Chapter 6. Installing a cluster on AWS with network customizations

6.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an AWS account to host the cluster.
Important
If you have an AWS profile stored on your computer, it must not use a temporary session token that you generated while using a multi-factor authentication device. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use key-based, long-lived credentials. To generate appropriate keys, see Managing Access Keys for IAM Users in the AWS documentation. You can supply the keys when you run the installation program.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.

6.2. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.12, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

If your cluster cannot have direct internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the required content and use it to populate a mirror registry with the installation packages. With some installation types, the environment that you install your cluster in will not require internet access. Before you update the cluster, you update the content of the mirror registry.

6.3. Generating a key pair for cluster node SSH access

During an OpenShift Container Platform installation, you can provide an SSH public key to the installation program. The key is passed to the Red Hat Enterprise Linux CoreOS (RHCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys list for the core user on each node, which enables password-less authentication.

After the key is passed to the nodes, you can use the key pair to SSH in to the RHCOS nodes as the user core. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.

If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather command also requires the SSH public key to be in place on the cluster nodes.

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64, ppc64le, and s390x architectures. do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on the host you are using for installation.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.5. Network configuration phases

There are two phases prior to OpenShift Container Platform installation where you can customize the network configuration.

Phase 1

You can customize the following network-related fields in the install-config.yaml file before you create the manifest files:

networking.networkType
networking.clusterNetwork
networking.serviceNetwork
networking.machineNetwork
For more information on these fields, refer to Installation configuration parameters.
Note
Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.
Important
The CIDR range 172.17.0.0/16 is reserved by libVirt. You cannot use this range or any range that overlaps with this range for any networks in your cluster.

Phase 2

After creating the manifest files by running openshift-install create manifests, you can define a customized Cluster Network Operator manifest with only the fields you want to modify. You can use the manifest to specify advanced network configuration.

You cannot override the values specified in phase 1 in the install-config.yaml file during phase 2. However, you can further customize the network plugin during phase 2.

6.6. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Amazon Web Services (AWS).

