Este conteúdo não está disponível no idioma selecionado.

Chapter 5. Topics

Messages in Kafka are always sent to or received from a topic. This chapter describes how to configure and manage Kafka topics.

5.1. Partitions and replicas

Messages in Kafka are always sent to or received from a topic. A topic is always split into one or more partitions. Partitions act as shards. That means that every message sent by a producer is always written only into a single partition. Thanks to the sharding of messages into different partitions, topics are easy to scale horizontally.

Each partition can have one or more replicas, which will be stored on different brokers in the cluster. When creating a topic you can configure the number of replicas using the replication factor. Replication factor defines the number of copies which will be held within the cluster. One of the replicas for given partition will be elected as a leader. The leader replica will be used by the producers to send new messages and by the consumers to consume messages. The other replicas will be follower replicas. The followers replicate the leader.

If the leader fails, one of the followers will automatically become the new leader. Each server acts as a leader for some of its partitions and a follower for others so the load is well balanced within the cluster.

Note

The replication factor determines the number of replicas including the leader and the followers. For example, if you set the replication factor to 3, then there will one leader and two follower replicas.

5.2. Message retention

The message retention policy defines how long the messages will be stored on the Kafka brokers. It can be defined based on time, partition size or both.

For example, you can define that the messages should be kept:

For 7 days
Until the parition has 1GB of messages. Once the limit is reached, the oldest messages will be removed.
For 7 days or until the 1GB limit has been reached. Whatever limit comes first will be used.

Warning

Kafka brokers store messages in log segments. The messages which are past their retention policy will be deleted only when a new log segment is created. New log segments are created when the previous log segment exceeds the configured log segment size. Additionally, users can request new segments to be created periodically.

Additionally, Kafka brokers support a compacting policy.

For a topic with the compacted policy, the broker will always keep only the last message for each key. The older messages with the same key will be removed from the partition. Because compacting is a periodically executed action, it does not happen immediately when the new message with the same key are sent to the partition. Instead it might take some time until the older messages are removed.

For more information about the message retention configuration options, see Section 5.5, “Topic configuration”.

5.3. Topic auto-creation

When a producer or consumer tries to send messages to or receive messages from a topic that does not exist, Kafka will, by default, automatically create that topic. This behavior is controlled by the auto.create.topics.enable configuration property which is set to true by default.

To disable it, set auto.create.topics.enable to false in the Kafka broker configuration file:

auto.create.topics.enable=false

5.4. Topic deletion

Kafka offers the possibility to disable deletion of topics. This is configured through the delete.topic.enable property, which is set to true by default (that is, deleting topics is possible). When this property is set to false it will be not possible to delete topics and all attempts to delete topic will return success but the topic will not be deleted.

delete.topic.enable=false

5.5. Topic configuration

Auto-created topics will use the default topic configuration which can be specified in the broker properties file. However, when creating topics manually, their configuration can be specified at creation time. It is also possible to change a topic’s configuration after it has been created. The main topic configuration options for manually created topics are:

cleanup.policy: Configures the retention policy to delete or compact. The delete policy will delete old records. The compact policy will enable log compaction. The default value is delete. For more information about log compaction, see Kafka website.
compression.type: Specifies the compression which is used for stored messages. Valid values are gzip, snappy, lz4, uncompressed (no compression) and producer (retain the compression codec used by the producer). The default value is producer.
max.message.bytes: The maximum size of a batch of messages allowed by the Kafka broker, in bytes. The default value is 1000012.
min.insync.replicas: The minimum number of replicas which must be in sync for a write to be considered successful. The default value is 1.
retention.ms: Maximum number of milliseconds for which log segments will be retained. Log segments older than this value will be deleted. The default value is 604800000 (7 days).
retention.bytes: The maximum number of bytes a partition will retain. Once the partition size grows over this limit, the oldest log segments will be deleted. Value of -1 indicates no limit. The default value is -1.
segment.bytes: The maximum file size of a single commit log segment file in bytes. When the segment reaches its size, a new segment will be started. The default value is 1073741824 bytes (1 gibibyte).

