此内容没有您所选择的语言版本。
5.4.16.2. Converting a Linear Device to a RAID Device
You can convert an existing linear logical volume to a RAID device by using the
--type argument of the lvconvert command.
The following command converts the linear logical volume
my_lv in volume group my_vg to a 2-way RAID1 array.
# lvconvert --type raid1 -m 1 my_vg/my_lv
Since RAID logical volumes are composed of metadata and data subvolume pairs, when you convert a linear device to a RAID1 array, a new metadata subvolume is created and associated with the original logical volume on (one of) the same physical volumes that the linear volume is on. The additional images are added in metadata/data subvolume pairs. For example, if the original device is as follows:
# lvs -a -o name,copy_percent,devices my_vg
LV Copy% Devices
my_lv /dev/sde1(0)
After conversion to a 2-way RAID1 array the device contains the following data and metadata subvolume pairs:
#lvconvert --type raid1 -m 1 my_vg/my_lv#lvs -a -o name,copy_percent,devices my_vgLV Copy% Devices my_lv 6.25 my_lv_rimage_0(0),my_lv_rimage_1(0) [my_lv_rimage_0] /dev/sde1(0) [my_lv_rimage_1] /dev/sdf1(1) [my_lv_rmeta_0] /dev/sde1(256) [my_lv_rmeta_1] /dev/sdf1(0)
If the metadata image that pairs with the original logical volume cannot be placed on the same physical volume, the
lvconvert will fail.