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Obtain service principal permissions at the subscription level.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install create install-config --dir <installation_directory> 1
```
  1
  For <installation_directory>, specify the directory name to store the files that the installation program creates.
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    Note
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select AWS as the platform to target.
  3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
  4. Select the AWS region to deploy the cluster to.
  5. Select the base domain for the Route 53 service that you configured for your cluster.
  6. Enter a descriptive name for your cluster.
  7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

6.6.1. Installation configuration parameters

Before you deploy an OpenShift Container Platform cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.6.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.1. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installation program may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.6.1.2. Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Note

Globalnet is not supported with Red Hat OpenShift Data Foundation disaster recovery solutions. For regional disaster recovery scenarios, ensure that you use a nonoverlapping range of private IP addresses for the cluster and service networks in each cluster.

Table 6.2. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The Red Hat OpenShift Networking network plugin to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI plugin for all-Linux networks. `OVNKubernetes` is a CNI plugin for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OVNKubernetes`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network plugins support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.6.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.3. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components. For more information, see the "Cluster capabilities" page in Installing.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11`, `v4.12` and `vCurrent`. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. You may specify multiple capabilities in this parameter.	String array
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` and `arm64`. Not all installation options support the 64-bit ARM architecture. To verify if your installation option is supported on your platform, see Supported installation methods for different platforms in Selecting a cluster installation method and preparing it for users.	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`featureSet`	Enables the cluster for a feature set. A feature set is a collection of OpenShift Container Platform features that are not enabled by default. For more information about enabling a feature set during installation, see "Enabling features using feature gates".	String. The name of the feature set to enable, such as `TechPreviewNoUpgrade`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` and `arm64`. Not all installation options support the 64-bit ARM architecture. To verify if your installation option is supported on your platform, see Supported installation methods for different platforms in Selecting a cluster installation method and preparing it for users.	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information about CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64`, `ppc64le`, and `s390x` architectures. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`platform.aws.lbType`	Required to set the NLB load balancer type in AWS. Valid values are `Classic` or `NLB`. If no value is specified, the installation program defaults to `Classic`. The installation program sets the value provided here in the ingress cluster configuration object. If you do not specify a load balancer type for other Ingress Controllers, they use the type set in this parameter.	`Classic` or `NLB`. The default value is `Classic`.
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.6.1.4. Optional AWS configuration parameters

Optional AWS configuration parameters are described in the following table:

Table 6.4. Optional AWS parameters
Parameter	Description	Values
`compute.platform.aws.amiID`	The AWS AMI used to boot compute machines for the cluster. This is required for regions that require a custom RHCOS AMI.	Any published or custom RHCOS AMI that belongs to the set AWS region. See RHCOS AMIs for AWS infrastructure for available AMI IDs.
`compute.platform.aws.iamRole`	A pre-existing AWS IAM role applied to the compute machine pool instance profiles. You can use these fields to match naming schemes and include predefined permissions boundaries for your IAM roles. If undefined, the installation program creates a new IAM role.	The name of a valid AWS IAM role.
`compute.platform.aws.rootVolume.iops`	The Input/Output Operations Per Second (IOPS) that is reserved for the root volume.	Integer, for example `4000`.
`compute.platform.aws.rootVolume.size`	The size in GiB of the root volume.	Integer, for example `500`.
`compute.platform.aws.rootVolume.type`	The type of the root volume.	Valid AWS EBS volume type, such as `io1`.
`compute.platform.aws.rootVolume.kmsKeyARN`	The Amazon Resource Name (key ARN) of a KMS key. This is required to encrypt operating system volumes of worker nodes with a specific KMS key.	Valid key ID or the key ARN.
`compute.platform.aws.type`	The EC2 instance type for the compute machines.	Valid AWS instance type, such as `m4.2xlarge`. See the Supported AWS machine types table that follows.
`compute.platform.aws.zones`	The availability zones where the installation program creates machines for the compute machine pool. If you provide your own VPC, you must provide a subnet in that availability zone.	A list of valid AWS availability zones, such as `us-east-1c`, in a YAML sequence.
`compute.aws.region`	The AWS region that the installation program creates compute resources in.	Any valid AWS region, such as `us-east-1`. You can use the AWS CLI to access the regions available based on your selected instance type. For example: aws ec2 describe-instance-type-offerings --filters Name=instance-type,Values=c7g.xlarge Important When running on ARM based AWS instances, ensure that you enter a region where AWS Graviton processors are available. See Global availability map in the AWS documentation. Currently, AWS Graviton3 processors are only available in some regions.
