match:
    - destination:

The destination field in the route section specifies the actual destination for traffic that matches this condition. Unlike the virtual service’s host, the destination’s host must be a real destination that exists in the Red Hat OpenShift Service Mesh service registry. This can be a mesh service with proxies or a non-mesh service added using a service entry. In this example, the hostname is a Kubernetes service name:

2.14.5. Understanding destination rules

Destination rules are applied after virtual service routing rules are evaluated, so they apply to the traffic’s real destination. Virtual services route traffic to a destination. Destination rules configure what happens to traffic at that destination.

By default, Red Hat OpenShift Service Mesh uses a least requests load balancing policy, where the service instance in the pool with the least number of active connections receives the request. Red Hat OpenShift Service Mesh also supports the following models, which you can specify in destination rules for requests to a particular service or service subset.

  • Random: Requests are forwarded at random to instances in the pool.
  • Weighted: Requests are forwarded to instances in the pool according to a specific percentage.
  • Least requests: Requests are forwarded to instances with the least number of requests.

Destination rule example

The following example destination rule configures three different subsets for the my-svc destination service, with different load balancing policies:

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: my-destination-rule
spec:
  host: my-svc
  trafficPolicy:
    loadBalancer:
      simple: RANDOM
  subsets:
  - name: v1
    labels:
      version: v1
  - name: v2
    labels:
      version: v2
    trafficPolicy:
      loadBalancer:
        simple: ROUND_ROBIN
  - name: v3
    labels:
      version: v3

2.14.6. Understanding network policies

Red Hat OpenShift Service Mesh automatically creates and manages a number of NetworkPolicies resources in the Service Mesh control plane and application namespaces. This is to ensure that applications and the control plane can communicate with each other.

For example, if you have configured your OpenShift Container Platform cluster to use the SDN plugin, Red Hat OpenShift Service Mesh creates a NetworkPolicy resource in each member project. This enables ingress to all pods in the mesh from the other mesh members and the control plane. This also restricts ingress to only member projects. If you require ingress from non-member projects, you need to create a NetworkPolicy to allow that traffic through. If you remove a namespace from Service Mesh, this NetworkPolicy resource is deleted from the project.

2.14.6.1. Disabling automatic NetworkPolicy creation

If you want to disable the automatic creation and management of NetworkPolicy resources, for example to enforce company security policies, or to allow direct access to pods in the mesh, you can do so. You can edit the ServiceMeshControlPlane and set spec.security.manageNetworkPolicy to false.

Note

When you disable spec.security.manageNetworkPolicy Red Hat OpenShift Service Mesh will not create any NetworkPolicy objects. The system administrator is responsible for managing the network and fixing any issues this might cause.

Prerequisites

  • Red Hat OpenShift Service Mesh Operator version 2.1.1 or higher installed.
  • ServiceMeshControlPlane resource updated to version 2.1 or higher.

Procedure

  1. In the OpenShift Container Platform web console, click Operators Installed Operators.
  2. Select the project where you installed the Service Mesh control plane, for example istio-system, from the Project menu.
  3. Click the Red Hat OpenShift Service Mesh Operator. In the Istio Service Mesh Control Plane column, click the name of your ServiceMeshControlPlane, for example basic-install.
  4. On the Create ServiceMeshControlPlane Details page, click YAML to modify your configuration.
  5. Set the ServiceMeshControlPlane field spec.security.manageNetworkPolicy to false, as shown in this example.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    spec:
      security:
          manageNetworkPolicy: false
  6. Click Save.

2.14.7. Configuring sidecars for traffic management

By default, Red Hat OpenShift Service Mesh configures every Envoy proxy to accept traffic on all the ports of its associated workload, and to reach every workload in the mesh when forwarding traffic. You can use a sidecar configuration to do the following:

  • Fine-tune the set of ports and protocols that an Envoy proxy accepts.
  • Limit the set of services that the Envoy proxy can reach.
Note

To optimize performance of your service mesh, consider limiting Envoy proxy configurations.

In the Bookinfo sample application, configure a Sidecar so all services can reach other services running in the same namespace and control plane. This Sidecar configuration is required for using Red Hat OpenShift Service Mesh policy and telemetry features.

Procedure

  1. Create a YAML file using the following example to specify that you want a sidecar configuration to apply to all workloads in a particular namespace. Otherwise, choose specific workloads using a workloadSelector.

    Example sidecar.yaml

    apiVersion: networking.istio.io/v1alpha3
    kind: Sidecar
    metadata:
      name: default
      namespace: bookinfo
    spec:
      egress:
      - hosts:
        - "./*"
        - "istio-system/*"

  2. Run the following command to apply sidecar.yaml, where sidecar.yaml is the path to the file.

    $ oc apply -f sidecar.yaml
  3. Run the following command to verify that the sidecar was created successfully.

    $ oc get sidecar

2.14.8. Routing Tutorial

This guide references the Bookinfo sample application to provide examples of routing in an example application. Install the Bookinfo application to learn how these routing examples work.

2.14.8.1. Bookinfo routing tutorial

The Service Mesh Bookinfo sample application consists of four separate microservices, each with multiple versions. After installing the Bookinfo sample application, three different versions of the reviews microservice run concurrently.

When you access the Bookinfo app /product page in a browser and refresh several times, sometimes the book review output contains star ratings and other times it does not. Without an explicit default service version to route to, Service Mesh routes requests to all available versions one after the other.

This tutorial helps you apply rules that route all traffic to v1 (version 1) of the microservices. Later, you can apply a rule to route traffic based on the value of an HTTP request header.

Prerequisites

  • Deploy the Bookinfo sample application to work with the following examples.

2.14.8.2. Applying a virtual service

In the following procedure, the virtual service routes all traffic to v1 of each micro-service by applying virtual services that set the default version for the micro-services.

Procedure

  1. Apply the virtual services.

    $ oc apply -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/networking/virtual-service-all-v1.yaml
  2. To verify that you applied the virtual services, display the defined routes with the following command:

    $ oc get virtualservices -o yaml

    That command returns a resource of kind: VirtualService in YAML format.

You have configured Service Mesh to route to the v1 version of the Bookinfo microservices including the reviews service version 1.

2.14.8.3. Testing the new route configuration

Test the new configuration by refreshing the /productpage of the Bookinfo application.

Procedure

  1. Set the value for the GATEWAY_URL parameter. You can use this variable to find the URL for your Bookinfo product page later. In this example, istio-system is the name of the control plane project.

    export GATEWAY_URL=$(oc -n istio-system get route istio-ingressgateway -o jsonpath='{.spec.host}')
  2. Run the following command to retrieve the URL for the product page.

    echo "http://$GATEWAY_URL/productpage"
  3. Open the Bookinfo site in your browser.

The reviews part of the page displays with no rating stars, no matter how many times you refresh. This is because you configured Service Mesh to route all traffic for the reviews service to the version reviews:v1 and this version of the service does not access the star ratings service.

Your service mesh now routes traffic to one version of a service.

2.14.8.4. Route based on user identity

Change the route configuration so that all traffic from a specific user is routed to a specific service version. In this case, all traffic from a user named jason will be routed to the service reviews:v2.

Service Mesh does not have any special, built-in understanding of user identity. This example is enabled by the fact that the productpage service adds a custom end-user header to all outbound HTTP requests to the reviews service.

Procedure

  1. Run the following command to enable user-based routing in the Bookinfo sample application.

    $ oc apply -f https://raw.githubusercontent.com/Maistra/istio/maistra-2.6/samples/bookinfo/networking/virtual-service-reviews-test-v2.yaml
  2. Run the following command to confirm the rule is created. This command returns all resources of kind: VirtualService in YAML format.

    $ oc get virtualservice reviews -o yaml
  3. On the /productpage of the Bookinfo app, log in as user jason with no password.
  4. Refresh the browser. The star ratings appear next to each review.
  5. Log in as another user (pick any name you want). Refresh the browser. Now the stars are gone. Traffic is now routed to reviews:v1 for all users except Jason.

You have successfully configured the Bookinfo sample application to route traffic based on user identity.

2.15. Gateway migration

As a network administrator, the preferred method for deploying ingress and egress gateways is with a Deployment resource using gateway injection.

2.15.1. About gateway migration

In Red Hat OpenShift Service Mesh 2.x, the Service Mesh Operator creates an ingress and egress gateway in the control plane namespace by default. You can define additional gateways in the ServiceMeshControlPlane resource.

Deploying ingress and egress gateways with a Deployment resource using gateway injection provides greater flexibility and control. This deployment approach is a better practice because it allows you to manage gateways alongside the corresponding applications rather than in the control plane resource. Therefore, you should disable the default gateways, move away from the Service Mesh Control Plane declaration, and begin to use gateway injection.

2.15.2. Migrate from SMCP-Defined gateways to gateway injection

This procedure explains how to migrate with zero downtime from gateways defined in the ServiceMeshControlPlane resource to gateways that are managed using gateway injection. This migration is achieved by using the existing gateway Service object to target a new gateway deployment that is created using gateway injection.

Prerequisites

  • You are logged in to the OpenShift Container Platform web console as cluster-admin.
  • The Red Hat OpenShift Service Mesh Operator must be installed.
  • The ServiceMeshControlPlane resource must be deployed and an ingress gateway exists in the configuration.

Procedure

  1. Create a new ingress gateway that is configured to use gateway injection.

    Note

    This procedure migrates away from the default ingress gateway deployment defined in the ServiceMeshControlPlane resource to gateway injection. The procedure may be modified to migrate from additional ingress gateways configured in the SMCP.

    Example ingress gateway resource with gateway injection

    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: istio-ingressgateway-canary
      namespace: istio-system 1
    spec:
      selector:
        matchLabels:
          app: istio-ingressgateway
          istio: ingressgateway
      template:
        metadata:
          annotations:
            inject.istio.io/templates: gateway
          labels: 2
            app: istio-ingressgateway
            istio: ingressgateway
            sidecar.istio.io/inject: "true"
        spec:
          containers:
            - name: istio-proxy
              image: auto
          serviceAccountName: istio-ingressgateway
    ---
    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: istio-ingressgateway
      namespace: istio-system
    ---
    apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: secret-reader
      namespace: istio-system
    rules:
      - apiGroups: [""]
        resources: ["secrets"]
        verbs: ["get", "watch", "list"]
    ---
    apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: istio-ingressgateway-secret-reader
      namespace: istio-system
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: Role
      name: secret-reader
    subjects:
      - kind: ServiceAccount
        name: istio-ingressgateway
    ---
    apiVersion: networking.k8s.io/v1
    kind: NetworkPolicy 3
    metadata:
      name: gatewayingress
      namespace: istio-system
    spec:
      podSelector:
        matchLabels:
          istio: ingressgateway
      ingress:
        - {}
      policyTypes:
        - Ingress

    1
    The gateway injection deployment and all supporting resources should be deployed in the same namespace as the SMCP-defined gateway.
    2
    Ensure that the labels specified in the pod template include all of the label selectors specified in the Service object associated with the existing SMCP-defined gateway.
    3
    Grant access to the new gateway from outside the cluster. This access is required whenever the spec.security.manageNetworkPolicy of the ServiceMeshControlPlane resource is set to true, which is the default setting.
  2. Verify that the new gateway deployment is successfully handling requests.

    If access logging was configured in the ServiceMeshControlPlane resource, view the access logs of the new gateway deployment to confirm the behavior.

  3. Scale down the old deployment and scale up the new deployment.

    Gradually shift traffic from the old gateway deployment to the new gateway deployment by performing the following steps:

    1. Increase the number of replicas for the new gateway deployment by running the following command:

      $ oc scale -n istio-system deployment/<new_gateway_deployment> --replicas <new_number_of_replicas>
    2. Decrease the number of replicas for the old gateway deployment by running the following command:

      $ oc scale -n istio-system deployment/<old_gateway_deployment> --replicas <new_number_of_replicas>
    3. Repeat running the previous two commands. Each time, increase the number of replicas for the new gateway deployment and decrease the number of replicas for the old gateway deployment. Continue repeating until the new gateway deployment handles all traffic to the gateway Service object.
  4. Remove the app.kubernetes.io/managed-by label from the gateway Service object by running the following command:

    $ oc label service -n istio-system istio-ingressgateway app.kubernetes.io/managed-by-

    Removing the label prevents the service from being deleted when the gateway is disabled in the ServiceMeshControlPlane resource.

  5. Remove the ownerReferences object from the gateway Service object by running the following command:

    $ oc patch service -n istio-system istio-ingressgateway --type='json' -p='[{"op": "remove", "path": "/metadata/ownerReferences"}]'

    Removing this object prevents the service from being garbage collected when the ServiceMeshControlPlane resource is deleted.

  6. Disable the old gateway deployment that was managed by the ServiceMeshControlPlane resource by running the following command:

    $ oc patch smcp -n istio-system <smcp_name> --type='json' -p='[{"op": "replace", "path": "/spec/gateways/ingress/enabled", "value": false}]'
    Note

    When the old ingress gateway Service object is disabled it is not deleted. You may save this Service object to a file and manage it alongside the new gateway injection resources.

2.15.3. Additional resources

2.16. Route migration

Automatic route creation, also known as Istio OpenShift Routing (IOR), is a deprecated feature that is disabled by default for any ServiceMeshControlPlane resource that was created using Red Hat OpenShift Service Mesh 2.5 and later. Migrating from IOR to explicitly-managed routes provides a more flexible way to manage and configure ingress gateways. When route resources are explicitly created they can be managed alongside the other gateway and application resources as part of a GitOps management model.

2.16.1. Migrating from Istio OpenShift Routing to explicitly-managed routes

This procedure explains how to disable Istio OpenShift Routing (IOR) in Red Hat OpenShift Service Mesh, and how to continue to use and manage Routes that were originally created using IOR. This procedure also provides an example of how to explicitly create a new Route targeting an existing gateway Service object.

Prerequisites

  • Before migrating to explicitly-managed routes, export the existing route configurations managed by Istio OpenShift Routing (IOR) to files. Save the files so that in the future you can recreate the route configurations without requiring IOR.

Procedure

  • Modify the ServiceMeshControlPlane resource to disable IOR:

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    spec:
      gateways:
        openshiftRoute:
          enabled: false

    You can continue to use the old routes that were previously created using IOR or you can create routes that explicitly target the ingress gateway Service object. The following example specifies how to create routes that explicitly target the ingress gateway Service object:

    kind: Route
    apiVersion: route.openshift.io/v1
    metadata:
      name: example-gateway
      namespace: istio-system 1
    spec:
      host: www.example.com
      to:
        kind: Service
        name: istio-ingressgateway 2
        weight: 100
      port:
        targetPort: http2
      wildcardPolicy: None
    1
    Specify new routes in the same namespace as the ingress gateway Service object.
    2
    Use the name of ingress gateway Service object that is the target.

2.16.2. Additional resources

2.17. Metrics, logs, and traces

Once you have added your application to the mesh, you can observe the data flow through your application. If you do not have your own application installed, you can see how observability works in Red Hat OpenShift Service Mesh by installing the Bookinfo sample application.

2.17.1. Discovering console addresses

Red Hat OpenShift Service Mesh provides the following consoles to view your service mesh data:

  • Kiali console - Kiali is the management console for Red Hat OpenShift Service Mesh.
  • Jaeger console - Jaeger is the management console for Red Hat OpenShift distributed tracing platform.
  • Grafana console - Grafana provides mesh administrators with advanced query and metrics analysis and dashboards for Istio data. Optionally, Grafana can be used to analyze service mesh metrics.
  • Prometheus console - Red Hat OpenShift Service Mesh uses Prometheus to store telemetry information from services.

When you install the Service Mesh control plane, it automatically generates routes for each of the installed components. Once you have the route address, you can access the Kiali, Jaeger, Prometheus, or Grafana console to view and manage your service mesh data.

Prerequisite

  • The component must be enabled and installed. For example, if you did not install distributed tracing, you will not be able to access the Jaeger console.

Procedure from OpenShift console

  1. Log in to the OpenShift Container Platform web console as a user with cluster-admin rights. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  2. Navigate to Networking Routes.
  3. On the Routes page, select the Service Mesh control plane project, for example istio-system, from the Namespace menu.

    The Location column displays the linked address for each route.

  4. If necessary, use the filter to find the component console whose route you want to access. Click the route Location to launch the console.
  5. Click Log In With OpenShift.

Procedure from the CLI

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. Switch to the Service Mesh control plane project. In this example, istio-system is the Service Mesh control plane project. Run the following command:

    $ oc project istio-system
  3. To get the routes for the various Red Hat OpenShift Service Mesh consoles, run the folowing command:

    $ oc get routes

    This command returns the URLs for the Kiali, Jaeger, Prometheus, and Grafana web consoles, and any other routes in your service mesh. You should see output similar to the following:

    NAME                    HOST/PORT                         SERVICES              PORT    TERMINATION
    bookinfo-gateway        bookinfo-gateway-yourcompany.com  istio-ingressgateway          http2
    grafana                 grafana-yourcompany.com           grafana               <all>   reencrypt/Redirect
    istio-ingressgateway    istio-ingress-yourcompany.com     istio-ingressgateway  8080
    jaeger                  jaeger-yourcompany.com            jaeger-query          <all>   reencrypt
    kiali                   kiali-yourcompany.com             kiali                 20001   reencrypt/Redirect
    prometheus              prometheus-yourcompany.com        prometheus            <all>   reencrypt/Redirect
  4. Copy the URL for the console you want to access from the HOST/PORT column into a browser to open the console.
  5. Click Log In With OpenShift.

2.17.2. Accessing the Kiali console

You can view your application’s topology, health, and metrics in the Kiali console. If your service is experiencing problems, the Kiali console lets you view the data flow through your service. You can view insights about the mesh components at different levels, including abstract applications, services, and workloads. Kiali also provides an interactive graph view of your namespace in real time.

To access the Kiali console you must have Red Hat OpenShift Service Mesh installed, Kiali installed and configured.

The installation process creates a route to access the Kiali console.

If you know the URL for the Kiali console, you can access it directly. If you do not know the URL, use the following directions.

Procedure for administrators

  1. Log in to the OpenShift Container Platform web console with an administrator role.
  2. Click Home Projects.
  3. On the Projects page, if necessary, use the filter to find the name of your project.
  4. Click the name of your project, for example, bookinfo.
  5. On the Project details page, in the Launcher section, click the Kiali link.
  6. Log in to the Kiali console with the same user name and password that you use to access the OpenShift Container Platform console.

    When you first log in to the Kiali Console, you see the Overview page which displays all the namespaces in your service mesh that you have permission to view.

    If you are validating the console installation and namespaces have not yet been added to the mesh, there might not be any data to display other than istio-system.

Procedure for developers

  1. Log in to the OpenShift Container Platform web console with a developer role.
  2. Click Project.
  3. On the Project Details page, if necessary, use the filter to find the name of your project.
  4. Click the name of your project, for example, bookinfo.
  5. On the Project page, in the Launcher section, click the Kiali link.
  6. Click Log In With OpenShift.

2.17.3. Viewing service mesh data in the Kiali console

The Kiali Graph offers a powerful visualization of your mesh traffic. The topology combines real-time request traffic with your Istio configuration information to present immediate insight into the behavior of your service mesh, letting you quickly pinpoint issues. Multiple Graph Types let you visualize traffic as a high-level service topology, a low-level workload topology, or as an application-level topology.

There are several graphs to choose from:

  • The App graph shows an aggregate workload for all applications that are labeled the same.
  • The Service graph shows a node for each service in your mesh but excludes all applications and workloads from the graph. It provides a high level view and aggregates all traffic for defined services.
  • The Versioned App graph shows a node for each version of an application. All versions of an application are grouped together.
  • The Workload graph shows a node for each workload in your service mesh. This graph does not require you to use the application and version labels. If your application does not use version labels, use this the graph.

Graph nodes are decorated with a variety of information, pointing out various route routing options like virtual services and service entries, as well as special configuration like fault-injection and circuit breakers. It can identify mTLS issues, latency issues, error traffic and more. The Graph is highly configurable, can show traffic animation, and has powerful Find and Hide abilities.

Click the Legend button to view information about the shapes, colors, arrows, and badges displayed in the graph.

To view a summary of metrics, select any node or edge in the graph to display its metric details in the summary details panel.

2.17.3.1. Changing graph layouts in Kiali

The layout for the Kiali graph can render differently depending on your application architecture and the data to display. For example, the number of graph nodes and their interactions can determine how the Kiali graph is rendered. Because it is not possible to create a single layout that renders nicely for every situation, Kiali offers a choice of several different layouts.

Prerequisites

  • If you do not have your own application installed, install the Bookinfo sample application. Then generate traffic for the Bookinfo application by entering the following command several times.

    $ curl "http://$GATEWAY_URL/productpage"

    This command simulates a user visiting the productpage microservice of the application.

Procedure

  1. Launch the Kiali console.
  2. Click Log In With OpenShift.
  3. In Kiali console, click Graph to view a namespace graph.
  4. From the Namespace menu, select your application namespace, for example, bookinfo.
  5. To choose a different graph layout, do either or both of the following:

    • Select different graph data groupings from the menu at the top of the graph.

      • App graph
      • Service graph
      • Versioned App graph (default)
      • Workload graph
    • Select a different graph layout from the Legend at the bottom of the graph.

      • Layout default dagre
      • Layout 1 cose-bilkent
      • Layout 2 cola

2.17.3.2. Viewing logs in the Kiali console

You can view logs for your workloads in the Kiali console. The Workload Detail page includes a Logs tab which displays a unified logs view that displays both application and proxy logs. You can select how often you want the log display in Kiali to be refreshed.

To change the logging level on the logs displayed in Kiali, you change the logging configuration for the workload or the proxy.

Prerequisites

  • Service Mesh installed and configured.
  • Kiali installed and configured.
  • The address for the Kiali console.
  • Application or Bookinfo sample application added to the mesh.

Procedure

  1. Launch the Kiali console.
  2. Click Log In With OpenShift.

    The Kiali Overview page displays namespaces that have been added to the mesh that you have permissions to view.

  3. Click Workloads.
  4. On the Workloads page, select the project from the Namespace menu.
  5. If necessary, use the filter to find the workload whose logs you want to view. Click the workload Name. For example, click ratings-v1.
  6. On the Workload Details page, click the Logs tab to view the logs for the workload.
Tip

If you do not see any log entries, you may need to adjust either the Time Range or the Refresh interval.

2.17.3.3. Viewing metrics in the Kiali console

You can view inbound and outbound metrics for your applications, workloads, and services in the Kiali console. The Detail pages include the following tabs:

  • inbound Application metrics
  • outbound Application metrics
  • inbound Workload metrics
  • outbound Workload metrics
  • inbound Service metrics

These tabs display predefined metrics dashboards, tailored to the relevant application, workload or service level. The application and workload detail views show request and response metrics such as volume, duration, size, or TCP traffic. The service detail view shows request and response metrics for inbound traffic only.

Kiali lets you customize the charts by choosing the charted dimensions. Kiali can also present metrics reported by either source or destination proxy metrics. And for troubleshooting, Kiali can overlay trace spans on the metrics.

Prerequisites

  • Service Mesh installed and configured.
  • Kiali installed and configured.
  • The address for the Kiali console.
  • (Optional) Distributed tracing installed and configured.

Procedure

  1. Launch the Kiali console.
  2. Click Log In With OpenShift.

    The Kiali Overview page displays namespaces that have been added to the mesh that you have permissions to view.

  3. Click either Applications, Workloads, or Services.
  4. On the Applications, Workloads, or Services page, select the project from the Namespace menu.
  5. If necessary, use the filter to find the application, workload, or service whose logs you want to view. Click the Name.
  6. On the Application Detail, Workload Details, or Service Details page, click either the Inbound Metrics or Outbound Metrics tab to view the metrics.

2.17.4. Distributed tracing

Distributed tracing is the process of tracking the performance of individual services in an application by tracing the path of the service calls in the application. Each time a user takes action in an application, a request is executed that might require many services to interact to produce a response. The path of this request is called a distributed transaction.

Red Hat OpenShift Service Mesh uses Red Hat OpenShift distributed tracing platform to allow developers to view call flows in a microservice application.

2.17.4.1. Configuring the Red Hat OpenShift distributed tracing platform (Tempo) and the Red Hat build of OpenTelemetry

You can expose tracing data to the Red Hat OpenShift distributed tracing platform (Tempo) by appending a named element and the opentelemetry provider to the spec.meshConfig.extensionProviders specification in the ServiceMeshControlPlane. Then, a telemetry custom resource configures Istio proxies to collect trace spans and send them to the OpenTelemetry Collector endpoint.

You can create a Red Hat build of OpenTelemetry instance in a mesh namespace and configure it to send tracing data to a tracing platform backend service.

Prerequisites

  • You created a TempoStack instance using the Red Hat Tempo Operator in the tracing-system namespace. For more information, see "Installing Red Hat OpenShift distributed tracing platform (Tempo)".
  • You installed the Red Hat build of OpenTelemetry Operator in either the recommended namespace or the openshift-operators namespace. For more information, see "Installing the Red Hat build of OpenTelemetry".
  • If using Red Hat OpenShift Service Mesh 2.5 or earlier, set the spec.tracing.type parameter of the ServiceMeshControlPlane resource to None so tracing data can be sent to the OpenTelemetry Collector.

Procedure

  1. Create an OpenTelemetry Collector instance in a mesh namespace. This example uses the bookinfo namespace:

    Example OpenTelemetry Collector configuration

    apiVersion: opentelemetry.io/v1alpha1
    kind: OpenTelemetryCollector
    metadata:
      name: otel
      namespace: bookinfo  1
    spec:
      mode: deployment
      config: |
        receivers:
          otlp:
            protocols:
              grpc:
                endpoint: 0.0.0.0:4317
        exporters:
          otlp:
            endpoint: "tempo-sample-distributor.tracing-system.svc.cluster.local:4317" 2
            tls:
              insecure: true
        service:
          pipelines:
            traces:
              receivers: [otlp]
              processors: []
              exporters: [otlp]

    1
    Include the namespace in the ServiceMeshMemberRoll member list.
    2
    In this example, a TempoStack instance is running in the tracing-system namespace. You do not have to include the TempoStack namespace, such as`tracing-system`, in the ServiceMeshMemberRoll member list.
    Note
    • Create a single instance of the OpenTelemetry Collector in one of the ServiceMeshMemberRoll member namespaces.
    • You can add an otel-collector as a part of the mesh by adding sidecar.istio.io/inject: 'true' to the OpenTelemetryCollector resource.
  2. Check the otel-collector pod log and verify that the pod is running:

    Example otel-collector pod log check

    $ oc logs -n bookinfo  -l app.kubernetes.io/name=otel-collector

  3. Create or update an existing ServiceMeshControlPlane custom resource (CR) in the istio-system namespace:

    Example SMCP custom resource

    kind: ServiceMeshControlPlane
    apiVersion: maistra.io/v2
    metadata:
      name: basic
      namespace: istio-system
    spec:
      addons:
        grafana:
          enabled: false
        kiali:
          enabled: true
        prometheus:
          enabled: true
      meshConfig:
        extensionProviders:
          - name: otel
            opentelemetry:
              port: 4317
              service: otel-collector.bookinfo.svc.cluster.local
      policy:
        type: Istiod
      telemetry:
        type: Istiod
      version: v2.6

    Note

    When upgrading from SMCP 2.5 to 2.6, set the spec.tracing.type parameter to None:

    Example SMCP spec.tracing.type parameter

    spec:
      tracing:
        type: None

  4. Create a Telemetry resource in the istio-system namespace:

    Example Telemetry resource

    apiVersion: telemetry.istio.io/v1alpha1
    kind: Telemetry
    metadata:
      name: mesh-default
      namespace: istio-system
    spec:
      tracing:
      - providers:
        - name: otel
        randomSamplingPercentage: 100

  5. Verify the istiod log.
  6. Configure the Kiali resource specification to enable a Kiali workload traces dashboard. You can use the dashboard to view tracing query results.

    Example Kiali resource

    apiVersion: kiali.io/v1alpha1
    kind: Kiali
    # ...
    spec:
      external_services:
        tracing:
          query_timeout: 30 1
          enabled: true
          in_cluster_url: 'http://tempo-sample-query-frontend.tracing-system.svc.cluster.local:16685'
          url: '[Tempo query frontend Route url]'
          use_grpc: true 2

    1
    The default query_timeout integer value is 30 seconds. If you set the value to greater than 30 seconds, you must update .spec.server.write_timeout in the Kiali CR and add the annotation haproxy.router.openshift.io/timeout=50s to the Kiali route. Both .spec.server.write_timeout and haproxy.router.openshift.io/timeout= must be greater than query_timeout.
    2
    If you are not using the default HTTP or gRPC port, replace the in_cluster_url: port with your custom port.
    Note

    Kiali 1.73 uses the Jaeger Query API, which causes a longer response time depending on Tempo resource limits. If you see a Could not fetch spans error message in the Kiali UI, then check your Tempo configuration or reduce the limit per query in Kiali.

  7. Send requests to your application.
  8. Verify the istiod pod logs and the otel-collector pod logs.
2.17.4.1.1. Configuring the OpenTelemetryCollector in a mTLS encrypted Service Mesh member namespace

All traffic is TLS encrypted when you enable Service Mesh dataPlane mTLS encryption.

To enable the mesh to communicate with the OpenTelemetryCollector service, disable the TLS trafficPolicy by applying a DestinationRule for the OpenTelemetryCollector service:

Example DestinationRule Tempo CR

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: otel-disable-tls
spec:
  host: "otel-collector.bookinfo.svc.cluster.local"
  trafficPolicy:
    tls:
      mode: DISABLE

2.17.4.1.2. Configuring the Red Hat OpenShift distributed tracing platform (Tempo) in a mTLS encrypted Service Mesh member namespace
Note

You don’t need this additional DestinationRule configuration if you created a TempoStack instance in a namespace that is not a Service Mesh member namespace.

All traffic is TLS encrypted when you enable Service Mesh dataPlane mTLS encryption and you create a TempoStack instance in a Service Mesh member namespace such as tracing-system-mtls. This encryption is not expected from the Tempo distributed service and returns a TLS error.

To fix the TLS error, disable the TLS trafficPolicy by applying a DestinationRule for Tempo and Kiali:

Example DestinationRule Tempo

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: tempo
  namespace: tracing-system-mtls
spec:
  host: "*.tracing-system-mtls.svc.cluster.local"
  trafficPolicy:
    tls:
      mode: DISABLE

Example DestinationRule Kiali

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: kiali
  namespace: istio-system
spec:
  host: kiali.istio-system.svc.cluster.local
  trafficPolicy:
    tls:
      mode: DISABLE

2.17.4.2. Connecting an existing distributed tracing Jaeger instance

If you already have an existing Red Hat OpenShift distributed tracing platform (Jaeger) instance in OpenShift Container Platform, you can configure your ServiceMeshControlPlane resource to use that instance for distributed tracing platform.

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator are deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for these features during the current release lifecycle, but these features will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

Prerequisites

  • Red Hat OpenShift distributed tracing platform instance installed and configured.

Procedure

  1. In the OpenShift Container Platform web console, click Operators Installed Operators.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Click the Red Hat OpenShift Service Mesh Operator. In the Istio Service Mesh Control Plane column, click the name of your ServiceMeshControlPlane resource, for example basic.
  4. Add the name of your distributed tracing platform (Jaeger) instance to the ServiceMeshControlPlane.

