此内容没有您所选择的语言版本。
Chapter 35. AWS Simple Queue Service Component
Available as of Camel version 2.6
The sqs component supports sending and receiving messages to Amazon’s SQS service.
Prerequisites
You must have a valid Amazon Web Services developer account, and be signed up to use Amazon SQS. More information are available at Amazon SQS.
35.1. URI Format
aws-sqs://queueNameOrArn[?options]
The queue will be created if they don’t already exists.
You can append query options to the URI in the following format, ?options=value&option2=value&…
35.2. URI Options
The AWS Simple Queue Service component supports 5 options which are listed below.
| Name | Description | Default | Type |
|---|---|---|---|
| configuration (advanced) | The AWS SQS default configuration | SqsConfiguration | |
| accessKey (common) | Amazon AWS Access Key | String | |
| secretKey (common) | Amazon AWS Secret Key | String | |
| region (common) | Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. | String | |
| resolveProperty Placeholders (advanced) | Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders. | true | boolean |
The AWS Simple Queue Service endpoint is configured using URI syntax:
aws-sqs:queueNameOrArn
with the following path and query parameters:
35.2.1. Path Parameters (1 parameters):
| Name | Description | Default | Type |
|---|---|---|---|
| queueNameOrArn | Required Queue name or ARN | String |
35.2.2. Query Parameters (46 parameters):
| Name | Description | Default | Type |
|---|---|---|---|
| amazonAWSHost (common) | The hostname of the Amazon AWS cloud. | amazonaws.com | String |
| amazonSQSClient (common) | To use the AmazonSQS as client | AmazonSQS | |
| headerFilterStrategy (common) | To use a custom HeaderFilterStrategy to map headers to/from Camel. | HeaderFilterStrategy | |
| queueOwnerAWSAccountId (common) | Specify the queue owner aws account id when you need to connect the queue with different account owner. | String | |
| region (common) | Specify the queue region which could be used with queueOwnerAWSAccountId to build the service URL. | String | |
| attributeNames (consumer) | A list of attribute names to receive when consuming. Multiple names can be separated by comma. | String | |
| bridgeErrorHandler (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean |
| concurrentConsumers (consumer) | Allows you to use multiple threads to poll the sqs queue to increase throughput | 1 | int |
| defaultVisibilityTimeout (consumer) | The default visibility timeout (in seconds) | Integer | |
| deleteAfterRead (consumer) | Delete message from SQS after it has been read | true | boolean |
| deleteIfFiltered (consumer) | Whether or not to send the DeleteMessage to the SQS queue if an exchange fails to get through a filter. If 'false' and exchange does not make it through a Camel filter upstream in the route, then don’t send DeleteMessage. | true | boolean |
| extendMessageVisibility (consumer) | If enabled then a scheduled background task will keep extending the message visibility on SQS. This is needed if it takes a long time to process the message. If set to true defaultVisibilityTimeout must be set. See details at Amazon docs. | false | boolean |
| maxMessagesPerPoll (consumer) | Gets the maximum number of messages as a limit to poll at each polling. Is default unlimited, but use 0 or negative number to disable it as unlimited. | int | |
| messageAttributeNames (consumer) | A list of message attribute names to receive when consuming. Multiple names can be separated by comma. | String | |
| sendEmptyMessageWhenIdle (consumer) | If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. | false | boolean |
| visibilityTimeout (consumer) | The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request to set in the com.amazonaws.services.sqs.model.SetQueueAttributesRequest. This only make sense if its different from defaultVisibilityTimeout. It changes the queue visibility timeout attribute permanently. | Integer | |
| waitTimeSeconds (consumer) | Duration in seconds (0 to 20) that the ReceiveMessage action call will wait until a message is in the queue to include in the response. | Integer | |
| exceptionHandler (consumer) | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this options is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. | ExceptionHandler | |
| exchangePattern (consumer) | Sets the exchange pattern when the consumer creates an exchange. | ExchangePattern | |
| pollStrategy (consumer) | A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel. | PollingConsumerPoll Strategy | |
| delaySeconds (producer) | Delay sending messages for a number of seconds. | Integer | |
| messageDeduplicationId Strategy (producer) | Only for FIFO queues. Strategy for setting the messageDeduplicationId on the message. Can be one of the following options: useExchangeId, useContentBasedDeduplication. For the useContentBasedDeduplication option, no messageDeduplicationId will be set on the message. | useExchangeId | MessageDeduplicationId Strategy |
| messageGroupIdStrategy (producer) | Only for FIFO queues. Strategy for setting the messageGroupId on the message. Can be one of the following options: useConstant, useExchangeId, usePropertyValue. For the usePropertyValue option, the value of property CamelAwsMessageGroupId will be used. | MessageGroupIdStrategy | |
| synchronous (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean |
| backoffErrorThreshold (scheduler) | The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. | int | |
| backoffIdleThreshold (scheduler) | The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. | int | |
| backoffMultiplier (scheduler) | To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. | int | |
| delay (scheduler) | Milliseconds before the next poll. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour). | 500 | long |
| greedy (scheduler) | If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. | false | boolean |
| initialDelay (scheduler) | Milliseconds before the first poll starts. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour). | 1000 | long |
| runLoggingLevel (scheduler) | The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. | TRACE | LoggingLevel |
| scheduledExecutorService (scheduler) | Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. | ScheduledExecutor Service | |
| scheduler (scheduler) | To use a cron scheduler from either camel-spring or camel-quartz2 component | none | ScheduledPollConsumer Scheduler |
| schedulerProperties (scheduler) | To configure additional properties when using a custom scheduler or any of the Quartz2, Spring based scheduler. | Map | |
| startScheduler (scheduler) | Whether the scheduler should be auto started. | true | boolean |
| timeUnit (scheduler) | Time unit for initialDelay and delay options. | MILLISECONDS | TimeUnit |
| useFixedDelay (scheduler) | Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. | true | boolean |
| proxyHost (proxy) | To define a proxy host when instantiating the SQS client | String | |
| proxyPort (proxy) | To define a proxy port when instantiating the SQS client | Integer | |
| maximumMessageSize (queue) | The maximumMessageSize (in bytes) an SQS message can contain for this queue. | Integer | |
| messageRetentionPeriod (queue) | The messageRetentionPeriod (in seconds) a message will be retained by SQS for this queue. | Integer | |
| policy (queue) | The policy for this queue | String | |
| receiveMessageWaitTime Seconds (queue) | If you do not specify WaitTimeSeconds in the request, the queue attribute ReceiveMessageWaitTimeSeconds is used to determine how long to wait. | Integer | |
| redrivePolicy (queue) | Specify the policy that send message to DeadLetter queue. See detail at Amazon docs. | String | |
| accessKey (security) | Amazon AWS Access Key | String | |
| secretKey (security) | Amazon AWS Secret Key | String |
Required SQS component options
You have to provide the amazonSQSClient in the Registry or your accessKey and secretKey to access the Amazon’s SQS.
35.3. Batch Consumer
This component implements the Batch Consumer.
This allows you for instance to know how many messages exists in this batch and for instance let the Aggregator aggregate this number of messages.
35.4. Usage
35.4.1. Message headers set by the SQS producer
| Header | Type | Description |
|---|---|---|
|
|
| The MD5 checksum of the Amazon SQS message. |
|
|
| The Amazon SQS message ID. |
|
|
| Since Camel 2.11, the delay seconds that the Amazon SQS message can be see by others. |
35.4.2. Message headers set by the SQS consumer
| Header | Type | Description |
|---|---|---|
|
|
| The MD5 checksum of the Amazon SQS message. |
|
|
| The Amazon SQS message ID. |
|
|
| The Amazon SQS message receipt handle. |
|
|
| The Amazon SQS message attributes. |
35.4.3. Advanced AmazonSQS configuration
If your Camel Application is running behind a firewall or if you need to have more control over the AmazonSQS instance configuration, you can create your own instance:
AWSCredentials awsCredentials = new BasicAWSCredentials("myAccessKey", "mySecretKey");
ClientConfiguration clientConfiguration = new ClientConfiguration();
clientConfiguration.setProxyHost("http://myProxyHost");
clientConfiguration.setProxyPort(8080);
AmazonSQS client = new AmazonSQSClient(awsCredentials, clientConfiguration);
registry.bind("client", client);and refer to it in your Camel aws-sqs component configuration:
from("aws-sqs://MyQueue?amazonSQSClient=#client&delay=5000&maxMessagesPerPoll=5")
.to("mock:result");35.5. Dependencies
Maven users will need to add the following dependency to their pom.xml.
pom.xml
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-aws</artifactId>
<version>${camel-version}</version>
</dependency>
where ${camel-version} must be replaced by the actual version of Camel (2.6 or higher).
35.6. JMS-style Selectors
SQS does not allow selectors, but you can effectively achieve this by using the Camel Filter EIP and setting an appropriate visibilityTimeout. When SQS dispatches a message, it will wait up to the visibility timeout before it will try to dispatch the message to a different consumer unless a DeleteMessage is received. By default, Camel will always send the DeleteMessage at the end of the route, unless the route ended in failure. To achieve appropriate filtering and not send the DeleteMessage even on successful completion of the route, use a Filter:
from("aws-sqs://MyQueue?amazonSQSClient=#client&defaultVisibilityTimeout=5000&deleteIfFiltered=false")
.filter("${header.login} == true")
.to("mock:result");In the above code, if an exchange doesn’t have an appropriate header, it will not make it through the filter AND also not be deleted from the SQS queue. After 5000 miliseconds, the message will become visible to other consumers.
35.7. See Also
- Configuring Camel
- Component
- Endpoint
- Getting Started
- AWS Component
