Este conteúdo não está disponível no idioma selecionado.

Chapter 13. Using Kerberos (GSSAPI) authentication

AMQ Streams supports the use of the Kerberos (GSSAPI) authentication protocol for secure single sign-on access to your Kafka cluster. GSSAPI is an API wrapper for Kerberos functionality, insulating applications from underlying implementation changes.

Kerberos is a network authentication system that allows clients and servers to authenticate to each other by using symmetric encryption and a trusted third party, the Kerberos Key Distribution Centre (KDC).

13.1. Setting up AMQ Streams to use Kerberos (GSSAPI) authentication

This procedure shows how to configure AMQ Streams so that Kafka clients can access Kafka and ZooKeeper using Kerberos (GSSAPI) authentication.

The procedure assumes that a Kerberos krb5 resource server has been set up on a Red Hat Enterprise Linux host.

The procedure shows, with examples, how to configure:

Service principals
Kafka brokers to use the Kerberos login
ZooKeeper to use Kerberos login
Producer and consumer clients to access Kafka using Kerberos authentication

The instructions describe Kerberos set up for a single ZooKeeper and Kafka installation on a single host, with additional configuration for a producer and consumer client.

Prerequisites

To be able to configure Kafka and ZooKeeper to authenticate and authorize Kerberos credentials, you will need:

Access to a Kerberos server
A Kerberos client on each Kafka broker host

For more information on the steps to set up a Kerberos server, and clients on broker hosts, see the example Kerberos on RHEL set up configuration.

How you deploy Kerberos depends on your operating system. Red Hat recommends using Identity Management (IdM) when setting up Kerberos on Red Hat Enterprise Linux. Users of an Oracle or IBM JDK must install a Java Cryptography Extension (JCE).

Add service principals for authentication

From your Kerberos server, create service principals (users) for ZooKeeper, Kafka brokers, and Kafka producer and consumer clients.

Service principals must take the form SERVICE-NAME/FULLY-QUALIFIED-HOST-NAME@DOMAIN-REALM.

Create the service principals, and keytabs that store the principal keys, through the Kerberos KDC.
For example:
- zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM
- kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM
- producer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM
- consumer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM
  The ZooKeeper service principal must have the same hostname as the zookeeper.connect configuration in the Kafka config/server.properties file:
```
zookeeper.connect=node1.example.redhat.com:2181
```
  If the hostname is not the same, localhost is used and authentication will fail.

Create a directory on the host and add the keytab files:

For example:

/opt/kafka/krb5/zookeeper-node1.keytab
/opt/kafka/krb5/kafka-node1.keytab
/opt/kafka/krb5/kafka-producer1.keytab
/opt/kafka/krb5/kafka-consumer1.keytab

Ensure the kafka user can access the directory:
```
chown kafka:kafka -R /opt/kafka/krb5
```

Configure ZooKeeper to use a Kerberos Login

Configure ZooKeeper to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for zookeeper.

Create or modify the opt/kafka/config/jaas.conf file to support ZooKeeper client and server operations:

Client {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true 1
    storeKey=true 2
    useTicketCache=false 3
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab" 4
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM"; 5
};

Server {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    useTicketCache=false
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

QuorumServer {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

QuorumLearner {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

1: Set to true to get the principal key from the keytab.
2: Set to true to store the principal key.
3: Set to true to obtain the Ticket Granting Ticket (TGT) from the ticket cache.
4: The keyTab property points to the location of the keytab file copied from the Kerberos KDC. The location and file must be readable by the kafka user.
5: The principal property is configured to match the fully-qualified principal name created on the KDC host, which follows the format SERVICE-NAME/FULLY-QUALIFIED-HOST-NAME@DOMAIN-NAME.

Edit opt/kafka/config/zookeeper.properties to use the updated JAAS configuration:
```
# ...

requireClientAuthScheme=sasl
jaasLoginRenew=3600000 1
kerberos.removeHostFromPrincipal=false 2
kerberos.removeRealmFromPrincipal=false 3
quorum.auth.enableSasl=true 4
quorum.auth.learnerRequireSasl=true 5
quorum.auth.serverRequireSasl=true
quorum.auth.learner.loginContext=QuorumLearner 6
quorum.auth.server.loginContext=QuorumServer
quorum.auth.kerberos.servicePrincipal=zookeeper/_HOST 7
quorum.cnxn.threads.size=20
```
1
Controls the frequency for login renewal in milliseconds, which can be adjusted to suit ticket renewal intervals. Default is one hour.
2
Dictates whether the hostname is used as part of the login principal name. If using a single keytab for all nodes in the cluster, this is set to true. However, it is recommended to generate a separate keytab and fully-qualified principal for each broker host for troubleshooting.
3
Controls whether the realm name is stripped from the principal name for Kerberos negotiations. It is recommended that this setting is set as false.
4
Enables SASL authentication mechanisms for the ZooKeeper server and client.
5
The RequireSasl properties controls whether SASL authentication is required for quorum events, such as master elections.
6
The loginContext properties identify the name of the login context in the JAAS configuration used for authentication configuration of the specified component. The loginContext names correspond to the names of the relevant sections in the opt/kafka/config/jaas.conf file.
7
Controls the naming convention to be used to form the principal name used for identification. The placeholder _HOST is automatically resolved to the hostnames defined by the server.1 properties at runtime.
Start ZooKeeper with JVM parameters to specify the Kerberos login configuration:
```
su - kafka
export EXTRA_ARGS="-Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/opt/kafka/config/jaas.conf"; /opt/kafka/bin/zookeeper-server-start.sh -daemon /opt/kafka/config/zookeeper.properties
```
If you are not using the default service name (zookeeper), add the name using the -Dzookeeper.sasl.client.username=NAME parameter.
Note
If you are using the /etc/krb5.conf location, you do not need to specify -Djava.security.krb5.conf=/etc/krb5.conf when starting ZooKeeper, Kafka, or the Kafka producer and consumer.