    1. Click the YAML tab.
    2. Add the name of your distributed tracing platform (Jaeger) instance to spec.addons.jaeger.name in your ServiceMeshControlPlane resource. In the following example, distr-tracing-production is the name of the distributed tracing platform (Jaeger) instance.

      Example distributed tracing configuration

      spec:
        addons:
          jaeger:
            name: distr-tracing-production

    3. Click Save.
  5. Click Reload to verify the ServiceMeshControlPlane resource was configured correctly.

2.17.4.3. Adjusting the sampling rate

A trace is an execution path between services in the service mesh. A trace is comprised of one or more spans. A span is a logical unit of work that has a name, start time, and duration. The sampling rate determines how often a trace is persisted.

The Envoy proxy sampling rate is set to sample 100% of traces in your service mesh by default. A high sampling rate consumes cluster resources and performance but is useful when debugging issues. Before you deploy Red Hat OpenShift Service Mesh in production, set the value to a smaller proportion of traces. For example, set spec.tracing.sampling to 100 to sample 1% of traces.

Configure the Envoy proxy sampling rate as a scaled integer representing 0.01% increments.

In a basic installation, spec.tracing.sampling is set to 10000, which samples 100% of traces. For example:

  • Setting the value to 10 samples 0.1% of traces.
  • Setting the value to 500 samples 5% of traces.
Note

The Envoy proxy sampling rate applies for applications that are available to a Service Mesh, and use the Envoy proxy. This sampling rate determines how much data the Envoy proxy collects and tracks.

The Jaeger remote sampling rate applies to applications that are external to the Service Mesh, and do not use the Envoy proxy, such as a database. This sampling rate determines how much data the distributed tracing system collects and stores. For more information, see Distributed tracing configuration options.

Procedure

  1. In the OpenShift Container Platform web console, click Operators Installed Operators.
  2. Click the Project menu and select the project where you installed the control plane, for example istio-system.
  3. Click the Red Hat OpenShift Service Mesh Operator. In the Istio Service Mesh Control Plane column, click the name of your ServiceMeshControlPlane resource, for example basic.
  4. To adjust the sampling rate, set a different value for spec.tracing.sampling.

    1. Click the YAML tab.
    2. Set the value for spec.tracing.sampling in your ServiceMeshControlPlane resource. In the following example, set it to 100.

      Jaeger sampling example

      spec:
        tracing:
          sampling: 100

    3. Click Save.
  5. Click Reload to verify the ServiceMeshControlPlane resource was configured correctly.

2.17.5. Accessing the Jaeger console

To access the Jaeger console you must have Red Hat OpenShift Service Mesh installed, Red Hat OpenShift distributed tracing platform (Jaeger) installed and configured.

The installation process creates a route to access the Jaeger console.

If you know the URL for the Jaeger console, you can access it directly. If you do not know the URL, use the following directions.

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator have been deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for this feature during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

Procedure from OpenShift console

  1. Log in to the OpenShift Container Platform web console as a user with cluster-admin rights. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  2. Navigate to Networking Routes.
  3. On the Routes page, select the Service Mesh control plane project, for example istio-system, from the Namespace menu.

    The Location column displays the linked address for each route.

  4. If necessary, use the filter to find the jaeger route. Click the route Location to launch the console.
  5. Click Log In With OpenShift.

Procedure from Kiali console

  1. Launch the Kiali console.
  2. Click Distributed Tracing in the left navigation pane.
  3. Click Log In With OpenShift.

Procedure from the CLI

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. To query for details of the route using the command line, enter the following command. In this example, istio-system is the Service Mesh control plane namespace.

    $ oc get route -n istio-system jaeger -o jsonpath='{.spec.host}'
  3. Launch a browser and navigate to https://<JAEGER_URL>, where <JAEGER_URL> is the route that you discovered in the previous step.
  4. Log in using the same user name and password that you use to access the OpenShift Container Platform console.
  5. If you have added services to the service mesh and have generated traces, you can use the filters and Find Traces button to search your trace data.

    If you are validating the console installation, there is no trace data to display.

For more information about configuring Jaeger, see the distributed tracing documentation.

2.17.6. Accessing the Grafana console

Grafana is an analytics tool you can use to view, query, and analyze your service mesh metrics. In this example, istio-system is the Service Mesh control plane namespace. To access Grafana, do the following:

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Click Routes.
  4. Click the link in the Location column for the Grafana row.
  5. Log in to the Grafana console with your OpenShift Container Platform credentials.

2.17.7. Accessing the Prometheus console

Prometheus is a monitoring and alerting tool that you can use to collect multi-dimensional data about your microservices. In this example, istio-system is the Service Mesh control plane namespace.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Click Routes.
  4. Click the link in the Location column for the Prometheus row.
  5. Log in to the Prometheus console with your OpenShift Container Platform credentials.

2.17.8. Integrating with user-workload monitoring

By default, Red Hat OpenShift Service Mesh (OSSM) installs the Service Mesh control plane (SMCP) with a dedicated instance of Prometheus for collecting metrics from a mesh. However, production systems need more advanced monitoring systems, like OpenShift Container Platform monitoring for user-defined projects.

The following steps show how to integrate Service Mesh with user-workload monitoring.

Prerequisites

  • User-workload monitoring is enabled.
  • Red Hat OpenShift Service Mesh Operator 2.4 is installed.
  • Kiali Operator 1.65 is installed.

Procedure

  1. Grant the cluster-monitoring-view role to the Kiali Service Account:

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: kiali-monitoring-rbac
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: ClusterRole
      name: cluster-monitoring-view
    subjects:
    - kind: ServiceAccount
      name: kiali-service-account
      namespace: istio-system
  2. Configure Kiali for user-workload monitoring:

    apiVersion: kiali.io/v1alpha1
    kind: Kiali
    metadata:
      name: kiali-user-workload-monitoring
      namespace: istio-system
    spec:
      external_services:
        prometheus:
          auth:
            type: bearer
            use_kiali_token: true
          query_scope:
            mesh_id: "basic-istio-system"
          thanos_proxy:
            enabled: true
          url: https://thanos-querier.openshift-monitoring.svc.cluster.local:9091
    • If you use Istio Operator 2.4, use this configuration to configure Kiali for user-workload monitoring:

      apiVersion: kiali.io/v1alpha1
      kind: Kiali
      metadata:
        name: kiali-user-workload-monitoring
        namespace: istio-system
      spec:
        external_services:
          istio:
            config_map_name: istio-<smcp-name>
            istio_sidecar_injector_config_map_name: istio-sidecar-injector-<smcp-name>
            istiod_deployment_name: istiod-<smcp-name>
            url_service_version: 'http://istiod-<smcp-name>.istio-system:15014/version'
          prometheus:
            auth:
              token: secret:thanos-querier-web-token:token
              type: bearer
              use_kiali_token: false
            query_scope:
              mesh_id: "basic-istio-system"
            thanos_proxy:
              enabled: true
            url: https://thanos-querier.openshift-monitoring.svc.cluster.local:9091
        version: v1.65
  3. Configure the SMCP for external Prometheus:

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      addons:
        prometheus:
          enabled: false 1
        grafana:
          enabled: false 2
        kiali:
          name: kiali-user-workload-monitoring
      meshConfig:
        extensionProviders:
        - name: prometheus
          prometheus: {}
    1
    Disable the default Prometheus instance provided by OSSM.
    2
    Disable Grafana. It is not supported with an external Prometheus instance.
  4. Apply a custom network policy to allow ingress traffic from the monitoring namespace:

    apiVersion: networking.k8s.io/v1
    kind: NetworkPolicy
    metadata:
      name: user-workload-access
      namespace: istio-system 1
    spec:
      ingress:
      - from:
        - namespaceSelector:
            matchLabels:
              network.openshift.io/policy-group: monitoring
      podSelector: {}
      policyTypes:
      - Ingress
    1
    The custom network policy must be applied to all namespaces.
  5. Apply a Telemetry object to enable traffic metrics in Istio proxies:

    apiVersion: telemetry.istio.io/v1alpha1
    kind: Telemetry
    metadata:
      name: enable-prometheus-metrics
      namespace: istio-system 1
    spec:
      selector: 2
        matchLabels:
          app: bookinfo
      metrics:
      - providers:
        - name: prometheus
    1
    A Telemetry object created in the control plane namespace applies to all workloads in a mesh. To apply telemetry to only one namespace, create the object in the target namespace.
    2
    Optional: Setting the selector.matchLabels spec applies the Telemetry object to specific workloads in the target namespace.
  6. Apply a ServiceMonitor object to monitor the Istio control plane:

    apiVersion: monitoring.coreos.com/v1
    kind: ServiceMonitor
    metadata:
      name: istiod-monitor
      namespace: istio-system 1
    spec:
      targetLabels:
      - app
      selector:
        matchLabels:
          istio: pilot
      endpoints:
      - port: http-monitoring
        interval: 30s
        relabelings:
        - action: replace
          replacement: "basic-istio-system" 2
          targetLabel: mesh_id
    1
    Create this ServiceMonitor object in the Istio control plane namespace because it monitors the Istiod service. In this example, the namespace is istio-system.
    2
    The string "basic-istio-system" is a combination of the SMCP name and its namespace, but any label can be used as long as it is unique for every mesh using user workload monitoring in the cluster. The spec.prometheus.query_scope of the Kiali resource configured in Step 2 needs to match this value.
    Note

    If there is only one mesh using user-workload monitoring, then both the mesh_id relabeling and the spec.prometheus.query_scope field in the Kiali resource are optional (but the query_scope field given here should be removed if the mesh_id label is removed).

    If multiple mesh instances on the cluster might use user-workload monitoring, then both the mesh_id relabelings and the spec.prometheus.query_scope field in the Kiali resource are required. This ensures that Kiali only sees metrics from its associated mesh.

    If you are not deploying Kiali, you can still apply mesh_id relabeling so that metrics from different meshes can be distinguished from one another.

  7. Apply a PodMonitor object to collect metrics from Istio proxies:

    apiVersion: monitoring.coreos.com/v1
    kind: PodMonitor
    metadata:
      name: istio-proxies-monitor
      namespace: istio-system 1
    spec:
      selector:
        matchExpressions:
        - key: istio-prometheus-ignore
          operator: DoesNotExist
      podMetricsEndpoints:
      - path: /stats/prometheus
        interval: 30s
        relabelings:
        - action: keep
          sourceLabels: [__meta_kubernetes_pod_container_name]
          regex: "istio-proxy"
        - action: keep
          sourceLabels: [__meta_kubernetes_pod_annotationpresent_prometheus_io_scrape]
        - action: replace
          regex: (\d+);(([A-Fa-f0-9]{1,4}::?){1,7}[A-Fa-f0-9]{1,4})
          replacement: '[$2]:$1'
          sourceLabels: [__meta_kubernetes_pod_annotation_prometheus_io_port,
          __meta_kubernetes_pod_ip]
          targetLabel: __address__
        - action: replace
          regex: (\d+);((([0-9]+?)(\.|$)){4})
          replacement: $2:$1
          sourceLabels: [__meta_kubernetes_pod_annotation_prometheus_io_port,
          __meta_kubernetes_pod_ip]
          targetLabel: __address__
        - action: labeldrop
          regex: "__meta_kubernetes_pod_label_(.+)"
        - sourceLabels: [__meta_kubernetes_namespace]
          action: replace
          targetLabel: namespace
        - sourceLabels: [__meta_kubernetes_pod_name]
          action: replace
          targetLabel: pod_name
        - action: replace
          replacement: "basic-istio-system" 2
          targetLabel: mesh_id
    1
    Since OpenShift Container Platform monitoring ignores the namespaceSelector spec in ServiceMonitor and PodMonitor objects, you must apply the PodMonitor object in all mesh namespaces, including the control plane namespace.
    2
    The string "basic-istio-system" is a combination of the SMCP name and its namespace, but any label can be used as long as it is unique for every mesh using user workload monitoring in the cluster. The spec.prometheus.query_scope of the Kiali resource configured in Step 2 needs to match this value.
    Note

    If there is only one mesh using user-workload monitoring, then both the mesh_id relabeling and the spec.prometheus.query_scope field in the Kiali resource are optional (but the query_scope field given here should be removed if the mesh_id label is removed).

    If multiple mesh instances on the cluster might use user-workload monitoring, then both the mesh_id relabelings and the spec.prometheus.query_scope field in the Kiali resource are required. This ensures that Kiali only sees metrics from its associated mesh.

    If you are not deploying Kiali, you can still apply mesh_id relabeling so that metrics from different meshes can be distinguished from one another.

  8. Open the OpenShift Container Platform web console, and check that metrics are visible.

2.17.9. Additional resources

2.18. Performance and scalability

The default ServiceMeshControlPlane settings are not intended for production use; they are designed to install successfully on a default OpenShift Container Platform installation, which is a resource-limited environment. After you have verified a successful SMCP installation, you should modify the settings defined within the SMCP to suit your environment.

2.18.2. Load test results

The upstream Istio community load tests mesh consists of 1000 services and 2000 sidecars with 70,000 mesh-wide requests per second. Running the tests using Istio 1.12.3, generated the following results:

  • The Envoy proxy uses 0.35 vCPU and 40 MB memory per 1000 requests per second going through the proxy.
  • Istiod uses 1 vCPU and 1.5 GB of memory.
  • The Envoy proxy adds 2.65 ms to the 90th percentile latency.
  • The legacy istio-telemetry service (disabled by default in Service Mesh 2.0) uses 0.6 vCPU per 1000 mesh-wide requests per second for deployments that use Mixer. The data plane components, the Envoy proxies, handle data flowing through the system. The Service Mesh control plane component, Istiod, configures the data plane. The data plane and control plane have distinct performance concerns.

2.18.2.1. Service Mesh Control plane performance

Istiod configures sidecar proxies based on user authored configuration files and the current state of the system. In a Kubernetes environment, Custom Resource Definitions (CRDs) and deployments constitute the configuration and state of the system. The Istio configuration objects like gateways and virtual services, provide the user-authored configuration. To produce the configuration for the proxies, Istiod processes the combined configuration and system state from the Kubernetes environment and the user-authored configuration.

The Service Mesh control plane supports thousands of services, spread across thousands of pods with a similar number of user authored virtual services and other configuration objects. Istiod’s CPU and memory requirements scale with the number of configurations and possible system states. The CPU consumption scales with the following factors:

  • The rate of deployment changes.
  • The rate of configuration changes.
  • The number of proxies connecting to Istiod.

However this part is inherently horizontally scalable.

2.18.2.2. Data plane performance

Data plane performance depends on many factors, for example:

  • Number of client connections
  • Target request rate
  • Request size and response size
  • Number of proxy worker threads
  • Protocol
  • CPU cores
  • Number and types of proxy filters, specifically telemetry v2 related filters.

The latency, throughput, and the proxies' CPU and memory consumption are measured as a function of these factors.

2.18.2.2.1. CPU and memory consumption

Since the sidecar proxy performs additional work on the data path, it consumes CPU and memory. As of Istio 1.12.3, a proxy consumes about 0.5 vCPU per 1000 requests per second.

The memory consumption of the proxy depends on the total configuration state the proxy holds. A large number of listeners, clusters, and routes can increase memory usage.

Since the proxy normally does not buffer the data passing through, request rate does not affect the memory consumption.

2.18.2.2.2. Additional latency

Since Istio injects a sidecar proxy on the data path, latency is an important consideration. Istio adds an authentication filter, a telemetry filter, and a metadata exchange filter to the proxy. Every additional filter adds to the path length inside the proxy and affects latency.

The Envoy proxy collects raw telemetry data after a response is sent to the client. The time spent collecting raw telemetry for a request does not contribute to the total time taken to complete that request. However, because the worker is busy handling the request, the worker does not start handling the next request immediately. This process adds to the queue wait time of the next request and affects average and tail latencies. The actual tail latency depends on the traffic pattern.

Inside the mesh, a request traverses the client-side proxy and then the server-side proxy. In the default configuration of Istio 1.12.3 (that is, Istio with telemetry v2), the two proxies add about 1.7 ms and 2.7 ms to the 90th and 99th percentile latency, respectively, over the baseline data plane latency.

2.19. Configuring Service Mesh for production

When you are ready to move from a basic installation to production, you must configure your control plane, tracing, and security certificates to meet production requirements.

Prerequisites

  • Install and configure Red Hat OpenShift Service Mesh.
  • Test your configuration in a staging environment.

2.19.1. Configuring your ServiceMeshControlPlane resource for production

If you have installed a basic ServiceMeshControlPlane resource to test Service Mesh, you must configure it to production specification before you use Red Hat OpenShift Service Mesh in production.

You cannot change the metadata.name field of an existing ServiceMeshControlPlane resource. For production deployments, you must customize the default template.

Procedure

  1. Configure the distributed tracing platform (Jaeger) for production.

    1. Edit the ServiceMeshControlPlane resource to use the production deployment strategy, by setting spec.addons.jaeger.install.storage.type to Elasticsearch and specify additional configuration options under install. You can create and configure your Jaeger instance and set spec.addons.jaeger.name to the name of the Jaeger instance.

      Default Jaeger parameters including Elasticsearch

      apiVersion: maistra.io/v2
      kind: ServiceMeshControlPlane
      metadata:
        name: basic
      spec:
        version: v2.6
        tracing:
          sampling: 100
          type: Jaeger
        addons:
          jaeger:
            name: MyJaeger
            install:
              storage:
                type: Elasticsearch
              ingress:
                enabled: true
        runtime:
          components:
            tracing.jaeger.elasticsearch: # only supports resources and image name
              container:
                resources: {}

    2. Configure the sampling rate for production. For more information, see the Performance and scalability section.
  2. Ensure your security certificates are production ready by installing security certificates from an external certificate authority. For more information, see the Security section.

Verification

  1. Enter the following command to verify that the ServiceMeshControlPlane resource updated properly. In this example, basic is the name of the ServiceMeshControlPlane resource.

    $ oc get smcp basic -o yaml

2.19.2. Additional resources

2.20. Connecting service meshes

Federation is a deployment model that lets you share services and workloads between separate meshes managed in distinct administrative domains.

2.20.1. Federation overview

Federation is a set of features that let you connect services between separate meshes, allowing the use of Service Mesh features such as authentication, authorization, and traffic management across multiple, distinct administrative domains.

Implementing a federated mesh lets you run, manage, and observe a single service mesh running across multiple OpenShift clusters. Red Hat OpenShift Service Mesh federation takes an opinionated approach to a multi-cluster implementation of Service Mesh that assumes minimal trust between meshes.

Service Mesh federation assumes that each mesh is managed individually and retains its own administrator. The default behavior is that no communication is permitted and no information is shared between meshes. The sharing of information between meshes is on an explicit opt-in basis. Nothing is shared in a federated mesh unless it has been configured for sharing. Support functions such as certificate generation, metrics and trace collection remain local in their respective meshes.

You configure the ServiceMeshControlPlane on each service mesh to create ingress and egress gateways specifically for the federation, and to specify the trust domain for the mesh.

Federation also involves the creation of additional federation files. The following resources are used to configure the federation between two or more meshes.

  • A ServiceMeshPeer resource declares the federation between a pair of service meshes.
  • An ExportedServiceSet resource declares that one or more services from the mesh are available for use by a peer mesh.
  • An ImportedServiceSet resource declares which services exported by a peer mesh will be imported into the mesh.

2.20.2. Federation features

Features of the Red Hat OpenShift Service Mesh federated approach to joining meshes include the following:

  • Supports common root certificates for each mesh.
  • Supports different root certificates for each mesh.
  • Mesh administrators must manually configure certificate chains, service discovery endpoints, trust domains, etc for meshes outside of the Federated mesh.
  • Only export/import the services that you want to share between meshes.

    • Defaults to not sharing information about deployed workloads with other meshes in the federation. A service can be exported to make it visible to other meshes and allow requests from workloads outside of its own mesh.
    • A service that has been exported can be imported to another mesh, enabling workloads on that mesh to send requests to the imported service.
  • Encrypts communication between meshes at all times.
  • Supports configuring load balancing across workloads deployed locally and workloads that are deployed in another mesh in the federation.

When a mesh is joined to another mesh it can do the following:

  • Provide trust details about itself to the federated mesh.
  • Discover trust details about the federated mesh.
  • Provide information to the federated mesh about its own exported services.
  • Discover information about services exported by the federated mesh.

2.20.3. Federation security

Red Hat OpenShift Service Mesh federation takes an opinionated approach to a multi-cluster implementation of Service Mesh that assumes minimal trust between meshes. Data security is built in as part of the federation features.

  • Each mesh is considered to be a unique tenant, with a unique administration.
  • You create a unique trust domain for each mesh in the federation.
  • Traffic between the federated meshes is automatically encrypted using mutual Transport Layer Security (mTLS).
  • The Kiali graph only displays your mesh and services that you have imported. You cannot see the other mesh or services that have not been imported into your mesh.

2.20.4. Federation limitations

The Red Hat OpenShift Service Mesh federated approach to joining meshes has the following limitations:

  • Federation of meshes is not supported on OpenShift Dedicated.

2.20.5. Federation prerequisites

The Red Hat OpenShift Service Mesh federated approach to joining meshes has the following prerequisites:

  • Two or more OpenShift Container Platform 4.6 or above clusters.
  • Federation was introduced in Red Hat OpenShift Service Mesh 2.1 or later. You must have the Red Hat OpenShift Service Mesh 2.1 or later Operator installed on each mesh that you want to federate.
  • You must have a version 2.1 or later ServiceMeshControlPlane deployed on each mesh that you want to federate.
  • You must configure the load balancers supporting the services associated with the federation gateways to support raw TLS traffic. Federation traffic consists of HTTPS for discovery and raw encrypted TCP for service traffic.
  • Services that you want to expose to another mesh should be deployed before you can export and import them. However, this is not a strict requirement. You can specify service names that do not yet exist for export/import. When you deploy the services named in the ExportedServiceSet and ImportedServiceSet they will be automatically made available for export/import.

2.20.6. Planning your mesh federation

Before you start configuring your mesh federation, you should take some time to plan your implementation.

  • How many meshes do you plan to join in a federation? You probably want to start with a limited number of meshes, perhaps two or three.
  • What naming convention do you plan to use for each mesh? Having a pre-defined naming convention will help with configuration and troubleshooting. The examples in this documentation use different colors for each mesh. You should decide on a naming convention that will help you determine who owns and manages each mesh, as well as the following federation resources:

    • Cluster names
    • Cluster network names
    • Mesh names and namespaces
    • Federation ingress gateways
    • Federation egress gateways
    • Security trust domains

      Note

      Each mesh in the federation must have its own unique trust domain.

  • Which services from each mesh do you plan to export to the federated mesh? Each service can be exported individually, or you can specify labels or use wildcards.

    • Do you want to use aliases for the service namespaces?
    • Do you want to use aliases for the exported services?
  • Which exported services does each mesh plan to import? Each mesh only imports the services that it needs.

    • Do you want to use aliases for the imported services?

2.20.7. Mesh federation across clusters

To connect one instance of the OpenShift Service Mesh with one running in a different cluster, the procedure is not much different as when connecting two meshes deployed in the same cluster. However, the ingress gateway of one mesh must be reachable from the other mesh. One way of ensuring this is to configure the gateway service as a LoadBalancer service if the cluster supports this type of service.

The service must be exposed through a load balancer that operates at Layer4 of the OSI model.

2.20.7.1. Exposing the federation ingress on clusters running on bare metal

If the cluster runs on bare metal and fully supports LoadBalancer services, the IP address found in the .status.loadBalancer.ingress.ip field of the ingress gateway Service object should be specified as one of the entries in the .spec.remote.addresses field of the ServiceMeshPeer object.

If the cluster does not support LoadBalancer services, using a NodePort service could be an option if the nodes are accessible from the cluster running the other mesh. In the ServiceMeshPeer object, specify the IP addresses of the nodes in the .spec.remote.addresses field and the service’s node ports in the .spec.remote.discoveryPort and .spec.remote.servicePort fields.

2.20.7.2. Exposing the federation ingress on clusters running on IBM Power and IBM Z

If the cluster runs on IBM Power® or IBM Z® infrastructure and fully supports LoadBalancer services, the IP address found in the .status.loadBalancer.ingress.ip field of the ingress gateway Service object should be specified as one of the entries in the .spec.remote.addresses field of the ServiceMeshPeer object.

If the cluster does not support LoadBalancer services, using a NodePort service could be an option if the nodes are accessible from the cluster running the other mesh. In the ServiceMeshPeer object, specify the IP addresses of the nodes in the .spec.remote.addresses field and the service’s node ports in the .spec.remote.discoveryPort and .spec.remote.servicePort fields.

2.20.7.3. Exposing the federation ingress on Amazon Web Services (AWS)

By default, LoadBalancer services in clusters running on AWS do not support L4 load balancing. In order for Red Hat OpenShift Service Mesh federation to operate correctly, the following annotation must be added to the ingress gateway service:

service.beta.kubernetes.io/aws-load-balancer-type: nlb

The Fully Qualified Domain Name found in the .status.loadBalancer.ingress.hostname field of the ingress gateway Service object should be specified as one of the entries in the .spec.remote.addresses field of the ServiceMeshPeer object.

2.20.7.4. Exposing the federation ingress on Azure

On Microsoft Azure, merely setting the service type to LoadBalancer suffices for mesh federation to operate correctly.

The IP address found in the .status.loadBalancer.ingress.ip field of the ingress gateway Service object should be specified as one of the entries in the .spec.remote.addresses field of the ServiceMeshPeer object.

2.20.7.5. Exposing the federation ingress on Google Cloud Platform (GCP)

On Google Cloud Platform, merely setting the service type to LoadBalancer suffices for mesh federation to operate correctly.

The IP address found in the .status.loadBalancer.ingress.ip field of the ingress gateway Service object should be specified as one of the entries in the .spec.remote.addresses field of the ServiceMeshPeer object.

2.20.8. Federation implementation checklist

Federating services meshes involves the following activities:

  • ❏ Configure networking between the clusters that you are going to federate.

    • ❏ Configure the load balancers supporting the services associated with the federation gateways to support raw TLS traffic.
  • ❏ Installing the Red Hat OpenShift Service Mesh version 2.1 or later Operator in each of your clusters.
  • ❏ Deploying a version 2.1 or later ServiceMeshControlPlane to each of your clusters.
  • ❏ Configuring the SMCP for federation for each mesh that you want to federate:

    • ❏ Create a federation egress gateway for each mesh you are going to federate with.
    • ❏ Create a federation ingress gateway for each mesh you are going to federate with.
    • ❏ Configure a unique trust domain.
  • ❏ Federate two or more meshes by creating a ServiceMeshPeer resource for each mesh pair.
  • ❏ Export services by creating an ExportedServiceSet resource to make services available from one mesh to a peer mesh.
  • ❏ Import services by creating an ImportedServiceSet resource to import services shared by a mesh peer.

2.20.9. Configuring a Service Mesh control plane for federation

Before a mesh can be federated, you must configure the ServiceMeshControlPlane for mesh federation. Because all meshes that are members of the federation are equal, and each mesh is managed independently, you must configure the SMCP for each mesh that will participate in the federation.

In the following example, the administrator for the red-mesh is configuring the SMCP for federation with both the green-mesh and the blue-mesh.

Sample SMCP for red-mesh

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: red-mesh
  namespace: red-mesh-system
spec:
  version: v2.6
  runtime:
    defaults:
      container:
        imagePullPolicy: Always
  gateways:
    additionalEgress:
      egress-green-mesh:
        enabled: true
        requestedNetworkView:
        - green-network
        service:
          metadata:
            labels:
              federation.maistra.io/egress-for: egress-green-mesh
          ports:
          - port: 15443
            name: tls
          - port: 8188
            name: http-discovery  #note HTTP here
      egress-blue-mesh:
        enabled: true
        requestedNetworkView:
        - blue-network
        service:
          metadata:
            labels:
              federation.maistra.io/egress-for: egress-blue-mesh
          ports:
          - port: 15443
            name: tls
          - port: 8188
            name: http-discovery  #note HTTP here
    additionalIngress:
      ingress-green-mesh:
        enabled: true
        service:
          type: LoadBalancer
          metadata:
            labels:
              federation.maistra.io/ingress-for: ingress-green-mesh
          ports:
          - port: 15443
            name: tls
          - port: 8188
            name: https-discovery  #note HTTPS here
      ingress-blue-mesh:
        enabled: true
        service:
          type: LoadBalancer
          metadata:
            labels:
              federation.maistra.io/ingress-for: ingress-blue-mesh
          ports:
          - port: 15443
            name: tls
          - port: 8188
            name: https-discovery  #note HTTPS here
  security:
    trust:
      domain: red-mesh.local

Table 2.6. ServiceMeshControlPlane federation configuration parameters
ParameterDescriptionValuesDefault value
spec:
  cluster:
    name:

Name of the cluster. You are not required to specify a cluster name, but it is helpful for troubleshooting.

String

N/A

spec:
  cluster:
    network:

Name of the cluster network. You are not required to specify a name for the network, but it is helpful for configuration and troubleshooting.

String

N/A

2.20.9.1. Understanding federation gateways

You use a gateway to manage inbound and outbound traffic for your mesh, letting you specify which traffic you want to enter or leave the mesh.

You use ingress and egress gateways to manage traffic entering and leaving the service mesh (North-South traffic). When you create a federated mesh, you create additional ingress/egress gateways, to facilitate service discovery between federated meshes, communication between federated meshes, and to manage traffic flow between service meshes (East-West traffic).

To avoid naming conflicts between meshes, you must create separate egress and ingress gateways for each mesh. For example, red-mesh would have separate egress gateways for traffic going to green-mesh and blue-mesh.

Table 2.7. Federation gateway parameters
ParameterDescriptionValuesDefault value
spec:
  gateways:
    additionalEgress:
      <egress_name>:

Define an additional egress gateway for each mesh peer in the federation.

  
spec:
  gateways:
    additionalEgress:
      <egress_name>:
        enabled:

This parameter enables or disables the federation egress.

true/false

true

spec:
  gateways:
    additionalEgress:
      <egress_name>:
        requestedNetworkView:

Networks associated with exported services.

Set to the value of spec.cluster.network in the SMCP for the mesh, otherwise use <ServiceMeshPeer-name>-network. For example, if the ServiceMeshPeer resource for that mesh is named west, then the network would be named west-network.

 
spec:
  gateways:
    additionalEgress:
      <egress_name>:
        service:
          metadata:
            labels:
              federation.maistra.io/egress-for:

Specify a unique label for the gateway to prevent federated traffic from flowing through the cluster’s default system gateways.

  
spec:
  gateways:
    additionalEgress:
      <egress_name>:
        service:
          ports:

Used to specify the port: and name: used for TLS and service discovery. Federation traffic consists of raw encrypted TCP for service traffic.

Port 15443 is required for sending TLS service requests to other meshes in the federation. Port 8188 is required for sending service discovery requests to other meshes in the federation.

 
spec:
  gateways:
    additionalIngress:

Define an additional ingress gateway gateway for each mesh peer in the federation.

  
spec:
  gateways:
    additionalIgress:
      <ingress_name>:
        enabled:

This parameter enables or disables the federation ingress.

true/false

true

spec:
  gateways:
    additionalIngress:
      <ingress_name>:
        service:
          type:

The ingress gateway service must be exposed through a load balancer that operates at Layer 4 of the OSI model and is publicly available.