`controlPlane.platform.aws.amiID`	The AWS AMI used to boot control plane machines for the cluster. This is required for regions that require a custom RHCOS AMI.	Any published or custom RHCOS AMI that belongs to the set AWS region. See RHCOS AMIs for AWS infrastructure for available AMI IDs.
`controlPlane.platform.aws.iamRole`	A pre-existing AWS IAM role applied to the control plane machine pool instance profiles. You can use these fields to match naming schemes and include predefined permissions boundaries for your IAM roles. If undefined, the installation program creates a new IAM role.	The name of a valid AWS IAM role.
`controlPlane.platform.aws.rootVolume.kmsKeyARN`	The Amazon Resource Name (key ARN) of a KMS key. This is required to encrypt operating system volumes of control plane nodes with a specific KMS key.	Valid key ID and the key ARN.
`controlPlane.platform.aws.type`	The EC2 instance type for the control plane machines.	Valid AWS instance type, such as `m6i.xlarge`. See the Supported AWS machine types table that follows.
`controlPlane.platform.aws.zones`	The availability zones where the installation program creates machines for the control plane machine pool.	A list of valid AWS availability zones, such as `us-east-1c`, in a YAML sequence.
`controlPlane.aws.region`	The AWS region that the installation program creates control plane resources in.	Valid AWS region, such as `us-east-1`.
`platform.aws.amiID`	The AWS AMI used to boot all machines for the cluster. If set, the AMI must belong to the same region as the cluster. This is required for regions that require a custom RHCOS AMI.	Any published or custom RHCOS AMI that belongs to the set AWS region. See RHCOS AMIs for AWS infrastructure for available AMI IDs.
`platform.aws.hostedZone`	An existing Route 53 private hosted zone for the cluster. You can only use a pre-existing hosted zone when also supplying your own VPC. The hosted zone must already be associated with the user-provided VPC before installation. Also, the domain of the hosted zone must be the cluster domain or a parent of the cluster domain. If undefined, the installation program creates a new hosted zone.	String, for example `Z3URY6TWQ91KVV`.
`platform.aws.serviceEndpoints.name`	The AWS service endpoint name. Custom endpoints are only required for cases where alternative AWS endpoints, like FIPS, must be used. Custom API endpoints can be specified for EC2, S3, IAM, Elastic Load Balancing, Tagging, Route 53, and STS AWS services.	Valid AWS service endpoint name.
`platform.aws.serviceEndpoints.url`	The AWS service endpoint URL. The URL must use the `https` protocol and the host must trust the certificate.	Valid AWS service endpoint URL.
`platform.aws.userTags`	A map of keys and values that the installation program adds as tags to all resources that it creates.	Any valid YAML map, such as key value pairs in the `<key>: <value>` format. For more information about AWS tags, see Tagging Your Amazon EC2 Resources in the AWS documentation. Note You can add up to 25 user defined tags during installation. The remaining 25 tags are reserved for OpenShift Container Platform.
`platform.aws.propagateUserTags`	A flag that directs in-cluster Operators to include the specified user tags in the tags of the AWS resources that the Operators create.	Boolean values, for example `true` or `false`.
`platform.aws.subnets`	If you provide the VPC instead of allowing the installation program to create the VPC for you, specify the subnet for the cluster to use. The subnet must be part of the same `machineNetwork[].cidr` ranges that you specify. For a standard cluster, specify a public and a private subnet for each availability zone. For a private cluster, specify a private subnet for each availability zone.	Valid subnet IDs.

6.6.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.5. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	Input/Output Per Second (IOPS)^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.6.3. Tested instance types for AWS

The following Amazon Web Services (AWS) instance types have been tested with OpenShift Container Platform.

Note

Use the machine types included in the following charts for your AWS instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements that are listed in "Minimum resource requirements for cluster installation".

Example 6.1. Machine types based on 64-bit x86 architecture

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.6.4. Tested instance types for AWS on 64-bit ARM infrastructures

The following Amazon Web Services (AWS) ARM64 instance types have been tested with OpenShift Container Platform.

Note

Use the machine types included in the following charts for your AWS ARM instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements that are listed in "Minimum resource requirements for cluster installation".

Example 6.2. Machine types based on 64-bit ARM architecture

c6g.*
c7g.*
m6g.*
m7g.*
r8g.*

6.6.5. Sample customized install-config.yaml file for AWS

You can customize the installation configuration file (install-config.yaml) to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
credentialsMode: Mint 2
controlPlane: 3 4
  hyperthreading: Enabled 5
  name: master
  platform:
    aws:
      zones:
      - us-west-2a
      - us-west-2b
      rootVolume:
        iops: 4000
        size: 500
        type: io1 6
      metadataService:
        authentication: Optional 7
      type: m6i.xlarge
  replicas: 3
compute: 8
- hyperthreading: Enabled 9
  name: worker
  platform:
    aws:
      rootVolume:
        iops: 2000
        size: 500
        type: io1 10
      metadataService:
        authentication: Optional 11
      type: c5.4xlarge
      zones:
      - us-west-2c
  replicas: 3
metadata:
  name: test-cluster 12
networking: 13
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OVNKubernetes 14
  serviceNetwork:
  - 172.30.0.0/16
platform:
  aws:
    region: us-west-2 15
    propagateUserTags: true 16
    userTags:
      adminContact: jdoe
      costCenter: 7536
    amiID: ami-96c6f8f7 17
    serviceEndpoints: 18
      - name: ec2
        url: https://vpce-id.ec2.us-west-2.vpce.amazonaws.com
fips: false 19
sshKey: ssh-ed25519 AAAA... 20
pullSecret: '{"auths": ...}' 21

