Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 4. External DNS Operator

4.1. External DNS Operator release notes
Copia collegamento

The External DNS Operator deploys and manages ExternalDNS to provide name resolution for services and routes from the external DNS provider to OpenShift Container Platform.

Important

The External DNS Operator is only supported on the x86_64 architecture.

These release notes track the development of the External DNS Operator in OpenShift Container Platform.

4.1.1. External DNS Operator 1.3.0
Copia collegamento

The following advisory is available for the External DNS Operator version 1.3.0:

This update includes a rebase to the 0.14.2 version of the upstream project.

4.1.1.1. Bug fixes
Copia collegamento

Previously, the ExternalDNS Operator could not deploy operands on HCP clusters. With this release, the Operator deploys operands in a running and ready state. (OCPBUGS-37059)

Previously, the ExternalDNS Operator was not using RHEL 9 as its building or base images. With this release, RHEL9 is the base. (OCPBUGS-41683)

Previously, the godoc had a broken link for Infoblox provider. With this release, the godoc is revised for accuracy. Some links are removed while some other are replaced with GitHub permalinks. (OCPBUGS-36797)

4.1.2. External DNS Operator 1.2.0
Copia collegamento

The following advisory is available for the External DNS Operator version 1.2.0:

4.1.2.1. New features
Copia collegamento

4.1.2.2. Bug fixes
Copia collegamento

  • The update strategy for the operand changed from Rolling to Recreate. (OCPBUGS-3630)

4.1.3. External DNS Operator 1.1.1
Copia collegamento

The following advisory is available for the External DNS Operator version 1.1.1:

4.1.4. External DNS Operator 1.1.0
Copia collegamento

This release included a rebase of the operand from the upstream project version 0.13.1. The following advisory is available for the External DNS Operator version 1.1.0:

4.1.4.1. Bug fixes
Copia collegamento

  • Previously, the ExternalDNS Operator enforced an empty defaultMode value for volumes, which caused constant updates due to a conflict with the OpenShift API. Now, the defaultMode value is not enforced and operand deployment does not update constantly. (OCPBUGS-2793)

4.1.5. External DNS Operator 1.0.1
Copia collegamento

The following advisory is available for the External DNS Operator version 1.0.1:

4.1.6. External DNS Operator 1.0.0
Copia collegamento

The following advisory is available for the External DNS Operator version 1.0.0:

4.1.6.1. Bug fixes
Copia collegamento

  • Previously, the External DNS Operator issued a warning about the violation of the restricted SCC policy during ExternalDNS operand pod deployments. This issue has been resolved. (BZ#2086408)

4.2. Understanding the External DNS Operator
Copia collegamento

The External DNS Operator deploys and manages ExternalDNS to provide the name resolution for services and routes from the external DNS provider to OpenShift Container Platform.

4.2.1. External DNS Operator
Copia collegamento

The External DNS Operator implements the External DNS API from the olm.openshift.io API group. The External DNS Operator updates services, routes, and external DNS providers.

Prerequisites

  • You have installed the yq CLI tool.

Procedure

You can deploy the External DNS Operator on demand from the OperatorHub. Deploying the External DNS Operator creates a Subscription object.

  1. Check the name of an install plan, such as install-zcvlr, by running the following command: 

    $ oc -n external-dns-operator get sub external-dns-operator -o yaml | yq '.status.installplan.name'
    Copy to Clipboard Toggle word wrap

  2. Check if the status of an install plan is Complete by running the following command: 

    $ oc -n external-dns-operator get ip <install_plan_name> -o yaml | yq '.status.phase'
    Copy to Clipboard Toggle word wrap

  3. View the status of the external-dns-operator deployment by running the following command: 

    $ oc get -n external-dns-operator deployment/external-dns-operator
    Copy to Clipboard Toggle word wrap

    Example output

    NAME                    READY     UP-TO-DATE   AVAILABLE   AGE
external-dns-operator   1/1       1            1           23h
    Copy to Clipboard Toggle word wrap

4.2.2. Viewing External DNS Operator logs
Copia collegamento

You can view External DNS Operator logs by using the oc logs command.

