Installing

1. The bootstrap machine boots and starts hosting the remote resources required for the control plane machines to boot. (Requires manual intervention if you provision the infrastructure)
2. The bootstrap machine starts a single-node etcd cluster and a temporary Kubernetes control plane.
3. The control plane machines fetch the remote resources from the bootstrap machine and finish booting. (Requires manual intervention if you provision the infrastructure)
4. The temporary control plane schedules the production control plane to the production control plane machines.
5. The Cluster Version Operator (CVO) comes online and installs the etcd Operator. The etcd Operator scales up etcd on all control plane nodes.
6. The temporary control plane shuts down and passes control to the production control plane.
7. The bootstrap machine injects OpenShift Container Platform components into the production control plane.
8. The installation program shuts down the bootstrap machine. (Requires manual intervention if you provision the infrastructure)
9. The control plane sets up the compute nodes.
10. The control plane installs additional services in the form of a set of Operators.

Procedure

1. Show the status of all worker nodes:

   $ oc get nodes

   Example output

   NAME                           STATUS   ROLES    AGE   VERSION
   example-compute1.example.com   Ready    worker   13m   v1.21.6+bb8d50a
   example-compute2.example.com   Ready    worker   13m   v1.21.6+bb8d50a
   example-compute4.example.com   Ready    worker   14m   v1.21.6+bb8d50a
   example-control1.example.com   Ready    master   52m   v1.21.6+bb8d50a
   example-control2.example.com   Ready    master   55m   v1.21.6+bb8d50a
   example-control3.example.com   Ready    master   55m   v1.21.6+bb8d50a

2. Show the phase of all worker machine nodes:

   $ oc get machines -A

   Example output

   NAMESPACE               NAME                           PHASE         TYPE   REGION   ZONE   AGE
   openshift-machine-api   example-zbbt6-master-0         Running                              95m
   openshift-machine-api   example-zbbt6-master-1         Running                              95m
   openshift-machine-api   example-zbbt6-master-2         Running                              95m
   openshift-machine-api   example-zbbt6-worker-0-25bhp   Running                              49m
   openshift-machine-api   example-zbbt6-worker-0-8b4c2   Running                              49m
   openshift-machine-api   example-zbbt6-worker-0-jkbqt   Running                              49m
   openshift-machine-api   example-zbbt6-worker-0-qrl5b   Running                              49m

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Linux Client entry and save the file.

4. Unpack the archive:

   $ tar xvzf <file>

5. Place the oc binary in a directory that is on your PATH.

   To check your PATH, execute the following command:

   $ echo $PATH

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Windows Client entry and save the file.
4. Unzip the archive with a ZIP program.

5. Move the oc binary to a directory that is on your PATH.

   To check your PATH, open the command prompt and execute the following command:

   C:\> path

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 MacOSX Client entry and save the file.
4. Unpack and unzip the archive.

5. Move the oc binary to a directory on your PATH.

   To check your PATH, open a terminal and execute the following command:

   $ echo $PATH

Procedure

1. Download the mirror-registry.tar.gz package for the latest version of the mirror registry for Red Hat OpenShift found on the OpenShift console Downloads page.

2. Install the mirror registry for Red Hat OpenShift on your local host with your current user account by using the mirror-registry tool. For a full list of available flags, see "mirror registry for Red Hat OpenShift flags".

   $ sudo ./mirror-registry install \
     --quayHostname <host_example_com> \
     --quayRoot <example_directory_name>

3. Use the user name and password generated during installation to log into the registry by running the following command:

   $ podman login --authfile pull-secret.txt \
     -u init \
     -p <password> \
     <host_example_com>:8443> \
     --tls-verify=false 1

   1

   You can avoid running --tls-verify=false by configuring your system to trust the generated rootCA certificates. See "Using SSL to protect connections to Red Hat Quay" and "Configuring the system to trust the certificate authority" for more information.

   Note

   You can also log in by accessing the UI at https://<host.example.com>:8443 after installation.

4. You can mirror OpenShift Container Platform images after logging in. Depending on your needs, see either the "Mirroring the OpenShift Container Platform image repository" or the "Mirroring an Operator catalog" sections of this document.

   Note

   If there are issues with images stored by the mirror registry for Red Hat OpenShift due to storage layer problems, you can remirror the OpenShift Container Platform images, or reinstall mirror registry on more stable storage.

Procedure

1. Download the mirror-registry.tar.gz package for the latest version of the mirror registry for Red Hat OpenShift found on the OpenShift console Downloads page.

2. Install the mirror registry for Red Hat OpenShift on your local host with your current user account by using the mirror-registry tool. For a full list of available flags, see "mirror registry for Red Hat OpenShift flags".