LoadBalancer

 
spec:
  gateways:
    additionalIngress:
      <ingress_name>:
        service:
          type:

If the cluster does not support LoadBalancer services, the ingress gateway service can be exposed through a NodePort service.

NodePort

 
spec:
  gateways:
    additionalIngress:
      <ingress_name>:
        service:
          metadata:
            labels:
              federation.maistra.io/ingress-for:

Specify a unique label for the gateway to prevent federated traffic from flowing through the cluster’s default system gateways.

  
spec:
  gateways:
    additionalIngress:
      <ingress_name>:
        service:
          ports:

Used to specify the port: and name: used for TLS and service discovery. Federation traffic consists of raw encrypted TCP for service traffic. Federation traffic consists of HTTPS for discovery.

Port 15443 is required for receiving TLS service requests to other meshes in the federation. Port 8188 is required for receiving service discovery requests to other meshes in the federation.

 
spec:
  gateways:
    additionalIngress:
      <ingress_name>:
        service:
          ports:
            nodePort:

Used to specify the nodePort: if the cluster does not support LoadBalancer services.

If specified, is required in addition to port: and name: for both TLS and service discovery. nodePort: must be in the range 30000-32767.

 

In the following example, the administrator is configuring the SMCP for federation with the green-mesh using a NodePort service.

Sample SMCP for NodePort

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: green-mesh
  namespace: green-mesh-system
spec:
# ...
  gateways:
     additionalIngress:
      ingress-green-mesh:
        enabled: true
        service:
          type: NodePort
          metadata:
            labels:
              federation.maistra.io/ingress-for: ingress-green-mesh
          ports:
          - port: 15443
            nodePort: 30510
            name: tls
          - port: 8188
            nodePort: 32359
            name: https-discovery

2.20.9.2. Understanding federation trust domain parameters

Each mesh in the federation must have its own unique trust domain. This value is used when configuring mesh federation in the ServiceMeshPeer resource.

kind: ServiceMeshControlPlane
metadata:
  name: red-mesh
  namespace: red-mesh-system
spec:
  security:
    trust:
      domain: red-mesh.local
Table 2.8. Federation security parameters
ParameterDescriptionValuesDefault value
spec:
  security:
    trust:
      domain:

Used to specify a unique name for the trust domain for the mesh. Domains must be unique for every mesh in the federation.

<mesh-name>.local

N/A

Procedure from the Console

Follow this procedure to edit the ServiceMeshControlPlane with the OpenShift Container Platform web console. This example uses the red-mesh as an example.

  1. Log in to the OpenShift Container Platform web console as a user with the cluster-admin role.
  2. Navigate to Operators Installed Operators.
  3. Click the Project menu and select the project where you installed the Service Mesh control plane. For example, red-mesh-system.
  4. Click the Red Hat OpenShift Service Mesh Operator.
  5. On the Istio Service Mesh Control Plane tab, click the name of your ServiceMeshControlPlane, for example red-mesh.
  6. On the Create ServiceMeshControlPlane Details page, click YAML to modify your configuration.
  7. Modify your ServiceMeshControlPlane to add federation ingress and egress gateways and to specify the trust domain.
  8. Click Save.

Procedure from the CLI

Follow this procedure to create or edit the ServiceMeshControlPlane with the command line. This example uses the red-mesh as an example.

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane, for example red-mesh-system.

    $ oc project red-mesh-system
  3. Edit the ServiceMeshControlPlane file to add federation ingress and egress gateways and to specify the trust domain.
  4. Run the following command to edit the Service Mesh control plane where red-mesh-system is the system namespace and red-mesh is the name of the ServiceMeshControlPlane object:

    $ oc edit -n red-mesh-system smcp red-mesh
  5. Enter the following command, where red-mesh-system is the system namespace, to see the status of the Service Mesh control plane installation.

    $ oc get smcp -n red-mesh-system

    The installation has finished successfully when the READY column indicates that all components are ready.

    NAME       READY   STATUS            PROFILES      VERSION   AGE
    red-mesh   10/10   ComponentsReady   ["default"]   2.1.0     4m25s

2.20.10. Joining a federated mesh

You declare the federation between two meshes by creating a ServiceMeshPeer resource. The ServiceMeshPeer resource defines the federation between two meshes, and you use it to configure discovery for the peer mesh, access to the peer mesh, and certificates used to validate the other mesh’s clients.

Service Mesh federated mesh peers illustration

Meshes are federated on a one-to-one basis, so each pair of peers requires a pair of ServiceMeshPeer resources specifying the federation connection to the other service mesh. For example, federating two meshes named red and green would require two ServiceMeshPeer files.

  1. On red-mesh-system, create a ServiceMeshPeer for the green mesh.
  2. On green-mesh-system, create a ServiceMeshPeer for the red mesh.

Federating three meshes named red, blue, and green would require six ServiceMeshPeer files.

  1. On red-mesh-system, create a ServiceMeshPeer for the green mesh.
  2. On red-mesh-system, create a ServiceMeshPeer for the blue mesh.
  3. On green-mesh-system, create a ServiceMeshPeer for the red mesh.
  4. On green-mesh-system, create a ServiceMeshPeer for the blue mesh.
  5. On blue-mesh-system, create a ServiceMeshPeer for the red mesh.
  6. On blue-mesh-system, create a ServiceMeshPeer for the green mesh.

Configuration in the ServiceMeshPeer resource includes the following:

  • The address of the other mesh’s ingress gateway, which is used for discovery and service requests.
  • The names of the local ingress and egress gateways that is used for interactions with the specified peer mesh.
  • The client ID used by the other mesh when sending requests to this mesh.
  • The trust domain used by the other mesh.
  • The name of a ConfigMap containing a root certificate that is used to validate client certificates in the trust domain used by the other mesh.

In the following example, the administrator for the red-mesh is configuring federation with the green-mesh.

Example ServiceMeshPeer resource for red-mesh

kind: ServiceMeshPeer
apiVersion: federation.maistra.io/v1
metadata:
  name: green-mesh
  namespace: red-mesh-system
spec:
  remote:
    addresses:
    - ingress-red-mesh.green-mesh-system.apps.domain.com
  gateways:
    ingress:
      name: ingress-green-mesh
    egress:
      name: egress-green-mesh
  security:
    trustDomain: green-mesh.local
    clientID: green-mesh.local/ns/green-mesh-system/sa/egress-red-mesh-service-account
    certificateChain:
      kind: ConfigMap
      name: green-mesh-ca-root-cert

Table 2.9. ServiceMeshPeer configuration parameters
ParameterDescriptionValues
metadata:
  name:

Name of the peer mesh that this resource is configuring federation with.

String

metadata:
  namespace:

System namespace for this mesh, that is, where the Service Mesh control plane is installed.

String

spec:
  remote:
    addresses:

List of public addresses of the peer meshes' ingress gateways that are servicing requests from this mesh.

 
spec:
  remote:
    discoveryPort:

The port on which the addresses are handling discovery requests.

Defaults to 8188

spec:
  remote:
    servicePort:

The port on which the addresses are handling service requests.

Defaults to 15443

spec:
  gateways:
    ingress:
      name:

Name of the ingress on this mesh that is servicing requests received from the peer mesh. For example, ingress-green-mesh.

 
spec:
  gateways:
    egress:
      name:

Name of the egress on this mesh that is servicing requests sent to the peer mesh. For example, egress-green-mesh.

 
spec:
  security:
    trustDomain:

The trust domain used by the peer mesh.

<peerMeshName>.local

spec:
  security:
    clientID:

The client ID used by the peer mesh when calling into this mesh.

<peerMeshTrustDomain>/ns/<peerMeshSystem>/sa/<peerMeshEgressGatewayName>-service-account

spec:
  security:
    certificateChain:
      kind: ConfigMap
      name:

The kind (for example, ConfigMap) and name of a resource containing the root certificate used to validate the client and server certificate(s) presented to this mesh by the peer mesh. The key of the config map entry containing the certificate should be root-cert.pem.

kind: ConfigMap name: <peerMesh>-ca-root-cert

2.20.10.1. Creating a ServiceMeshPeer resource

Prerequisites

  • Two or more OpenShift Container Platform 4.6 or above clusters.
  • The clusters must already be networked.
  • The load balancers supporting the services associated with the federation gateways must be configured to support raw TLS traffic.
  • Each cluster must have a version 2.1 or later ServiceMeshControlPlane configured to support federation deployed.
  • An account with the cluster-admin role.

Procedure from the CLI

Follow this procedure to create a ServiceMeshPeer resource from the command line. This example shows the red-mesh creating a peer resource for the green-mesh.

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> <API token> https://<HOSTNAME>:6443
  2. Change to the project where you installed the control plane, for example, red-mesh-system.

    $ oc project red-mesh-system
  3. Create a ServiceMeshPeer file based the following example for the two meshes that you want to federate.

    Example ServiceMeshPeer resource for red-mesh to green-mesh

    kind: ServiceMeshPeer
    apiVersion: federation.maistra.io/v1
    metadata:
      name: green-mesh
      namespace: red-mesh-system
    spec:
      remote:
        addresses:
        - ingress-red-mesh.green-mesh-system.apps.domain.com
      gateways:
        ingress:
          name: ingress-green-mesh
        egress:
          name: egress-green-mesh
      security:
        trustDomain: green-mesh.local
        clientID: green-mesh.local/ns/green-mesh-system/sa/egress-red-mesh-service-account
        certificateChain:
          kind: ConfigMap
          name: green-mesh-ca-root-cert

  4. Run the following command to deploy the resource, where red-mesh-system is the system namespace and servicemeshpeer.yaml includes a full path to the file you edited:

    $ oc create -n red-mesh-system -f servicemeshpeer.yaml
  5. To confirm that connection between the red mesh and green mesh is established, inspect the status of the green-mesh ServiceMeshPeer in the red-mesh-system namespace:

    $ oc -n red-mesh-system get servicemeshpeer green-mesh -o yaml

    Example ServiceMeshPeer connection between red-mesh and green-mesh

    status:
      discoveryStatus:
        active:
        - pod: istiod-red-mesh-b65457658-9wq5j
          remotes:
          - connected: true
            lastConnected: "2021-10-05T13:02:25Z"
            lastFullSync: "2021-10-05T13:02:25Z"
            source: 10.128.2.149
          watch:
            connected: true
            lastConnected: "2021-10-05T13:02:55Z"
            lastDisconnectStatus: 503 Service Unavailable
            lastFullSync: "2021-10-05T13:05:43Z"

    The status.discoveryStatus.active.remotes field shows that istiod in the peer mesh (in this example, the green mesh) is connected to istiod in the current mesh (in this example, the red mesh).

    The status.discoveryStatus.active.watch field shows that istiod in the current mesh is connected to istiod in the peer mesh.

    If you check the servicemeshpeer named red-mesh in green-mesh-system, you can find information about the same two connections from the perspective of the green mesh.

    When the connection between two meshes is not established, the ServiceMeshPeer status indicates this in the status.discoveryStatus.inactive field.

    For more information on why a connection attempt failed, inspect the Istiod log, the access log of the egress gateway handling egress traffic for the peer, and the ingress gateway handling ingress traffic for the current mesh in the peer mesh.

    For example, if the red mesh cannot connect to the green mesh, check the following logs:

    • istiod-red-mesh in red-mesh-system
    • egress-green-mesh in red-mesh-system
    • ingress-red-mesh in green-mesh-system

2.20.11. Exporting a service from a federated mesh

Exporting services allows a mesh to share one or more of its services with another member of the federated mesh.

Service Mesh federation exporting service illustration

You use an ExportedServiceSet resource to declare the services from one mesh that you are making available to another peer in the federated mesh. You must explicitly declare each service to be shared with a peer.

  • You can select services by namespace or name.
  • You can use wildcards to select services; for example, to export all the services in a namespace.
  • You can export services using an alias. For example, you can export the foo/bar service as custom-ns/bar.
  • You can only export services that are visible to the mesh’s system namespace. For example, a service in another namespace with a networking.istio.io/exportTo label set to ‘.’ would not be a candidate for export.
  • For exported services, their target services will only see traffic from the ingress gateway, not the original requestor (that is, they won’t see the client ID of either the other mesh’s egress gateway or the workload originating the request)

The following example is for services that red-mesh is exporting to green-mesh.

Example ExportedServiceSet resource

kind: ExportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: green-mesh
  namespace: red-mesh-system
spec:
  exportRules:
  # export ratings.mesh-x-bookinfo as ratings.bookinfo
  - type: NameSelector
    nameSelector:
      namespace: red-mesh-bookinfo
      name: red-ratings
      alias:
        namespace: bookinfo
        name: ratings
  # export any service in red-mesh-bookinfo namespace with label export-service=true
  - type: LabelSelector
    labelSelector:
      namespace: red-mesh-bookinfo
      selector:
        matchLabels:
          export-service: "true"
      aliases: # export all matching services as if they were in the bookinfo namespace
      - namespace: "*"
        name: "*"
        alias:
          namespace: bookinfo

Table 2.10. ExportedServiceSet parameters
ParameterDescriptionValues
metadata:
  name:

Name of the ServiceMeshPeer you are exposing this service to.

Must match the name value for the mesh in the ServiceMeshPeer resource.

metadata:
  namespace:

Name of the project/namespace containing this resource (should be the system namespace for the mesh) .

 
spec:
  exportRules:
  - type:

Type of rule that will govern the export for this service. The first matching rule found for the service will be used for the export.

NameSelector, LabelSelector

spec:
  exportRules:
  - type: NameSelector
    nameSelector:
      namespace:
      name:

To create a NameSelector rule, specify the namespace of the service and the name of the service as defined in the Service resource.

 
spec:
  exportRules:
  - type: NameSelector
    nameSelector:
      alias:
        namespace:
        name:

To create a NameSelector rule that uses an alias for the service, after specifying the namespace and name for the service, then specify the alias for the namespace and the alias to be used for name of the service.

 
spec:
  exportRules:
  - type: LabelSelector
    labelSelector:
      namespace: <exportingMesh>
      selector:
        matchLabels:
          <labelKey>: <labelValue>

To create a LabelSelector rule, specify the namespace of the service and specify the label defined in the Service resource. In the example above, the label is export-service.

 
spec:
  exportRules:
  - type: LabelSelector
    labelSelector:
      namespace: <exportingMesh>
      selector:
        matchLabels:
          <labelKey>: <labelValue>
      aliases:
      - namespace:
        name:
        alias:
          namespace:
          name:

To create a LabelSelector rule that uses aliases for the services, after specifying the selector, specify the aliases to be used for name or namespace of the service. In the example above, the namespace alias is bookinfo for all matching services.

 

Export services with the name "ratings" from all namespaces in the red-mesh to blue-mesh.

kind: ExportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: blue-mesh
  namespace: red-mesh-system
spec:
  exportRules:
  - type: NameSelector
    nameSelector:
      namespace: "*"
      name: ratings

Export all services from the west-data-center namespace to green-mesh

kind: ExportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: green-mesh
  namespace: red-mesh-system
spec:
  exportRules:
  - type: NameSelector
    nameSelector:
      namespace: west-data-center
      name: "*"

2.20.11.1. Creating an ExportedServiceSet

You create an ExportedServiceSet resource to explicitly declare the services that you want to be available to a mesh peer.

Services are exported as <export-name>.<export-namespace>.svc.<ServiceMeshPeer.name>-exports.local and will automatically route to the target service. This is the name by which the exported service is known in the exporting mesh. When the ingress gateway receives a request destined for this name, it will be routed to the actual service being exported. For example, if a service named ratings.red-mesh-bookinfo is exported to green-mesh as ratings.bookinfo, the service will be exported under the name ratings.bookinfo.svc.green-mesh-exports.local, and traffic received by the ingress gateway for that hostname will be routed to the ratings.red-mesh-bookinfo service.

Note

When you set the importAsLocal parameter to true to aggregate the remote endpoint with local services, you must use an alias for the service. When you set the parameter false, no alias is required.

Prerequisites

  • The cluster and ServiceMeshControlPlane have been configured for mesh federation.
  • An account with the cluster-admin role.
Note

You can configure services for export even if they do not exist yet. When a service that matches the value specified in the ExportedServiceSet is deployed, it will be automatically exported.

Procedure from the CLI

Follow this procedure to create an ExportedServiceSet from the command line.

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> <API token> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane; for example, red-mesh-system.

    $ oc project red-mesh-system
  3. Create an ExportedServiceSet file based on the following example where red-mesh is exporting services to green-mesh.

    Example ExportedServiceSet resource from red-mesh to green-mesh

    apiVersion: federation.maistra.io/v1
    kind: ExportedServiceSet
    metadata:
      name: green-mesh
      namespace: red-mesh-system
    spec:
      exportRules:
      - type: NameSelector
        nameSelector:
          namespace: red-mesh-bookinfo
          name: ratings
          alias:
            namespace: bookinfo
            name: red-ratings
      - type: NameSelector
        nameSelector:
          namespace: red-mesh-bookinfo
          name: reviews

  4. Run the following command to upload and create the ExportedServiceSet resource in the red-mesh-system namespace.

    $ oc create -n <ControlPlaneNamespace> -f <ExportedServiceSet.yaml>

    For example:

    $ oc create -n red-mesh-system -f export-to-green-mesh.yaml
  5. Create additional ExportedServiceSets as needed for each mesh peer in your federated mesh.

Verification

  • Run the following command to validate the services the red-mesh exports to share with green-mesh:

    $ oc get exportedserviceset <PeerMeshExportedTo> -o yaml

    For example:

    $ oc -n red-mesh-system get exportedserviceset green-mesh -o yaml

    Example validating the services exported from the red mesh that are shared with the green mesh.

      status:
        exportedServices:
        - exportedName: red-ratings.bookinfo.svc.green-mesh-exports.local
          localService:
            hostname: ratings.red-mesh-bookinfo.svc.cluster.local
            name: ratings
            namespace: red-mesh-bookinfo
        - exportedName: reviews.red-mesh-bookinfo.svc.green-mesh-exports.local
          localService:
            hostname: reviews.red-mesh-bookinfo.svc.cluster.local
            name: reviews
            namespace: red-mesh-bookinfo

    The status.exportedServices array lists the services that are currently exported (these services matched the export rules in the ExportedServiceSet object). Each entry in the array indicates the name of the exported service and details about the local service that is exported.

    If a service that you expected to be exported is missing, confirm the Service object exists, its name or labels match the exportRules defined in the ExportedServiceSet object, and that the Service object’s namespace is configured as a member of the service mesh using the ServiceMeshMemberRoll or ServiceMeshMember object.

2.20.12. Importing a service into a federated mesh

Importing services lets you explicitly specify which services exported from another mesh should be accessible within your service mesh.

Service Mesh federation importing service illustration

You use an ImportedServiceSet resource to select services for import. Only services exported by a mesh peer and explicitly imported are available to the mesh. Services that you do not explicitly import are not made available within the mesh.

  • You can select services by namespace or name.
  • You can use wildcards to select services, for example, to import all the services that were exported to the namespace.
  • You can select services for export using a label selector, which may be global to the mesh, or scoped to a specific member namespace.
  • You can import services using an alias. For example, you can import the custom-ns/bar service as other-mesh/bar.
  • You can specify a custom domain suffix, which will be appended to the name.namespace of an imported service for its fully qualified domain name; for example, bar.other-mesh.imported.local.

The following example is for the green-mesh importing a service that was exported by red-mesh.

Example ImportedServiceSet

kind: ImportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: red-mesh #name of mesh that exported the service
  namespace: green-mesh-system #mesh namespace that service is being imported into
spec:
  importRules: # first matching rule is used
  # import ratings.bookinfo as ratings.bookinfo
  - type: NameSelector
    importAsLocal: false
    nameSelector:
      namespace: bookinfo
      name: ratings
      alias:
        # service will be imported as ratings.bookinfo.svc.red-mesh-imports.local
        namespace: bookinfo
        name: ratings

Table 2.11. ImportedServiceSet parameters
ParameterDescriptionValues
metadata:
  name:

Name of the ServiceMeshPeer that exported the service to the federated mesh.

 
metadata:
  namespace:

Name of the namespace containing the ServiceMeshPeer resource (the mesh system namespace).

 
spec:
  importRules:
  - type:

Type of rule that will govern the import for the service. The first matching rule found for the service will be used for the import.

NameSelector

spec:
  importRules:
  - type: NameSelector
    nameSelector:
      namespace:
      name:

To create a NameSelector rule, specify the namespace and the name of the exported service.

 
spec:
  importRules:
  - type: NameSelector
    importAsLocal:

Set to true to aggregate remote endpoint with local services. When true services are imported as <name>.<namespace>.svc.cluster.local. When true, an alias is required. When false, no alias is required.

true/false

spec:
  importRules:
  - type: NameSelector
    nameSelector:
      namespace:
      name:
      alias:
        namespace:
        name:

To create a NameSelector rule that uses an alias for the service, after specifying the namespace and name for the service, then specify the alias for the namespace and the alias to be used for name of the service.

 

Import the "bookinfo/ratings" service from the red-mesh into blue-mesh

kind: ImportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: red-mesh
  namespace: blue-mesh-system
spec:
  importRules:
  - type: NameSelector
    importAsLocal: false
    nameSelector:
      namespace: bookinfo
      name: ratings

Import all services from the red-mesh’s west-data-center namespace into the green-mesh. These services will be accessible as <name>.west-data-center.svc.red-mesh-imports.local

kind: ImportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: red-mesh
  namespace: green-mesh-system
spec:
  importRules:
  - type: NameSelector
    importAsLocal: false
    nameSelector:
      namespace: west-data-center
      name: "*"

2.20.12.1. Creating an ImportedServiceSet

You create an ImportedServiceSet resource to explicitly declare the services that you want to import into your mesh.

Services are imported with the name <exported-name>.<exported-namespace>.svc.<ServiceMeshPeer.name>.remote which is a "hidden" service, visible only within the egress gateway namespace and is associated with the exported service’s hostname. The service will be available locally as <export-name>.<export-namespace>.<domainSuffix>, where domainSuffix is svc.<ServiceMeshPeer.name>-imports.local by default, unless importAsLocal is set to true, in which case domainSuffix is svc.cluster.local. If importAsLocal is set to false, the domain suffix in the import rule will be applied. You can treat the local import just like any other service in the mesh. It automatically routes through the egress gateway, where it is redirected to the exported service’s remote name.

Prerequisites

  • The cluster and ServiceMeshControlPlane have been configured for mesh federation.
  • An account with the cluster-admin role.
Note

You can configure services for import even if they have not been exported yet. When a service that matches the value specified in the ImportedServiceSet is deployed and exported, it will be automatically imported.

Procedure

Follow this procedure to create an ImportedServiceSet from the command line.

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> <API token> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane; for example, green-mesh-system.

    $ oc project green-mesh-system
  3. Create an ImportedServiceSet file based on the following example where green-mesh is importing services previously exported by red-mesh.

    Example ImportedServiceSet resource from red-mesh to green-mesh

    kind: ImportedServiceSet
    apiVersion: federation.maistra.io/v1
    metadata:
      name: red-mesh
      namespace: green-mesh-system
    spec:
      importRules:
      - type: NameSelector
        importAsLocal: false
        nameSelector:
          namespace: bookinfo
          name: red-ratings
          alias:
            namespace: bookinfo
            name: ratings

  4. Run the following command to upload and create the ImportedServiceSet resource in the green-mesh-system namespace.

    $ oc create -n <ControlPlaneNamespace> -f <ImportedServiceSet.yaml>

    For example:

    $ oc create -n green-mesh-system -f import-from-red-mesh.yaml
  5. Create additional ImportedServiceSet resources as needed for each mesh peer in your federated mesh.

Verification

  • Run the following command to verify that the services were imported into green-mesh:

    $ oc get importedserviceset <PeerMeshImportedInto> -o yaml

    Example verifying that the services exported from the red mesh have been imported into the green mesh using the status section of the importedserviceset/red-mesh' object in the 'green-mesh-system namespace

    $ oc -n green-mesh-system get importedserviceset/red-mesh -o yaml

    status:
      importedServices:
      - exportedName: red-ratings.bookinfo.svc.green-mesh-exports.local
        localService:
          hostname: ratings.bookinfo.svc.red-mesh-imports.local
          name: ratings
          namespace: bookinfo
      - exportedName: reviews.red-mesh-bookinfo.svc.green-mesh-exports.local
        localService:
          hostname: ""
          name: ""
          namespace: ""

    In the preceding example only the ratings service is imported, as indicated by the populated fields under localService. The reviews service is available for import, but is not currently imported because it does not match any importRules in the ImportedServiceSet object.

2.20.13. Configuring a federated mesh for failover

Failover is the ability to switch automatically and seamlessly to a reliable backup system, for example another server. In the case of a federated mesh, you can configure a service in one mesh to failover to a service in another mesh.

You configure Federation for failover by setting the importAsLocal and locality settings in an ImportedServiceSet resource and then configuring a DestinationRule that configures failover for the service to the locality specified in the ImportedServiceSet.

Prerequisites

  • Two or more OpenShift Container Platform 4.6 or above clusters already networked and federated.
  • ExportedServiceSet resources already created for each mesh peer in the federated mesh.
  • ImportedServiceSet resources already created for each mesh peer in the federated mesh.
  • An account with the cluster-admin role.

2.20.13.1. Configuring an ImportedServiceSet for failover

Locality-weighted load balancing allows administrators to control the distribution of traffic to endpoints based on the localities of where the traffic originates and where it will terminate. These localities are specified using arbitrary labels that designate a hierarchy of localities in {region}/{zone}/{sub-zone} form.

In the examples in this section, the green-mesh is located in the us-east region, and the red-mesh is located in the us-west region.

Example ImportedServiceSet resource from red-mesh to green-mesh

kind: ImportedServiceSet
apiVersion: federation.maistra.io/v1
metadata:
  name: red-mesh #name of mesh that exported the service
  namespace: green-mesh-system #mesh namespace that service is being imported into
spec:
  importRules: # first matching rule is used
  # import ratings.bookinfo as ratings.bookinfo
  - type: NameSelector
    importAsLocal: true
    nameSelector:
      namespace: bookinfo
      name: ratings
      alias:
        # service will be imported as ratings.bookinfo.svc.red-mesh-imports.local
        namespace: bookinfo
        name: ratings
  #Locality within which imported services should be associated.
  locality:
    region: us-west

Table 2.12. ImportedServiceLocality fields table
NameDescriptionType

region:

Region within which imported services are located.

string

subzone:

Subzone within which imported services are located. I Subzone is specified, Zone must also be specified.

string

zone:

Zone within which imported services are located. If Zone is specified, Region must also be specified.

string

Procedure

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role, enter the following command:

    $ oc login --username=<NAMEOFUSER> <API token> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane, enter the following command:

    $ oc project <smcp-system>

    For example, green-mesh-system.

    $ oc project green-mesh-system
  3. Edit the ImportedServiceSet file, where <ImportedServiceSet.yaml> includes a full path to the file you want to edit, enter the following command:

    $ oc edit -n <smcp-system> -f <ImportedServiceSet.yaml>

    For example, if you want to modify the file that imports from the red-mesh-system to the green-mesh-system as shown in the previous ImportedServiceSet example.

    $ oc edit -n green-mesh-system -f import-from-red-mesh.yaml
  4. Modify the file:

    1. Set spec.importRules.importAsLocal to true.
    2. Set spec.locality to a region, zone, or subzone.
    3. Save your changes.

2.20.13.2. Configuring a DestinationRule for failover

Create a DestinationRule resource that configures the following:

  • Outlier detection for the service. This is required in order for failover to function properly. In particular, it configures the sidecar proxies to know when endpoints for a service are unhealthy, eventually triggering a failover to the next locality.
  • Failover policy between regions. This ensures that failover beyond a region boundary will behave predictably.

Procedure

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> <API token> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane.

    $ oc project <smcp-system>

    For example, green-mesh-system.

    $ oc project green-mesh-system
  3. Create a DestinationRule file based on the following example where if green-mesh is unavailable, the traffic should be routed from the green-mesh in the us-east region to the red-mesh in us-west.

    Example DestinationRule

    apiVersion: networking.istio.io/v1beta1
    kind: DestinationRule
    metadata:
      name: default-failover
      namespace: bookinfo
    spec:
      host: "ratings.bookinfo.svc.cluster.local"
      trafficPolicy:
        loadBalancer:
          localityLbSetting:
            enabled: true
            failover:
              - from: us-east
                to: us-west
        outlierDetection:
          consecutive5xxErrors: 3
          interval: 10s
          baseEjectionTime: 1m

  4. Deploy the DestinationRule, where <DestinationRule> includes the full path to your file, enter the following command:

    $ oc create -n <application namespace> -f <DestinationRule.yaml>

    For example:

    $ oc create -n bookinfo -f green-mesh-us-west-DestinationRule.yaml

2.20.14. Removing a service from the federated mesh

If you need to remove a service from the federated mesh, for example if it has become obsolete or has been replaced by a different service, you can do so.

2.20.14.1. To remove a service from a single mesh

Remove the entry for the service from the ImportedServiceSet resource for the mesh peer that no longer should access the service.

2.20.14.2. To remove a service from the entire federated mesh

Remove the entry for the service from the ExportedServiceSet resource for the mesh that owns the service.

2.20.15. Removing a mesh from the federated mesh

If you need to remove a mesh from the federation, you can do so.

  1. Edit the removed mesh’s ServiceMeshControlPlane resource to remove all federation ingress gateways for peer meshes.
  2. For each mesh peer that the removed mesh has been federated with:

    1. Remove the ServiceMeshPeer resource that links the two meshes.
    2. Edit the peer mesh’s ServiceMeshControlPlane resource to remove the egress gateway that serves the removed mesh.

2.21. Extensions

You can use WebAssembly extensions to add new features directly into the Red Hat OpenShift Service Mesh proxies. This lets you move even more common functionality out of your applications, and implement them in a single language that compiles to WebAssembly bytecode.

Note

WebAssembly extensions are not supported on IBM Z® and IBM Power®.

2.21.1. WebAssembly modules overview

WebAssembly modules can be run on many platforms, including proxies, and have broad language support, fast execution, and a sandboxed-by-default security model.

Red Hat OpenShift Service Mesh extensions are Envoy HTTP Filters, giving them a wide range of capabilities:

  • Manipulating the body and headers of requests and responses.
  • Out-of-band HTTP requests to services not in the request path, such as authentication or policy checking.
  • Side-channel data storage and queues for filters to communicate with each other.
Note

When creating new WebAssembly extensions, use the WasmPlugin API. The ServiceMeshExtension API was deprecated in Red Hat OpenShift Service Mesh version 2.2 and was removed in Red Hat OpenShift Service Mesh version 2.3.

There are two parts to writing a Red Hat OpenShift Service Mesh extension:

  1. You must write your extension using an SDK that exposes the proxy-wasm API and compile it to a WebAssembly module.
  2. You must then package the module into a container.

Supported languages

You can use any language that compiles to WebAssembly bytecode to write a Red Hat OpenShift Service Mesh extension, but the following languages have existing SDKs that expose the proxy-wasm API so that it can be consumed directly.

