Este conteúdo não está disponível no idioma selecionado.

Chapter 13. Custom resource API reference

PDF

13.1. Common configuration properties

Common configuration properties apply to more than one resource.

13.1.1. `replicas`

Use the replicas property to configure replicas.

The type of replication depends on the resource.

KafkaTopic uses a replication factor to configure the number of replicas of each partition within a Kafka cluster.
Kafka components use replicas to configure the number of pods in a deployment to provide better availability and scalability.

Note

When running a Kafka component on OpenShift it may not be necessary to run multiple replicas for high availability. When the node where the component is deployed crashes, OpenShift will automatically reschedule the Kafka component pod to a different node. However, running Kafka components with multiple replicas can provide faster failover times as the other nodes will be up and running.

13.1.2. `bootstrapServers`

Use the bootstrapServers property to configure a list of bootstrap servers.

The bootstrap server lists can refer to Kafka clusters that are not deployed in the same OpenShift cluster. They can also refer to a Kafka cluster not deployed by AMQ Streams.

If on the same OpenShift cluster, each list must ideally contain the Kafka cluster bootstrap service which is named CLUSTER-NAME-kafka-bootstrap and a port number. If deployed by AMQ Streams but on different OpenShift clusters, the list content depends on the approach used for exposing the clusters (routes, ingress, nodeports or loadbalancers).

When using Kafka with a Kafka cluster not managed by AMQ Streams, you can specify the bootstrap servers list according to the configuration of the given cluster.

13.1.3. `ssl`

Use the three allowed ssl configuration options for client connection using a specific cipher suite for a TLS version. A cipher suite combines algorithms for secure connection and data transfer.

You can also configure the ssl.endpoint.identification.algorithm property to enable or disable hostname verification.

Example SSL configuration

# ...
spec:
  config:
    ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384" 1
    ssl.enabled.protocols: "TLSv1.2" 2
    ssl.protocol: "TLSv1.2" 3
    ssl.endpoint.identification.algorithm: HTTPS 4
# ...

1: The cipher suite for TLS using a combination of ECDHE key exchange mechanism, RSA authentication algorithm, AES bulk encyption algorithm and SHA384 MAC algorithm.
2: The SSl protocol TLSv1.2 is enabled.
3: Specifies the TLSv1.2 protocol to generate the SSL context. Allowed values are TLSv1.1 and TLSv1.2.
4: Hostname verification is enabled by setting to HTTPS. An empty string disables the verification.

13.1.4. `trustedCertificates`

Having set tls to configure TLS encryption, use the trustedCertificates property to provide a list of secrets with key names under which the certificates are stored in X.509 format.

You can use the secrets created by the Cluster Operator for the Kafka cluster, or you can create your own TLS certificate file, then create a Secret from the file:

oc create secret generic MY-SECRET \
--from-file=MY-TLS-CERTIFICATE-FILE.crt

Example TLS encryption configuration

tls:
  trustedCertificates:
    - secretName: my-cluster-cluster-cert
      certificate: ca.crt
    - secretName: my-cluster-cluster-cert
      certificate: ca2.crt

If certificates are stored in the same secret, it can be listed multiple times.

If you want to enable TLS, but use the default set of public certification authorities shipped with Java, you can specify trustedCertificates as an empty array:

Example of enabling TLS with the default Java certificates

tls:
  trustedCertificates: []

For information on configuring TLS client authentication, see KafkaClientAuthenticationTls schema reference.

13.1.5. `resources`

You request CPU and memory resources for components. Limits specify the maximum resources that can be consumed by a given container.

Resource requests and limits for the Topic Operator and User Operator are set in the Kafka resource.

Use the reources.requests and resources.limits properties to configure resource requests and limits.

For every deployed container, AMQ Streams allows you to request specific resources and define the maximum consumption of those resources.

AMQ Streams supports requests and limits for the following types of resources:

cpu
memory

AMQ Streams uses the OpenShift syntax for specifying these resources.

For more information about managing computing resources on OpenShift, see Managing Compute Resources for Containers.

Resource requests

Requests specify the resources to reserve for a given container. Reserving the resources ensures that they are always available.

Important

If the resource request is for more than the available free resources in the OpenShift cluster, the pod is not scheduled.

A request may be configured for one or more supported resources.

Example resource requests configuration

# ...
resources:
  requests:
    cpu: 12
    memory: 64Gi
# ...

Resource limits

Limits specify the maximum resources that can be consumed by a given container. The limit is not reserved and might not always be available. A container can use the resources up to the limit only when they are available. Resource limits should be always higher than the resource requests.

A resource may be configured for one or more supported limits.

Example resource limits configuration

# ...
resources:
  limits:
    cpu: 12
    memory: 64Gi
# ...

Supported CPU formats

CPU requests and limits are supported in the following formats:

Number of CPU cores as integer (5 CPU core) or decimal (2.5 CPU core).
Number or millicpus / millicores (100m) where 1000 millicores is the same 1 CPU core.

Example CPU units

# ...
resources:
  requests:
    cpu: 500m
  limits:
    cpu: 2.5
# ...

Note

The computing power of 1 CPU core may differ depending on the platform where OpenShift is deployed.

For more information on CPU specification, see the Meaning of CPU.

Supported memory formats

Memory requests and limits are specified in megabytes, gigabytes, mebibytes, and gibibytes.

To specify memory in megabytes, use the M suffix. For example 1000M.
To specify memory in gigabytes, use the G suffix. For example 1G.
To specify memory in mebibytes, use the Mi suffix. For example 1000Mi.
To specify memory in gibibytes, use the Gi suffix. For example 1Gi.

Example resources using different memory units

# ...
resources:
  requests:
    memory: 512Mi
  limits:
    memory: 2Gi
# ...

For more details about memory specification and additional supported units, see Meaning of memory.

13.1.6. `image`

Use the image property to configure the container image used by the component.

Overriding container images is recommended only in special situations where you need to use a different container registry or a customized image.

For example, if your network does not allow access to the container repository used by AMQ Streams, you can copy the AMQ Streams images or build them from the source. However, if the configured image is not compatible with AMQ Streams images, it might not work properly.

A copy of the container image might also be customized and used for debugging.

You can specify which container image to use for a component using the image property in the following resources:

Kafka.spec.kafka
Kafka.spec.zookeeper
Kafka.spec.entityOperator.topicOperator
Kafka.spec.entityOperator.userOperator
Kafka.spec.entityOperator.tlsSidecar
KafkaConnect.spec
KafkaConnectS2I.spec
KafkaMirrorMaker.spec
KafkaMirrorMaker2.spec
KafkaBridge.spec

Configuring the image property for Kafka, Kafka Connect, and Kafka MirrorMaker

Kafka, Kafka Connect (including Kafka Connect with S2I support), and Kafka MirrorMaker support multiple versions of Kafka. Each component requires its own image. The default images for the different Kafka versions are configured in the following environment variables:

STRIMZI_KAFKA_IMAGES
STRIMZI_KAFKA_CONNECT_IMAGES
STRIMZI_KAFKA_CONNECT_S2I_IMAGES
STRIMZI_KAFKA_MIRROR_MAKER_IMAGES

These environment variables contain mappings between the Kafka versions and their corresponding images. The mappings are used together with the image and version properties:

If neither image nor version are given in the custom resource then the version will default to the Cluster Operator’s default Kafka version, and the image will be the one corresponding to this version in the environment variable.
If image is given but version is not, then the given image is used and the version is assumed to be the Cluster Operator’s default Kafka version.
If version is given but image is not, then the image that corresponds to the given version in the environment variable is used.
If both version and image are given, then the given image is used. The image is assumed to contain a Kafka image with the given version.

The image and version for the different components can be configured in the following properties:

For Kafka in spec.kafka.image and spec.kafka.version.
For Kafka Connect, Kafka Connect S2I, and Kafka MirrorMaker in spec.image and spec.version.

Warning

It is recommended to provide only the version and leave the image property unspecified. This reduces the chance of making a mistake when configuring the custom resource. If you need to change the images used for different versions of Kafka, it is preferable to configure the Cluster Operator’s environment variables.

Configuring the image property in other resources

For the image property in the other custom resources, the given value will be used during deployment. If the image property is missing, the image specified in the Cluster Operator configuration will be used. If the image name is not defined in the Cluster Operator configuration, then the default value will be used.

For Topic Operator:
1. Container image specified in the STRIMZI_DEFAULT_TOPIC_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-rhel8-operator:1.8.4 container image.
For User Operator:
1. Container image specified in the STRIMZI_DEFAULT_USER_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-rhel8-operator:1.8.4 container image.
For Entity Operator TLS sidecar:
1. Container image specified in the STRIMZI_DEFAULT_TLS_SIDECAR_ENTITY_OPERATOR_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-kafka-28-rhel8:1.8.4 container image.
For Kafka Exporter:
1. Container image specified in the STRIMZI_DEFAULT_KAFKA_EXPORTER_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-kafka-28-rhel8:1.8.4 container image.
For Kafka Bridge:
1. Container image specified in the STRIMZI_DEFAULT_KAFKA_BRIDGE_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-bridge-rhel8:1.8.4 container image.
For Kafka broker initializer:
1. Container image specified in the STRIMZI_DEFAULT_KAFKA_INIT_IMAGE environment variable from the Cluster Operator configuration.
2. registry.redhat.io/amq7/amq-streams-rhel8-operator:1.8.4 container image.

Example of container image configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    image: my-org/my-image:latest
    # ...
  zookeeper:
    # ...

13.1.7. `livenessProbe` and `readinessProbe` healthchecks

Use the livenessProbe and readinessProbe properties to configure healthcheck probes supported in AMQ Streams.

Healthchecks are periodical tests which verify the health of an application. When a Healthcheck probe fails, OpenShift assumes that the application is not healthy and attempts to fix it.

For more details about the probes, see Configure Liveness and Readiness Probes.

Both livenessProbe and readinessProbe support the following options:

initialDelaySeconds
timeoutSeconds
periodSeconds
successThreshold
failureThreshold

Example of liveness and readiness probe configuration

# ...
readinessProbe:
  initialDelaySeconds: 15
  timeoutSeconds: 5
livenessProbe:
  initialDelaySeconds: 15
  timeoutSeconds: 5
# ...

For more information about the livenessProbe and readinessProbe options, see Probe schema reference.

13.1.8. `metricsConfig`

Use the metricsConfig property to enable and configure Prometheus metrics.

The metricsConfig property contains a reference to a ConfigMap containing additional configuration for the Prometheus JMX exporter. AMQ Streams supports Prometheus metrics using Prometheus JMX exporter to convert the JMX metrics supported by Apache Kafka and ZooKeeper to Prometheus metrics.

To enable Prometheus metrics export without further configuration, you can reference a ConfigMap containing an empty file under metricsConfig.valueFrom.configMapKeyRef.key. When referencing an empty file, all metrics are exposed as long as they have not been renamed.

Example ConfigMap with metrics configuration for Kafka

kind: ConfigMap
apiVersion: v1
metadata:
  name: my-configmap
data:
  my-key: |
    lowercaseOutputName: true
    rules:
    # Special cases and very specific rules
    - pattern: kafka.server<type=(.+), name=(.+), clientId=(.+), topic=(.+), partition=(.*)><>Value
      name: kafka_server_$1_$2
      type: GAUGE
      labels:
       clientId: "$3"
       topic: "$4"
       partition: "$5"
    # further configuration

Example metrics configuration for Kafka

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    metricsConfig:
      type: jmxPrometheusExporter
      valueFrom:
        configMapKeyRef:
          name: my-config-map
          key: my-key
    # ...
  zookeeper:
    # ...

When metrics are enabled, they are exposed on port 9404.

When the metricsConfig (or deprecated metrics) property is not defined in the resource, the Prometheus metrics are disabled.

For more information about setting up and deploying Prometheus and Grafana, see Introducing Metrics to Kafka in the Deploying and Upgrading AMQ Streams on OpenShift guide.

13.1.9. `jvmOptions`

The following AMQ Streams components run inside a Java Virtual Machine (JVM):

Apache Kafka
Apache ZooKeeper
Apache Kafka Connect
Apache Kafka MirrorMaker
AMQ Streams Kafka Bridge

To optimize their performance on different platforms and architectures, you configure the jvmOptions property in the following resources:

Kafka.spec.kafka
Kafka.spec.zookeeper
KafkaConnect.spec
KafkaConnectS2I.spec
KafkaMirrorMaker.spec
KafkaMirrorMaker2.spec
KafkaBridge.spec

You can specify the following options in your configuration:

-Xms: Minimum initial allocation heap size when the JVM starts.
-Xmx: Maximum heap size.
-XX: Advanced runtime options for the JVM.
javaSystemProperties: Additional system properties.
gcLoggingEnabled: Enables garbage collector logging.

The full schema of jvmOptions is described in JvmOptions schema reference.

Note

The units accepted by JVM settings, such as -Xmx and -Xms, are the same units accepted by the JDK java binary in the corresponding image. Therefore, 1g or 1G means 1,073,741,824 bytes, and Gi is not a valid unit suffix. This is different from the units used for memory requests and limits, which follow the OpenShift convention where 1G means 1,000,000,000 bytes, and 1Gi means 1,073,741,824 bytes

-Xms and -Xmx options

The default values used for -Xms and -Xmx depend on whether there is a memory request limit configured for the container.

If there is a memory limit, the JVM’s minimum and maximum memory is set to a value corresponding to the limit.
If there is no memory limit, the JVM’s minimum memory is set to 128M. The JVM’s maximum memory is not defined to allow the memory to increase as needed. This is ideal for single node environments in test and development.

Before setting -Xmx explicitly consider the following:

The JVM’s overall memory usage will be approximately 4 × the maximum heap, as configured by -Xmx.
If -Xmx is set without also setting an appropriate OpenShift memory limit, it is possible that the container will be killed should the OpenShift node experience memory pressure from other Pods running on it.
If -Xmx is set without also setting an appropriate OpenShift memory request, it is possible that the container will be scheduled to a node with insufficient memory. In this case, the container will not start but crash immediately if -Xms is set to -Xmx, or at a later time if not.

It is recommended to:

Set the memory request and the memory limit to the same value
Use a memory request that is at least 4.5 × the -Xmx
Consider setting -Xms to the same value as -Xmx

In this example, the JVM uses 2 GiB (=2,147,483,648 bytes) for its heap. Its total memory usage is approximately 8GiB.

Example -Xmx and -Xms configuration

# ...
jvmOptions:
  "-Xmx": "2g"
  "-Xms": "2g"
# ...

Setting the same value for initial (-Xms) and maximum (-Xmx) heap sizes avoids the JVM having to allocate memory after startup, at the cost of possibly allocating more heap than is really needed.

Important

Containers performing lots of disk I/O, such as Kafka broker containers, require available memory for use as an operating system page cache. On such containers, the requested memory should be significantly higher than the memory used by the JVM.

-XX option

-XX options are used to configure the KAFKA_JVM_PERFORMANCE_OPTS option of Apache Kafka.

Example -XX configuration

jvmOptions:
  "-XX":
    "UseG1GC": true
    "MaxGCPauseMillis": 20
    "InitiatingHeapOccupancyPercent": 35
    "ExplicitGCInvokesConcurrent": true

JVM options resulting from the -XX configuration

-XX:+UseG1GC -XX:MaxGCPauseMillis=20 -XX:InitiatingHeapOccupancyPercent=35 -XX:+ExplicitGCInvokesConcurrent -XX:-UseParNewGC

Note

When no -XX options are specified, the default Apache Kafka configuration of KAFKA_JVM_PERFORMANCE_OPTS is used.

javaSystemProperties

javaSystemProperties are used to configure additional Java system properties, such as debugging utilities.

Example javaSystemProperties configuration

jvmOptions:
  javaSystemProperties:
    - name: javax.net.debug
      value: ssl

13.1.10. Garbage collector logging

The jvmOptions property also allows you to enable and disable garbage collector (GC) logging. GC logging is disabled by default. To enable it, set the gcLoggingEnabled property as follows:

Example GC logging configuration

# ...
jvmOptions:
  gcLoggingEnabled: true
# ...

13.2. Schema properties

13.2.1. `Kafka` schema reference

Property	Description
spec	The specification of the Kafka and ZooKeeper clusters, and Topic Operator.
`KafkaSpec`
status	The status of the Kafka and ZooKeeper clusters, and Topic Operator.
`KafkaStatus`

13.2.2. `KafkaSpec` schema reference

Used in: Kafka

Property	Description
kafka	Configuration of the Kafka cluster.
`KafkaClusterSpec`	Configuration of the Kafka cluster.
zookeeper	Configuration of the ZooKeeper cluster.
`ZookeeperClusterSpec`	Configuration of the ZooKeeper cluster.
entityOperator	Configuration of the Entity Operator.
`EntityOperatorSpec`	Configuration of the Entity Operator.
clusterCa	Configuration of the cluster certificate authority.
`CertificateAuthority`	Configuration of the cluster certificate authority.
clientsCa	Configuration of the clients certificate authority.
`CertificateAuthority`	Configuration of the clients certificate authority.
cruiseControl	Configuration for Cruise Control deployment. Deploys a Cruise Control instance when specified.
`CruiseControlSpec`
kafkaExporter	Configuration of the Kafka Exporter. Kafka Exporter can provide additional metrics, for example lag of consumer group at topic/partition.
`KafkaExporterSpec`
maintenanceTimeWindows	A list of time windows for maintenance tasks (that is, certificates renewal). Each time window is defined by a cron expression.
string array

13.2.3. `KafkaClusterSpec` schema reference

Used in: KafkaSpec

Full list of KafkaClusterSpec schema properties

Configures a Kafka cluster.

13.2.3.1. `listeners`

Use the listeners property to configure listeners to provide access to Kafka brokers.

Example configuration of a plain (unencrypted) listener without authentication

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  kafka:
    # ...
    listeners:
      - name: plain
        port: 9092
        type: internal
        tls: false
    # ...
  zookeeper:
    # ...

13.2.3.2. `config`

Use the config properties to configure Kafka broker options as keys.

Standard Apache Kafka configuration may be provided, restricted to those properties not managed directly by AMQ Streams.

Configuration options that cannot be configured relate to:

Security (Encryption, Authentication, and Authorization)
Listener configuration
Broker ID configuration
Configuration of log data directories
Inter-broker communication
ZooKeeper connectivity

The values can be one of the following JSON types:

String
Number
Boolean

You can specify and configure the options listed in the Apache Kafka documentation with the exception of those options that are managed directly by AMQ Streams. Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

listeners
advertised.
broker.
listener.
host.name
port
inter.broker.listener.name
sasl.
ssl.
security.
password.
principal.builder.class
log.dir
zookeeper.connect
zookeeper.set.acl
authorizer.
super.user

When a forbidden option is present in the config property, it is ignored and a warning message is printed to the Cluster Operator log file. All other supported options are passed to Kafka.

There are exceptions to the forbidden options. For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties. You can also configure the zookeeper.connection.timeout.ms property to set the maximum time allowed for establishing a ZooKeeper connection.

Example Kafka broker configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    config:
      num.partitions: 1
      num.recovery.threads.per.data.dir: 1
      default.replication.factor: 3
      offsets.topic.replication.factor: 3
      transaction.state.log.replication.factor: 3
      transaction.state.log.min.isr: 1
      log.retention.hours: 168
      log.segment.bytes: 1073741824
      log.retention.check.interval.ms: 300000
      num.network.threads: 3
      num.io.threads: 8
      socket.send.buffer.bytes: 102400
      socket.receive.buffer.bytes: 102400
      socket.request.max.bytes: 104857600
      group.initial.rebalance.delay.ms: 0
      ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"
      ssl.enabled.protocols: "TLSv1.2"
      ssl.protocol: "TLSv1.2"
      zookeeper.connection.timeout.ms: 6000
    # ...

13.2.3.3. `brokerRackInitImage`

When rack awareness is enabled, Kafka broker pods use init container to collect the labels from the OpenShift cluster nodes. The container image used for this container can be configured using the brokerRackInitImage property. When the brokerRackInitImage field is missing, the following images are used in order of priority:

Container image specified in STRIMZI_DEFAULT_KAFKA_INIT_IMAGE environment variable in the Cluster Operator configuration.
registry.redhat.io/amq7/amq-streams-rhel8-operator:1.8.4 container image.

Example brokerRackInitImage configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    brokerRackInitImage: my-org/my-image:latest
    # ...

Note

Overriding container images is recommended only in special situations, where you need to use a different container registry. For example, because your network does not allow access to the container registry used by AMQ Streams. In this case, you should either copy the AMQ Streams images or build them from the source. If the configured image is not compatible with AMQ Streams images, it might not work properly.

13.2.3.4. `logging`

Kafka has its own configurable loggers:

log4j.logger.org.I0Itec.zkclient.ZkClient
log4j.logger.org.apache.zookeeper
log4j.logger.kafka
log4j.logger.org.apache.kafka
log4j.logger.kafka.request.logger
log4j.logger.kafka.network.Processor
log4j.logger.kafka.server.KafkaApis
log4j.logger.kafka.network.RequestChannel$
log4j.logger.kafka.controller
log4j.logger.kafka.log.LogCleaner
log4j.logger.state.change.logger
log4j.logger.kafka.authorizer.logger

Kafka uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  kafka:
    # ...
    logging:
      type: inline
      loggers:
        kafka.root.logger.level: "INFO"
  # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: kafka-log4j.properties
  # ...

Any available loggers that are not configured have their level set to OFF.

If Kafka was deployed using the Cluster Operator, changes to Kafka logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.3.5. `KafkaClusterSpec` schema properties

Property	Description
version	The kafka broker version. Defaults to 2.8.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.
string
replicas	The number of pods in the cluster.
integer	The number of pods in the cluster.
image	The docker image for the pods. The default value depends on the configured `Kafka.spec.kafka.version`.
string
listeners	Configures listeners of Kafka brokers.
`GenericKafkaListener` array	Configures listeners of Kafka brokers.
config	Kafka broker config properties with the following prefixes cannot be set: listeners, advertised., broker., listener., host.name, port, inter.broker.listener.name, sasl., ssl., security., password., principal.builder.class, log.dir, zookeeper.connect, zookeeper.set.acl, zookeeper.ssl, zookeeper.clientCnxnSocket, authorizer., super.user, cruise.control.metrics.topic, cruise.control.metrics.reporter.bootstrap.servers (with the exception of: zookeeper.connection.timeout.ms, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols,cruise.control.metrics.topic.num.partitions, cruise.control.metrics.topic.replication.factor, cruise.control.metrics.topic.retention.ms,cruise.control.metrics.topic.auto.create.retries, cruise.control.metrics.topic.auto.create.timeout.ms,cruise.control.metrics.topic.min.insync.replicas).
map
storage	Storage configuration (disk). Cannot be updated. The type depends on the value of the `storage.type` property within the given object, which must be one of [ephemeral, persistent-claim, jbod].
`EphemeralStorage`, `PersistentClaimStorage`, `JbodStorage`
authorization	Authorization configuration for Kafka brokers. The type depends on the value of the `authorization.type` property within the given object, which must be one of [simple, opa, keycloak, custom].
`KafkaAuthorizationSimple`, `KafkaAuthorizationOpa`, `KafkaAuthorizationKeycloak`, `KafkaAuthorizationCustom`
rack	Configuration of the `broker.rack` broker config.
`Rack`	Configuration of the `broker.rack` broker config.
brokerRackInitImage	The image of the init container used for initializing the `broker.rack`.
string
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
jmxOptions	JMX Options for Kafka brokers.
`KafkaJmxOptions`	JMX Options for Kafka brokers.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`
logging	Logging configuration for Kafka. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
template	Template for Kafka cluster resources. The template allows users to specify how are the `StatefulSet`, `Pods` and `Services` generated.
`KafkaClusterTemplate`

13.2.4. `GenericKafkaListener` schema reference

Used in: KafkaClusterSpec

Full list of GenericKafkaListener schema properties

Configures listeners to connect to Kafka brokers within and outside OpenShift.

You configure the listeners in the Kafka resource.

Example Kafka resource showing listener configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    #...
    listeners:
      - name: plain
        port: 9092
        type: internal
        tls: false
      - name: tls
        port: 9093
        type: internal
        tls: true
        authentication:
          type: tls
      - name: external1
        port: 9094
        type: route
        tls: true
      - name: external2
        port: 9095
        type: ingress
        tls: true
        authentication:
          type: tls
        configuration:
          bootstrap:
            host: bootstrap.myingress.com
          brokers:
          - broker: 0
            host: broker-0.myingress.com
          - broker: 1
            host: broker-1.myingress.com
          - broker: 2
            host: broker-2.myingress.com
    #...