For list of all supported topic configuration options, see Appendix B, Topic configuration parameters.

The defaults for auto-created topics can be specified in the Kafka broker configuration using similar options:

log.cleanup.policy: See cleanup.policy above.
compression.type: See compression.type above.
message.max.bytes: See max.message.bytes above.
min.insync.replicas: See min.insync.replicas above.
log.retention.ms: See retention.ms above.
log.retention.bytes: See retention.bytes above.
log.segment.bytes: See segment.bytes above.
default.replication.factor: Default replication factor for automatically created topics. Default value is 1.
num.partitions: Default number of partitions for automatically created topics. Default value is 1.

For list of all supported Kafka broker configuration options, see Appendix A, Broker configuration parameters.

5.6. Internal topics

Internal topics are created and used internally by the Kafka brokers and clients. Kafka has several internal topics. These are used to store consumer offsets (__consumer_offsets) or transaction state (__transaction_state). These topics can be configured using dedicated Kafka broker configuration options starting with prefix offsets.topic. and transaction.state.log.. The most important configuration options are:

offsets.topic.replication.factor: Number of replicas for __consumer_offsets topic. The default value is 3.
offsets.topic.num.partitions: Number of partitions for __consumer_offsets topic. The default value is 50.
transaction.state.log.replication.factor: Number of replicas for __transaction_state topic. The default value is 3.
transaction.state.log.num.partitions: Number of partitions for __transaction_state topic. The default value is 50.
transaction.state.log.min.isr: Minimum number of replicas that must acknowledge a write to __transaction_state topic to be considered successful. If this minimum cannot be met, then the producer will fail with an exception. The default value is 2.

5.7. Creating a topic

The kafka-topics.sh tool can be used to manage topics. kafka-topics.sh is part of the AMQ Streams distribution and can be found in the bin directory.

Prerequisites

AMQ Streams cluster is installed and running

Creating a topic

Create a topic using the kafka-topics.sh utility and specify the following:
- Host and port of the Kafka broker in the --bootstrap-server option.
- The new topic to be created in the --create option.
- Topic name in the --topic option.
- The number of partitions in the --partitions option.
- Topic replication factor in the --replication-factor option.
  You can also override some of the default topic configuration options using the option --config. This option can be used multiple times to override different options.
```
bin/kafka-topics.sh --bootstrap-server <BrokerAddress> --create --topic <TopicName> --partitions <NumberOfPartitions> --replication-factor <ReplicationFactor> --config <Option1>=<Value1> --config <Option2>=<Value2>
```
  Example of the command to create a topic named mytopic
```
bin/kafka-topics.sh --bootstrap-server localhost:9092 --create --topic mytopic --partitions 50 --replication-factor 3 --config cleanup.policy=compact --config min.insync.replicas=2
```

Verify that the topic exists using kafka-topics.sh.

bin/kafka-topics.sh --bootstrap-server <BrokerAddress> --describe --topic <TopicName>

Example of the command to describe a topic named mytopic

bin/kafka-topics.sh --bootstrap-server localhost:9092 --describe --topic mytopic

Additional resources

For more information about topic configuration, see Section 5.5, “Topic configuration”.
For list of all supported topic configuration options, see Appendix B, Topic configuration parameters.

5.8. Listing and describing topics

The kafka-topics.sh tool can be used to list and describe topics. kafka-topics.sh is part of the AMQ Streams distribution and can be found in the bin directory.

Prerequisites

AMQ Streams cluster is installed and running
Topic mytopic exists

Describing a topic

Describe a topic using the kafka-topics.sh utility and specify the following:
- Host and port of the Kafka broker in the --bootstrap-server option.
- Use the --describe option to specify that you want to describe a topic.
- Topic name must be specified in the --topic option.
- When the --topic option is omitted, it will describe all available topics.
```
bin/kafka-topics.sh --bootstrap-server <BrokerAddress> --describe --topic <TopicName>
```
  Example of the command to describe a topic named mytopic
```
bin/kafka-topics.sh --bootstrap-server localhost:9092 --describe --topic mytopic
```
  The describe command will list all partitions and replicas which belong to this topic. It will also list all topic configuration options.