   $ sudo ./mirror-registry install -v \
     --targetHostname <host_example_com> \
     --targetUsername <example_user> \
     -k ~/.ssh/my_ssh_key \
     --quayHostname <host_example_com> \
     --quayRoot <example_directory_name>

3. Use the user name and password generated during installation to log into the mirror registry by running the following command:

   $ podman login --authfile pull-secret.txt \
     -u init \
     -p <password> \
     <host_example_com>:8443> \
     --tls-verify=false 1

   1

   You can avoid running --tls-verify=false by configuring your system to trust the generated rootCA certificates. See "Using SSL to protect connections to Red Hat Quay" and "Configuring the system to trust the certificate authority" for more information.

   Note

   You can also log in by accessing the UI at https://<host.example.com>:8443 after installation.

4. You can mirror OpenShift Container Platform images after logging in. Depending on your needs, see either the "Mirroring the OpenShift Container Platform image repository" or the "Mirroring an Operator catalog" sections of this document.

   Note

   If there are issues with images stored by the mirror registry for Red Hat OpenShift due to storage layer problems, you can remirror the OpenShift Container Platform images, or reinstall mirror registry on more stable storage.

Procedure

1. Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through AWS or another source.

   Note

   If you purchase a new domain through AWS, it takes time for the relevant DNS changes to propagate. For more information about purchasing domains through AWS, see Registering Domain Names Using Amazon Route 53 in the AWS documentation.

2. If you are using an existing domain and registrar, migrate its DNS to AWS. See Making Amazon Route 53 the DNS Service for an Existing Domain in the AWS documentation.

3. Create a public hosted zone for your domain or subdomain. See Creating a Public Hosted Zone in the AWS documentation.

   Use an appropriate root domain, such as openshiftcorp.com, or subdomain, such as clusters.openshiftcorp.com.

4. Extract the new authoritative name servers from the hosted zone records. See Getting the Name Servers for a Public Hosted Zone in the AWS documentation.
5. Update the registrar records for the AWS Route 53 name servers that your domain uses. For example, if you registered your domain to a Route 53 service in a different accounts, see the following topic in the AWS documentation: Adding or Changing Name Servers or Glue Records.
6. If you are using a subdomain, add its delegation records to the parent domain. This gives Amazon Route 53 responsibility for the subdomain. Follow the delegation procedure outlined by the DNS provider of the parent domain. See Creating a subdomain that uses Amazon Route 53 as the DNS service without migrating the parent domain in the AWS documentation for an example high level procedure.

Procedure

1. Specify the IAM user name and select Programmatic access.

2. Attach the AdministratorAccess policy to ensure that the account has sufficient permission to create the cluster. This policy provides the cluster with the ability to grant credentials to each OpenShift Container Platform component. The cluster grants the components only the credentials that they require.

   Note

   While it is possible to create a policy that grants the all of the required AWS permissions and attach it to the user, this is not the preferred option. The cluster will not have the ability to grant additional credentials to individual components, so the same credentials are used by all components.

3. Optional: Add metadata to the user by attaching tags.
4. Confirm that the user name that you specified is granted the AdministratorAccess policy.

5. Record the access key ID and secret access key values. You must use these values when you configure your local machine to run the installation program.

   Important

   You cannot use a temporary session token that you generated while using a multi-factor authentication device to authenticate to AWS when you deploy a cluster. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use key-based, long-lived credentials.

Procedure

1. Change to the directory that contains the installation program and create the install-config.yaml file:

   $ openshift-install create install-config --dir <installation_directory>

   where <installation_directory> is the directory in which the installation program creates files.

2. Edit the install-config.yaml configuration file so that it contains the credentialsMode parameter set to Manual.

   Example install-config.yaml configuration file

   apiVersion: v1
   baseDomain: cluster1.example.com
   credentialsMode: Manual 1
   compute:
   - architecture: amd64
     hyperthreading: Enabled
   ...

   1

   This line is added to set the credentialsMode parameter to Manual.

3. To generate the manifests, run the following command from the directory that contains the installation program:

   $ openshift-install create manifests --dir <installation_directory>

4. From the directory that contains the installation program, obtain details of the OpenShift Container Platform release image that your openshift-install binary is built to use:

   $ openshift-install version

   Example output

   release image quay.io/openshift-release-dev/ocp-release:4.y.z-x86_64

5. Locate all CredentialsRequest objects in this release image that target the cloud you are deploying on:

   $ oc adm release extract quay.io/openshift-release-dev/ocp-release:4.y.z-x86_64 --credentials-requests --cloud=aws

   This command creates a YAML file for each CredentialsRequest object.