13.2.4.1. `listeners`

You configure Kafka broker listeners using the listeners property in the Kafka resource. Listeners are defined as an array.

Example listener configuration

listeners:
  - name: plain
    port: 9092
    type: internal
    tls: false

The name and port must be unique within the Kafka cluster. The name can be up to 25 characters long, comprising lower-case letters and numbers. Allowed port numbers are 9092 and higher with the exception of ports 9404 and 9999, which are already used for Prometheus and JMX.

By specifying a unique name and port for each listener, you can configure multiple listeners.

13.2.4.2. `type`

The type is set as internal, or for external listeners, as route, loadbalancer, nodeport or ingress.

internal

You can configure internal listeners with or without encryption using the tls property.

Example internal listener configuration

#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: plain
        port: 9092
        type: internal
        tls: false
      - name: tls
        port: 9093
        type: internal
        tls: true
        authentication:
          type: tls
    #...

route

Configures an external listener to expose Kafka using OpenShift Routes and the HAProxy router.

A dedicated Route is created for every Kafka broker pod. An additional Route is created to serve as a Kafka bootstrap address. Kafka clients can use these Routes to connect to Kafka on port 443. The client connects on port 443, the default router port, but traffic is then routed to the port you configure, which is 9094 in this example.

Example route listener configuration

#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external1
        port: 9094
        type: route
        tls: true
    #...

ingress

Configures an external listener to expose Kafka using Kubernetes Ingress and the NGINX Ingress Controller for Kubernetes.

A dedicated Ingress resource is created for every Kafka broker pod. An additional Ingress resource is created to serve as a Kafka bootstrap address. Kafka clients can use these Ingress resources to connect to Kafka on port 443. The client connects on port 443, the default controller port, but traffic is then routed to the port you configure, which is 9095 in the following example.

You must specify the hostnames used by the bootstrap and per-broker services using GenericKafkaListenerConfigurationBootstrap and GenericKafkaListenerConfigurationBroker properties.

Example ingress listener configuration

#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external2
        port: 9095
        type: ingress
        tls: true
        authentication:
          type: tls
        configuration:
          bootstrap:
            host: bootstrap.myingress.com
          brokers:
          - broker: 0
            host: broker-0.myingress.com
          - broker: 1
            host: broker-1.myingress.com
          - broker: 2
            host: broker-2.myingress.com
  #...

Note

External listeners using Ingress are currently only tested with the NGINX Ingress Controller for Kubernetes.

loadbalancer

Configures an external listener to expose Kafka Loadbalancer type Services.

A new loadbalancer service is created for every Kafka broker pod. An additional loadbalancer is created to serve as a Kafka bootstrap address. Loadbalancers listen to the specified port number, which is port 9094 in the following example.

You can use the loadBalancerSourceRanges property to configure source ranges to restrict access to the specified IP addresses.

Example loadbalancer listener configuration

#...
spec:
  kafka:
    #...
    listeners:
      - name: external3
        port: 9094
        type: loadbalancer
        tls: true
        configuration:
          loadBalancerSourceRanges:
            - 10.0.0.0/8
            - 88.208.76.87/32
    #...

nodeport

Configures an external listener to expose Kafka using NodePort type Services.

Kafka clients connect directly to the nodes of OpenShift. An additional NodePort type of service is created to serve as a Kafka bootstrap address.

When configuring the advertised addresses for the Kafka broker pods, AMQ Streams uses the address of the node on which the given pod is running. You can use preferredNodePortAddressType property to configure the first address type checked as the node address.

Example nodeport listener configuration

#...
spec:
  kafka:
    #...
    listeners:
      #...
      - name: external4
        port: 9095
        type: nodeport
        tls: false
        configuration:
          preferredNodePortAddressType: InternalDNS
    #...

Note

TLS hostname verification is not currently supported when exposing Kafka clusters using node ports.

13.2.4.3. `port`

The port number is the port used in the Kafka cluster, which might not be the same port used for access by a client.

loadbalancer listeners use the specified port number, as do internal listeners
ingress and route listeners use port 443 for access
nodeport listeners use the port number assigned by OpenShift

For client connection, use the address and port for the bootstrap service of the listener. You can retrieve this from the status of the Kafka resource.

Example command to retrieve the address and port for client connection

oc get kafka KAFKA-CLUSTER-NAME -o=jsonpath='{.status.listeners[?(@.type=="external")].bootstrapServers}{"\n"}'

Note

Listeners cannot be configured to use the ports set aside for interbroker communication (9091) and metrics (9404).

13.2.4.4. `tls`

The TLS property is required.

By default, TLS encryption is not enabled. To enable it, set the tls property to true.

TLS encryption is always used with route listeners.

13.2.4.5. `authentication`

Authentication for the listener can be specified as:

Mutual TLS (tls)
SCRAM-SHA-512 (scram-sha-512)
Token-based OAuth 2.0 (oauth).

13.2.4.6. `networkPolicyPeers`

Use networkPolicyPeers to configure network policies that restrict access to a listener at the network level. The following example shows a networkPolicyPeers configuration for a plain and a tls listener.

listeners:
  #...
  - name: plain
    port: 9092
    type: internal
    tls: true
    authentication:
      type: scram-sha-512
    networkPolicyPeers:
      - podSelector:
          matchLabels:
            app: kafka-sasl-consumer
      - podSelector:
          matchLabels:
            app: kafka-sasl-producer
  - name: tls
    port: 9093
    type: internal
    tls: true
    authentication:
      type: tls
    networkPolicyPeers:
      - namespaceSelector:
          matchLabels:
            project: myproject
      - namespaceSelector:
          matchLabels:
            project: myproject2
# ...

In the example:

Only application pods matching the labels app: kafka-sasl-consumer and app: kafka-sasl-producer can connect to the plain listener. The application pods must be running in the same namespace as the Kafka broker.
Only application pods running in namespaces matching the labels project: myproject and project: myproject2 can connect to the tls listener.

The syntax of the networkPolicyPeers field is the same as the from field in NetworkPolicy resources.

13.2.4.7. `GenericKafkaListener` schema properties

Property	Description
name	Name of the listener. The name will be used to identify the listener and the related OpenShift objects. The name has to be unique within given a Kafka cluster. The name can consist of lowercase characters and numbers and be up to 11 characters long.
string
port	Port number used by the listener inside Kafka. The port number has to be unique within a given Kafka cluster. Allowed port numbers are 9092 and higher with the exception of ports 9404 and 9999, which are already used for Prometheus and JMX. Depending on the listener type, the port number might not be the same as the port number that connects Kafka clients.
integer
type	Type of the listener. Currently the supported types are `internal`, `route`, `loadbalancer`, `nodeport` and `ingress`. `internal` type exposes Kafka internally only within the OpenShift cluster. `route` type uses OpenShift Routes to expose Kafka. `loadbalancer` type uses LoadBalancer type services to expose Kafka. `nodeport` type uses NodePort type services to expose Kafka. `ingress` type uses OpenShift Nginx Ingress to expose Kafka.
string (one of [ingress, internal, route, loadbalancer, nodeport])
tls	Enables TLS encryption on the listener. This is a required property.
boolean
authentication	Authentication configuration for this listener. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, oauth].
`KafkaListenerAuthenticationTls`, `KafkaListenerAuthenticationScramSha512`, `KafkaListenerAuthenticationOAuth`
configuration	Additional listener configuration.
`GenericKafkaListenerConfiguration`	Additional listener configuration.
networkPolicyPeers	List of peers which should be able to connect to this listener. Peers in this list are combined using a logical OR operation. If this field is empty or missing, all connections will be allowed for this listener. If this field is present and contains at least one item, the listener only allows the traffic which matches at least one item in this list. For more information, see the external documentation for networking.k8s.io/v1 networkpolicypeer.
NetworkPolicyPeer array

13.2.5. `KafkaListenerAuthenticationTls` schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationTls type from KafkaListenerAuthenticationScramSha512, KafkaListenerAuthenticationOAuth. It must have the value tls for the type KafkaListenerAuthenticationTls.

Property	Description
type	Must be `tls`.
string	Must be `tls`.

13.2.6. `KafkaListenerAuthenticationScramSha512` schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationScramSha512 type from KafkaListenerAuthenticationTls, KafkaListenerAuthenticationOAuth. It must have the value scram-sha-512 for the type KafkaListenerAuthenticationScramSha512.

Property	Description
type	Must be `scram-sha-512`.
string	Must be `scram-sha-512`.

13.2.7. `KafkaListenerAuthenticationOAuth` schema reference

Used in: GenericKafkaListener

The type property is a discriminator that distinguishes use of the KafkaListenerAuthenticationOAuth type from KafkaListenerAuthenticationTls, KafkaListenerAuthenticationScramSha512. It must have the value oauth for the type KafkaListenerAuthenticationOAuth.

Property	Description
accessTokenIsJwt	Configure whether the access token is treated as JWT. This must be set to `false` if the authorization server returns opaque tokens. Defaults to `true`.
boolean
checkAccessTokenType	Configure whether the access token type check is performed or not. This should be set to `false` if the authorization server does not include 'typ' claim in JWT token. Defaults to `true`.
boolean
checkAudience	Enable or disable audience checking. Audience checks identify the recipients of tokens. If audience checking is enabled, the OAuth Client ID also has to be configured using the `clientId` property. The Kafka broker will reject tokens that do not have its `clientId` in their `aud` (audience) claim.Default value is `false`.
boolean
checkIssuer	Enable or disable issuer checking. By default issuer is checked using the value configured by `validIssuerUri`. Default value is `true`.
boolean
clientAudience	The audience to use when making requests to the authorization server’s token endpoint. Used for inter-broker authentication and for configuring OAuth 2.0 over PLAIN using the `clientId` and `secret` method.
string
clientId	OAuth Client ID which the Kafka broker can use to authenticate against the authorization server and use the introspect endpoint URI.
string
clientScope	The scope to use when making requests to the authorization server’s token endpoint. Used for inter-broker authentication and for configuring OAuth 2.0 over PLAIN using the `clientId` and `secret` method.
string
clientSecret	Link to OpenShift Secret containing the OAuth client secret which the Kafka broker can use to authenticate against the authorization server and use the introspect endpoint URI.
`GenericSecretSource`
customClaimCheck	JsonPath filter query to be applied to the JWT token or to the response of the introspection endpoint for additional token validation. Not set by default.
string
disableTlsHostnameVerification	Enable or disable TLS hostname verification. Default value is `false`.
boolean
enableECDSA	The `enableECDSA` property has been deprecated. Enable or disable ECDSA support by installing BouncyCastle crypto provider. ECDSA support is always enabled. The BouncyCastle libraries are no longer packaged with AMQ Streams. Value is ignored.
boolean
enableOauthBearer	Enable or disable OAuth authentication over SASL_OAUTHBEARER. Default value is `true`.
boolean
enablePlain	Enable or disable OAuth authentication over SASL_PLAIN. There is no re-authentication support when this mechanism is used. Default value is `false`.
boolean
fallbackUserNameClaim	The fallback username claim to be used for the user id if the claim specified by `userNameClaim` is not present. This is useful when `client_credentials` authentication only results in the client id being provided in another claim. It only takes effect if `userNameClaim` is set.
string
fallbackUserNamePrefix	The prefix to use with the value of `fallbackUserNameClaim` to construct the user id. This only takes effect if `fallbackUserNameClaim` is true, and the value is present for the claim. Mapping usernames and client ids into the same user id space is useful in preventing name collisions.
string
introspectionEndpointUri	URI of the token introspection endpoint which can be used to validate opaque non-JWT tokens.
string
jwksEndpointUri	URI of the JWKS certificate endpoint, which can be used for local JWT validation.
string
jwksExpirySeconds	Configures how often are the JWKS certificates considered valid. The expiry interval has to be at least 60 seconds longer then the refresh interval specified in `jwksRefreshSeconds`. Defaults to 360 seconds.
integer
jwksMinRefreshPauseSeconds	The minimum pause between two consecutive refreshes. When an unknown signing key is encountered the refresh is scheduled immediately, but will always wait for this minimum pause. Defaults to 1 second.
integer
jwksRefreshSeconds	Configures how often are the JWKS certificates refreshed. The refresh interval has to be at least 60 seconds shorter then the expiry interval specified in `jwksExpirySeconds`. Defaults to 300 seconds.
integer
maxSecondsWithoutReauthentication	Maximum number of seconds the authenticated session remains valid without re-authentication. This enables Apache Kafka re-authentication feature, and causes sessions to expire when the access token expires. If the access token expires before max time or if max time is reached, the client has to re-authenticate, otherwise the server will drop the connection. Not set by default - the authenticated session does not expire when the access token expires. This option only applies to SASL_OAUTHBEARER authentication mechanism (when `enableOauthBearer` is `true`).
integer
tlsTrustedCertificates	Trusted certificates for TLS connection to the OAuth server.
`CertSecretSource` array
tokenEndpointUri	URI of the Token Endpoint to use with SASL_PLAIN mechanism when the client authenticates with `clientId` and a `secret`. If set, the client can authenticate over SASL_PLAIN by either setting `username` to `clientId`, and setting `password` to client `secret`, or by setting `username` to account username, and `password` to access token prefixed with `$accessToken:`. If this option is not set, the `password` is always interpreted as an access token (without a prefix), and `username` as the account username (a so called 'no-client-credentials' mode).
string
type	Must be `oauth`.
string	Must be `oauth`.
userInfoEndpointUri	URI of the User Info Endpoint to use as a fallback to obtaining the user id when the Introspection Endpoint does not return information that can be used for the user id.
string
userNameClaim	Name of the claim from the JWT authentication token, Introspection Endpoint response or User Info Endpoint response which will be used to extract the user id. Defaults to `sub`.
string
validIssuerUri	URI of the token issuer used for authentication.
string	URI of the token issuer used for authentication.
validTokenType	Valid value for the `token_type` attribute returned by the Introspection Endpoint. No default value, and not checked by default.
string

13.2.8. `GenericSecretSource` schema reference

Used in: KafkaClientAuthenticationOAuth, KafkaListenerAuthenticationOAuth

Property	Description
key	The key under which the secret value is stored in the OpenShift Secret.
string
secretName	The name of the OpenShift Secret containing the secret value.
string

13.2.9. `CertSecretSource` schema reference

Used in: KafkaAuthorizationKeycloak, KafkaBridgeTls, KafkaClientAuthenticationOAuth, KafkaConnectTls, KafkaListenerAuthenticationOAuth, KafkaMirrorMaker2Tls, KafkaMirrorMakerTls

Property	Description
certificate	The name of the file certificate in the Secret.
string	The name of the file certificate in the Secret.
secretName	The name of the Secret containing the certificate.
string	The name of the Secret containing the certificate.

13.2.10. `GenericKafkaListenerConfiguration` schema reference

Used in: GenericKafkaListener

Full list of GenericKafkaListenerConfiguration schema properties

Configuration for Kafka listeners.

13.2.10.1. `brokerCertChainAndKey`

The brokerCertChainAndKey property is only used with listeners that have TLS encryption enabled. You can use the property to providing your own Kafka listener certificates.

Example configuration for a loadbalancer external listener with TLS encryption enabled

listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      brokerCertChainAndKey:
        secretName: my-secret
        certificate: my-listener-certificate.crt
        key: my-listener-key.key
# ...

13.2.10.2. `externalTrafficPolicy`

The externalTrafficPolicy property is used with loadbalancer and nodeport listeners. When exposing Kafka outside of OpenShift you can choose Local or Cluster. Local avoids hops to other nodes and preserves the client IP, whereas Cluster does neither. The default is Cluster.

13.2.10.3. `loadBalancerSourceRanges`

The loadBalancerSourceRanges property is only used with loadbalancer listeners. When exposing Kafka outside of OpenShift use source ranges, in addition to labels and annotations, to customize how a service is created.

Example source ranges configured for a loadbalancer listener

listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: false
    configuration:
      externalTrafficPolicy: Local
      loadBalancerSourceRanges:
        - 10.0.0.0/8
        - 88.208.76.87/32
      # ...
# ...

13.2.10.4. `class`

The class property is only used with ingress listeners. You can configure the Ingress class using the class property.

Example of an external listener of type ingress using Ingress class nginx-internal

listeners:
  #...
  - name: external
    port: 9094
    type: ingress
    tls: true
    configuration:
      class: nginx-internal
    # ...
# ...

13.2.10.5. `preferredNodePortAddressType`

The preferredNodePortAddressType property is only used with nodeport listeners.

Use the preferredNodePortAddressType property in your listener configuration to specify the first address type checked as the node address. This property is useful, for example, if your deployment does not have DNS support, or you only want to expose a broker internally through an internal DNS or IP address. If an address of this type is found, it is used. If the preferred address type is not found, AMQ Streams proceeds through the types in the standard order of priority:

ExternalDNS
ExternalIP
Hostname
InternalDNS
InternalIP

Example of an external listener configured with a preferred node port address type

listeners:
  #...
  - name: external
    port: 9094
    type: nodeport
    tls: false
    configuration:
      preferredNodePortAddressType: InternalDNS
      # ...
# ...

13.2.10.6. `useServiceDnsDomain`

The useServiceDnsDomain property is only used with internal listeners. It defines whether the fully-qualified DNS names that include the cluster service suffix (usually .cluster.local) are used. With useServiceDnsDomain set as false, the advertised addresses are generated without the service suffix; for example, my-cluster-kafka-0.my-cluster-kafka-brokers.myproject.svc. With useServiceDnsDomain set as true, the advertised addresses are generated with the service suffix; for example, my-cluster-kafka-0.my-cluster-kafka-brokers.myproject.svc.cluster.local. Default is false.

Example of an internal listener configured to use the Service DNS domain

listeners:
  #...
  - name: plain
    port: 9092
    type: internal
    tls: false
    configuration:
      useServiceDnsDomain: true
      # ...
# ...

If your OpenShift cluster uses a different service suffix than .cluster.local, you can configure the suffix using the KUBERNETES_SERVICE_DNS_DOMAIN environment variable in the Cluster Operator configuration. See Section 5.1.1, “Cluster Operator configuration” for more details.

13.2.10.7. `GenericKafkaListenerConfiguration` schema properties

Property	Description
brokerCertChainAndKey	Reference to the `Secret` which holds the certificate and private key pair which will be used for this listener. The certificate can optionally contain the whole chain. This field can be used only with listeners with enabled TLS encryption.
`CertAndKeySecretSource`
externalTrafficPolicy	Specifies whether the service routes external traffic to node-local or cluster-wide endpoints. `Cluster` may cause a second hop to another node and obscures the client source IP. `Local` avoids a second hop for LoadBalancer and Nodeport type services and preserves the client source IP (when supported by the infrastructure). If unspecified, OpenShift will use `Cluster` as the default.This field can be used only with `loadbalancer` or `nodeport` type listener.
string (one of [Local, Cluster])
loadBalancerSourceRanges	A list of CIDR ranges (for example `10.0.0.0/8` or `130.211.204.1/32`) from which clients can connect to load balancer type listeners. If supported by the platform, traffic through the loadbalancer is restricted to the specified CIDR ranges. This field is applicable only for loadbalancer type services and is ignored if the cloud provider does not support the feature. For more information, see https://v1-17.docs.kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/. This field can be used only with `loadbalancer` type listener.
string array
bootstrap	Bootstrap configuration.
`GenericKafkaListenerConfigurationBootstrap`	Bootstrap configuration.
brokers	Per-broker configurations.
`GenericKafkaListenerConfigurationBroker` array	Per-broker configurations.
ipFamilyPolicy	Specifies the IP Family Policy used by the service. Available options are `SingleStack`, `PreferDualStack` and `RequireDualStack`. `SingleStack` is for a single IP family. `PreferDualStack` is for two IP families on dual-stack configured clusters or a single IP family on single-stack clusters. `RequireDualStack` fails unless there are two IP families on dual-stack configured clusters. If unspecified, OpenShift will choose the default value based on the service type. Available on OpenShift 1.20 and newer.
string (one of [RequireDualStack, SingleStack, PreferDualStack])
ipFamilies	Specifies the IP Families used by the service. Available options are `IPv4` and IPv6. If unspecified, OpenShift will choose the default value based on the `ipFamilyPolicy setting. Available on OpenShift 1.20 and newer.
string (one or more of [IPv6, IPv4]) array
class	Configures the `Ingress` class that defines which `Ingress` controller will be used. This field can be used only with `ingress` type listener. If not specified, the default Ingress controller will be used.
string
finalizers	A list of finalizers which will be configured for the `LoadBalancer` type Services created for this listener. If supported by the platform, the finalizer `service.kubernetes.io/load-balancer-cleanup` to make sure that the external load balancer is deleted together with the service.For more information, see https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#garbage-collecting-load-balancers. This field can be used only with `loadbalancer` type listeners.
string array
maxConnectionCreationRate	The maximum connection creation rate we allow in this listener at any time. New connections will be throttled if the limit is reached.Supported only on Kafka 2.7.0 and newer.
integer
maxConnections	The maximum number of connections we allow for this listener in the broker at any time. New connections are blocked if the limit is reached.
integer
preferredNodePortAddressType	Defines which address type should be used as the node address. Available types are: `ExternalDNS`, `ExternalIP`, `InternalDNS`, `InternalIP` and `Hostname`. By default, the addresses will be used in the following order (the first one found will be used): * `ExternalDNS` * `ExternalIP` * `InternalDNS` * `InternalIP` * `Hostname` This field is used to select the preferred address type, which is checked first. If no address is found for this address type, the other types are checked in the default order. This field can only be used with `nodeport` type listener.
string (one of [ExternalDNS, ExternalIP, Hostname, InternalIP, InternalDNS])
useServiceDnsDomain	Configures whether the OpenShift service DNS domain should be used or not. If set to `true`, the generated addresses will contain the service DNS domain suffix (by default `.cluster.local`, can be configured using environment variable `KUBERNETES_SERVICE_DNS_DOMAIN`). Defaults to `false`.This field can be used only with `internal` type listener.
boolean

13.2.11. `CertAndKeySecretSource` schema reference

Used in: GenericKafkaListenerConfiguration, KafkaClientAuthenticationTls

Property	Description
certificate	The name of the file certificate in the Secret.
string	The name of the file certificate in the Secret.
key	The name of the private key in the Secret.
string	The name of the private key in the Secret.
secretName	The name of the Secret containing the certificate.
string	The name of the Secret containing the certificate.

13.2.12. `GenericKafkaListenerConfigurationBootstrap` schema reference

Used in: GenericKafkaListenerConfiguration

Full list of GenericKafkaListenerConfigurationBootstrap schema properties

Broker service equivalents of nodePort, host, loadBalancerIP and annotations properties are configured in the GenericKafkaListenerConfigurationBroker schema.

13.2.12.1. `alternativeNames`

You can specify alternative names for the bootstrap service. The names are added to the broker certificates and can be used for TLS hostname verification. The alternativeNames property is applicable to all types of listeners.

Example of an external route listener configured with an additional bootstrap address

listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        alternativeNames:
          - example.hostname1
          - example.hostname2
# ...

13.2.12.2. `host`

The host property is used with route and ingress listeners to specify the hostnames used by the bootstrap and per-broker services.

A host property value is mandatory for ingress listener configuration, as the Ingress controller does not assign any hostnames automatically. Make sure that the hostnames resolve to the Ingress endpoints. AMQ Streams will not perform any validation that the requested hosts are available and properly routed to the Ingress endpoints.

Example of host configuration for an ingress listener

listeners:
  #...
  - name: external
    port: 9094
    type: ingress
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        host: bootstrap.myingress.com
      brokers:
      - broker: 0
        host: broker-0.myingress.com
      - broker: 1
        host: broker-1.myingress.com
      - broker: 2
        host: broker-2.myingress.com
# ...

By default, route listener hosts are automatically assigned by OpenShift. However, you can override the assigned route hosts by specifying hosts.

AMQ Streams does not perform any validation that the requested hosts are available. You must ensure that they are free and can be used.

Example of host configuration for a route listener

# ...
listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        host: bootstrap.myrouter.com
      brokers:
      - broker: 0
        host: broker-0.myrouter.com
      - broker: 1
        host: broker-1.myrouter.com
      - broker: 2
        host: broker-2.myrouter.com
# ...

13.2.12.3. `nodePort`

By default, the port numbers used for the bootstrap and broker services are automatically assigned by OpenShift. You can override the assigned node ports for nodeport listeners by specifying the requested port numbers.

AMQ Streams does not perform any validation on the requested ports. You must ensure that they are free and available for use.

Example of an external listener configured with overrides for node ports

# ...
listeners:
  #...
  - name: external
    port: 9094
    type: nodeport
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        nodePort: 32100
      brokers:
      - broker: 0
        nodePort: 32000
      - broker: 1
        nodePort: 32001
      - broker: 2
        nodePort: 32002
# ...

13.2.12.4. `loadBalancerIP`

Use the loadBalancerIP property to request a specific IP address when creating a loadbalancer. Use this property when you need to use a loadbalancer with a specific IP address. The loadBalancerIP field is ignored if the cloud provider does not support the feature.

Example of an external listener of type loadbalancer with specific loadbalancer IP address requests

# ...
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        loadBalancerIP: 172.29.3.10
      brokers:
      - broker: 0
        loadBalancerIP: 172.29.3.1
      - broker: 1
        loadBalancerIP: 172.29.3.2
      - broker: 2
        loadBalancerIP: 172.29.3.3
# ...

13.2.12.5. `annotations`

Use the annotations property to add annotations to OpenShift resources related to the listeners. You can use these annotations, for example, to instrument DNS tooling such as External DNS, which automatically assigns DNS names to the loadbalancer services.

Example of an external listener of type loadbalancer using annotations

# ...
listeners:
  #...
  - name: external
    port: 9094
    type: loadbalancer
    tls: true
    authentication:
      type: tls
    configuration:
      bootstrap:
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-bootstrap.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      brokers:
      - broker: 0
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-0.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      - broker: 1
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-1.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
      - broker: 2
        annotations:
          external-dns.alpha.kubernetes.io/hostname: kafka-broker-2.mydomain.com.
          external-dns.alpha.kubernetes.io/ttl: "60"
# ...

13.2.12.6. `GenericKafkaListenerConfigurationBootstrap` schema properties

Property	Description
alternativeNames	Additional alternative names for the bootstrap service. The alternative names will be added to the list of subject alternative names of the TLS certificates.
string array
host	The bootstrap host. This field will be used in the Ingress resource or in the Route resource to specify the desired hostname. This field can be used only with `route` (optional) or `ingress` (required) type listeners.
string
nodePort	Node port for the bootstrap service. This field can be used only with `nodeport` type listener.
integer
loadBalancerIP	The loadbalancer is requested with the IP address specified in this field. This feature depends on whether the underlying cloud provider supports specifying the `loadBalancerIP` when a load balancer is created. This field is ignored if the cloud provider does not support the feature.This field can be used only with `loadbalancer` type listener.
string
annotations	Annotations that will be added to the `Ingress`, `Route`, or `Service` resource. You can use this field to configure DNS providers such as External DNS. This field can be used only with `loadbalancer`, `nodeport`, `route`, or `ingress` type listeners.
map
labels	Labels that will be added to the `Ingress`, `Route`, or `Service` resource. This field can be used only with `loadbalancer`, `nodeport`, `route`, or `ingress` type listeners.
map

13.2.13. `GenericKafkaListenerConfigurationBroker` schema reference

Used in: GenericKafkaListenerConfiguration

Full list of GenericKafkaListenerConfigurationBroker schema properties

You can see example configuration for the nodePort, host, loadBalancerIP and annotations properties in the GenericKafkaListenerConfigurationBootstrap schema, which configures bootstrap service overrides.

Advertised addresses for brokers

By default, AMQ Streams tries to automatically determine the hostnames and ports that your Kafka cluster advertises to its clients. This is not sufficient in all situations, because the infrastructure on which AMQ Streams is running might not provide the right hostname or port through which Kafka can be accessed.

You can specify a broker ID and customize the advertised hostname and port in the configuration property of the listener. AMQ Streams will then automatically configure the advertised address in the Kafka brokers and add it to the broker certificates so it can be used for TLS hostname verification. Overriding the advertised host and ports is available for all types of listeners.

Example of an external route listener configured with overrides for advertised addresses

listeners:
  #...
  - name: external
    port: 9094
    type: route
    tls: true
    authentication:
      type: tls
    configuration:
      brokers:
      - broker: 0
        advertisedHost: example.hostname.0
        advertisedPort: 12340
      - broker: 1
        advertisedHost: example.hostname.1
        advertisedPort: 12341
      - broker: 2
        advertisedHost: example.hostname.2
        advertisedPort: 12342
# ...

13.2.13.1. `GenericKafkaListenerConfigurationBroker` schema properties

Property	Description
broker	ID of the kafka broker (broker identifier). Broker IDs start from 0 and correspond to the number of broker replicas.
integer
advertisedHost	The host name which will be used in the brokers' `advertised.brokers`.
string
advertisedPort	The port number which will be used in the brokers' `advertised.brokers`.
integer
host	The broker host. This field will be used in the Ingress resource or in the Route resource to specify the desired hostname. This field can be used only with `route` (optional) or `ingress` (required) type listeners.
string
nodePort	Node port for the per-broker service. This field can be used only with `nodeport` type listener.
integer
loadBalancerIP	The loadbalancer is requested with the IP address specified in this field. This feature depends on whether the underlying cloud provider supports specifying the `loadBalancerIP` when a load balancer is created. This field is ignored if the cloud provider does not support the feature.This field can be used only with `loadbalancer` type listener.
string
annotations	Annotations that will be added to the `Ingress` or `Service` resource. You can use this field to configure DNS providers such as External DNS. This field can be used only with `loadbalancer`, `nodeport`, or `ingress` type listeners.
map
labels	Labels that will be added to the `Ingress`, `Route`, or `Service` resource. This field can be used only with `loadbalancer`, `nodeport`, `route`, or `ingress` type listeners.
map

13.2.14. `EphemeralStorage` schema reference

Used in: JbodStorage, KafkaClusterSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the EphemeralStorage type from PersistentClaimStorage. It must have the value ephemeral for the type EphemeralStorage.

Property	Description
id	Storage identification number. It is mandatory only for storage volumes defined in a storage of type 'jbod'.
integer
sizeLimit	When type=ephemeral, defines the total amount of local storage required for this EmptyDir volume (for example 1Gi).
string
type	Must be `ephemeral`.
string	Must be `ephemeral`.

13.2.15. `PersistentClaimStorage` schema reference

Used in: JbodStorage, KafkaClusterSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the PersistentClaimStorage type from EphemeralStorage. It must have the value persistent-claim for the type PersistentClaimStorage.

Property	Description
type	Must be `persistent-claim`.
string	Must be `persistent-claim`.
size	When type=persistent-claim, defines the size of the persistent volume claim (i.e 1Gi). Mandatory when type=persistent-claim.
string
selector	Specifies a specific persistent volume to use. It contains key:value pairs representing labels for selecting such a volume.
map
deleteClaim	Specifies if the persistent volume claim has to be deleted when the cluster is un-deployed.
boolean
class	The storage class to use for dynamic volume allocation.
string	The storage class to use for dynamic volume allocation.
id	Storage identification number. It is mandatory only for storage volumes defined in a storage of type 'jbod'.
integer
overrides	Overrides for individual brokers. The `overrides` field allows to specify a different configuration for different brokers.
`PersistentClaimStorageOverride` array

13.2.16. `PersistentClaimStorageOverride` schema reference

Used in: PersistentClaimStorage

Property	Description
class	The storage class to use for dynamic volume allocation for this broker.
string
broker	Id of the kafka broker (broker identifier).
integer	Id of the kafka broker (broker identifier).

13.2.17. `JbodStorage` schema reference

Used in: KafkaClusterSpec

The type property is a discriminator that distinguishes use of the JbodStorage type from EphemeralStorage, PersistentClaimStorage. It must have the value jbod for the type JbodStorage.

Property	Description
type	Must be `jbod`.
string	Must be `jbod`.
volumes	List of volumes as Storage objects representing the JBOD disks array.
`EphemeralStorage`, `PersistentClaimStorage` array

13.2.18. `KafkaAuthorizationSimple` schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationSimple schema properties

Simple authorization in AMQ Streams uses the AclAuthorizer plugin, the default Access Control Lists (ACLs) authorization plugin provided with Apache Kafka. ACLs allow you to define which users have access to which resources at a granular level.

Configure the Kafka custom resource to use simple authorization. Set the type property in the authorization section to the value simple, and configure a list of super users.

Access rules are configured for the KafkaUser, as described in the ACLRule schema reference.

13.2.18.1. `superUsers`

A list of user principals treated as super users, so that they are always allowed without querying ACL rules. For more information see Kafka authorization.

An example of simple authorization configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: simple
      superUsers:
        - CN=client_1
        - user_2
        - CN=client_3
    # ...

Note

The super.user configuration option in the config property in Kafka.spec.kafka is ignored. Designate super users in the authorization property instead. For more information, see Kafka broker configuration.

13.2.18.2. `KafkaAuthorizationSimple` schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationSimple type from KafkaAuthorizationOpa, KafkaAuthorizationKeycloak, KafkaAuthorizationCustom. It must have the value simple for the type KafkaAuthorizationSimple.

Property	Description
type	Must be `simple`.
string	Must be `simple`.
superUsers	List of super users. Should contain list of user principals which should get unlimited access rights.
string array

13.2.19. `KafkaAuthorizationOpa` schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationOpa schema properties

To use Open Policy Agent authorization, set the type property in the authorization section to the value opa, and configure OPA properties as required.

13.2.19.1. `url`

The URL used to connect to the Open Policy Agent server. The URL has to include the policy which will be queried by the authorizer. Required.

13.2.19.2. `allowOnError`

Defines whether a Kafka client should be allowed or denied by default when the authorizer fails to query the Open Policy Agent, for example, when it is temporarily unavailable. Defaults to false - all actions will be denied.

13.2.19.3. `initialCacheCapacity`

Initial capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to 5000.

13.2.19.4. `maximumCacheSize`

Maximum capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to 50000.

13.2.19.5. `expireAfterMs`

The expiration of the records kept in the local cache to avoid querying the Open Policy Agent for every request. Defines how often the cached authorization decisions are reloaded from the Open Policy Agent server. In milliseconds. Defaults to 3600000 milliseconds (1 hour).

13.2.19.6. `superUsers`

A list of user principals treated as super users, so that they are always allowed without querying the open Policy Agent policy. For more information see Kafka authorization.

An example of Open Policy Agent authorizer configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: opa
      url: http://opa:8181/v1/data/kafka/allow
      allowOnError: false
      initialCacheCapacity: 1000
      maximumCacheSize: 10000
      expireAfterMs: 60000
      superUsers:
        - CN=fred
        - sam
        - CN=edward
    # ...

13.2.19.7. `KafkaAuthorizationOpa` schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationOpa type from KafkaAuthorizationSimple, KafkaAuthorizationKeycloak, KafkaAuthorizationCustom. It must have the value opa for the type KafkaAuthorizationOpa.

Property	Description
type	Must be `opa`.
string	Must be `opa`.
url	The URL used to connect to the Open Policy Agent server. The URL has to include the policy which will be queried by the authorizer. This option is required.
string
allowOnError	Defines whether a Kafka client should be allowed or denied by default when the authorizer fails to query the Open Policy Agent, for example, when it is temporarily unavailable). Defaults to `false` - all actions will be denied.
boolean
initialCacheCapacity	Initial capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request Defaults to `5000`.
integer
maximumCacheSize	Maximum capacity of the local cache used by the authorizer to avoid querying the Open Policy Agent for every request. Defaults to `50000`.
integer
expireAfterMs	The expiration of the records kept in the local cache to avoid querying the Open Policy Agent for every request. Defines how often the cached authorization decisions are reloaded from the Open Policy Agent server. In milliseconds. Defaults to `3600000`.
integer
superUsers	List of super users, which is specifically a list of user principals that have unlimited access rights.
string array

13.2.20. `KafkaAuthorizationKeycloak` schema reference

Used in: KafkaClusterSpec

The type property is a discriminator that distinguishes use of the KafkaAuthorizationKeycloak type from KafkaAuthorizationSimple, KafkaAuthorizationOpa, KafkaAuthorizationCustom. It must have the value keycloak for the type KafkaAuthorizationKeycloak.

Property	Description
type	Must be `keycloak`.
string	Must be `keycloak`.
clientId	OAuth Client ID which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.
string
tokenEndpointUri	Authorization server token endpoint URI.
string	Authorization server token endpoint URI.
tlsTrustedCertificates	Trusted certificates for TLS connection to the OAuth server.
`CertSecretSource` array
disableTlsHostnameVerification	Enable or disable TLS hostname verification. Default value is `false`.
boolean
delegateToKafkaAcls	Whether authorization decision should be delegated to the 'Simple' authorizer if DENIED by Red Hat Single Sign-On Authorization Services policies. Default value is `false`.
boolean
grantsRefreshPeriodSeconds	The time between two consecutive grants refresh runs in seconds. The default value is 60.
integer
grantsRefreshPoolSize	The number of threads to use to refresh grants for active sessions. The more threads, the more parallelism, so the sooner the job completes. However, using more threads places a heavier load on the authorization server. The default value is 5.
integer
superUsers	List of super users. Should contain list of user principals which should get unlimited access rights.
string array

13.2.21. `KafkaAuthorizationCustom` schema reference

Used in: KafkaClusterSpec

Full list of KafkaAuthorizationCustom schema properties

To use custom authorization in AMQ Streams, you can configure your own Authorizer plugin to define Access Control Lists (ACLs).

ACLs allow you to define which users have access to which resources at a granular level.

Configure the Kafka custom resource to use custom authorization. Set the type property in the authorization section to the value custom, and the set following properties.

Important

The custom authorizer must implement the org.apache.kafka.server.authorizer.Authorizer interface, and support configuration of super.users using the super.users configuration property.

13.2.21.1. `authorizerClass`

(Required) Java class that implements the org.apache.kafka.server.authorizer.Authorizer interface to support custom ACLs.

13.2.21.2. `superUsers`

A list of user principals treated as super users, so that they are always allowed without querying ACL rules. For more information see Kafka authorization.

You can add configuration for initializing the custom authorizer using Kafka.spec.kafka.config.

An example of custom authorization configuration under Kafka.spec

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
  namespace: myproject
spec:
  kafka:
    # ...
    authorization:
      type: custom
      authorizerClass: io.mycompany.CustomAuthorizer
      superUsers:
        - CN=client_1
        - user_2
        - CN=client_3
    # ...
    config:
      authorization.custom.property1=value1
      authorization.custom.property2=value2
    # ...

In addition to the Kafka custom resource configuration, the JAR file containing the custom authorizer class along with its dependencies must be available on the classpath of the Kafka broker.

The AMQ Streams Maven build process provides a mechanism to add custom third-party libraries to the generated Kafka broker container image by adding them as dependencies in the pom.xml file under the docker-images/kafka/kafka-thirdparty-libs directory. The directory contains different folders for different Kafka versions. Choose the appropriate folder. Before modifying the pom.xml file, the third-party library must be available in a Maven repository, and that Maven repository must be accessible to the AMQ Streams build process.

Note

13.2.21.3. `KafkaAuthorizationCustom` schema properties

The type property is a discriminator that distinguishes use of the KafkaAuthorizationCustom type from KafkaAuthorizationSimple, KafkaAuthorizationOpa, KafkaAuthorizationKeycloak. It must have the value custom for the type KafkaAuthorizationCustom.

Property	Description
type	Must be `custom`.
string	Must be `custom`.
authorizerClass	Authorization implementation class, which must be available in classpath.
string
superUsers	List of super users, which are user principals with unlimited access rights.
string array

13.2.22. `Rack` schema reference

Used in: KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec

Full list of Rack schema properties

The rack option configures rack awareness. A rack can represent an availability zone, data center, or an actual rack in your data center. The rack is configured through a topologyKey. topologyKey identifies a label on OpenShift nodes that contains the name of the topology in its value. An example of such a label is topology.kubernetes.io/zone (or failure-domain.beta.kubernetes.io/zone on older OpenShift versions), which contains the name of the availability zone in which the OpenShift node runs. You can configure your Kafka cluster to be aware of the rack in which it runs, and enable additional features such as spreading partition replicas across different racks or consuming messages from the closest replicas.

For more information about OpenShift node labels, see Well-Known Labels, Annotations and Taints. Consult your OpenShift administrator regarding the node label that represents the zone or rack into which the node is deployed.

13.2.22.1. Spreading partition replicas across racks

When rack awareness is configured, AMQ Streams will set broker.rack configuration for each Kafka broker. The broker.rack configuration assigns a rack ID to each broker. When broker.rack is configured, Kafka brokers will spread partition replicas across as many different racks as possible. When replicas are spread across multiple racks, the probability that multiple replicas will fail at the same time is lower than if they would be in the same rack. Spreading replicas improves resiliency, and is important for availability and reliability. To enable rack awareness in Kafka, add the rack option to the .spec.kafka section of the Kafka custom resource as shown in the example below.

Example rack configuration for Kafka

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    # ...

Note

The rack in which brokers are running can change in some cases when the pods are deleted or restarted. As a result, the replicas running in different racks might then share the same rack. Use Cruise Control and the KafkaRebalance resource with the RackAwareGoal to make sure that replicas remain distributed across different racks.

When rack awareness is enabled in the Kafka custom resource, AMQ Streams will automatically add the OpenShift preferredDuringSchedulingIgnoredDuringExecution affinity rule to distribute the Kafka brokers across the different racks. However, the preferred rule does not guarantee that the brokers will be spread. Depending on your exact OpenShift and Kafka configurations, you should add additional affinity rules or configure topologySpreadConstraints for both ZooKeeper and Kafka to make sure the nodes are properly distributed accross as many racks as possible. For more information see Section 2.7, “Configuring pod scheduling”.

13.2.22.2. Consuming messages from the closest replicas

Rack awareness can also be used in consumers to fetch data from the closest replica. This is useful for reducing the load on your network when a Kafka cluster spans multiple datacenters and can also reduce costs when running Kafka in public clouds. However, it can lead to increased latency.

In order to be able to consume from the closest replica, rack awareness has to be configured in the Kafka cluster, and the RackAwareReplicaSelector has to be enabled. The replica selector plugin provides the logic that enables clients to consume from the nearest replica. The default implementation uses LeaderSelector to always select the leader replica for the client. Specify RackAwareReplicaSelector for the replica.selector.class to switch from the default implementation.

Example rack configuration with enabled replica-aware selector

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    config:
      # ...
      replica.selector.class: org.apache.kafka.common.replica.RackAwareReplicaSelector
    # ...

In addition to the Kafka broker configuration, you also need to specify the client.rack option in your consumers. The client.rack option should specify the rack ID in which the consumer is running. RackAwareReplicaSelector associates matching broker.rack and client.rack IDs, to find the nearest replica and consume from it. If there are multiple replicas in the same rack, RackAwareReplicaSelector always selects the most up-to-date replica. If the rack ID is not specified, or if it cannot find a replica with the same rack ID, it will fall back to the leader replica.

Figure 13.1. Example showing client consuming from replicas in the same availability zone

Consuming messages from the closest replicas can be used also in Kafka Connect for sink connectors which are consuming messages. When deploying Kafka Connect using AMQ Streams, you can use the rack section in the KafkaConnect or KafkaConnectS2I custom resources to automatically configure the client.rack option.

Example rack configuration for Kafka Connect

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
# ...
spec:
  kafka:
    # ...
    rack:
      topologyKey: topology.kubernetes.io/zone
    # ...

Enabling rack awareness in the KafkaConnect or KafkaConnectS2I custom resource will not set any affinity rules, but you can also configure affinity or topologySpreadConstraints. For more information see Section 2.7, “Configuring pod scheduling”.

13.2.22.3. `Rack` schema properties

Property	Description
topologyKey	A key that matches labels assigned to the OpenShift cluster nodes. The value of the label is used to set the broker’s `broker.rack` config and `client.rack` in Kafka Connect.
string

13.2.23. `Probe` schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaExporterSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, TlsSidecar, ZookeeperClusterSpec

Property	Description
failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
integer
initialDelaySeconds	The initial delay before first the health is first checked. Default to 15 seconds. Minimum value is 0.
integer
periodSeconds	How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
integer
successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness. Minimum value is 1.
integer
timeoutSeconds	The timeout for each attempted health check. Default to 5 seconds. Minimum value is 1.
integer

13.2.24. `JvmOptions` schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

Property	Description
-XX	A map of -XX options to the JVM.
map	A map of -XX options to the JVM.
-Xms	-Xms option to to the JVM.
string	-Xms option to to the JVM.
-Xmx	-Xmx option to to the JVM.
string	-Xmx option to to the JVM.
gcLoggingEnabled	Specifies whether the Garbage Collection logging is enabled. The default is false.
boolean
javaSystemProperties	A map of additional system properties which will be passed using the `-D` option to the JVM.
`SystemProperty` array

13.2.25. `SystemProperty` schema reference

Used in: JvmOptions

Property	Description
name	The system property name.
string	The system property name.
value	The system property value.
string	The system property value.

13.2.26. `KafkaJmxOptions` schema reference

Used in: KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec

Full list of KafkaJmxOptions schema properties

Configures JMX connection options.

JMX metrics are obtained from Kafka brokers, Kafka Connect, and MirrorMaker 2.0 by opening a JMX port on 9999. Use the jmxOptions property to configure a password-protected or an unprotected JMX port. Using password protection prevents unauthorized pods from accessing the port.

You can then obtain metrics about the component.

For example, for each Kafka broker you can obtain bytes-per-second usage data from clients, or the request rate of the network of the broker.

To enable security for the JMX port, set the type parameter in the authentication field to password.

Example password-protected JMX configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    jmxOptions:
      authentication:
        type: "password"
    # ...
  zookeeper:
    # ...

You can then deploy a pod into a cluster and obtain JMX metrics using the headless service by specifying which broker you want to address.

For example, to get JMX metrics from broker 0 you specify:

"CLUSTER-NAME-kafka-0.CLUSTER-NAME-kafka-brokers"

CLUSTER-NAME-kafka-0 is name of the broker pod, and CLUSTER-NAME-kafka-brokers is the name of the headless service to return the IPs of the broker pods.

If the JMX port is secured, you can get the username and password by referencing them from the JMX Secret in the deployment of your pod.

For an unprotected JMX port, use an empty object {} to open the JMX port on the headless service. You deploy a pod and obtain metrics in the same way as for the protected port, but in this case any pod can read from the JMX port.

Example open port JMX configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
    jmxOptions: {}
    # ...
  zookeeper:
    # ...

Additional resources

For more information on the Kafka component metrics exposed using JMX, see the Apache Kafka documentation.

13.2.26.1. `KafkaJmxOptions` schema properties

Property	Description
authentication	Authentication configuration for connecting to the JMX port. The type depends on the value of the `authentication.type` property within the given object, which must be one of [password].
`KafkaJmxAuthenticationPassword`

13.2.27. `KafkaJmxAuthenticationPassword` schema reference

Used in: KafkaJmxOptions

The type property is a discriminator that distinguishes use of the KafkaJmxAuthenticationPassword type from other subtypes which may be added in the future. It must have the value password for the type KafkaJmxAuthenticationPassword.

Property	Description
type	Must be `password`.
string	Must be `password`.

13.2.28. `JmxPrometheusExporterMetrics` schema reference

Used in: CruiseControlSpec, KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the JmxPrometheusExporterMetrics type from other subtypes which may be added in the future. It must have the value jmxPrometheusExporter for the type JmxPrometheusExporterMetrics.

Property	Description
type	Must be `jmxPrometheusExporter`.
string	Must be `jmxPrometheusExporter`.
valueFrom	ConfigMap entry where the Prometheus JMX Exporter configuration is stored. For details of the structure of this configuration, see the JMX Exporter documentation.
`ExternalConfigurationReference`

13.2.29. `ExternalConfigurationReference` schema reference

Used in: ExternalLogging, JmxPrometheusExporterMetrics

Property	Description
configMapKeyRef	Reference to the key in the ConfigMap containing the configuration. For more information, see the external documentation for core/v1 configmapkeyselector.
ConfigMapKeySelector

13.2.30. `InlineLogging` schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the InlineLogging type from ExternalLogging. It must have the value inline for the type InlineLogging.

Property	Description
type	Must be `inline`.
string	Must be `inline`.
loggers	A Map from logger name to logger level.
map	A Map from logger name to logger level.

13.2.31. `ExternalLogging` schema reference

Used in: CruiseControlSpec, EntityTopicOperatorSpec, EntityUserOperatorSpec, KafkaBridgeSpec, KafkaClusterSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec, ZookeeperClusterSpec

The type property is a discriminator that distinguishes use of the ExternalLogging type from InlineLogging. It must have the value external for the type ExternalLogging.

Property	Description
type	Must be `external`.
string	Must be `external`.
valueFrom	`ConfigMap` entry where the logging configuration is stored.
`ExternalConfigurationReference`

13.2.32. `KafkaClusterTemplate` schema reference

Used in: KafkaClusterSpec

Property	Description
statefulset	Template for Kafka `StatefulSet`.
`StatefulSetTemplate`	Template for Kafka `StatefulSet`.
pod	Template for Kafka `Pods`.
`PodTemplate`	Template for Kafka `Pods`.
bootstrapService	Template for Kafka bootstrap `Service`.
`InternalServiceTemplate`	Template for Kafka bootstrap `Service`.
brokersService	Template for Kafka broker `Service`.
`InternalServiceTemplate`	Template for Kafka broker `Service`.
externalBootstrapService	Template for Kafka external bootstrap `Service`.
`ExternalServiceTemplate`	Template for Kafka external bootstrap `Service`.
perPodService	Template for Kafka per-pod `Services` used for access from outside of OpenShift.
`ExternalServiceTemplate`
externalBootstrapRoute	Template for Kafka external bootstrap `Route`.
`ResourceTemplate`	Template for Kafka external bootstrap `Route`.
perPodRoute	Template for Kafka per-pod `Routes` used for access from outside of OpenShift.
`ResourceTemplate`
externalBootstrapIngress	Template for Kafka external bootstrap `Ingress`.
`ResourceTemplate`	Template for Kafka external bootstrap `Ingress`.
perPodIngress	Template for Kafka per-pod `Ingress` used for access from outside of OpenShift.
`ResourceTemplate`
persistentVolumeClaim	Template for all Kafka `PersistentVolumeClaims`.
`ResourceTemplate`	Template for all Kafka `PersistentVolumeClaims`.
podDisruptionBudget	Template for Kafka `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for Kafka `PodDisruptionBudget`.
kafkaContainer	Template for the Kafka broker container.
`ContainerTemplate`	Template for the Kafka broker container.
initContainer	Template for the Kafka init container.
`ContainerTemplate`	Template for the Kafka init container.
clusterCaCert	Template for Secret with Kafka Cluster certificate public key.
`ResourceTemplate`
serviceAccount	Template for the Kafka service account.
`ResourceTemplate`	Template for the Kafka service account.
clusterRoleBinding	Template for the Kafka ClusterRoleBinding.
`ResourceTemplate`	Template for the Kafka ClusterRoleBinding.

13.2.33. `StatefulSetTemplate` schema reference

Used in: KafkaClusterTemplate, ZookeeperClusterTemplate

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.
podManagementPolicy	PodManagementPolicy which will be used for this StatefulSet. Valid values are `Parallel` and `OrderedReady`. Defaults to `Parallel`.
string (one of [OrderedReady, Parallel])

13.2.34. `MetadataTemplate` schema reference

Used in: DeploymentTemplate, ExternalServiceTemplate, InternalServiceTemplate, PodDisruptionBudgetTemplate, PodTemplate, ResourceTemplate, StatefulSetTemplate

Full list of MetadataTemplate schema properties

Labels and Annotations are used to identify and organize resources, and are configured in the metadata property.

For example:

# ...
template:
  statefulset:
    metadata:
      labels:
        label1: value1
        label2: value2
      annotations:
        annotation1: value1
        annotation2: value2
# ...

The labels and annotations fields can contain any labels or annotations that do not contain the reserved string strimzi.io. Labels and annotations containing strimzi.io are used internally by AMQ Streams and cannot be configured.

13.2.34.1. `MetadataTemplate` schema properties

Property	Description
labels	Labels added to the resource template. Can be applied to different resources such as `StatefulSets`, `Deployments`, `Pods`, and `Services`.
map
annotations	Annotations added to the resource template. Can be applied to different resources such as `StatefulSets`, `Deployments`, `Pods`, and `Services`.
map

13.2.35. `PodTemplate` schema reference

Used in: CruiseControlTemplate, EntityOperatorTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaExporterTemplate, KafkaMirrorMakerTemplate, ZookeeperClusterTemplate

Full list of PodTemplate schema properties

Configures the template for Kafka pods.

Example PodTemplate configuration

# ...
template:
  pod:
    metadata:
      labels:
        label1: value1
      annotations:
        anno1: value1
    imagePullSecrets:
      - name: my-docker-credentials
    securityContext:
      runAsUser: 1000001
      fsGroup: 0
    terminationGracePeriodSeconds: 120
# ...

13.2.35.1. `hostAliases`

Use the hostAliases property to a specify a list of hosts and IP addresses, which are injected into the /etc/hosts file of the pod.

This configuration is especially useful for Kafka Connect or MirrorMaker when a connection outside of the cluster is also requested by users.

Example hostAliases configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
#...
spec:
  # ...
  template:
    pod:
      hostAliases:
      - ip: "192.168.1.86"
        hostnames:
        - "my-host-1"
        - "my-host-2"
      #...

13.2.35.2. `PodTemplate` schema properties

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.
imagePullSecrets	List of references to secrets in the same namespace to use for pulling any of the images used by this Pod. When the `STRIMZI_IMAGE_PULL_SECRETS` environment variable in Cluster Operator and the `imagePullSecrets` option are specified, only the `imagePullSecrets` variable is used and the `STRIMZI_IMAGE_PULL_SECRETS` variable is ignored. For more information, see the external documentation for core/v1 localobjectreference.
LocalObjectReference array
securityContext	Configures pod-level security attributes and common container settings. For more information, see the external documentation for core/v1 podsecuritycontext.
PodSecurityContext
terminationGracePeriodSeconds	The grace period is the duration in seconds after the processes running in the pod are sent a termination signal, and the time when the processes are forcibly halted with a kill signal. Set this value to longer than the expected cleanup time for your process. Value must be a non-negative integer. A zero value indicates delete immediately. You might need to increase the grace period for very large Kafka clusters, so that the Kafka brokers have enough time to transfer their work to another broker before they are terminated. Defaults to 30 seconds.
integer
affinity	The pod’s affinity rules. For more information, see the external documentation for core/v1 affinity.
Affinity
tolerations	The pod’s tolerations. For more information, see the external documentation for core/v1 toleration.
Toleration array
priorityClassName	The name of the priority class used to assign priority to the pods. For more information about priority classes, see Pod Priority and Preemption.
string
schedulerName	The name of the scheduler used to dispatch this `Pod`. If not specified, the default scheduler will be used.
string
hostAliases	The pod’s HostAliases. HostAliases is an optional list of hosts and IPs that will be injected into the Pod’s hosts file if specified. For more information, see the external documentation for core/v1 HostAlias.
HostAlias array
enableServiceLinks	Indicates whether information about services should be injected into Pod’s environment variables.
boolean
topologySpreadConstraints	The pod’s topology spread constraints. For more information, see the external documentation for core/v1 topologyspreadconstraint.
TopologySpreadConstraint array

13.2.36. `InternalServiceTemplate` schema reference

Used in: CruiseControlTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, ZookeeperClusterTemplate

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.
ipFamilyPolicy	Specifies the IP Family Policy used by the service. Available options are `SingleStack`, `PreferDualStack` and `RequireDualStack`. `SingleStack` is for a single IP family. `PreferDualStack` is for two IP families on dual-stack configured clusters or a single IP family on single-stack clusters. `RequireDualStack` fails unless there are two IP families on dual-stack configured clusters. If unspecified, OpenShift will choose the default value based on the service type. Available on OpenShift 1.20 and newer.
string (one of [RequireDualStack, SingleStack, PreferDualStack])
ipFamilies	Specifies the IP Families used by the service. Available options are `IPv4` and IPv6. If unspecified, OpenShift will choose the default value based on the `ipFamilyPolicy setting. Available on OpenShift 1.20 and newer.
string (one or more of [IPv6, IPv4]) array

13.2.37. `ExternalServiceTemplate` schema reference

Used in: KafkaClusterTemplate

Full list of ExternalServiceTemplate schema properties

When exposing Kafka outside of OpenShift using loadbalancers or node ports, you can use properties, in addition to labels and annotations, to customize how a Service is created.

An example showing customized external services

# ...
template:
  externalBootstrapService:
    externalTrafficPolicy: Local
    loadBalancerSourceRanges:
      - 10.0.0.0/8
      - 88.208.76.87/32
  perPodService:
    externalTrafficPolicy: Local
    loadBalancerSourceRanges:
      - 10.0.0.0/8
      - 88.208.76.87/32
# ...

13.2.37.1. `ExternalServiceTemplate` schema properties

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.

13.2.38. `ResourceTemplate` schema reference

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.

13.2.39. `PodDisruptionBudgetTemplate` schema reference

Used in: CruiseControlTemplate, KafkaBridgeTemplate, KafkaClusterTemplate, KafkaConnectTemplate, KafkaMirrorMakerTemplate, ZookeeperClusterTemplate

Full list of PodDisruptionBudgetTemplate schema properties

AMQ Streams creates a PodDisruptionBudget for every new StatefulSet or Deployment. By default, pod disruption budgets only allow a single pod to be unavailable at a given time. You can increase the amount of unavailable pods allowed by changing the default value of the maxUnavailable property in the PodDisruptionBudget.spec resource.

An example of PodDisruptionBudget template

# ...
template:
    podDisruptionBudget:
        metadata:
            labels:
                key1: label1
                key2: label2
            annotations:
                key1: label1
                key2: label2
        maxUnavailable: 1
# ...

13.2.39.1. `PodDisruptionBudgetTemplate` schema properties

Property	Description
metadata	Metadata to apply to the `PodDistruptionBugetTemplate` resource.
`MetadataTemplate`
maxUnavailable	Maximum number of unavailable pods to allow automatic Pod eviction. A Pod eviction is allowed when the `maxUnavailable` number of pods or fewer are unavailable after the eviction. Setting this value to 0 prevents all voluntary evictions, so the pods must be evicted manually. Defaults to 1.
integer

13.2.40. `ContainerTemplate` schema reference

Full list of ContainerTemplate schema properties

You can set custom security context and environment variables for a container.

The environment variables are defined under the env property as a list of objects with name and value fields. The following example shows two custom environment variables and a custom security context set for the Kafka broker containers:

# ...
template:
  kafkaContainer:
    env:
    - name: EXAMPLE_ENV_1
      value: example.env.one
    - name: EXAMPLE_ENV_2
      value: example.env.two
    securityContext:
      runAsUser: 2000
# ...

Environment variables prefixed with KAFKA_ are internal to AMQ Streams and should be avoided. If you set a custom environment variable that is already in use by AMQ Streams, it is ignored and a warning is recorded in the log.

13.2.40.1. `ContainerTemplate` schema properties

Property	Description
env	Environment variables which should be applied to the container.
`ContainerEnvVar` array
securityContext	Security context for the container. For more information, see the external documentation for core/v1 securitycontext.
SecurityContext

13.2.41. `ContainerEnvVar` schema reference

Used in: ContainerTemplate

Property	Description
name	The environment variable key.
string	The environment variable key.
value	The environment variable value.
string	The environment variable value.

13.2.42. `ZookeeperClusterSpec` schema reference

Used in: KafkaSpec

Full list of ZookeeperClusterSpec schema properties

Configures a ZooKeeper cluster.

13.2.42.1. `config`

Use the config properties to configure ZooKeeper options as keys.

Standard Apache ZooKeeper configuration may be provided, restricted to those properties not managed directly by AMQ Streams.

Configuration options that cannot be configured relate to:

Security (Encryption, Authentication, and Authorization)
Listener configuration
Configuration of data directories
ZooKeeper cluster composition

The values can be one of the following JSON types:

String
Number
Boolean

You can specify and configure the options listed in the ZooKeeper documentation with the exception of those managed directly by AMQ Streams. Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

server.
dataDir
dataLogDir
clientPort
authProvider
quorum.auth
requireClientAuthScheme

When a forbidden option is present in the config property, it is ignored and a warning message is printed to the Cluster Operator log file. All other supported options are passed to ZooKeeper.

There are exceptions to the forbidden options. For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties.

Example ZooKeeper configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  kafka:
    # ...
  zookeeper:
    # ...
    config:
      autopurge.snapRetainCount: 3
      autopurge.purgeInterval: 1
      ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"
      ssl.enabled.protocols: "TLSv1.2"
      ssl.protocol: "TLSv1.2"
    # ...

13.2.42.2. `logging`

ZooKeeper has a configurable logger:

zookeeper.root.logger

ZooKeeper uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  zookeeper:
    # ...
    logging:
      type: inline
      loggers:
        zookeeper.root.logger: "INFO"
    # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
spec:
  # ...
  zookeeper:
    # ...
    logging:
      type: external
      valueFrom:
        configMapKeyRef:
          name: customConfigMap
          key: zookeeper-log4j.properties
  # ...

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.42.3. `ZookeeperClusterSpec` schema properties

Property	Description
replicas	The number of pods in the cluster.
integer	The number of pods in the cluster.
image	The docker image for the pods.
string	The docker image for the pods.
storage	Storage configuration (disk). Cannot be updated. The type depends on the value of the `storage.type` property within the given object, which must be one of [ephemeral, persistent-claim].
`EphemeralStorage`, `PersistentClaimStorage`
config	The ZooKeeper broker config. Properties with the following prefixes cannot be set: server., dataDir, dataLogDir, clientPort, authProvider, quorum.auth, requireClientAuthScheme, snapshot.trust.empty, standaloneEnabled, reconfigEnabled, 4lw.commands.whitelist, secureClientPort, ssl., serverCnxnFactory, sslQuorum (with the exception of: ssl.protocol, ssl.quorum.protocol, ssl.enabledProtocols, ssl.quorum.enabledProtocols, ssl.ciphersuites, ssl.quorum.ciphersuites, ssl.hostnameVerification, ssl.quorum.hostnameVerification).
map
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`
logging	Logging configuration for ZooKeeper. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
template	Template for ZooKeeper cluster resources. The template allows users to specify how are the `StatefulSet`, `Pods` and `Services` generated.
`ZookeeperClusterTemplate`

13.2.43. `ZookeeperClusterTemplate` schema reference

Used in: ZookeeperClusterSpec

Property	Description
statefulset	Template for ZooKeeper `StatefulSet`.
`StatefulSetTemplate`	Template for ZooKeeper `StatefulSet`.
pod	Template for ZooKeeper `Pods`.
`PodTemplate`	Template for ZooKeeper `Pods`.
clientService	Template for ZooKeeper client `Service`.
`InternalServiceTemplate`	Template for ZooKeeper client `Service`.
nodesService	Template for ZooKeeper nodes `Service`.
`InternalServiceTemplate`	Template for ZooKeeper nodes `Service`.
persistentVolumeClaim	Template for all ZooKeeper `PersistentVolumeClaims`.
`ResourceTemplate`	Template for all ZooKeeper `PersistentVolumeClaims`.
podDisruptionBudget	Template for ZooKeeper `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for ZooKeeper `PodDisruptionBudget`.
zookeeperContainer	Template for the ZooKeeper container.
`ContainerTemplate`	Template for the ZooKeeper container.
serviceAccount	Template for the ZooKeeper service account.
`ResourceTemplate`	Template for the ZooKeeper service account.

13.2.44. `EntityOperatorSpec` schema reference

Used in: KafkaSpec

Property	Description
topicOperator	Configuration of the Topic Operator.
`EntityTopicOperatorSpec`	Configuration of the Topic Operator.
userOperator	Configuration of the User Operator.
`EntityUserOperatorSpec`	Configuration of the User Operator.
tlsSidecar	TLS sidecar configuration.
`TlsSidecar`	TLS sidecar configuration.
template	Template for Entity Operator resources. The template allows users to specify how is the `Deployment` and `Pods` generated.
`EntityOperatorTemplate`

13.2.45. `EntityTopicOperatorSpec` schema reference

Used in: EntityOperatorSpec

Full list of EntityTopicOperatorSpec schema properties

Configures the Topic Operator.

13.2.45.1. `logging`

The Topic Operator has a configurable logger:

rootLogger.level

The Topic Operator uses the Apache log4j2 logger implementation.

Use the logging property in the entityOperator.topicOperator field of the Kafka resource Kafka resource to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j2.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    topicOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: inline
        loggers:
          rootLogger.level: INFO
  # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    topicOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: external
        valueFrom:
          configMapKeyRef:
            name: customConfigMap
            key: topic-operator-log4j2.properties
  # ...

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.45.2. `EntityTopicOperatorSpec` schema properties

Property	Description
watchedNamespace	The namespace the Topic Operator should watch.
string	The namespace the Topic Operator should watch.
image	The image to use for the Topic Operator.
string	The image to use for the Topic Operator.
reconciliationIntervalSeconds	Interval between periodic reconciliations.
integer	Interval between periodic reconciliations.
zookeeperSessionTimeoutSeconds	Timeout for the ZooKeeper session.
integer	Timeout for the ZooKeeper session.
startupProbe	Pod startup checking.
`Probe`	Pod startup checking.
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
topicMetadataMaxAttempts	The number of attempts at getting topic metadata.
integer	The number of attempts at getting topic metadata.
logging	Logging configuration. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.

13.2.46. `EntityUserOperatorSpec` schema reference

Used in: EntityOperatorSpec

Full list of EntityUserOperatorSpec schema properties

Configures the User Operator.

13.2.46.1. `logging`

The User Operator has a configurable logger:

rootLogger.level

The User Operator uses the Apache log4j2 logger implementation.

Use the logging property in the entityOperator.userOperator field of the Kafka resource to configure loggers and logger levels.

You can set the log levels by specifying the logger and level directly (inline) or use a custom (external) ConfigMap. If a ConfigMap is used, you set logging.valueFrom.configMapKeyRef.name property to the name of the ConfigMap containing the external logging configuration. Inside the ConfigMap, the logging configuration is described using log4j2.properties. Both logging.valueFrom.configMapKeyRef.name and logging.valueFrom.configMapKeyRef.key properties are mandatory. A ConfigMap using the exact logging configuration specified is created with the custom resource when the Cluster Operator is running, then recreated after each reconciliation. If you do not specify a custom ConfigMap, default logging settings are used. If a specific logger value is not set, upper-level logger settings are inherited for that logger. For more information about log levels, see Apache logging services.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    userOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: inline
        loggers:
          rootLogger.level: INFO
  # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  kafka:
    # ...
  zookeeper:
    # ...
  entityOperator:
    # ...
    userOperator:
      watchedNamespace: my-topic-namespace
      reconciliationIntervalSeconds: 60
      logging:
        type: external
        valueFrom:
          configMapKeyRef:
            name: customConfigMap
            key: user-operator-log4j2.properties
   # ...

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.46.2. `EntityUserOperatorSpec` schema properties

Property	Description
watchedNamespace	The namespace the User Operator should watch.
string	The namespace the User Operator should watch.
image	The image to use for the User Operator.
string	The image to use for the User Operator.
reconciliationIntervalSeconds	Interval between periodic reconciliations.
integer	Interval between periodic reconciliations.
zookeeperSessionTimeoutSeconds	Timeout for the ZooKeeper session.
integer	Timeout for the ZooKeeper session.
secretPrefix	The prefix that will be added to the KafkaUser name to be used as the Secret name.
string
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
logging	Logging configuration. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.

13.2.47. `TlsSidecar` schema reference

Used in: CruiseControlSpec, EntityOperatorSpec

Full list of TlsSidecar schema properties

Configures a TLS sidecar, which is a container that runs in a pod, but serves a supporting purpose. In AMQ Streams, the TLS sidecar uses TLS to encrypt and decrypt communication between components and ZooKeeper.

The TLS sidecar is used in:

Entity Operator
Cruise Control

The TLS sidecar is configured using the tlsSidecar property in:

Kafka.spec.entityOperator
Kafka.spec.cruiseControl

The TLS sidecar supports the following additional options:

image
resources
logLevel
readinessProbe
livenessProbe

The resources property specifies the memory and CPU resources allocated for the TLS sidecar.

The image property configures the container image which will be used.

The readinessProbe and livenessProbe properties configure healthcheck probes for the TLS sidecar.

The logLevel property specifies the logging level. The following logging levels are supported:

emerg
alert
crit
err
warning
notice
info
debug

The default value is notice.

Example TLS sidecar configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: Kafka
metadata:
  name: my-cluster
spec:
  # ...
  entityOperator:
    # ...
    tlsSidecar:
      resources:
        requests:
          cpu: 200m
          memory: 64Mi
        limits:
          cpu: 500m
          memory: 128Mi
    # ...
  cruiseControl:
    # ...
    tlsSidecar:
      image: my-org/my-image:latest
      resources:
        requests:
          cpu: 200m
          memory: 64Mi
        limits:
          cpu: 500m
          memory: 128Mi
      logLevel: debug
      readinessProbe:
        initialDelaySeconds: 15
        timeoutSeconds: 5
      livenessProbe:
        initialDelaySeconds: 15
        timeoutSeconds: 5
    # ...

13.2.47.1. `TlsSidecar` schema properties

Property	Description
image	The docker image for the container.
string	The docker image for the container.
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
logLevel	The log level for the TLS sidecar. Default value is `notice`.
string (one of [emerg, debug, crit, err, alert, warning, notice, info])
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements

13.2.48. `EntityOperatorTemplate` schema reference

Used in: EntityOperatorSpec

Property	Description
deployment	Template for Entity Operator `Deployment`.
`ResourceTemplate`	Template for Entity Operator `Deployment`.
pod	Template for Entity Operator `Pods`.
`PodTemplate`	Template for Entity Operator `Pods`.
topicOperatorContainer	Template for the Entity Topic Operator container.
`ContainerTemplate`	Template for the Entity Topic Operator container.
userOperatorContainer	Template for the Entity User Operator container.
`ContainerTemplate`	Template for the Entity User Operator container.
tlsSidecarContainer	Template for the Entity Operator TLS sidecar container.
`ContainerTemplate`	Template for the Entity Operator TLS sidecar container.
serviceAccount	Template for the Entity Operator service account.
`ResourceTemplate`	Template for the Entity Operator service account.

13.2.49. `CertificateAuthority` schema reference

Used in: KafkaSpec

Configuration of how TLS certificates are used within the cluster. This applies to certificates used for both internal communication within the cluster and to certificates used for client access via Kafka.spec.kafka.listeners.tls.