Procedure

  1. View the logs of the External DNS Operator by running the following command: 

    $ oc logs -n external-dns-operator deployment/external-dns-operator -c external-dns-operator
    Copy to Clipboard Toggle word wrap

4.2.2.1. External DNS Operator domain name limitations
Copia collegamento

The External DNS Operator uses the TXT registry which adds the prefix for TXT records. This reduces the maximum length of the domain name for TXT records. A DNS record cannot be present without a corresponding TXT record, so the domain name of the DNS record must follow the same limit as the TXT records. For example, a DNS record of <domain_name_from_source> results in a TXT record of external-dns-<record_type>-<domain_name_from_source>.

The domain name of the DNS records generated by the External DNS Operator has the following limitations:

Expand
Record typeNumber of characters

CNAME

44

Wildcard CNAME records on AzureDNS

42

A

48

Wildcard A records on AzureDNS

46

The following error appears in the External DNS Operator logs if the generated domain name exceeds any of the domain name limitations: 

time="2022-09-02T08:53:57Z" level=error msg="Failure in zone test.example.io. [Id: /hostedzone/Z06988883Q0H0RL6UMXXX]"
time="2022-09-02T08:53:57Z" level=error msg="InvalidChangeBatch: [FATAL problem: DomainLabelTooLong (Domain label is too long) encountered with 'external-dns-a-hello-openshift-aaaaaaaaaa-bbbbbbbbbb-ccccccc']\n\tstatus code: 400, request id: e54dfd5a-06c6-47b0-bcb9-a4f7c3a4e0c6"
Copy to Clipboard Toggle word wrap

4.3. Installing the External DNS Operator
Copia collegamento

You can install the External DNS Operator on cloud providers such as AWS, Azure, and GCP.

4.3.1. Installing the External DNS Operator with OperatorHub
Copia collegamento

You can install the External DNS Operator by using the OpenShift Container Platform OperatorHub.

Procedure

  1. Click Operators OperatorHub in the OpenShift Container Platform web console.
  2. Click External DNS Operator. You can use the Filter by keyword text box or the filter list to search for External DNS Operator from the list of Operators.
  3. Select the external-dns-operator namespace.
  4. On the External DNS Operator page, click Install.

  5. On the Install Operator page, ensure that you selected the following options:

    1. Update the channel as stable-v1.
    2. Installation mode as A specific name on the cluster.
    3. Installed namespace as external-dns-operator. If namespace external-dns-operator does not exist, it gets created during the Operator installation.
    4. Select Approval Strategy as Automatic or Manual. Approval Strategy is set to Automatic by default.
    5. Click Install.

If you select Automatic updates, the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.

If you select Manual updates, the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to have the Operator updated to the new version.

Verification

Verify that the External DNS Operator shows the Status as Succeeded on the Installed Operators dashboard.

4.3.2. Installing the External DNS Operator by using the CLI
Copia collegamento

You can install the External DNS Operator by using the CLI.

Prerequisites

  • You are logged in to the OpenShift Container Platform web console as a user with cluster-admin permissions.
  • You are logged into the OpenShift CLI (oc).

Procedure

  1. Create a Namespace object:

    1. Create a YAML file that defines the Namespace object:

      Example namespace.yaml file

      apiVersion: v1
kind: Namespace
metadata:
  name: external-dns-operator
      Copy to Clipboard Toggle word wrap

    2. Create the Namespace object by running the following command: 

      $ oc apply -f namespace.yaml
      Copy to Clipboard Toggle word wrap

  2. Create an OperatorGroup object:

    1. Create a YAML file that defines the OperatorGroup object:

      Example operatorgroup.yaml file

      apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: external-dns-operator
  namespace: external-dns-operator
spec:
  upgradeStrategy: Default
  targetNamespaces:
  - external-dns-operator
      Copy to Clipboard Toggle word wrap