1 12 15 21: Required. The installation program prompts you for this value.
2: Optional: Add this parameter to force the Cloud Credential Operator (CCO) to use the specified mode, instead of having the CCO dynamically try to determine the capabilities of the credentials. For details about CCO modes, see the Cloud Credential Operator entry in the Red Hat Operators reference content.
3 8 13 16: If you do not provide these parameters and values, the installation program provides the default value.
4: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
5 9: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger instance types, such as m4.2xlarge or m5.2xlarge, for your machines if you disable simultaneous multithreading.
6 10: To configure faster storage for etcd, especially for larger clusters, set the storage type as io1 and set iops to 2000.
7 11: Whether to require the Amazon EC2 Instance Metadata Service v2 (IMDSv2). To require IMDSv2, set the parameter value to Required. To allow the use of both IMDSv1 and IMDSv2, set the parameter value to Optional. If no value is specified, both IMDSv1 and IMDSv2 are allowed.
Note
The IMDS configuration for control plane machines that is set during cluster installation can only be changed by using the AWS CLI. The IMDS configuration for compute machines can be changed by using compute machine sets.
14: The cluster network plugin to install. The supported values are OVNKubernetes and OpenShiftSDN. The default value is OVNKubernetes.
17: The ID of the AMI used to boot machines for the cluster. If set, the AMI must belong to the same region as the cluster.
18: The AWS service endpoints. Custom endpoints are required when installing to an unknown AWS region. The endpoint URL must use the https protocol and the host must trust the certificate.
19: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64, ppc64le, and s390x architectures.
20: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

6.6.6. Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: ec2.<aws_region>.amazonaws.com,elasticloadbalancing.<aws_region>.amazonaws.com,s3.<aws_region>.amazonaws.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> 5
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations. If you have added the Amazon EC2,Elastic Load Balancing, and S3 VPC endpoints to your VPC, you must add these endpoints to the noProxy field.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
5
Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

6.7. Cluster Network Operator configuration

The configuration for the cluster network is specified as part of the Cluster Network Operator (CNO) configuration and stored in a custom resource (CR) object that is named cluster. The CR specifies the fields for the Network API in the operator.openshift.io API group.

The CNO configuration inherits the following fields during cluster installation from the Network API in the Network.config.openshift.io API group and these fields cannot be changed:

clusterNetwork: IP address pools from which pod IP addresses are allocated.
serviceNetwork: IP address pool for services.
defaultNetwork.type: Cluster network plugin, such as OpenShift SDN or OVN-Kubernetes.

You can specify the cluster network plugin configuration for your cluster by setting the fields for the defaultNetwork object in the CNO object named cluster.

6.7.1. Cluster Network Operator configuration object

The fields for the Cluster Network Operator (CNO) are described in the following table:

Table 6.6. Cluster Network Operator configuration object
Field	Type	Description
`metadata.name`	`string`	The name of the CNO object. This name is always `cluster`.
`spec.clusterNetwork`	`array`	A list specifying the blocks of IP addresses from which pod IP addresses are allocated and the subnet prefix length assigned to each individual node in the cluster. For example: spec: clusterNetwork: - cidr: 10.128.0.0/19 hostPrefix: 23 - cidr: 10.128.32.0/19 hostPrefix: 23 You can customize this field only in the `install-config.yaml` file before you create the manifests. The value is read-only in the manifest file.
`spec.serviceNetwork`	`array`	A block of IP addresses for services. The OpenShift SDN and OVN-Kubernetes network plugins support only a single IP address block for the service network. For example: spec: serviceNetwork: - 172.30.0.0/14 You can customize this field only in the `install-config.yaml` file before you create the manifests. The value is read-only in the manifest file.
`spec.defaultNetwork`	`object`	Configures the network plugin for the cluster network.
`spec.kubeProxyConfig`	`object`	The fields for this object specify the kube-proxy configuration. If you are using the OVN-Kubernetes cluster network plugin, the kube-proxy configuration has no effect.

defaultNetwork object configuration

The values for the defaultNetwork object are defined in the following table:

Table 6.7. defaultNetwork object
Field	Type	Description
`type`	`string`	Either `OpenShiftSDN` or `OVNKubernetes`. The Red Hat OpenShift Networking network plugin is selected during installation. This value cannot be changed after cluster installation. Note OpenShift Container Platform uses the OVN-Kubernetes network plugin by default.
`openshiftSDNConfig`	`object`	This object is only valid for the OpenShift SDN network plugin.
`ovnKubernetesConfig`	`object`	This object is only valid for the OVN-Kubernetes network plugin.

Configuration for the OpenShift SDN network plugin

The following table describes the configuration fields for the OpenShift SDN network plugin:

Table 6.8. openshiftSDNConfig object
Field	Type	Description
`mode`	`string`	Configures the network isolation mode for OpenShift SDN. The default value is `NetworkPolicy`. The values `Multitenant` and `Subnet` are available for backwards compatibility with OpenShift Container Platform 3.x but are not recommended. This value cannot be changed after cluster installation.
`mtu`	`integer`	The maximum transmission unit (MTU) for the VXLAN overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU. If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes. If your cluster requires different MTU values for different nodes, you must set this value to `50` less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of `9001`, and some have an MTU of `1500`, you must set this value to `1450`. This value cannot be changed after cluster installation.
