Search

Chapter 8. Installing a Stand-alone Deployment of OpenShift Container Registry

download PDF

8.1. About OpenShift Container Registry

OpenShift Container Platform is a fully-featured enterprise solution that includes an integrated container registry called OpenShift Container Registry (OCR). Alternatively, instead of deploying OpenShift Container Platform as a full PaaS environment for developers, you can install OCR as a stand-alone container registry to run on-premise or in the cloud.

When installing a stand-alone deployment of OCR, a cluster of masters and nodes is still installed, similar to a typical OpenShift Container Platform installation. Then, the container registry is deployed to run on the cluster. This stand-alone deployment option is useful for administrators that want a container registry, but do not require the full OpenShift Container Platform environment that includes the developer-focused web console and application build and deployment tools.

OCR provides the following capabilities:

Administrators may want to deploy a stand-alone OCR to manage a registry separately that supports multiple OpenShift Container Platform clusters. A stand-alone OCR also enables administrators to separate their registry to satisfy their own security or compliance requirements.

8.2. Minimum Hardware Requirements

Installing a stand-alone OCR has the following hardware requirements:

  • Physical or virtual system, or an instance running on a public or private IaaS.
  • Base OS: RHEL 7.4 or 7.5 with the "Minimal" installation option and the latest packages from the RHEL 7 Extras channel, or RHEL Atomic Host 7.4.5 or later.
  • NetworkManager 1.0 or later
  • 2 vCPU.
  • Minimum 16 GB RAM.
  • Minimum 15 GB hard disk space for the file system containing /var/.
  • An additional minimum 15 GB unallocated space to be used for Docker’s storage back end; see Configuring Docker Storage for details.
Important

OpenShift Container Platform supports servers with x86_64 or IBM POWER architecture. If you use IBM POWER servers to host cluster nodes, you can only use IBM POWER servers.

Note

Meeting the /var/ file system sizing requirements in RHEL Atomic Host requires making changes to the default configuration. See Managing Storage in Red Hat Enterprise Linux Atomic Host for instructions on configuring this during or after installation.

8.3. Supported System Topologies

The following system topologies are supported for stand-alone OCR:

All-in-one

A single host that includes the master, node, etcd, and registry components.

Multiple Masters (Highly-Available)

Three hosts with all components included on each (master, node, etcd, and registry), with the masters configured for native high-availability.

8.4. Host Preparation

Before installing stand-alone OCR, all of the same steps detailed in the Host Preparation topic for installing a full OpenShift Container Platform PaaS must be performed. This includes registering and subscribing the host(s) to the proper repositories, installing or updating certain packages, and setting up Docker and its storage requirements.

Follow the steps in the Host Preparation topic, then continue to Stand-alone Registry Installation Methods.

8.5. Installing Using Ansible

When installing stand-alone OCR, the steps are mostly the same as installing a full OpenShift Container Platform cluster using Ansible, as described in the full cluster installation process. The main difference is that you must set deployment_subtype=registry in the inventory file within the [OSEv3:vars] section for the playbooks to follow the registry installation path.

See the following example inventory files for the different supported system topologies:

All-in-one Stand-alone OpenShift Container Registry Inventory File

# Create an OSEv3 group that contains the masters and nodes groups
[OSEv3:children]
masters
nodes
etcd

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
# SSH user, this user should allow ssh based auth without requiring a password
ansible_ssh_user=root

openshift_master_default_subdomain=apps.test.example.com

# If ansible_ssh_user is not root, ansible_become must be set to true
#ansible_become=true

openshift_deployment_type=openshift-enterprise
deployment_subtype=registry 1
openshift_hosted_infra_selector="" 2

# uncomment the following to enable htpasswd authentication; defaults to DenyAllPasswordIdentityProvider
#openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider'}]

# host group for masters
[masters]
registry.example.com

# host group for etcd
[etcd]
registry.example.com

# host group for nodes
[nodes]
registry.example.com openshift_node_group_name='node-config-all-in-one'

1
Set deployment_subtype=registry to ensure installation of stand-alone OCR and not a full OpenShift Container Platform environment.
2
Allows the registry and its web console to be scheduled on the single host.

Multiple Masters (Highly-Available) Stand-alone OpenShift Container Registry Inventory File

# Create an OSEv3 group that contains the master, nodes, etcd, and lb groups.
# The lb group lets Ansible configure HAProxy as the load balancing solution.
# Comment lb out if your load balancer is pre-configured.
[OSEv3:children]
masters
nodes
etcd
lb

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
ansible_ssh_user=root
openshift_deployment_type=openshift-enterprise
deployment_subtype=registry 1

openshift_master_default_subdomain=apps.test.example.com

# Uncomment the following to enable htpasswd authentication; defaults to
# DenyAllPasswordIdentityProvider.
#openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider'}]

# Native high availability cluster method with optional load balancer.
# If no lb group is defined installer assumes that a load balancer has
# been preconfigured. For installation the value of
# openshift_master_cluster_hostname must resolve to the load balancer
# or to one or all of the masters defined in the inventory if no load
# balancer is present.
openshift_master_cluster_method=native
openshift_master_cluster_hostname=openshift-internal.example.com
openshift_master_cluster_public_hostname=openshift-cluster.example.com

# apply updated node-config-compute group defaults
openshift_node_groups=[{'name': 'node-config-compute', 'labels': ['node-role.kubernetes.io/compute=true'], 'edits': [{'key': 'kubeletArguments.pods-per-core','value': ['20']}, {'key': 'kubeletArguments.max-pods','value': ['250']}, {'key': 'kubeletArguments.image-gc-high-threshold', 'value':['90']}, {'key': 'kubeletArguments.image-gc-low-threshold', 'value': ['80']}]}]

# enable ntp on masters to ensure proper failover
openshift_clock_enabled=true

# host group for masters
[masters]
master1.example.com
master2.example.com
master3.example.com

# host group for etcd
[etcd]
etcd1.example.com
etcd2.example.com
etcd3.example.com

# Specify load balancer host
[lb]
lb.example.com

# host group for nodes, includes region info
[nodes]
master[1:3].example.com openshift_node_group_name='node-config-master-infra'
node1.example.com       openshift_node_group_name='node-config-compute'
node2.example.com       openshift_node_group_name='node-config-compute'

1
Set deployment_subtype=registry to ensure installation of stand-alone OCR and not a full OpenShift Container Platform environment.

After you have configured Ansible by defining an inventory file in /etc/ansible/hosts:

  1. Run the prerequisites.yml playbook to configure base packages and Docker. This must be run only once before deploying a new cluster. Use the following command, specifying -i if your inventory file located somewhere other than /etc/ansible/hosts:

    Important

    The host that you run the Ansible playbook on must have at least 75MiB of free memory per host in the inventory.

    # ansible-playbook  [-i /path/to/inventory] \
        /usr/share/ansible/openshift-ansible/playbooks/prerequisites.yml
  2. Run the deploy_cluster.yml playbook to initiate the installation:

    # ansible-playbook  [-i /path/to/inventory] \
        /usr/share/ansible/openshift-ansible/playbooks/deploy_cluster.yml
Note

For more detailed usage information on the cluster installation process, including a comprehensive list of available Ansible variables, see the full documentation starting with Planning Your Installation.

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.