Chapter 16. Ingress [config.openshift.io/v1]

appsDomain

string

appsDomain is an optional domain to use instead of the one specified in the domain field when a Route is created without specifying an explicit host. If appsDomain is nonempty, this value is used to generate default host values for Route. Unlike domain, appsDomain may be modified after installation. This assumes a new ingresscontroller has been setup with a wildcard certificate.

componentRoutes

array

componentRoutes is an optional list of routes that are managed by OpenShift components that a cluster-admin is able to configure the hostname and serving certificate for. The namespace and name of each route in this list should match an existing entry in the status.componentRoutes list. To determine the set of configurable Routes, look at namespace and name of entries in the .status.componentRoutes list, where participating operators write the status of configurable routes.

componentRoutes[]

object

ComponentRouteSpec allows for configuration of a route’s hostname and serving certificate.

domain

string

domain is used to generate a default host name for a route when the route’s host name is empty. The generated host name will follow this pattern: "<route-name>.<route-namespace>.<domain>". It is also used as the default wildcard domain suffix for ingress. The default ingresscontroller domain will follow this pattern: "*.<domain>". Once set, changing domain is not currently supported.

loadBalancer

object

loadBalancer contains the load balancer details in general which are not only specific to the underlying infrastructure provider of the current cluster and are required for Ingress Controller to work on OpenShift.

requiredHSTSPolicies

array

requiredHSTSPolicies specifies HSTS policies that are required to be set on newly created or updated routes matching the domainPattern/s and namespaceSelector/s that are specified in the policy. Each requiredHSTSPolicy must have at least a domainPattern and a maxAge to validate a route HSTS Policy route annotation, and affect route admission. A candidate route is checked for HSTS Policies if it has the HSTS Policy route annotation: "haproxy.router.openshift.io/hsts_header" E.g. haproxy.router.openshift.io/hsts_header: max-age=31536000;preload;includeSubDomains - For each candidate route, if it matches a requiredHSTSPolicy domainPattern and optional namespaceSelector, then the maxAge, preloadPolicy, and includeSubdomainsPolicy must be valid to be admitted. Otherwise, the route is rejected. - The first match, by domainPattern and optional namespaceSelector, in the ordering of the RequiredHSTSPolicies determines the route’s admission status. - If the candidate route doesn’t match any requiredHSTSPolicy domainPattern and optional namespaceSelector, then it may use any HSTS Policy annotation. The HSTS policy configuration may be changed after routes have already been created. An update to a previously admitted route may then fail if the updated route does not conform to the updated HSTS policy configuration. However, changing the HSTS policy configuration will not cause a route that is already admitted to stop working. Note that if there are no RequiredHSTSPolicies, any HSTS Policy annotation on the route is valid.

requiredHSTSPolicies[]

object

hostname

string

hostname is the hostname that should be used by the route.

name

string

name is the logical name of the route to customize. The namespace and name of this componentRoute must match a corresponding entry in the list of status.componentRoutes if the route is to be customized.

namespace

string

namespace is the namespace of the route to customize. The namespace and name of this componentRoute must match a corresponding entry in the list of status.componentRoutes if the route is to be customized.

servingCertKeyPairSecret

object

servingCertKeyPairSecret is a reference to a secret of type kubernetes.io/tls in the openshift-config namespace. The serving cert/key pair must match and will be used by the operator to fulfill the intent of serving with this name. If the custom hostname uses the default routing suffix of the cluster, the Secret specification for a serving certificate will not be needed.

name

string

name is the metadata.name of the referenced secret

platform

object

platform holds configuration specific to the underlying infrastructure provider for the ingress load balancers. When omitted, this means the user has no opinion and the platform is left to choose reasonable defaults. These defaults are subject to change over time.

aws

object

aws contains settings specific to the Amazon Web Services infrastructure provider.

type

string

type is the underlying infrastructure provider for the cluster. Allowed values are "AWS", "Azure", "BareMetal", "GCP", "Libvirt", "OpenStack", "VSphere", "oVirt", "KubeVirt", "EquinixMetal", "PowerVS", "AlibabaCloud", "Nutanix" and "None". Individual components may not support all platforms, and must handle unrecognized platforms as None if they do not support that platform.

type

string

type allows user to set a load balancer type. When this field is set the default ingresscontroller will get created using the specified LBType. If this field is not set then the default ingress controller of LBType Classic will be created. Valid values are: * "Classic": A Classic Load Balancer that makes routing decisions at either the transport layer (TCP/SSL) or the application layer (HTTP/HTTPS). See the following for additional details: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/load-balancer-types.html#clb * "NLB": A Network Load Balancer that makes routing decisions at the transport layer (TCP/SSL). See the following for additional details: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/load-balancer-types.html#nlb

domainPatterns

array (string)

domainPatterns is a list of domains for which the desired HSTS annotations are required. If domainPatterns is specified and a route is created with a spec.host matching one of the domains, the route must specify the HSTS Policy components described in the matching RequiredHSTSPolicy. The use of wildcards is allowed like this: .foo.com matches everything under foo.com. foo.com only matches foo.com, so to cover foo.com and everything under it, you must specify *both.

includeSubDomainsPolicy

string

includeSubDomainsPolicy means the HSTS Policy should apply to any subdomains of the host’s domain name. Thus, for the host bar.foo.com, if includeSubDomainsPolicy was set to RequireIncludeSubDomains: - the host app.bar.foo.com would inherit the HSTS Policy of bar.foo.com - the host bar.foo.com would inherit the HSTS Policy of bar.foo.com - the host foo.com would NOT inherit the HSTS Policy of bar.foo.com - the host def.foo.com would NOT inherit the HSTS Policy of bar.foo.com

maxAge

object

maxAge is the delta time range in seconds during which hosts are regarded as HSTS hosts. If set to 0, it negates the effect, and hosts are removed as HSTS hosts. If set to 0 and includeSubdomains is specified, all subdomains of the host are also removed as HSTS hosts. maxAge is a time-to-live value, and if this policy is not refreshed on a client, the HSTS policy will eventually expire on that client.

namespaceSelector

object

namespaceSelector specifies a label selector such that the policy applies only to those routes that are in namespaces with labels that match the selector, and are in one of the DomainPatterns. Defaults to the empty LabelSelector, which matches everything.

preloadPolicy

string

preloadPolicy directs the client to include hosts in its host preload list so that it never needs to do an initial load to get the HSTS header (note that this is not defined in RFC 6797 and is therefore client implementation-dependent).

largestMaxAge

integer

The largest allowed value (in seconds) of the RequiredHSTSPolicy max-age This value can be left unspecified, in which case no upper limit is enforced.

smallestMaxAge

integer

The smallest allowed value (in seconds) of the RequiredHSTSPolicy max-age Setting max-age=0 allows the deletion of an existing HSTS header from a host. This is a necessary tool for administrators to quickly correct mistakes. This value can be left unspecified, in which case no lower limit is enforced.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

componentRoutes

array

componentRoutes is where participating operators place the current route status for routes whose hostnames and serving certificates can be customized by the cluster-admin.

componentRoutes[]

object

ComponentRouteStatus contains information allowing configuration of a route’s hostname and serving certificate.

defaultPlacement

string

defaultPlacement is set at installation time to control which nodes will host the ingress router pods by default. The options are control-plane nodes or worker nodes. This field works by dictating how the Cluster Ingress Operator will consider unset replicas and nodePlacement fields in IngressController resources when creating the corresponding Deployments. See the documentation for the IngressController replicas and nodePlacement fields for more information. When omitted, the default value is Workers

conditions

array

conditions are used to communicate the state of the componentRoutes entry. Supported conditions include Available, Degraded and Progressing. If available is true, the content served by the route can be accessed by users. This includes cases where a default may continue to serve content while the customized route specified by the cluster-admin is being configured. If Degraded is true, that means something has gone wrong trying to handle the componentRoutes entry. The currentHostnames field may or may not be in effect. If Progressing is true, that means the component is taking some action related to the componentRoutes entry.

conditions[]

object

Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example, type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions" // other fields }

consumingUsers

array (string)

consumingUsers is a slice of ServiceAccounts that need to have read permission on the servingCertKeyPairSecret secret.

currentHostnames

array (string)

currentHostnames is the list of current names used by the route. Typically, this list should consist of a single hostname, but if multiple hostnames are supported by the route the operator may write multiple entries to this list.

defaultHostname

string

defaultHostname is the hostname of this route prior to customization.

name

string

name is the logical name of the route to customize. It does not have to be the actual name of a route resource but it cannot be renamed. The namespace and name of this componentRoute must match a corresponding entry in the list of spec.componentRoutes if the route is to be customized.

namespace

string

namespace is the namespace of the route to customize. It must be a real namespace. Using an actual namespace ensures that no two components will conflict and the same component can be installed multiple times. The namespace and name of this componentRoute must match a corresponding entry in the list of spec.componentRoutes if the route is to be customized.

relatedObjects

array

relatedObjects is a list of resources which are useful when debugging or inspecting how spec.componentRoutes is applied.

relatedObjects[]

object

ObjectReference contains enough information to let you inspect or modify the referred object.

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

message is a human readable message indicating details about the transition. This may be an empty string.

observedGeneration

integer

observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.

reason

string

reason contains a programmatic identifier indicating the reason for the condition’s last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)

group

string

group of the referent.

name

string

name of the referent.

namespace

string

namespace of the referent.

resource

string

resource of the referent.

pretty

string

If 'true', then the output is pretty printed.

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

Status schema

401 - Unauthorized

Empty

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

IngressList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Ingress schema

200 - OK

Ingress schema

201 - Created

Ingress schema

202 - Accepted

Ingress schema

401 - Unauthorized

Empty

name

string

name of the Ingress

pretty

string

If 'true', then the output is pretty printed.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

body

DeleteOptions schema

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

Ingress schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Patch schema

200 - OK

Ingress schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Ingress schema

200 - OK

Ingress schema

201 - Created

Ingress schema

401 - Unauthorized

Empty

name

string

name of the Ingress

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

Ingress schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Patch schema

200 - OK

Ingress schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Ingress schema

200 - OK

Ingress schema

201 - Created

Ingress schema

401 - Unauthorized

Empty