Network APIs


OpenShift Container Platform 4.13

Reference guide for network APIs

Red Hat OpenShift Documentation Team

Abstract

This document describes the OpenShift Container Platform network API objects and their detailed specifications.

Chapter 1. Network APIs

1.1. CloudPrivateIPConfig [cloud.network.openshift.io/v1]

Description
CloudPrivateIPConfig performs an assignment of a private IP address to the primary NIC associated with cloud VMs. This is done by specifying the IP and Kubernetes node which the IP should be assigned to. This CRD is intended to be used by the network plugin which manages the cluster network. The spec side represents the desired state requested by the network plugin, and the status side represents the current state that this CRD’s controller has executed. No users will have permission to modify it, and if a cluster-admin decides to edit it for some reason, their changes will be overwritten the next time the network plugin reconciles the object. Note: the CR’s name must specify the requested private IP address (can be IPv4 or IPv6). Compatibility level 1: Stable within a major release for a minimum of 12 months or 3 minor releases (whichever is longer).
Type
object

1.2. EgressFirewall [k8s.ovn.org/v1]

Description
EgressFirewall describes the current egress firewall for a Namespace. Traffic from a pod to an IP address outside the cluster will be checked against each EgressFirewallRule in the pod’s namespace’s EgressFirewall, in order. If no rule matches (or no EgressFirewall is present) then the traffic will be allowed by default.
Type
object

1.3. EgressIP [k8s.ovn.org/v1]

Description
EgressIP is a CRD allowing the user to define a fixed source IP for all egress traffic originating from any pods which match the EgressIP resource according to its spec definition.
Type
object

1.4. EgressQoS [k8s.ovn.org/v1]

Description
EgressQoS is a CRD that allows the user to define a DSCP value for pods egress traffic on its namespace to specified CIDRs. Traffic from these pods will be checked against each EgressQoSRule in the namespace’s EgressQoS, and if there is a match the traffic is marked with the relevant DSCP value.
Type
object

1.5. Endpoints [v1]

Description

Endpoints is a collection of endpoints that implement the actual service. Example:

 Name: "mysvc",
 Subsets: [
   {
     Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}],
     Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}]
   },
   {
     Addresses: [{"ip": "10.10.3.3"}],
     Ports: [{"name": "a", "port": 93}, {"name": "b", "port": 76}]
   },
]
Type
object

1.6. EndpointSlice [discovery.k8s.io/v1]

Description
EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.
Type
object

1.7. EgressRouter [network.operator.openshift.io/v1]

Description
EgressRouter is a feature allowing the user to define an egress router that acts as a bridge between pods and external systems. The egress router runs a service that redirects egress traffic originating from a pod or a group of pods to a remote external system or multiple destinations as per configuration. It is consumed by the cluster-network-operator. More specifically, given an EgressRouter CR with <name>, the CNO will create and manage: - A service called <name> - An egress pod called <name> - A NAD called <name> Compatibility level 1: Stable within a major release for a minimum of 12 months or 3 minor releases (whichever is longer). EgressRouter is a single egressrouter pod configuration object.
Type
object

1.8. Ingress [networking.k8s.io/v1]

Description
Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend. An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc.
Type
object

1.9. IngressClass [networking.k8s.io/v1]

Description
IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The ingressclass.kubernetes.io/is-default-class annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.
Type
object

1.10. IPPool [whereabouts.cni.cncf.io/v1alpha1]

Description
IPPool is the Schema for the ippools API
Type
object

1.11. NetworkAttachmentDefinition [k8s.cni.cncf.io/v1]

Description
NetworkAttachmentDefinition is a CRD schema specified by the Network Plumbing Working Group to express the intent for attaching pods to one or more logical or physical networks. More information available at: https://github.com/k8snetworkplumbingwg/multi-net-spec
Type
object

1.12. NetworkPolicy [networking.k8s.io/v1]

Description
NetworkPolicy describes what network traffic is allowed for a set of Pods
Type
object

1.13. OverlappingRangeIPReservation [whereabouts.cni.cncf.io/v1alpha1]

Description
OverlappingRangeIPReservation is the Schema for the OverlappingRangeIPReservations API
Type
object

1.14. PodNetworkConnectivityCheck [controlplane.operator.openshift.io/v1alpha1]

Description
PodNetworkConnectivityCheck Compatibility level 4: No compatibility is provided, the API can change at any point for any reason. These capabilities should not be used by applications needing long term support.
Type
object

1.15. Route [route.openshift.io/v1]

Description

A route allows developers to expose services through an HTTP(S) aware load balancing and proxy layer via a public DNS entry. The route may further specify TLS options and a certificate, or specify a public CNAME that the router should also accept for HTTP and HTTPS traffic. An administrator typically configures their router to be visible outside the cluster firewall, and may also add additional security, caching, or traffic controls on the service content. Routers usually talk directly to the service endpoints.

Once a route is created, the host field may not be changed. Generally, routers use the oldest route with a given host when resolving conflicts.

Routers are subject to additional customization and may support additional controls via the annotations field.

Because administrators may configure multiple routers, the route status field is used to return information to clients about the names and states of the route under each router. If a client chooses a duplicate name, for instance, the route status conditions are used to indicate the route cannot be chosen.

To enable HTTP/2 ALPN on a route it requires a custom (non-wildcard) certificate. This prevents connection coalescing by clients, notably web browsers. We do not support HTTP/2 ALPN on routes that use the default certificate because of the risk of connection re-use/coalescing. Routes that do not have their own custom certificate will not be HTTP/2 ALPN-enabled on either the frontend or the backend.

Compatibility level 1: Stable within a major release for a minimum of 12 months or 3 minor releases (whichever is longer).

Type
object

1.16. Service [v1]

Description
Service is a named abstraction of software service (for example, mysql) consisting of local port (for example 3306) that the proxy listens on, and the selector that determines which pods will answer requests sent through the proxy.
Type
object

Chapter 2. CloudPrivateIPConfig [cloud.network.openshift.io/v1]

Description
CloudPrivateIPConfig performs an assignment of a private IP address to the primary NIC associated with cloud VMs. This is done by specifying the IP and Kubernetes node which the IP should be assigned to. This CRD is intended to be used by the network plugin which manages the cluster network. The spec side represents the desired state requested by the network plugin, and the status side represents the current state that this CRD’s controller has executed. No users will have permission to modify it, and if a cluster-admin decides to edit it for some reason, their changes will be overwritten the next time the network plugin reconciles the object. Note: the CR’s name must specify the requested private IP address (can be IPv4 or IPv6). Compatibility level 1: Stable within a major release for a minimum of 12 months or 3 minor releases (whichever is longer).
Type
object
Required
  • spec

2.1. Specification

PropertyTypeDescription

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

spec is the definition of the desired private IP request.

status

object

status is the observed status of the desired private IP request. Read-only.

2.1.1. .spec

Description
spec is the definition of the desired private IP request.
Type
object
PropertyTypeDescription

node

string

node is the node name, as specified by the Kubernetes field: node.metadata.name

2.1.2. .status

Description
status is the observed status of the desired private IP request. Read-only.
Type
object
Required
  • conditions
PropertyTypeDescription

conditions

array

condition is the assignment condition of the private IP and its status

conditions[]

object

Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example, type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions" // other fields }

node

string

node is the node name, as specified by the Kubernetes field: node.metadata.name

2.1.3. .status.conditions

Description
condition is the assignment condition of the private IP and its status
Type
array

2.1.4. .status.conditions[]

Description
Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example, type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions" // other fields }
Type
object
Required
  • lastTransitionTime
  • message
  • reason
  • status
  • type
PropertyTypeDescription

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

message is a human readable message indicating details about the transition. This may be an empty string.

observedGeneration

integer

observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.

reason

string

reason contains a programmatic identifier indicating the reason for the condition’s last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)

2.2. API endpoints

The following API endpoints are available:

  • /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs

    • DELETE: delete collection of CloudPrivateIPConfig
    • GET: list objects of kind CloudPrivateIPConfig
    • POST: create a CloudPrivateIPConfig
  • /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs/{name}

    • DELETE: delete a CloudPrivateIPConfig
    • GET: read the specified CloudPrivateIPConfig
    • PATCH: partially update the specified CloudPrivateIPConfig
    • PUT: replace the specified CloudPrivateIPConfig
  • /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs/{name}/status

    • GET: read status of the specified CloudPrivateIPConfig
    • PATCH: partially update status of the specified CloudPrivateIPConfig
    • PUT: replace status of the specified CloudPrivateIPConfig

2.2.1. /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs

Table 2.1. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete collection of CloudPrivateIPConfig
Table 2.2. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 2.3. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
list objects of kind CloudPrivateIPConfig
Table 2.4. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 2.5. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfigList schema

401 - Unauthorized

Empty

HTTP method
POST
Description
create a CloudPrivateIPConfig
Table 2.6. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 2.7. Body parameters
ParameterTypeDescription

body

CloudPrivateIPConfig schema

 
Table 2.8. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

201 - Created

CloudPrivateIPConfig schema

202 - Accepted

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

2.2.2. /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs/{name}

Table 2.9. Global path parameters
ParameterTypeDescription

name

string

name of the CloudPrivateIPConfig

Table 2.10. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete a CloudPrivateIPConfig
Table 2.11. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 2.12. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 2.13. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
read the specified CloudPrivateIPConfig
Table 2.14. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 2.15. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update the specified CloudPrivateIPConfig
Table 2.16. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 2.17. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 2.18. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace the specified CloudPrivateIPConfig
Table 2.19. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 2.20. Body parameters
ParameterTypeDescription

body

CloudPrivateIPConfig schema

 
Table 2.21. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

201 - Created

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

2.2.3. /apis/cloud.network.openshift.io/v1/cloudprivateipconfigs/{name}/status

Table 2.22. Global path parameters
ParameterTypeDescription

name

string

name of the CloudPrivateIPConfig

Table 2.23. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
GET
Description
read status of the specified CloudPrivateIPConfig
Table 2.24. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 2.25. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update status of the specified CloudPrivateIPConfig
Table 2.26. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 2.27. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 2.28. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace status of the specified CloudPrivateIPConfig
Table 2.29. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 2.30. Body parameters
ParameterTypeDescription

body

CloudPrivateIPConfig schema

 
Table 2.31. HTTP responses
HTTP codeReponse body

200 - OK

CloudPrivateIPConfig schema

201 - Created

CloudPrivateIPConfig schema

401 - Unauthorized

Empty

Chapter 3. EgressFirewall [k8s.ovn.org/v1]

Description
EgressFirewall describes the current egress firewall for a Namespace. Traffic from a pod to an IP address outside the cluster will be checked against each EgressFirewallRule in the pod’s namespace’s EgressFirewall, in order. If no rule matches (or no EgressFirewall is present) then the traffic will be allowed by default.
Type
object
Required
  • spec

3.1. Specification

PropertyTypeDescription

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

Specification of the desired behavior of EgressFirewall.

status

object

Observed status of EgressFirewall

3.1.1. .spec

Description
Specification of the desired behavior of EgressFirewall.
Type
object
Required
  • egress
PropertyTypeDescription

egress

array

a collection of egress firewall rule objects

egress[]

object

EgressFirewallRule is a single egressfirewall rule object

3.1.2. .spec.egress

Description
a collection of egress firewall rule objects
Type
array

3.1.3. .spec.egress[]

Description
EgressFirewallRule is a single egressfirewall rule object
Type
object
Required
  • to
  • type
PropertyTypeDescription

ports

array

ports specify what ports and protocols the rule applies to

ports[]

object

EgressFirewallPort specifies the port to allow or deny traffic to

to

object

to is the target that traffic is allowed/denied to

type

string

type marks this as an "Allow" or "Deny" rule

3.1.4. .spec.egress[].ports

Description
ports specify what ports and protocols the rule applies to
Type
array

3.1.5. .spec.egress[].ports[]

Description
EgressFirewallPort specifies the port to allow or deny traffic to
Type
object
Required
  • port
  • protocol
PropertyTypeDescription

port

integer

port that the traffic must match

protocol

string

protocol (tcp, udp, sctp) that the traffic must match.

3.1.6. .spec.egress[].to

Description
to is the target that traffic is allowed/denied to
Type
object
PropertyTypeDescription

cidrSelector

string

cidrSelector is the CIDR range to allow/deny traffic to. If this is set, dnsName and nodeSelector must be unset.

dnsName

string

dnsName is the domain name to allow/deny traffic to. If this is set, cidrSelector and nodeSelector must be unset.

nodeSelector

object

nodeSelector will allow/deny traffic to the Kubernetes node IP of selected nodes. If this is set, cidrSelector and DNSName must be unset.

3.1.7. .spec.egress[].to.nodeSelector

Description
nodeSelector will allow/deny traffic to the Kubernetes node IP of selected nodes. If this is set, cidrSelector and DNSName must be unset.
Type
object
PropertyTypeDescription

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

3.1.8. .spec.egress[].to.nodeSelector.matchExpressions

Description
matchExpressions is a list of label selector requirements. The requirements are ANDed.
Type
array

3.1.9. .spec.egress[].to.nodeSelector.matchExpressions[]

Description
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
Type
object
Required
  • key
  • operator
PropertyTypeDescription

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

3.1.10. .status

Description
Observed status of EgressFirewall
Type
object
PropertyTypeDescription

status

string

 

3.2. API endpoints

The following API endpoints are available:

  • /apis/k8s.ovn.org/v1/egressfirewalls

    • GET: list objects of kind EgressFirewall
  • /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressfirewalls

    • DELETE: delete collection of EgressFirewall
    • GET: list objects of kind EgressFirewall
    • POST: create an EgressFirewall
  • /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressfirewalls/{name}

    • DELETE: delete an EgressFirewall
    • GET: read the specified EgressFirewall
    • PATCH: partially update the specified EgressFirewall
    • PUT: replace the specified EgressFirewall

3.2.1. /apis/k8s.ovn.org/v1/egressfirewalls

Table 3.1. Global query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method
GET
Description
list objects of kind EgressFirewall
Table 3.2. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewallList schema

401 - Unauthorized

Empty

3.2.2. /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressfirewalls

Table 3.3. Global path parameters
ParameterTypeDescription

namespace

string

object name and auth scope, such as for teams and projects

Table 3.4. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete collection of EgressFirewall
Table 3.5. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 3.6. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
list objects of kind EgressFirewall
Table 3.7. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 3.8. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewallList schema

401 - Unauthorized

Empty

HTTP method
POST
Description
create an EgressFirewall
Table 3.9. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 3.10. Body parameters
ParameterTypeDescription

body

EgressFirewall schema

 
Table 3.11. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewall schema

201 - Created

EgressFirewall schema

202 - Accepted

EgressFirewall schema

401 - Unauthorized

Empty

3.2.3. /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressfirewalls/{name}

Table 3.12. Global path parameters
ParameterTypeDescription

name

string

name of the EgressFirewall

namespace

string

object name and auth scope, such as for teams and projects

Table 3.13. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete an EgressFirewall
Table 3.14. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 3.15. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 3.16. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
read the specified EgressFirewall
Table 3.17. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 3.18. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewall schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update the specified EgressFirewall
Table 3.19. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 3.20. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 3.21. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewall schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace the specified EgressFirewall
Table 3.22. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 3.23. Body parameters
ParameterTypeDescription

body

EgressFirewall schema

 
Table 3.24. HTTP responses
HTTP codeReponse body

200 - OK

EgressFirewall schema

201 - Created

EgressFirewall schema

401 - Unauthorized

Empty

Chapter 4. EgressIP [k8s.ovn.org/v1]

Description
EgressIP is a CRD allowing the user to define a fixed source IP for all egress traffic originating from any pods which match the EgressIP resource according to its spec definition.
Type
object
Required
  • spec

4.1. Specification

PropertyTypeDescription

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

Specification of the desired behavior of EgressIP.

status

object

Observed status of EgressIP. Read-only.

4.1.1. .spec

Description
Specification of the desired behavior of EgressIP.
Type
object
Required
  • egressIPs
  • namespaceSelector
PropertyTypeDescription

egressIPs

array (string)

EgressIPs is the list of egress IP addresses requested. Can be IPv4 and/or IPv6. This field is mandatory.

namespaceSelector

object

NamespaceSelector applies the egress IP only to the namespace(s) whose label matches this definition. This field is mandatory.

podSelector

object

PodSelector applies the egress IP only to the pods whose label matches this definition. This field is optional, and in case it is not set: results in the egress IP being applied to all pods in the namespace(s) matched by the NamespaceSelector. In case it is set: is intersected with the NamespaceSelector, thus applying the egress IP to the pods (in the namespace(s) already matched by the NamespaceSelector) which match this pod selector.

4.1.2. .spec.namespaceSelector

Description
NamespaceSelector applies the egress IP only to the namespace(s) whose label matches this definition. This field is mandatory.
Type
object
PropertyTypeDescription

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

4.1.3. .spec.namespaceSelector.matchExpressions

Description
matchExpressions is a list of label selector requirements. The requirements are ANDed.
Type
array

4.1.4. .spec.namespaceSelector.matchExpressions[]

Description
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
Type
object
Required
  • key
  • operator
PropertyTypeDescription

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

4.1.5. .spec.podSelector

Description
PodSelector applies the egress IP only to the pods whose label matches this definition. This field is optional, and in case it is not set: results in the egress IP being applied to all pods in the namespace(s) matched by the NamespaceSelector. In case it is set: is intersected with the NamespaceSelector, thus applying the egress IP to the pods (in the namespace(s) already matched by the NamespaceSelector) which match this pod selector.
Type
object
PropertyTypeDescription

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

4.1.6. .spec.podSelector.matchExpressions

Description
matchExpressions is a list of label selector requirements. The requirements are ANDed.
Type
array

4.1.7. .spec.podSelector.matchExpressions[]

Description
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
Type
object
Required
  • key
  • operator
PropertyTypeDescription

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

4.1.8. .status

Description
Observed status of EgressIP. Read-only.
Type
object
Required
  • items
PropertyTypeDescription

items

array

The list of assigned egress IPs and their corresponding node assignment.

items[]

object

The per node status, for those egress IPs who have been assigned.

4.1.9. .status.items

Description
The list of assigned egress IPs and their corresponding node assignment.
Type
array

4.1.10. .status.items[]

Description
The per node status, for those egress IPs who have been assigned.
Type
object
Required
  • egressIP
  • node
PropertyTypeDescription

egressIP

string

Assigned egress IP

node

string

Assigned node name

4.2. API endpoints

The following API endpoints are available:

  • /apis/k8s.ovn.org/v1/egressips

    • DELETE: delete collection of EgressIP
    • GET: list objects of kind EgressIP
    • POST: create an EgressIP
  • /apis/k8s.ovn.org/v1/egressips/{name}

    • DELETE: delete an EgressIP
    • GET: read the specified EgressIP
    • PATCH: partially update the specified EgressIP
    • PUT: replace the specified EgressIP

4.2.1. /apis/k8s.ovn.org/v1/egressips

Table 4.1. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete collection of EgressIP
Table 4.2. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 4.3. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
list objects of kind EgressIP
Table 4.4. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 4.5. HTTP responses
HTTP codeReponse body

200 - OK

EgressIPList schema

401 - Unauthorized

Empty

HTTP method
POST
Description
create an EgressIP
Table 4.6. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 4.7. Body parameters
ParameterTypeDescription

body

EgressIP schema

 
Table 4.8. HTTP responses
HTTP codeReponse body

200 - OK

EgressIP schema

201 - Created

EgressIP schema

202 - Accepted

EgressIP schema

401 - Unauthorized

Empty

4.2.2. /apis/k8s.ovn.org/v1/egressips/{name}

Table 4.9. Global path parameters
ParameterTypeDescription

name

string

name of the EgressIP

Table 4.10. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete an EgressIP
Table 4.11. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 4.12. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 4.13. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
read the specified EgressIP
Table 4.14. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 4.15. HTTP responses
HTTP codeReponse body

200 - OK

EgressIP schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update the specified EgressIP
Table 4.16. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 4.17. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 4.18. HTTP responses
HTTP codeReponse body

200 - OK

EgressIP schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace the specified EgressIP
Table 4.19. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 4.20. Body parameters
ParameterTypeDescription

body

EgressIP schema

 
Table 4.21. HTTP responses
HTTP codeReponse body

200 - OK

EgressIP schema

201 - Created

EgressIP schema

401 - Unauthorized

Empty

Chapter 5. EgressQoS [k8s.ovn.org/v1]

Description
EgressQoS is a CRD that allows the user to define a DSCP value for pods egress traffic on its namespace to specified CIDRs. Traffic from these pods will be checked against each EgressQoSRule in the namespace’s EgressQoS, and if there is a match the traffic is marked with the relevant DSCP value.
Type
object

5.1. Specification

PropertyTypeDescription

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

EgressQoSSpec defines the desired state of EgressQoS

status

object

EgressQoSStatus defines the observed state of EgressQoS

5.1.1. .spec

Description
EgressQoSSpec defines the desired state of EgressQoS
Type
object
Required
  • egress
PropertyTypeDescription

egress

array

a collection of Egress QoS rule objects

egress[]

object

 

5.1.2. .spec.egress

Description
a collection of Egress QoS rule objects
Type
array

5.1.3. .spec.egress[]

Description
Type
object
Required
  • dscp
PropertyTypeDescription

dscp

integer

DSCP marking value for matching pods' traffic.

dstCIDR

string

DstCIDR specifies the destination’s CIDR. Only traffic heading to this CIDR will be marked with the DSCP value. This field is optional, and in case it is not set the rule is applied to all egress traffic regardless of the destination.

podSelector

object

PodSelector applies the QoS rule only to the pods in the namespace whose label matches this definition. This field is optional, and in case it is not set results in the rule being applied to all pods in the namespace.

5.1.4. .spec.egress[].podSelector

Description
PodSelector applies the QoS rule only to the pods in the namespace whose label matches this definition. This field is optional, and in case it is not set results in the rule being applied to all pods in the namespace.
Type
object
PropertyTypeDescription

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

5.1.5. .spec.egress[].podSelector.matchExpressions

Description
matchExpressions is a list of label selector requirements. The requirements are ANDed.
Type
array

5.1.6. .spec.egress[].podSelector.matchExpressions[]

Description
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
Type
object
Required
  • key
  • operator
PropertyTypeDescription

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

5.1.7. .status

Description
EgressQoSStatus defines the observed state of EgressQoS
Type
object

5.2. API endpoints

The following API endpoints are available:

  • /apis/k8s.ovn.org/v1/egressqoses

    • GET: list objects of kind EgressQoS
  • /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses

    • DELETE: delete collection of EgressQoS
    • GET: list objects of kind EgressQoS
    • POST: create an EgressQoS
  • /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses/{name}

    • DELETE: delete an EgressQoS
    • GET: read the specified EgressQoS
    • PATCH: partially update the specified EgressQoS
    • PUT: replace the specified EgressQoS
  • /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses/{name}/status

    • GET: read status of the specified EgressQoS
    • PATCH: partially update status of the specified EgressQoS
    • PUT: replace status of the specified EgressQoS

5.2.1. /apis/k8s.ovn.org/v1/egressqoses

Table 5.1. Global query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method
GET
Description
list objects of kind EgressQoS
Table 5.2. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoSList schema

401 - Unauthorized

Empty

5.2.2. /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses

Table 5.3. Global path parameters
ParameterTypeDescription

namespace

string

object name and auth scope, such as for teams and projects

Table 5.4. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete collection of EgressQoS
Table 5.5. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 5.6. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
list objects of kind EgressQoS
Table 5.7. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 5.8. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoSList schema

401 - Unauthorized

Empty

HTTP method
POST
Description
create an EgressQoS
Table 5.9. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 5.10. Body parameters
ParameterTypeDescription

body

EgressQoS schema

 
Table 5.11. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

201 - Created

EgressQoS schema

202 - Accepted

EgressQoS schema

401 - Unauthorized

Empty

5.2.3. /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses/{name}

Table 5.12. Global path parameters
ParameterTypeDescription

name

string

name of the EgressQoS

namespace

string

object name and auth scope, such as for teams and projects

Table 5.13. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete an EgressQoS
Table 5.14. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 5.15. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 5.16. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
read the specified EgressQoS
Table 5.17. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 5.18. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update the specified EgressQoS
Table 5.19. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 5.20. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 5.21. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace the specified EgressQoS
Table 5.22. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 5.23. Body parameters
ParameterTypeDescription

body

EgressQoS schema

 
Table 5.24. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

201 - Created

EgressQoS schema

401 - Unauthorized

Empty

5.2.4. /apis/k8s.ovn.org/v1/namespaces/{namespace}/egressqoses/{name}/status

Table 5.25. Global path parameters
ParameterTypeDescription

name

string

name of the EgressQoS

namespace

string

object name and auth scope, such as for teams and projects

Table 5.26. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
GET
Description
read status of the specified EgressQoS
Table 5.27. Query parameters
ParameterTypeDescription

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 5.28. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

401 - Unauthorized

Empty

HTTP method
PATCH
Description
partially update status of the specified EgressQoS
Table 5.29. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 5.30. Body parameters
ParameterTypeDescription

body

Patch schema

 
Table 5.31. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

401 - Unauthorized

Empty

HTTP method
PUT
Description
replace status of the specified EgressQoS
Table 5.32. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 5.33. Body parameters
ParameterTypeDescription

body

EgressQoS schema

 
Table 5.34. HTTP responses
HTTP codeReponse body

200 - OK

EgressQoS schema

201 - Created

EgressQoS schema

401 - Unauthorized

Empty

Chapter 6. Endpoints [v1]

Description

Endpoints is a collection of endpoints that implement the actual service. Example:

 Name: "mysvc",
 Subsets: [
   {
     Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}],
     Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}]
   },
   {
     Addresses: [{"ip": "10.10.3.3"}],
     Ports: [{"name": "a", "port": 93}, {"name": "b", "port": 76}]
   },
]
Type
object

6.1. Specification

PropertyTypeDescription

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

subsets

array

The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.

subsets[]

object

EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given:

{ Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] }

The resulting set of endpoints can be viewed as:

a: [ 10.10.1.1:8675, 10.10.2.2:8675 ], b: [ 10.10.1.1:309, 10.10.2.2:309 ]

6.1.1. .subsets

Description
The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.
Type
array

6.1.2. .subsets[]

Description

EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given:

{
  Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}],
  Ports:     [{"name": "a", "port": 8675}, {"name": "b", "port": 309}]
}

The resulting set of endpoints can be viewed as:

a: [ 10.10.1.1:8675, 10.10.2.2:8675 ],
b: [ 10.10.1.1:309, 10.10.2.2:309 ]
Type
object
PropertyTypeDescription

addresses

array

IP addresses which offer the related ports that are marked as ready. These endpoints should be considered safe for load balancers and clients to utilize.

addresses[]

object

EndpointAddress is a tuple that describes single IP address.

notReadyAddresses

array

IP addresses which offer the related ports but are not currently marked as ready because they have not yet finished starting, have recently failed a readiness check, or have recently failed a liveness check.

notReadyAddresses[]

object

EndpointAddress is a tuple that describes single IP address.

ports

array

Port numbers available on the related IP addresses.

ports[]

object

EndpointPort is a tuple that describes a single port.

6.1.3. .subsets[].addresses

Description
IP addresses which offer the related ports that are marked as ready. These endpoints should be considered safe for load balancers and clients to utilize.
Type
array

6.1.4. .subsets[].addresses[]

Description
EndpointAddress is a tuple that describes single IP address.
Type
object
Required
  • ip
PropertyTypeDescription

hostname

string

The Hostname of this endpoint

ip

string

The IP of this endpoint. May not be loopback (127.0.0.0/8), link-local (169.254.0.0/16), or link-local multicast ((224.0.0.0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready.

nodeName

string

Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node.

targetRef

object

ObjectReference contains enough information to let you inspect or modify the referred object.

6.1.5. .subsets[].addresses[].targetRef

Description
ObjectReference contains enough information to let you inspect or modify the referred object.
Type
object
PropertyTypeDescription

apiVersion

string

API version of the referent.

fieldPath

string

If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object.

kind

string

Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

namespace

string

Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/

resourceVersion

string

Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency

uid

string

UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids

6.1.6. .subsets[].notReadyAddresses

Description
IP addresses which offer the related ports but are not currently marked as ready because they have not yet finished starting, have recently failed a readiness check, or have recently failed a liveness check.
Type
array

6.1.7. .subsets[].notReadyAddresses[]

Description
EndpointAddress is a tuple that describes single IP address.
Type
object
Required
  • ip
PropertyTypeDescription

hostname

string

The Hostname of this endpoint

ip

string

The IP of this endpoint. May not be loopback (127.0.0.0/8), link-local (169.254.0.0/16), or link-local multicast ((224.0.0.0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready.

nodeName

string

Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node.

targetRef

object

ObjectReference contains enough information to let you inspect or modify the referred object.

6.1.8. .subsets[].notReadyAddresses[].targetRef

Description
ObjectReference contains enough information to let you inspect or modify the referred object.
Type
object
PropertyTypeDescription

apiVersion

string

API version of the referent.

fieldPath

string

If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object.

kind

string

Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

namespace

string

Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/

resourceVersion

string

Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency

uid

string

UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids

6.1.9. .subsets[].ports

Description
Port numbers available on the related IP addresses.
Type
array

6.1.10. .subsets[].ports[]

Description
EndpointPort is a tuple that describes a single port.
Type
object
Required
  • port
PropertyTypeDescription

appProtocol

string

The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.

name

string

The name of this port. This must match the 'name' field in the corresponding ServicePort. Must be a DNS_LABEL. Optional only if one port is defined.

port

integer

The port number of the endpoint.

protocol

string

The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

Possible enum values: - "SCTP" is the SCTP protocol. - "TCP" is the TCP protocol. - "UDP" is the UDP protocol.

6.2. API endpoints

The following API endpoints are available:

  • /api/v1/endpoints

    • GET: list or watch objects of kind Endpoints
  • /api/v1/watch/endpoints

    • GET: watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.
  • /api/v1/namespaces/{namespace}/endpoints

    • DELETE: delete collection of Endpoints
    • GET: list or watch objects of kind Endpoints
    • POST: create Endpoints
  • /api/v1/watch/namespaces/{namespace}/endpoints

    • GET: watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.
  • /api/v1/namespaces/{namespace}/endpoints/{name}

    • DELETE: delete Endpoints
    • GET: read the specified Endpoints
    • PATCH: partially update the specified Endpoints
    • PUT: replace the specified Endpoints
  • /api/v1/watch/namespaces/{namespace}/endpoints/{name}

    • GET: watch changes to an object of kind Endpoints. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

6.2.1. /api/v1/endpoints

Table 6.1. Global query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method
GET
Description
list or watch objects of kind Endpoints
Table 6.2. HTTP responses
HTTP codeReponse body

200 - OK

EndpointsList schema

401 - Unauthorized

Empty

6.2.2. /api/v1/watch/endpoints

Table 6.3. Global query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method
GET
Description
watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.
Table 6.4. HTTP responses
HTTP codeReponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

6.2.3. /api/v1/namespaces/{namespace}/endpoints

Table 6.5. Global path parameters
ParameterTypeDescription

namespace

string

object name and auth scope, such as for teams and projects

Table 6.6. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete collection of Endpoints
Table 6.7. Query parameters
ParameterTypeDescription

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Table 6.8. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 6.9. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
list or watch objects of kind Endpoints
Table 6.10. Query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 6.11. HTTP responses
HTTP codeReponse body

200 - OK

EndpointsList schema

401 - Unauthorized

Empty

HTTP method
POST
Description
create Endpoints
Table 6.12. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 6.13. Body parameters
ParameterTypeDescription

body

Endpoints schema

 
Table 6.14. HTTP responses
HTTP codeReponse body

200 - OK

Endpoints schema

201 - Created

Endpoints schema

202 - Accepted

Endpoints schema

401 - Unauthorized

Empty

6.2.4. /api/v1/watch/namespaces/{namespace}/endpoints

Table 6.15. Global path parameters
ParameterTypeDescription

namespace

string

object name and auth scope, such as for teams and projects

Table 6.16. Global query parameters
ParameterTypeDescription

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method
GET
Description
watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.
Table 6.17. HTTP responses
HTTP codeReponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

6.2.5. /api/v1/namespaces/{namespace}/endpoints/{name}

Table 6.18. Global path parameters
ParameterTypeDescription

name

string

name of the Endpoints

namespace

string

object name and auth scope, such as for teams and projects

Table 6.19. Global query parameters
ParameterTypeDescription

pretty

string

If 'true', then the output is pretty printed.

HTTP method
DELETE
Description
delete Endpoints
Table 6.20. Query parameters
ParameterTypeDescription

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 6.21. Body parameters
ParameterTypeDescription

body

DeleteOptions schema

 
Table 6.22. HTTP responses
HTTP codeReponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method
GET
Description
read the specified Endpoints
Table 6.23. HTTP responses
HTTP codeReponse body

200 - OK