    2. Create the OperatorGroup object by running the following command: 

      $ oc apply -f operatorgroup.yaml
      Copy to Clipboard Toggle word wrap

  3. Create a Subscription object:

    1. Create a YAML file that defines the Subscription object:

      Example subscription.yaml file

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: external-dns-operator
  namespace: external-dns-operator
spec:
  channel: stable-v1
  installPlanApproval: Automatic
  name: external-dns-operator
  source: redhat-operators
  sourceNamespace: openshift-marketplace
      Copy to Clipboard Toggle word wrap

    2. Create the Subscription object by running the following command: 

      $ oc apply -f subscription.yaml
      Copy to Clipboard Toggle word wrap

Verification

  1. Get the name of the install plan from the subscription by running the following command: 

    $ oc -n external-dns-operator \
  get subscription external-dns-operator \
  --template='{{.status.installplan.name}}{{"\n"}}'
    Copy to Clipboard Toggle word wrap

  2. Verify that the status of the install plan is Complete by running the following command: 

    $ oc -n external-dns-operator \
  get ip <install_plan_name> \
  --template='{{.status.phase}}{{"\n"}}'
    Copy to Clipboard Toggle word wrap

  3. Verify that the status of the external-dns-operator pod is Running by running the following command: 

    $ oc -n external-dns-operator get pod
    Copy to Clipboard Toggle word wrap

    Example output

    NAME                                     READY   STATUS    RESTARTS   AGE
external-dns-operator-5584585fd7-5lwqm   2/2     Running   0          11m
    Copy to Clipboard Toggle word wrap

  4. Verify that the catalog source of the subscription is redhat-operators by running the following command: 

    $ oc -n external-dns-operator get subscription
    Copy to Clipboard Toggle word wrap

  5. Check the external-dns-operator version by running the following command: 

    $ oc -n external-dns-operator get csv
    Copy to Clipboard Toggle word wrap

4.4. External DNS Operator configuration parameters
Copia collegamento

The External DNS Operator includes the following configuration parameters.

4.4.1. External DNS Operator configuration parameters
Copia collegamento

The External DNS Operator includes the following configuration parameters:

Expand
ParameterDescription

spec

Enables the type of a cloud provider. 

spec:
  provider:
    type: AWS
1 

    aws:
      credentials:
        name: aws-access-key
2
Copy to Clipboard Toggle word wrap
1
Defines available options such as AWS, GCP, Azure, and Infoblox.
2
Defines a secret name for your cloud provider.

zones

Enables you to specify DNS zones by their domains. If you do not specify zones, the ExternalDNS resource discovers all of the zones present in your cloud provider account. 

zones:
- "myzoneid"
1
Copy to Clipboard Toggle word wrap
1
Specifies the name of DNS zones.

domains

Enables you to specify AWS zones by their domains. If you do not specify domains, the ExternalDNS resource discovers all of the zones present in your cloud provider account. 

domains:
- filterType: Include
1 

  matchType: Exact
2 

  name: "myzonedomain1.com"
3 

- filterType: Include
  matchType: Pattern
4 

  pattern: ".*\\.otherzonedomain\\.com"
5
Copy to Clipboard Toggle word wrap
1
Ensures that the ExternalDNS resource includes the domain name.
2
Instructs ExternalDNS that the domain matching has to be exact as opposed to regular expression match.
3
Defines the name of the domain.
4
Sets the regex-domain-filter flag in the ExternalDNS resource. You can limit possible domains by using a Regex filter.
5
Defines the regex pattern to be used by the ExternalDNS resource to filter the domains of the target zones.

source

Enables you to specify the source for the DNS records, Service or Route. 

