3.2. Configuring IP Networking with nmtui

As a system administrator, you can configure a network interface using the NetworkManager's tool, nmtui. See Section 2.5, “NetworkManager Tools”.

This procedure describes how to configure networking using the text user interface tool, nmtui.

Prerequisites

The nmtui tool is used in a terminal window. It is contained in the NetworkManager-tui package, but it is not installed along with NetworkManager by default. To install NetworkManager-tui:
```
yum install NetworkManager-tui
```
```
~]# yum install NetworkManager-tui
```
Copy to Clipboard Toggle word wrap
To verify that NetworkManager is running, see Section 2.3, “Checking the Status of NetworkManager”.

Procedure

Start the nmtui tool:
```
nmtui
```
```
~]$ nmtui
```
Copy to Clipboard Toggle word wrap
The text user interface appears.
View larger image

Figure 3.1. The NetworkManager Text User Interface starting menu
To navigate, use the arrow keys or press Tab to step forwards and press Shift+Tab to step back through the options. Press Enter to select an option. The Space bar toggles the status of a check box.

To apply changes after a modified connection which is already active requires a reactivation of the connection. In this case, follow the procedure below:

Procedure

Select the Activate a connection menu entry.

View larger image

Figure 3.2. Activate a Connection
Select the modified connection. On the right, click the Deactivate button.

View larger image

Figure 3.3. Deactivate the Modified Connection
Choose the connection again and click the Activate button.

View larger image

Figure 3.4. Reactivate the Modified Connection

The following commands are also available:

```
nmtui edit connection-name
```
```
nmtui edit connection-name
```
Copy to Clipboard Toggle word wrap
If no connection name is supplied, the selection menu appears. If the connection name is supplied and correctly identified, the relevant Edit connection screen appears.
```
nmtui connect connection-name
```
```
nmtui connect connection-name
```
Copy to Clipboard Toggle word wrap
If no connection name is supplied, the selection menu appears. If the connection name is supplied and correctly identified, the relevant connection is activated. Any invalid command prints a usage message.

Note that nmtui does not support all types of connections. In particular, you cannot edit VPNs, wireless network connections using WPA Enterprise, or Ethernet connections using 802.1X.

Voltar ao topo

Este conteúdo não está disponível no idioma selecionado.

3.2. Configuring IP Networking with nmtui

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links