Configure the Kafka broker server to use a Kerberos login

Configure Kafka to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for kafka.

Modify the opt/kafka/config/jaas.conf file with the following elements:

KafkaServer {
    com.sun.security.auth.module.Krb5LoginModule required
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/kafka-node1.keytab"
    principal="kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};
KafkaClient {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    useTicketCache=false
    keyTab="/opt/kafka/krb5/kafka-node1.keytab"
    principal="kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

Configure each broker in the Kafka cluster by modifying the listener configuration in the config/server.properties file so the listeners use the SASL/GSSAPI login.
Add the SASL protocol to the map of security protocols for the listener, and remove any unwanted protocols.
For example:
```
# ...
broker.id=0
# ...
listeners=SECURE://:9092,REPLICATION://:9094 1
inter.broker.listener.name=REPLICATION
# ...
listener.security.protocol.map=SECURE:SASL_PLAINTEXT,REPLICATION:SASL_PLAINTEXT 2
# ..
sasl.enabled.mechanisms=GSSAPI 3
sasl.mechanism.inter.broker.protocol=GSSAPI 4
sasl.kerberos.service.name=kafka 5
...
```
1
Two listeners are configured: a secure listener for general-purpose communications with clients (supporting TLS for communications), and a replication listener for inter-broker communications.
2
For TLS-enabled listeners, the protocol name is SASL_PLAINTEXT. For non-TLS-enabled connectors, the protocol name is SASL_PLAINTEXT. If SSL is not required, you can remove the ssl.* properties.
3
SASL mechanism for Kerberos authentication is GSSAPI.
4
Kerberos authentication for inter-broker communication.
5
The name of the service used for authentication requests is specified to distinguish it from other services that may also be using the same Kerberos configuration.
Start the Kafka broker, with JVM parameters to specify the Kerberos login configuration:
```
su - kafka
export KAFKA_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/opt/kafka/config/jaas.conf"; /opt/kafka/bin/kafka-server-start.sh -daemon /opt/kafka/config/server.properties
```
If the broker and ZooKeeper cluster were previously configured and working with a non-Kerberos-based authentication system, it is possible to start the ZooKeeper and broker cluster and check for configuration errors in the logs.
After starting the broker and Zookeeper instances, the cluster is now configured for Kerberos authentication.

Configure Kafka producer and consumer clients to use Kerberos authentication

Configure Kafka producer and consumer clients to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for producer1 and consumer1.

Add the Kerberos configuration to the producer or consumer configuration file.

For example:

/opt/kafka/config/producer.properties

# ...
sasl.mechanism=GSSAPI 1
security.protocol=SASL_PLAINTEXT 2
sasl.kerberos.service.name=kafka 3
sasl.jaas.config=com.sun.security.auth.module.Krb5LoginModule required \ 4
    useKeyTab=true  \
    useTicketCache=false \
    storeKey=true  \
    keyTab="/opt/kafka/krb5/producer1.keytab" \
    principal="producer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
# ...

1: Configuration for Kerberos (GSSAPI) authentication.
2: Kerberos uses the SASL plaintext (username/password) security protocol.
3: The service principal (user) for Kafka that was configured in the Kerberos KDC.
4: Configuration for the JAAS using the same properties defined in jaas.conf.

/opt/kafka/config/consumer.properties

# ...
sasl.mechanism=GSSAPI
security.protocol=SASL_PLAINTEXT
sasl.kerberos.service.name=kafka
sasl.jaas.config=com.sun.security.auth.module.Krb5LoginModule required \
    useKeyTab=true  \
    useTicketCache=false \
    storeKey=true  \
    keyTab="/opt/kafka/krb5/consumer1.keytab" \
    principal="consumer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
# ...

Run the clients to verify that you can send and receive messages from the Kafka brokers.

Producer client:

export KAFKA_HEAP_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Dsun.security.krb5.debug=true"; /opt/kafka/bin/kafka-console-producer.sh --producer.config /opt/kafka/config/producer.properties  --topic topic1 --bootstrap-server node1.example.redhat.com:9094

Consumer client:

export KAFKA_HEAP_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Dsun.security.krb5.debug=true"; /opt/kafka/bin/kafka-console-consumer.sh --consumer.config /opt/kafka/config/consumer.properties  --topic topic1 --bootstrap-server node1.example.redhat.com:9094

Additional resources

Kerberos man pages: krb5.conf(5), kinit(1), klist(1), and kdestroy(1)
Example Kerberos server on RHEL set up configuration
Example client application to authenticate with a Kafka cluster using Kerberos tickets

Este conteúdo não está disponível no idioma selecionado.

Chapter 13. Using Kerberos (GSSAPI) authentication

13.1. Setting up AMQ Streams to use Kerberos (GSSAPI) authentication

Add service principals for authentication

Configure ZooKeeper to use a Kerberos Login

Configure the Kafka broker server to use a Kerberos login

Configure Kafka producer and consumer clients to use Kerberos authentication

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links