Este conteúdo não está disponível no idioma selecionado.

Chapter 9. Reinstalling GRUB


You can reinstall the GRUB boot loader to fix certain problems, usually caused by an incorrect installation of GRUB, missing files, or a broken system. You can resolve these issues by restoring the missing files and updating the boot information.

Reasons to reinstall GRUB:

  • Upgrading the GRUB boot loader packages.
  • Adding the boot information to another drive.
  • The user requires the GRUB boot loader to control installed operating systems. However, some operating systems are installed with their own boot loaders and reinstalling GRUB returns control to the desired operating system.
Note

GRUB restores files only if they are not corrupted.

9.1. Reinstalling GRUB on BIOS-based machines

You can reinstall the GRUB boot loader on your BIOS-based system. Always reinstall GRUB after updating the GRUB packages.

Important

This overwrites the existing GRUB to install the new GRUB. Ensure that the system does not cause data corruption or boot crash during the installation.

Procedure

  1. Reinstall GRUB on the device where it is installed. For example, if sda is your device:

    # grub2-install /dev/sda
  2. Reboot your system for the changes to take effect:

    # reboot

9.2. Reinstalling GRUB on UEFI-based machines

You can reinstall the GRUB boot loader on your UEFI-based system.

Important

Ensure that the system does not cause data corruption or boot crash during the installation.

Procedure

  1. Reinstall the grub2-efi and shim boot loader files:

    # yum reinstall grub2-efi shim
  2. Reboot your system for the changes to take effect:

    # reboot

9.3. Reinstalling GRUB on IBM Power machines

Reinstall the GRUB boot loader on the Power PC Reference Platform (PReP) boot partition of your IBM Power system. Always reinstall GRUB after updating the GRUB packages.

Important

This overwrites the existing GRUB to install the new GRUB. Ensure that the system does not cause data corruption or boot crash during the installation.

Procedure

  1. Determine the disk partition that stores GRUB:

    # bootlist -m normal -o
    sda1
  2. Reinstall GRUB on the disk partition:

    # grub2-install partition

    Replace partition with the identified GRUB partition, such as /dev/sda1.

  3. Reboot your system for the changes to take effect:

    # reboot

9.4. Resetting GRUB

Resetting GRUB removes all GRUB configuration files and system settings. It reinstalls the boot loader and restores all configuration settings to their default values. This process fixes failures caused by corrupted files and invalid configuration.

Important

The following procedure will remove all the customization made by the user.

Procedure

  1. Remove the configuration files:

    # rm /etc/grub.d/*
    # rm /etc/sysconfig/grub
  2. Reinstall packages.

    • On BIOS-based machines:

      # yum reinstall grub2-tools
    • On UEFI-based machines:

      # yum reinstall grub2-efi shim grub2-tools grub2-common
  3. Rebuild the grub.cfg file for the changes to take effect.

    • On BIOS-based machines:

      # grub2-mkconfig -o /boot/grub2/grub.cfg
    • On UEFI-based machines:

      # grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
  4. Follow Reinstalling GRUB procedure to restore GRUB on the /boot/ partition.
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2026 Red Hat
Voltar ao topo