   Sample CredentialsRequest object

   apiVersion: cloudcredential.openshift.io/v1
   kind: CredentialsRequest
   metadata:
     name: cloud-credential-operator-iam-ro
     namespace: openshift-cloud-credential-operator
   spec:
     secretRef:
       name: cloud-credential-operator-iam-ro-creds
       namespace: openshift-cloud-credential-operator
     providerSpec:
       apiVersion: cloudcredential.openshift.io/v1
       kind: AWSProviderSpec
       statementEntries:
       - effect: Allow
         action:
         - iam:GetUser
         - iam:GetUserPolicy
         - iam:ListAccessKeys
         resource: "*"

6. Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in the spec.secretRef for each CredentialsRequest object. The format for the secret data varies for each cloud provider.

7. From the directory that contains the installation program, proceed with your cluster creation:

   $ openshift-install create cluster --dir <installation_directory>

   Important

   Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state. For details, see the "Upgrading clusters with manually maintained credentials" section of the installation content for your cloud provider.

Procedure

1. Extract and examine the CredentialsRequest custom resource for the new release.

   The "Manually creating IAM" section of the installation content for your cloud provider explains how to obtain and use the credentials required for your cloud.

2. Update the manually maintained credentials on your cluster:

   • Create new secrets for any CredentialsRequest custom resources that are added by the new release image.
   • If the CredentialsRequest custom resources for any existing credentials that are stored in secrets have changed their permissions requirements, update the permissions as required.

3. When all of the secrets are correct for the new release, indicate that the cluster is ready to upgrade:

   1. Log in to the OpenShift Container Platform CLI as a user with the cluster-admin role.

   2. Edit the CloudCredential resource to add an upgradeable-to annotation within the metadata field:

      $ oc edit cloudcredential cluster

      Text to add

      ...
        metadata:
          annotations:
            cloudcredential.openshift.io/upgradeable-to: <version_number>
      ...

      Where <version_number> is the version you are upgrading to, in the format x.y.z. For example, 4.8.2 for OpenShift Container Platform 4.8.2.

      It may take several minutes after adding the annotation for the upgradeable status to change.

4. Verify that the CCO is upgradeable:

   1. In the Administrator perspective of the web console, navigate to Administration → Cluster Settings.
   2. To view the CCO status details, click cloud-credential in the Cluster Operators list.
   3. If the Upgradeable status in the Conditions section is False, verify that the upgradeable-to annotation is free of typographical errors.

Procedure

1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   Note

   If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. View the public SSH key:

   $ cat <path>/<file_name>.pub

   For example, run the following to view the ~/.ssh/id_ed25519.pub public key:

   $ cat ~/.ssh/id_ed25519.pub

3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

   Note

   On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

   1. If the ssh-agent process is not already running for your local user, start it as a background task:

      $ eval "$(ssh-agent -s)"

      Example output

      Agent pid 31874

      Note

      If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

4. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

Procedure

1. Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
2. Select your infrastructure provider.

3. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.

4. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf openshift-install-linux.tar.gz

5. Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Change to the directory that contains the installation program and initialize the cluster deployment:

   $ ./openshift-install create cluster --dir <installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the directory name to store the files that the installation program creates.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Important

   Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   Provide values at the prompts:

   1. Optional: Select an SSH key to use to access your cluster machines.

      Note

      For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

   2. Select aws as the platform to target.

   3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.

      Note

      The AWS access key ID and secret access key are stored in ~/.aws/credentials in the home directory of the current user on the installation host. You are prompted for the credentials by the installation program if the credentials for the exported profile are not present in the file. Any credentials that you provide to the installation program are stored in the file.

   4. Select the AWS region to deploy the cluster to.
   5. Select the base domain for the Route 53 service that you configured for your cluster.
   6. Enter a descriptive name for your cluster.
   7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Example output

   ...
   INFO Install complete!
   INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
   INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
   INFO Login to the console with user: "kubeadmin", and password: "4vYBz-Ee6gm-ymBZj-Wt5AL"
   INFO Time elapsed: 36m22s

   Note

   The cluster access and credential information also outputs to <installation_directory>/.openshift_install.log when an installation succeeds.

   Important
   • The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
   • It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

2. Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

   Note

   The elevated permissions provided by the AdministratorAccess policy are required only during installation.

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Linux Client entry and save the file.

4. Unpack the archive:

   $ tar xvzf <file>

5. Place the oc binary in a directory that is on your PATH.

   To check your PATH, execute the following command:

   $ echo $PATH

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Windows Client entry and save the file.
4. Unzip the archive with a ZIP program.

5. Move the oc binary to a directory that is on your PATH.

   To check your PATH, open the command prompt and execute the following command:

   C:\> path

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 MacOSX Client entry and save the file.
4. Unpack and unzip the archive.

5. Move the oc binary to a directory on your PATH.

   To check your PATH, open a terminal and execute the following command:

   $ echo $PATH

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami

   Example output

   system:admin

Procedure

1. Obtain the password for the kubeadmin user from the kubeadmin-password file on the installation host:

   $ cat <installation_directory>/auth/kubeadmin-password

   Note

   Alternatively, you can obtain the kubeadmin password from the <installation_directory>/.openshift_install.log log file on the installation host.