Additional resources

For more information about topic configuration, see Section 5.5, “Topic configuration”.
For more information about creating topics, see Section 5.7, “Creating a topic”.

5.9. Modifying a topic configuration

The kafka-configs.sh tool can be used to modify topic configurations. kafka-configs.sh is part of the AMQ Streams distribution and can be found in the bin directory.

Prerequisites

AMQ Streams cluster is installed and running
Topic mytopic exists

Modify topic configuration

Use the kafka-configs.sh tool to get the current configuration.
- Specify the host and port of the Kafka broker in the --bootstrap-server option.
- Set the --entity-type as topic and --entity-name to the name of your topic.
- Use --describe option to get the current configuration.
```
bin/kafka-configs.sh --bootstrap-server <BrokerAddress> --entity-type topics --entity-name <TopicName> --describe
```
  Example of the command to get configuration of a topic named mytopic
```
bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --describe
```
Use the kafka-configs.sh tool to change the configuration.
- Specify the host and port of the Kafka broker in the --bootstrap-server option.
- Set the --entity-type as topic and --entity-name to the name of your topic.
- Use --alter option to modify the current configuration.
- Specify the options you want to add or change in the option --add-config.
```
bin/kafka-configs.sh --bootstrap-server <BrokerAddress> --entity-type topics --entity-name <TopicName> --alter --add-config <Option>=<Value>
```
  Example of the command to change configuration of a topic named mytopic
```
bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --alter --add-config min.insync.replicas=1
```
Use the kafka-configs.sh tool to delete an existing configuration option.
- Specify the host and port of the Kafka broker in the --bootstrap-server option.
- Set the --entity-type as topic and --entity-name to the name of your topic.
- Use --delete-config option to remove existing configuration option.
- Specify the options you want to remove in the option --remove-config.
```
bin/kafka-configs.sh --bootstrap-server <BrokerAddress> --entity-type topics --entity-name <TopicName> --alter --delete-config <Option>
```
  Example of the command to change configuration of a topic named mytopic
```
bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --alter --delete-config min.insync.replicas
```

Additional resources

For more information about topic configuration, see Section 5.5, “Topic configuration”.
For more information about creating topics, see Section 5.7, “Creating a topic”.
For list of all supported topic configuration options, see Appendix B, Topic configuration parameters.

5.10. Deleting a topic

The kafka-topics.sh tool can be used to manage topics. kafka-topics.sh is part of the AMQ Streams distribution and can be found in the bin directory.

Prerequisites

AMQ Streams cluster is installed and running
Topic mytopic exists

Deleting a topic

Delete a topic using the kafka-topics.sh utility.
- Host and port of the Kafka broker in the --bootstrap-server option.
- Use the --delete option to specify that an existing topic should be deleted.
- Topic name must be specified in the --topic option.
```
bin/kafka-topics.sh --bootstrap-server <BrokerAddress> --delete --topic <TopicName>
```
  Example of the command to create a topic named mytopic
```
bin/kafka-topics.sh --bootstrap-server localhost:9092 --delete --topic mytopic
```

Verify that the topic was deleted using kafka-topics.sh.

bin/kafka-topics.sh --bootstrap-server <BrokerAddress> --list

Example of the command to list all topics

bin/kafka-topics.sh --bootstrap-server localhost:9092 --list

Additional resources

For more information about creating topics, see Section 5.7, “Creating a topic”.

Este conteúdo não está disponível no idioma selecionado.

Chapter 5. Topics

5.1. Partitions and replicas

5.2. Message retention

5.3. Topic auto-creation

5.4. Topic deletion

5.5. Topic configuration

5.6. Internal topics

5.7. Creating a topic

5.8. Listing and describing topics

5.9. Modifying a topic configuration

5.10. Deleting a topic

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links