SupportConsoleDevelopersStart a trialContact

Chapter 9. Updating a cluster using the CLI

You can update, or upgrade, an OpenShift Container Platform cluster within a minor version by using the OpenShift CLI (oc). You can also update a cluster between minor versions by following the same instructions.

9.1. Prerequisites

  • Have access to the cluster as a user with admin privileges. See Using RBAC to define and apply permissions.
  • Have a recent etcd backup in case your update fails and you must restore your cluster to a previous state.
  • Support for RHEL7 workers is removed in OpenShift Container Platform 4.10. You must replace RHEL7 workers with RHEL8 or RHCOS workers before upgrading to OpenShift Container Platform 4.10. Red Hat does not support in-place RHEL7 to RHEL8 updates for RHEL workers; those hosts must be replaced with a clean operating system install.
  • Ensure all Operators previously installed through Operator Lifecycle Manager (OLM) are updated to their latest version in their latest channel. Updating the Operators ensures they have a valid update path when the default OperatorHub catalogs switch from the current minor version to the next during a cluster update. See Updating installed Operators for more information.
  • Ensure that all machine config pools (MCPs) are running and not paused. Nodes associated with a paused MCP are skipped during the update process. You can pause the MCPs if you are performing a canary rollout update strategy.
  • If your cluster uses manually maintained credentials, update the cloud provider resources for the new release. For more information, including how to determine if this is a requirement for your cluster, see Preparing to update a cluster with manually maintained credentials.
  • Ensure that you address all Upgradeable=False conditions so the cluster allows an upgrade to the next minor version. You can run the oc adm upgrade command for an output of all Upgradeable=False conditions and the condition reasoning to help you prepare for a minor version update.
  • If you run an Operator or you have configured any application with the pod disruption budget, you might experience an interruption during the upgrade process. If minAvailable is set to 1 in PodDisruptionBudget, the nodes are drained to apply pending machine configs which might block the eviction process. If several nodes are rebooted, all the pods might run on only one node, and the PodDisruptionBudget field can prevent the node drain.
Important
  • When an update is failing to complete, the Cluster Version Operator (CVO) reports the status of any blocking components while attempting to reconcile the update. Rolling your cluster back to a previous version is not supported. If your update is failing to complete, contact Red Hat support.
  • Using the unsupportedConfigOverrides section to modify the configuration of an Operator is unsupported and might block cluster updates. You must remove this setting before you can update your cluster.

Additional resources

9.2. Pausing a MachineHealthCheck resource

During the upgrade process, nodes in the cluster might become temporarily unavailable. In the case of worker nodes, the machine health check might identify such nodes as unhealthy and reboot them. To avoid rebooting such nodes, pause all the MachineHealthCheck resources before updating the cluster.

Prerequisites

  • Install the OpenShift CLI (oc).

Procedure

  1. To list all the available MachineHealthCheck resources that you want to pause, run the following command: 

    $ oc get machinehealthcheck -n openshift-machine-api

  2. To pause the machine health checks, add the cluster.x-k8s.io/paused="" annotation to the MachineHealthCheck resource. Run the following command: 

    $ oc -n openshift-machine-api annotate mhc <mhc-name> cluster.x-k8s.io/paused=""

    The annotated MachineHealthCheck resource resembles the following YAML file: 

    apiVersion: machine.openshift.io/v1beta1
kind: MachineHealthCheck
metadata:
  name: example
  namespace: openshift-machine-api
  annotations:
    cluster.x-k8s.io/paused: ""
spec:
  selector:
    matchLabels:
      role: worker
  unhealthyConditions:
  - type:    "Ready"
    status:  "Unknown"
    timeout: "300s"
  - type:    "Ready"
    status:  "False"
    timeout: "300s"
  maxUnhealthy: "40%"
status:
  currentHealthy: 5
  expectedMachines: 5
    Important

    Resume the machine health checks after updating the cluster. To resume the check, remove the pause annotation from the MachineHealthCheck resource by running the following command: 

    $ oc -n openshift-machine-api annotate mhc <mhc-name> cluster.x-k8s.io/paused-

9.3. About updating single node OpenShift Container Platform

You can update, or upgrade, a single-node OpenShift Container Platform cluster by using either the console or CLI.

