Este conteúdo não está disponível no idioma selecionado.
22.3. Write Barrier Considerations
Some system configurations do not need write barriers to protect data. In most cases, other methods are preferable to write barriers, since enabling write barriers causes a significant performance penalty.
Disabling Write Caches
One way to alternatively avoid data integrity issues is to ensure that no write caches lose data on power failures. When possible, the best way to configure this is to disable the write cache. On a simple server or desktop with one or more SATA drives (off a local SATA controller Intel AHCI part), you can disable the write cache on the target SATA drives with the following command:
#hdparm -W0 /device/
Battery-Backed Write Caches
Write barriers are also unnecessary whenever the system uses hardware RAID controllers with battery-backed write cache. If the system is equipped with such controllers and if its component drives have write caches disabled, the controller acts as a write-through cache; this informs the kernel that the write cache data survives a power loss.
Most controllers use vendor-specific tools to query and manipulate target drives. For example, the LSI Megaraid SAS controller uses a battery-backed write cache; this type of controller requires the
MegaCli64 tool to manage target drives. To show the state of all back-end drives for LSI Megaraid SAS, use:
#MegaCli64 -LDGetProp -DskCache -LAll -aALL
To disable the write cache of all back-end drives for LSI Megaraid SAS, use:
#MegaCli64 -LDSetProp -DisDskCache -Lall -aALL
Note
Hardware RAID cards recharge their batteries while the system is operational. If a system is powered off for an extended period of time, the batteries will lose their charge, leaving stored data vulnerable during a power failure.