Table 2.13. Supported languages
LanguageMaintainerRepository

AssemblyScript

solo.io

solo-io/proxy-runtime

C++

proxy-wasm team (Istio Community)

proxy-wasm/proxy-wasm-cpp-sdk

Go

tetrate.io

tetratelabs/proxy-wasm-go-sdk

Rust

proxy-wasm team (Istio Community)

proxy-wasm/proxy-wasm-rust-sdk

2.21.2. WasmPlugin container format

Istio supports Open Container Initiative (OCI) images in its Wasm Plugin mechanism. You can distribute your Wasm Plugins as a container image, and you can use the spec.url field to refer to a container registry location. For example, quay.io/my-username/my-plugin:latest.

Because each execution environment (runtime) for a WASM module can have runtime-specific configuration parameters, a WASM image can be composed of two layers:

  • plugin.wasm (Required) - Content layer. This layer consists of a .wasm binary containing the bytecode of your WebAssembly module, to be loaded by the runtime. You must name this file plugin.wasm.
  • runtime-config.json (Optional) - Configuration layer. This layer consists of a JSON-formatted string that describes metadata about the module for the target runtime. The config layer might also contain additional data, depending on the target runtime. For example, the config for a WASM Envoy Filter contains root_ids available on the filter.

2.21.3. WasmPlugin API reference

The WasmPlugins API provides a mechanism to extend the functionality provided by the Istio proxy through WebAssembly filters.

You can deploy multiple WasmPlugins. The phase and priority settings determine the order of execution (as part of Envoy’s filter chain), allowing the configuration of complex interactions between user-supplied WasmPlugins and Istio’s internal filters.

In the following example, an authentication filter implements an OpenID flow and populates the Authorization header with a JSON Web Token (JWT). Istio authentication consumes this token and deploys it to the ingress gateway. The WasmPlugin file lives in the proxy sidecar filesystem. Note the field url.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: openid-connect
  namespace: istio-ingress
spec:
  selector:
    matchLabels:
      istio: ingressgateway
  url: file:///opt/filters/openid.wasm
  sha256: 1ef0c9a92b0420cf25f7fe5d481b231464bc88f486ca3b9c83ed5cc21d2f6210
  phase: AUTHN
  pluginConfig:
    openid_server: authn
    openid_realm: ingress

Below is the same example, but this time an Open Container Initiative (OCI) image is used instead of a file in the filesystem. Note the fields url, imagePullPolicy, and imagePullSecret.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: openid-connect
  namespace: istio-system
spec:
  selector:
    matchLabels:
      istio: ingressgateway
  url: oci://private-registry:5000/openid-connect/openid:latest
  imagePullPolicy: IfNotPresent
  imagePullSecret: private-registry-pull-secret
  phase: AUTHN
  pluginConfig:
    openid_server: authn
    openid_realm: ingress
Table 2.14. WasmPlugin Field Reference
FieldTypeDescriptionRequired

spec.selector

WorkloadSelector

Criteria used to select the specific set of pods/VMs on which this plugin configuration should be applied. If omitted, this configuration will be applied to all workload instances in the same namespace. If the WasmPlugin field is present in the config root namespace, it will be applied to all applicable workloads in any namespace.

No

spec.url

string

URL of a Wasm module or OCI container. If no scheme is present, defaults to oci://, referencing an OCI image. Other valid schemes are file:// for referencing .wasm module files present locally within the proxy container, and http[s]:// for .wasm module files hosted remotely.

No

spec.sha256

string

SHA256 checksum that will be used to verify the Wasm module or OCI container. If the url field already references a SHA256 (using the @sha256: notation), it must match the value of this field. If an OCI image is referenced by tag and this field is set, its checksum will be verified against the contents of this field after pulling.

No

spec.imagePullPolicy

PullPolicy

The pull behavior to be applied when fetching an OCI image. Only relevant when images are referenced by tag instead of SHA. Defaults to the value IfNotPresent, except when an OCI image is referenced in the url field and the latest tag is used, in which case the value Always is the default, mirroring K8s behavior. Setting is ignored if the url field is referencing a Wasm module directly using file:// or http[s]://.

No

spec.imagePullSecret

string

Credentials to use for OCI image pulling. The name of a secret in the same namespace as the WasmPlugin object that contains a pull secret for authenticating against the registry when pulling the image.

No

spec.phase

PluginPhase

Determines where in the filter chain this WasmPlugin object is injected.

No

spec.priority

int64

Determines the ordering of WasmPlugins objects that have the same phase value. When multiple WasmPlugins objects are applied to the same workload in the same phase, they will be applied by priority and in descending order. If the priority field is not set, or two WasmPlugins objects with the same value, the ordering will be determined from the name and namespace of the WasmPlugins objects. Defaults to the value 0.

No

spec.pluginName

string

The plugin name used in the Envoy configuration. Some Wasm modules might require this value to select the Wasm plugin to execute.

No

spec.pluginConfig

Struct

The configuration that will be passed on to the plugin.

No

spec.pluginConfig.verificationKey

string

The public key used to verify signatures of signed OCI images or Wasm modules. Must be supplied in PEM format.

No

The WorkloadSelector object specifies the criteria used to determine if a filter can be applied to a proxy. The matching criteria includes the metadata associated with a proxy, workload instance information such as labels attached to the pod/VM, or any other information that the proxy provides to Istio during the initial handshake. If multiple conditions are specified, all conditions need to match in order for the workload instance to be selected. Currently, only label based selection mechanism is supported.

Table 2.15. WorkloadSelector
FieldTypeDescriptionRequired

matchLabels

map<string, string>

One or more labels that indicate a specific set of pods/VMs on which a policy should be applied. The scope of label search is restricted to the configuration namespace in which the resource is present.

Yes

The PullPolicy object specifies the pull behavior to be applied when fetching an OCI image.

Table 2.16. PullPolicy
ValueDescription

<empty>

Defaults to the value IfNotPresent, except for OCI images with tag latest, for which the default will be the value Always.

IfNotPresent

If an existing version of the image has been pulled before, that will be used. If no version of the image is present locally, we will pull the latest version.

Always

Always pull the latest version of an image when applying this plugin.

Struct represents a structured data value, consisting of fields which map to dynamically typed values. In some languages, Struct might be supported by a native representation. For example, in scripting languages like JavaScript a struct is represented as an object.

Table 2.17. Struct
FieldTypeDescription

fields

map<string, Value>

Map of dynamically typed values.

PluginPhase specifies the phase in the filter chain where the plugin will be injected.

Table 2.18. PluginPhase
FieldDescription

<empty>

Control plane decides where to insert the plugin. This will generally be at the end of the filter chain, right before the Router. Do not specify PluginPhase if the plugin is independent of others.

AUTHN

Insert plugin before Istio authentication filters.

AUTHZ

Insert plugin before Istio authorization filters and after Istio authentication filters.

STATS

Insert plugin before Istio stats filters and after Istio authorization filters.

2.21.3.1. Deploying WasmPlugin resources

You can enable Red Hat OpenShift Service Mesh extensions using the WasmPlugin resource. In this example, istio-system is the name of the Service Mesh control plane project. The following example creates an openid-connect filter that performs an OpenID Connect flow to authenticate the user.

Procedure

  1. Create the following example resource:

    Example plugin.yaml

    apiVersion: extensions.istio.io/v1alpha1
    kind: WasmPlugin
    metadata:
      name: openid-connect
      namespace: istio-system
    spec:
      selector:
        matchLabels:
          istio: ingressgateway
      url: oci://private-registry:5000/openid-connect/openid:latest
      imagePullPolicy: IfNotPresent
      imagePullSecret: private-registry-pull-secret
      phase: AUTHN
      pluginConfig:
        openid_server: authn
        openid_realm: ingress

  2. Apply your plugin.yaml file with the following command:

    $ oc apply -f plugin.yaml

2.21.4. ServiceMeshExtension container format

You must have a .wasm file containing the bytecode of your WebAssembly module, and a manifest.yaml file in the root of the container filesystem to make your container image a valid extension image.

Note

When creating new WebAssembly extensions, use the WasmPlugin API. The ServiceMeshExtension API was deprecated in Red Hat OpenShift Service Mesh version 2.2 and was removed in Red Hat OpenShift Service Mesh version 2.3.

manifest.yaml

schemaVersion: 1

name: <your-extension>
description: <description>
version: 1.0.0
phase: PreAuthZ
priority: 100
module: extension.wasm

Table 2.19. Field Reference for manifest.yml
FieldDescriptionRequired

schemaVersion

Used for versioning of the manifest schema. Currently the only possible value is 1.

This is a required field.

name

The name of your extension.

This field is just metadata and currently unused.

description

The description of your extension.

This field is just metadata and currently unused.

version

The version of your extension.

This field is just metadata and currently unused.

phase

The default execution phase of your extension.

This is a required field.

priority

The default priority of your extension.

This is a required field.

module

The relative path from the container filesystem’s root to your WebAssembly module.

This is a required field.

2.21.5. ServiceMeshExtension reference

The ServiceMeshExtension API provides a mechanism to extend the functionality provided by the Istio proxy through WebAssembly filters. There are two parts to writing a WebAssembly extension:

  1. Write your extension using an SDK that exposes the proxy-wasm API and compile it to a WebAssembly module.
  2. Package it into a container.
Note

When creating new WebAssembly extensions, use the WasmPlugin API. The ServiceMeshExtension API, which was deprecated in Red Hat OpenShift Service Mesh version 2.2, was removed in Red Hat OpenShift Service Mesh version 2.3.

Table 2.20. ServiceMeshExtension Field Reference
FieldDescription

metadata.namespace

The metadata.namespace field of a ServiceMeshExtension source has a special semantic: if it equals the Control Plane Namespace, the extension will be applied to all workloads in the Service Mesh that match its workloadSelector value. When deployed to any other Mesh Namespace, it will only be applied to workloads in that same Namespace.

spec.workloadSelector

The spec.workloadSelector field has the same semantic as the spec.selector field of the Istio Gateway resource. It will match a workload based on its Pod labels. If no workloadSelector value is specified, the extension will be applied to all workloads in the namespace.

spec.config

This is a structured field that will be handed over to the extension, with the semantics dependent on the extension you are deploying.

spec.image

A container image URI pointing to the image that holds the extension.

spec.phase

The phase determines where in the filter chain the extension is injected, in relation to existing Istio functionality like Authentication, Authorization and metrics generation. Valid values are: PreAuthN, PostAuthN, PreAuthZ, PostAuthZ, PreStats, PostStats. This field defaults to the value set in the manifest.yaml file of the extension, but can be overwritten by the user.

spec.priority

If multiple extensions with the same spec.phase value are applied to the same workload instance, the spec.priority value determines the ordering of execution. Extensions with higher priority will be executed first. This allows for inter-dependent extensions. This field defaults to the value set in the manifest.yaml file of the extension, but can be overwritten by the user.

2.21.5.1. Deploying ServiceMeshExtension resources

You can enable Red Hat OpenShift Service Mesh extensions using the ServiceMeshExtension resource. In this example, istio-system is the name of the Service Mesh control plane project.

Note

When creating new WebAssembly extensions, use the WasmPlugin API. The ServiceMeshExtension API was deprecated in Red Hat OpenShift Service Mesh version 2.2 and removed in Red Hat OpenShift Service Mesh version 2.3.

For a complete example that was built using the Rust SDK, take a look at the header-append-filter. It is a simple filter that appends one or more headers to the HTTP responses, with their names and values taken out from the config field of the extension. See a sample configuration in the snippet below.

Procedure

  1. Create the following example resource:

    Example ServiceMeshExtension resource extension.yaml

    apiVersion: maistra.io/v1
    kind: ServiceMeshExtension
    metadata:
      name: header-append
      namespace: istio-system
    spec:
      workloadSelector:
        labels:
          app: httpbin
      config:
        first-header: some-value
        another-header: another-value
      image: quay.io/maistra-dev/header-append-filter:2.1
      phase: PostAuthZ
      priority: 100

  2. Apply your extension.yaml file with the following command:

    $ oc apply -f <extension>.yaml

2.21.6. Migrating from ServiceMeshExtension to WasmPlugin resources

The ServiceMeshExtension API, which was deprecated in Red Hat OpenShift Service Mesh version 2.2, was removed in Red Hat OpenShift Service Mesh version 2.3. If you are using the ServiceMeshExtension API, you must migrate to the WasmPlugin API to continue using your WebAssembly extensions.

The APIs are very similar. The migration consists of two steps:

  1. Renaming your plugin file and updating the module packaging.
  2. Creating a WasmPlugin resource that references the updated container image.

2.21.6.1. API changes

The new WasmPlugin API is similar to the ServiceMeshExtension, but with a few differences, especially in the field names:

Table 2.21. Field changes between ServiceMeshExtensions and WasmPlugin
ServiceMeshExtensionWasmPlugin

spec.config

spec.pluginConfig

spec.workloadSelector

spec.selector

spec.image

spec.url

spec.phase valid values: PreAuthN, PostAuthN, PreAuthZ, PostAuthZ, PreStats, PostStats

spec.phase valid values: <empty>, AUTHN, AUTHZ, STATS

The following is an example of how a ServiceMeshExtension resource could be converted into a WasmPlugin resource.

ServiceMeshExtension resource

apiVersion: maistra.io/v1
kind: ServiceMeshExtension
metadata:
  name: header-append
  namespace: istio-system
spec:
  workloadSelector:
    labels:
      app: httpbin
  config:
    first-header: some-value
    another-header: another-value
  image: quay.io/maistra-dev/header-append-filter:2.2
  phase: PostAuthZ
  priority: 100

New WasmPlugin resource equivalent to the ServiceMeshExtension above

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: header-append
  namespace: istio-system
spec:
  selector:
    matchLabels:
      app: httpbin
  url: oci://quay.io/maistra-dev/header-append-filter:2.2
  phase: STATS
  pluginConfig:
    first-header: some-value
    another-header: another-value

2.21.6.2. Container image format changes

The new WasmPlugin container image format is similar to the ServiceMeshExtensions, with the following differences:

  • The ServiceMeshExtension container format required a metadata file named manifest.yaml in the root directory of the container filesystem. The WasmPlugin container format does not require a manifest.yaml file.
  • The .wasm file (the actual plugin) that previously could have any filename now must be named plugin.wasm and must be located in the root directory of the container filesystem.

2.21.6.3. Migrating to WasmPlugin resources

To upgrade your WebAssembly extensions from the ServiceMeshExtension API to the WasmPlugin API, you rename your plugin file.

Prerequisites

  • ServiceMeshControlPlane is upgraded to version 2.2 or later.

Procedure

  1. Update your container image. If the plugin is already in /plugin.wasm inside the container, skip to the next step. If not:

    1. Ensure the plugin file is named plugin.wasm. You must name the extension file plugin.wasm.
    2. Ensure the plugin file is located in the root (/) directory. You must store extension files in the root of the container filesystem..
    3. Rebuild your container image and push it to a container registry.
  2. Remove the ServiceMeshExtension resource and create a WasmPlugin resource that refers to the new container image you built.

2.22. OpenShift Service Mesh Console plugin

The OpenShift Service Mesh Console (OSSMC) plugin is an extension to the OpenShift Container Platform web console that provides visibility into your Service Mesh. With the OSSMC plugin installed, a new Service Mesh menu option is available in the navigation menu on the left side of the web console, as well as new Service Mesh tabs that enhance the existing Workloads and Services console pages.

Important

If you are using a certificate that your browser does not initially trust, you must tell your browser to trust the certificate first before you are able to access the OSSMC plugin. To do this, go to the Kiali standalone user interface (UI) and tell the browser to accept its certificate.

2.22.1. About the OpenShift Service Mesh Console plugin

The OpenShift Service Mesh Console (OSSMC) plugin is an extension to the OpenShift Container Platform web console that provides visibility into your Service Mesh.

Warning

The OSSMC plugin only supports a single Kiali instance. Whether that Kiali instance is configured to access only a subset of OpenShift projects or has access cluster-wide to all projects does not matter. However, only a single Kiali instance can be accessed.

You can install the OSSMC plugin in only one of two ways: using the OpenShift Container Platform web console, or through the CLI.

Note

The OSSMC plugin is only supported on Service Mesh 2.5 or later. Specifically, the ServiceMeshControlPlane version must be set to 2.5 or later.

Installing the OSSMC plugin creates a new category, Service Mesh, in the main OpenShift Container Platform web console navigation. Click Service Mesh to see:

  • Overview for a summary of your mesh displayed as cards that represent the namespaces in the mesh
  • Graph for a full topology view of your mesh represented by nodes and edges, each node representing a component of the mesh and each edge representing traffic flowing through the mesh between components
  • Istio config for a list of all Istio configuration files in your mesh with a column that provides a quick way to know if the configuration for each resource is valid

Under Workloads, the OSSMC plugin adds a Service Mesh tab that contains the following subtabs:

  • Overview subtab provides a summary of the selected workload including a localized topology graph showing the workload with all inbound and outbound edges and nodes
  • Traffic subtab displays information about all inbound and outbound traffic to the workload.
  • Logs subtab shows the logs for the workload’s containers

    • You can view container logs individually or in a unified fashion, ordered by log time. This is especially helpful to see how the Envoy sidecar proxy logs relate to your workload’s application logs.
    • You can enable the tracing span integration which then allows you to see which logs correspond to trace spans.
  • Metrics subtab shows both inbound and outbound metric graphs in the corresponding subtabs. All the workload metrics can be displayed here, providing you with a detail view of the performance of your workload.

    • You can enable the tracing span integration which allows you to see which spans occurred at the same time as the metrics. Click a span marker in the graph to view the specific spans associated with that timeframe.
  • Traces provides a chart showing the trace spans collected over the given timeframe.

    • Click a bubble to drill down into those trace spans; the trace spans can provide you the most low-level detail within your workload application, down to the individual request level. The trace details view gives further details, including heatmaps that provide you with a comparison of one span in relation to other requests and spans in the same timeframe.
    • If you hover over a cell in a heatmap, a tooltip gives some details on the cell data.
  • Envoy subtab provides information about the Envoy sidecar configuration. This is useful when you need to dig down deep into the sidecar configuration when debugging things such as connectivity issues.

Under Networking, the OSSMC plugin adds a Service Mesh tab to Services and contains the Overview, Traffic, Inbound Metrics, and Traces subtabs that are similar to the same subtabs found in Workloads.

2.22.2. Installing OpenShift Service Mesh Console plugin using the OpenShift Container Platform web console

You can install the OpenShift Service Mesh Console (OSSMC) plugin using the OpenShift Container Platform web console.

Prerequisites

  • OpenShift Container Platform is installed.
  • Kiali Operator provided by Red Hat 1.73 is installed.
  • Red Hat OpenShift Service Mesh (OSSM) is installed.
  • ServiceMeshControlPlane 2.5 or later is installed.

Procedure

  1. Navigate to Installed Operators.
  2. Click Kiali Operator provided by Red Hat.
  3. Click Create instance on the Red Hat OpenShift Service Mesh tile.
  4. Use the Create OSSMConsole form to create an instance of the OSSMConsole custom resource (CR).

    • Name and Version are required fields.

      Note

      The Version field must match the spec.version field in your Kiali CR.

  5. Click Create.
  6. Navigate back to the OpenShift Container Platform web console and use the new menu options for visibility into your Service Mesh.

2.22.3. Installing OpenShift Service Mesh Console plugin using the CLI

You can install the OpenShift Service Mesh Console (OSSMC) plugin using the CLI, instead of the OpenShift Container Platform web console.

Prerequisites

  • OpenShift Container Platform is installed.
  • Kiali Operator provided by Red Hat 1.73 is installed.
  • Red Hat OpenShift Service Mesh (OSSM) is installed.
  • ServiceMeshControlPlane (SMCP) 2.5 or later is installed.

Procedure

  1. Create a small OSSMConsole custom resource (CR) to instruct the operator to install the plugin:

    cat <<EOM | oc apply -f -
    apiVersion: kiali.io/v1alpha1
    kind: OSSMConsole
    metadata:
      namespace: openshift-operators
      name: ossmconsole
    EOM
    Note

    The plugin resources are deployed in the same namespace where the OSSMConsole CR is created.

  2. Go to the OpenShift Container Platform web console.
  3. Refresh the browser window to see the new OSSMC plugin menu options.

2.22.4. Uninstalling OpenShift Service Mesh Console plugin using the OpenShift Container Platform web console

You can uninstall the OpenShift Service Mesh Console (OSSMC) plugin by using the OpenShift Container Platform web console.

Procedure

  1. Navigate to Installed Operators Operator details.
  2. Select the OpenShift Service Mesh Console tab.
  3. Click Delete OSSMConsole from the options menu.
Note

If you intend to also uninstall the Kiali Operator provided by Red Hat, you must first uninstall the OSSMC plugin and then uninstall the Operator. If you uninstall the Operator before ensuring the OSSMConsole CR is deleted then you may have difficulty removing that CR and its namespace. If this occurs then you must manually remove the finalizer on the CR in order to delete it and its namespace. You can do this using: $ oc patch ossmconsoles <CR name> -n <CR namespace> -p '{"metadata":{"finalizers": []}}' --type=merge.

2.22.5. Uninstalling OpenShift Service Mesh Console plugin using the CLI

You can uninstall the OpenShift Service Mesh Console (OSSMC) plugin by using the OpenShift CLI (oc).

Procedure

  1. Remove the OSSMC custom resource (CR) by running the following command:

     oc delete ossmconsoles <custom_resource_name> -n <custom_resource_namespace>
  2. Verify all CRs are deleted from all namespaces by running the following command:

    for r in $(oc get ossmconsoles --ignore-not-found=true --all-namespaces -o custom-columns=NS:.metadata.namespace,N:.metadata.name --no-headers | sed 's/  */:/g'); do oc delete ossmconsoles -n $(echo $r|cut -d: -f1) $(echo $r|cut -d: -f2); done

2.22.6. Additional resources

2.23. Using the 3scale WebAssembly module

Note

The threescale-wasm-auth module runs on integrations of 3scale API Management 2.11 or later with Red Hat OpenShift Service Mesh 2.1.0 or later.

The threescale-wasm-auth module is a WebAssembly module that uses a set of interfaces, known as an application binary interfaces (ABI). This is defined by the Proxy-WASM specification to drive any piece of software that implements the ABI so it can authorize HTTP requests against 3scale.

As an ABI specification, Proxy-WASM defines the interaction between a piece of software named host and another named module, program, or extension. The host exposes a set of services used by the module to perform a task, and in this case, to process proxy requests.

The host environment is composed of a WebAssembly virtual machine interacting with a piece of software, in this case, an HTTP proxy.

The module itself runs in isolation to the outside world except for the instructions it runs on the virtual machine and the ABI specified by Proxy-WASM. This is a safe way to provide extension points to software: the extension can only interact in well-defined ways with the virtual machine and the host. The interaction provides a computing model and a connection to the outside world the proxy is meant to have.

2.23.1. Compatibility

The threescale-wasm-auth module is designed to be fully compatible with all implementations of the Proxy-WASM ABI specification. At this point, however, it has only been thoroughly tested to work with the Envoy reverse proxy.

2.23.2. Usage as a stand-alone module

Because of its self-contained design, it is possible to configure this module to work with Proxy-WASM proxies independently of Service Mesh, as well as 3scale Istio adapter deployments.

2.23.3. Prerequisites

  • The module works with all supported 3scale releases, except when configuring a service to use OpenID connect (OIDC), which requires 3scale 2.11 or later.

2.23.4. Configuring the threescale-wasm-auth module

Cluster administrators on OpenShift Container Platform can configure the threescale-wasm-auth module to authorize HTTP requests to 3scale API Management through an application binary interface (ABI). The ABI defines the interaction between host and the module, exposing the hosts services, and allows you to use the module to process proxy requests.

2.23.4.1. The WasmPlugin API extension

Service Mesh provides a custom resource definition to specify and apply Proxy-WASM extensions to sidecar proxies, known as WasmPlugin. Service Mesh applies this custom resource to the set of workloads that require HTTP API management with 3scale.

See custom resource definition for more information.

Note

Configuring the WebAssembly extension is currently a manual process. Support for fetching the configuration for services from the 3scale system will be available in a future release.

Prerequisites

  • Identify a Kubernetes workload and namespace on your Service Mesh deployment that you will apply this module.
  • You must have a 3scale tenant account. See SaaS or 3scale 2.11 On-Premises with a matching service and relevant applications and metrics defined.
  • If you apply the module to the <product_page> microservice in the bookinfo namespace, see the Bookinfo sample application.

    • The following example is the YAML format for the custom resource for threescale-wasm-auth module. This example refers to the upstream Maistra version of Service Mesh, WasmPlugin API. You must declare the namespace where the threescale-wasm-auth module is deployed, alongside a selector to identify the set of applications the module will apply to:

      apiVersion: extensions.istio.io/v1alpha1
      kind: WasmPlugin
      metadata:
        name: <threescale_wasm_plugin_name>
        namespace: <bookinfo> 1
      spec:
        selector: 2
          labels:
            app: <product_page>
        pluginConfig: <yaml_configuration>
        url: oci://registry.redhat.io/3scale-amp2/3scale-auth-wasm-rhel8:0.0.3
        phase: AUTHZ
        priority: 100
      1
      The namespace.
      2
      The selector.
  • The spec.pluginConfig field depends on the module configuration and it is not populated in the previous example. Instead, the example uses the <yaml_configuration> placeholder value. You can use the format of this custom resource example.

    • The spec.pluginConfig field varies depending on the application. All other fields persist across multiple instances of this custom resource. As examples:

      • url: Only changes when newer versions of the module are deployed.
      • phase: Remains the same, since this module needs to be invoked after the proxy has done any local authorization, such as validating OpenID Connect (OIDC) tokens.
  • After you have the module configuration in spec.pluginConfig and the rest of the custom resource, apply it with the oc apply command:

    $ oc apply -f threescale-wasm-auth-bookinfo.yaml

2.23.5. Applying 3scale external ServiceEntry objects

To have the threescale-wasm-auth module authorize requests against 3scale, the module must have access to 3scale services. You can do this within Red Hat OpenShift Service Mesh by applying an external ServiceEntry object and a corresponding DestinationRule object for TLS configuration to use the HTTPS protocol.

The custom resources (CRs) set up the service entries and destination rules for secure access from within Service Mesh to 3scale Hosted (SaaS) for the backend and system components of the Service Management API and the Account Management API. The Service Management API receives queries for the authorization status of each request. The Account Management API provides API management configuration settings for your services.

Procedure

  1. Apply the following external ServiceEntry CR and related DestinationRule CR for 3scale Hosted backend to your cluster:

    1. Add the ServiceEntry CR to a file called service-entry-threescale-saas-backend.yml:

      ServiceEntry CR

      apiVersion: networking.istio.io/v1beta1
      kind: ServiceEntry
      metadata:
        name: service-entry-threescale-saas-backend
      spec:
        hosts:
        - su1.3scale.net
        ports:
        - number: 443
          name: https
          protocol: HTTPS
        location: MESH_EXTERNAL
        resolution: DNS

    2. Add the DestinationRule CR to a file called destination-rule-threescale-saas-backend.yml:

      DestinationRule CR

      apiVersion: networking.istio.io/v1beta1
      kind: DestinationRule
      metadata:
        name: destination-rule-threescale-saas-backend
      spec:
        host: su1.3scale.net
        trafficPolicy:
          tls:
            mode: SIMPLE
            sni: su1.3scale.net

    3. Apply and save the external ServiceEntry CR for the 3scale Hosted backend to your cluster, by running the following command:

      $ oc apply -f service-entry-threescale-saas-backend.yml
    4. Apply and save the external DestinationRule CR for the 3scale Hosted backend to your cluster, by running the following command:

      $ oc apply -f destination-rule-threescale-saas-backend.yml
  2. Apply the following external ServiceEntry CR and related DestinationRule CR for 3scale Hosted system to your cluster:

    1. Add the ServiceEntry CR to a file called service-entry-threescale-saas-system.yml:

      ServiceEntry CR

      apiVersion: networking.istio.io/v1beta1
      kind: ServiceEntry
      metadata:
        name: service-entry-threescale-saas-system
      spec:
        hosts:
        - multitenant.3scale.net
        ports:
        - number: 443
          name: https
          protocol: HTTPS
        location: MESH_EXTERNAL
        resolution: DNS

    2. Add the DestinationRule CR to a file called destination-rule-threescale-saas-system.yml:

      DestinationRule CR

      apiVersion: networking.istio.io/v1beta1
      kind: DestinationRule
      metadata:
        name: destination-rule-threescale-saas-system
      spec:
        host: multitenant.3scale.net
        trafficPolicy:
          tls:
            mode: SIMPLE
            sni: multitenant.3scale.net

    3. Apply and save the external ServiceEntry CR for the 3scale Hosted system to your cluster, by running the following command:

      $ oc apply -f service-entry-threescale-saas-system.yml
    4. Apply and save the external DestinationRule CR for the 3scale Hosted system to your cluster, by running the following command:

      $ oc apply -f <destination-rule-threescale-saas-system.yml>

Alternatively, you can deploy an in-mesh 3scale service. To deploy an in-mesh 3scale service, change the location of the services in the CR by deploying 3scale and linking to the deployment.

2.23.6. The 3scale WebAssembly module configuration

The WasmPlugin custom resource spec provides the configuration that the Proxy-WASM module reads from.

The spec is embedded in the host and read by the Proxy-WASM module. Typically, the configurations are in the JSON file format for the modules to parse, however the WasmPlugin resource can interpret the spec value as YAML and convert it to JSON for consumption by the module.

If you use the Proxy-WASM module in stand-alone mode, you must write the configuration using the JSON format. Using the JSON format means using escaping and quoting where needed within the host configuration files, for example Envoy. When you use the WebAssembly module with the WasmPlugin resource, the configuration is in the YAML format. In this case, an invalid configuration forces the module to show diagnostics based on its JSON representation to a sidecar’s logging stream.

Important

The EnvoyFilter custom resource is not a supported API, although it can be used in some 3scale Istio adapter or Service Mesh releases. Using the EnvoyFilter custom resource is not recommended. Use the WasmPlugin API instead of the EnvoyFilter custom resource. If you must use the EnvoyFilter custom resource, you must specify the spec in JSON format.

2.23.6.1. Configuring the 3scale WebAssembly module

The architecture of the 3scale WebAssembly module configuration depends on the 3scale account and authorization service, and the list of services to handle.

Prerequisites

The prerequisites are a set of minimum mandatory fields in all cases:

  • For the 3scale account and authorization service: the backend-listener URL.
  • For the list of services to handle: the service IDs and at least one credential look up method and where to find it.
  • You will find examples for dealing with userkey, appid with appkey, and OpenID Connect (OIDC) patterns.
  • The WebAssembly module uses the settings you specified in the static configuration. For example, if you add a mapping rule configuration to the module, it will always apply, even when the 3scale Admin Portal has no such mapping rule. The rest of the WasmPlugin resource exists around the spec.pluginConfig YAML entry.

2.23.6.2. The 3scale WebAssembly module api object

The api top-level string from the 3scale WebAssembly module defines which version of the configuration the module will use.

Note

A non-existent or unsupported version of the api object renders the 3scale WebAssembly module inoperable.

The api top-level string example

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
  namespace: <bookinfo>
spec:
  pluginConfig:
    api: v1
# ...

The api entry defines the rest of the values for the configuration. The only accepted value is v1. New settings that break compatibility with the current configuration or need more logic that modules using v1 cannot handle, will require different values.

