Chapter 2. Builds
2.1. Understanding image builds
2.1.1. Builds
A build is the process of transforming input parameters into a resulting object. Most often, the process is used to transform input parameters or source code into a runnable image. A BuildConfig
object is the definition of the entire build process.
OpenShift Container Platform uses Kubernetes by creating containers from build images and pushing them to a container image registry.
Build objects share common characteristics including inputs for a build, the requirement to complete a build process, logging the build process, publishing resources from successful builds, and publishing the final status of the build. Builds take advantage of resource restrictions, specifying limitations on resources such as CPU usage, memory usage, and build or pod execution time.
The OpenShift Container Platform build system provides extensible support for build strategies that are based on selectable types specified in the build API. There are three primary build strategies available:
- Docker build
- Source-to-image (S2I) build
- Custom build
By default, docker builds and S2I builds are supported.
The resulting object of a build depends on the builder used to create it. For docker and S2I builds, the resulting objects are runnable images. For custom builds, the resulting objects are whatever the builder image author has specified.
Additionally, the pipeline build strategy can be used to implement sophisticated workflows:
- Continuous integration
- Continuous deployment
2.1.1.1. Docker build
OpenShift Container Platform uses Buildah to build a container image from a Dockerfile. For more information on building container images with Dockerfiles, see the Dockerfile reference documentation.
If you set Docker build arguments by using the buildArgs
array, see Understand how ARG and FROM interact in the Dockerfile reference documentation.
2.1.1.2. Source-to-image build
Source-to-image (S2I) is a tool for building reproducible container images. It produces ready-to-run images by injecting application source into a container image and assembling a new image. The new image incorporates the base image, the builder, and built source and is ready to use with the buildah run
command. S2I supports incremental builds, which re-use previously downloaded dependencies, previously built artifacts, and so on.
2.1.1.3. Custom build
The custom build strategy allows developers to define a specific builder image responsible for the entire build process. Using your own builder image allows you to customize your build process.
A custom builder image is a plain container image embedded with build process logic, for example for building RPMs or base images.
Custom builds run with a high level of privilege and are not available to users by default. Only users who can be trusted with cluster administration permissions should be granted access to run custom builds.
2.1.1.4. Pipeline build
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
The Pipeline build strategy allows developers to define a Jenkins pipeline for use by the Jenkins pipeline plugin. The build can be started, monitored, and managed by OpenShift Container Platform in the same way as any other build type.
Pipeline workflows are defined in a jenkinsfile
, either embedded directly in the build configuration, or supplied in a Git repository and referenced by the build configuration.
2.2. Understanding build configurations
The following sections define the concept of a build, build configuration, and outline the primary build strategies available.
2.2.1. BuildConfigs
A build configuration describes a single build definition and a set of triggers for when a new build is created. Build configurations are defined by a BuildConfig
, which is a REST object that can be used in a POST to the API server to create a new instance.
A build configuration, or BuildConfig
, is characterized by a build strategy and one or more sources. The strategy determines the process, while the sources provide its input.
Depending on how you choose to create your application using OpenShift Container Platform, a BuildConfig
is typically generated automatically for you if you use the web console or CLI, and it can be edited at any time. Understanding the parts that make up a BuildConfig
and their available options can help if you choose to manually change your configuration later.
The following example BuildConfig
results in a new build every time a container image tag or the source code changes:
BuildConfig
object definition
kind: BuildConfig apiVersion: build.openshift.io/v1 metadata: name: "ruby-sample-build" 1 spec: runPolicy: "Serial" 2 triggers: 3 - type: "GitHub" github: secret: "secret101" - type: "Generic" generic: secret: "secret101" - type: "ImageChange" source: 4 git: uri: "https://github.com/openshift/ruby-hello-world" strategy: 5 sourceStrategy: from: kind: "ImageStreamTag" name: "ruby-20-centos7:latest" output: 6 to: kind: "ImageStreamTag" name: "origin-ruby-sample:latest" postCommit: 7 script: "bundle exec rake test"
- 1
- This specification creates a new
BuildConfig
namedruby-sample-build
. - 2
- The
runPolicy
field controls whether builds created from this build configuration can be run simultaneously. The default value isSerial
, which means new builds run sequentially, not simultaneously. - 3
- You can specify a list of triggers, which cause a new build to be created.
