16.4. Using the web console for managing virtual machine network interfaces

Procedure

1. Log in to the RHEL 10 web console.

2. In the Virtual Machines interface, click the VM whose information you want to see.

   A new page opens with an Overview section with basic information about the selected VM and a Console section to access the VM’s graphical interface.

3. Scroll to Network Interfaces.

   The Networks Interfaces section displays information about the virtual network interface configured for the VM as well as options to Add, Delete, Edit, or Unplug network interfaces.

   The information includes the following:

   • Type - The type of network interface for the VM. The types include virtual network, bridge to LAN, and direct attachment.

     注意

     Generic Ethernet connection is not supported in RHEL 10 and later.

   • Model type - The model of the virtual network interface.
   • MAC Address - The MAC address of the virtual network interface.
   • IP Address - The IP address of the virtual network interface.
   • Source - The source of the network interface. This is dependent on the network type.
   • State - The state of the virtual network interface.
4. To edit the virtual network interface settings, Click Edit. The Virtual Network Interface Settings dialog opens.
5. Change the interface type, source, model, or MAC address.

6. Click Save. The network interface is modified.

   注意

   Changes to the virtual network interface settings take effect only after restarting the VM.

   Additionally, MAC address can only be modified when the VM is shut off.

Procedure

1. Log in to the RHEL 10 web console.

2. In the Virtual Machines interface, click the VM whose information you want to see.

   A new page opens with an Overview section with basic information about the selected VM and a Console section to access the VM’s graphical interface.

3. Scroll to Network Interfaces.

   The Networks Interfaces section displays information about the virtual network interface configured for the VM as well as options to Add, Edit, or Plug network interfaces.

4. Click Plug in the row of the virtual network interface you want to connect.

   The selected virtual network interface connects to the VM.

Procedure

1. Log in to the RHEL 10 web console.

2. In the Virtual Machines interface, click the VM whose information you want to see.

   A new page opens with an Overview section with basic information about the selected VM and a Console section to access the VM’s graphical interface.

3. Scroll to Network Interfaces.

   The Networks Interfaces section displays information about the virtual network interface configured for the VM as well as options to Add, Delete, Edit, or Unplug network interfaces.

4. Click Unplug in the row of the virtual network interface you want to disconnect.

   The selected virtual network interface disconnects from the VM.