Este conteúdo não está disponível no idioma selecionado.
4.21. IBM iPDU
Table 4.22, “IBM iPDU (Red Hat Enterprise Linux 6.4 and later)” lists the fence device parameters used by
fence_ipdu, the fence agent for iPDU over SNMP devices.
| luci Field | cluster.conf Attribute | Description |
|---|---|---|
| Name | name | A name for the IBM iPDU device connected to the cluster into which the fence daemon logs by means of the SNMP protocol. |
| IP Address or Hostname | ipaddr | The IP address or host name assigned to the device. |
| UDP/TCP Port | udpport | The UDP/TCP port to use for connection with the device; the default value is 161. |
| Login | login | The login name used to access the device. |
| Password | passwd | The password used to authenticate the connection to the device. |
| Password Script (optional) | passwd_script | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| SNMP Version | snmp_version | The SNMP version to use (1, 2c, 3); the default value is 1. |
| SNMP Community | community | The SNMP community string; the default value is private. |
| SNMP Security Level | snmp_sec_level | The SNMP security level (noAuthNoPriv, authNoPriv, authPriv). |
| SNMP Authentication Protocol | snmp_auth_prot | The SNMP Authentication Protocol (MD5, SHA). |
| SNMP Privacy Protocol | snmp_priv_prot | The SNMP privacy protocol (DES, AES). |
| SNMP Privacy Protocol Password | snmp_priv_passwd | The SNMP privacy protocol password. |
| SNMP Privacy Protocol Script | snmp_priv_passwd_script | The script that supplies a password for SNMP privacy protocol. Using this supersedes the parameter. |
| Power Wait (seconds) | power_wait | Number of seconds to wait after issuing a power off or power on command. |
| Power Timeout (seconds) | power_timeout | Number of seconds to continue testing for a status change after issuing a power off or power on command. The default value is 20. |
| Shell Timeout (seconds) | shell_timeout | Number of seconds to wait for a command prompt after issuing a command. The default value is 3. |
| Login Timeout (seconds) | login_timeout | Number of seconds to wait for a command prompt after login. The default value is 5. |
| Times to Retry Power On Operation | retry_on | Number of attempts to retry a power on operation. The default value is 1. |
| Port (Outlet) Number | port | Physical plug number or name of virtual machine. |
| Delay (optional) | delay | The number of seconds to wait before fencing is started. The default value is 0. |
Figure 4.16, “IBM iPDU” shows the configuration screen for adding an IBM iPDU fence device.
Figure 4.16. IBM iPDU
The following command creates a fence device instance for an IBM iPDU device:
ccs -f cluster.conf --addfencedev ipdutest1 agent=fence_ipdu community=ipdusnmpcom ipaddr=192.168.0.1 login=root \ passwd=password123 snmp_priv_passwd=snmpasswd123 power_wait=60 snmp_priv_prot=AES udpport=111
The following is the
cluster.conf entry for the fence_ipdu device:
<fencedevices> <fencedevice agent="fence_ipdu" community="ipdusnmpcom" ipaddr="ipduhost" login="root" name="ipdutest1" \ passwd="password123" power_wait="60" snmp_priv_passwd="ipduprivprotpasswd" snmp_priv_prot="AES" \ udpport="111"/> </fencedevices>