`vxlanPort`	`integer`	The port to use for all VXLAN packets. The default value is `4789`. This value cannot be changed after cluster installation. If you are running in a virtualized environment with existing nodes that are part of another VXLAN network, then you might be required to change this. For example, when running an OpenShift SDN overlay on top of VMware NSX-T, you must select an alternate port for the VXLAN, because both SDNs use the same default VXLAN port number. On Amazon Web Services (AWS), you can select an alternate port for the VXLAN between port `9000` and port `9999`.

Example OpenShift SDN configuration

defaultNetwork:
  type: OpenShiftSDN
  openshiftSDNConfig:
    mode: NetworkPolicy
    mtu: 1450
    vxlanPort: 4789

Configuration for the OVN-Kubernetes network plugin

The following table describes the configuration fields for the OVN-Kubernetes network plugin:

Table 6.9. ovnKubernetesConfig object
Field	Type	Description
`mtu`	`integer`	The maximum transmission unit (MTU) for the Geneve (Generic Network Virtualization Encapsulation) overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU. If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes. If your cluster requires different MTU values for different nodes, you must set this value to `100` less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of `9001`, and some have an MTU of `1500`, you must set this value to `1400`.
`genevePort`	`integer`	The port to use for all Geneve packets. The default value is `6081`. This value cannot be changed after cluster installation.
`ipsecConfig`	`object`	Specify an empty object to enable IPsec encryption.
`policyAuditConfig`	`object`	Specify a configuration object for customizing network policy audit logging. If unset, the defaults audit log settings are used.
`gatewayConfig`	`object`	Optional: Specify a configuration object for customizing how egress traffic is sent to the node gateway. Note While migrating egress traffic, you can expect some disruption to workloads and service traffic until the Cluster Network Operator (CNO) successfully rolls out the changes.
`v4InternalSubnet`	If your existing network infrastructure overlaps with the `100.64.0.0/16` IPv4 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OpenShift Container Platform installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster. For example, if the `clusterNetwork.cidr` value is `10.128.0.0/14` and the `clusterNetwork.hostPrefix` value is `/23`, then the maximum number of nodes is `2^(23-14)=512`. This field cannot be changed after installation.	The default value is `100.64.0.0/16`.
`v6InternalSubnet`	If your existing network infrastructure overlaps with the `fd98::/48` IPv6 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OpenShift Container Platform installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster. This field cannot be changed after installation.	The default value is `fd98::/48`.

Table 6.10. policyAuditConfig object
Field	Type	Description
`rateLimit`	integer	The maximum number of messages to generate every second per node. The default value is `20` messages per second.
`maxFileSize`	integer	The maximum size for the audit log in bytes. The default value is `50000000` or 50 MB.
`destination`	string	One of the following additional audit log targets: `libc` The libc `syslog()` function of the journald process on the host. `udp:<host>:<port>` A syslog server. Replace `<host>:<port>` with the host and port of the syslog server. `unix:<file>` A Unix Domain Socket file specified by `<file>`. `null` Do not send the audit logs to any additional target.
`syslogFacility`	string	The syslog facility, such as `kern`, as defined by RFC5424. The default value is `local0`.

Table 6.11. gatewayConfig object
Field	Type	Description
`routingViaHost`	`boolean`	Set this field to `true` to send egress traffic from pods to the host networking stack. For highly-specialized installations and applications that rely on manually configured routes in the kernel routing table, you might want to route egress traffic to the host networking stack. By default, egress traffic is processed in OVN to exit the cluster and is not affected by specialized routes in the kernel routing table. The default value is `false`. This field has an interaction with the Open vSwitch hardware offloading feature. If you set this field to `true`, you do not receive the performance benefits of the offloading because egress traffic is processed by the host networking stack.

Example OVN-Kubernetes configuration with IPSec enabled

defaultNetwork:
  type: OVNKubernetes
  ovnKubernetesConfig:
    mtu: 1400
    genevePort: 6081
    ipsecConfig: {}

kubeProxyConfig object configuration

The values for the kubeProxyConfig object are defined in the following table:

Table 6.12. kubeProxyConfig object
Field	Type	Description
`iptablesSyncPeriod`	`string`	The refresh period for `iptables` rules. The default value is `30s`. Valid suffixes include `s`, `m`, and `h` and are described in the Go `time` package documentation. Note Because of performance improvements introduced in OpenShift Container Platform 4.3 and greater, adjusting the `iptablesSyncPeriod` parameter is no longer necessary.
`proxyArguments.iptables-min-sync-period`	`array`	The minimum duration before refreshing `iptables` rules. This field ensures that the refresh does not happen too frequently. Valid suffixes include `s`, `m`, and `h` and are described in the Go `time` package. The default value is: kubeProxyConfig: proxyArguments: iptables-min-sync-period: - 0s

6.8. Specifying advanced network configuration

You can use advanced network configuration for your network plugin to integrate your cluster into your existing network environment. You can specify advanced network configuration only before you install the cluster.

Important

Customizing your network configuration by modifying the OpenShift Container Platform manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.

Prerequisites

You have created the install-config.yaml file and completed any modifications to it.

Procedure

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory> 1
```
1
<installation_directory> specifies the name of the directory that contains the install-config.yaml file for your cluster.
Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:
```
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
```

