OperatorHub APIs

address

string

Address is a host that OLM can use to connect to a pre-existing registry. Format: <registry-host or ip>:<port> Only used when SourceType = SourceTypeGrpc. Ignored when the Image field is set.

configMap

string

ConfigMap is the name of the ConfigMap to be used to back a configmap-server registry. Only used when SourceType = SourceTypeConfigmap or SourceTypeInternal.

description

string

displayName

string

Metadata

grpcPodConfig

object

GrpcPodConfig exposes different overrides for the pod spec of the CatalogSource Pod. Only used when SourceType = SourceTypeGrpc and Image is set.

icon

object

image

string

Image is an operator-registry container image to instantiate a registry-server with. Only used when SourceType = SourceTypeGrpc. If present, the address field is ignored.

priority

integer

Priority field assigns a weight to the catalog source to prioritize them so that it can be consumed by the dependency resolver. Usage: Higher weight indicates that this catalog source is preferred over lower weighted catalog sources during dependency resolution. The range of the priority value can go from positive to negative in the range of int32. The default value to a catalog source with unassigned priority would be 0. The catalog source with the same priority values will be ranked lexicographically based on its name.

publisher

string

secrets

array (string)

Secrets represent set of secrets that can be used to access the contents of the catalog. It is best to keep this list small, since each will need to be tried for every catalog entry.

sourceType

string

SourceType is the type of source

updateStrategy

object

UpdateStrategy defines how updated catalog source images can be discovered Consists of an interval that defines polling duration and an embedded strategy type

nodeSelector

object (string)

NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node’s labels for the pod to be scheduled on that node.

priorityClassName

string

If specified, indicates the pod’s priority. If not specified, the pod priority will be default or zero if there is no default.

securityContextConfig

string

SecurityContextConfig can be one of legacy or restricted. The CatalogSource’s pod is either injected with the right pod.spec.securityContext and pod.spec.container[*].securityContext values to allow the pod to run in Pod Security Admission (PSA) restricted mode, or doesn’t set these values at all, in which case the pod can only be run in PSA baseline or privileged namespaces. Currently if the SecurityContextConfig is unspecified, the default value of legacy is used. Specifying a value other than legacy or restricted result in a validation error. When using older catalog images, which could not be run in restricted mode, the SecurityContextConfig should be set to legacy. In a future version will the default will be set to restricted, catalog maintainers should rebuild their catalogs with a version of opm that supports running catalogSource pods in restricted mode to prepare for these changes. More information about PSA can be found here: https://kubernetes.io/docs/concepts/security/pod-security-admission/'

tolerations

array

Tolerations are the catalog source’s pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

effect

string

Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.

key

string

Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.

operator

string

Operator represents a key’s relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.

tolerationSeconds

integer

TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.

value

string

Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.

base64data

string

mediatype

string

registryPoll

object

interval

string

Interval is used to determine the time interval between checks of the latest catalog source version. The catalog operator polls to see if a new version of the catalog source is available. If available, the latest image is pulled and gRPC traffic is directed to the latest catalog source.

conditions

array

Represents the state of a CatalogSource. Note that Message and Reason represent the original status information, which may be migrated to be conditions based in the future. Any new features introduced will use conditions.

conditions[]

object

Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example, type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions" // other fields }

configMapReference

object

connectionState

object

latestImageRegistryPoll

string

The last time the CatalogSource image registry has been polled to ensure the image is up-to-date

message

string

A human readable message indicating details about why the CatalogSource is in this condition.

reason

string

Reason is the reason the CatalogSource was transitioned to its current state.

registryService

object

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

message is a human readable message indicating details about the transition. This may be an empty string.

observedGeneration

integer

observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.

reason

string

reason contains a programmatic identifier indicating the reason for the condition’s last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)

lastUpdateTime

string

name

string

namespace

string

resourceVersion

string

uid

string

UID is a type that holds unique ID values, including UUIDs. Because we don’t ONLY use UUIDs, this is an alias to string. Being a type captures intent and helps make sure that UIDs and names do not get conflated.

address

string

lastConnect

string

lastObservedState

string

createdAt

string

port

string

protocol

string

serviceName

string

serviceNamespace

string

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

CatalogSourceList schema

401 - Unauthorized

Empty

namespace

string

object name and auth scope, such as for teams and projects

pretty

string

If 'true', then the output is pretty printed.