Property	Description
generateCertificateAuthority	If true then Certificate Authority certificates will be generated automatically. Otherwise the user will need to provide a Secret with the CA certificate. Default is true.
boolean
generateSecretOwnerReference	If `true`, the Cluster and Client CA Secrets are configured with the `ownerReference` set to the `Kafka` resource. If the `Kafka` resource is deleted when `true`, the CA Secrets are also deleted. If `false`, the `ownerReference` is disabled. If the `Kafka` resource is deleted when `false`, the CA Secrets are retained and available for reuse. Default is `true`.
boolean
validityDays	The number of days generated certificates should be valid for. The default is 365.
integer
renewalDays	The number of days in the certificate renewal period. This is the number of days before the a certificate expires during which renewal actions may be performed. When `generateCertificateAuthority` is true, this will cause the generation of a new certificate. When `generateCertificateAuthority` is true, this will cause extra logging at WARN level about the pending certificate expiry. Default is 30.
integer
certificateExpirationPolicy	How should CA certificate expiration be handled when `generateCertificateAuthority=true`. The default is for a new CA certificate to be generated reusing the existing private key.
string (one of [replace-key, renew-certificate])

13.2.50. `CruiseControlSpec` schema reference

Used in: KafkaSpec

Property	Description
image	The docker image for the pods.
string	The docker image for the pods.
tlsSidecar	TLS sidecar configuration.
`TlsSidecar`	TLS sidecar configuration.
resources	CPU and memory resources to reserve for the Cruise Control container. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
livenessProbe	Pod liveness checking for the Cruise Control container.
`Probe`	Pod liveness checking for the Cruise Control container.
readinessProbe	Pod readiness checking for the Cruise Control container.
`Probe`	Pod readiness checking for the Cruise Control container.
jvmOptions	JVM Options for the Cruise Control container.
`JvmOptions`	JVM Options for the Cruise Control container.
logging	Logging configuration (Log4j 2) for Cruise Control. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
template	Template to specify how Cruise Control resources, `Deployments` and `Pods`, are generated.
`CruiseControlTemplate`
brokerCapacity	The Cruise Control `brokerCapacity` configuration.
`BrokerCapacity`	The Cruise Control `brokerCapacity` configuration.
config	The Cruise Control configuration. For a full list of configuration options refer to https://github.com/linkedin/cruise-control/wiki/Configurations. Note that properties with the following prefixes cannot be set: bootstrap.servers, client.id, zookeeper., network., security., failed.brokers.zk.path,webserver.http., webserver.api.urlprefix, webserver.session.path, webserver.accesslog., two.step., request.reason.required,metric.reporter.sampler.bootstrap.servers, metric.reporter.topic, partition.metric.sample.store.topic, broker.metric.sample.store.topic,capacity.config.file, self.healing., anomaly.detection., ssl. (with the exception of: ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols, webserver.http.cors.enabled,webserver.http.cors.origin, webserver.http.cors.exposeheaders).
map
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`

13.2.51. `CruiseControlTemplate` schema reference

Used in: CruiseControlSpec

Property	Description
deployment	Template for Cruise Control `Deployment`.
`ResourceTemplate`	Template for Cruise Control `Deployment`.
pod	Template for Cruise Control `Pods`.
`PodTemplate`	Template for Cruise Control `Pods`.
apiService	Template for Cruise Control API `Service`.
`InternalServiceTemplate`	Template for Cruise Control API `Service`.
podDisruptionBudget	Template for Cruise Control `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for Cruise Control `PodDisruptionBudget`.
cruiseControlContainer	Template for the Cruise Control container.
`ContainerTemplate`	Template for the Cruise Control container.
tlsSidecarContainer	Template for the Cruise Control TLS sidecar container.
`ContainerTemplate`	Template for the Cruise Control TLS sidecar container.
serviceAccount	Template for the Cruise Control service account.
`ResourceTemplate`	Template for the Cruise Control service account.

13.2.52. `BrokerCapacity` schema reference

Used in: CruiseControlSpec

Property	Description
disk	Broker capacity for disk in bytes, for example, 100Gi.
string	Broker capacity for disk in bytes, for example, 100Gi.
cpuUtilization	Broker capacity for CPU resource utilization as a percentage (0 - 100).
integer
inboundNetwork	Broker capacity for inbound network throughput in bytes per second, for example, 10000KB/s.
string
outboundNetwork	Broker capacity for outbound network throughput in bytes per second, for example 10000KB/s.
string

13.2.53. `KafkaExporterSpec` schema reference

Used in: KafkaSpec

Property	Description
image	The docker image for the pods.
string	The docker image for the pods.
groupRegex	Regular expression to specify which consumer groups to collect. Default value is `.*`.
string
topicRegex	Regular expression to specify which topics to collect. Default value is `.*`.
string
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
logging	Only log messages with the given severity or above. Valid levels: [`debug`, `info`, `warn`, `error`, `fatal`]. Default log level is `info`.
string
enableSaramaLogging	Enable Sarama logging, a Go client library used by the Kafka Exporter.
boolean
template	Customization of deployment templates and pods.
`KafkaExporterTemplate`	Customization of deployment templates and pods.
livenessProbe	Pod liveness check.
`Probe`	Pod liveness check.
readinessProbe	Pod readiness check.
`Probe`	Pod readiness check.

13.2.54. `KafkaExporterTemplate` schema reference

Used in: KafkaExporterSpec

Property	Description
deployment	Template for Kafka Exporter `Deployment`.
`ResourceTemplate`	Template for Kafka Exporter `Deployment`.
pod	Template for Kafka Exporter `Pods`.
`PodTemplate`	Template for Kafka Exporter `Pods`.
service	The `service` property has been deprecated. The Kafka Exporter service has been removed. Template for Kafka Exporter `Service`.
`ResourceTemplate`
container	Template for the Kafka Exporter container.
`ContainerTemplate`	Template for the Kafka Exporter container.
serviceAccount	Template for the Kafka Exporter service account.
`ResourceTemplate`	Template for the Kafka Exporter service account.

13.2.55. `KafkaStatus` schema reference

Used in: Kafka

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
listeners	Addresses of the internal and external listeners.
`ListenerStatus` array	Addresses of the internal and external listeners.
clusterId	Kafka cluster Id.
string	Kafka cluster Id.

13.2.56. `Condition` schema reference

Used in: KafkaBridgeStatus, KafkaConnectorStatus, KafkaConnectS2IStatus, KafkaConnectStatus, KafkaMirrorMaker2Status, KafkaMirrorMakerStatus, KafkaRebalanceStatus, KafkaStatus, KafkaTopicStatus, KafkaUserStatus

Property	Description
type	The unique identifier of a condition, used to distinguish between other conditions in the resource.
string
status	The status of the condition, either True, False or Unknown.
string	The status of the condition, either True, False or Unknown.
lastTransitionTime	Last time the condition of a type changed from one status to another. The required format is 'yyyy-MM-ddTHH:mm:ssZ', in the UTC time zone.
string
reason	The reason for the condition’s last transition (a single word in CamelCase).
string
message	Human-readable message indicating details about the condition’s last transition.
string

13.2.57. `ListenerStatus` schema reference

Used in: KafkaStatus

Property	Description
type	The type of the listener. Can be one of the following three types: `plain`, `tls`, and `external`.
string
addresses	A list of the addresses for this listener.
`ListenerAddress` array	A list of the addresses for this listener.
bootstrapServers	A comma-separated list of `host:port` pairs for connecting to the Kafka cluster using this listener.
string
certificates	A list of TLS certificates which can be used to verify the identity of the server when connecting to the given listener. Set only for `tls` and `external` listeners.
string array

13.2.58. `ListenerAddress` schema reference

Used in: ListenerStatus

Property	Description
host	The DNS name or IP address of the Kafka bootstrap service.
string	The DNS name or IP address of the Kafka bootstrap service.
port	The port of the Kafka bootstrap service.
integer	The port of the Kafka bootstrap service.

13.2.59. `KafkaConnect` schema reference

Property	Description
spec	The specification of the Kafka Connect cluster.
`KafkaConnectSpec`	The specification of the Kafka Connect cluster.
status	The status of the Kafka Connect cluster.
`KafkaConnectStatus`	The status of the Kafka Connect cluster.

13.2.60. `KafkaConnectSpec` schema reference

Used in: KafkaConnect

Full list of KafkaConnectSpec schema properties

Configures a Kafka Connect cluster.

13.2.60.1. `config`

Use the config properties to configure Kafka options as keys.

Standard Apache Kafka Connect configuration may be provided, restricted to those properties not managed directly by AMQ Streams.

Configuration options that cannot be configured relate to:

Kafka cluster bootstrap address
Security (Encryption, Authentication, and Authorization)
Listener / REST interface configuration
Plugin path configuration

The values can be one of the following JSON types:

String
Number
Boolean

You can specify and configure the options listed in the Apache Kafka documentation with the exception of those options that are managed directly by AMQ Streams. Specifically, configuration options with keys equal to or starting with one of the following strings are forbidden:

ssl.
sasl.
security.
listeners
plugin.path
rest.
bootstrap.servers

When a forbidden option is present in the config property, it is ignored and a warning message is printed to the Cluster Operator log file. All other options are passed to Kafka Connect.

Important

The Cluster Operator does not validate keys or values in the config object provided. When an invalid configuration is provided, the Kafka Connect cluster might not start or might become unstable. In this circumstance, fix the configuration in the KafkaConnect.spec.config or KafkaConnectS2I.spec.config object, then the Cluster Operator can roll out the new configuration to all Kafka Connect nodes.

Certain options have default values:

group.id with default value connect-cluster
offset.storage.topic with default value connect-cluster-offsets
config.storage.topic with default value connect-cluster-configs
status.storage.topic with default value connect-cluster-status
key.converter with default value org.apache.kafka.connect.json.JsonConverter
value.converter with default value org.apache.kafka.connect.json.JsonConverter

These options are automatically configured in case they are not present in the KafkaConnect.spec.config or KafkaConnectS2I.spec.config properties.

There are exceptions to the forbidden options. You can use three allowed ssl configuration options for client connection using a specific cipher suite for a TLS version. A cipher suite combines algorithms for secure connection and data transfer. You can also configure the ssl.endpoint.identification.algorithm property to enable or disable hostname verification.

Example Kafka Connect configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  config:
    group.id: my-connect-cluster
    offset.storage.topic: my-connect-cluster-offsets
    config.storage.topic: my-connect-cluster-configs
    status.storage.topic: my-connect-cluster-status
    key.converter: org.apache.kafka.connect.json.JsonConverter
    value.converter: org.apache.kafka.connect.json.JsonConverter
    key.converter.schemas.enable: true
    value.converter.schemas.enable: true
    config.storage.replication.factor: 3
    offset.storage.replication.factor: 3
    status.storage.replication.factor: 3
    ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"
    ssl.enabled.protocols: "TLSv1.2"
    ssl.protocol: "TLSv1.2"
    ssl.endpoint.identification.algorithm: HTTPS
  # ...

For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties. You can also configure the ssl.endpoint.identification.algorithm property to enable or disable hostname verification.

13.2.60.2. `logging`

Kafka Connect (and Kafka Connect with Source2Image support) has its own configurable loggers:

connect.root.logger.level
log4j.logger.org.reflections

Further loggers are added depending on the Kafka Connect plugins running.

Use a curl request to get a complete list of Kafka Connect loggers running from any Kafka broker pod:

curl -s http://<connect-cluster-name>-connect-api:8083/admin/loggers/

Kafka Connect uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
spec:
  # ...
  logging:
    type: inline
    loggers:
      connect.root.logger.level: "INFO"
  # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: connect-logging.log4j
  # ...

Any available loggers that are not configured have their level set to OFF.

If Kafka Connect was deployed using the Cluster Operator, changes to Kafka Connect logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.60.3. `KafkaConnectSpec` schema properties

Property	Description
version	The Kafka Connect version. Defaults to 2.8.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.
string
replicas	The number of pods in the Kafka Connect group.
integer	The number of pods in the Kafka Connect group.
image	The docker image for the pods.
string	The docker image for the pods.
bootstrapServers	Bootstrap servers to connect to. This should be given as a comma separated list of <hostname>:‍<port> pairs.
string
tls	TLS configuration.
`KafkaConnectTls`	TLS configuration.
authentication	Authentication configuration for Kafka Connect. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
config	The Kafka Connect configuration. Properties with the following prefixes cannot be set: ssl., sasl., security., listeners, plugin.path, rest., bootstrap.servers, consumer.interceptor.classes, producer.interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map
resources	The maximum limits for CPU and memory resources and the requested initial resources. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
jmxOptions	JMX Options.
`KafkaJmxOptions`	JMX Options.
logging	Logging configuration for Kafka Connect. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
tracing	The configuration of tracing in Kafka Connect. The type depends on the value of the `tracing.type` property within the given object, which must be one of [jaeger].
`JaegerTracing`
template	Template for Kafka Connect and Kafka Connect S2I resources. The template allows users to specify how the `Deployment`, `Pods` and `Service` are generated.
`KafkaConnectTemplate`
externalConfiguration	Pass data from Secrets or ConfigMaps to the Kafka Connect pods and use them to configure connectors.
`ExternalConfiguration`
build	Configures how the Connect container image should be built. Optional.
`Build`
clientRackInitImage	The image of the init container used for initializing the `client.rack`.
string
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`
rack	Configuration of the node label which will be used as the client.rack consumer configuration.
`Rack`

13.2.61. `KafkaConnectTls` schema reference

Used in: KafkaConnectS2ISpec, KafkaConnectSpec

Full list of KafkaConnectTls schema properties

Configures TLS trusted certificates for connecting Kafka Connect to the cluster.

13.2.61.1. `trustedCertificates`

Provide a list of secrets using the trustedCertificates property.

13.2.61.2. `KafkaConnectTls` schema properties

Property	Description
trustedCertificates	Trusted certificates for TLS connection.
`CertSecretSource` array	Trusted certificates for TLS connection.

13.2.62. `KafkaClientAuthenticationTls` schema reference

Used in: KafkaBridgeSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationTls schema properties

To configure TLS client authentication, set the type property to the value tls. TLS client authentication uses a TLS certificate to authenticate.

13.2.62.1. `certificateAndKey`

The certificate is specified in the certificateAndKey property and is always loaded from an OpenShift secret. In the secret, the certificate must be stored in X509 format under two different keys: public and private.

You can use the secrets created by the User Operator, or you can create your own TLS certificate file, with the keys used for authentication, then create a Secret from the file:

oc create secret generic MY-SECRET \
--from-file=MY-PUBLIC-TLS-CERTIFICATE-FILE.crt \
--from-file=MY-PRIVATE.key

Note

TLS client authentication can only be used with TLS connections.

Example TLS client authentication configuration

authentication:
  type: tls
  certificateAndKey:
    secretName: my-secret
    certificate: my-public-tls-certificate-file.crt
    key: private.key

13.2.62.2. `KafkaClientAuthenticationTls` schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationTls type from KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth. It must have the value tls for the type KafkaClientAuthenticationTls.

Property	Description
certificateAndKey	Reference to the `Secret` which holds the certificate and private key pair.
`CertAndKeySecretSource`
type	Must be `tls`.
string	Must be `tls`.

13.2.63. `KafkaClientAuthenticationScramSha512` schema reference

Used in: KafkaBridgeSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationScramSha512 schema properties

To configure SASL-based SCRAM-SHA-512 authentication, set the type property to scram-sha-512. The SCRAM-SHA-512 authentication mechanism requires a username and password.

13.2.63.1. `username`

Specify the username in the username property.

13.2.63.2. `passwordSecret`

In the passwordSecret property, specify a link to a Secret containing the password.

You can use the secrets created by the User Operator.

If required, you can create a text file that contains the password, in cleartext, to use for authentication:

echo -n PASSWORD > MY-PASSWORD.txt

You can then create a Secret from the text file, setting your own field name (key) for the password:

oc create secret generic MY-CONNECT-SECRET-NAME --from-file=MY-PASSWORD-FIELD-NAME=./MY-PASSWORD.txt

Example Secret for SCRAM-SHA-512 client authentication for Kafka Connect

apiVersion: v1
kind: Secret
metadata:
  name: my-connect-secret-name
type: Opaque
data:
  my-connect-password-field: LFTIyFRFlMmU2N2Tm

The secretName property contains the name of the Secret, and the password property contains the name of the key under which the password is stored inside the Secret.

Important

Do not specify the actual password in the password property.

Example SASL-based SCRAM-SHA-512 client authentication configuration for Kafka Connect

authentication:
  type: scram-sha-512
  username: my-connect-username
  passwordSecret:
    secretName: my-connect-secret-name
    password: my-connect-password-field

13.2.63.3. `KafkaClientAuthenticationScramSha512` schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationScramSha512 type from KafkaClientAuthenticationTls, KafkaClientAuthenticationPlain, KafkaClientAuthenticationOAuth. It must have the value scram-sha-512 for the type KafkaClientAuthenticationScramSha512.

Property	Description
passwordSecret	Reference to the `Secret` which holds the password.
`PasswordSecretSource`	Reference to the `Secret` which holds the password.
type	Must be `scram-sha-512`.
string	Must be `scram-sha-512`.
username	Username used for the authentication.
string	Username used for the authentication.

13.2.64. `PasswordSecretSource` schema reference

Used in: KafkaClientAuthenticationPlain, KafkaClientAuthenticationScramSha512

Property	Description
password	The name of the key in the Secret under which the password is stored.
string
secretName	The name of the Secret containing the password.
string	The name of the Secret containing the password.

13.2.65. `KafkaClientAuthenticationPlain` schema reference

Used in: KafkaBridgeSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationPlain schema properties

To configure SASL-based PLAIN authentication, set the type property to plain. SASL PLAIN authentication mechanism requires a username and password.

Warning

The SASL PLAIN mechanism will transfer the username and password across the network in cleartext. Only use SASL PLAIN authentication if TLS encryption is enabled.

13.2.65.1. `username`

Specify the username in the username property.

13.2.65.2. `passwordSecret`

In the passwordSecret property, specify a link to a Secret containing the password.

You can use the secrets created by the User Operator.

If required, create a text file that contains the password, in cleartext, to use for authentication:

echo -n PASSWORD > MY-PASSWORD.txt

You can then create a Secret from the text file, setting your own field name (key) for the password:

oc create secret generic MY-CONNECT-SECRET-NAME --from-file=MY-PASSWORD-FIELD-NAME=./MY-PASSWORD.txt

Example Secret for PLAIN client authentication for Kafka Connect

apiVersion: v1
kind: Secret
metadata:
  name: my-connect-secret-name
type: Opaque
data:
  my-password-field-name: LFTIyFRFlMmU2N2Tm

The secretName property contains the name of the Secret and the password property contains the name of the key under which the password is stored inside the Secret.

Important

Do not specify the actual password in the password property.

An example SASL based PLAIN client authentication configuration

authentication:
  type: plain
  username: my-connect-username
  passwordSecret:
    secretName: my-connect-secret-name
    password: my-password-field-name

13.2.65.3. `KafkaClientAuthenticationPlain` schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationPlain type from KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationOAuth. It must have the value plain for the type KafkaClientAuthenticationPlain.

Property	Description
passwordSecret	Reference to the `Secret` which holds the password.
`PasswordSecretSource`	Reference to the `Secret` which holds the password.
type	Must be `plain`.
string	Must be `plain`.
username	Username used for the authentication.
string	Username used for the authentication.

13.2.66. `KafkaClientAuthenticationOAuth` schema reference

Used in: KafkaBridgeSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2ClusterSpec, KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaClientAuthenticationOAuth schema properties

To configure OAuth client authentication, set the type property to oauth.

OAuth authentication can be configured using one of the following options:

Client ID and secret
Client ID and refresh token
Access token
TLS

Client ID and secret

You can configure the address of your authorization server in the tokenEndpointUri property together with the client ID and client secret used in authentication. The OAuth client will connect to the OAuth server, authenticate using the client ID and secret and get an access token which it will use to authenticate with the Kafka broker. In the clientSecret property, specify a link to a Secret containing the client secret.

An example of OAuth client authentication using client ID and client secret

authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  clientSecret:
    secretName: my-client-oauth-secret
    key: client-secret

Optionally, scope and audience can be specified if needed.

Client ID and refresh token

You can configure the address of your OAuth server in the tokenEndpointUri property together with the OAuth client ID and refresh token. The OAuth client will connect to the OAuth server, authenticate using the client ID and refresh token and get an access token which it will use to authenticate with the Kafka broker. In the refreshToken property, specify a link to a Secret containing the refresh token.

+ .An example of OAuth client authentication using client ID and refresh token

authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token

Access token

You can configure the access token used for authentication with the Kafka broker directly. In this case, you do not specify the tokenEndpointUri. In the accessToken property, specify a link to a Secret containing the access token.

An example of OAuth client authentication using only an access token

authentication:
  type: oauth
  accessToken:
    secretName: my-access-token-secret
    key: access-token

TLS

Accessing the OAuth server using the HTTPS protocol does not require any additional configuration as long as the TLS certificates used by it are signed by a trusted certification authority and its hostname is listed in the certificate.

If your OAuth server is using certificates which are self-signed or are signed by a certification authority which is not trusted, you can configure a list of trusted certificates in the custom resource. The tlsTrustedCertificates property contains a list of secrets with key names under which the certificates are stored. The certificates must be stored in X509 format.

An example of TLS certificates provided

authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token
  tlsTrustedCertificates:
    - secretName: oauth-server-ca
      certificate: tls.crt

The OAuth client will by default verify that the hostname of your OAuth server matches either the certificate subject or one of the alternative DNS names. If it is not required, you can disable the hostname verification.

An example of disabled TLS hostname verification

authentication:
  type: oauth
  tokenEndpointUri: https://sso.myproject.svc:8443/auth/realms/internal/protocol/openid-connect/token
  clientId: my-client-id
  refreshToken:
    secretName: my-refresh-token-secret
    key: refresh-token
  disableTlsHostnameVerification: true

13.2.66.1. `KafkaClientAuthenticationOAuth` schema properties

The type property is a discriminator that distinguishes use of the KafkaClientAuthenticationOAuth type from KafkaClientAuthenticationTls, KafkaClientAuthenticationScramSha512, KafkaClientAuthenticationPlain. It must have the value oauth for the type KafkaClientAuthenticationOAuth.

Property	Description
accessToken	Link to OpenShift Secret containing the access token which was obtained from the authorization server.
`GenericSecretSource`
accessTokenIsJwt	Configure whether access token should be treated as JWT. This should be set to `false` if the authorization server returns opaque tokens. Defaults to `true`.
boolean
audience	OAuth audience to use when authenticating against the authorization server. Some authorization servers require the audience to be explicitly set. The possible values depend on how the authorization server is configured. By default, `audience` is not specified when performing the token endpoint request.
string
clientId	OAuth Client ID which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.
string
clientSecret	Link to OpenShift Secret containing the OAuth client secret which the Kafka client can use to authenticate against the OAuth server and use the token endpoint URI.
`GenericSecretSource`
disableTlsHostnameVerification	Enable or disable TLS hostname verification. Default value is `false`.
boolean
maxTokenExpirySeconds	Set or limit time-to-live of the access tokens to the specified number of seconds. This should be set if the authorization server returns opaque tokens.
integer
refreshToken	Link to OpenShift Secret containing the refresh token which can be used to obtain access token from the authorization server.
`GenericSecretSource`
scope	OAuth scope to use when authenticating against the authorization server. Some authorization servers require this to be set. The possible values depend on how authorization server is configured. By default `scope` is not specified when doing the token endpoint request.
string
tlsTrustedCertificates	Trusted certificates for TLS connection to the OAuth server.
`CertSecretSource` array
tokenEndpointUri	Authorization server token endpoint URI.
string	Authorization server token endpoint URI.
type	Must be `oauth`.
string	Must be `oauth`.

13.2.67. `JaegerTracing` schema reference

Used in: KafkaBridgeSpec, KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec, KafkaMirrorMakerSpec

The type property is a discriminator that distinguishes use of the JaegerTracing type from other subtypes which may be added in the future. It must have the value jaeger for the type JaegerTracing.

Property	Description
type	Must be `jaeger`.
string	Must be `jaeger`.

13.2.68. `KafkaConnectTemplate` schema reference

Used in: KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec

Property	Description
deployment	Template for Kafka Connect `Deployment`.
`DeploymentTemplate`	Template for Kafka Connect `Deployment`.
pod	Template for Kafka Connect `Pods`.
`PodTemplate`	Template for Kafka Connect `Pods`.
apiService	Template for Kafka Connect API `Service`.
`InternalServiceTemplate`	Template for Kafka Connect API `Service`.
connectContainer	Template for the Kafka Connect container.
`ContainerTemplate`	Template for the Kafka Connect container.
initContainer	Template for the Kafka init container.
`ContainerTemplate`	Template for the Kafka init container.
podDisruptionBudget	Template for Kafka Connect `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for Kafka Connect `PodDisruptionBudget`.
serviceAccount	Template for the Kafka Connect service account.
`ResourceTemplate`	Template for the Kafka Connect service account.
clusterRoleBinding	Template for the Kafka Connect ClusterRoleBinding.
`ResourceTemplate`	Template for the Kafka Connect ClusterRoleBinding.
buildPod	Template for Kafka Connect Build `Pods`. The build pod is used only on OpenShift.
`PodTemplate`
buildContainer	Template for the Kafka Connect Build container. The build container is used only on OpenShift.
`ContainerTemplate`
buildConfig	Template for the Kafka Connect BuildConfig used to build new container images. The BuildConfig is used only on OpenShift.
`ResourceTemplate`
buildServiceAccount	Template for the Kafka Connect Build service account.
`ResourceTemplate`	Template for the Kafka Connect Build service account.

