Questo contenuto non è disponibile nella lingua selezionata.
Chapter 11. Monitoring application health by using health checks
In software systems, components can become unhealthy due to transient issues such as temporary connectivity loss, configuration errors, or problems with external dependencies. OpenShift Container Platform applications have a number of options to detect and handle unhealthy containers.
11.1. Understanding health checks
A health check periodically performs diagnostics on a running container using any combination of the readiness, liveness, and startup health checks.
You can include one or more probes in the specification for the pod that contains the container which you want to perform the health checks.
If you want to add or edit health checks in an existing pod, you must edit the pod DeploymentConfig
object or use the Developer perspective in the web console. You cannot use the CLI to add or edit health checks for an existing pod.
- Readiness probe
A readiness probe determines if a container is ready to accept service requests. If the readiness probe fails for a container, the kubelet removes the pod from the list of available service endpoints.
After a failure, the probe continues to examine the pod. If the pod becomes available, the kubelet adds the pod to the list of available service endpoints.
- Liveness health check
A liveness probe determines if a container is still running. If the liveness probe fails due to a condition such as a deadlock, the kubelet kills the container. The pod then responds based on its restart policy.
For example, a liveness probe on a pod with a
restartPolicy
ofAlways
orOnFailure
kills and restarts the container.- Startup probe
A startup probe indicates whether the application within a container is started. All other probes are disabled until the startup succeeds. If the startup probe does not succeed within a specified time period, the kubelet kills the container, and the container is subject to the pod
restartPolicy
.Some applications can require additional startup time on their first initialization. You can use a startup probe with a liveness or readiness probe to delay that probe long enough to handle lengthy start-up time using the
failureThreshold
andperiodSeconds
parameters.For example, you can add a startup probe, with a
failureThreshold
of 30 failures and aperiodSeconds
of 10 seconds (30 * 10s = 300s) for a maximum of 5 minutes, to a liveness probe. After the startup probe succeeds the first time, the liveness probe takes over.
You can configure liveness, readiness, and startup probes with any of the following types of tests:
HTTP
GET
: When using an HTTPGET
test, the test determines the healthiness of the container by using a web hook. The test is successful if the HTTP response code is between200
and399
.You can use an HTTP
GET
test with applications that return HTTP status codes when completely initialized.-
Container Command: When using a container command test, the probe executes a command inside the container. The probe is successful if the test exits with a
0
status. - TCP socket: When using a TCP socket test, the probe attempts to open a socket to the container. The container is only considered healthy if the probe can establish a connection. You can use a TCP socket test with applications that do not start listening until initialization is complete.
You can configure several fields to control the behavior of a probe:
-
initialDelaySeconds
: The time, in seconds, after the container starts before the probe can be scheduled. The default is 0. -
periodSeconds
: The delay, in seconds, between performing probes. The default is10
. This value must be greater thantimeoutSeconds
. -
timeoutSeconds
: The number of seconds of inactivity after which the probe times out and the container is assumed to have failed. The default is1
. This value must be lower thanperiodSeconds
. -
successThreshold
: The number of times that the probe must report success after a failure to reset the container status to successful. The value must be1
for a liveness probe. The default is1
. failureThreshold
: The number of times that the probe is allowed to fail. The default is 3. After the specified attempts:- for a liveness probe, the container is restarted
-
for a readiness probe, the pod is marked
Unready
-
for a startup probe, the container is killed and is subject to the pod’s
restartPolicy
Example probes
The following are samples of different probes as they would appear in an object specification.
Sample readiness probe with a container command readiness probe in a pod spec
apiVersion: v1 kind: Pod metadata: labels: test: health-check name: my-application # ... spec: containers: - name: goproxy-app 1 args: image: registry.k8s.io/goproxy:0.1 2 readinessProbe: 3 exec: 4 command: 5 - cat - /tmp/healthy # ...
Sample container command startup probe and liveness probe with container command tests in a pod spec
apiVersion: v1 kind: Pod metadata: labels: test: health-check name: my-application # ... spec: containers: - name: goproxy-app 1 args: image: registry.k8s.io/goproxy:0.1 2 livenessProbe: 3 httpGet: 4 scheme: HTTPS 5 path: /healthz port: 8080 6 httpHeaders: - name: X-Custom-Header value: Awesome startupProbe: 7 httpGet: 8 path: /healthz port: 8080 9 failureThreshold: 30 10 periodSeconds: 10 11 # ...
- 1
- The container name.
- 2
- Specify the container image to deploy.
- 3
- A liveness probe.