Specify the advanced network configuration for your cluster in the cluster-network-03-config.yml file, such as in the following examples:

Specify a different VXLAN port for the OpenShift SDN network provider

apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    openshiftSDNConfig:
      vxlanPort: 4800

Enable IPsec for the OVN-Kubernetes network provider

apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      ipsecConfig: {}

Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program consumes the manifests/ directory when you create the Ignition config files.

Note

For more information about using a Network Load Balancer (NLB) on AWS, see Configuring Ingress cluster traffic on AWS using a Network Load Balancer.

6.9. Configuring an Ingress Controller Network Load Balancer on a new AWS cluster

You can create an Ingress Controller backed by an AWS Network Load Balancer (NLB) on a new cluster.

Prerequisites

Create the install-config.yaml file and complete any modifications to it.

Procedure

Create an Ingress Controller backed by an AWS NLB on a new cluster.

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory> 1
```
1
For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.
Create a file that is named cluster-ingress-default-ingresscontroller.yaml in the <installation_directory>/manifests/ directory:
```
$ touch <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml 1
```
1
For <installation_directory>, specify the directory name that contains the manifests/ directory for your cluster.
After creating the file, several network configuration files are in the manifests/ directory, as shown:
```
$ ls <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml
```
Example output
```
cluster-ingress-default-ingresscontroller.yaml
```

Open the cluster-ingress-default-ingresscontroller.yaml file in an editor and enter a custom resource (CR) that describes the Operator configuration you want:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB
    type: LoadBalancerService

Save the cluster-ingress-default-ingresscontroller.yaml file and quit the text editor.
Optional: Back up the manifests/cluster-ingress-default-ingresscontroller.yaml file. The installation program deletes the manifests/ directory when creating the cluster.

6.10. Configuring hybrid networking with OVN-Kubernetes

You can configure your cluster to use hybrid networking with OVN-Kubernetes. This allows a hybrid cluster that supports different node networking configurations. For example, this is necessary to run both Linux and Windows nodes in a cluster.

Important

You must configure hybrid networking with OVN-Kubernetes during the installation of your cluster. You cannot switch to hybrid networking after the installation process.

Prerequisites

You defined OVNKubernetes for the networking.networkType parameter in the install-config.yaml file. See the installation documentation for configuring OpenShift Container Platform network customizations on your chosen cloud provider for more information.

Procedure

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory>
```
where:
<installation_directory>
Specifies the name of the directory that contains the install-config.yaml file for your cluster.
Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:
```
$ cat <<EOF > <installation_directory>/manifests/cluster-network-03-config.yml
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
EOF
```
where:
<installation_directory>
Specifies the directory name that contains the manifests/ directory for your cluster.
Open the cluster-network-03-config.yml file in an editor and configure OVN-Kubernetes with hybrid networking, such as in the following example:
Specify a hybrid networking configuration
```
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      hybridOverlayConfig:
        hybridClusterNetwork: 1
        - cidr: 10.132.0.0/14
          hostPrefix: 23
        hybridOverlayVXLANPort: 9898 2
```
1
Specify the CIDR configuration used for nodes on the additional overlay network. The hybridClusterNetwork CIDR must not overlap with the clusterNetwork CIDR.
2
Specify a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default 4789 port. For more information on this requirement, see the Microsoft documentation on Pod-to-pod connectivity between hosts is broken.
Note
Windows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom hybridOverlayVXLANPort value because this Windows server version does not support selecting a custom VXLAN port.
Save the cluster-network-03-config.yml file and quit the text editor.
Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

Note

For more information on using Linux and Windows nodes in the same cluster, see Understanding Windows container workloads.