However, note the following limitations:

  • The prerequisite to pause the MachineHealthCheck resources is not required because there is no other node to perform the health check.
  • Restoring a single-node OpenShift Container Platform cluster using an etcd backup is not officially supported. However, it is good practice to perform the etcd backup in case your upgrade fails. If your control plane is healthy, you might be able to restore your cluster to a previous state by using the backup.

  • Updating a single-node OpenShift Container Platform cluster requires downtime and can include an automatic reboot. The amount of downtime depends on the update payload, as described in the following scenarios:

    • If the update payload contains an operating system update, which requires a reboot, the downtime is significant and impacts cluster management and user workloads.
    • If the update contains machine configuration changes that do not require a reboot, the downtime is less, and the impact on the cluster management and user workloads is lessened. In this case, the node draining step is skipped with single-node OpenShift Container Platform because there is no other node in the cluster to reschedule the workloads to.
    • If the update payload does not contain an operating system update or machine configuration changes, a short API outage occurs and resolves quickly.
Important

There are conditions, such as bugs in an updated package, that can cause the single node to not restart after a reboot. In this case, the update does not rollback automatically.

Additional resources

9.4. Updating a cluster by using the CLI

If updates are available, you can update your cluster by using the OpenShift CLI (oc).

You can find information about available OpenShift Container Platform advisories and updates in the errata section of the Customer Portal.

Prerequisites

  • Install the OpenShift CLI (oc) that matches the version for your updated version.
  • Log in to the cluster as user with cluster-admin privileges.
  • Pause all MachineHealthCheck resources.

Procedure

  1. View the available updates and note the version number of the update that you want to apply: 

    $ oc adm upgrade

    Example output

    Cluster version is 4.9.23

Upstream is unset, so the cluster will use an appropriate default.
Channel: stable-4.9 (available channels: candidate-4.10, candidate-4.9, fast-4.10, fast-4.9, stable-4.10, stable-4.9, eus-4.10)

Recommended updates:

VERSION IMAGE
4.9.24  quay.io/openshift-release-dev/ocp-release@sha256:6a899c54dda6b844bb12a247e324a0f6cde367e880b73ba110c056df6d018032
4.9.25  quay.io/openshift-release-dev/ocp-release@sha256:2eafde815e543b92f70839972f585cc52aa7c37aa72d5f3c8bc886b0fd45707a
4.9.26  quay.io/openshift-release-dev/ocp-release@sha256:3ccd09dd08c303f27a543351f787d09b83979cd31cf0b4c6ff56cd68814ef6c8
4.9.27  quay.io/openshift-release-dev/ocp-release@sha256:1c7db78eec0cf05df2cead44f69c0e4b2c3234d5635c88a41e1b922c3bedae16
4.9.28  quay.io/openshift-release-dev/ocp-release@sha256:4084d94969b186e20189649b5affba7da59f7d1943e4e5bc7ef78b981eafb7a8
4.9.29  quay.io/openshift-release-dev/ocp-release@sha256:b04ca01d116f0134a102a57f86c67e5b1a3b5da1c4a580af91d521b8fa0aa6ec
4.9.31  quay.io/openshift-release-dev/ocp-release@sha256:2a28b8ebb53d67dd80594421c39e36d9896b1e65cb54af81fbb86ea9ac3bf2d7
4.9.32  quay.io/openshift-release-dev/ocp-release@sha256:ecdb6d0df547b857eaf0edb5574ddd64ca6d9aff1fa61fd1ac6fb641203bedfa

    Note

    For details and information on how to perform an EUS-to-EUS channel upgrade, please refer to the Preparing to perform an EUS-to-EUS upgrade page, listed in the Additional resources section.

  2. Based on your organization requirements, set the appropriate upgrade channel. For example, you can set your channel to stable-4.10, fast-4.10, or eus-4.10. For more information about channels, refer to Understanding update channels and releases listed in the Additional resources section. 

    $ oc adm upgrade channel <channel>

    For example, to set the channel to stable-4.10: 

    $ oc adm upgrade channel stable-4.10
    Important

    For production clusters, you must subscribe to a stable-*, eus-*, or fast-* channel.

    Note

    When you are ready to move to the next minor version, choose the channel that corresponds to that minor version. The sooner the update channel is declared, the more effectively the cluster can recommend update paths to your target version. The cluster might take some time to evaluate all the possible updates that are available and offer the best update recommendations to choose from. Update recommendations can change over time, as they are based on what update options are available at the time.

    If you cannot see an update path to your target minor version, keep updating your cluster to the latest patch release for your current version until the next minor version is available in the path.

  3. Apply an update:

    • To update to the latest version: 

      $ oc adm upgrade --to-latest=true 1

    • To update to a specific version: 

      $ oc adm upgrade --to=<version> 1
      1 1
      <version> is the update version that you obtained from the output of the oc adm upgrade command.

  4. Review the status of the Cluster Version Operator: 

    $ oc adm upgrade

  5. After the update completes, you can confirm that the cluster version has updated to the new version: 

    $ oc get clusterversion

    Example output

    Cluster version is <version>

Upstream is unset, so the cluster will use an appropriate default.
Channel: stable-4.10 (available channels: candidate-4.10, candidate-4.11, eus-4.10, fast-4.10, fast-4.11, stable-4.10)

No updates available. You may force an upgrade to a specific release image, but doing so might not be supported and might result in downtime or data loss.

    Note

    If the oc get clusterversion command displays the following error while the PROGRESSING status is True, you can ignore the error. 

    NAME    VERSION AVAILABLE PROGRESSING SINCE STATUS
version 4.10.26 True      True        24m   Unable to apply 4.11.0-rc.7: an unknown error has occurred: MultipleErrors

  6. If you are upgrading your cluster to the next minor version, such as version X.y to X.(y+1), it is recommended to confirm that your nodes are upgraded before deploying workloads that rely on a new feature: 

    $ oc get nodes

    Example output

    NAME                           STATUS   ROLES    AGE   VERSION
ip-10-0-168-251.ec2.internal   Ready    master   82m   v1.23.12+8a6bfe4
ip-10-0-170-223.ec2.internal   Ready    master   82m   v1.23.12+8a6bfe4
ip-10-0-179-95.ec2.internal    Ready    worker   70m   v1.23.12+8a6bfe4
ip-10-0-182-134.ec2.internal   Ready    worker   70m   v1.23.12+8a6bfe4
ip-10-0-211-16.ec2.internal    Ready    master   82m   v1.23.12+8a6bfe4
ip-10-0-250-100.ec2.internal   Ready    worker   69m   v1.23.12+8a6bfe4

Additional resources

9.5. Updating along a conditional upgrade path

You can update along a recommended conditional upgrade path using the web console or the OpenShift CLI (oc). When a conditional update is not recommended for your cluster, you can update along a conditional upgrade path using the OpenShift CLI (oc) 4.10 or later.

Procedure

  1. To view the description of the update when it is not recommended because a risk might apply, run the following command: 

    $ oc adm upgrade --include-not-recommended

  2. If the cluster administrator evaluates the potential known risks and decides it is acceptable for the current cluster, then the administrator can waive the safety guards and proceed the update by running the following command: 

    $ oc adm upgrade --allow-not-recommended --to <version> <.>

    <.> <version> is the supported but not recommended update version that you obtained from the output of the previous command.

Additional resources

9.6. Changing the update server by using the CLI

Changing the update server is optional. If you have an OpenShift Update Service (OSUS) installed and configured locally, you must set the URL for the server as the upstream to use the local server during updates. The default value for upstream is https://api.openshift.com/api/upgrades_info/v1/graph.

Procedure

  • Change the upstream parameter value in the cluster version: 

    $ oc patch clusterversion/version --patch '{"spec":{"upstream":"<update-server-url>"}}' --type=merge

    The <update-server-url> variable specifies the URL for the update server.

    Example output

    clusterversion.config.openshift.io/version patched

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.