2.23.6.3. The 3scale WebAssembly module system object

The system top-level object specifies how to access the 3scale Account Management API for a specific account. The upstream field is the most important part of the object. The system object is optional, but recommended unless you are providing a fully static configuration for the 3scale WebAssembly module, which is an option if you do not want to provide connectivity to the system component of 3scale.

When you provide static configuration objects in addition to the system object, the static ones always take precedence.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
    system:
      name: <saas_porta>
      upstream: <object>
      token: <my_account_token>
      ttl: 300
# ...
Table 2.22. system object fields
NameDescriptionRequired

name

An identifier for the 3scale service, currently not referenced elsewhere.

Optional

upstream

The details about a network host to be contacted. upstream refers to the 3scale Account Management API host known as system.

Yes

token

A 3scale personal access token with read permissions.

Yes

ttl

The minimum amount of seconds to consider a configuration retrieved from this host as valid before trying to fetch new changes. The default is 600 seconds (10 minutes). Note: there is no maximum amount, but the module will generally fetch any configuration within a reasonable amount of time after this TTL elapses.

Optional

2.23.6.4. The 3scale WebAssembly module upstream object

The upstream object describes an external host to which the proxy can perform calls.

apiVersion: maistra.io/v1
upstream:
  name: outbound|443||multitenant.3scale.net
  url: "https://myaccount-admin.3scale.net/"
  timeout: 5000
# ...
Table 2.23. upstream object fields
NameDescriptionRequired

name

name is not a free-form identifier. It is the identifier for the external host as defined by the proxy configuration. In the case of stand-alone Envoy configurations, it maps to the name of a Cluster, also known as upstream in other proxies. Note: the value of this field, because the Service Mesh and 3scale Istio adapter control plane configure the name according to a format using a vertical bar (|) as the separator of multiple fields. For the purposes of this integration, always use the format: outbound|<port>||<hostname>.

Yes

url

The complete URL to access the described service. Unless implied by the scheme, you must include the TCP port.

Yes

Timeout

Timeout in milliseconds so that connections to this service that take more than the amount of time to respond will be considered errors. Default is 1000 seconds.

Optional

2.23.6.5. The 3scale WebAssembly module backend object

The backend top-level object specifies how to access the 3scale Service Management API for authorizing and reporting HTTP requests. This service is provided by the Backend component of 3scale.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
# ...
    backend:
      name: backend
      upstream: <object>
# ...
Table 2.24. backend object fields
NameDescriptionRequired

name

An identifier for the 3scale backend, currently not referenced elsewhere.

Optional

upstream

The details about a network host to be contacted. This must refer to the 3scale Account Management API host, known, system.

Yes. The most important and required field.

2.23.6.6. The 3scale WebAssembly module services object

The services top-level object specifies which service identifiers are handled by this particular instance of the module.

Since accounts have multiple services, you must specify which ones are handled. The rest of the configuration revolves around how to configure services.

The services field is required. It is an array that must contain at least one service to be useful.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
# ...
    services:
    - id: "2555417834789"
      token: service_token
      authorities:
        - "*.app"
        - 0.0.0.0
        - "0.0.0.0:8443"
      credentials: <object>
      mapping_rules: <object>
# ...

Each element in the services array represents a 3scale service.

Table 2.25. services object fields
NameDescriptionRequired

ID

An identifier for this 3scale service, currently not referenced elsewhere.

Yes

token

This token can be found in the proxy configuration for your service in System or you can retrieve the it from System with following curl command:

curl https://<system_host>/admin/api/services/<service_id>/proxy/configs/production/latest.json?access_token=<access_token>" | jq '.proxy_config.content.backend_authentication_value

Optional

authorities

An array of strings, each one representing the Authority of a URL to match. These strings accept glob patterns supporting the asterisk (*), plus sign (+), and question mark (?) matchers.

Yes

credentials

An object defining which kind of credentials to look for and where.

Yes

mapping_rules

An array of objects representing mapping rules and 3scale methods to hit.

Optional

2.23.6.7. The 3scale WebAssembly module credentials object

The credentials object is a component of the service object. credentials specifies which kind of credentials to be looked up and the steps to perform this action.

All fields are optional, but you must specify at least one, user_key or app_id. The order in which you specify each credential is irrelevant because it is pre-established by the module. Only specify one instance of each credential.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
# ...
    services:
    - credentials:
        user_key: <array_of_lookup_queries>
        app_id: <array_of_lookup_queries>
        app_key: <array_of_lookup_queries>
# ...
Table 2.26. credentials object fields
NameDescriptionRequired

user_key

This is an array of lookup queries that defines a 3scale user key. A user key is commonly known as an API key.

Optional

app_id

This is an array of lookup queries that define a 3scale application identifier. Application identifiers are provided by 3scale or by using an identity provider like Red Hat Single Sign-On (RH-SS0), or OpenID Connect (OIDC). The resolution of the lookup queries specified here, whenever it is successful and resolves to two values, it sets up the app_id and the app_key.

Optional

app_key

This is an array of lookup queries that define a 3scale application key. Application keys without a resolved app_id are useless, so only specify this field when app_id has been specified.

Optional

2.23.6.8. The 3scale WebAssembly module lookup queries

The lookup query object is part of any of the fields in the credentials object. It specifies how a given credential field should be found and processed. When evaluated, a successful resolution means that one or more values were found. A failed resolution means that no values were found.

Arrays of lookup queries describe a short-circuit or relationship: a successful resolution of one of the queries stops the evaluation of any remaining queries and assigns the value or values to the specified credential-type. Each query in the array is independent of each other.

A lookup query is made up of a single field, a source object, which can be one of a number of source types. See the following example:

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
# ...
    services:
    - credentials:
        user_key:
          - <source_type>: <object>
          - <source_type>: <object>
# ...
        app_id:
          - <source_type>: <object>
# ...
        app_key:
          - <source_type>: <object>
# ...

2.23.6.9. The 3scale WebAssembly module source object

A source object exists as part of an array of sources within any of the credentials object fields. The object field name, referred to as a source-type is any one of the following:

  • header: The lookup query receives HTTP request headers as input.
  • query_string: The lookup query receives the URL query string parameters as input.
  • filter: The lookup query receives filter metadata as input.

All source-type objects have at least the following two fields:

Table 2.27. source-type object fields
NameDescriptionRequired

keys

An array of strings, each one a key, referring to entries found in the input data.

Yes

ops

An array of operations that perform a key entry match. The array is a pipeline where operations receive inputs and generate outputs on the next operation. An operation failing to provide an output resolves the lookup query as failed. The pipeline order of the operations determines the evaluation order.

Optional

The filter field name has a required path entry to show the path in the metadata you use to look up data.

When a key matches the input data, the rest of the keys are not evaluated and the source resolution algorithm jumps to executing the operations (ops) specified, if any. If no ops are specified, the result value of the matching key, if any, is returned.

Operations provide a way to specify certain conditions and transformations for inputs you have after the first phase looks up a key. Use operations when you need to transform, decode, and assert properties, however they do not provide a mature language to deal with all needs and lack Turing-completeness.

A stack stored the outputs of operations. When evaluated, the lookup query finishes by assigning the value or values at the bottom of the stack, depending on how many values the credential consumes.

2.23.6.10. The 3scale WebAssembly module operations object

Each element in the ops array belonging to a specific source type is an operation object that either applies transformations to values or performs tests. The field name to use for such an object is the name of the operation itself, and any values are the parameters to the operation, which could be structure objects, for example, maps with fields and values, lists, or strings.

Most operations attend to one or more inputs, and produce one or more outputs. When they consume inputs or produce outputs, they work with a stack of values: each value consumed by the operations is popped from the stack of values and initially populated with any source matches. The values outputted by them are pushed to the stack. Other operations do not consume or produce outputs other than asserting certain properties, but they inspect a stack of values.

Note

When resolution finishes, the values picked up by the next step, such as assigning the values to be an app_id, app_key, or user_key, are taken from the bottom values of the stack.

There are a few different operations categories:

  • decode: These transform an input value by decoding it to get a different format.
  • string: These take a string value as input and perform transformations and checks on it.
  • stack: These take a set of values in the input and perform multiple stack transformations and selection of specific positions in the stack.
  • check: These assert properties about sets of operations in a side-effect free way.
  • control: These perform operations that allow for modifying the evaluation flow.
  • format: These parse the format-specific structure of input values and look up values in it.

All operations are specified by the name identifiers as strings.

Additional resources

2.23.6.11. The 3scale WebAssembly module mapping_rules object

The mapping_rules object is part of the service object. It specifies a set of REST path patterns and related 3scale metrics and count increments to use when the patterns match.

You need the value if no dynamic configuration is provided in the system top-level object. If the object is provided in addition to the system top-level entry, then the mapping_rules object is evaluated first.

mapping_rules is an array object. Each element of that array is a mapping_rule object. The evaluated matching mapping rules on an incoming request provide the set of 3scale methods for authorization and reporting to the APIManager. When multiple matching rules refer to the same methods, there is a summation of deltas when calling into 3scale. For example, if two rules increase the Hits method twice with deltas of 1 and 3, a single method entry for Hits reporting to 3scale has a delta of 4.

2.23.6.12. The 3scale WebAssembly module mapping_rule object

The mapping_rule object is part of an array in the mapping_rules object.

The mapping_rule object fields specify the following information:

  • The HTTP request method to match.
  • A pattern to match the path against.
  • The 3scale methods to report along with the amount to report. The order in which you specify the fields determines the evaluation order.
Table 2.28. mapping_rule object fields
NameDescriptionRequired

method

Specifies a string representing an HTTP request method, also known as verb. Values accepted match the any one of the accepted HTTP method names, case-insensitive. A special value of any matches any method.

Yes

pattern

The pattern to match the HTTP request’s URI path component. This pattern follows the same syntax as documented by 3scale. It allows wildcards (use of the asterisk (*) character) using any sequence of characters between braces such as {this}.

Yes

usages

A list of usage objects. When the rule matches, all methods with their deltas are added to the list of methods sent to 3scale for authorization and reporting.

Embed the usages object with the following required fields:

  • name: The method system name to report.
  • delta: For how much to increase that method by.

Yes

last

Whether the successful matching of this rule should stop the evaluation of more mapping rules.

Optional Boolean. The default is false

The following example is independent of existing hierarchies between methods in 3scale. That is, anything run on the 3scale side will not affect this. For example, the Hits metric might be a parent of them all, so it stores 4 hits due to the sum of all reported methods in the authorized request and calls the 3scale Authrep API endpoint.

The example below uses a GET request to a path, /products/1/sold, that matches all the rules.

mapping_rules GET request example

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  pluginConfig:
# ...
    mapping_rules:
      - method: GET
        pattern: /
        usages:
          - name: hits
            delta: 1
      - method: GET
        pattern: /products/
        usages:
          - name: products
            delta: 1
      - method: ANY
        pattern: /products/{id}/sold
        usages:
          - name: sales
            delta: 1
          - name: products
            delta: 1
# ...

All usages get added to the request the module performs to 3scale with usage data as follows:

  • Hits: 1
  • products: 2
  • sales: 1

2.23.7. The 3scale WebAssembly module examples for credentials use cases

You will spend most of your time applying configuration steps to obtain credentials in the requests to your services.

The following are credentials examples, which you can modify to adapt to specific use cases.

You can combine them all, although when you specify multiple source objects with their own lookup queries, they are evaluated in order until one of them successfully resolves.

2.23.7.1. API key (user_key) in query string parameters

The following example looks up a user_key in a query string parameter or header of the same name:

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
# ...
    services:
# ...
      credentials:
        user_key:
          - query_string:
              keys:
                - <user_key>
          - header:
              keys:
                - <user_key>
# ...

2.23.7.2. Application ID and key

The following example looks up app_key and app_id credentials in a query or headers.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
# ...
    services:
# ...
      credentials:
        app_id:
          - query_string:
              keys:
                - <app_id>
          - header:
              keys:
                - <app_id>
        app_key:
          - query_string:
              keys:
                - <app_key>
          - header:
              keys:
                - <app_key>
# ...

2.23.7.3. Authorization header

A request includes an app_id and app_key in an authorization header. If there is at least one or two values outputted at the end, then you can assign the app_key.

The resolution here assigns the app_key if there is one or two outputted at the end.

The authorization header specifies a value with the type of authorization and its value is encoded as Base64. This means you can split the value by a space character, take the second output and then split it again using a colon (:) as the separator. For example, if you use this format app_id:app_key, the header looks like the following example for credential:

aladdin:opensesame:  Authorization: Basic YWxhZGRpbjpvcGVuc2VzYW1l

You must use lower case header field names as shown in the following example:

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
# ...
    services:
# ...
      credentials:
        app_id:
          - header:
              keys:
                - authorization
              ops:
                - split:
                    separator: " "
                    max: 2
                - length:
                    min: 2
                - drop:
                    head: 1
                - base64_urlsafe
                - split:
                    max: 2
        app_key:
          - header:
              keys:
                - app_key
# ...

The previous example use case looks at the headers for an authorization:

  1. It takes its string value and split it by a space, checking that it generates at least two values of a credential-type and the credential itself, then dropping the credential-type.
  2. It then decodes the second value containing the data it needs, and splits it by using a colon (:) character to have an operations stack including first the app_id, then the app_key, if it exists.

    1. If app_key does not exist in the authorization header then its specific sources are checked, for example, the header with the key app_key in this case.
  3. To add extra conditions to credentials, allow Basic authorizations, where app_id is either aladdin or admin, or any app_id being at least 8 characters in length.
  4. app_key must contain a value and have a minimum of 64 characters as shown in the following example:

    apiVersion: extensions.istio.io/v1alpha1
    kind: WasmPlugin
    metadata:
      name: <threescale_wasm_plugin_name>
    spec:
    # ...
        services:
    # ...
          credentials:
            app_id:
              - header:
                  keys:
                    - authorization
                  ops:
                    - split:
                        separator: " "
                        max: 2
                    - length:
                        min: 2
                    - reverse
                    - glob:
                      - Basic
                    - drop:
                        tail: 1
                    - base64_urlsafe
                    - split:
                        max: 2
                     - test:
                        if:
                          length:
                            min: 2
                       then:
                          - strlen:
                              max: 63
                          - or:
                              - strlen:
                                  min: 1
                              - drop:
                                  tail: 1
                    - assert:
                      - and:
                        - reverse
                        - or:
                          - strlen:
                              min: 8
                          - glob:
                            - aladdin
                            - admin
    # ...
  5. After picking up the authorization header value, you get a Basic credential-type by reversing the stack so that the type is placed on top.
  6. Run a glob match on it. When it validates, and the credential is decoded and split, you get the app_id at the bottom of the stack, and potentially the app_key at the top.
  7. Run a test: if there are two values in the stack, meaning an app_key was acquired.

    1. Ensure the string length is between 1 and 63, including app_id and app_key. If the key’s length is zero, drop it and continue as if no key exists. If there was only an app_id and no app_key, the missing else branch indicates a successful test and evaluation continues.

The last operation, assert, indicates that no side-effects make it into the stack. You can then modify the stack:

  1. Reverse the stack to have the app_id at the top.

    1. Whether or not an app_key is present, reversing the stack ensures app_id is at the top.
  2. Use and to preserve the contents of the stack across tests.

    Then use one of the following possibilities:

    • Make sure app_id has a string length of at least 8.
    • Make sure app_id matches either aladdin or admin.

2.23.7.4. OpenID Connect (OIDC) use case

For Service Mesh and the 3scale Istio adapter, you must deploy a RequestAuthentication as shown in the following example, filling in your own workload data and jwtRules:

apiVersion: security.istio.io/v1beta1
kind: RequestAuthentication
metadata:
  name: jwt-example
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: productpage
  jwtRules:
  - issuer: >-
      http://keycloak-keycloak.34.242.107.254.nip.io/auth/realms/3scale-keycloak
    jwksUri: >-
      http://keycloak-keycloak.34.242.107.254.nip.io/auth/realms/3scale-keycloak/protocol/openid-connect/certs

When you apply the RequestAuthentication, it configures Envoy with a native plugin to validate JWT tokens. The proxy validates everything before running the module so any requests that fail do not make it to the 3scale WebAssembly module.

When a JWT token is validated, the proxy stores its contents in an internal metadata object, with an entry whose key depends on the specific configuration of the plugin. This use case gives you the ability to look up structure objects with a single entry containing an unknown key name.

The 3scale app_id for OIDC matches the OAuth client_id. This is found in the azp or aud fields of JWT tokens.

To get app_id field from Envoy’s native JWT authentication filter, see the following example:

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
# ...
    services:
# ...
      credentials:
        app_id:
          - filter:
              path:
                - envoy.filters.http.jwt_authn
                - "0"
              keys:
                - azp
                - aud
              ops:
                - take:
                    head: 1
# ...

The example instructs the module to use the filter source type to look up filter metadata for an object from the Envoy-specific JWT authentication native plugin. This plugin includes the JWT token as part of a structure object with a single entry and a preconfigured name. Use 0 to specify that you will only access the single entry.

The resulting value is a structure for which you will resolve two fields:

  • azp: The value where app_id is found.
  • aud: The value where this information can also be found.

The operation ensures only one value is held for assignment.

2.23.7.5. Picking up the JWT token from a header

Some setups might have validation processes for JWT tokens where the validated token would reach this module via a header in JSON format.

To get the app_id, see the following example:

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
# ...
    services:
# ...
      credentials:
        app_id:
          - header:
              keys:
                - x-jwt-payload
              ops:
                - base64_urlsafe
                - json:
                  - keys:
                    - azp
                    - aud
                - take:
                    head: 1
# ,,,

2.23.8. 3scale WebAssembly module minimal working configuration

The following is an example of a 3scale WebAssembly module minimal working configuration. You can copy and paste this and edit it to work with your own configuration.

apiVersion: extensions.istio.io/v1alpha1
kind: WasmPlugin
metadata:
  name: <threescale_wasm_plugin_name>
spec:
  url: oci://registry.redhat.io/3scale-amp2/3scale-auth-wasm-rhel8:0.0.3
  imagePullSecret: <optional_pull_secret_resource>
  phase: AUTHZ
  priority: 100
  selector:
    labels:
      app: <product_page>
  pluginConfig:
    api: v1
    system:
      name: <system_name>
      upstream:
        name: outbound|443||multitenant.3scale.net
        url: https://istiodevel-admin.3scale.net/
        timeout: 5000
      token: <token>
    backend:
      name: <backend_name>
      upstream:
        name: outbound|443||su1.3scale.net
        url: https://su1.3scale.net/
        timeout: 5000
      extensions:
      - no_body
    services:
    - id: '2555417834780'
      authorities:
      - "*"
      credentials:
        user_key:
          - query_string:
              keys:
                - <user_key>
          - header:
              keys:
                - <user_key>
        app_id:
          - query_string:
              keys:
                - <app_id>
          - header:
              keys:
                - <app_id>
        app_key:
          - query_string:
              keys:
                - <app_key>
          - header:
              keys:
                - <app_key>

2.24. Using the 3scale Istio adapter

The 3scale Istio Adapter is an optional adapter that allows you to label a service running within the Red Hat OpenShift Service Mesh and integrate that service with the 3scale API Management solution. It is not required for Red Hat OpenShift Service Mesh.

Important

You can only use the 3scale Istio adapter with Red Hat OpenShift Service Mesh versions 2.0 and below. The Mixer component was deprecated in release 2.0 and removed in release 2.1. For Red Hat OpenShift Service Mesh versions 2.1.0 and later you should use the 3scale WebAssembly module.

If you want to enable 3scale backend cache with the 3scale Istio adapter, you must also enable Mixer policy and Mixer telemetry. See Deploying the Red Hat OpenShift Service Mesh control plane.

2.24.1. Integrate the 3scale adapter with Red Hat OpenShift Service Mesh

You can use these examples to configure requests to your services using the 3scale Istio Adapter.

Prerequisites

  • Red Hat OpenShift Service Mesh version 2.x
  • A working 3scale account (SaaS or 3scale 2.9 On-Premises)
  • Enabling backend cache requires 3scale 2.9 or greater
  • Red Hat OpenShift Service Mesh prerequisites
  • Ensure Mixer policy enforcement is enabled. Update Mixer policy enforcement section provides instructions to check the current Mixer policy enforcement status and enable policy enforcement.
  • Mixer policy and telemetry must be enabled if you are using a mixer plugin.

    • You will need to properly configure the Service Mesh Control Plane (SMCP) when upgrading.
Note

To configure the 3scale Istio Adapter, refer to Red Hat OpenShift Service Mesh custom resources for instructions on adding adapter parameters to the custom resource file.

Note

Pay particular attention to the kind: handler resource. You must update this with your 3scale account credentials. You can optionally add a service_id to a handler, but this is kept for backwards compatibility only, since it would render the handler only useful for one service in your 3scale account. If you add service_id to a handler, enabling 3scale for other services requires you to create more handlers with different service_ids.

Use a single handler per 3scale account by following the steps below:

Procedure

  1. Create a handler for your 3scale account and specify your account credentials. Omit any service identifier.

      apiVersion: "config.istio.io/v1alpha2"
      kind: handler
      metadata:
       name: threescale
      spec:
       adapter: threescale
       params:
         system_url: "https://<organization>-admin.3scale.net/"
         access_token: "<ACCESS_TOKEN>"
       connection:
         address: "threescale-istio-adapter:3333"

    Optionally, you can provide a backend_url field within the params section to override the URL provided by the 3scale configuration. This may be useful if the adapter runs on the same cluster as the 3scale on-premise instance, and you wish to leverage the internal cluster DNS.

  2. Edit or patch the Deployment resource of any services belonging to your 3scale account as follows:

    1. Add the "service-mesh.3scale.net/service-id" label with a value corresponding to a valid service_id.
    2. Add the "service-mesh.3scale.net/credentials" label with its value being the name of the handler resource from step 1.
  3. Do step 2 to link it to your 3scale account credentials and to its service identifier, whenever you intend to add more services.
  4. Modify the rule configuration with your 3scale configuration to dispatch the rule to the threescale handler.

    Rule configuration example

      apiVersion: "config.istio.io/v1alpha2"
      kind: rule
      metadata:
        name: threescale
      spec:
        match: destination.labels["service-mesh.3scale.net"] == "true"
        actions:
          - handler: threescale.handler
            instances:
              - threescale-authorization.instance

2.24.1.1. Generating 3scale custom resources

The adapter includes a tool that allows you to generate the handler, instance, and rule custom resources.

Table 2.29. Usage
OptionDescriptionRequiredDefault value

-h, --help

Produces help output for available options

No

 

--name

Unique name for this URL, token pair

Yes

 

-n, --namespace

Namespace to generate templates

No

istio-system

-t, --token

3scale access token

Yes

 

-u, --url

3scale Admin Portal URL

Yes

 

--backend-url

3scale backend URL. If set, it overrides the value that is read from system configuration

No

 

-s, --service

3scale API/Service ID

No

 

--auth

3scale authentication pattern to specify (1=API Key, 2=App Id/App Key, 3=OIDC)

No

Hybrid

-o, --output

File to save produced manifests to

No

Standard output

--version

Outputs the CLI version and exits immediately

No

 
2.24.1.1.1. Generate templates from URL examples
Note
  • Run the following commands via oc exec from the 3scale adapter container image in Generating manifests from a deployed adapter.
  • Use the 3scale-config-gen command to help avoid YAML syntax and indentation errors.
  • You can omit the --service if you use the annotations.
  • This command must be invoked from within the container image via oc exec.

Procedure

  • Use the 3scale-config-gen command to autogenerate templates files allowing the token, URL pair to be shared by multiple services as a single handler:

    $ 3scale-config-gen --name=admin-credentials --url="https://<organization>-admin.3scale.net:443" --token="[redacted]"
  • The following example generates the templates with the service ID embedded in the handler:

    $ 3scale-config-gen --url="https://<organization>-admin.3scale.net" --name="my-unique-id" --service="123456789" --token="[redacted]"

Additional resources

2.24.1.2. Generating manifests from a deployed adapter

Note
  • NAME is an identifier you use to identify with the service you are managing with 3scale.
  • The CREDENTIALS_NAME reference is an identifier that corresponds to the match section in the rule configuration. This is automatically set to the NAME identifier if you are using the CLI tool.
  • Its value does not need to be anything specific: the label value should just match the contents of the rule. See Routing service traffic through the adapter for more information.
  1. Run this command to generate manifests from a deployed adapter in the istio-system namespace:

    $ export NS="istio-system" URL="https://replaceme-admin.3scale.net:443" NAME="name" TOKEN="token"
    oc exec -n ${NS} $(oc get po -n ${NS} -o jsonpath='{.items[?(@.metadata.labels.app=="3scale-istio-adapter")].metadata.name}') \
    -it -- ./3scale-config-gen \
    --url ${URL} --name ${NAME} --token ${TOKEN} -n ${NS}
  2. This will produce sample output to the terminal. Edit these samples if required and create the objects using the oc create command.
  3. When the request reaches the adapter, the adapter needs to know how the service maps to an API on 3scale. You can provide this information in two ways:

    1. Label the workload (recommended)
    2. Hard code the handler as service_id
  4. Update the workload with the required annotations:

    Note

    You only need to update the service ID provided in this example if it is not already embedded in the handler. The setting in the handler takes precedence.

    $ export CREDENTIALS_NAME="replace-me"
    export SERVICE_ID="replace-me"
    export DEPLOYMENT="replace-me"
    patch="$(oc get deployment "${DEPLOYMENT}"
    patch="$(oc get deployment "${DEPLOYMENT}" --template='{"spec":{"template":{"metadata":{"labels":{ {{ range $k,$v := .spec.template.metadata.labels }}"{{ $k }}":"{{ $v }}",{{ end }}"service-mesh.3scale.net/service-id":"'"${SERVICE_ID}"'","service-mesh.3scale.net/credentials":"'"${CREDENTIALS_NAME}"'"}}}}}' )"
    oc patch deployment "${DEPLOYMENT}" --patch ''"${patch}"''

2.24.1.3. Routing service traffic through the adapter

Follow these steps to drive traffic for your service through the 3scale adapter.

Prerequisites

  • Credentials and service ID from your 3scale administrator.

Procedure

  1. Match the rule destination.labels["service-mesh.3scale.net/credentials"] == "threescale" that you previously created in the configuration, in the kind: rule resource.
  2. Add the above label to PodTemplateSpec on the Deployment of the target workload to integrate a service. the value, threescale, refers to the name of the generated handler. This handler stores the access token required to call 3scale.
  3. Add the destination.labels["service-mesh.3scale.net/service-id"] == "replace-me" label to the workload to pass the service ID to the adapter via the instance at request time.

2.24.2. Configure the integration settings in 3scale

Follow this procedure to configure the 3scale integration settings.

Note

For 3scale SaaS customers, Red Hat OpenShift Service Mesh is enabled as part of the Early Access program.

Procedure

  1. Navigate to [your_API_name] Integration
  2. Click Settings.
  3. Select the Istio option under Deployment.

    • The API Key (user_key) option under Authentication is selected by default.
  4. Click Update Product to save your selection.
  5. Click Configuration.
  6. Click Update Configuration.

2.24.3. Caching behavior

Responses from 3scale System APIs are cached by default within the adapter. Entries will be purged from the cache when they become older than the cacheTTLSeconds value. Also by default, automatic refreshing of cached entries will be attempted seconds before they expire, based on the cacheRefreshSeconds value. You can disable automatic refreshing by setting this value higher than the cacheTTLSeconds value.

Caching can be disabled entirely by setting cacheEntriesMax to a non-positive value.

By using the refreshing process, cached values whose hosts become unreachable will be retried before eventually being purged when past their expiry.

2.24.4. Authenticating requests

This release supports the following authentication methods:

  • Standard API Keys: single randomized strings or hashes acting as an identifier and a secret token.
  • Application identifier and key pairs: immutable identifier and mutable secret key strings.
  • OpenID authentication method: client ID string parsed from the JSON Web Token.

2.24.4.1. Applying authentication patterns

Modify the instance custom resource, as illustrated in the following authentication method examples, to configure authentication behavior. You can accept the authentication credentials from:

  • Request headers
  • Request parameters
  • Both request headers and query parameters
Note

When specifying values from headers, they must be lower case. For example, if you want to send a header as User-Key, this must be referenced in the configuration as request.headers["user-key"].

2.24.4.1.1. API key authentication method

Service Mesh looks for the API key in query parameters and request headers as specified in the user option in the subject custom resource parameter. It checks the values in the order given in the custom resource file. You can restrict the search for the API key to either query parameters or request headers by omitting the unwanted option.

In this example, Service Mesh looks for the API key in the user_key query parameter. If the API key is not in the query parameter, Service Mesh then checks the user-key header.

API key authentication method example

apiVersion: "config.istio.io/v1alpha2"
kind: instance
metadata:
  name: threescale-authorization
  namespace: istio-system
spec:
  template: authorization
  params:
    subject:
      user: request.query_params["user_key"] | request.headers["user-key"] | ""
    action:
      path: request.url_path
      method: request.method | "get"

If you want the adapter to examine a different query parameter or request header, change the name as appropriate. For example, to check for the API key in a query parameter named “key”, change request.query_params["user_key"] to request.query_params["key"].

2.24.4.1.2. Application ID and application key pair authentication method

Service Mesh looks for the application ID and application key in query parameters and request headers, as specified in the properties option in the subject custom resource parameter. The application key is optional. It checks the values in the order given in the custom resource file. You can restrict the search for the credentials to either query parameters or request headers by not including the unwanted option.

In this example, Service Mesh looks for the application ID and application key in the query parameters first, moving on to the request headers if needed.

Application ID and application key pair authentication method example

apiVersion: "config.istio.io/v1alpha2"
kind: instance
metadata:
  name: threescale-authorization
  namespace: istio-system
spec:
  template: authorization
  params:
    subject:
        app_id: request.query_params["app_id"] | request.headers["app-id"] | ""
        app_key: request.query_params["app_key"] | request.headers["app-key"] | ""
    action:
      path: request.url_path
      method: request.method | "get"

If you want the adapter to examine a different query parameter or request header, change the name as appropriate. For example, to check for the application ID in a query parameter named identification, change request.query_params["app_id"] to request.query_params["identification"].

2.24.4.1.3. OpenID authentication method

To use the OpenID Connect (OIDC) authentication method, use the properties value on the subject field to set client_id, and optionally app_key.

You can manipulate this object using the methods described previously. In the example configuration shown below, the client identifier (application ID) is parsed from the JSON Web Token (JWT) under the label azp. You can modify this as needed.

OpenID authentication method example

apiVersion: "config.istio.io/v1alpha2"
kind: instance
metadata:
  name: threescale-authorization
spec:
  template: threescale-authorization
  params:
    subject:
      properties:
        app_key: request.query_params["app_key"] | request.headers["app-key"] | ""
        client_id: request.auth.claims["azp"] | ""
      action:
        path: request.url_path
        method: request.method | "get"
        service: destination.labels["service-mesh.3scale.net/service-id"] | ""

For this integration to work correctly, OIDC must still be done in 3scale for the client to be created in the identity provider (IdP). You should create a Request authorization for the service you want to protect in the same namespace as that service. The JWT is passed in the Authorization header of the request.

In the sample RequestAuthentication defined below, replace issuer, jwksUri, and selector as appropriate.