- 4
- An HTTP
GET
test. - 5
- The internet scheme:
HTTP
orHTTPS
. The default value isHTTP
. - 6
- The port on which the container is listening.
- 7
- A startup probe.
- 8
- An HTTP
GET
test. - 9
- The port on which the container is listening.
- 10
- The number of times to try the probe after a failure.
- 11
- The number of seconds to perform the probe.
Sample liveness probe with a container command test that uses a timeout in a pod spec
apiVersion: v1 kind: Pod metadata: labels: test: health-check name: my-application # ... spec: containers: - name: goproxy-app 1 args: image: registry.k8s.io/goproxy:0.1 2 livenessProbe: 3 exec: 4 command: 5 - /bin/bash - '-c' - timeout 60 /opt/eap/bin/livenessProbe.sh periodSeconds: 10 6 successThreshold: 1 7 failureThreshold: 3 8 # ...
- 1
- The container name.
- 2
- Specify the container image to deploy.
- 3
- The liveness probe.
- 4
- The type of probe, here a container command probe.
- 5
- The command line to execute inside the container.
- 6
- How often in seconds to perform the probe.
- 7
- The number of consecutive successes needed to show success after a failure.
- 8
- The number of times to try the probe after a failure.
Sample readiness probe and liveness probe with a TCP socket test in a deployment
kind: Deployment apiVersion: apps/v1 metadata: labels: test: health-check name: my-application spec: # ... template: spec: containers: - resources: {} readinessProbe: 1 tcpSocket: port: 8080 timeoutSeconds: 1 periodSeconds: 10 successThreshold: 1 failureThreshold: 3 terminationMessagePath: /dev/termination-log name: ruby-ex livenessProbe: 2 tcpSocket: port: 8080 initialDelaySeconds: 15 timeoutSeconds: 1 periodSeconds: 10 successThreshold: 1 failureThreshold: 3 # ...
11.2. Configuring health checks using the CLI
To configure readiness, liveness, and startup probes, add one or more probes to the specification for the pod that contains the container which you want to perform the health checks
If you want to add or edit health checks in an existing pod, you must edit the pod DeploymentConfig
object or use the Developer perspective in the web console. You cannot use the CLI to add or edit health checks for an existing pod.
Procedure
To add probes for a container:
Create a
Pod
object to add one or more probes:apiVersion: v1 kind: Pod metadata: labels: test: health-check name: my-application spec: containers: - name: my-container 1 args: image: registry.k8s.io/goproxy:0.1 2 livenessProbe: 3 tcpSocket: 4 port: 8080 5 initialDelaySeconds: 15 6 periodSeconds: 20 7 timeoutSeconds: 10 8 readinessProbe: 9 httpGet: 10 host: my-host 11 scheme: HTTPS 12 path: /healthz port: 8080 13 startupProbe: 14 exec: 15 command: 16 - cat - /tmp/healthy failureThreshold: 30 17 periodSeconds: 20 18 timeoutSeconds: 10 19
- 1
- Specify the container name.
- 2
- Specify the container image to deploy.
- 3
- Optional: Create a Liveness probe.
- 4
- Specify a test to perform, here a TCP Socket test.
- 5
- Specify the port on which the container is listening.
- 6
- Specify the time, in seconds, after the container starts before the probe can be scheduled.
- 7
- Specify the number of seconds to perform the probe. The default is
10
. This value must be greater thantimeoutSeconds
. - 8
- Specify the number of seconds of inactivity after which the probe is assumed to have failed. The default is
1
. This value must be lower thanperiodSeconds
. - 9
- Optional: Create a Readiness probe.
- 10
- Specify the type of test to perform, here an HTTP test.
- 11
- Specify a host IP address. When
host
is not defined, thePodIP
is used. - 12
- Specify
HTTP
orHTTPS
. Whenscheme
is not defined, theHTTP
scheme is used. - 13
- Specify the port on which the container is listening.
- 14
- Optional: Create a Startup probe.
- 15
- Specify the type of test to perform, here an Container Execution probe.
- 16
- Specify the commands to execute on the container.
- 17
- Specify the number of times to try the probe after a failure.
- 18
- Specify the number of seconds to perform the probe. The default is
10
. This value must be greater thantimeoutSeconds
. - 19
- Specify the number of seconds of inactivity after which the probe is assumed to have failed. The default is
1
. This value must be lower thanperiodSeconds
.