source:
1 

  type: Service
2 

  service:
    serviceType:
3 

      - LoadBalancer
      - ClusterIP
  labelFilter:
4 

    matchLabels:
      external-dns.mydomain.org/publish: "yes"
  hostnameAnnotation: "Allow"
5 

  fqdnTemplate:
  - "{{.Name}}.myzonedomain.com"
6
Copy to Clipboard Toggle word wrap
1
Defines the settings for the source of DNS records.
2
The ExternalDNS resource uses the Service type as the source for creating DNS records.
3
Sets the service-type-filter flag in the ExternalDNS resource. The serviceType contains the following fields:
  • default: LoadBalancer
  • expected: ClusterIP
  • NodePort
  • LoadBalancer
  • ExternalName
4
Ensures that the controller considers only those resources which matches with label filter.
5
The default value for hostnameAnnotation is Ignore which instructs ExternalDNS to generate DNS records using the templates specified in the field fqdnTemplates. When the value is Allow the DNS records get generated based on the value specified in the external-dns.alpha.kubernetes.io/hostname annotation.
6
The External DNS Operator uses a string to generate DNS names from sources that do not define a hostname, or to add a hostname suffix when paired with the fake source. 
source:
  type: OpenShiftRoute
1 

  openshiftRouteOptions:
    routerName: default
2 

    labelFilter:
      matchLabels:
        external-dns.mydomain.org/publish: "yes"
Copy to Clipboard Toggle word wrap
1
Creates DNS records.
2
If the source type is OpenShiftRoute, then you can pass the Ingress Controller name. The ExternalDNS resource uses the canonical name of the Ingress Controller as the target for CNAME records.

4.5. Creating DNS records on AWS
Copia collegamento

You can create DNS records on AWS and AWS GovCloud by using the External DNS Operator.

You can create DNS records on a public hosted zone for AWS by using the Red Hat External DNS Operator. You can use the same instructions to create DNS records on a hosted zone for AWS GovCloud.

Procedure

  1. Check the user profile, such as system:admin, by running the following command. The user profile must have access to the kube-system namespace. If you do not have the credentials, you can fetch the credentials from the kube-system namespace to use the cloud provider client by running the following command: 

    $ oc whoami
    Copy to Clipboard Toggle word wrap

  2. Fetch the values from aws-creds secret present in kube-system namespace. 

    $ export AWS_ACCESS_KEY_ID=$(oc get secrets aws-creds -n kube-system  --template={{.data.aws_access_key_id}} | base64 -d)
    Copy to Clipboard Toggle word wrap 
    $ export AWS_SECRET_ACCESS_KEY=$(oc get secrets aws-creds -n kube-system  --template={{.data.aws_secret_access_key}} | base64 -d)
    Copy to Clipboard Toggle word wrap

  3. Get the routes to check the domain: 

    $ oc get routes --all-namespaces | grep console
    Copy to Clipboard Toggle word wrap

    Example output

    openshift-console          console             console-openshift-console.apps.testextdnsoperator.apacshift.support                       console             https   reencrypt/Redirect     None
openshift-console          downloads           downloads-openshift-console.apps.testextdnsoperator.apacshift.support                     downloads           http    edge/Redirect          None
    Copy to Clipboard Toggle word wrap

  4. Get the list of DNS zones and find the DNS zone that corresponds to the domain of the route that you previously queried: 

    $ aws route53 list-hosted-zones | grep testextdnsoperator.apacshift.support
    Copy to Clipboard Toggle word wrap

    Example output

    HOSTEDZONES	terraform	/hostedzone/Z02355203TNN1XXXX1J6O	testextdnsoperator.apacshift.support.	5
    Copy to Clipboard Toggle word wrap

  5. Create ExternalDNS resource for route source: 

    $ cat <<EOF | oc create -f -
apiVersion: externaldns.olm.openshift.io/v1beta1
kind: ExternalDNS
metadata:
  name: sample-aws
    1 
    
spec:
  domains:
  - filterType: Include
    2 
    
    matchType: Exact
    3 
    
    name: testextdnsoperator.apacshift.support
    4 
    
  provider:
    type: AWS
    5 
    
  source:
    6 
    
    type: OpenShiftRoute
    7 
    
    openshiftRouteOptions:
      routerName: default
    8 
    
EOF
    Copy to Clipboard Toggle word wrap
    1
    Defines the name of external DNS resource.
    2
    By default all hosted zones are selected as potential targets. You can include a hosted zone that you need.
    3
    The matching of the target zone’s domain has to be exact (as opposed to regular expression match).
    4
    Specify the exact domain of the zone you want to update. The hostname of the routes must be subdomains of the specified domain.
    5
    Defines the AWS Route53 DNS provider.
    6
    Defines options for the source of DNS records.
    7
    Defines OpenShift route resource as the source for the DNS records which gets created in the previously specified DNS provider.
    8
    If the source is OpenShiftRoute, then you can pass the OpenShift Ingress Controller name. External DNS Operator selects the canonical hostname of that router as the target while creating CNAME record.

  6. Check the records created for OCP routes using the following command: 

    $ aws route53 list-resource-record-sets --hosted-zone-id Z02355203TNN1XXXX1J6O --query "ResourceRecordSets[?Type == 'CNAME']" | grep console
    Copy to Clipboard Toggle word wrap

4.5.2. Creating DNS records in a different AWS Account using a shared VPC
Copia collegamento

You can use the ExternalDNS Operator to create DNS records in a different AWS account using a shared Virtual Private Cloud (VPC). By using a shared VPC, an organization can connect resources from multiple projects to a common VPC network. Organizations can then use VPC sharing to use a single Route 53 instance across multiple AWS accounts.

Prerequisites

  • You have created two Amazon AWS accounts: one with a VPC and a Route 53 private hosted zone configured (Account A), and another for installing a cluster (Account B).
  • You have created an IAM Policy and IAM Role with the appropriate permissions in Account A for Account B to create DNS records in the Route 53 hosted zone of Account A.
  • You have installed a cluster in Account B into the existing VPC for Account A.
  • You have installed the ExternalDNS Operator in the cluster in Account B.

Procedure

  1. Get the Role ARN of the IAM Role that you created to allow Account B to access Account A’s Route 53 hosted zone by running the following command: 

    $ aws --profile account-a iam get-role --role-name user-rol1 | head -1
    Copy to Clipboard Toggle word wrap

    Example output

    ROLE	arn:aws:iam::1234567890123:role/user-rol1	2023-09-14T17:21:54+00:00	3600	/	AROA3SGB2ZRKRT5NISNJN	user-rol1
    Copy to Clipboard Toggle word wrap

  2. Locate the private hosted zone to use with Account A’s credentials by running the following command: 

    $ aws --profile account-a route53 list-hosted-zones | grep testextdnsoperator.apacshift.support
    Copy to Clipboard Toggle word wrap

    Example output

    HOSTEDZONES	terraform	/hostedzone/Z02355203TNN1XXXX1J6O	testextdnsoperator.apacshift.support. 5
    Copy to Clipboard Toggle word wrap

  3. Create the ExternalDNS object by running the following command: 

    $ cat <<EOF | oc create -f -
apiVersion: externaldns.olm.openshift.io/v1beta1
kind: ExternalDNS
metadata:
  name: sample-aws
spec:
  domains:
  - filterType: Include
    matchType: Exact
    name: testextdnsoperator.apacshift.support
  provider:
    type: AWS
    aws:
      assumeRole:
        arn: arn:aws:iam::12345678901234:role/user-rol1
    1 
    
  source:
    type: OpenShiftRoute
    openshiftRouteOptions:
      routerName: default
EOF
    Copy to Clipboard Toggle word wrap
    1
    Specify the Role ARN to have DNS records created in Account A.

  4. Check the records created for OpenShift Container Platform (OCP) routes by using the following command: 

    $ aws --profile account-a route53 list-resource-record-sets --hosted-zone-id Z02355203TNN1XXXX1J6O --query "ResourceRecordSets[?Type == 'CNAME']" | grep console-openshift-console
    Copy to Clipboard Toggle word wrap

4.6. Creating DNS records on Azure
Copia collegamento

You can create DNS records on Azure by using the External DNS Operator.

