Chapter 2. AdminPolicyBasedExternalRoute [k8s.ovn.org/v1]

from

object

From defines the selectors that will determine the target namespaces to this CR.

nextHops

object

NextHops defines two types of hops: Static and Dynamic. Each hop defines at least one external gateway IP.

namespaceSelector

object

NamespaceSelector defines a selector to be used to determine which namespaces will be targeted by this CR

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

dynamic

array

DynamicHops defines a slices of DynamicHop. This field is optional.

dynamic[]

object

DynamicHop defines the configuration for a dynamic external gateway interface. These interfaces are wrapped around a pod object that resides inside the cluster. The field NetworkAttachmentName captures the name of the multus network name to use when retrieving the gateway IP to use. The PodSelector and the NamespaceSelector are mandatory fields.

static

array

StaticHops defines a slice of StaticHop. This field is optional.

static[]

object

StaticHop defines the configuration of a static IP that acts as an external Gateway Interface. IP field is mandatory.

bfdEnabled

boolean

BFDEnabled determines if the interface implements the Bidirectional Forward Detection protocol. Defaults to false.

namespaceSelector

object

NamespaceSelector defines a selector to filter the namespaces where the pod gateways are located.

networkAttachmentName

string

NetworkAttachmentName determines the multus network name to use when retrieving the pod IPs that will be used as the gateway IP. When this field is empty, the logic assumes that the pod is configured with HostNetwork and is using the node’s IP as gateway.

podSelector

object

PodSelector defines the selector to filter the pods that are external gateways.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

bfdEnabled

boolean

BFDEnabled determines if the interface implements the Bidirectional Forward Detection protocol. Defaults to false.

ip

string

IP defines the static IP to be used for egress traffic. The IP can be either IPv4 or IPv6.

lastTransitionTime

string

Captures the time when the last change was applied.

messages

array (string)

An array of Human-readable messages indicating details about the status of the object.

status

string

A concise indication of whether the AdminPolicyBasedRoute resource is applied with success

pretty

string

If 'true', then the output is pretty printed.

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

sendInitialEvents

boolean

sendInitialEvents=true may be set together with watch=true. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with "k8s.io/initial-events-end": "true" annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched.

When sendInitialEvents option is set, we require resourceVersionMatch option to also be set. The semantic of the watch request is as following: - resourceVersionMatch = NotOlderThan is interpreted as "data at least as new as the provided resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion at least as fresh as the one provided by the ListOptions. If resourceVersion is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - resourceVersionMatch set to any other value or unset Invalid error is returned.

Defaults to true if resourceVersion="" or resourceVersion="0" (for backward compatibility reasons) and to false otherwise.

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

Status schema

401 - Unauthorized

Empty

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

sendInitialEvents

boolean

sendInitialEvents=true may be set together with watch=true. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with "k8s.io/initial-events-end": "true" annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched.

When sendInitialEvents option is set, we require resourceVersionMatch option to also be set. The semantic of the watch request is as following: - resourceVersionMatch = NotOlderThan is interpreted as "data at least as new as the provided resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion at least as fresh as the one provided by the ListOptions. If resourceVersion is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - resourceVersionMatch set to any other value or unset Invalid error is returned.

Defaults to true if resourceVersion="" or resourceVersion="0" (for backward compatibility reasons) and to false otherwise.

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

AdminPolicyBasedExternalRouteList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminPolicyBasedExternalRoute schema

200 - OK

AdminPolicyBasedExternalRoute schema

201 - Created

AdminPolicyBasedExternalRoute schema

202 - Accepted

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

name

string

name of the AdminPolicyBasedExternalRoute

pretty

string

If 'true', then the output is pretty printed.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

body

DeleteOptions schema

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

force

boolean

Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

body

Patch schema

200 - OK

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminPolicyBasedExternalRoute schema

200 - OK

AdminPolicyBasedExternalRoute schema

201 - Created

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

name

string

name of the AdminPolicyBasedExternalRoute

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

force

boolean

Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

body

Patch schema

200 - OK

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminPolicyBasedExternalRoute schema

200 - OK

AdminPolicyBasedExternalRoute schema

201 - Created

AdminPolicyBasedExternalRoute schema

401 - Unauthorized

Empty