13.2.69. `DeploymentTemplate` schema reference

Used in: KafkaBridgeTemplate, KafkaConnectTemplate, KafkaMirrorMakerTemplate

Property	Description
metadata	Metadata applied to the resource.
`MetadataTemplate`	Metadata applied to the resource.
deploymentStrategy	DeploymentStrategy which will be used for this Deployment. Valid values are `RollingUpdate` and `Recreate`. Defaults to `RollingUpdate`.
string (one of [RollingUpdate, Recreate])

13.2.70. `ExternalConfiguration` schema reference

Used in: KafkaConnectS2ISpec, KafkaConnectSpec, KafkaMirrorMaker2Spec

Full list of ExternalConfiguration schema properties

Configures external storage properties that define configuration options for Kafka Connect connectors.

You can mount ConfigMaps or Secrets into a Kafka Connect pod as environment variables or volumes. Volumes and environment variables are configured in the externalConfiguration property in KafkaConnect.spec and KafkaConnectS2I.spec.

When applied, the environment variables and volumes are available for use when developing your connectors.

13.2.70.1. `env`

Use the env property to specify one or more environment variables. These variables can contain a value from either a ConfigMap or a Secret.

Example Secret containing values for environment variables

apiVersion: v1
kind: Secret
metadata:
  name: aws-creds
type: Opaque
data:
  awsAccessKey: QUtJQVhYWFhYWFhYWFhYWFg=
  awsSecretAccessKey: Ylhsd1lYTnpkMjl5WkE=

Note

The names of user-defined environment variables cannot start with KAFKA_ or STRIMZI_.

To mount a value from a Secret to an environment variable, use the valueFrom property and the secretKeyRef.

Example environment variables set to values from a Secret

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  externalConfiguration:
    env:
      - name: AWS_ACCESS_KEY_ID
        valueFrom:
          secretKeyRef:
            name: aws-creds
            key: awsAccessKey
      - name: AWS_SECRET_ACCESS_KEY
        valueFrom:
          secretKeyRef:
            name: aws-creds
            key: awsSecretAccessKey

A common use case for mounting Secrets is for a connector to communicate with Amazon AWS. The connector needs to be able to read the AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

To mount a value from a ConfigMap to an environment variable, use configMapKeyRef in the valueFrom property as shown in the following example.

Example environment variables set to values from a ConfigMap

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  externalConfiguration:
    env:
      - name: MY_ENVIRONMENT_VARIABLE
        valueFrom:
          configMapKeyRef:
            name: my-config-map
            key: my-key

13.2.70.2. `volumes`

Use volumes to mount ConfigMaps or Secrets to a Kafka Connect pod.

Using volumes instead of environment variables is useful in the following scenarios:

Mounting a properties file that is used to configure Kafka Connect connectors
Mounting truststores or keystores with TLS certificates

Volumes are mounted inside the Kafka Connect containers on the path /opt/kafka/external-configuration/<volume-name>. For example, the files from a volume named connector-config will appear in the directory /opt/kafka/external-configuration/connector-config.

Configuration providers load values from outside the configuration. Use a provider mechanism to avoid passing restricted information over the Kafka Connect REST interface.

FileConfigProvider loads configuration values from properties in a file.
DirectoryConfigProvider loads configuration values from separate files within a directory structure.

Use a comma-separated list if you want to add more than one provider, including custom providers. You can use custom providers to load values from other file locations.

Using FileConfigProvider to load property values

In this example, a Secret named mysecret contains connector properties that specify a database name and password:

Example Secret with database properties

apiVersion: v1
kind: Secret
metadata:
  name: mysecret
type: Opaque
stringData:
  connector.properties: |- 1
    dbUsername: my-username 2
    dbPassword: my-password

1: The connector configuration in properties file format.
2: Database username and password properties used in the configuration.

The Secret and the FileConfigProvider configuration provider are specified in the Kafka Connect configuration.

The Secret is mounted to a volume named connector-config.
FileConfigProvider is given the alias file.

Example external volumes set to values from a Secret

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  config:
    config.providers: file 1
    config.providers.file.class: org.apache.kafka.common.config.provider.FileConfigProvider 2
  #...
  externalConfiguration:
    volumes:
      - name: connector-config 3
        secret:
          secretName: mysecret 4

1: The alias for the configuration provider is used to define other configuration parameters.
2: FileConfigProvider provides values from properties files. The parameter uses the alias from config.providers, taking the form config.providers.${alias}.class.
3: The name of the volume containing the Secret. Each volume must specify a name in the name property and a reference to a ConfigMap or Secret.
4: The name of the Secret.

Placeholders for the property values in the Secret are referenced in the connector configuration. The placeholder structure is file:PATH-AND-FILE-NAME:PROPERTY. FileConfigProvider reads and extracts the database username and password property values from the mounted Secret in connector configurations.

Example connector configuration showing placeholders for external values

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnector
metadata:
  name: my-source-connector
  labels:
    strimzi.io/cluster: my-connect-cluster
spec:
  class: io.debezium.connector.mysql.MySqlConnector
  tasksMax: 2
  config:
    database.hostname: 192.168.99.1
    database.port: "3306"
    database.user: "${file:/opt/kafka/external-configuration/connector-config/mysecret:dbUsername}"
    database.password: "${file:/opt/kafka/external-configuration/connector-config/mysecret:dbPassword}"
    database.server.id: "184054"
    #...

Using DirectoryConfigProvider to load property values from separate files

In this example, a Secret contains TLS truststore and keystore user credentials in separate files.

Example Secret with user credentials

apiVersion: v1
kind: Secret
metadata:
  name: mysecret
  labels:
    strimzi.io/kind: KafkaUser
    strimzi.io/cluster: my-cluster
type: Opaque
data: 1
  ca.crt: # Public key of the client CA
  user.crt: # User certificate that contains the public key of the user
  user.key: # Private key of the user
  user.p12: # PKCS #12 archive file for storing certificates and keys
  user.password: # Password for protecting the PKCS #12 archive file

The Secret and the DirectoryConfigProvider configuration provider are specified in the Kafka Connect configuration.

The Secret is mounted to a volume named connector-config.
DirectoryConfigProvider is given the alias directory.

Example external volumes set for user credentials files

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect
spec:
  # ...
  config:
    config.providers: directory
    config.providers.directory.class: org.apache.kafka.common.config.provider.DirectoryConfigProvider 1
  #...
  externalConfiguration:
    volumes:
      - name: connector-config
        secret:
          secretName: mysecret

1 1: The DirectoryConfigProvider provides values from files in a directory. The parameter uses the alias from config.providers, taking the form config.providers.${alias}.class.

Placeholders for the credentials are referenced in the connector configuration. The placeholder structure is directory:PATH:FILE-NAME. DirectoryConfigProvider reads and extracts the credentials from the mounted Secret in connector configurations.

Example connector configuration showing placeholders for external values

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnector
metadata:
  name: my-source-connector
  labels:
    strimzi.io/cluster: my-connect-cluster
spec:
  class: io.debezium.connector.mysql.MySqlConnector
  tasksMax: 2
  config:
    security.protocol: SSL
    ssl.truststore.type: PEM
    ssl.truststore.location: "${directory:/opt/kafka/external-configuration/connector-config:ca.crt}"
    ssl.keystore.type: PEM
    ssl.keystore.location: ${directory:/opt/kafka/external-configuration/connector-config:user.key}"
    #...

13.2.70.3. `ExternalConfiguration` schema properties

Property	Description
env	Makes data from a Secret or ConfigMap available in the Kafka Connect pods as environment variables.
`ExternalConfigurationEnv` array
volumes	Makes data from a Secret or ConfigMap available in the Kafka Connect pods as volumes.
`ExternalConfigurationVolumeSource` array

13.2.71. `ExternalConfigurationEnv` schema reference

Used in: ExternalConfiguration

Property	Description
name	Name of the environment variable which will be passed to the Kafka Connect pods. The name of the environment variable cannot start with `KAFKA_` or `STRIMZI_`.
string
valueFrom	Value of the environment variable which will be passed to the Kafka Connect pods. It can be passed either as a reference to Secret or ConfigMap field. The field has to specify exactly one Secret or ConfigMap.
`ExternalConfigurationEnvVarSource`

13.2.72. `ExternalConfigurationEnvVarSource` schema reference

Used in: ExternalConfigurationEnv

Property	Description
configMapKeyRef	Reference to a key in a ConfigMap. For more information, see the external documentation for core/v1 configmapkeyselector.
ConfigMapKeySelector
secretKeyRef	Reference to a key in a Secret. For more information, see the external documentation for core/v1 secretkeyselector.
SecretKeySelector

13.2.73. `ExternalConfigurationVolumeSource` schema reference

Used in: ExternalConfiguration

Property	Description
configMap	Reference to a key in a ConfigMap. Exactly one Secret or ConfigMap has to be specified. For more information, see the external documentation for core/v1 configmapvolumesource.
ConfigMapVolumeSource
name	Name of the volume which will be added to the Kafka Connect pods.
string
secret	Reference to a key in a Secret. Exactly one Secret or ConfigMap has to be specified. For more information, see the external documentation for core/v1 secretvolumesource.
SecretVolumeSource

13.2.74. `Build` schema reference

Used in: KafkaConnectS2ISpec, KafkaConnectSpec

Full list of Build schema properties

Configures additional connectors for Kafka Connect deployments.

13.2.74.1. `output`

To build new container images with additional connector plugins, AMQ Streams requires a container registry where the images can be pushed to, stored, and pulled from. AMQ Streams does not run its own container registry, so a registry must be provided. AMQ Streams supports private container registries as well as public registries such as Quay or Docker Hub. The container registry is configured in the .spec.build.output section of the KafkaConnect custom resource. The output configuration, which is required, supports two types: docker and imagestream.

Using Docker registry

To use a Docker registry, you have to specify the type as docker, and the image field with the full name of the new container image. The full name must include:

The address of the registry
Port number (if listening on a non-standard port)
The tag of the new container image

Example valid container image names:

docker.io/my-org/my-image/my-tag
quay.io/my-org/my-image/my-tag
image-registry.image-registry.svc:5000/myproject/kafka-connect-build:latest

Each Kafka Connect deployment must use a separate image, which can mean different tags at the most basic level.

If the registry requires authentication, use the pushSecret to set a name of the Secret with the registry credentials. For the Secret, use the kubernetes.io/dockerconfigjson type and a .dockerconfigjson file to contain the Docker credentials. For more information on pulling an image from a private registry, see Create a Secret based on existing Docker credentials.

Example output configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      type: docker 1
      image: my-registry.io/my-org/my-connect-cluster:latest 2
      pushSecret: my-registry-credentials 3
  #...

1: (Required) Type of output used by AMQ Streams.
2: (Required) Full name of the image used, including the repository and tag.
3: (Optional) Name of the secret with the container registry credentials.

Using OpenShift ImageStream

Instead of Docker, you can use OpenShift ImageStream to store a new container image. The ImageStream has to be created manually before deploying Kafka Connect. To use ImageStream, set the type to imagestream, and use the image property to specify the name of the ImageStream and the tag used. For example, my-connect-image-stream:latest.

Example output configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      type: imagestream 1
      image: my-connect-build:latest 2
  #...

1: (Required) Type of output used by AMQ Streams.
2: (Required) Name of the ImageStream and tag.

13.2.74.2. `plugins`

Connector plugins are a set of files that define the implementation required to connect to certain types of external system. The connector plugins required for a container image must be configured using the .spec.build.plugins property of the KafkaConnect custom resource. Each connector plugin must have a name which is unique within the Kafka Connect deployment. Additionally, the plugin artifacts must be listed. These artifacts are downloaded by AMQ Streams, added to the new container image, and used in the Kafka Connect deployment. The connector plugin artifacts can also include additional components, such as (de)serializers. Each connector plugin is downloaded into a separate directory so that the different connectors and their dependencies are properly sandboxed. Each plugin must be configured with at least one artifact.

Example plugins configuration with two connector plugins

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins: 1
      - name: debezium-postgres-connector
        artifacts:
          - type: tgz
            url: https://repo1.maven.org/maven2/io/debezium/debezium-connector-postgres/1.3.1.Final/debezium-connector-postgres-1.3.1.Final-plugin.tar.gz
            sha512sum: 962a12151bdf9a5a30627eebac739955a4fd95a08d373b86bdcea2b4d0c27dd6e1edd5cb548045e115e33a9e69b1b2a352bee24df035a0447cb820077af00c03
      - name: camel-telegram
        artifacts:
          - type: tgz
            url: https://repo.maven.apache.org/maven2/org/apache/camel/kafkaconnector/camel-telegram-kafka-connector/0.7.0/camel-telegram-kafka-connector-0.7.0-package.tar.gz
            sha512sum: a9b1ac63e3284bea7836d7d24d84208c49cdf5600070e6bd1535de654f6920b74ad950d51733e8020bf4187870699819f54ef5859c7846ee4081507f48873479
  #...

1: (Required) List of connector plugins and their artifacts.

AMQ Streams supports the following types of artifacts: * JAR files, which are downloaded and used directly * TGZ archives, which are downloaded and unpacked * Other artifacts, which are downloaded and used directly

Important

AMQ Streams does not perform any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually, and configure the checksum verification to make sure the same artifact is used in the automated build and in the Kafka Connect deployment.

Using JAR artifacts

JAR artifacts represent a JAR file that is downloaded and added to a container image. To use a JAR artifacts, set the type property to jar, and specify the download location using the url property.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, AMQ Streams will verify the checksum of the artifact while building the new container image.

Example JAR artifact

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: jar 1
            url: https://my-domain.tld/my-jar.jar 2
            sha512sum: 589...ab4 3
          - type: jar
            url: https://my-domain.tld/my-jar2.jar
  #...

1: (Required) Type of artifact.
2: (Required) URL from which the artifact is downloaded.
3: (Optional) SHA-512 checksum to verify the artifact.

Using TGZ artifacts

TGZ artifacts are used to download TAR archives that have been compressed using Gzip compression. The TGZ artifact can contain the whole Kafka Connect connector, even when comprising multiple different files. The TGZ artifact is automatically downloaded and unpacked by AMQ Streams while building the new container image. To use TGZ artifacts, set the type property to tgz, and specify the download location using the url property.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, AMQ Streams will verify the checksum before unpacking it and building the new container image.

Example TGZ artifact

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: tgz 1
            url: https://my-domain.tld/my-connector-archive.jar 2
            sha512sum: 158...jg10 3
  #...

1: (Required) Type of artifact.
2: (Required) URL from which the archive is downloaded.
3: (Optional) SHA-512 checksum to verify the artifact.

Using other artifacts

other artifacts represent any kind of file that is downloaded and added to a container image. If you want to use a specific name for the artifact in the resulting container image, use the fileName field. If a file name is not specified, the file is named based on the URL hash.

Additionally, you can specify a SHA-512 checksum of the artifact. If specified, AMQ Streams will verify the checksum of the artifact while building the new container image.

Example other artifact

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaConnect
metadata:
  name: my-connect-cluster
spec:
  #...
  build:
    output:
      #...
    plugins:
      - name: my-plugin
        artifacts:
          - type: other  1
            url: https://my-domain.tld/my-other-file.ext  2
            sha512sum: 589...ab4  3
            fileName: name-the-file.ext  4
  #...

1: (Required) Type of artifact.
2: (Required) URL from which the artifact is downloaded.
3: (Optional) SHA-512 checksum to verify the artifact.
4: (Optional) The name under which the file is stored in the resulting container image.

13.2.74.3. `Build` schema properties

Property	Description
output	Configures where should the newly built image be stored. Required. The type depends on the value of the `output.type` property within the given object, which must be one of [docker, imagestream].
`DockerOutput`, `ImageStreamOutput`
resources	CPU and memory resources to reserve for the build. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
plugins	List of connector plugins which should be added to the Kafka Connect. Required.
`Plugin` array

13.2.75. `DockerOutput` schema reference

Used in: Build

The type property is a discriminator that distinguishes use of the DockerOutput type from ImageStreamOutput. It must have the value docker for the type DockerOutput.

Property	Description
image	The full name which should be used for tagging and pushing the newly built image. For example `quay.io/my-organization/my-custom-connect:latest`. Required.
string
pushSecret	Container Registry Secret with the credentials for pushing the newly built image.
string
additionalKanikoOptions	Configures additional options which will be passed to the Kaniko executor when building the new Connect image. Allowed options are: --customPlatform, --insecure, --insecure-pull, --insecure-registry, --log-format, --log-timestamp, --registry-mirror, --reproducible, --single-snapshot, --skip-tls-verify, --skip-tls-verify-pull, --skip-tls-verify-registry, --verbosity, --snapshotMode, --use-new-run. These options will be used only on OpenShift where the Kaniko executor is used. They will be ignored on OpenShift. The options are described in the Kaniko GitHub repository. Changing this field does not trigger new build of the Kafka Connect image.
string array
type	Must be `docker`.
string	Must be `docker`.

13.2.76. `ImageStreamOutput` schema reference

Used in: Build

The type property is a discriminator that distinguishes use of the ImageStreamOutput type from DockerOutput. It must have the value imagestream for the type ImageStreamOutput.

Property	Description
image	The name and tag of the ImageStream where the newly built image will be pushed. For example `my-custom-connect:latest`. Required.
string
type	Must be `imagestream`.
string	Must be `imagestream`.

13.2.77. `Plugin` schema reference

Used in: Build

Property	Description
name	The unique name of the connector plugin. Will be used to generate the path where the connector artifacts will be stored. The name has to be unique within the KafkaConnect resource. The name has to follow the following pattern: `^[a-z][-_a-z0-9]*[a-z]$`. Required.
string
artifacts	List of artifacts which belong to this connector plugin. Required.
`JarArtifact`, `TgzArtifact`, `ZipArtifact`, `OtherArtifact` array

13.2.78. `JarArtifact` schema reference

Used in: Plugin

Property	Description
url	URL of the artifact which will be downloaded. AMQ Streams does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required.
string
sha512sum	SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified.
string
type	Must be `jar`.
string	Must be `jar`.

13.2.79. `TgzArtifact` schema reference

Used in: Plugin

Property	Description
url	URL of the artifact which will be downloaded. AMQ Streams does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required.
string
sha512sum	SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified.
string
type	Must be `tgz`.
string	Must be `tgz`.

13.2.80. `ZipArtifact` schema reference

Used in: Plugin

Property	Description
url	URL of the artifact which will be downloaded. AMQ Streams does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required.
string
sha512sum	SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified.
string
type	Must be `zip`.
string	Must be `zip`.

13.2.81. `OtherArtifact` schema reference

Used in: Plugin

Property	Description
url	URL of the artifact which will be downloaded. AMQ Streams does not do any security scanning of the downloaded artifacts. For security reasons, you should first verify the artifacts manually and configure the checksum verification to make sure the same artifact is used in the automated build. Required.
string
sha512sum	SHA512 checksum of the artifact. Optional. If specified, the checksum will be verified while building the new container. If not specified, the downloaded artifact will not be verified.
string
fileName	Name under which the artifact will be stored.
string	Name under which the artifact will be stored.
type	Must be `other`.
string	Must be `other`.

13.2.82. `KafkaConnectStatus` schema reference

Used in: KafkaConnect

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
url	The URL of the REST API endpoint for managing and monitoring Kafka Connect connectors.
string
connectorPlugins	The list of connector plugins available in this Kafka Connect deployment.
`ConnectorPlugin` array
labelSelector	Label selector for pods providing this resource.
string	Label selector for pods providing this resource.
replicas	The current number of pods being used to provide this resource.
integer

13.2.83. `ConnectorPlugin` schema reference

Used in: KafkaConnectS2IStatus, KafkaConnectStatus, KafkaMirrorMaker2Status

Property	Description
type	The type of the connector plugin. The available types are `sink` and `source`.
string
version	The version of the connector plugin.
string	The version of the connector plugin.
class	The class of the connector plugin.
string	The class of the connector plugin.

13.2.84. `KafkaConnectS2I` schema reference

The type KafkaConnectS2I has been deprecated. Please use Build instead.

Property	Description
spec	The specification of the Kafka Connect Source-to-Image (S2I) cluster.
`KafkaConnectS2ISpec`
status	The status of the Kafka Connect Source-to-Image (S2I) cluster.
`KafkaConnectS2IStatus`

13.2.85. `KafkaConnectS2ISpec` schema reference

Used in: KafkaConnectS2I

Full list of KafkaConnectS2ISpec schema properties

Configures a Kafka Connect cluster with Source-to-Image (S2I) support.

When extending Kafka Connect with connector plugins on OpenShift (only), you can use OpenShift builds and S2I to create a container image that is used by the Kafka Connect deployment.

The configuration options are similar to Kafka Connect configuration using the KafkaConnectSpec schema.

13.2.85.1. `KafkaConnectS2ISpec` schema properties

Property	Description
version	The Kafka Connect version. Defaults to 2.8.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.
string
replicas	The number of pods in the Kafka Connect group.
integer	The number of pods in the Kafka Connect group.
image	The docker image for the pods.
string	The docker image for the pods.
buildResources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
bootstrapServers	Bootstrap servers to connect to. This should be given as a comma separated list of <hostname>:‍<port> pairs.
string
tls	TLS configuration.
`KafkaConnectTls`	TLS configuration.
authentication	Authentication configuration for Kafka Connect. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
config	The Kafka Connect configuration. Properties with the following prefixes cannot be set: ssl., sasl., security., listeners, plugin.path, rest., bootstrap.servers, consumer.interceptor.classes, producer.interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map
resources	The maximum limits for CPU and memory resources and the requested initial resources. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
jmxOptions	JMX Options.
`KafkaJmxOptions`	JMX Options.
logging	Logging configuration for Kafka Connect. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
tracing	The configuration of tracing in Kafka Connect. The type depends on the value of the `tracing.type` property within the given object, which must be one of [jaeger].
`JaegerTracing`
template	Template for Kafka Connect and Kafka Connect S2I resources. The template allows users to specify how the `Deployment`, `Pods` and `Service` are generated.
`KafkaConnectTemplate`
externalConfiguration	Pass data from Secrets or ConfigMaps to the Kafka Connect pods and use them to configure connectors.
`ExternalConfiguration`
build	Configures how the Connect container image should be built. Optional.
`Build`
clientRackInitImage	The image of the init container used for initializing the `client.rack`.
string
insecureSourceRepository	When true this configures the source repository with the 'Local' reference policy and an import policy that accepts insecure source tags.
boolean
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`
rack	Configuration of the node label which will be used as the client.rack consumer configuration.
`Rack`

13.2.86. `KafkaConnectS2IStatus` schema reference

Used in: KafkaConnectS2I

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
url	The URL of the REST API endpoint for managing and monitoring Kafka Connect connectors.
string
connectorPlugins	The list of connector plugins available in this Kafka Connect deployment.
`ConnectorPlugin` array
buildConfigName	The name of the build configuration.
string	The name of the build configuration.
labelSelector	Label selector for pods providing this resource.
string	Label selector for pods providing this resource.
replicas	The current number of pods being used to provide this resource.
integer

13.2.87. `KafkaTopic` schema reference

Property	Description
spec	The specification of the topic.
`KafkaTopicSpec`	The specification of the topic.
status	The status of the topic.
`KafkaTopicStatus`	The status of the topic.

13.2.88. `KafkaTopicSpec` schema reference

Used in: KafkaTopic

Property	Description
partitions	The number of partitions the topic should have. This cannot be decreased after topic creation. It can be increased after topic creation, but it is important to understand the consequences that has, especially for topics with semantic partitioning. When absent this will default to the broker configuration for `num.partitions`.
integer
replicas	The number of replicas the topic should have. When absent this will default to the broker configuration for `default.replication.factor`.
integer
config	The topic configuration.
map	The topic configuration.
topicName	The name of the topic. When absent this will default to the metadata.name of the topic. It is recommended to not set this unless the topic name is not a valid OpenShift resource name.
string

13.2.89. `KafkaTopicStatus` schema reference

Used in: KafkaTopic

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
topicName	Topic name.
string	Topic name.

13.2.90. `KafkaUser` schema reference

Property	Description
spec	The specification of the user.
`KafkaUserSpec`	The specification of the user.
status	The status of the Kafka User.
`KafkaUserStatus`	The status of the Kafka User.