OpenID Policy example

apiVersion: security.istio.io/v1beta1
kind: RequestAuthentication
metadata:
  name: jwt-example
  namespace: bookinfo
spec:
  selector:
    matchLabels:
      app: productpage
  jwtRules:
  - issuer: >-
      http://keycloak-keycloak.34.242.107.254.nip.io/auth/realms/3scale-keycloak
    jwksUri: >-
      http://keycloak-keycloak.34.242.107.254.nip.io/auth/realms/3scale-keycloak/protocol/openid-connect/certs

2.24.4.1.4. Hybrid authentication method

You can choose to not enforce a particular authentication method and accept any valid credentials for either method. If both an API key and an application ID/application key pair are provided, Service Mesh uses the API key.

In this example, Service Mesh checks for an API key in the query parameters, then the request headers. If there is no API key, it then checks for an application ID and key in the query parameters, then the request headers.

Hybrid authentication method example

apiVersion: "config.istio.io/v1alpha2"
kind: instance
metadata:
  name: threescale-authorization
spec:
  template: authorization
  params:
    subject:
      user: request.query_params["user_key"] | request.headers["user-key"] |
      properties:
        app_id: request.query_params["app_id"] | request.headers["app-id"] | ""
        app_key: request.query_params["app_key"] | request.headers["app-key"] | ""
        client_id: request.auth.claims["azp"] | ""
    action:
      path: request.url_path
      method: request.method | "get"
      service: destination.labels["service-mesh.3scale.net/service-id"] | ""

2.24.5. 3scale Adapter metrics

The adapter, by default reports various Prometheus metrics that are exposed on port 8080 at the /metrics endpoint. These metrics provide insight into how the interactions between the adapter and 3scale are performing. The service is labeled to be automatically discovered and scraped by Prometheus.

Note

There are incompatible changes in the 3scale Istio Adapter metrics since the previous releases in Service Mesh 1.x.

In Prometheus, metrics have been renamed with one addition for the backend cache, so that the following metrics exist as of Service Mesh 2.0:

Table 2.30. Prometheus metrics
MetricTypeDescription

threescale_latency

Histogram

Request latency between adapter and 3scale.

threescale_http_total

Counter

HTTP Status response codes for requests to 3scale backend.

threescale_system_cache_hits

Counter

Total number of requests to the 3scale system fetched from the configuration cache.

threescale_backend_cache_hits

Counter

Total number of requests to 3scale backend fetched from the backend cache.

2.24.6. 3scale backend cache

The 3scale backend cache provides an authorization and reporting cache for clients of the 3scale Service Management API. This cache is embedded in the adapter to enable lower latencies in responses in certain situations assuming the administrator is willing to accept the trade-offs.

Note

3scale backend cache is disabled by default. 3scale backend cache functionality trades inaccuracy in rate limiting and potential loss of hits since the last flush was performed for low latency and higher consumption of resources in the processor and memory.

2.24.6.1. Advantages of enabling backend cache

The following are advantages to enabling the backend cache:

  • Enable the backend cache when you find latencies are high while accessing services managed by the 3scale Istio Adapter.
  • Enabling the backend cache will stop the adapter from continually checking with the 3scale API manager for request authorizations, which will lower the latency.

    • This creates an in-memory cache of 3scale authorizations for the 3scale Istio Adapter to store and reuse before attempting to contact the 3scale API manager for authorizations. Authorizations will then take much less time to be granted or denied.
  • Backend caching is useful in cases when you are hosting the 3scale API manager in another geographical location from the service mesh running the 3scale Istio Adapter.

    • This is generally the case with the 3scale Hosted (SaaS) platform, but also if a user hosts their 3scale API manager in another cluster located in a different geographical location, in a different availability zone, or in any case where the network overhead to reach the 3scale API manager is noticeable.

2.24.6.2. Trade-offs for having lower latencies

The following are trade-offs for having lower latencies:

  • Each 3scale adapter’s authorization state updates every time a flush happens.

    • This means two or more instances of the adapter will introduce more inaccuracy between flushing periods.
    • There is a greater chance of too many requests being granted that exceed limits and introduce erratic behavior, which leads to some requests going through and some not, depending on which adapter processes each request.
  • An adapter cache that cannot flush its data and update its authorization information risks shut down or crashing without reporting its information to the API manager.
  • A fail open or fail closed policy will be applied when an adapter cache cannot determine whether a request must be granted or denied, possibly due to network connectivity issues in contacting the API manager.
  • When cache misses occur, typically right after booting the adapter or after a long period of no connectivity, latencies will grow in order to query the API manager.
  • An adapter cache must do much more work on computing authorizations than it would without an enabled cache, which will tax processor resources.
  • Memory requirements will grow proportionally to the combination of the amount of limits, applications, and services managed by the cache.

2.24.6.3. Backend cache configuration settings

The following points explain the backend cache configuration settings:

  • Find the settings to configure the backend cache in the 3scale configuration options.
  • The last 3 settings control enabling of backend cache:

    • PARAM_USE_CACHE_BACKEND - set to true to enable backend cache.
    • PARAM_BACKEND_CACHE_FLUSH_INTERVAL_SECONDS - sets time in seconds between consecutive attempts to flush cache data to the API manager.
    • PARAM_BACKEND_CACHE_POLICY_FAIL_CLOSED - set whether or not to allow/open or deny/close requests to the services when there is not enough cached data and the 3scale API manager cannot be reached.

2.24.7. 3scale Istio Adapter APIcast emulation

The 3scale Istio Adapter performs as APIcast would when the following conditions occur:

  • When a request cannot match any mapping rule defined, the returned HTTP code is 404 Not Found. This was previously 403 Forbidden.
  • When a request is denied because it goes over limits, the returned HTTP code is 429 Too Many Requests. This was previously 403 Forbidden.
  • When generating default templates via the CLI, it will use underscores rather than dashes for the headers, for example: user_key rather than user-key.

2.24.8. 3scale Istio adapter verification

You might want to check whether the 3scale Istio adapter is working as expected. If your adapter is not working, use the following steps to help troubleshoot the problem.

Procedure

  1. Ensure the 3scale-adapter pod is running in the Service Mesh control plane namespace:

    $ oc get pods -n istio-system
  2. Check that the 3scale-adapter pod has printed out information about itself booting up, such as its version:

    $ oc logs istio-system
  3. When performing requests to the services protected by the 3scale adapter integration, always try requests that lack the right credentials and ensure they fail. Check the 3scale adapter logs to gather additional information.

Additional resources

2.24.9. 3scale Istio adapter troubleshooting checklist

As the administrator installing the 3scale Istio adapter, there are a number of scenarios that might be causing your integration to not function properly. Use the following list to troubleshoot your installation:

  • Incorrect YAML indentation.
  • Missing YAML sections.
  • Forgot to apply the changes in the YAML to the cluster.
  • Forgot to label the service workloads with the service-mesh.3scale.net/credentials key.
  • Forgot to label the service workloads with service-mesh.3scale.net/service-id when using handlers that do not contain a service_id so they are reusable per account.
  • The Rule custom resource points to the wrong handler or instance custom resources, or the references lack the corresponding namespace suffix.
  • The Rule custom resource match section cannot possibly match the service you are configuring, or it points to a destination workload that is not currently running or does not exist.
  • Wrong access token or URL for the 3scale Admin Portal in the handler.
  • The Instance custom resource’s params/subject/properties section fails to list the right parameters for app_id, app_key, or client_id, either because they specify the wrong location such as the query parameters, headers, and authorization claims, or the parameter names do not match the requests used for testing.
  • Failing to use the configuration generator without realizing that it actually lives in the adapter container image and needs oc exec to invoke it.

2.25. Troubleshooting your service mesh

This section describes how to identify and resolve common problems in Red Hat OpenShift Service Mesh. Use the following sections to help troubleshoot and debug problems when deploying Red Hat OpenShift Service Mesh on OpenShift Container Platform.

2.25.1. Understanding Service Mesh versions

In order to understand what version of Red Hat OpenShift Service Mesh you have deployed on your system, you need to understand how each of the component versions is managed.

  • Operator version - The most current Operator version is 2.6.4. The Operator version number only indicates the version of the currently installed Operator. Because the Red Hat OpenShift Service Mesh Operator supports multiple versions of the Service Mesh control plane, the version of the Operator does not determine the version of your deployed ServiceMeshControlPlane resources.

    Important

    Upgrading to the latest Operator version automatically applies patch updates, but does not automatically upgrade your Service Mesh control plane to the latest minor version.

  • ServiceMeshControlPlane version - The ServiceMeshControlPlane version determines what version of Red Hat OpenShift Service Mesh you are using. The value of the spec.version field in the ServiceMeshControlPlane resource controls the architecture and configuration settings that are used to install and deploy Red Hat OpenShift Service Mesh. When you create the Service Mesh control plane you can set the version in one of two ways:

    • To configure in the Form View, select the version from the Control Plane Version menu.
    • To configure in the YAML View, set the value for spec.version in the YAML file.

Operator Lifecycle Manager (OLM) does not manage Service Mesh control plane upgrades, so the version number for your Operator and ServiceMeshControlPlane (SMCP) may not match, unless you have manually upgraded your SMCP.

2.25.2. Troubleshooting Operator installation

In addition to the information in this section, be sure to review the following topics:

2.25.2.1. Validating Operator installation

When you install the Red Hat OpenShift Service Mesh Operators, OpenShift automatically creates the following objects as part of a successful Operator installation:

  • config maps
  • custom resource definitions
  • deployments
  • pods
  • replica sets
  • roles
  • role bindings
  • secrets
  • service accounts
  • services

From the OpenShift Container Platform console

You can verify that the Operator pods are available and running by using the OpenShift Container Platform console.

  1. Navigate to Workloads Pods.
  2. Select the openshift-operators namespace.
  3. Verify that the following pods exist and have a status of running:

    • istio-operator
    • jaeger-operator
    • kiali-operator
  4. Select the openshift-operators-redhat namespace.
  5. Verify that the elasticsearch-operator pod exists and has a status of running.

From the command line

  1. Verify the Operator pods are available and running in the openshift-operators namespace with the following command:

    $ oc get pods -n openshift-operators

    Example output

    NAME                               READY   STATUS    RESTARTS   AGE
    istio-operator-bb49787db-zgr87     1/1     Running   0          15s
    jaeger-operator-7d5c4f57d8-9xphf   1/1     Running   0          2m42s
    kiali-operator-f9c8d84f4-7xh2v     1/1     Running   0          64s

  2. Verify the Elasticsearch operator with the following command:

    $ oc get pods -n openshift-operators-redhat

    Example output

    NAME                                      READY   STATUS    RESTARTS   AGE
    elasticsearch-operator-d4f59b968-796vq     1/1     Running   0          15s

2.25.2.2. Troubleshooting service mesh Operators

If you experience Operator issues:

  • Verify your Operator subscription status.
  • Verify that you did not install a community version of the Operator, instead of the supported Red Hat version.
  • Verify that you have the cluster-admin role to install Red Hat OpenShift Service Mesh.
  • Check for any errors in the Operator pod logs if the issue is related to installation of Operators.
Note

You can install Operators only through the OpenShift console, the OperatorHub is not accessible from the command line.

2.25.2.2.1. Viewing Operator pod logs

You can view Operator logs by using the oc logs command. Red Hat may request logs to help resolve support cases.

Procedure

  • To view Operator pod logs, enter the command:

    $ oc logs -n openshift-operators <podName>

    For example,

    $ oc logs -n openshift-operators istio-operator-bb49787db-zgr87

2.25.3. Troubleshooting the control plane

The Service Mesh control plane is composed of Istiod, which consolidates several previous control plane components (Citadel, Galley, Pilot) into a single binary. Deploying the ServiceMeshControlPlane also creates the other components that make up Red Hat OpenShift Service Mesh as described in the architecture topic.

2.25.3.1. Validating the Service Mesh control plane installation

When you create the Service Mesh control plane, the Service Mesh Operator uses the parameters that you have specified in the ServiceMeshControlPlane resource file to do the following:

  • Creates the Istio components and deploys the following pods:

    • istiod
    • istio-ingressgateway
    • istio-egressgateway
    • grafana
    • prometheus
  • Calls the Kiali Operator to create Kaili deployment based on configuration in either the SMCP or the Kiali custom resource.

    Note

    You view the Kiali components under the Kiali Operator, not the Service Mesh Operator.

  • Calls the Red Hat OpenShift distributed tracing platform (Jaeger) Operator to create distributed tracing platform (Jaeger) components based on configuration in either the SMCP or the Jaeger custom resource.

    Note

    You view the Jaeger components under the Red Hat OpenShift distributed tracing platform (Jaeger) Operator and the Elasticsearch components under the Red Hat Elasticsearch Operator, not the Service Mesh Operator.

    From the OpenShift Container Platform console

    You can verify the Service Mesh control plane installation in the OpenShift Container Platform web console.

    1. Navigate to Operators Installed Operators.
    2. Select the istio-system namespace.
    3. Select the Red Hat OpenShift Service Mesh Operator.

      1. Click the Istio Service Mesh Control Plane tab.
      2. Click the name of your control plane, for example basic.
      3. To view the resources created by the deployment, click the Resources tab. You can use the filter to narrow your view, for example, to check that all the Pods have a status of running.
      4. If the SMCP status indicates any problems, check the status: output in the YAML file for more information.
    4. Navigate back to Operators Installed Operators.
    5. Select the OpenShift Elasticsearch Operator.

      1. Click the Elasticsearch tab.
      2. Click the name of the deployment, for example elasticsearch.
      3. To view the resources created by the deployment, click the Resources tab. .
      4. If the Status column any problems, check the status: output on the YAML tab for more information.
    6. Navigate back to Operators Installed Operators.
    7. Select the Red Hat OpenShift distributed tracing platform (Jaeger) Operator.

      1. Click the Jaeger tab.
      2. Click the name of your deployment, for example jaeger.
      3. To view the resources created by the deployment, click the Resources tab.
      4. If the Status column indicates any problems, check the status: output on the YAML tab for more information.
    8. Navigate to Operators Installed Operators.
    9. Select the Kiali Operator.

      1. Click the Istio Service Mesh Control Plane tab.
      2. Click the name of your deployment, for example kiali.
      3. To view the resources created by the deployment, click the Resources tab.
      4. If the Status column any problems, check the status: output on the YAML tab for more information.

From the command line

  1. Run the following command to see if the Service Mesh control plane pods are available and running, where istio-system is the namespace where you installed the SMCP.

    $ oc get pods -n istio-system

    Example output

    NAME                                   READY   STATUS    RESTARTS   AGE
    grafana-6776785cfc-6fz7t               2/2     Running   0          102s
    istio-egressgateway-5f49dd99-l9ppq     1/1     Running   0          103s
    istio-ingressgateway-6dc885c48-jjd8r   1/1     Running   0          103s
    istiod-basic-6c9cc55998-wg4zq          1/1     Running   0          2m14s
    jaeger-6865d5d8bf-zrfss                2/2     Running   0          100s
    kiali-579799fbb7-8mwc8                 1/1     Running   0          46s
    prometheus-5c579dfb-6qhjk              2/2     Running   0          115s

  2. Check the status of the Service Mesh control plane deployment by using the following command. Replace istio-system with the namespace where you deployed the SMCP.

    $ oc get smcp -n istio-system

    The installation has finished successfully when the STATUS column is ComponentsReady.

    Example output

    NAME    READY   STATUS            PROFILES      VERSION   AGE
    basic   10/10   ComponentsReady   ["default"]   2.1.3     4m2s

    If you have modified and redeployed your Service Mesh control plane, the status should read UpdateSuccessful.

    Example output

    NAME            READY     STATUS             TEMPLATE   VERSION   AGE
    basic-install   10/10     UpdateSuccessful   default     v1.1     3d16h

  3. If the SMCP status indicates anything other than ComponentsReady check the status: output in the SCMP resource for more information.

    $ oc describe smcp <smcp-name> -n <controlplane-namespace>

    Example output

    $ oc describe smcp basic -n istio-system

  4. Check the status of the Jaeger deployment with the following command, where istio-system is the namespace where you deployed the SMCP.

    $ oc get jaeger -n istio-system

    Example output

    NAME     STATUS    VERSION   STRATEGY   STORAGE   AGE
    jaeger   Running   1.30.0    allinone   memory    15m

  5. Check the status of the Kiali deployment with the following command, where istio-system is the namespace where you deployed the SMCP.

    $ oc get kiali -n istio-system

    Example output

    NAME    AGE
    kiali   15m

2.25.3.1.1. Accessing the Kiali console

You can view your application’s topology, health, and metrics in the Kiali console. If your service is experiencing problems, the Kiali console lets you view the data flow through your service. You can view insights about the mesh components at different levels, including abstract applications, services, and workloads. Kiali also provides an interactive graph view of your namespace in real time.

To access the Kiali console you must have Red Hat OpenShift Service Mesh installed, Kiali installed and configured.

The installation process creates a route to access the Kiali console.

If you know the URL for the Kiali console, you can access it directly. If you do not know the URL, use the following directions.

Procedure for administrators

  1. Log in to the OpenShift Container Platform web console with an administrator role.
  2. Click Home Projects.
  3. On the Projects page, if necessary, use the filter to find the name of your project.
  4. Click the name of your project, for example, bookinfo.
  5. On the Project details page, in the Launcher section, click the Kiali link.
  6. Log in to the Kiali console with the same user name and password that you use to access the OpenShift Container Platform console.

    When you first log in to the Kiali Console, you see the Overview page which displays all the namespaces in your service mesh that you have permission to view.

    If you are validating the console installation and namespaces have not yet been added to the mesh, there might not be any data to display other than istio-system.

Procedure for developers

  1. Log in to the OpenShift Container Platform web console with a developer role.
  2. Click Project.
  3. On the Project Details page, if necessary, use the filter to find the name of your project.
  4. Click the name of your project, for example, bookinfo.
  5. On the Project page, in the Launcher section, click the Kiali link.
  6. Click Log In With OpenShift.
2.25.3.1.2. Accessing the Jaeger console

To access the Jaeger console you must have Red Hat OpenShift Service Mesh installed, Red Hat OpenShift distributed tracing platform (Jaeger) installed and configured.

The installation process creates a route to access the Jaeger console.

If you know the URL for the Jaeger console, you can access it directly. If you do not know the URL, use the following directions.

Important

Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) and OpenShift Elasticsearch Operator have been deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for this feature during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

Procedure from OpenShift console

  1. Log in to the OpenShift Container Platform web console as a user with cluster-admin rights. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  2. Navigate to Networking Routes.
  3. On the Routes page, select the Service Mesh control plane project, for example istio-system, from the Namespace menu.

    The Location column displays the linked address for each route.

  4. If necessary, use the filter to find the jaeger route. Click the route Location to launch the console.
  5. Click Log In With OpenShift.

Procedure from Kiali console

  1. Launch the Kiali console.
  2. Click Distributed Tracing in the left navigation pane.
  3. Click Log In With OpenShift.

Procedure from the CLI

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. To query for details of the route using the command line, enter the following command. In this example, istio-system is the Service Mesh control plane namespace.

    $ oc get route -n istio-system jaeger -o jsonpath='{.spec.host}'
  3. Launch a browser and navigate to https://<JAEGER_URL>, where <JAEGER_URL> is the route that you discovered in the previous step.
  4. Log in using the same user name and password that you use to access the OpenShift Container Platform console.
  5. If you have added services to the service mesh and have generated traces, you can use the filters and Find Traces button to search your trace data.

    If you are validating the console installation, there is no trace data to display.

2.25.3.2. Troubleshooting the Service Mesh control plane

If you are experiencing issues while deploying the Service Mesh control plane,

  • Ensure that the ServiceMeshControlPlane resource is installed in a project that is separate from your services and Operators. This documentation uses the istio-system project as an example, but you can deploy your control plane in any project as long as it is separate from the project that contains your Operators and services.
  • Ensure that the ServiceMeshControlPlane and Jaeger custom resources are deployed in the same project. For example, use the istio-system project for both.

2.25.4. Troubleshooting the data plane

The data plane is a set of intelligent proxies that intercept and control all inbound and outbound network communications between services in the service mesh.

Red Hat OpenShift Service Mesh relies on a proxy sidecar within the application’s pod to provide service mesh capabilities to the application.

2.25.4.1. Troubleshooting sidecar injection

Red Hat OpenShift Service Mesh does not automatically inject proxy sidecars to pods. You must opt in to sidecar injection.

2.25.4.1.1. Troubleshooting Istio sidecar injection

Check to see if automatic injection is enabled in the Deployment for your application. If automatic injection for the Envoy proxy is enabled, there should be a sidecar.istio.io/inject:"true" annotation in the Deployment resource under spec.template.metadata.annotations.

2.25.4.1.2. Troubleshooting Jaeger agent sidecar injection

Check to see if automatic injection is enabled in the Deployment for your application. If automatic injection for the Jaeger agent is enabled, there should be a sidecar.jaegertracing.io/inject:"true" annotation in the Deployment resource.

For more information about sidecar injection, see Enabling automatic injection

2.26. Troubleshooting Envoy proxy

The Envoy proxy intercepts all inbound and outbound traffic for all services in the service mesh. Envoy also collects and reports telemetry on the service mesh. Envoy is deployed as a sidecar to the relevant service in the same pod.

2.26.1. Enabling Envoy access logs

Envoy access logs are useful in diagnosing traffic failures and flows, and help with end-to-end traffic flow analysis.

To enable access logging for all istio-proxy containers, edit the ServiceMeshControlPlane (SMCP) object to add a file name for the logging output.

Procedure

  1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role. Enter the following command. Then, enter your username and password when prompted.

    $ oc login --username=<NAMEOFUSER> https://<HOSTNAME>:6443
  2. Change to the project where you installed the Service Mesh control plane, for example istio-system.

    $ oc project istio-system
  3. Edit the ServiceMeshControlPlane file.

    $ oc edit smcp <smcp_name>
  4. As show in the following example, use name to specify the file name for the proxy log. If you do not specify a value for name, no log entries will be written.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      proxy:
        accessLogging:
          file:
            name: /dev/stdout     #file name

For more information about troubleshooting pod issues, see Investigating pod issues

2.26.2. Getting support

If you experience difficulty with a procedure described in this documentation, or with OpenShift Container Platform in general, visit the Red Hat Customer Portal.

From the Customer Portal, you can:

  • Search or browse through the Red Hat Knowledgebase of articles and solutions relating to Red Hat products.
  • Submit a support case to Red Hat Support.
  • Access other product documentation.

To identify issues with your cluster, you can use Insights in OpenShift Cluster Manager. Insights provides details about issues and, if available, information on how to solve a problem.

If you have a suggestion for improving this documentation or have found an error, submit a Jira issue for the most relevant documentation component. Please provide specific details, such as the section name and OpenShift Container Platform version.

2.26.2.1. About the Red Hat Knowledgebase

The Red Hat Knowledgebase provides rich content aimed at helping you make the most of Red Hat’s products and technologies. The Red Hat Knowledgebase consists of articles, product documentation, and videos outlining best practices on installing, configuring, and using Red Hat products. In addition, you can search for solutions to known issues, each providing concise root cause descriptions and remedial steps.

2.26.2.2. Searching the Red Hat Knowledgebase

In the event of an OpenShift Container Platform issue, you can perform an initial search to determine if a solution already exists within the Red Hat Knowledgebase.

Prerequisites

  • You have a Red Hat Customer Portal account.

Procedure

  1. Log in to the Red Hat Customer Portal.
  2. Click Search.
  3. In the search field, input keywords and strings relating to the problem, including:

    • OpenShift Container Platform components (such as etcd)
    • Related procedure (such as installation)
    • Warnings, error messages, and other outputs related to explicit failures
  4. Click the Enter key.
  5. Optional: Select the OpenShift Container Platform product filter.
  6. Optional: Select the Documentation content type filter.

2.26.2.3. About collecting service mesh data

You can use the oc adm must-gather CLI command to collect information about your cluster, including features and objects associated with Red Hat OpenShift Service Mesh.

Prerequisites

  • Access to the cluster as a user with the cluster-admin role.
  • The OpenShift Container Platform CLI (oc) installed.

Procedure

  1. To collect Red Hat OpenShift Service Mesh data with must-gather, you must specify the Red Hat OpenShift Service Mesh image.

    $ oc adm must-gather --image=registry.redhat.io/openshift-service-mesh/istio-must-gather-rhel8:2.6
  2. To collect Red Hat OpenShift Service Mesh data for a specific Service Mesh control plane namespace with must-gather, you must specify the Red Hat OpenShift Service Mesh image and namespace. In this example, after gather, replace <namespace> with your Service Mesh control plane namespace, such as istio-system.

    $ oc adm must-gather --image=registry.redhat.io/openshift-service-mesh/istio-must-gather-rhel8:2.6 gather <namespace>

    This creates a local directory that contains the following items:

    • The Istio Operator namespace and its child objects
    • All control plane namespaces and their children objects
    • All namespaces and their children objects that belong to any service mesh
    • All Istio custom resource definitions (CRD)
    • All Istio CRD objects, such as VirtualServices, in a given namespace
    • All Istio webhooks

For prompt support, supply diagnostic information for both OpenShift Container Platform and Red Hat OpenShift Service Mesh.

2.26.2.4. Submitting a support case

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.
  • You have installed the OpenShift CLI (oc).
  • You have a Red Hat Customer Portal account.
  • You have a Red Hat Standard or Premium subscription.

Procedure

  1. Log in to the Customer Support page of the Red Hat Customer Portal.
  2. Click Get support.
  3. On the Cases tab of the Customer Support page:

    1. Optional: Change the pre-filled account and owner details if needed.
    2. Select the appropriate category for your issue, such as Bug or Defect, and click Continue.
  4. Enter the following information:

    1. In the Summary field, enter a concise but descriptive problem summary and further details about the symptoms being experienced, as well as your expectations.
    2. Select OpenShift Container Platform from the Product drop-down menu.
    3. Select 4.17 from the Version drop-down.
  5. Review the list of suggested Red Hat Knowledgebase solutions for a potential match against the problem that is being reported. If the suggested articles do not address the issue, click Continue.
  6. Review the updated list of suggested Red Hat Knowledgebase solutions for a potential match against the problem that is being reported. The list is refined as you provide more information during the case creation process. If the suggested articles do not address the issue, click Continue.
  7. Ensure that the account information presented is as expected, and if not, amend accordingly.
  8. Check that the autofilled OpenShift Container Platform Cluster ID is correct. If it is not, manually obtain your cluster ID.

    • To manually obtain your cluster ID using the OpenShift Container Platform web console:

      1. Navigate to Home Overview.
      2. Find the value in the Cluster ID field of the Details section.
    • Alternatively, it is possible to open a new support case through the OpenShift Container Platform web console and have your cluster ID autofilled.

      1. From the toolbar, navigate to (?) Help Open Support Case.
      2. The Cluster ID value is autofilled.
    • To obtain your cluster ID using the OpenShift CLI (oc), run the following command:

      $ oc get clusterversion -o jsonpath='{.items[].spec.clusterID}{"\n"}'
  9. Complete the following questions where prompted and then click Continue:

    • What are you experiencing? What are you expecting to happen?
    • Define the value or impact to you or the business.
    • Where are you experiencing this behavior? What environment?
    • When does this behavior occur? Frequency? Repeatedly? At certain times?
  10. Upload relevant diagnostic data files and click Continue. It is recommended to include data gathered using the oc adm must-gather command as a starting point, plus any issue specific data that is not collected by that command.
  11. Input relevant case management details and click Continue.
  12. Preview the case details and click Submit.

2.27. Service Mesh control plane configuration reference

You can customize your Red Hat OpenShift Service Mesh by modifying the default ServiceMeshControlPlane (SMCP) resource or by creating a completely custom SMCP resource. This reference section documents the configuration options available for the SMCP resource.

2.27.1. Service Mesh Control plane parameters

The following table lists the top-level parameters for the ServiceMeshControlPlane resource.

Table 2.31. ServiceMeshControlPlane resource parameters
NameDescriptionType

apiVersion

APIVersion defines the versioned schema of this representation of an object. Servers convert recognized schemas to the latest internal value, and may reject unrecognized values. The value for the ServiceMeshControlPlane version 2.0 is maistra.io/v2.

The value for ServiceMeshControlPlane version 2.0 is maistra.io/v2.

kind

Kind is a string value that represents the REST resource this object represents.

ServiceMeshControlPlane is the only valid value for a ServiceMeshControlPlane.

metadata

Metadata about this ServiceMeshControlPlane instance. You can provide a name for your Service Mesh control plane installation to keep track of your work, for example, basic.

string

spec

The specification of the desired state of this ServiceMeshControlPlane. This includes the configuration options for all components that comprise the Service Mesh control plane.

For more information, see Table 2.

status

The current status of this ServiceMeshControlPlane and the components that comprise the Service Mesh control plane.

For more information, see Table 3.

The following table lists the specifications for the ServiceMeshControlPlane resource. Changing these parameters configures Red Hat OpenShift Service Mesh components.

Table 2.32. ServiceMeshControlPlane resource spec
NameDescriptionConfigurable parameters

addons

The addons parameter configures additional features beyond core Service Mesh control plane components, such as visualization, or metric storage.

3scale, grafana, jaeger, kiali, and prometheus.

cluster

The cluster parameter sets the general configuration of the cluster (cluster name, network name, multi-cluster, mesh expansion, etc.)

meshExpansion, multiCluster, name, and network

gateways

You use the gateways parameter to configure ingress and egress gateways for the mesh.

enabled, additionalEgress, additionalIngress, egress, ingress, and openshiftRoute

general

The general parameter represents general Service Mesh control plane configuration that does not fit anywhere else.

logging and validationMessages

policy

You use the policy parameter to configure policy checking for the Service Mesh control plane. Policy checking can be enabled by setting spec.policy.enabled to true.

mixer remote, or type. type can be set to Istiod, Mixer or None.

profiles

You select the ServiceMeshControlPlane profile to use for default values using the profiles parameter.

default

proxy

You use the proxy parameter to configure the default behavior for sidecars.

accessLogging, adminPort, concurrency, and envoyMetricsService

runtime

You use the runtime parameter to configure the Service Mesh control plane components.

components, and defaults

security

The security parameter allows you to configure aspects of security for the Service Mesh control plane.

certificateAuthority, controlPlane, identity, dataPlane and trust

techPreview

The techPreview parameter enables early access to features that are in technology preview.

N/A

telemetry

If spec.mixer.telemetry.enabled is set to true, telemetry is enabled.

mixer, remote, and type. type can be set to Istiod, Mixer or None.

tracing

You use the tracing parameter to enables distributed tracing for the mesh.

sampling, type. type can be set to Jaeger or None.

version

You use the version parameter to specify what Maistra version of the Service Mesh control plane to install. When creating a ServiceMeshControlPlane with an empty version, the admission webhook sets the version to the current version. New ServiceMeshControlPlanes with an empty version are set to v2.0. Existing ServiceMeshControlPlanes with an empty version keep their setting.

string

ControlPlaneStatus represents the current state of your service mesh.

Table 2.33. ServiceMeshControlPlane resource ControlPlaneStatus
NameDescriptionType

annotations

The annotations parameter stores additional, usually redundant status information, such as the number of components deployed by the ServiceMeshControlPlane. These statuses are used by the command line tool, oc, which does not yet allow counting objects in JSONPath expressions.

