Este conteúdo não está disponível no idioma selecionado.
4.10. ePowerSwitch
Table 4.11, “ePowerSwitch” lists the fence device parameters used by
fence_eps, the fence agent for ePowerSwitch.
| luci Field | cluster.conf Attribute | Description |
|---|---|---|
| Name | name | A name for the ePowerSwitch device connected to the cluster. |
| IP Address or Hostname | ipaddr | The IP address or host name assigned to the device. |
| Login | login | The login name used to access the device. |
| Password | passwd | The password used to authenticate the connection to the device. |
| Password Script (optional) | passwd_script | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Name of Hidden Page | hidden_page | The name of the hidden page for the device. |
| Times to Retry Power On Operation | retry_on | Number of attempts to retry a power on operation. The default value is 1. |
| Port (Outlet) Number | port | Physical plug number or name of virtual machine. |
| Delay (optional) | delay | The number of seconds to wait before fencing is started. The default value is 0. |
Figure 4.9, “ePowerSwitch” shows the configuration screen for adding an ePowerSwitch fence device.
Figure 4.9. ePowerSwitch
The following command creates a fence device instance for an ePowerSwitch device:
ccs -f cluster.conf --addfencedev epstest1 agent=fence_eps ipaddr=192.168.0.1 login=root passwd=password123 \ hidden_page=hidden.htm
The following is the
cluster.conf entry for the fence_eps device:
<fencedevices>
<fencedevice agent="fence_eps" hidden_page="hidden.htm" ipaddr="192.168.0.1" login="root" name="epstest1" \
passwd="password123"/>
</fencedevices>