2. List the OpenShift Container Platform web console route:

   $ oc get routes -n openshift-console | grep 'console-openshift'

   Note

   Alternatively, you can obtain the OpenShift Container Platform route from the <installation_directory>/.openshift_install.log log file on the installation host.

   Example output

   console     console-openshift-console.apps.<cluster_name>.<base_domain>            console     https   reencrypt/Redirect   None

3. Navigate to the route detailed in the output of the preceding command in a web browser and log in as the kubeadmin user.

Procedure

1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   Note

   If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. View the public SSH key:

   $ cat <path>/<file_name>.pub

   For example, run the following to view the ~/.ssh/id_ed25519.pub public key:

   $ cat ~/.ssh/id_ed25519.pub

3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

   Note

   On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

   1. If the ssh-agent process is not already running for your local user, start it as a background task:

      $ eval "$(ssh-agent -s)"

      Example output

      Agent pid 31874

      Note

      If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

4. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

Procedure

1. Complete the OpenShift Container Platform subscription from the AWS Marketplace.
2. Record the AMI ID for your specific region. As part of the installation process, you must update the install-config.yaml file with this value before deploying the cluster.

Procedure

1. Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
2. Select your infrastructure provider.

3. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.

4. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf openshift-install-linux.tar.gz

5. Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Change to the directory that contains the installation program and run the following command:

      $ ./openshift-install create install-config --dir <installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         Note

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select AWS as the platform to target.
      3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
      4. Select the AWS region to deploy the cluster to.
      5. Select the base domain for the Route 53 service that you configured for your cluster.
      6. Enter a descriptive name for your cluster.
      7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Change to the directory that contains the installation program and initialize the cluster deployment:

   $ ./openshift-install create cluster --dir <installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Example output

   ...
   INFO Install complete!
   INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
   INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
   INFO Login to the console with user: "kubeadmin", and password: "4vYBz-Ee6gm-ymBZj-Wt5AL"
   INFO Time elapsed: 36m22s

   Note

   The cluster access and credential information also outputs to <installation_directory>/.openshift_install.log when an installation succeeds.

   Important
   • The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
   • It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

2. Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

   Note

   The elevated permissions provided by the AdministratorAccess policy are required only during installation.

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Linux Client entry and save the file.

4. Unpack the archive:

   $ tar xvzf <file>

5. Place the oc binary in a directory that is on your PATH.

   To check your PATH, execute the following command:

   $ echo $PATH

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 Windows Client entry and save the file.
4. Unzip the archive with a ZIP program.

5. Move the oc binary to a directory that is on your PATH.

   To check your PATH, open the command prompt and execute the following command:

   C:\> path

Procedure

1. Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
2. Select the appropriate version in the Version drop-down menu.
3. Click Download Now next to the OpenShift v4.8 MacOSX Client entry and save the file.
4. Unpack and unzip the archive.

5. Move the oc binary to a directory on your PATH.

   To check your PATH, open a terminal and execute the following command:

   $ echo $PATH

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami

   Example output

   system:admin

Procedure

1. Obtain the password for the kubeadmin user from the kubeadmin-password file on the installation host:

   $ cat <installation_directory>/auth/kubeadmin-password

   Note

   Alternatively, you can obtain the kubeadmin password from the <installation_directory>/.openshift_install.log log file on the installation host.

2. List the OpenShift Container Platform web console route:

   $ oc get routes -n openshift-console | grep 'console-openshift'

   Note

   Alternatively, you can obtain the OpenShift Container Platform route from the <installation_directory>/.openshift_install.log log file on the installation host.

   Example output

   console     console-openshift-console.apps.<cluster_name>.<base_domain>            console     https   reencrypt/Redirect   None

3. Navigate to the route detailed in the output of the preceding command in a web browser and log in as the kubeadmin user.

Procedure

1. If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   Note

   If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. View the public SSH key:

   $ cat <path>/<file_name>.pub

   For example, run the following to view the ~/.ssh/id_ed25519.pub public key:

   $ cat ~/.ssh/id_ed25519.pub

3. Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.

   Note

   On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.

   1. If the ssh-agent process is not already running for your local user, start it as a background task:

      $ eval "$(ssh-agent -s)"

      Example output

      Agent pid 31874

      Note

      If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

4. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

Procedure

1. Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
2. Select your infrastructure provider.

3. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.

4. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf openshift-install-linux.tar.gz

5. Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Change to the directory that contains the installation program and run the following command:

      $ ./openshift-install create install-config --dir <installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         Note

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select AWS as the platform to target.
      3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
      4. Select the AWS region to deploy the cluster to.
      5. Select the base domain for the Route 53 service that you configured for your cluster.
      6. Enter a descriptive name for your cluster.
      7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.