Not configurable

conditions

Represents the latest available observations of the object’s current state. Reconciled indicates whether the operator has finished reconciling the actual state of deployed components with the configuration in the ServiceMeshControlPlane resource. Installed indicates whether the Service Mesh control plane has been installed. Ready indicates whether all Service Mesh control plane components are ready.

string

components

Shows the status of each deployed Service Mesh control plane component.

string

appliedSpec

The resulting specification of the configuration options after all profiles have been applied.

ControlPlaneSpec

appliedValues

The resulting values.yaml used to generate the charts.

ControlPlaneSpec

chartVersion

The version of the charts that were last processed for this resource.

string

observedGeneration

The generation observed by the controller during the most recent reconciliation. The information in the status pertains to this particular generation of the object. The status.conditions are not up-to-date if the status.observedGeneration field does not match metadata.generation.

integer

operatorVersion

The version of the operator that last processed this resource.

string

readiness

The readiness status of components & owned resources.

string

This example ServiceMeshControlPlane definition contains all of the supported parameters.

Example ServiceMeshControlPlane resource

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  proxy:
    runtime:
      container:
        resources:
          requests:
            cpu: 100m
            memory: 128Mi
          limits:
            cpu: 500m
            memory: 128Mi
  tracing:
    type: Jaeger
  gateways:
    ingress: # istio-ingressgateway
      service:
        type: ClusterIP
        ports:
        - name: status-port
          port: 15020
        - name: http2
          port: 80
          targetPort: 8080
        - name: https
          port: 443
          targetPort: 8443
      meshExpansionPorts: []
    egress: # istio-egressgateway
      service:
        type: ClusterIP
        ports:
        - name: status-port
          port: 15020
        - name: http2
          port: 80
          targetPort: 8080
        - name: https
          port: 443
          targetPort: 8443
    additionalIngress:
      some-other-ingress-gateway: {}
    additionalEgress:
      some-other-egress-gateway: {}

  policy:
    type: Mixer
    mixer: # only applies if policy.type: Mixer
      enableChecks: true
      failOpen: false

  telemetry:
    type: Istiod # or Mixer
    mixer: # only applies if telemetry.type: Mixer, for v1 telemetry
      sessionAffinity: false
      batching:
        maxEntries: 100
        maxTime: 1s
      adapters:
        kubernetesenv: true
        stdio:
          enabled: true
          outputAsJSON: true
  addons:
    grafana:
      enabled: true
      install:
        config:
          env: {}
          envSecrets: {}
        persistence:
          enabled: true
          storageClassName: ""
          accessMode: ReadWriteOnce
          capacity:
            requests:
              storage: 5Gi
        service:
          ingress:
            contextPath: /grafana
            tls:
              termination: reencrypt
    kiali:
      name: kiali
      enabled: true
      install: # install kiali CR if not present
        dashboard:
          viewOnly: false
          enableGrafana: true
          enableTracing: true
          enablePrometheus: true
      service:
        ingress:
          contextPath: /kiali
    jaeger:
      name: jaeger
      install:
        storage:
          type: Elasticsearch # or Memory
          memory:
            maxTraces: 100000
          elasticsearch:
            nodeCount: 3
            storage: {}
            redundancyPolicy: SingleRedundancy
            indexCleaner: {}
        ingress: {} # jaeger ingress configuration
  runtime:
    components:
      pilot:
        deployment:
          replicas: 2
        pod:
          affinity: {}
        container:
          resources:
            requests:
              cpu: 100m
              memory: 128Mi
            limits:
              cpu: 500m
              memory: 128Mi
      grafana:
        deployment: {}
        pod: {}
      kiali:
        deployment: {}
        pod: {}

2.27.2. spec parameters

2.27.2.1. general parameters

Here is an example that illustrates the spec.general parameters for the ServiceMeshControlPlane object and a description of the available parameters with appropriate values.

Example general parameters

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  general:
    logging:
      componentLevels: {}
          # misc: error
      logAsJSON: false
    validationMessages: true

Table 2.34. Istio general parameters
ParameterDescriptionValuesDefault value
logging:

Use to configure logging for the Service Mesh control plane components.

 

N/A

logging:
 componentLevels:

Use to specify the component logging level.

Possible values: debug, info, warn, error, fatal.

N/A

logging:
 logAsJSON:

Use to enable or disable JSON logging.

true/false

N/A

validationMessages:

Use to enable or disable validation messages to the status fields of istio.io resources. This can be useful for detecting configuration errors in resources.

true/false

N/A

2.27.2.2. profiles parameters

You can create reusable configurations with ServiceMeshControlPlane object profiles. If you do not configure the profile setting, Red Hat OpenShift Service Mesh uses the default profile.

Here is an example that illustrates the spec.profiles parameter for the ServiceMeshControlPlane object:

Example profiles parameters

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  profiles:
  - YourProfileName

For information about creating profiles, see the Creating control plane profiles.

For more detailed examples of security configuration, see Mutual Transport Layer Security (mTLS).

2.27.2.3. techPreview parameters

The spec.techPreview parameter enables early access to features that are in Technology Preview.

Important

Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

2.27.2.4. tracing parameters

The following example illustrates the spec.tracing parameters for the ServiceMeshControlPlane object, and a description of the available parameters with appropriate values.

Example tracing parameters

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 100
    type: Jaeger

Table 2.35. Istio tracing parameters
ParameterDescriptionValuesDefault value
tracing:
 sampling:

The sampling rate determines how often the Envoy proxy generates a trace. You use the sampling rate to control what percentage of requests get reported to your tracing system.

Integer values between 0 and 10000 representing increments of 0.01% (0 to 100%). For example, setting the value to 10 samples 0.1% of requests, setting the value to 100 will sample 1% of requests setting the value to 500 samples 5% of requests, and a setting of 10000 samples 100% of requests.

10000 (100% of traces)

tracing:
 type:

Currently the only tracing type that is supported is Jaeger. Jaeger is enabled by default. To disable tracing, set the type parameter to None.

None, Jaeger

Jaeger

2.27.2.5. version parameter

The Red Hat OpenShift Service Mesh Operator supports installation of different versions of the ServiceMeshControlPlane. You use the version parameter to specify what version of the Service Mesh control plane to install. If you do not specify a version parameter when creating your SMCP, the Operator sets the value to the latest version: (2.6). Existing ServiceMeshControlPlane objects keep their version setting during upgrades of the Operator.

2.27.2.6. 3scale configuration

The following table explains the parameters for the 3scale Istio Adapter in the ServiceMeshControlPlane resource.

Example 3scale parameters

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  addons:
    3Scale:
      enabled: false
      PARAM_THREESCALE_LISTEN_ADDR: 3333
      PARAM_THREESCALE_LOG_LEVEL: info
      PARAM_THREESCALE_LOG_JSON: true
      PARAM_THREESCALE_LOG_GRPC: false
      PARAM_THREESCALE_REPORT_METRICS: true
      PARAM_THREESCALE_METRICS_PORT: 8080
      PARAM_THREESCALE_CACHE_TTL_SECONDS: 300
      PARAM_THREESCALE_CACHE_REFRESH_SECONDS: 180
      PARAM_THREESCALE_CACHE_ENTRIES_MAX: 1000
      PARAM_THREESCALE_CACHE_REFRESH_RETRIES: 1
      PARAM_THREESCALE_ALLOW_INSECURE_CONN: false
      PARAM_THREESCALE_CLIENT_TIMEOUT_SECONDS: 10
      PARAM_THREESCALE_GRPC_CONN_MAX_SECONDS: 60
      PARAM_USE_CACHED_BACKEND: false
      PARAM_BACKEND_CACHE_FLUSH_INTERVAL_SECONDS: 15
      PARAM_BACKEND_CACHE_POLICY_FAIL_CLOSED: true
# ...

Table 2.36. 3scale parameters
ParameterDescriptionValuesDefault value

enabled

Whether to use the 3scale adapter

true/false

false

PARAM_THREESCALE_LISTEN_ADDR

Sets the listen address for the gRPC server

Valid port number

3333

PARAM_THREESCALE_LOG_LEVEL

Sets the minimum log output level.

debug, info, warn, error, or none

info

PARAM_THREESCALE_LOG_JSON

Controls whether the log is formatted as JSON

true/false

true

PARAM_THREESCALE_LOG_GRPC

Controls whether the log contains gRPC info

true/false

true

PARAM_THREESCALE_REPORT_METRICS

Controls whether 3scale system and backend metrics are collected and reported to Prometheus

true/false

true

PARAM_THREESCALE_METRICS_PORT

Sets the port that the 3scale /metrics endpoint can be scrapped from

Valid port number

8080

PARAM_THREESCALE_CACHE_TTL_SECONDS

Time period, in seconds, to wait before purging expired items from the cache

Time period in seconds

300

PARAM_THREESCALE_CACHE_REFRESH_SECONDS

Time period before expiry when cache elements are attempted to be refreshed

Time period in seconds

180

PARAM_THREESCALE_CACHE_ENTRIES_MAX

Max number of items that can be stored in the cache at any time. Set to 0 to disable caching

Valid number

1000

PARAM_THREESCALE_CACHE_REFRESH_RETRIES

The number of times unreachable hosts are retried during a cache update loop

Valid number

1

PARAM_THREESCALE_ALLOW_INSECURE_CONN

Allow to skip certificate verification when calling 3scale APIs. Enabling this is not recommended.

true/false

false

PARAM_THREESCALE_CLIENT_TIMEOUT_SECONDS

Sets the number of seconds to wait before terminating requests to 3scale System and Backend

Time period in seconds

10

PARAM_THREESCALE_GRPC_CONN_MAX_SECONDS

Sets the maximum amount of seconds (+/-10% jitter) a connection may exist before it is closed

Time period in seconds

60

PARAM_USE_CACHE_BACKEND

If true, attempt to create an in-memory apisonator cache for authorization requests

true/false

false

PARAM_BACKEND_CACHE_FLUSH_INTERVAL_SECONDS

If the backend cache is enabled, this sets the interval in seconds for flushing the cache against 3scale

Time period in seconds

15

PARAM_BACKEND_CACHE_POLICY_FAIL_CLOSED

Whenever the backend cache cannot retrieve authorization data, whether to deny (closed) or allow (open) requests

true/false

true

2.27.3. status parameter

The status parameter describes the current state of your service mesh. This information is generated by the Operator and is read-only.

Table 2.37. Istio status parameters
NameDescriptionType

observedGeneration

The generation observed by the controller during the most recent reconciliation. The information in the status pertains to this particular generation of the object. The status.conditions are not up-to-date if the status.observedGeneration field does not match metadata.generation.

integer

annotations

The annotations parameter stores additional, usually redundant status information, such as the number of components deployed by the ServiceMeshControlPlane object. These statuses are used by the command line tool, oc, which does not yet allow counting objects in JSONPath expressions.

Not configurable

readiness

The readiness status of components and owned resources.

string

operatorVersion

The version of the Operator that last processed this resource.

string

components

Shows the status of each deployed Service Mesh control plane component.

string

appliedSpec

The resulting specification of the configuration options after all profiles have been applied.

ControlPlaneSpec

conditions

Represents the latest available observations of the object’s current state. Reconciled indicates that the Operator has finished reconciling the actual state of deployed components with the configuration in the ServiceMeshControlPlane resource. Installed indicates that the Service Mesh control plane has been installed. Ready indicates that all Service Mesh control plane components are ready.

string

chartVersion

The version of the charts that were last processed for this resource.

string

appliedValues

The resulting values.yaml file that was used to generate the charts.

ControlPlaneSpec

2.27.4. Additional resources

2.28. Kiali configuration reference

When the Service Mesh Operator creates the ServiceMeshControlPlane it also processes the Kiali resource. The Kiali Operator then uses this object when creating Kiali instances.

2.28.1. Specifying Kiali configuration in the SMCP

You can configure Kiali under the addons section of the ServiceMeshControlPlane resource. Kiali is enabled by default. To disable Kiali, set spec.addons.kiali.enabled to false.

You can specify your Kiali configuration in either of two ways:

  • Specify the Kiali configuration in the ServiceMeshControlPlane resource under spec.addons.kiali.install. This approach has some limitations, because the complete list of Kiali configurations is not available in the SMCP.
  • Configure and deploy a Kiali instance and specify the name of the Kiali resource as the value for spec.addons.kiali.name in the ServiceMeshControlPlane resource. You must create the CR in the same namespace as the Service Mesh control plane, for example, istio-system. If a Kiali resource matching the value of name exists, the control plane will configure that Kiali resource for use with the control plane. This approach lets you fully customize your Kiali configuration in the Kiali resource. Note that with this approach, various fields in the Kiali resource are overwritten by the Service Mesh Operator, specifically, the accessible_namespaces list, as well as the endpoints for Grafana, Prometheus, and tracing.

Example SMCP parameters for Kiali

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  addons:
    kiali:
      name: kiali
      enabled: true
      install:
        dashboard:
          viewOnly: false
          enableGrafana: true
          enableTracing: true
          enablePrometheus: true
        service:
          ingress:
            contextPath: /kiali

Table 2.38. ServiceMeshControlPlane Kiali parameters
ParameterDescriptionValuesDefault value
spec:
  addons:
    kiali:
      name:

Name of Kiali custom resource. If a Kiali CR matching the value of name exists, the Service Mesh Operator will use that CR for the installation. If no Kiali CR exists, the Operator will create one using this name and the configuration options specified in the SMCP.

string

kiali

kiali:
  enabled:

This parameter enables or disables Kiali. Kiali is enabled by default.

true/false

true

kiali:
  install:

Install a Kiali resource if the named Kiali resource is not present. The install section is ignored if addons.kiali.enabled is set to false.

  
kiali:
  install:
    dashboard:

Configuration parameters for the dashboards shipped with Kiali.

  
kiali:
  install:
    dashboard:
      viewOnly:

This parameter enables or disables view-only mode for the Kiali console. When view-only mode is enabled, users cannot use the Kiali console to make changes to the Service Mesh.

true/false

false

kiali:
  install:
    dashboard:
      enableGrafana:

Grafana endpoint configured based on spec.addons.grafana configuration.

true/false

true

kiali:
  install:
    dashboard:
      enablePrometheus:

Prometheus endpoint configured based on spec.addons.prometheus configuration.

true/false

true

kiali:
  install:
    dashboard:
      enableTracing:

Tracing endpoint configured based on Jaeger custom resource configuration.

true/false

true

kiali:
  install:
    service:

Configuration parameters for the Kubernetes service associated with the Kiali installation.

  
kiali:
  install:
    service:
      metadata:

Use to specify additional metadata to apply to resources.

N/A

N/A

kiali:
  install:
    service:
      metadata:
        annotations:

Use to specify additional annotations to apply to the component’s service.

string

N/A

kiali:
  install:
    service:
      metadata:
        labels:

Use to specify additional labels to apply to the component’s service.

string

N/A

kiali:
  install:
    service:
      ingress:

Use to specify details for accessing the component’s service through an OpenShift Route.

N/A

N/A

kiali:
  install:
    service:
      ingress:
        metadata:
          annotations:

Use to specify additional annotations to apply to the component’s service ingress.

string

N/A

kiali:
  install:
    service:
      ingress:
        metadata:
          labels:

Use to specify additional labels to apply to the component’s service ingress.

string

N/A

kiali:
  install:
    service:
      ingress:
        enabled:

Use to customize an OpenShift Route for the service associated with a component.

true/false

true

kiali:
  install:
    service:
      ingress:
        contextPath:

Use to specify the context path to the service.

string

N/A

install:
  service:
    ingress:
      hosts:

Use to specify a single hostname per OpenShift route. An empty hostname implies a default hostname for the Route.

string

N/A

install:
  service:
    ingress:
      tls:

Use to configure the TLS for the OpenShift route.

 

N/A

kiali:
  install:
    service:
      nodePort:

Use to specify the nodePort for the component’s service Values.<component>.service.nodePort.port

integer

N/A

2.28.2. Specifying Kiali configuration in a Kiali custom resource

You can fully customize your Kiali deployment by configuring Kiali in the Kiali custom resource (CR) rather than in the ServiceMeshControlPlane (SMCP) resource. This configuration is sometimes called an "external Kiali" since the configuration is specified outside of the SMCP.

Note

You must deploy the ServiceMeshControlPlane and Kiali custom resources in the same namespace. For example, istio-system.

You can configure and deploy a Kiali instance and then specify the name of the Kiali resource as the value for spec.addons.kiali.name in the SMCP resource. If a Kiali CR matching the value of name exists, the Service Mesh control plane will use the existing installation. This approach lets you fully customize your Kiali configuration.

2.29. Jaeger configuration reference

When the Service Mesh Operator deploys the ServiceMeshControlPlane resource, it can also create the resources for distributed tracing. Service Mesh uses Jaeger for distributed tracing.

Important
  • Jaeger does not use FIPS validated cryptographic modules.
  • Starting with Red Hat OpenShift Service Mesh 2.5, Red Hat OpenShift distributed tracing platform (Jaeger) is deprecated and will be removed in a future release. Red Hat will provide bug fixes and support for this feature during the current release lifecycle, but this feature will no longer receive enhancements and will be removed. As an alternative to Red Hat OpenShift distributed tracing platform (Jaeger), you can use Red Hat OpenShift distributed tracing platform (Tempo) instead.

2.29.1. Enabling and disabling tracing

You enable distributed tracing by specifying a tracing type and a sampling rate in the ServiceMeshControlPlane resource.

Default all-in-one Jaeger parameters

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 100
    type: Jaeger

In Red Hat OpenShift Service Mesh 2.6, the tracing type Jaeger is deprecated and disabled by default.

In Red Hat OpenShift Service Mesh 2.5 and earlier, the tracing type Jaeger is enabled by default. To disable Jaeger tracing, set the spec.tracing.type parameter of the ServiceMeshControlPlane resource to None.

The sampling rate determines how often the Envoy proxy generates a trace. You can use the sampling rate option to control what percentage of requests get reported to your tracing system. You can configure this setting based upon your traffic in the mesh and the amount of tracing data you want to collect. You configure sampling as a scaled integer representing 0.01% increments. For example, setting the value to 10 samples 0.1% of traces, setting the value to 500 samples 5% of traces, and a setting of 10000 samples 100% of traces.

Note

The SMCP sampling configuration option controls the Envoy sampling rate. You configure the Jaeger trace sampling rate in the Jaeger custom resource.

2.29.2. Specifying Jaeger configuration in the SMCP

You configure Jaeger under the addons section of the ServiceMeshControlPlane resource. However, there are some limitations to what you can configure in the SMCP.

When the SMCP passes configuration information to the Red Hat OpenShift distributed tracing platform (Jaeger) Operator, it triggers one of three deployment strategies: allInOne, production, or streaming.

2.29.3. Deploying the distributed tracing platform

The distributed tracing platform (Jaeger) has predefined deployment strategies. You specify a deployment strategy in the Jaeger custom resource (CR) file. When you create an instance of the distributed tracing platform (Jaeger), the Red Hat OpenShift distributed tracing platform (Jaeger) Operator uses this configuration file to create the objects necessary for the deployment.

The Red Hat OpenShift distributed tracing platform (Jaeger) Operator currently supports the following deployment strategies:

  • allInOne (default) - This strategy is intended for development, testing, and demo purposes and it is not for production use. The main back-end components, Agent, Collector, and Query service, are all packaged into a single executable, which is configured (by default) to use in-memory storage. You can configure this deployment strategy in the SMCP.

    Note

    In-memory storage is not persistent, which means that if the Jaeger instance shuts down, restarts, or is replaced, your trace data will be lost. And in-memory storage cannot be scaled, since each pod has its own memory. For persistent storage, you must use the production or streaming strategies, which use Elasticsearch as the default storage.

  • production - The production strategy is intended for production environments, where long term storage of trace data is important, and a more scalable and highly available architecture is required. Each back-end component is therefore deployed separately. The Agent can be injected as a sidecar on the instrumented application. The Query and Collector services are configured with a supported storage type, which is currently Elasticsearch. Multiple instances of each of these components can be provisioned as required for performance and resilience purposes. You can configure this deployment strategy in the SMCP, but in order to be fully customized, you must specify your configuration in the Jaeger CR and link that to the SMCP.
  • streaming - The streaming strategy is designed to augment the production strategy by providing a streaming capability that sits between the Collector and the Elasticsearch back-end storage. This provides the benefit of reducing the pressure on the back-end storage, under high load situations, and enables other trace post-processing capabilities to tap into the real-time span data directly from the streaming platform (AMQ Streams/ Kafka). You cannot configure this deployment strategy in the SMCP; you must configure a Jaeger CR and link that to the SMCP.
Note

The streaming strategy requires an additional Red Hat subscription for AMQ Streams.

2.29.3.1. Default distributed tracing platform (Jaeger) deployment

If you do not specify Jaeger configuration options, the ServiceMeshControlPlane resource will use the allInOne Jaeger deployment strategy by default. When using the default allInOne deployment strategy, set spec.addons.jaeger.install.storage.type to Memory. You can accept the defaults or specify additional configuration options under install.

Control plane default Jaeger parameters (Memory)

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 10000
    type: Jaeger
  addons:
    jaeger:
      name: jaeger
      install:
        storage:
          type: Memory

2.29.3.2. Production distributed tracing platform (Jaeger) deployment (minimal)

To use the default settings for the production deployment strategy, set spec.addons.jaeger.install.storage.type to Elasticsearch and specify additional configuration options under install. Note that the SMCP only supports configuring Elasticsearch resources and image name.

Control plane default Jaeger parameters (Elasticsearch)

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 10000
    type: Jaeger
  addons:
    jaeger:
      name: jaeger  #name of Jaeger CR
      install:
        storage:
          type: Elasticsearch
        ingress:
          enabled: true
  runtime:
    components:
      tracing.jaeger.elasticsearch: # only supports resources and image name
        container:
          resources: {}

2.29.3.3. Production distributed tracing platform (Jaeger) deployment (fully customized)

The SMCP supports only minimal Elasticsearch parameters. To fully customize your production environment and access all of the Elasticsearch configuration parameters, use the Jaeger custom resource (CR) to configure Jaeger.

Create and configure your Jaeger instance and set spec.addons.jaeger.name to the name of the Jaeger instance, in this example: MyJaegerInstance.

Control plane with linked Jaeger production CR

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 1000
    type: Jaeger
  addons:
    jaeger:
      name: MyJaegerInstance #name of Jaeger CR
      install:
        storage:
          type: Elasticsearch
        ingress:
          enabled: true

2.29.3.4. Streaming Jaeger deployment

To use the streaming deployment strategy, you create and configure your Jaeger instance first, then set spec.addons.jaeger.name to the name of the Jaeger instance, in this example: MyJaegerInstance.

Control plane with linked Jaeger streaming CR

apiVersion: maistra.io/v2
kind: ServiceMeshControlPlane
metadata:
  name: basic
spec:
  version: v2.6
  tracing:
    sampling: 1000
    type: Jaeger
  addons:
    jaeger:
      name: MyJaegerInstance  #name of Jaeger CR

2.29.4. Specifying Jaeger configuration in a Jaeger custom resource

You can fully customize your Jaeger deployment by configuring Jaeger in the Jaeger custom resource (CR) rather than in the ServiceMeshControlPlane (SMCP) resource. This configuration is sometimes referred to as an "external Jaeger" since the configuration is specified outside of the SMCP.

Note

You must deploy the SMCP and Jaeger CR in the same namespace. For example, istio-system.

You can configure and deploy a standalone Jaeger instance and then specify the name of the Jaeger resource as the value for spec.addons.jaeger.name in the SMCP resource. If a Jaeger CR matching the value of name exists, the Service Mesh control plane will use the existing installation. This approach lets you fully customize your Jaeger configuration.

2.29.4.1. Deployment best practices

  • Red Hat OpenShift distributed tracing platform instance names must be unique. If you want to have multiple Red Hat OpenShift distributed tracing platform (Jaeger) instances and are using sidecar injected agents, then the Red Hat OpenShift distributed tracing platform (Jaeger) instances should have unique names, and the injection annotation should explicitly specify the Red Hat OpenShift distributed tracing platform (Jaeger) instance name the tracing data should be reported to.
  • If you have a multitenant implementation and tenants are separated by namespaces, deploy a Red Hat OpenShift distributed tracing platform (Jaeger) instance to each tenant namespace.

For information about configuring persistent storage, see Understanding persistent storage and the appropriate configuration topic for your chosen storage option.

2.29.4.2. Configuring distributed tracing security for service mesh

The distributed tracing platform (Jaeger) uses OAuth for default authentication. However Red Hat OpenShift Service Mesh uses a secret called htpasswd to facilitate communication between dependent services such as Grafana, Kiali, and the distributed tracing platform (Jaeger). When you configure your distributed tracing platform (Jaeger) in the ServiceMeshControlPlane the Service Mesh automatically configures security settings to use htpasswd.

If you are specifying your distributed tracing platform (Jaeger) configuration in a Jaeger custom resource, you must manually configure the htpasswd settings and ensure the htpasswd secret is mounted into your Jaeger instance so that Kiali can communicate with it.

2.29.4.2.1. Configuring distributed tracing security for service mesh from the web console

You can modify the Jaeger resource to configure distributed tracing platform (Jaeger) security for use with Service Mesh in the web console.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  • The Red Hat OpenShift Service Mesh Operator must be installed.
  • The ServiceMeshControlPlane deployed to the cluster.
  • You have access to the OpenShift Container Platform web console.

Procedure

  1. Log in to the OpenShift Container Platform web console as a user with the cluster-admin role.
  2. Navigate to Operators Installed Operators.
  3. Click the Project menu and select the project where your ServiceMeshControlPlane resource is deployed from the list, for example istio-system.
  4. Click the Red Hat OpenShift distributed tracing platform (Jaeger) Operator.
  5. On the Operator Details page, click the Jaeger tab.
  6. Click the name of your Jaeger instance.
  7. On the Jaeger details page, click the YAML tab to modify your configuration.
  8. Edit the Jaeger custom resource file to add the htpasswd configuration as shown in the following example.

    • spec.ingress.openshift.htpasswdFile
    • spec.volumes
    • spec.volumeMounts

      Example Jaeger resource showing htpasswd configuration

      apiVersion: jaegertracing.io/v1
      kind: Jaeger
      spec:
        ingress:
          enabled: true
          openshift:
            htpasswdFile: /etc/proxy/htpasswd/auth
            sar: '{"namespace": "istio-system", "resource": "pods", "verb": "get"}'
          options: {}
          resources: {}
          security: oauth-proxy
        volumes:
          - name: secret-htpasswd
            secret:
              secretName: htpasswd
          - configMap:
              defaultMode: 420
              items:
                - key: ca-bundle.crt
                  path: tls-ca-bundle.pem
              name: trusted-ca-bundle
              optional: true
            name: trusted-ca-bundle
        volumeMounts:
          - mountPath: /etc/proxy/htpasswd
            name: secret-htpasswd
          - mountPath: /etc/pki/ca-trust/extracted/pem/
            name: trusted-ca-bundle
            readOnly: true
      # ...

  9. Click Save.
2.29.4.2.2. Configuring distributed tracing security for service mesh from the command line

You can modify the Jaeger resource to configure distributed tracing platform (Jaeger) security for use with Service Mesh from the command line by running the OpenShift CLI (oc).

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  • The Red Hat OpenShift Service Mesh Operator must be installed.
  • The ServiceMeshControlPlane deployed to the cluster.
  • You have access to the OpenShift CLI (oc) that matches your OpenShift Container Platform version.

Procedure

  1. Log in to the OpenShift CLI (oc) as a user with the cluster-admin role by running the following command. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.

    $ oc login https://<HOSTNAME>:6443
  2. Change to the project where you installed the control plane, for example istio-system, by entering the following command:

    $ oc project istio-system
  3. Run the following command to edit the Jaeger custom resource file:

    $ oc edit -n openshift-distributed-tracing -f jaeger.yaml
  4. Edit the Jaeger custom resource file to add the htpasswd configuration as shown in the following example.

    • spec.ingress.openshift.htpasswdFile
    • spec.volumes
    • spec.volumeMounts

      Example Jaeger resource showing htpasswd configuration

      apiVersion: jaegertracing.io/v1
      kind: Jaeger
      spec:
        ingress:
          enabled: true
          openshift:
            htpasswdFile: /etc/proxy/htpasswd/auth
            sar: '{"namespace": "istio-system", "resource": "pods", "verb": "get"}'
          options: {}
          resources: {}
          security: oauth-proxy
        volumes:
          - name: secret-htpasswd
            secret:
              secretName: htpasswd
          - configMap:
              defaultMode: 420
              items:
                - key: ca-bundle.crt
                  path: tls-ca-bundle.pem
              name: trusted-ca-bundle
              optional: true
            name: trusted-ca-bundle
        volumeMounts:
          - mountPath: /etc/proxy/htpasswd
            name: secret-htpasswd
          - mountPath: /etc/pki/ca-trust/extracted/pem/
            name: trusted-ca-bundle
            readOnly: true

  5. Run the following command to watch the progress of the pod deployment:

    $ oc get pods -n openshift-distributed-tracing

2.29.4.3. Distributed tracing default configuration options

The Jaeger custom resource (CR) defines the architecture and settings to be used when creating the distributed tracing platform (Jaeger) resources. You can modify these parameters to customize your distributed tracing platform (Jaeger) implementation to your business needs.

Generic YAML example of the Jaeger CR

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: name
spec:
  strategy: <deployment_strategy>
  allInOne:
    options: {}
    resources: {}
  agent:
    options: {}
    resources: {}
  collector:
    options: {}
    resources: {}
  sampling:
    options: {}
  storage:
    type:
    options: {}
  query:
    options: {}
    resources: {}
  ingester:
    options: {}
    resources: {}
  options: {}

Table 2.39. Jaeger parameters
ParameterDescriptionValuesDefault value

apiVersion:

API version to use when creating the object.

jaegertracing.io/v1

jaegertracing.io/v1

kind:

Defines the kind of Kubernetes object to create.

jaeger

 

metadata:

Data that helps uniquely identify the object, including a name string, UID, and optional namespace.

 

OpenShift Container Platform automatically generates the UID and completes the namespace with the name of the project where the object is created.

name:

Name for the object.

The name of your distributed tracing platform (Jaeger) instance.

jaeger-all-in-one-inmemory

spec:

Specification for the object to be created.

Contains all of the configuration parameters for your distributed tracing platform (Jaeger) instance. When a common definition for all Jaeger components is required, it is defined under the spec node. When the definition relates to an individual component, it is placed under the spec/<component> node.

N/A

strategy:

Jaeger deployment strategy

allInOne, production, or streaming

allInOne

allInOne:

Because the allInOne image deploys the Agent, Collector, Query, Ingester, and Jaeger UI in a single pod, configuration for this deployment must nest component configuration under the allInOne parameter.

  

agent:

Configuration options that define the Agent.

  

collector:

Configuration options that define the Jaeger Collector.

  

sampling:

Configuration options that define the sampling strategies for tracing.

  

storage:

Configuration options that define the storage. All storage-related options must be placed under storage, rather than under the allInOne or other component options.

  

query:

Configuration options that define the Query service.

  

ingester:

Configuration options that define the Ingester service.

  

The following example YAML is the minimum required to create a Red Hat OpenShift distributed tracing platform (Jaeger) deployment using the default settings.