Important

Using the External DNS Operator on a Microsoft Entra Workload ID-enabled cluster or a cluster that runs in Microsoft Azure Government (MAG) regions is not supported.

4.6.1. Creating DNS records on an Azure public DNS zone
Copia collegamento

You can create DNS records on a public DNS zone for Azure by using the External DNS Operator.

Prerequisites

  • You must have administrator privileges.
  • The admin user must have access to the kube-system namespace.

Procedure

  1. Fetch the credentials from the kube-system namespace to use the cloud provider client by running the following command: 

    $ CLIENT_ID=$(oc get secrets azure-credentials  -n kube-system  --template={{.data.azure_client_id}} | base64 -d)
$ CLIENT_SECRET=$(oc get secrets azure-credentials  -n kube-system  --template={{.data.azure_client_secret}} | base64 -d)
$ RESOURCE_GROUP=$(oc get secrets azure-credentials  -n kube-system  --template={{.data.azure_resourcegroup}} | base64 -d)
$ SUBSCRIPTION_ID=$(oc get secrets azure-credentials  -n kube-system  --template={{.data.azure_subscription_id}} | base64 -d)
$ TENANT_ID=$(oc get secrets azure-credentials  -n kube-system  --template={{.data.azure_tenant_id}} | base64 -d)
    Copy to Clipboard Toggle word wrap

  2. Log in to Azure by running the following command: 

    $ az login --service-principal -u "${CLIENT_ID}" -p "${CLIENT_SECRET}" --tenant "${TENANT_ID}"
    Copy to Clipboard Toggle word wrap

  3. Get a list of routes by running the following command: 

    $ oc get routes --all-namespaces | grep console
    Copy to Clipboard Toggle word wrap

    Example output

    openshift-console          console             console-openshift-console.apps.test.azure.example.com                       console             https   reencrypt/Redirect     None
openshift-console          downloads           downloads-openshift-console.apps.test.azure.example.com                     downloads           http    edge/Redirect          None
    Copy to Clipboard Toggle word wrap

  4. Get a list of DNS zones by running the following command: 

    $ az network dns zone list --resource-group "${RESOURCE_GROUP}"
    Copy to Clipboard Toggle word wrap

  5. Create a YAML file, for example, external-dns-sample-azure.yaml, that defines the ExternalDNS object:

    Example external-dns-sample-azure.yaml file

    apiVersion: externaldns.olm.openshift.io/v1beta1
kind: ExternalDNS
metadata:
  name: sample-azure
    1 
    
spec:
  zones:
  - "/subscriptions/1234567890/resourceGroups/test-azure-xxxxx-rg/providers/Microsoft.Network/dnszones/test.azure.example.com"
    2 
    
  provider:
    type: Azure
    3 
    
  source:
    openshiftRouteOptions:
    4 
    
      routerName: default
    5 
    
    type: OpenShiftRoute
    6
    Copy to Clipboard Toggle word wrap

    1
    Specifies the External DNS name.
    2
    Defines the zone ID.
    3
    Defines the provider type.
    4
    You can define options for the source of DNS records.
    5
    If the source type is OpenShiftRoute, you can pass the OpenShift Ingress Controller name. External DNS selects the canonical hostname of that router as the target while creating CNAME record.
    6
    Defines the route resource as the source for the Azure DNS records.

  6. Check the DNS records created for OpenShift Container Platform routes by running the following command: 

    $ az network dns record-set list -g "${RESOURCE_GROUP}"  -z test.azure.example.com | grep console
    Copy to Clipboard Toggle word wrap
    Note

    To create records on private hosted zones on private Azure DNS, you need to specify the private zone under the zones field which populates the provider type to azure-private-dns in the ExternalDNS container arguments.

4.7. Creating DNS records on GCP
Copia collegamento

You can create DNS records on Google Cloud Platform (GCP) by using the External DNS Operator.

Important

Using the External DNS Operator on a cluster with GCP Workload Identity enabled is not supported. For more information about the GCP Workload Identity, see GCP Workload Identity.

4.7.1. Creating DNS records on a public managed zone for GCP
Copia collegamento

You can create DNS records on a public managed zone for GCP by using the External DNS Operator.

Prerequisites

  • You must have administrator privileges.

Procedure

  1. Copy the gcp-credentials secret in the encoded-gcloud.json file by running the following command: 

    $ oc get secret gcp-credentials -n kube-system --template='{{$v := index .data "service_account.json"}}{{$v}}' | base64 -d - > decoded-gcloud.json
    Copy to Clipboard Toggle word wrap

  2. Export your Google credentials by running the following command: 

    $ export GOOGLE_CREDENTIALS=decoded-gcloud.json
    Copy to Clipboard Toggle word wrap

  3. Activate your account by using the following command: 

    $ gcloud auth activate-service-account  <client_email as per decoded-gcloud.json> --key-file=decoded-gcloud.json
    Copy to Clipboard Toggle word wrap

  4. Set your project by running the following command: 

    $ gcloud config set project <project_id as per decoded-gcloud.json>
    Copy to Clipboard Toggle word wrap

  5. Get a list of routes by running the following command: 

    $ oc get routes --all-namespaces | grep console
    Copy to Clipboard Toggle word wrap

    Example output

    openshift-console          console             console-openshift-console.apps.test.gcp.example.com                       console             https   reencrypt/Redirect     None
openshift-console          downloads           downloads-openshift-console.apps.test.gcp.example.com                     downloads           http    edge/Redirect          None
    Copy to Clipboard Toggle word wrap

  6. Get a list of managed zones, such as qe-cvs4g-private-zone test.gcp.example.com, by running the following command: 

    $ gcloud dns managed-zones list | grep test.gcp.example.com
    Copy to Clipboard Toggle word wrap

  7. Create a YAML file, for example, external-dns-sample-gcp.yaml, that defines the ExternalDNS object:

    Example external-dns-sample-gcp.yaml file

    apiVersion: externaldns.olm.openshift.io/v1beta1
kind: ExternalDNS
metadata:
  name: sample-gcp
    1 
    
spec:
  domains:
    - filterType: Include
    2 
    
      matchType: Exact
    3 
    
      name: test.gcp.example.com
    4 
    
  provider:
    type: GCP
    5 
    
  source:
    openshiftRouteOptions:
    6 
    
      routerName: default
    7 
    
    type: OpenShiftRoute
    8
    Copy to Clipboard Toggle word wrap

    1
    Specifies the External DNS name.
    2
    By default, all hosted zones are selected as potential targets. You can include your hosted zone.
    3
    The domain of the target must match the string defined by the name key.
    4
    Specify the exact domain of the zone you want to update. The hostname of the routes must be subdomains of the specified domain.
    5
    Defines the provider type.
    6
    You can define options for the source of DNS records.
    7
    If the source type is OpenShiftRoute, you can pass the OpenShift Ingress Controller name. External DNS selects the canonical hostname of that router as the target while creating CNAME record.
    8
    Defines the route resource as the source for GCP DNS records.

  8. Check the DNS records created for OpenShift Container Platform routes by running the following command: 

    $ gcloud dns record-sets list --zone=qe-cvs4g-private-zone | grep console
    Copy to Clipboard Toggle word wrap

4.8. Creating DNS records on Infoblox
Copia collegamento

You can create DNS records on Infoblox by using the External DNS Operator.

4.8.1. Creating DNS records on a public DNS zone on Infoblox
Copia collegamento

You can create DNS records on a public DNS zone on Infoblox by using the External DNS Operator.

Prerequisites

  • You have access to the OpenShift CLI (oc).
  • You have access to the Infoblox UI.

Procedure

  1. Create a secret object with Infoblox credentials by running the following command: 

    $ oc -n external-dns-operator create secret generic infoblox-credentials --from-literal=EXTERNAL_DNS_INFOBLOX_WAPI_USERNAME=<infoblox_username> --from-literal=EXTERNAL_DNS_INFOBLOX_WAPI_PASSWORD=<infoblox_password>
    Copy to Clipboard Toggle word wrap

  2. Get a list of routes by running the following command: 

    $ oc get routes --all-namespaces | grep console
    Copy to Clipboard Toggle word wrap

    Example Output

    openshift-console          console             console-openshift-console.apps.test.example.com                       console             https   reencrypt/Redirect     None
openshift-console          downloads           downloads-openshift-console.apps.test.example.com                     downloads           http    edge/Redirect          None
    Copy to Clipboard Toggle word wrap

  3. Create a YAML file, for example, external-dns-sample-infoblox.yaml, that defines the ExternalDNS object:

    Example external-dns-sample-infoblox.yaml file

    apiVersion: externaldns.olm.openshift.io/v1beta1
kind: ExternalDNS
metadata:
  name: sample-infoblox
    1 
    
spec:
  provider:
    type: Infoblox
    2 
    
    infoblox:
      credentials:
        name: infoblox-credentials
      gridHost: ${INFOBLOX_GRID_PUBLIC_IP}
      wapiPort: 443
      wapiVersion: "2.3.1"
  domains:
  - filterType: Include
    matchType: Exact
    name: test.example.com
  source:
    type: OpenShiftRoute
    3 
    
    openshiftRouteOptions:
      routerName: default
    4
    Copy to Clipboard Toggle word wrap

    1
    Specifies the External DNS name.
    2
    Defines the provider type.
    3
    You can define options for the source of DNS records.
    4
    If the source type is OpenShiftRoute, you can pass the OpenShift Ingress Controller name. External DNS selects the canonical hostname of that router as the target while creating CNAME record.

  4. Create the ExternalDNS resource on Infoblox by running the following command: 

    $ oc create -f external-dns-sample-infoblox.yaml
    Copy to Clipboard Toggle word wrap

  5. From the Infoblox UI, check the DNS records created for console routes:

    1. Click Data Management DNS Zones.
    2. Select the zone name.

4.9. Configuring the cluster-wide proxy on the External DNS Operator
Copia collegamento

After configuring the cluster-wide proxy, the Operator Lifecycle Manager (OLM) triggers automatic updates to all of the deployed Operators with the new contents of the HTTP_PROXY, HTTPS_PROXY, and NO_PROXY environment variables.

4.9.1. Trusting the certificate authority of the cluster-wide proxy
Copia collegamento

You can configure the External DNS Operator to trust the certificate authority of the cluster-wide proxy.

Procedure

  1. Create the config map to contain the CA bundle in the external-dns-operator namespace by running the following command: 

    $ oc -n external-dns-operator create configmap trusted-ca
    Copy to Clipboard Toggle word wrap

  2. To inject the trusted CA bundle into the config map, add the config.openshift.io/inject-trusted-cabundle=true label to the config map by running the following command: 

    $ oc -n external-dns-operator label cm trusted-ca config.openshift.io/inject-trusted-cabundle=true
    Copy to Clipboard Toggle word wrap

  3. Update the subscription of the External DNS Operator by running the following command: 

    $ oc -n external-dns-operator patch subscription external-dns-operator --type='json' -p='[{"op": "add", "path": "/spec/config", "value":{"env":[{"name":"TRUSTED_CA_CONFIGMAP_NAME","value":"trusted-ca"}]}}]'
    Copy to Clipboard Toggle word wrap

Verification

  • After the deployment of the External DNS Operator is completed, verify that the trusted CA environment variable is added, outputted as trusted-ca, to the external-dns-operator deployment by running the following command: 

    $ oc -n external-dns-operator exec deploy/external-dns-operator -c external-dns-operator -- printenv TRUSTED_CA_CONFIGMAP_NAME
    Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat