Chapter 10. Worker nodes for single-node OpenShift clusters

Procedure

1. Log in to OpenShift Cluster Manager and copy your API token.

2. Set the $OFFLINE_TOKEN variable using the copied API token by running the following command:

   $ export OFFLINE_TOKEN=<copied_api_token>

3. Set the $JWT_TOKEN variable using the previously set $OFFLINE_TOKEN variable:

   $ export JWT_TOKEN=$(
     curl \
     --silent \
     --header "Accept: application/json" \
     --header "Content-Type: application/x-www-form-urlencoded" \
     --data-urlencode "grant_type=refresh_token" \
     --data-urlencode "client_id=cloud-services" \
     --data-urlencode "refresh_token=${OFFLINE_TOKEN}" \
     "https://sso.redhat.com/auth/realms/redhat-external/protocol/openid-connect/token" \
     | jq --raw-output ".access_token"
   )

   Note

   The JWT token is valid for 15 minutes only.

Procedure

1. Authenticate against the Assisted Installer REST API and generate a JSON web token (JWT) for your session. The generated JWT token is valid for 15 minutes only.

2. Set the $API_URL variable by running the following command:

   $ export API_URL=<api_url> 1

   1

   Replace <api_url> with the Assisted Installer API URL, for example, https://api.openshift.com

3. Import the single-node OpenShift cluster by running the following commands:

   1. Set the $OPENSHIFT_CLUSTER_ID variable. Log in to the cluster and run the following command:

      $ export OPENSHIFT_CLUSTER_ID=$(oc get clusterversion -o jsonpath='{.items[].spec.clusterID}')

   2. Set the $CLUSTER_REQUEST variable that is used to import the cluster:

      $ export CLUSTER_REQUEST=$(jq --null-input --arg openshift_cluster_id "$OPENSHIFT_CLUSTER_ID" '{
        "api_vip_dnsname": "<api_vip>", 1
        "openshift_cluster_id": $openshift_cluster_id,
        "name": "<openshift_cluster_name>" 2
      }')

      1

      Replace <api_vip> with the hostname for the cluster’s API server. This can be the DNS domain for the API server or the IP address of the single node which the worker node can reach. For example, api.compute-1.example.com.

      2

      Replace <openshift_cluster_name> with the plain text name for the cluster. The cluster name should match the cluster name that was set during the Day 1 cluster installation.

   3. Import the cluster and set the $CLUSTER_ID variable. Run the following command:

      $ CLUSTER_ID=$(curl "$API_URL/api/assisted-install/v2/clusters/import" -H "Authorization: Bearer ${JWT_TOKEN}" -H 'accept: application/json' -H 'Content-Type: application/json' \
        -d "$CLUSTER_REQUEST" | tee /dev/stderr | jq -r '.id')

4. Generate the InfraEnv resource for the cluster and set the $INFRA_ENV_ID variable by running the following commands:

   1. Download the pull secret file from Red Hat OpenShift Cluster Manager at console.redhat.com.

   2. Set the $INFRA_ENV_REQUEST variable:

      export INFRA_ENV_REQUEST=$(jq --null-input \
          --slurpfile pull_secret <path_to_pull_secret_file> \1
          --arg ssh_pub_key "$(cat <path_to_ssh_pub_key>)" \2
          --arg cluster_id "$CLUSTER_ID" '{
        "name": "<infraenv_name>", 3
        "pull_secret": $pull_secret[0] | tojson,
        "cluster_id": $cluster_id,
        "ssh_authorized_key": $ssh_pub_key,
        "image_type": "<iso_image_type>" 4
      }')

      1

      Replace <path_to_pull_secret_file> with the path to the local file containing the downloaded pull secret from Red Hat OpenShift Cluster Manager at console.redhat.com.

      2

      Replace <path_to_ssh_pub_key> with the path to the public SSH key required to access the host. If you do not set this value, you cannot access the host while in discovery mode.

      3

      Replace <infraenv_name> with the plain text name for the InfraEnv resource.

      4

      Replace <iso_image_type> with the ISO image type, either full-iso or minimal-iso.

   3. Post the $INFRA_ENV_REQUEST to the /v2/infra-envs API and set the $INFRA_ENV_ID variable:

      $ INFRA_ENV_ID=$(curl "$API_URL/api/assisted-install/v2/infra-envs" -H "Authorization: Bearer ${JWT_TOKEN}" -H 'accept: application/json' -H 'Content-Type: application/json' -d "$INFRA_ENV_REQUEST" | tee /dev/stderr | jq -r '.id')

5. Get the URL of the discovery ISO for the cluster worker node by running the following command:

   $ curl -s "$API_URL/api/assisted-install/v2/infra-envs/$INFRA_ENV_ID" -H "Authorization: Bearer ${JWT_TOKEN}" | jq -r '.download_url'

   Example output

   https://api.openshift.com/api/assisted-images/images/41b91e72-c33e-42ee-b80f-b5c5bbf6431a?arch=x86_64&image_token=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJleHAiOjE2NTYwMjYzNzEsInN1YiI6IjQxYjkxZTcyLWMzM2UtNDJlZS1iODBmLWI1YzViYmY2NDMxYSJ9.1EX_VGaMNejMhrAvVRBS7PDPIQtbOOc8LtG8OukE1a4&type=minimal-iso&version=4.12

6. Download the ISO:

   $ curl -L -s '<iso_url>' --output rhcos-live-minimal.iso 1

   1

   Replace <iso_url> with the URL for the ISO from the previous step.

7. Boot the new worker host from the downloaded rhcos-live-minimal.iso.

8. Get the list of hosts in the cluster that are not installed. Keep running the following command until the new host shows up:

   $ curl -s "$API_URL/api/assisted-install/v2/clusters/$CLUSTER_ID" -H "Authorization: Bearer ${JWT_TOKEN}" | jq -r '.hosts[] | select(.status != "installed").id'

   Example output

   2294ba03-c264-4f11-ac08-2f1bb2f8c296

9. Set the $HOST_ID variable for the new worker node, for example:

   $ HOST_ID=<host_id> 1

   1

   Replace <host_id> with the host ID from the previous step.

10. Check that the host is ready to install by running the following command:

    Note

    Ensure that you copy the entire command including the complete jq expression.

    $ curl -s $API_URL/api/assisted-install/v2/clusters/$CLUSTER_ID -H "Authorization: Bearer ${JWT_TOKEN}" | jq '
    def host_name($host):
        if (.suggested_hostname // "") == "" then
            if (.inventory // "") == "" then
                "Unknown hostname, please wait"
            else
                .inventory | fromjson | .hostname
            end
        else
            .suggested_hostname
        end;
    
    def is_notable($validation):
        ["failure", "pending", "error"] | any(. == $validation.status);
    
    def notable_validations($validations_info):
        [
            $validations_info // "{}"
            | fromjson
            | to_entries[].value[]
            | select(is_notable(.))
        ];
    
    {
        "Hosts validations": {
            "Hosts": [
                .hosts[]
                | select(.status != "installed")
                | {
                    "id": .id,
                    "name": host_name(.),
                    "status": .status,
                    "notable_validations": notable_validations(.validations_info)
                }
            ]
        },
        "Cluster validations info": {
            "notable_validations": notable_validations(.validations_info)
        }
    }
    ' -r

    Example output

    {
      "Hosts validations": {
        "Hosts": [
          {
            "id": "97ec378c-3568-460c-bc22-df54534ff08f",
            "name": "localhost.localdomain",
            "status": "insufficient",
            "notable_validations": [
              {
                "id": "ntp-synced",
                "status": "failure",
                "message": "Host couldn't synchronize with any NTP server"
              },
              {
                "id": "api-domain-name-resolved-correctly",
                "status": "error",
                "message": "Parse error for domain name resolutions result"
              },
              {
                "id": "api-int-domain-name-resolved-correctly",
                "status": "error",
                "message": "Parse error for domain name resolutions result"
              },
              {
                "id": "apps-domain-name-resolved-correctly",
                "status": "error",
                "message": "Parse error for domain name resolutions result"
              }
            ]
          }
        ]
      },
      "Cluster validations info": {
        "notable_validations": []
      }
    }

11. When the previous command shows that the host is ready, start the installation using the /v2/infra-envs/{infra_env_id}/hosts/{host_id}/actions/install API by running the following command:

    $ curl -X POST -s "$API_URL/api/assisted-install/v2/infra-envs/$INFRA_ENV_ID/hosts/$HOST_ID/actions/install"  -H "Authorization: Bearer ${JWT_TOKEN}"

12. As the installation proceeds, the installation generates pending certificate signing requests (CSRs) for the worker node.

    Important

    You must approve the CSRs to complete the installation.

    Keep running the following API call to monitor the cluster installation:

    $ curl -s "$API_URL/api/assisted-install/v2/clusters/$CLUSTER_ID" -H "Authorization: Bearer ${JWT_TOKEN}" | jq '{
        "Cluster day-2 hosts":
            [
                .hosts[]
                | select(.status != "installed")
                | {id, requested_hostname, status, status_info, progress, status_updated_at, updated_at, infra_env_id, cluster_id, created_at}
            ]
    }'

    Example output

    {
      "Cluster day-2 hosts": [
        {
          "id": "a1c52dde-3432-4f59-b2ae-0a530c851480",
          "requested_hostname": "control-plane-1",
          "status": "added-to-existing-cluster",
          "status_info": "Host has rebooted and no further updates will be posted. Please check console for progress and to possibly approve pending CSRs",
          "progress": {
            "current_stage": "Done",
            "installation_percentage": 100,
            "stage_started_at": "2022-07-08T10:56:20.476Z",
            "stage_updated_at": "2022-07-08T10:56:20.476Z"
          },
          "status_updated_at": "2022-07-08T10:56:20.476Z",
          "updated_at": "2022-07-08T10:57:15.306369Z",
          "infra_env_id": "b74ec0c3-d5b5-4717-a866-5b6854791bd3",
          "cluster_id": "8f721322-419d-4eed-aa5b-61b50ea586ae",
          "created_at": "2022-07-06T22:54:57.161614Z"
        }
      ]
    }

13. Optional: Run the following command to see all the events for the cluster:

    $ curl -s "$API_URL/api/assisted-install/v2/events?cluster_id=$CLUSTER_ID" -H "Authorization: Bearer ${JWT_TOKEN}" | jq -c '.[] | {severity, message, event_time, host_id}'

    Example output

    {"severity":"info","message":"Host compute-0: updated status from insufficient to known (Host is ready to be installed)","event_time":"2022-07-08T11:21:46.346Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}
    {"severity":"info","message":"Host compute-0: updated status from known to installing (Installation is in progress)","event_time":"2022-07-08T11:28:28.647Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}
    {"severity":"info","message":"Host compute-0: updated status from installing to installing-in-progress (Starting installation)","event_time":"2022-07-08T11:28:52.068Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}
    {"severity":"info","message":"Uploaded logs for host compute-0 cluster 8f721322-419d-4eed-aa5b-61b50ea586ae","event_time":"2022-07-08T11:29:47.802Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}
    {"severity":"info","message":"Host compute-0: updated status from installing-in-progress to added-to-existing-cluster (Host has rebooted and no further updates will be posted. Please check console for progress and to possibly approve pending CSRs)","event_time":"2022-07-08T11:29:48.259Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}
    {"severity":"info","message":"Host: compute-0, reached installation stage Rebooting","event_time":"2022-07-08T11:29:48.261Z","host_id":"9d7b3b44-1125-4ad0-9b14-76550087b445"}

14. Log in to the cluster and approve the pending CSRs to complete the installation.