13.2.91. `KafkaUserSpec` schema reference

Used in: KafkaUser

Property	Description
authentication	Authentication mechanism enabled for this Kafka user. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512].
`KafkaUserTlsClientAuthentication`, `KafkaUserScramSha512ClientAuthentication`
authorization	Authorization rules for this Kafka user. The type depends on the value of the `authorization.type` property within the given object, which must be one of [simple].
`KafkaUserAuthorizationSimple`
quotas	Quotas on requests to control the broker resources used by clients. Network bandwidth and request rate quotas can be enforced.Kafka documentation for Kafka User quotas can be found at http://kafka.apache.org/documentation/#design_quotas.
`KafkaUserQuotas`
template	Template to specify how Kafka User `Secrets` are generated.
`KafkaUserTemplate`	Template to specify how Kafka User `Secrets` are generated.

13.2.92. `KafkaUserTlsClientAuthentication` schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserTlsClientAuthentication type from KafkaUserScramSha512ClientAuthentication. It must have the value tls for the type KafkaUserTlsClientAuthentication.

Property	Description
type	Must be `tls`.
string	Must be `tls`.

13.2.93. `KafkaUserScramSha512ClientAuthentication` schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserScramSha512ClientAuthentication type from KafkaUserTlsClientAuthentication. It must have the value scram-sha-512 for the type KafkaUserScramSha512ClientAuthentication.

Property	Description
type	Must be `scram-sha-512`.
string	Must be `scram-sha-512`.

13.2.94. `KafkaUserAuthorizationSimple` schema reference

Used in: KafkaUserSpec

The type property is a discriminator that distinguishes use of the KafkaUserAuthorizationSimple type from other subtypes which may be added in the future. It must have the value simple for the type KafkaUserAuthorizationSimple.

Property	Description
type	Must be `simple`.
string	Must be `simple`.
acls	List of ACL rules which should be applied to this user.
`AclRule` array	List of ACL rules which should be applied to this user.

13.2.95. `AclRule` schema reference

Used in: KafkaUserAuthorizationSimple

Full list of AclRule schema properties

Configures access control rule for a KafkaUser when brokers are using the AclAuthorizer.

Example KafkaUser configuration with authorization

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaUser
metadata:
  name: my-user
  labels:
    strimzi.io/cluster: my-cluster
spec:
  # ...
  authorization:
    type: simple
    acls:
      - resource:
          type: topic
          name: my-topic
          patternType: literal
        operation: Read
      - resource:
          type: topic
          name: my-topic
          patternType: literal
        operation: Describe
      - resource:
          type: group
          name: my-group
          patternType: prefix
        operation: Read

13.2.95.1. `resource`

Use the resource property to specify the resource that the rule applies to.

Simple authorization supports four resource types, which are specified in the type property:

Topics (topic)
Consumer Groups (group)
Clusters (cluster)
Transactional IDs (transactionalId)

For Topic, Group, and Transactional ID resources you can specify the name of the resource the rule applies to in the name property.

Cluster type resources have no name.

A name is specified as a literal or a prefix using the patternType property.

Literal names are taken exactly as they are specified in the name field.
Prefix names use the value from the name as a prefix, and will apply the rule to all resources with names starting with the value.

13.2.95.2. `type`

The type of rule, which is to allow or deny (not currently supported) an operation.

The type field is optional. If type is unspecified, the ACL rule is treated as an allow rule.

13.2.95.3. `operation`

Specify an operation for the rule to allow or deny.

The following operations are supported:

Read
Write
Delete
Alter
Describe
All
IdempotentWrite
ClusterAction
Create
AlterConfigs
DescribeConfigs

Only certain operations work with each resource.

For more details about AclAuthorizer, ACLs and supported combinations of resources and operations, see Authorization and ACLs.

13.2.95.4. `host`

Use the host property to specify a remote host from which the rule is allowed or denied.

Use an asterisk (*) to allow or deny the operation from all hosts. The host field is optional. If host is unspecified, the * value is used by default.

13.2.95.5. `AclRule` schema properties

Property	Description
host	The host from which the action described in the ACL rule is allowed or denied.
string
operation	Operation which will be allowed or denied. Supported operations are: Read, Write, Create, Delete, Alter, Describe, ClusterAction, AlterConfigs, DescribeConfigs, IdempotentWrite and All.
string (one of [Read, Write, Delete, Alter, Describe, All, IdempotentWrite, ClusterAction, Create, AlterConfigs, DescribeConfigs])
resource	Indicates the resource for which given ACL rule applies. The type depends on the value of the `resource.type` property within the given object, which must be one of [topic, group, cluster, transactionalId].
`AclRuleTopicResource`, `AclRuleGroupResource`, `AclRuleClusterResource`, `AclRuleTransactionalIdResource`
type	The type of the rule. Currently the only supported type is `allow`. ACL rules with type `allow` are used to allow user to execute the specified operations. Default value is `allow`.
string (one of [allow, deny])

13.2.96. `AclRuleTopicResource` schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleTopicResource type from AclRuleGroupResource, AclRuleClusterResource, AclRuleTransactionalIdResource. It must have the value topic for the type AclRuleTopicResource.

Property	Description
type	Must be `topic`.
string	Must be `topic`.
name	Name of resource for which given ACL rule applies. Can be combined with `patternType` field to use prefix pattern.
string
patternType	Describes the pattern used in the resource field. The supported types are `literal` and `prefix`. With `literal` pattern type, the resource field will be used as a definition of a full topic name. With `prefix` pattern type, the resource name will be used only as a prefix. Default value is `literal`.
string (one of [prefix, literal])

13.2.97. `AclRuleGroupResource` schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleGroupResource type from AclRuleTopicResource, AclRuleClusterResource, AclRuleTransactionalIdResource. It must have the value group for the type AclRuleGroupResource.

Property	Description
type	Must be `group`.
string	Must be `group`.
name	Name of resource for which given ACL rule applies. Can be combined with `patternType` field to use prefix pattern.
string
patternType	Describes the pattern used in the resource field. The supported types are `literal` and `prefix`. With `literal` pattern type, the resource field will be used as a definition of a full topic name. With `prefix` pattern type, the resource name will be used only as a prefix. Default value is `literal`.
string (one of [prefix, literal])

13.2.98. `AclRuleClusterResource` schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleClusterResource type from AclRuleTopicResource, AclRuleGroupResource, AclRuleTransactionalIdResource. It must have the value cluster for the type AclRuleClusterResource.

Property	Description
type	Must be `cluster`.
string	Must be `cluster`.

13.2.99. `AclRuleTransactionalIdResource` schema reference

Used in: AclRule

The type property is a discriminator that distinguishes use of the AclRuleTransactionalIdResource type from AclRuleTopicResource, AclRuleGroupResource, AclRuleClusterResource. It must have the value transactionalId for the type AclRuleTransactionalIdResource.

Property	Description
type	Must be `transactionalId`.
string	Must be `transactionalId`.
name	Name of resource for which given ACL rule applies. Can be combined with `patternType` field to use prefix pattern.
string
patternType	Describes the pattern used in the resource field. The supported types are `literal` and `prefix`. With `literal` pattern type, the resource field will be used as a definition of a full name. With `prefix` pattern type, the resource name will be used only as a prefix. Default value is `literal`.
string (one of [prefix, literal])

13.2.100. `KafkaUserQuotas` schema reference

Used in: KafkaUserSpec

Full list of KafkaUserQuotas schema properties

Kafka allows a user to set quotas to control the use of resources by clients.

13.2.100.1. `quotas`

You can configure your clients to use the following types of quotas:

Network usage quotas specify the byte rate threshold for each group of clients sharing a quota.
CPU utilization quotas specify a window for broker requests from clients. The window is the percentage of time for clients to make requests. A client makes requests on the I/O threads and network threads of the broker.
Partition mutation quotas limit the number of partition mutations which clients are allowed to make per second.

A partition mutation quota prevents Kafka clusters from being overwhelmed by concurrent topic operations. Partition mutations occur in response to the following types of user requests:

Creating partitions for a new topic
Adding partitions to an existing topic
Deleting partitions from a topic

You can configure a partition mutation quota to control the rate at which mutations are accepted for user requests.

Using quotas for Kafka clients might be useful in a number of situations. Consider a wrongly configured Kafka producer which is sending requests at too high a rate. Such misconfiguration can cause a denial of service to other clients, so the problematic client ought to be blocked. By using a network limiting quota, it is possible to prevent this situation from significantly impacting other clients.

AMQ Streams supports user-level quotas, but not client-level quotas.

Example Kafka user quota configuration

spec:
  quotas:
    producerByteRate: 1048576
    consumerByteRate: 2097152
    requestPercentage: 55
    controllerMutationRate: 10

For more information about Kafka user quotas, refer to the Apache Kafka documentation.

13.2.100.2. `KafkaUserQuotas` schema properties

Property	Description
consumerByteRate	A quota on the maximum bytes per-second that each client group can fetch from a broker before the clients in the group are throttled. Defined on a per-broker basis.
integer
controllerMutationRate	A quota on the rate at which mutations are accepted for the create topics request, the create partitions request and the delete topics request. The rate is accumulated by the number of partitions created or deleted.
number
producerByteRate	A quota on the maximum bytes per-second that each client group can publish to a broker before the clients in the group are throttled. Defined on a per-broker basis.
integer
requestPercentage	A quota on the maximum CPU utilization of each client group as a percentage of network and I/O threads.
integer

13.2.101. `KafkaUserTemplate` schema reference

Used in: KafkaUserSpec

Full list of KafkaUserTemplate schema properties

Specify additional labels and annotations for the secret created by the User Operator.

An example showing the KafkaUserTemplate

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaUser
metadata:
  name: my-user
  labels:
    strimzi.io/cluster: my-cluster
spec:
  authentication:
    type: tls
  template:
    secret:
      metadata:
        labels:
          label1: value1
        annotations:
          anno1: value1
  # ...

13.2.101.1. `KafkaUserTemplate` schema properties

Property	Description
secret	Template for KafkaUser resources. The template allows users to specify how the `Secret` with password or TLS certificates is generated.
`ResourceTemplate`

13.2.102. `KafkaUserStatus` schema reference

Used in: KafkaUser

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
username	Username.
string	Username.
secret	The name of `Secret` where the credentials are stored.
string	The name of `Secret` where the credentials are stored.

13.2.103. `KafkaMirrorMaker` schema reference

Property	Description
spec	The specification of Kafka MirrorMaker.
`KafkaMirrorMakerSpec`	The specification of Kafka MirrorMaker.
status	The status of Kafka MirrorMaker.
`KafkaMirrorMakerStatus`	The status of Kafka MirrorMaker.

13.2.104. `KafkaMirrorMakerSpec` schema reference

Used in: KafkaMirrorMaker

Full list of KafkaMirrorMakerSpec schema properties

Configures Kafka MirrorMaker.

13.2.104.1. `include`

Use the include property to configure a list of topics that Kafka MirrorMaker mirrors from the source to the target Kafka cluster.

The property allows any regular expression from the simplest case with a single topic name to complex patterns. For example, you can mirror topics A and B using "A|B" or all topics using "*". You can also pass multiple regular expressions separated by commas to the Kafka MirrorMaker.

13.2.104.2. `KafkaMirrorMakerConsumerSpec` and `KafkaMirrorMakerProducerSpec`

Use the KafkaMirrorMakerConsumerSpec and KafkaMirrorMakerProducerSpec to configure source (consumer) and target (producer) clusters.

Kafka MirrorMaker always works together with two Kafka clusters (source and target). To establish a connection, the bootstrap servers for the source and the target Kafka clusters are specified as comma-separated lists of HOSTNAME:PORT pairs. Each comma-separated list contains one or more Kafka brokers or a Service pointing to Kafka brokers specified as a HOSTNAME:PORT pair.

13.2.104.3. `logging`

Kafka MirrorMaker has its own configurable logger:

mirrormaker.root.logger

MirrorMaker uses the Apache log4j logger implementation.

Use the logging property to configure loggers and logger levels.

Here we see examples of inline and external logging:

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker
spec:
  # ...
  logging:
    type: inline
    loggers:
      mirrormaker.root.logger: "INFO"
  # ...

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaMirrorMaker
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: mirror-maker-log4j.properties
  # ...

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.104.4. `KafkaMirrorMakerSpec` schema properties

Property	Description
version	The Kafka MirrorMaker version. Defaults to 2.8.0. Consult the documentation to understand the process required to upgrade or downgrade the version.
string
replicas	The number of pods in the `Deployment`.
integer	The number of pods in the `Deployment`.
image	The docker image for the pods.
string	The docker image for the pods.
consumer	Configuration of source cluster.
`KafkaMirrorMakerConsumerSpec`	Configuration of source cluster.
producer	Configuration of target cluster.
`KafkaMirrorMakerProducerSpec`	Configuration of target cluster.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
whitelist	The `whitelist` property has been deprecated, and should now be configured using `spec.include`. List of topics which are included for mirroring. This option allows any regular expression using Java-style regular expressions. Mirroring two topics named A and B is achieved by using the expression `'A\|B'`. Or, as a special case, you can mirror all topics using the regular expression '*'. You can also specify multiple regular expressions separated by commas.
string
include	List of topics which are included for mirroring. This option allows any regular expression using Java-style regular expressions. Mirroring two topics named A and B is achieved by using the expression `'A\|B'`. Or, as a special case, you can mirror all topics using the regular expression '*'. You can also specify multiple regular expressions separated by commas.
string
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
logging	Logging configuration for MirrorMaker. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`
tracing	The configuration of tracing in Kafka MirrorMaker. The type depends on the value of the `tracing.type` property within the given object, which must be one of [jaeger].
`JaegerTracing`
template	Template to specify how Kafka MirrorMaker resources, `Deployments` and `Pods`, are generated.
`KafkaMirrorMakerTemplate`
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.

13.2.105. `KafkaMirrorMakerConsumerSpec` schema reference

Used in: KafkaMirrorMakerSpec

Full list of KafkaMirrorMakerConsumerSpec schema properties

Configures a MirrorMaker consumer.

13.2.105.1. `numStreams`

Use the consumer.numStreams property to configure the number of streams for the consumer.

You can increase the throughput in mirroring topics by increasing the number of consumer threads. Consumer threads belong to the consumer group specified for Kafka MirrorMaker. Topic partitions are assigned across the consumer threads, which consume messages in parallel.

13.2.105.2. `offsetCommitInterval`

Use the consumer.offsetCommitInterval property to configure an offset auto-commit interval for the consumer.

You can specify the regular time interval at which an offset is committed after Kafka MirrorMaker has consumed data from the source Kafka cluster. The time interval is set in milliseconds, with a default value of 60,000.

13.2.105.3. `config`

Use the consumer.config properties to configure Kafka options for the consumer.

The config property contains the Kafka MirrorMaker consumer configuration options as keys, with values set in one of the following JSON types:

String
Number
Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for consumers.

However, there are exceptions for options automatically configured and managed directly by AMQ Streams related to:

Kafka cluster bootstrap address
Security (encryption, authentication, and authorization)
Consumer group identifier
Interceptors

Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

bootstrap.servers
group.id
interceptor.classes
ssl. (not including specific exceptions)
sasl.
security.

When a forbidden option is present in the config property, it is ignored and a warning message is printed to the Cluster Operator log file. All other options are passed to Kafka MirrorMaker.

Important

The Cluster Operator does not validate keys or values in the provided config object. When an invalid configuration is provided, the Kafka MirrorMaker might not start or might become unstable. In such cases, the configuration in the KafkaMirrorMaker.spec.consumer.config object should be fixed and the Cluster Operator will roll out the new configuration for Kafka MirrorMaker.

13.2.105.4. `groupId`

Use the consumer.groupId property to configure a consumer group identifier for the consumer.

Kafka MirrorMaker uses a Kafka consumer to consume messages, behaving like any other Kafka consumer client. Messages consumed from the source Kafka cluster are mirrored to a target Kafka cluster. A group identifier is required, as the consumer needs to be part of a consumer group for the assignment of partitions.

13.2.105.5. `KafkaMirrorMakerConsumerSpec` schema properties

Property	Description
numStreams	Specifies the number of consumer stream threads to create.
integer	Specifies the number of consumer stream threads to create.
offsetCommitInterval	Specifies the offset auto-commit interval in ms. Default value is 60000.
integer
bootstrapServers	A list of host:port pairs for establishing the initial connection to the Kafka cluster.
string
groupId	A unique string that identifies the consumer group this consumer belongs to.
string
authentication	Authentication configuration for connecting to the cluster. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
config	The MirrorMaker consumer config. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, group.id, sasl., security., interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map
tls	TLS configuration for connecting MirrorMaker to the cluster.
`KafkaMirrorMakerTls`

13.2.106. `KafkaMirrorMakerTls` schema reference

Used in: KafkaMirrorMakerConsumerSpec, KafkaMirrorMakerProducerSpec

Full list of KafkaMirrorMakerTls schema properties

Configures TLS trusted certificates for connecting MirrorMaker to the cluster.

13.2.106.1. `trustedCertificates`

Provide a list of secrets using the trustedCertificates property.

13.2.106.2. `KafkaMirrorMakerTls` schema properties

Property	Description
trustedCertificates	Trusted certificates for TLS connection.
`CertSecretSource` array	Trusted certificates for TLS connection.

13.2.107. `KafkaMirrorMakerProducerSpec` schema reference

Used in: KafkaMirrorMakerSpec

Full list of KafkaMirrorMakerProducerSpec schema properties

Configures a MirrorMaker producer.

13.2.107.1. `abortOnSendFailure`

Use the producer.abortOnSendFailure property to configure how to handle message send failure from the producer.

By default, if an error occurs when sending a message from Kafka MirrorMaker to a Kafka cluster:

The Kafka MirrorMaker container is terminated in OpenShift.
The container is then recreated.

If the abortOnSendFailure option is set to false, message sending errors are ignored.

13.2.107.2. `config`

Use the producer.config properties to configure Kafka options for the producer.

The config property contains the Kafka MirrorMaker producer configuration options as keys, with values set in one of the following JSON types:

String
Number
Boolean

Exceptions

You can specify and configure the options listed in the Apache Kafka configuration documentation for producers.

However, there are exceptions for options automatically configured and managed directly by AMQ Streams related to:

Kafka cluster bootstrap address
Security (encryption, authentication, and authorization)
Interceptors

Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

bootstrap.servers
interceptor.classes
ssl. (not including specific exceptions)
sasl.
security.

When a forbidden option is present in the config property, it is ignored and a warning message is printed to the Cluster Operator log file. All other options are passed to Kafka MirrorMaker.

Important

The Cluster Operator does not validate keys or values in the provided config object. When an invalid configuration is provided, the Kafka MirrorMaker might not start or might become unstable. In such cases, the configuration in the KafkaMirrorMaker.spec.producer.config object should be fixed and the Cluster Operator will roll out the new configuration for Kafka MirrorMaker.

13.2.107.3. `KafkaMirrorMakerProducerSpec` schema properties

Property	Description
bootstrapServers	A list of host:port pairs for establishing the initial connection to the Kafka cluster.
string
abortOnSendFailure	Flag to set the MirrorMaker to exit on a failed send. Default value is `true`.
boolean
authentication	Authentication configuration for connecting to the cluster. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
config	The MirrorMaker producer config. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, sasl., security., interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map
tls	TLS configuration for connecting MirrorMaker to the cluster.
`KafkaMirrorMakerTls`

13.2.108. `KafkaMirrorMakerTemplate` schema reference

Used in: KafkaMirrorMakerSpec

Property	Description
deployment	Template for Kafka MirrorMaker `Deployment`.
`DeploymentTemplate`	Template for Kafka MirrorMaker `Deployment`.
pod	Template for Kafka MirrorMaker `Pods`.
`PodTemplate`	Template for Kafka MirrorMaker `Pods`.
podDisruptionBudget	Template for Kafka MirrorMaker `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for Kafka MirrorMaker `PodDisruptionBudget`.
mirrorMakerContainer	Template for Kafka MirrorMaker container.
`ContainerTemplate`	Template for Kafka MirrorMaker container.
serviceAccount	Template for the Kafka MirrorMaker service account.
`ResourceTemplate`	Template for the Kafka MirrorMaker service account.

13.2.109. `KafkaMirrorMakerStatus` schema reference

Used in: KafkaMirrorMaker

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
labelSelector	Label selector for pods providing this resource.
string	Label selector for pods providing this resource.
replicas	The current number of pods being used to provide this resource.
integer

13.2.110. `KafkaBridge` schema reference

Property	Description
spec	The specification of the Kafka Bridge.
`KafkaBridgeSpec`	The specification of the Kafka Bridge.
status	The status of the Kafka Bridge.
`KafkaBridgeStatus`	The status of the Kafka Bridge.

13.2.111. `KafkaBridgeSpec` schema reference

Used in: KafkaBridge

Full list of KafkaBridgeSpec schema properties

Configures a Kafka Bridge cluster.

Configuration options relate to:

Kafka cluster bootstrap address
Security (Encryption, Authentication, and Authorization)
Consumer configuration
Producer configuration
HTTP configuration

13.2.111.1. `logging`

Kafka Bridge has its own configurable loggers:

logger.bridge
logger.<operation-id>

You can replace <operation-id> in the logger.<operation-id> logger to set log levels for specific operations:

createConsumer
deleteConsumer
subscribe
unsubscribe
poll
assign
commit
send
sendToPartition
seekToBeginning
seekToEnd
seek
healthy
ready
openapi

Each operation is defined according OpenAPI specification, and has a corresponding API endpoint through which the bridge receives requests from HTTP clients. You can change the log level on each endpoint to create fine-grained logging information about the incoming and outgoing HTTP requests.

Each logger has to be configured assigning it a name as http.openapi.operation.<operation-id>. For example, configuring the logging level for the send operation logger means defining the following:

logger.send.name = http.openapi.operation.send
logger.send.level = DEBUG

Kafka Bridge uses the Apache log4j2 logger implementation. Loggers are defined in the log4j2.properties file, which has the following default configuration for healthy and ready endpoints:

logger.healthy.name = http.openapi.operation.healthy
logger.healthy.level = WARN
logger.ready.name = http.openapi.operation.ready
logger.ready.level = WARN

The log level of all other operations is set to INFO by default.

Use the logging property to configure loggers and logger levels.

Here we see examples of inline and external logging.

Inline logging

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
spec:
  # ...
  logging:
    type: inline
    loggers:
      logger.bridge.level: "INFO"
      # enabling DEBUG just for send operation
      logger.send.name: "http.openapi.operation.send"
      logger.send.level: "DEBUG"
  # ...

External logging

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
spec:
  # ...
  logging:
    type: external
    valueFrom:
      configMapKeyRef:
        name: customConfigMap
        key: bridge-logj42.properties
  # ...

Any available loggers that are not configured have their level set to OFF.

If the Kafka Bridge was deployed using the Cluster Operator, changes to Kafka Bridge logging levels are applied dynamically.

If you use external logging, a rolling update is triggered when logging appenders are changed.

Garbage collector (GC)

Garbage collector logging can also be enabled (or disabled) using the jvmOptions property.

13.2.111.2. `KafkaBridgeSpec` schema properties

Property	Description
replicas	The number of pods in the `Deployment`.
integer	The number of pods in the `Deployment`.
image	The docker image for the pods.
string	The docker image for the pods.
bootstrapServers	A list of host:port pairs for establishing the initial connection to the Kafka cluster.
string
tls	TLS configuration for connecting Kafka Bridge to the cluster.
`KafkaBridgeTls`
authentication	Authentication configuration for connecting to the cluster. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
http	The HTTP related configuration.
`KafkaBridgeHttpConfig`	The HTTP related configuration.
adminClient	Kafka AdminClient related configuration.
`KafkaBridgeAdminClientSpec`	Kafka AdminClient related configuration.
consumer	Kafka consumer related configuration.
`KafkaBridgeConsumerSpec`	Kafka consumer related configuration.
producer	Kafka producer related configuration.
`KafkaBridgeProducerSpec`	Kafka producer related configuration.
resources	CPU and memory resources to reserve. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
jvmOptions	Currently not supported JVM Options for pods.
`JvmOptions`	Currently not supported JVM Options for pods.
logging	Logging configuration for Kafka Bridge. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
enableMetrics	Enable the metrics for the Kafka Bridge. Default is false.
boolean	Enable the metrics for the Kafka Bridge. Default is false.
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
template	Template for Kafka Bridge resources. The template allows users to specify how is the `Deployment` and `Pods` generated.
`KafkaBridgeTemplate`
tracing	The configuration of tracing in Kafka Bridge. The type depends on the value of the `tracing.type` property within the given object, which must be one of [jaeger].
`JaegerTracing`

13.2.112. `KafkaBridgeTls` schema reference

Used in: KafkaBridgeSpec

Property	Description
trustedCertificates	Trusted certificates for TLS connection.
`CertSecretSource` array	Trusted certificates for TLS connection.