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

Status schema

401 - Unauthorized

Empty

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server’s discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the continue field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

200 - OK

CatalogSourceList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

202 - Accepted

CatalogSource schema

401 - Unauthorized

Empty

name

string

name of the CatalogSource

namespace

string

object name and auth scope, such as for teams and projects

pretty

string

If 'true', then the output is pretty printed.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object’s finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

body

DeleteOptions schema

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Patch schema

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

401 - Unauthorized

Empty

name

string

name of the CatalogSource

namespace

string

object name and auth scope, such as for teams and projects

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Patch schema

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields, provided that the ServerSideFieldValidation feature gate is also enabled. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23 and is the default behavior when the ServerSideFieldValidation feature gate is disabled. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default when the ServerSideFieldValidation feature gate is enabled. - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

401 - Unauthorized

Empty

annotations

object (string)

Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata.

apiservicedefinitions

object

APIServiceDefinitions declares all of the extension apis managed or required by an operator being ran by ClusterServiceVersion.

cleanup

object

Cleanup specifies the cleanup behaviour when the CSV gets deleted

customresourcedefinitions

object

CustomResourceDefinitions declares all of the CRDs managed or required by an operator being ran by ClusterServiceVersion. If the CRD is present in the Owned list, it is implicitly required.

description

string

displayName

string

icon

array

icon[]

object

install

object

NamedInstallStrategy represents the block of an ClusterServiceVersion resource where the install strategy is specified.

installModes

array

InstallModes specify supported installation types

installModes[]

object

InstallMode associates an InstallModeType with a flag representing if the CSV supports it

keywords

array (string)

labels

object (string)

Map of string keys and values that can be used to organize and categorize (scope and select) objects.

links

array

links[]

object

maintainers

array

maintainers[]

object

maturity

string

minKubeVersion

string

nativeAPIs

array

nativeAPIs[]

object

GroupVersionKind unambiguously identifies a kind. It doesn’t anonymously include GroupVersion to avoid automatic coercion. It doesn’t use a GroupVersion to avoid custom marshalling

provider

object

relatedImages

array

List any related images, or other container images that your Operator might require to perform their functions. This list should also include operand images as well. All image references should be specified by digest (SHA) and not by tag. This field is only used during catalog creation and plays no part in cluster runtime.

relatedImages[]

object

replaces

string

The name of a CSV this one replaces. Should match the metadata.Name field of the old CSV.

selector

object

Label selector for related resources.

skips

array (string)

The name(s) of one or more CSV(s) that should be skipped in the upgrade graph. Should match the metadata.Name field of the CSV that should be skipped. This field is only used during catalog creation and plays no part in cluster runtime.

version

string

webhookdefinitions

array

webhookdefinitions[]

object

WebhookDescription provides details to OLM about required webhooks

owned

array

owned[]

object

APIServiceDescription provides details to OLM about apis provided via aggregation

required

array

required[]

object

APIServiceDescription provides details to OLM about apis provided via aggregation

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

containerPort

integer

deploymentName

string

description

string

displayName

string

group

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a Kubernetes resource type used by a custom resource

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

name

string

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

containerPort

integer

deploymentName

string

description

string

displayName

string

group

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a Kubernetes resource type used by a custom resource

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

name

string

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

enabled

boolean

owned

array

owned[]

object

CRDDescription provides details to OLM about the CRDs

required

array

required[]

object

CRDDescription provides details to OLM about the CRDs

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

description

string

displayName

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a Kubernetes resource type used by a custom resource

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

name

string

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

description

string

displayName

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a Kubernetes resource type used by a custom resource

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

name

string

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements Marshaler and Unmarshaler and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

base64data

string

mediatype

string

spec

object

StrategyDetailsDeployment represents the parsed details of a Deployment InstallStrategy.

strategy

string

clusterPermissions

array

clusterPermissions[]

object

StrategyDeploymentPermissions describe the rbac rules and service account needed by the install strategy

deployments

array

deployments[]

object

StrategyDeploymentSpec contains the name, spec and labels for the deployment ALM should create

permissions

array

permissions[]

object

StrategyDeploymentPermissions describe the rbac rules and service account needed by the install strategy

rules

array

rules[]

object

PolicyRule holds information that describes a policy rule, but does not contain information about who the rule applies to or which namespace the rule applies to.

serviceAccountName

string

apiGroups

array (string)

APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "" represents the core API group and "*" represents all API groups.

nonResourceURLs

array (string)

NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path Since non-resource URLs are not namespaced, this field is only applicable for ClusterRoles referenced from a ClusterRoleBinding. Rules can either apply to API resources (such as "pods" or "secrets") or non-resource URL paths (such as "/api"), but not both.

resourceNames

array (string)

ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.

resources

array (string)

Resources is a list of resources this rule applies to. '*' represents all resources.

verbs

array (string)

Verbs is a list of Verbs that apply to ALL the ResourceKinds contained in this rule. '*' represents all verbs.

label

object (string)

Set is a map of label:value. It implements Labels.

name

string

spec

object

DeploymentSpec is the specification of the desired behavior of the Deployment.

minReadySeconds

integer

Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)

paused

boolean

Indicates that the deployment is paused.

progressDeadlineSeconds

integer

The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.

replicas

integer

Number of desired pods. This is a pointer to distinguish between explicit zero and not specified. Defaults to 1.

revisionHistoryLimit

integer

The number of old ReplicaSets to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.

selector

object

Label selector for pods. Existing ReplicaSets whose pods are selected by this will be the ones affected by this deployment. It must match the pod template’s labels.