6.11. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Verify the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.
Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.
Note
The elevated permissions provided by the AdministratorAccess policy are required only during installation.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.12. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.12. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture from the Product Variant drop-down list.
Select the appropriate version from the Version drop-down list.
Click Download Now next to the OpenShift v4.12 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version from the Version drop-down list.
Click Download Now next to the OpenShift v4.12 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version from the Version drop-down list.
Click Download Now next to the OpenShift v4.12 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.12 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.13. Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

6.14. Logging in to the cluster by using the web console

The kubeadmin user exists by default after an OpenShift Container Platform installation. You can log in to your cluster as the kubeadmin user by using the OpenShift Container Platform web console.

Prerequisites

You have access to the installation host.
You completed a cluster installation and all cluster Operators are available.

Procedure

Obtain the password for the kubeadmin user from the kubeadmin-password file on the installation host:
```
$ cat <installation_directory>/auth/kubeadmin-password
```
Note
Alternatively, you can obtain the kubeadmin password from the <installation_directory>/.openshift_install.log log file on the installation host.
List the OpenShift Container Platform web console route:
```
$ oc get routes -n openshift-console | grep 'console-openshift'
```
Note
Alternatively, you can obtain the OpenShift Container Platform route from the <installation_directory>/.openshift_install.log log file on the installation host.
Example output
```
console     console-openshift-console.apps.<cluster_name>.<base_domain>            console     https   reencrypt/Redirect   None
```
Navigate to the route detailed in the output of the preceding command in a web browser and log in as the kubeadmin user.

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.15. Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.12, the Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, requires internet access. If your cluster is connected to the internet, Telemetry runs automatically, and your cluster is registered to OpenShift Cluster Manager Hybrid Cloud Console.

After you confirm that your OpenShift Cluster Manager Hybrid Cloud Console inventory is correct, either maintained automatically by Telemetry or manually by using OpenShift Cluster Manager, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

Additional resources

See About remote health monitoring for more information about the Telemetry service.

6.16. Next steps

Validating an installation.
Customize your cluster.
If necessary, you can opt out of remote health reporting.
If necessary, you can remove cloud provider credentials.

Chapter 6. Installing a cluster on AWS with network customizations

6.1. Prerequisites

6.2. Internet access for OpenShift Container Platform

6.3. Generating a key pair for cluster node SSH access

6.4. Obtaining the installation program

6.5. Network configuration phases

6.6. Creating the installation configuration file

6.6.1. Installation configuration parameters

6.6.1.1. Required configuration parameters

6.6.1.2. Network configuration parameters

6.6.1.3. Optional configuration parameters

6.6.1.4. Optional AWS configuration parameters

6.6.2. Minimum resource requirements for cluster installation

6.6.3. Tested instance types for AWS

6.6.4. Tested instance types for AWS on 64-bit ARM infrastructures

6.6.5. Sample customized install-config.yaml file for AWS

6.6.6. Configuring the cluster-wide proxy during installation

6.7. Cluster Network Operator configuration

6.7.1. Cluster Network Operator configuration object

defaultNetwork object configuration

Configuration for the OpenShift SDN network plugin

Configuration for the OVN-Kubernetes network plugin

kubeProxyConfig object configuration

6.8. Specifying advanced network configuration

6.9. Configuring an Ingress Controller Network Load Balancer on a new AWS cluster

6.10. Configuring hybrid networking with OVN-Kubernetes

6.11. Deploying the cluster

6.12. Installing the OpenShift CLI by downloading the binary

Installing the OpenShift CLI on Linux

Installing the OpenShift CLI on Windows

Installing the OpenShift CLI on macOS

6.13. Logging in to the cluster by using the CLI

6.14. Logging in to the cluster by using the web console

6.15. Telemetry access for OpenShift Container Platform

6.16. Next steps

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

Making open source more inclusive

About Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links