Example minimum required dist-tracing-all-in-one.yaml

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: jaeger-all-in-one-inmemory

2.29.4.4. Jaeger Collector configuration options

The Jaeger Collector is the component responsible for receiving the spans that were captured by the tracer and writing them to persistent Elasticsearch storage when using the production strategy, or to AMQ Streams when using the streaming strategy.

The Collectors are stateless and thus many instances of Jaeger Collector can be run in parallel. Collectors require almost no configuration, except for the location of the Elasticsearch cluster.

Table 2.40. Parameters used by the Operator to define the Jaeger Collector
ParameterDescriptionValues
collector:
  replicas:

Specifies the number of Collector replicas to create.

Integer, for example, 5

Table 2.41. Configuration parameters passed to the Collector
ParameterDescriptionValues
spec:
 collector:
  options: {}

Configuration options that define the Jaeger Collector.

 
options:
  collector:
    num-workers:

The number of workers pulling from the queue.

Integer, for example, 50

options:
  collector:
    queue-size:

The size of the Collector queue.

Integer, for example, 2000

options:
  kafka:
    producer:
      topic: jaeger-spans

The topic parameter identifies the Kafka configuration used by the Collector to produce the messages, and the Ingester to consume the messages.

Label for the producer.

options:
  kafka:
    producer:
      brokers: my-cluster-kafka-brokers.kafka:9092

Identifies the Kafka configuration used by the Collector to produce the messages. If brokers are not specified, and you have AMQ Streams 1.4.0+ installed, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator will self-provision Kafka.

 
options:
  log-level:

Logging level for the Collector.

Possible values: debug, info, warn, error, fatal, panic.

options:
  otlp:
    enabled: true
    grpc:
      host-port: 4317
      max-connection-age: 0s
      max-connection-age-grace: 0s
      max-message-size: 4194304
      tls:
        enabled: false
        cert: /path/to/cert.crt
        cipher-suites: "TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256"
        client-ca: /path/to/cert.ca
        reload-interval: 0s
        min-version: 1.2
        max-version: 1.3

To accept OTLP/gRPC, explicitly enable the otlp. All the other options are optional.

 
options:
  otlp:
    enabled: true
    http:
      cors:
        allowed-headers: [<header-name>[, <header-name>]*]
        allowed-origins: *
      host-port: 4318
      max-connection-age: 0s
      max-connection-age-grace: 0s
      max-message-size: 4194304
      read-timeout: 0s
      read-header-timeout: 2s
      idle-timeout: 0s
      tls:
        enabled: false
        cert: /path/to/cert.crt
        cipher-suites: "TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256"
        client-ca: /path/to/cert.ca
        reload-interval: 0s
        min-version: 1.2
        max-version: 1.3

To accept OTLP/HTTP, explicitly enable the otlp. All the other options are optional.

 

2.29.4.5. Distributed tracing sampling configuration options

The Red Hat OpenShift distributed tracing platform (Jaeger) Operator can be used to define sampling strategies that will be supplied to tracers that have been configured to use a remote sampler.

While all traces are generated, only a few are sampled. Sampling a trace marks the trace for further processing and storage.

Note

This is not relevant if a trace was started by the Envoy proxy, as the sampling decision is made there. The Jaeger sampling decision is only relevant when the trace is started by an application using the client.

When a service receives a request that contains no trace context, the client starts a new trace, assigns it a random trace ID, and makes a sampling decision based on the currently installed sampling strategy. The sampling decision propagates to all subsequent requests in the trace so that other services are not making the sampling decision again.

distributed tracing platform (Jaeger) libraries support the following samplers:

  • Probabilistic - The sampler makes a random sampling decision with the probability of sampling equal to the value of the sampling.param property. For example, using sampling.param=0.1 samples approximately 1 in 10 traces.
  • Rate Limiting - The sampler uses a leaky bucket rate limiter to ensure that traces are sampled with a certain constant rate. For example, using sampling.param=2.0 samples requests with the rate of 2 traces per second.
Table 2.42. Jaeger sampling options
ParameterDescriptionValuesDefault value
spec:
 sampling:
  options: {}
    default_strategy:
    service_strategy:

Configuration options that define the sampling strategies for tracing.

 

If you do not provide configuration, the Collectors will return the default probabilistic sampling policy with 0.001 (0.1%) probability for all services.

default_strategy:
  type:
service_strategy:
  type:

Sampling strategy to use. See descriptions above.

Valid values are probabilistic, and ratelimiting.

probabilistic

default_strategy:
  param:
service_strategy:
  param:

Parameters for the selected sampling strategy.

Decimal and integer values (0, .1, 1, 10)

1

This example defines a default sampling strategy that is probabilistic, with a 50% chance of the trace instances being sampled.

Probabilistic sampling example

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: with-sampling
spec:
  sampling:
    options:
      default_strategy:
        type: probabilistic
        param: 0.5
      service_strategies:
        - service: alpha
          type: probabilistic
          param: 0.8
          operation_strategies:
            - operation: op1
              type: probabilistic
              param: 0.2
            - operation: op2
              type: probabilistic
              param: 0.4
        - service: beta
          type: ratelimiting
          param: 5

If there are no user-supplied configurations, the distributed tracing platform (Jaeger) uses the following settings:

Default sampling

spec:
  sampling:
    options:
      default_strategy:
        type: probabilistic
        param: 1

2.29.4.6. Distributed tracing storage configuration options

You configure storage for the Collector, Ingester, and Query services under spec.storage. Multiple instances of each of these components can be provisioned as required for performance and resilience purposes.

Table 2.43. General storage parameters used by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator to define distributed tracing storage
ParameterDescriptionValuesDefault value
spec:
  storage:
    type:

Type of storage to use for the deployment.

memory or elasticsearch. Memory storage is only appropriate for development, testing, demonstrations, and proof of concept environments as the data does not persist if the pod is shut down. For production environments distributed tracing platform (Jaeger) supports Elasticsearch for persistent storage.

memory

storage:
  secretname:

Name of the secret, for example tracing-secret.

 

N/A

storage:
  options: {}

Configuration options that define the storage.

  
Table 2.44. Elasticsearch index cleaner parameters
ParameterDescriptionValuesDefault value
storage:
  esIndexCleaner:
    enabled:

When using Elasticsearch storage, by default a job is created to clean old traces from the index. This parameter enables or disables the index cleaner job.

true/ false

true

storage:
  esIndexCleaner:
    numberOfDays:

Number of days to wait before deleting an index.

Integer value

7

storage:
  esIndexCleaner:
    schedule:

Defines the schedule for how often to clean the Elasticsearch index.

Cron expression

"55 23 * * *"

2.29.4.6.1. Auto-provisioning an Elasticsearch instance

When you deploy a Jaeger custom resource, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator uses the OpenShift Elasticsearch Operator to create an Elasticsearch cluster based on the configuration provided in the storage section of the custom resource file. The Red Hat OpenShift distributed tracing platform (Jaeger) Operator will provision Elasticsearch if the following configurations are set:

  • spec.storage:type is set to elasticsearch
  • spec.storage.elasticsearch.doNotProvision set to false
  • spec.storage.options.es.server-urls is not defined, that is, there is no connection to an Elasticsearch instance that was not provisioned by the OpenShift Elasticsearch Operator.

When provisioning Elasticsearch, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator sets the Elasticsearch custom resource name to the value of spec.storage.elasticsearch.name from the Jaeger custom resource. If you do not specify a value for spec.storage.elasticsearch.name, the Operator uses elasticsearch.

Restrictions

  • You can have only one distributed tracing platform (Jaeger) with self-provisioned Elasticsearch instance per namespace. The Elasticsearch cluster is meant to be dedicated for a single distributed tracing platform (Jaeger) instance.
  • There can be only one Elasticsearch per namespace.
Note

If you already have installed Elasticsearch as part of OpenShift Logging, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator can use the installed OpenShift Elasticsearch Operator to provision storage.

The following configuration parameters are for a self-provisioned Elasticsearch instance, that is an instance created by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator using the OpenShift Elasticsearch Operator. You specify configuration options for self-provisioned Elasticsearch under spec:storage:elasticsearch in your configuration file.

Table 2.45. Elasticsearch resource configuration parameters
ParameterDescriptionValuesDefault value
elasticsearch:
  properties:
    doNotProvision:

Use to specify whether or not an Elasticsearch instance should be provisioned by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator.

true/false

true

elasticsearch:
  properties:
    name:

Name of the Elasticsearch instance. The Red Hat OpenShift distributed tracing platform (Jaeger) Operator uses the Elasticsearch instance specified in this parameter to connect to Elasticsearch.

string

elasticsearch

elasticsearch:
  nodeCount:

Number of Elasticsearch nodes. For high availability use at least 3 nodes. Do not use 2 nodes as “split brain” problem can happen.

Integer value. For example, Proof of concept = 1, Minimum deployment =3

3

elasticsearch:
  resources:
    requests:
      cpu:

Number of central processing units for requests, based on your environment’s configuration.

Specified in cores or millicores, for example, 200m, 0.5, 1. For example, Proof of concept = 500m, Minimum deployment =1

1

elasticsearch:
  resources:
    requests:
      memory:

Available memory for requests, based on your environment’s configuration.

Specified in bytes, for example, 200Ki, 50Mi, 5Gi. For example, Proof of concept = 1Gi, Minimum deployment = 16Gi*

16Gi

elasticsearch:
  resources:
    limits:
      cpu:

Limit on number of central processing units, based on your environment’s configuration.

Specified in cores or millicores, for example, 200m, 0.5, 1. For example, Proof of concept = 500m, Minimum deployment =1

 
elasticsearch:
  resources:
    limits:
      memory:

Available memory limit based on your environment’s configuration.

Specified in bytes, for example, 200Ki, 50Mi, 5Gi. For example, Proof of concept = 1Gi, Minimum deployment = 16Gi*

 
elasticsearch:
  redundancyPolicy:

Data replication policy defines how Elasticsearch shards are replicated across data nodes in the cluster. If not specified, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator automatically determines the most appropriate replication based on number of nodes.

ZeroRedundancy(no replica shards), SingleRedundancy(one replica shard), MultipleRedundancy(each index is spread over half of the Data nodes), FullRedundancy (each index is fully replicated on every Data node in the cluster).

 
elasticsearch:
  useCertManagement:

Use to specify whether or not distributed tracing platform (Jaeger) should use the certificate management feature of the OpenShift Elasticsearch Operator. This feature was added to {logging-title} 5.2 in OpenShift Container Platform 4.7 and is the preferred setting for new Jaeger deployments.

true/false

true

Each Elasticsearch node can operate with a lower memory setting though this is NOT recommended for production deployments. For production use, you must have no less than 16 Gi allocated to each pod by default, but preferably allocate as much as you can, up to 64 Gi per pod.

Production storage example

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: simple-prod
spec:
  strategy: production
  storage:
    type: elasticsearch
    elasticsearch:
      nodeCount: 3
      resources:
        requests:
          cpu: 1
          memory: 16Gi
        limits:
          memory: 16Gi

Storage example with persistent storage

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: simple-prod
spec:
  strategy: production
  storage:
    type: elasticsearch
    elasticsearch:
      nodeCount: 1
      storage: 1
        storageClassName: gp2
        size: 5Gi
      resources:
        requests:
          cpu: 200m
          memory: 4Gi
        limits:
          memory: 4Gi
      redundancyPolicy: ZeroRedundancy

1
Persistent storage configuration. In this case AWS gp2 with 5Gi size. When no value is specified, distributed tracing platform (Jaeger) uses emptyDir. The OpenShift Elasticsearch Operator provisions PersistentVolumeClaim and PersistentVolume which are not removed with distributed tracing platform (Jaeger) instance. You can mount the same volumes if you create a distributed tracing platform (Jaeger) instance with the same name and namespace.
2.29.4.6.2. Connecting to an existing Elasticsearch instance

You can use an existing Elasticsearch cluster for storage with distributed tracing platform. An existing Elasticsearch cluster, also known as an external Elasticsearch instance, is an instance that was not installed by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator or by the OpenShift Elasticsearch Operator.

When you deploy a Jaeger custom resource, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator will not provision Elasticsearch if the following configurations are set:

  • spec.storage.elasticsearch.doNotProvision set to true
  • spec.storage.options.es.server-urls has a value
  • spec.storage.elasticsearch.name has a value, or if the Elasticsearch instance name is elasticsearch.

The Red Hat OpenShift distributed tracing platform (Jaeger) Operator uses the Elasticsearch instance specified in spec.storage.elasticsearch.name to connect to Elasticsearch.

Restrictions

  • You cannot share or reuse a OpenShift Container Platform logging Elasticsearch instance with distributed tracing platform (Jaeger). The Elasticsearch cluster is meant to be dedicated for a single distributed tracing platform (Jaeger) instance.

The following configuration parameters are for an already existing Elasticsearch instance, also known as an external Elasticsearch instance. In this case, you specify configuration options for Elasticsearch under spec:storage:options:es in your custom resource file.

Table 2.46. General ES configuration parameters
ParameterDescriptionValuesDefault value
es:
  server-urls:

URL of the Elasticsearch instance.

The fully-qualified domain name of the Elasticsearch server.

http://elasticsearch.<namespace>.svc:9200

es:
  max-doc-count:

The maximum document count to return from an Elasticsearch query. This will also apply to aggregations. If you set both es.max-doc-count and es.max-num-spans, Elasticsearch will use the smaller value of the two.

 

10000

es:
  max-num-spans:

[Deprecated - Will be removed in a future release, use es.max-doc-count instead.] The maximum number of spans to fetch at a time, per query, in Elasticsearch. If you set both es.max-num-spans and es.max-doc-count, Elasticsearch will use the smaller value of the two.

 

10000

es:
  max-span-age:

The maximum lookback for spans in Elasticsearch.

 

72h0m0s

es:
  sniffer:

The sniffer configuration for Elasticsearch. The client uses the sniffing process to find all nodes automatically. Disabled by default.

true/ false

false

es:
  sniffer-tls-enabled:

Option to enable TLS when sniffing an Elasticsearch Cluster. The client uses the sniffing process to find all nodes automatically. Disabled by default

true/ false

false

es:
  timeout:

Timeout used for queries. When set to zero there is no timeout.

 

0s

es:
  username:

The username required by Elasticsearch. The basic authentication also loads CA if it is specified. See also es.password.

  
es:
  password:

The password required by Elasticsearch. See also, es.username.

  
es:
  version:

The major Elasticsearch version. If not specified, the value will be auto-detected from Elasticsearch.

 

0

Table 2.47. ES data replication parameters
ParameterDescriptionValuesDefault value
es:
  num-replicas:

The number of replicas per index in Elasticsearch.

 

1

es:
  num-shards:

The number of shards per index in Elasticsearch.

 

5

Table 2.48. ES index configuration parameters
ParameterDescriptionValuesDefault value
es:
  create-index-templates:

Automatically create index templates at application startup when set to true. When templates are installed manually, set to false.

true/ false

true

es:
  index-prefix:

Optional prefix for distributed tracing platform (Jaeger) indices. For example, setting this to "production" creates indices named "production-tracing-*".

  
Table 2.49. ES bulk processor configuration parameters
ParameterDescriptionValuesDefault value
es:
  bulk:
    actions:

The number of requests that can be added to the queue before the bulk processor decides to commit updates to disk.

 

1000

es:
  bulk:
    flush-interval:

A time.Duration after which bulk requests are committed, regardless of other thresholds. To disable the bulk processor flush interval, set this to zero.

 

200ms

es:
  bulk:
    size:

The number of bytes that the bulk requests can take up before the bulk processor decides to commit updates to disk.

 

5000000

es:
  bulk:
    workers:

The number of workers that are able to receive and commit bulk requests to Elasticsearch.

 

1

Table 2.50. ES TLS configuration parameters
ParameterDescriptionValuesDefault value
es:
  tls:
    ca:

Path to a TLS Certification Authority (CA) file used to verify the remote servers.

 

Will use the system truststore by default.

es:
  tls:
    cert:

Path to a TLS Certificate file, used to identify this process to the remote servers.

  
es:
  tls:
    enabled:

Enable transport layer security (TLS) when talking to the remote servers. Disabled by default.

true/ false

false

es:
  tls:
    key:

Path to a TLS Private Key file, used to identify this process to the remote servers.

  
es:
  tls:
    server-name:

Override the expected TLS server name in the certificate of the remote servers.

  
es:
  token-file:

Path to a file containing the bearer token. This flag also loads the Certification Authority (CA) file if it is specified.

  
Table 2.51. ES archive configuration parameters
ParameterDescriptionValuesDefault value
es-archive:
  bulk:
    actions:

The number of requests that can be added to the queue before the bulk processor decides to commit updates to disk.

 

0

es-archive:
  bulk:
    flush-interval:

A time.Duration after which bulk requests are committed, regardless of other thresholds. To disable the bulk processor flush interval, set this to zero.

 

0s

es-archive:
  bulk:
    size:

The number of bytes that the bulk requests can take up before the bulk processor decides to commit updates to disk.

 

0

es-archive:
  bulk:
    workers:

The number of workers that are able to receive and commit bulk requests to Elasticsearch.

 

0

es-archive:
  create-index-templates:

Automatically create index templates at application startup when set to true. When templates are installed manually, set to false.

true/ false

false

es-archive:
  enabled:

Enable extra storage.

true/ false

false

es-archive:
  index-prefix:

Optional prefix for distributed tracing platform (Jaeger) indices. For example, setting this to "production" creates indices named "production-tracing-*".

  
es-archive:
  max-doc-count:

The maximum document count to return from an Elasticsearch query. This will also apply to aggregations.

 

0

es-archive:
  max-num-spans:

[Deprecated - Will be removed in a future release, use es-archive.max-doc-count instead.] The maximum number of spans to fetch at a time, per query, in Elasticsearch.

 

0

es-archive:
  max-span-age:

The maximum lookback for spans in Elasticsearch.

 

0s

es-archive:
  num-replicas:

The number of replicas per index in Elasticsearch.

 

0

es-archive:
  num-shards:

The number of shards per index in Elasticsearch.

 

0

es-archive:
  password:

The password required by Elasticsearch. See also, es.username.

  
es-archive:
  server-urls:

The comma-separated list of Elasticsearch servers. Must be specified as fully qualified URLs, for example, http://localhost:9200.

  
es-archive:
  sniffer:

The sniffer configuration for Elasticsearch. The client uses the sniffing process to find all nodes automatically. Disabled by default.

true/ false

false

es-archive:
  sniffer-tls-enabled:

Option to enable TLS when sniffing an Elasticsearch Cluster. The client uses the sniffing process to find all nodes automatically. Disabled by default.

true/ false

false

es-archive:
  timeout:

Timeout used for queries. When set to zero there is no timeout.

 

0s

es-archive:
  tls:
    ca:

Path to a TLS Certification Authority (CA) file used to verify the remote servers.

 

Will use the system truststore by default.

es-archive:
  tls:
    cert:

Path to a TLS Certificate file, used to identify this process to the remote servers.

  
es-archive:
  tls:
    enabled:

Enable transport layer security (TLS) when talking to the remote servers. Disabled by default.

true/ false

false

es-archive:
  tls:
    key:

Path to a TLS Private Key file, used to identify this process to the remote servers.

  
es-archive:
  tls:
    server-name:

Override the expected TLS server name in the certificate of the remote servers.

  
es-archive:
  token-file:

Path to a file containing the bearer token. This flag also loads the Certification Authority (CA) file if it is specified.

  
es-archive:
  username:

The username required by Elasticsearch. The basic authentication also loads CA if it is specified. See also es-archive.password.

  
es-archive:
  version:

The major Elasticsearch version. If not specified, the value will be auto-detected from Elasticsearch.

 

0

Storage example with volume mounts

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: simple-prod
spec:
  strategy: production
  storage:
    type: elasticsearch
    options:
      es:
        server-urls: https://quickstart-es-http.default.svc:9200
        index-prefix: my-prefix
        tls:
          ca: /es/certificates/ca.crt
    secretName: tracing-secret
  volumeMounts:
    - name: certificates
      mountPath: /es/certificates/
      readOnly: true
  volumes:
    - name: certificates
      secret:
        secretName: quickstart-es-http-certs-public

The following example shows a Jaeger CR using an external Elasticsearch cluster with TLS CA certificate mounted from a volume and user/password stored in a secret.

External Elasticsearch example

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: simple-prod
spec:
  strategy: production
  storage:
    type: elasticsearch
    options:
      es:
        server-urls: https://quickstart-es-http.default.svc:9200 1
        index-prefix: my-prefix
        tls: 2
          ca: /es/certificates/ca.crt
    secretName: tracing-secret 3
  volumeMounts: 4
    - name: certificates
      mountPath: /es/certificates/
      readOnly: true
  volumes:
    - name: certificates
      secret:
        secretName: quickstart-es-http-certs-public

1
URL to Elasticsearch service running in default namespace.
2
TLS configuration. In this case only CA certificate, but it can also contain es.tls.key and es.tls.cert when using mutual TLS.
3
Secret which defines environment variables ES_PASSWORD and ES_USERNAME. Created by kubectl create secret generic tracing-secret --from-literal=ES_PASSWORD=changeme --from-literal=ES_USERNAME=elastic
4
Volume mounts and volumes which are mounted into all storage components.

2.29.4.7. Managing certificates with Elasticsearch

You can create and manage certificates using the OpenShift Elasticsearch Operator. Managing certificates using the OpenShift Elasticsearch Operator also lets you use a single Elasticsearch cluster with multiple Jaeger Collectors.

Important

Managing certificates with Elasticsearch is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Starting with version 2.4, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator delegates certificate creation to the OpenShift Elasticsearch Operator by using the following annotations in the Elasticsearch custom resource:

  • logging.openshift.io/elasticsearch-cert-management: "true"
  • logging.openshift.io/elasticsearch-cert.jaeger-<shared-es-node-name>: "user.jaeger"
  • logging.openshift.io/elasticsearch-cert.curator-<shared-es-node-name>: "system.logging.curator"

Where the <shared-es-node-name> is the name of the Elasticsearch node. For example, if you create an Elasticsearch node named custom-es, your custom resource might look like the following example.

Example Elasticsearch CR showing annotations

apiVersion: logging.openshift.io/v1
kind: Elasticsearch
metadata:
  annotations:
    logging.openshift.io/elasticsearch-cert-management: "true"
    logging.openshift.io/elasticsearch-cert.jaeger-custom-es: "user.jaeger"
    logging.openshift.io/elasticsearch-cert.curator-custom-es: "system.logging.curator"
  name: custom-es
spec:
  managementState: Managed
  nodeSpec:
    resources:
      limits:
        memory: 16Gi
      requests:
        cpu: 1
        memory: 16Gi
  nodes:
    - nodeCount: 3
      proxyResources: {}
      resources: {}
      roles:
        - master
        - client
        - data
      storage: {}
  redundancyPolicy: ZeroRedundancy

Prerequisites

  • The Red Hat OpenShift Service Mesh Operator is installed.
  • The {logging-title} is installed with default configuration in your cluster.
  • The Elasticsearch node and the Jaeger instances must be deployed in the same namespace. For example, tracing-system.

You enable certificate management by setting spec.storage.elasticsearch.useCertManagement to true in the Jaeger custom resource.

Example showing useCertManagement

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: jaeger-prod
spec:
  strategy: production
  storage:
    type: elasticsearch
    elasticsearch:
      name: custom-es
      doNotProvision: true
      useCertManagement: true

The Red Hat OpenShift distributed tracing platform (Jaeger) Operator sets the Elasticsearch custom resource name to the value of spec.storage.elasticsearch.name from the Jaeger custom resource when provisioning Elasticsearch.

The certificates are provisioned by the OpenShift Elasticsearch Operator and the Red Hat OpenShift distributed tracing platform (Jaeger) Operator injects the certificates.

For more information about configuring Elasticsearch with OpenShift Container Platform, see xref :../../observability/logging/log_storage/logging-config-es-store.adoc#logging-config-es-store[Configuring the Elasticsearch log store] or Configuring and deploying distributed tracing.

2.29.4.8. Query configuration options

Query is a service that retrieves traces from storage and hosts the user interface to display them.

Table 2.52. Parameters used by the Red Hat OpenShift distributed tracing platform (Jaeger) Operator to define Query
ParameterDescriptionValuesDefault value
spec:
  query:
    replicas:

Specifies the number of Query replicas to create.

Integer, for example, 2

 
Table 2.53. Configuration parameters passed to Query
ParameterDescriptionValuesDefault value
spec:
  query:
    options: {}

Configuration options that define the Query service.

  
options:
  log-level:

Logging level for Query.

Possible values: debug, info, warn, error, fatal, panic.

 
options:
  query:
    base-path:

The base path for all jaeger-query HTTP routes can be set to a non-root value, for example, /jaeger would cause all UI URLs to start with /jaeger. This can be useful when running jaeger-query behind a reverse proxy.

/<path>

 

Sample Query configuration

apiVersion: jaegertracing.io/v1
kind: "Jaeger"
metadata:
  name: "my-jaeger"
spec:
  strategy: allInOne
  allInOne:
    options:
      log-level: debug
      query:
        base-path: /jaeger

2.29.4.9. Ingester configuration options

Ingester is a service that reads from a Kafka topic and writes to the Elasticsearch storage backend. If you are using the allInOne or production deployment strategies, you do not need to configure the Ingester service.

Table 2.54. Jaeger parameters passed to the Ingester
ParameterDescriptionValues
spec:
  ingester:
    options: {}

Configuration options that define the Ingester service.

 
options:
  deadlockInterval:

Specifies the interval, in seconds or minutes, that the Ingester must wait for a message before terminating. The deadlock interval is disabled by default (set to 0), to avoid terminating the Ingester when no messages arrive during system initialization.

Minutes and seconds, for example, 1m0s. Default value is 0.

options:
  kafka:
    consumer:
      topic:

The topic parameter identifies the Kafka configuration used by the collector to produce the messages, and the Ingester to consume the messages.

Label for the consumer. For example, jaeger-spans.

options:
  kafka:
    consumer:
      brokers:

Identifies the Kafka configuration used by the Ingester to consume the messages.

Label for the broker, for example, my-cluster-kafka-brokers.kafka:9092.

options:
  log-level:

Logging level for the Ingester.

Possible values: debug, info, warn, error, fatal, dpanic, panic.

Streaming Collector and Ingester example

apiVersion: jaegertracing.io/v1
kind: Jaeger
metadata:
  name: simple-streaming
spec:
  strategy: streaming
  collector:
    options:
      kafka:
        producer:
          topic: jaeger-spans
          brokers: my-cluster-kafka-brokers.kafka:9092
  ingester:
    options:
      kafka:
        consumer:
          topic: jaeger-spans
          brokers: my-cluster-kafka-brokers.kafka:9092
      ingester:
        deadlockInterval: 5
  storage:
    type: elasticsearch
    options:
      es:
        server-urls: http://elasticsearch:9200

2.30. Uninstalling Service Mesh

To uninstall Red Hat OpenShift Service Mesh from an existing OpenShift Container Platform instance and remove its resources, you must delete the control plane, delete the Operators, and run commands to manually remove some resources.

2.30.1. Removing the Red Hat OpenShift Service Mesh control plane

To uninstall Service Mesh from an existing OpenShift Container Platform instance, first you delete the Service Mesh control plane and the Operators. Then, you run commands to remove residual resources.

2.30.1.1. Removing the Service Mesh control plane using the web console

You can remove the Red Hat OpenShift Service Mesh control plane by using the web console.

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. Click the Project menu and select the project where you installed the Service Mesh control plane, for example istio-system.
  3. Navigate to Operators Installed Operators.
  4. Click Service Mesh Control Plane under Provided APIs.
  5. Click the ServiceMeshControlPlane menu kebab .
  6. Click Delete Service Mesh Control Plane.
  7. Click Delete on the confirmation dialog window to remove the ServiceMeshControlPlane.

2.30.1.2. Removing the Service Mesh control plane using the CLI

You can remove the Red Hat OpenShift Service Mesh control plane by using the CLI. In this example, istio-system is the name of the control plane project.

Procedure

  1. Log in to the OpenShift Container Platform CLI.
  2. Run the following command to delete the ServiceMeshMemberRoll resource.

    $ oc delete smmr -n istio-system default
  3. Run this command to retrieve the name of the installed ServiceMeshControlPlane:

    $ oc get smcp -n istio-system
  4. Replace <name_of_custom_resource> with the output from the previous command, and run this command to remove the custom resource:

    $ oc delete smcp -n istio-system <name_of_custom_resource>

2.30.2. Removing the installed Operators

You must remove the Operators to successfully remove Red Hat OpenShift Service Mesh. After you remove the Red Hat OpenShift Service Mesh Operator, you must remove the Kiali Operator, the Red Hat OpenShift distributed tracing platform (Jaeger) Operator, and the OpenShift Elasticsearch Operator.

2.30.2.1. Removing the Operators

Follow this procedure to remove the Operators that make up Red Hat OpenShift Service Mesh. Repeat the steps for each of the following Operators.

  • Red Hat OpenShift Service Mesh
  • Kiali
  • Red Hat OpenShift distributed tracing platform (Jaeger)
  • OpenShift Elasticsearch

Procedure

  1. Log in to the OpenShift Container Platform web console.
  2. From the Operators Installed Operators page, scroll or type a keyword into the Filter by name to find each Operator. Then, click the Operator name.
  3. On the Operator Details page, select Uninstall Operator from the Actions menu. Follow the prompts to uninstall each Operator.

2.30.3. Clean up Operator resources

You can manually remove resources left behind after removing the Red Hat OpenShift Service Mesh Operator using the OpenShift Container Platform web console.

Prerequisites

  • An account with cluster administration access. If you use Red Hat OpenShift Dedicated, you must have an account with the dedicated-admin role.
  • Access to the OpenShift CLI (oc).

Procedure

  1. Log in to the OpenShift Container Platform CLI as a cluster administrator.
  2. Run the following commands to clean up resources after uninstalling the Operators. If you intend to keep using distributed tracing platform (Jaeger) as a stand-alone service without service mesh, do not delete the Jaeger resources.

    Note

    The OpenShift Elasticsearch Operator is installed in openshift-operators-redhat by default. The other Operators are installed in the openshift-operators namespace by default. If you installed the Operators in another namespace, replace openshift-operators with the name of the project where the Red Hat OpenShift Service Mesh Operator was installed.

    $ oc -n openshift-operators delete ds -lmaistra-version
    $ oc delete clusterrole/istio-admin clusterrole/istio-cni clusterrolebinding/istio-cni clusterrole/ossm-cni clusterrolebinding/ossm-cni
    $ oc delete clusterrole istio-view istio-edit
    $ oc delete clusterrole jaegers.jaegertracing.io-v1-admin jaegers.jaegertracing.io-v1-crdview jaegers.jaegertracing.io-v1-edit jaegers.jaegertracing.io-v1-view
    $ oc get crds -o name | grep '.*\.istio\.io' | xargs -r -n 1 oc delete
    $ oc get crds -o name | grep '.*\.maistra\.io' | xargs -r -n 1 oc delete
    $ oc get crds -o name | grep '.*\.kiali\.io' | xargs -r -n 1 oc delete
    $ oc delete crds jaegers.jaegertracing.io
    $ oc delete cm -n openshift-operators -lmaistra-version
    $ oc delete sa -n openshift-operators -lmaistra-version
Red Hat logoGithubRedditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja oBlog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

© 2024 Red Hat, Inc.