strategy

object

The deployment strategy to use to replace existing pods with new ones.

template

object

Template describes the pods that will be created.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

rollingUpdate

object

Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate. --- TODO: Update this to follow our convention for oneOf, whatever we decide it to be.

type

string

Type of deployment. Can be "Recreate" or "RollingUpdate". Default is RollingUpdate.

maxSurge

integer-or-string

The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.

maxUnavailable

integer-or-string

The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.

metadata

``

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

activeDeadlineSeconds

integer

Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer.

affinity

object

If specified, the pod’s scheduling constraints

automountServiceAccountToken

boolean

AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.

containers

array

List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.

containers[]

object

A single application container that you want to run within a pod.

dnsConfig

object

Specifies the DNS parameters of a pod. Parameters specified here will be merged to the generated DNS configuration based on DNSPolicy.

dnsPolicy

string

Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.

enableServiceLinks

boolean

EnableServiceLinks indicates whether information about services should be injected into pod’s environment variables, matching the syntax of Docker links. Optional: Defaults to true.

ephemeralContainers

array

List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod’s ephemeralcontainers subresource.

ephemeralContainers[]

object

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation. To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

hostAliases

array

HostAliases is an optional list of hosts and IPs that will be injected into the pod’s hosts file if specified. This is only valid for non-hostNetwork pods.

hostAliases[]

object

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostIPC

boolean

Use the host’s ipc namespace. Optional: Default to false.

hostNetwork

boolean

Host networking requested for this pod. Use the host’s network namespace. If this option is set, the ports that will be used must be specified. Default to false.

hostPID

boolean

Use the host’s pid namespace. Optional: Default to false.

hostUsers

boolean

Use the host’s user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.

hostname

string

Specifies the hostname of the Pod If not specified, the pod’s hostname will be set to a system-defined value.

imagePullSecrets

array

ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod

imagePullSecrets[]

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

initContainers

array

List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

initContainers[]

object

A single application container that you want to run within a pod.

nodeName

string

NodeName is a request to schedule this pod onto a specific node. If it is non-empty, the scheduler simply schedules this pod onto that node, assuming that it fits resource requirements.

nodeSelector

object (string)

NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node’s labels for the pod to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/

os

object

Specifies the OS of the containers in the pod. Some pod and container fields are restricted if this is set. If the OS field is set to linux, the following fields must be unset: -securityContext.windowsOptions If the OS field is set to windows, following fields must be unset: - spec.hostPID - spec.hostIPC - spec.hostUsers - spec.securityContext.seLinuxOptions - spec.securityContext.seccompProfile - spec.securityContext.fsGroup - spec.securityContext.fsGroupChangePolicy - spec.securityContext.sysctls - spec.shareProcessNamespace - spec.securityContext.runAsUser - spec.securityContext.runAsGroup - spec.securityContext.supplementalGroups - spec.containers[].securityContext.seLinuxOptions - spec.containers[].securityContext.seccompProfile - spec.containers[].securityContext.capabilities - spec.containers[].securityContext.readOnlyRootFilesystem - spec.containers[].securityContext.privileged - spec.containers[].securityContext.allowPrivilegeEscalation - spec.containers[].securityContext.procMount - spec.containers[].securityContext.runAsUser - spec.containers[*].securityContext.runAsGroup

overhead

integer-or-string

Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md

preemptionPolicy

string

PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.

priority

integer

The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority.

priorityClassName

string

If specified, indicates the pod’s priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.

readinessGates

array

If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates

readinessGates[]

object

PodReadinessGate contains the reference to a pod condition

restartPolicy

string

Restart policy for all containers within the pod. One of Always, OnFailure, Never. Default to Always. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

runtimeClassName

string

RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class

schedulerName

string

If specified, the pod will be dispatched by specified scheduler. If not specified, the pod will be dispatched by default scheduler.

securityContext

object

SecurityContext holds pod-level security attributes and common container settings. Optional: Defaults to empty. See type description for default values of each field.

serviceAccount

string

DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. Deprecated: Use serviceAccountName instead.

serviceAccountName

string

ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

setHostnameAsFQDN

boolean

If true the pod’s hostname will be configured as the pod’s FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false.

shareProcessNamespace

boolean

Share a single process namespace between all of the containers in a pod. When this is set containers will be able to view and signal processes from other containers in the same pod, and the first process in each container will not be assigned PID 1. HostPID and ShareProcessNamespace cannot both be set. Optional: Default to false.

subdomain

string

If specified, the fully qualified Pod hostname will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>". If not specified, the pod will not have a domainname at all.

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds.

tolerations

array

If specified, the pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

topologySpreadConstraints

array

TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed.

topologySpreadConstraints[]

object

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

volumes

array

List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes

volumes[]

object

Volume represents a named volume in a pod that may be accessed by any container in the pod.

nodeAffinity

object

Describes node affinity scheduling rules for the pod.

podAffinity

object

Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).

podAntiAffinity

object

Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

preference

object

A node selector term, associated with the corresponding weight.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions