Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

8.8. Testing the Configuration

It is important that all SCSI fencing requirements be met in order for your system to successfully fence a node using SCSI persistent reservations. The SCSI fencing requirements are noted in Section 8.2, “SCSI Fencing Requirements and Limitations”. To ensure that your system meets these requirements, you should test your configuration.
After the cluster.conf has been set up on all of the nodes in the system, you can perform the following procedure to verify that all of the requirements have been met for SCSI fencing and that the configuration is successful.
  1. For every node in the cluster, you should verify that the necessary infrastructure is up and running:
    • Ensure that the cluster infrastructure is up and running on every node in the cluster; you can check this with the cman_tool status command.
    • Ensure that the clvmd daemon is running; you can check this with the service clvmd status command.
    • Ensure that the scsi_reserve service has been turned on by executing the chkconfig scsi_reserve on command.
  2. Set up cluster LVM volumes to test. 
    [root@tng3-1 ~]# pvcreate /dev/sda1 /dev/sdb1 /dev/sdc1
    Copy to Clipboard Toggle word wrap 
    [root@tng3-1 ~]# vgcreate new_vol_group /dev/sda1 /dev/sdb1 /dev/sdc1
    Copy to Clipboard Toggle word wrap 
    [root@tng3-1 ~]# lvcreate -L2G -n new_logical_volume new_vol_group
    Copy to Clipboard Toggle word wrap 
    [root@tng3-1 ~]# gfs_mkfs -plock_nolock -j 1 /dev/new_vol_group/new_logical_volume
    Copy to Clipboard Toggle word wrap 
    [root@tng3-1 ~]# mount /dev/new_vol_group/new_logical_volume /mnt
    Copy to Clipboard Toggle word wrap
  3. Run the scsi_reserve init script on all nodes, and then check to see whether this worked. 
    [root@clusternode1 ~]# service scsi_reserve start
[root@clusternode1 ~]# service scsi_reserve status
[root@clusternode2 ~]# service scsi_reserve start
[root@clusternode2 ~]# service scsi_reserve status
[root@clusternode3 ~]# service scsi_reserve start
[root@clusternode3 ~]# service scsi_reserve status
    Copy to Clipboard Toggle word wrap
  4. Execute the following commands and check whether the nodes have been fenced. 
    # /sbin/fence_node clusternode1.example.com
# /sbin/fence_node clusternode2.example.com
# /sbin/fence_node clusternode3.example.com
    Copy to Clipboard Toggle word wrap
返回顶部
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2025 Red Hat