NoteIf the
initialDelaySeconds
value is lower than theperiodSeconds
value, the first Readiness probe occurs at some point between the two periods due to an issue with timers.The
timeoutSeconds
value must be lower than theperiodSeconds
value.Create the
Pod
object:$ oc create -f <file-name>.yaml
Verify the state of the health check pod:
$ oc describe pod my-application
Example output
Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal Scheduled 9s default-scheduler Successfully assigned openshift-logging/liveness-exec to ip-10-0-143-40.ec2.internal Normal Pulling 2s kubelet, ip-10-0-143-40.ec2.internal pulling image "registry.k8s.io/liveness" Normal Pulled 1s kubelet, ip-10-0-143-40.ec2.internal Successfully pulled image "registry.k8s.io/liveness" Normal Created 1s kubelet, ip-10-0-143-40.ec2.internal Created container Normal Started 1s kubelet, ip-10-0-143-40.ec2.internal Started container
The following is the output of a failed probe that restarted a container:
Sample Liveness check output with unhealthy container
$ oc describe pod pod1
Example output
.... Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal Scheduled <unknown> Successfully assigned aaa/liveness-http to ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Normal AddedInterface 47s multus Add eth0 [10.129.2.11/23] Normal Pulled 46s kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Successfully pulled image "registry.k8s.io/liveness" in 773.406244ms Normal Pulled 28s kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Successfully pulled image "registry.k8s.io/liveness" in 233.328564ms Normal Created 10s (x3 over 46s) kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Created container liveness Normal Started 10s (x3 over 46s) kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Started container liveness Warning Unhealthy 10s (x6 over 34s) kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Liveness probe failed: HTTP probe failed with statuscode: 500 Normal Killing 10s (x2 over 28s) kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Container liveness failed liveness probe, will be restarted Normal Pulling 10s (x3 over 47s) kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Pulling image "registry.k8s.io/liveness" Normal Pulled 10s kubelet, ci-ln-37hz77b-f76d1-wdpjv-worker-b-snzrj Successfully pulled image "registry.k8s.io/liveness" in 244.116568ms
11.3. Monitoring application health using the Developer perspective
You can use the Developer perspective to add three types of health probes to your container to ensure that your application is healthy:
- Use the Readiness probe to check if the container is ready to handle requests.
- Use the Liveness probe to check if the container is running.
- Use the Startup probe to check if the application within the container has started.
You can add health checks either while creating and deploying an application, or after you have deployed an application.
11.4. Editing health checks using the Developer perspective
You can use the Topology view to edit health checks added to your application, modify them, or add more health checks.
Prerequisites
- You have switched to the Developer perspective in the web console.
- You have created and deployed an application on OpenShift Container Platform using the Developer perspective.
- You have added health checks to your application.
Procedure
- In the Topology view, right-click your application and select Edit Health Checks. Alternatively, in the side panel, click the Actions drop-down list and select Edit Health Checks.
In the Edit Health Checks page:
- To remove a previously added health probe, click the Remove icon adjoining it.
To edit the parameters of an existing probe:
- Click the Edit Probe link next to a previously added probe to see the parameters for the probe.
- Modify the parameters as required, and click the check mark to save your changes.
To add a new health probe, in addition to existing health checks, click the add probe links. For example, to add a Liveness probe that checks if your container is running:
- Click Add Liveness Probe, to see a form containing the parameters for the probe.
Edit the probe parameters as required.
NoteThe
Timeout
value must be lower than thePeriod
value. TheTimeout
default value is1
. ThePeriod
default value is10
.- Click the check mark at the bottom of the form. The Liveness Probe Added message is displayed.
- Click Save to save your modifications and add the additional probes to your container. You are redirected to the Topology view.
- In the side panel, verify that the probes have been added by clicking on the deployed pod under the Pods section.
- In the Pod Details page, click the listed container in the Containers section.
-
In the Container Details page, verify that the Liveness probe -
HTTP Get 10.129.4.65:8080/
has been added to the container, in addition to the earlier existing probes.
11.5. Monitoring health check failures using the Developer perspective
In case an application health check fails, you can use the Topology view to monitor these health check violations.
Prerequisites
- You have switched to the Developer perspective in the web console.
- You have created and deployed an application on OpenShift Container Platform using the Developer perspective.
- You have added health checks to your application.
Procedure
- In the Topology view, click on the application node to see the side panel.
- Click the Observe tab to see the health check failures in the Events (Warning) section.
- Click the down arrow adjoining Events (Warning) to see the details of the health check failure.
Additional resources
- For details on switching to the Developer perspective in the web console, see About the Developer perspective.
- For details on adding health checks while creating and deploying an application, see Advanced Options in the Creating applications using the Developer perspective section.