Chapter 23. Handling Out of Resource Errors

This topic discusses best-effort attempts to prevent OpenShift Container Platform from experiencing out-of-memory (OOM) and out-of-disk-space conditions.

A node must maintain stability when available compute resources are low. This is especially important when dealing with incompressible resources such as memory or disk. If either resource is exhausted, the node becomes unstable.

Administrators can proactively monitor nodes for and prevent against situations where the node runs out of compute and memory resources using configurable eviction policies.

This topic also provides information on how OpenShift Container Platform handles out-of-resource conditions and provides an example scenario and recommended practices:

An eviction policy allows a node to fail one or more pods when the node is running low on available resources. Failing a pod allows the node to reclaim needed resources.

An eviction policy is a combination of an eviction trigger signal with a specific eviction threshold value that is set in the node configuration file or through the command line. Evictions can be either hard, where a node takes immediate action on a pod that exceeds a threshold, or soft, where a node allows a grace period before taking action.

By using well-configured eviction policies, a node can proactively monitor for and prevent against total starvation of a compute resource.

When detecting disk pressure, the node supports the nodefs and imagefs file system partitions.

The nodefs, or rootfs, is the file system that the node uses for local disk volumes, daemon logs, emptyDir, and so on (for example, the file system that provides /). The rootfs contains openshift.local.volumes, by default /var/lib/origin/openshift.local.volumes.

The imagefs is the file system that the container runtime uses for storing images and individual container-writable layers. Eviction thresholds are at 85% full for imagefs. The imagefs file system depends on the runtime and, in the case of Docker, which storage driver you are using.

kubeletArguments:
  eviction-hard: 1
  - memory.available<100Mi 2
  - nodefs.available<10%
  - nodefs.inodesFree<5%
  - imagefs.available<15%
  - imagefs.inodesFree<10%

kubeletArguments:
  eviction-soft: 1
  - memory.available<100Mi 2
  - nodefs.available<10%
  - nodefs.inodesFree<5%
  - imagefs.available<15%
  - imagefs.inodesFree<10%
  eviction-soft-grace-period:3
  - memory.available=1m30s
  - nodefs.available=1m30s
  - nodefs.inodesFree=1m30s
  - imagefs.available=1m30s
  - imagefs.inodesFree=1m30s

curl <certificate details> \
  https://<master>/api/v1/nodes/<node>/proxy/stats/summary

<eviction_signal><operator><quantity>

memory.available<1Gi
memory.available<10%

kubeletArguments:
  eviction-hard:
  - memory.available<500Mi
  - nodefs.available<500Mi
  - nodefs.inodesFree<100Mi
  - imagefs.available<100Mi
  - imagefs.inodesFree<100Mi

kubeletArguments:
  eviction-soft:
  - memory.available<500Mi
  - nodefs.available<500Mi
  - nodefs.inodesFree<100Mi
  - imagefs.available<100Mi
  - imagefs.inodesFree<100Mi
  eviction-soft-grace-period:
  - memory.available=1m30s
  - nodefs.available=1m30s
  - nodefs.inodesFree=1m30s
  - imagefs.available=1m30s
  - imagefs.inodesFree=1m30s

You can control how much of a node resource is made available for scheduling in order to allow the scheduler to fully allocate a node and to prevent evictions.

Set system-reserved equal to the amount of resource you want available to the scheduler for deploying pods and for system-daemons. Evictions should only occur if pods use more than their requested amount of an allocatable resource.

A node reports two values:

To configure the amount of allocatable resources:

If a node is oscillating above and below a soft eviction threshold, but not exceeding its associated grace period, the corresponding node condition oscillates between true and false, which can cause problems for the scheduler.

To prevent this oscillation, set the eviction-pressure-transition-period parameter to control how long the node must wait before transitioning out of a pressure condition.

kubeletArguments:
  eviction-pressure-transition-period="5m"

+ The node toggles the condition back to false when the node has not observed an eviction threshold being met for the specified pressure condition for the specified period.

+

If an eviction criteria is satisfied, the node initiates the process of reclaiming the pressured resource until the signal goes below the defined threshold. During this time, the node does not support scheduling any new pods.

The node attempts to reclaim node-level resources prior to evicting end-user pods, based on whether the host system has a dedicated imagefs configured for the container runtime.

With Imagefs

If the host system has imagefs:

Without Imagefs

If the host system does not have imagefs:

If an eviction threshold is met and the grace period is passed, the node initiates the process of evicting pods until the signal goes below the defined threshold.

The node ranks pods for eviction by their quality of service, and, among those with the same quality of service, by the consumption of the starved compute resource relative to the pod’s scheduling request.

Each QOS level has an OOM score, which the Linux out-of-memory tool (OOM killer) uses to determine which pods to kill. See Understanding Quality of Service and Out of Memory Killer below.

The following table lists each QOS level and the associated OOM score.

A Guaranteed pod will never be evicted because of another pod’s resource consumption unless a system daemon (such as node, docker, journald) is consuming more resources than were reserved using system-reserved, or kube-reserved allocations or if the node has only Guaranteed pods remaining.

If the node has only Guaranteed pods remaining, the node evicts a Guaranteed pod that least impacts node stability and limits the impact of the unexpected consumption to other Guaranteed pods.

Local disk is a BestEffort resource. If necessary, the node evicts pods one at a time to reclaim disk when DiskPressure is encountered. The node ranks pods by quality of service. If the node is responding to inode starvation, it will reclaim inodes by evicting pods with the lowest quality of service first. If the node is responding to lack of available disk, it will rank pods within a quality of service that consumes the largest amount of local disk, and evict those pods first.

% of node memory a container is using + `oom_score_adj` = `oom_score`

The scheduler views node conditions when placing additional pods on the node. For example, if the node has an eviction threshold like the following:

eviction-hard is "memory.available<500Mi"

and available memory falls below 500Mi, the node reports a value in Node.Status.Conditions as MemoryPressure as true.

Consider the following scenario.

An opertator:

Implicit in this configuration is the understanding that system-reserved should include the amount of memory covered by the eviction threshold.

To reach that capacity, either some pod is using more than its request, or the system is using more than 1Gi.

If a node has 10 Gi of capacity, and you want to reserve 10% of that capacity for the system daemons (system-reserved), perform the following calculation:

capacity = 10 Gi
system-reserved = 10 Gi * .1 = 1 Gi

The amount of allocatable resources becomes:

allocatable = capacity - system-reserved = 9 Gi

This means by default, the scheduler will schedule pods that request 9 Gi of memory to that node.

If you want to turn on eviction so that eviction is triggered when the node observes that available memory falls below 10% of capacity for 30 seconds, or immediately when it falls below 5% of capacity, you need the scheduler to see allocatable as 8Gi. Therefore, ensure your system reservation covers the greater of your eviction thresholds.

capacity = 10 Gi
eviction-threshold = 10 Gi * .1 = 1 Gi
system-reserved = (10Gi * .1) + eviction-threshold = 2 Gi
allocatable = capacity - system-reserved = 8 Gi

Enter the following in the node-config.yaml:

kubeletArguments:
  system-reserved:
  - "memory=2Gi"
  eviction-hard:
  - "memory.available<.5Gi"
  eviction-soft:
  - "memory.available<1Gi"
  eviction-soft-grace-period:
  - "memory.available=30s"

This configuration ensures that the scheduler does not place pods on a node that immediately induce memory pressure and trigger eviction assuming those pods use less than their configured request.