13.2.113. `KafkaBridgeHttpConfig` schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeHttpConfig schema properties

Configures HTTP access to a Kafka cluster for the Kafka Bridge.

The default HTTP configuration is for the Kafka Bridge to listen on port 8080.

13.2.113.1. `cors`

As well as enabling HTTP access to a Kafka cluster, HTTP properties provide the capability to enable and define access control for the Kafka Bridge through Cross-Origin Resource Sharing (CORS). CORS is a HTTP mechanism that allows browser access to selected resources from more than one origin. To configure CORS, you define a list of allowed resource origins and HTTP access methods. For the origins, you can use a URL or a Java regular expression.

Example Kafka Bridge HTTP configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  http:
    port: 8080
    cors:
      allowedOrigins: "https://strimzi.io"
      allowedMethods: "GET,POST,PUT,DELETE,OPTIONS,PATCH"
  # ...

13.2.113.2. `KafkaBridgeHttpConfig` schema properties

Property	Description
port	The port which is the server listening on.
integer	The port which is the server listening on.
cors	CORS configuration for the HTTP Bridge.
`KafkaBridgeHttpCors`	CORS configuration for the HTTP Bridge.

13.2.114. `KafkaBridgeHttpCors` schema reference

Used in: KafkaBridgeHttpConfig

Property	Description
allowedOrigins	List of allowed origins. Java regular expressions can be used.
string array
allowedMethods	List of allowed HTTP methods.
string array	List of allowed HTTP methods.

13.2.115. `KafkaBridgeAdminClientSpec` schema reference

Used in: KafkaBridgeSpec

Property	Description
config	The Kafka AdminClient configuration used for AdminClient instances created by the bridge.
map

13.2.116. `KafkaBridgeConsumerSpec` schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeConsumerSpec schema properties

Configures consumer options for the Kafka Bridge as keys.

The values can be one of the following JSON types:

String
Number
Boolean

You can specify and configure the options listed in the Apache Kafka configuration documentation for consumers with the exception of those options which are managed directly by AMQ Streams. Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

ssl.
sasl.
security.
bootstrap.servers
group.id

When one of the forbidden options is present in the config property, it is ignored and a warning message will be printed to the Cluster Operator log file. All other options will be passed to Kafka

Important

The Cluster Operator does not validate keys or values in the config object. If an invalid configuration is provided, the Kafka Bridge cluster might not start or might become unstable. Fix the configuration so that the Cluster Operator can roll out the new configuration to all Kafka Bridge nodes.

There are exceptions to the forbidden options. For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties.

Example Kafka Bridge consumer configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  consumer:
    config:
      auto.offset.reset: earliest
      enable.auto.commit: true
      ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"
      ssl.enabled.protocols: "TLSv1.2"
      ssl.protocol: "TLSv1.2"
      ssl.endpoint.identification.algorithm: HTTPS
    # ...

13.2.116.1. `KafkaBridgeConsumerSpec` schema properties

Property	Description
config	The Kafka consumer configuration used for consumer instances created by the bridge. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, group.id, sasl., security. (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map

13.2.117. `KafkaBridgeProducerSpec` schema reference

Used in: KafkaBridgeSpec

Full list of KafkaBridgeProducerSpec schema properties

Configures producer options for the Kafka Bridge as keys.

The values can be one of the following JSON types:

String
Number
Boolean

You can specify and configure the options listed in the Apache Kafka configuration documentation for producers with the exception of those options which are managed directly by AMQ Streams. Specifically, all configuration options with keys equal to or starting with one of the following strings are forbidden:

ssl.
sasl.
security.
bootstrap.servers

When one of the forbidden options is present in the config property, it is ignored and a warning message will be printed to the Cluster Operator log file. All other options will be passed to Kafka

Important

There are exceptions to the forbidden options. For client connection using a specific cipher suite for a TLS version, you can configure allowed ssl properties.

Example Kafka Bridge producer configuration

apiVersion: kafka.strimzi.io/v1beta2
kind: KafkaBridge
metadata:
  name: my-bridge
spec:
  # ...
  producer:
    config:
      acks: 1
      delivery.timeout.ms: 300000
      ssl.cipher.suites: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"
      ssl.enabled.protocols: "TLSv1.2"
      ssl.protocol: "TLSv1.2"
      ssl.endpoint.identification.algorithm: HTTPS
    # ...

13.2.117.1. `KafkaBridgeProducerSpec` schema properties

Property	Description
config	The Kafka producer configuration used for producer instances created by the bridge. Properties with the following prefixes cannot be set: ssl., bootstrap.servers, sasl., security. (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map

13.2.118. `KafkaBridgeTemplate` schema reference

Used in: KafkaBridgeSpec

Property	Description
deployment	Template for Kafka Bridge `Deployment`.
`DeploymentTemplate`	Template for Kafka Bridge `Deployment`.
pod	Template for Kafka Bridge `Pods`.
`PodTemplate`	Template for Kafka Bridge `Pods`.
apiService	Template for Kafka Bridge API `Service`.
`InternalServiceTemplate`	Template for Kafka Bridge API `Service`.
podDisruptionBudget	Template for Kafka Bridge `PodDisruptionBudget`.
`PodDisruptionBudgetTemplate`	Template for Kafka Bridge `PodDisruptionBudget`.
bridgeContainer	Template for the Kafka Bridge container.
`ContainerTemplate`	Template for the Kafka Bridge container.
serviceAccount	Template for the Kafka Bridge service account.
`ResourceTemplate`	Template for the Kafka Bridge service account.

13.2.119. `KafkaBridgeStatus` schema reference

Used in: KafkaBridge

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
url	The URL at which external client applications can access the Kafka Bridge.
string
labelSelector	Label selector for pods providing this resource.
string	Label selector for pods providing this resource.
replicas	The current number of pods being used to provide this resource.
integer

13.2.120. `KafkaConnector` schema reference

Property	Description
spec	The specification of the Kafka Connector.
`KafkaConnectorSpec`	The specification of the Kafka Connector.
status	The status of the Kafka Connector.
`KafkaConnectorStatus`	The status of the Kafka Connector.

13.2.121. `KafkaConnectorSpec` schema reference

Used in: KafkaConnector

Property	Description
class	The Class for the Kafka Connector.
string	The Class for the Kafka Connector.
tasksMax	The maximum number of tasks for the Kafka Connector.
integer	The maximum number of tasks for the Kafka Connector.
config	The Kafka Connector configuration. The following properties cannot be set: connector.class, tasks.max.
map
pause	Whether the connector should be paused. Defaults to false.
boolean	Whether the connector should be paused. Defaults to false.

13.2.122. `KafkaConnectorStatus` schema reference

Used in: KafkaConnector

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
connectorStatus	The connector status, as reported by the Kafka Connect REST API.
map
tasksMax	The maximum number of tasks for the Kafka Connector.
integer	The maximum number of tasks for the Kafka Connector.
topics	The list of topics used by the Kafka Connector.
string array	The list of topics used by the Kafka Connector.

13.2.123. `KafkaMirrorMaker2` schema reference

Property	Description
spec	The specification of the Kafka MirrorMaker 2.0 cluster.
`KafkaMirrorMaker2Spec`	The specification of the Kafka MirrorMaker 2.0 cluster.
status	The status of the Kafka MirrorMaker 2.0 cluster.
`KafkaMirrorMaker2Status`	The status of the Kafka MirrorMaker 2.0 cluster.

13.2.124. `KafkaMirrorMaker2Spec` schema reference

Used in: KafkaMirrorMaker2

Property	Description
version	The Kafka Connect version. Defaults to 2.8.0. Consult the user documentation to understand the process required to upgrade or downgrade the version.
string
replicas	The number of pods in the Kafka Connect group.
integer	The number of pods in the Kafka Connect group.
image	The docker image for the pods.
string	The docker image for the pods.
connectCluster	The cluster alias used for Kafka Connect. The alias must match a cluster in the list at `spec.clusters`.
string
clusters	Kafka clusters for mirroring.
`KafkaMirrorMaker2ClusterSpec` array	Kafka clusters for mirroring.
mirrors	Configuration of the MirrorMaker 2.0 connectors.
`KafkaMirrorMaker2MirrorSpec` array	Configuration of the MirrorMaker 2.0 connectors.
resources	The maximum limits for CPU and memory resources and the requested initial resources. For more information, see the external documentation for core/v1 resourcerequirements.
ResourceRequirements
livenessProbe	Pod liveness checking.
`Probe`	Pod liveness checking.
readinessProbe	Pod readiness checking.
`Probe`	Pod readiness checking.
jvmOptions	JVM Options for pods.
`JvmOptions`	JVM Options for pods.
jmxOptions	JMX Options.
`KafkaJmxOptions`	JMX Options.
logging	Logging configuration for Kafka Connect. The type depends on the value of the `logging.type` property within the given object, which must be one of [inline, external].
`InlineLogging`, `ExternalLogging`
tracing	The configuration of tracing in Kafka Connect. The type depends on the value of the `tracing.type` property within the given object, which must be one of [jaeger].
`JaegerTracing`
template	Template for Kafka Connect and Kafka Connect S2I resources. The template allows users to specify how the `Deployment`, `Pods` and `Service` are generated.
`KafkaConnectTemplate`
externalConfiguration	Pass data from Secrets or ConfigMaps to the Kafka Connect pods and use them to configure connectors.
`ExternalConfiguration`
metricsConfig	Metrics configuration. The type depends on the value of the `metricsConfig.type` property within the given object, which must be one of [jmxPrometheusExporter].
`JmxPrometheusExporterMetrics`

13.2.125. `KafkaMirrorMaker2ClusterSpec` schema reference

Used in: KafkaMirrorMaker2Spec

Full list of KafkaMirrorMaker2ClusterSpec schema properties

Configures Kafka clusters for mirroring.

13.2.125.1. `config`

Use the config properties to configure Kafka options.

Standard Apache Kafka configuration may be provided, restricted to those properties not managed directly by AMQ Streams.

13.2.125.2. `KafkaMirrorMaker2ClusterSpec` schema properties

Property	Description
alias	Alias used to reference the Kafka cluster.
string	Alias used to reference the Kafka cluster.
bootstrapServers	A comma-separated list of `host:port` pairs for establishing the connection to the Kafka cluster.
string
tls	TLS configuration for connecting MirrorMaker 2.0 connectors to a cluster.
`KafkaMirrorMaker2Tls`
authentication	Authentication configuration for connecting to the cluster. The type depends on the value of the `authentication.type` property within the given object, which must be one of [tls, scram-sha-512, plain, oauth].
`KafkaClientAuthenticationTls`, `KafkaClientAuthenticationScramSha512`, `KafkaClientAuthenticationPlain`, `KafkaClientAuthenticationOAuth`
config	The MirrorMaker 2.0 cluster config. Properties with the following prefixes cannot be set: ssl., sasl., security., listeners, plugin.path, rest., bootstrap.servers, consumer.interceptor.classes, producer.interceptor.classes (with the exception of: ssl.endpoint.identification.algorithm, ssl.cipher.suites, ssl.protocol, ssl.enabled.protocols).
map

13.2.126. `KafkaMirrorMaker2Tls` schema reference

Used in: KafkaMirrorMaker2ClusterSpec

Property	Description
trustedCertificates	Trusted certificates for TLS connection.
`CertSecretSource` array	Trusted certificates for TLS connection.

13.2.127. `KafkaMirrorMaker2MirrorSpec` schema reference

Used in: KafkaMirrorMaker2Spec

Property	Description
sourceCluster	The alias of the source cluster used by the Kafka MirrorMaker 2.0 connectors. The alias must match a cluster in the list at `spec.clusters`.
string
targetCluster	The alias of the target cluster used by the Kafka MirrorMaker 2.0 connectors. The alias must match a cluster in the list at `spec.clusters`.
string
sourceConnector	The specification of the Kafka MirrorMaker 2.0 source connector.
`KafkaMirrorMaker2ConnectorSpec`
heartbeatConnector	The specification of the Kafka MirrorMaker 2.0 heartbeat connector.
`KafkaMirrorMaker2ConnectorSpec`
checkpointConnector	The specification of the Kafka MirrorMaker 2.0 checkpoint connector.
`KafkaMirrorMaker2ConnectorSpec`
topicsPattern	A regular expression matching the topics to be mirrored, for example, "topic1\|topic2\|topic3". Comma-separated lists are also supported.
string
topicsBlacklistPattern	The `topicsBlacklistPattern` property has been deprecated, and should now be configured using `.spec.mirrors.topicsExcludePattern`. A regular expression matching the topics to exclude from mirroring. Comma-separated lists are also supported.
string
topicsExcludePattern	A regular expression matching the topics to exclude from mirroring. Comma-separated lists are also supported.
string
groupsPattern	A regular expression matching the consumer groups to be mirrored. Comma-separated lists are also supported.
string
groupsBlacklistPattern	The `groupsBlacklistPattern` property has been deprecated, and should now be configured using `.spec.mirrors.groupsExcludePattern`. A regular expression matching the consumer groups to exclude from mirroring. Comma-separated lists are also supported.
string
groupsExcludePattern	A regular expression matching the consumer groups to exclude from mirroring. Comma-separated lists are also supported.
string

13.2.128. `KafkaMirrorMaker2ConnectorSpec` schema reference

Used in: KafkaMirrorMaker2MirrorSpec

Property	Description
tasksMax	The maximum number of tasks for the Kafka Connector.
integer	The maximum number of tasks for the Kafka Connector.
config	The Kafka Connector configuration. The following properties cannot be set: connector.class, tasks.max.
map
pause	Whether the connector should be paused. Defaults to false.
boolean	Whether the connector should be paused. Defaults to false.

13.2.129. `KafkaMirrorMaker2Status` schema reference

Used in: KafkaMirrorMaker2

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
url	The URL of the REST API endpoint for managing and monitoring Kafka Connect connectors.
string
connectorPlugins	The list of connector plugins available in this Kafka Connect deployment.
`ConnectorPlugin` array
connectors	List of MirrorMaker 2.0 connector statuses, as reported by the Kafka Connect REST API.
map array
labelSelector	Label selector for pods providing this resource.
string	Label selector for pods providing this resource.
replicas	The current number of pods being used to provide this resource.
integer

13.2.130. `KafkaRebalance` schema reference

Property	Description
spec	The specification of the Kafka rebalance.
`KafkaRebalanceSpec`	The specification of the Kafka rebalance.
status	The status of the Kafka rebalance.
`KafkaRebalanceStatus`	The status of the Kafka rebalance.

13.2.131. `KafkaRebalanceSpec` schema reference

Used in: KafkaRebalance

Property	Description
goals	A list of goals, ordered by decreasing priority, to use for generating and executing the rebalance proposal. The supported goals are available at https://github.com/linkedin/cruise-control#goals. If an empty goals list is provided, the goals declared in the default.goals Cruise Control configuration parameter are used.
string array
skipHardGoalCheck	Whether to allow the hard goals specified in the Kafka CR to be skipped in optimization proposal generation. This can be useful when some of those hard goals are preventing a balance solution being found. Default is false.
boolean
excludedTopics	A regular expression where any matching topics will be excluded from the calculation of optimization proposals. This expression will be parsed by the java.util.regex.Pattern class; for more information on the supported formar consult the documentation for that class.
string
concurrentPartitionMovementsPerBroker	The upper bound of ongoing partition replica movements going into/out of each broker. Default is 5.
integer
concurrentIntraBrokerPartitionMovements	The upper bound of ongoing partition replica movements between disks within each broker. Default is 2.
integer
concurrentLeaderMovements	The upper bound of ongoing partition leadership movements. Default is 1000.
integer
replicationThrottle	The upper bound, in bytes per second, on the bandwidth used to move replicas. There is no limit by default.
integer
replicaMovementStrategies	A list of strategy class names used to determine the execution order for the replica movements in the generated optimization proposal. By default BaseReplicaMovementStrategy is used, which will execute the replica movements in the order that they were generated.
string array

13.2.132. `KafkaRebalanceStatus` schema reference

Used in: KafkaRebalance

Property	Description
conditions	List of status conditions.
`Condition` array	List of status conditions.
observedGeneration	The generation of the CRD that was last reconciled by the operator.
integer
sessionId	The session identifier for requests to Cruise Control pertaining to this KafkaRebalance resource. This is used by the Kafka Rebalance operator to track the status of ongoing rebalancing operations.
string
optimizationResult	A JSON object describing the optimization result.
map	A JSON object describing the optimization result.

Este conteúdo não está disponível no idioma selecionado.

Chapter 13. Custom resource API reference

13.1. Common configuration properties

13.1.1. replicas

13.1.2. bootstrapServers

13.1.3. ssl

13.1.4. trustedCertificates

13.1.5. resources

13.1.6. image

13.1.7. livenessProbe and readinessProbe healthchecks

13.1.8. metricsConfig

13.1.9. jvmOptions

13.1.10. Garbage collector logging

13.2. Schema properties

13.2.1. Kafka schema reference

13.2.2. KafkaSpec schema reference

13.2.3. KafkaClusterSpec schema reference

13.2.3.1. listeners

13.2.3.2. config

13.2.3.3. brokerRackInitImage

13.2.3.4. logging

13.2.3.5. KafkaClusterSpec schema properties

13.2.4. GenericKafkaListener schema reference

13.2.4.1. listeners

13.2.4.2. type

13.2.4.3. port

13.2.4.4. tls

13.2.4.5. authentication

13.2.4.6. networkPolicyPeers

13.2.4.7. GenericKafkaListener schema properties

13.2.5. KafkaListenerAuthenticationTls schema reference

13.2.6. KafkaListenerAuthenticationScramSha512 schema reference

13.2.7. KafkaListenerAuthenticationOAuth schema reference

13.2.8. GenericSecretSource schema reference

13.2.9. CertSecretSource schema reference

13.2.10. GenericKafkaListenerConfiguration schema reference

13.2.10.1. brokerCertChainAndKey

13.2.10.2. externalTrafficPolicy

13.2.10.3. loadBalancerSourceRanges

13.2.10.4. class

13.2.10.5. preferredNodePortAddressType

13.2.10.6. useServiceDnsDomain

13.2.10.7. GenericKafkaListenerConfiguration schema properties

13.2.11. CertAndKeySecretSource schema reference

13.2.12. GenericKafkaListenerConfigurationBootstrap schema reference

13.2.12.1. alternativeNames

13.2.12.2. host

13.2.12.3. nodePort

13.2.12.4. loadBalancerIP

13.2.12.5. annotations

13.2.12.6. GenericKafkaListenerConfigurationBootstrap schema properties

13.2.13. GenericKafkaListenerConfigurationBroker schema reference

13.2.13.1. GenericKafkaListenerConfigurationBroker schema properties

13.2.14. EphemeralStorage schema reference

13.2.15. PersistentClaimStorage schema reference

13.2.16. PersistentClaimStorageOverride schema reference

13.2.17. JbodStorage schema reference

13.2.18. KafkaAuthorizationSimple schema reference

13.2.18.1. superUsers

13.2.18.2. KafkaAuthorizationSimple schema properties

13.2.19. KafkaAuthorizationOpa schema reference

13.2.19.1. url

13.2.19.2. allowOnError

13.2.19.3. initialCacheCapacity

13.2.19.4. maximumCacheSize

13.2.19.5. expireAfterMs

13.2.19.6. superUsers

13.2.19.7. KafkaAuthorizationOpa schema properties

13.2.20. KafkaAuthorizationKeycloak schema reference

13.2.21. KafkaAuthorizationCustom schema reference

13.2.21.1. authorizerClass

13.2.21.2. superUsers

13.2.21.3. KafkaAuthorizationCustom schema properties

13.2.22. Rack schema reference

13.2.22.1. Spreading partition replicas across racks

13.2.22.2. Consuming messages from the closest replicas

13.2.22.3. Rack schema properties

13.2.23. Probe schema reference

13.2.24. JvmOptions schema reference

13.2.25. SystemProperty schema reference

13.1.1. `replicas`

13.1.2. `bootstrapServers`

13.1.3. `ssl`

13.1.4. `trustedCertificates`

13.1.5. `resources`

13.1.6. `image`

13.1.7. `livenessProbe` and `readinessProbe` healthchecks

13.1.8. `metricsConfig`

13.1.9. `jvmOptions`

13.2.1. `Kafka` schema reference

13.2.2. `KafkaSpec` schema reference

13.2.3. `KafkaClusterSpec` schema reference

13.2.3.1. `listeners`

13.2.3.2. `config`

13.2.3.3. `brokerRackInitImage`

13.2.3.4. `logging`

13.2.3.5. `KafkaClusterSpec` schema properties

13.2.4. `GenericKafkaListener` schema reference

13.2.4.1. `listeners`

13.2.4.2. `type`

13.2.4.3. `port`

13.2.4.4. `tls`

13.2.4.5. `authentication`

13.2.4.6. `networkPolicyPeers`

13.2.4.7. `GenericKafkaListener` schema properties

13.2.5. `KafkaListenerAuthenticationTls` schema reference

13.2.6. `KafkaListenerAuthenticationScramSha512` schema reference

13.2.7. `KafkaListenerAuthenticationOAuth` schema reference

13.2.8. `GenericSecretSource` schema reference

13.2.9. `CertSecretSource` schema reference

13.2.10. `GenericKafkaListenerConfiguration` schema reference

13.2.10.1. `brokerCertChainAndKey`

13.2.10.2. `externalTrafficPolicy`

13.2.10.3. `loadBalancerSourceRanges`

13.2.10.4. `class`

13.2.10.5. `preferredNodePortAddressType`

13.2.10.6. `useServiceDnsDomain`

13.2.10.7. `GenericKafkaListenerConfiguration` schema properties

13.2.11. `CertAndKeySecretSource` schema reference

13.2.12. `GenericKafkaListenerConfigurationBootstrap` schema reference

13.2.12.1. `alternativeNames`

13.2.12.2. `host`

13.2.12.3. `nodePort`

13.2.12.4. `loadBalancerIP`

13.2.12.5. `annotations`

13.2.12.6. `GenericKafkaListenerConfigurationBootstrap` schema properties

13.2.13. `GenericKafkaListenerConfigurationBroker` schema reference

13.2.13.1. `GenericKafkaListenerConfigurationBroker` schema properties

13.2.14. `EphemeralStorage` schema reference

13.2.15. `PersistentClaimStorage` schema reference

13.2.16. `PersistentClaimStorageOverride` schema reference

13.2.17. `JbodStorage` schema reference

13.2.18. `KafkaAuthorizationSimple` schema reference

13.2.18.1. `superUsers`

13.2.18.2. `KafkaAuthorizationSimple` schema properties

13.2.19. `KafkaAuthorizationOpa` schema reference

13.2.19.1. `url`

13.2.19.2. `allowOnError`

13.2.19.3. `initialCacheCapacity`

13.2.19.4. `maximumCacheSize`

13.2.19.5. `expireAfterMs`

13.2.19.6. `superUsers`

13.2.19.7. `KafkaAuthorizationOpa` schema properties

13.2.20. `KafkaAuthorizationKeycloak` schema reference

13.2.21. `KafkaAuthorizationCustom` schema reference

13.2.21.1. `authorizerClass`

13.2.21.2. `superUsers`

13.2.21.3. `KafkaAuthorizationCustom` schema properties

13.2.22. `Rack` schema reference

13.2.22.3. `Rack` schema properties

13.2.23. `Probe` schema reference

13.2.24. `JvmOptions` schema reference

13.2.25. `SystemProperty` schema reference

13.2.26. `KafkaJmxOptions` schema reference

13.2.26.1. `KafkaJmxOptions` schema properties

13.2.27. `KafkaJmxAuthenticationPassword` schema reference

13.2.28. `JmxPrometheusExporterMetrics` schema reference

13.2.29. `ExternalConfigurationReference` schema reference

13.2.30. `InlineLogging` schema reference

13.2.31. `ExternalLogging` schema reference