- 4
- The
source
section defines the source of the build. The source type determines the primary source of input, and can be eitherGit
, to point to a code repository location,Dockerfile
, to build from an inline Dockerfile, orBinary
, to accept binary payloads. It is possible to have multiple sources at once. For more information about each source type, see "Creating build inputs". - 5
- The
strategy
section describes the build strategy used to execute the build. You can specify aSource
,Docker
, orCustom
strategy here. This example uses theruby-20-centos7
container image that Source-to-image (S2I) uses for the application build. - 6
- After the container image is successfully built, it is pushed into the repository described in the
output
section. - 7
- The
postCommit
section defines an optional build hook.
2.3. Creating build inputs
Use the following sections for an overview of build inputs, instructions on how to use inputs to provide source content for builds to operate on, and how to use build environments and create secrets.
2.3.1. Build inputs
A build input provides source content for builds to operate on. You can use the following build inputs to provide sources in OpenShift Container Platform, listed in order of precedence:
- Inline Dockerfile definitions
- Content extracted from existing images
- Git repositories
- Binary (Local) inputs
- Input secrets
- External artifacts
You can combine multiple inputs in a single build. However, as the inline Dockerfile takes precedence, it can overwrite any other file named Dockerfile provided by another input. Binary (local) input and Git repositories are mutually exclusive inputs.
You can use input secrets when you do not want certain resources or credentials used during a build to be available in the final application image produced by the build, or want to consume a value that is defined in a secret resource. External artifacts can be used to pull in additional files that are not available as one of the other build input types.
When you run a build:
- A working directory is constructed and all input content is placed in the working directory. For example, the input Git repository is cloned into the working directory, and files specified from input images are copied into the working directory using the target path.
-
The build process changes directories into the
contextDir
, if one is defined. - The inline Dockerfile, if any, is written to the current directory.
-
The content from the current directory is provided to the build process for reference by the Dockerfile, custom builder logic, or
assemble
script. This means any input content that resides outside thecontextDir
is ignored by the build.
The following example of a source definition includes multiple input types and an explanation of how they are combined. For more details on how each input type is defined, see the specific sections for each input type.
source: git: uri: https://github.com/openshift/ruby-hello-world.git 1 ref: "master" images: - from: kind: ImageStreamTag name: myinputimage:latest namespace: mynamespace paths: - destinationDir: app/dir/injected/dir 2 sourcePath: /usr/lib/somefile.jar contextDir: "app/dir" 3 dockerfile: "FROM centos:7\nRUN yum install -y httpd" 4
- 1
- The repository to be cloned into the working directory for the build.
- 2
/usr/lib/somefile.jar
frommyinputimage
is stored in<workingdir>/app/dir/injected/dir
.- 3
- The working directory for the build becomes
<original_workingdir>/app/dir
. - 4
- A Dockerfile with this content is created in
<original_workingdir>/app/dir
, overwriting any existing file with that name.
2.3.2. Dockerfile source
When you supply a dockerfile
value, the content of this field is written to disk as a file named dockerfile
. This is done after other input sources are processed, so if the input source repository contains a Dockerfile in the root directory, it is overwritten with this content.
The source definition is part of the spec
section in the BuildConfig
:
source:
dockerfile: "FROM centos:7\nRUN yum install -y httpd" 1
- 1
- The
dockerfile
field contains an inline Dockerfile that is built.
Additional resources
- The typical use for this field is to provide a Dockerfile to a docker strategy build.
2.3.3. Image source
You can add additional files to the build process with images. Input images are referenced in the same way the From
and To
image targets are defined. This means both container images and image stream tags can be referenced. In conjunction with the image, you must provide one or more path pairs to indicate the path of the files or directories to copy the image and the destination to place them in the build context.
The source path can be any absolute path within the image specified. The destination must be a relative directory path. At build time, the image is loaded and the indicated files and directories are copied into the context directory of the build process. This is the same directory into which the source repository content is cloned. If the source path ends in /.
then the content of the directory is copied, but the directory itself is not created at the destination.
Image inputs are specified in the source
definition of the BuildConfig
:
source: git: uri: https://github.com/openshift/ruby-hello-world.git ref: "master" images: 1 - from: 2 kind: ImageStreamTag name: myinputimage:latest namespace: mynamespace paths: 3 - destinationDir: injected/dir 4 sourcePath: /usr/lib/somefile.jar 5 - from: kind: ImageStreamTag name: myotherinputimage:latest namespace: myothernamespace pullSecret: mysecret 6 paths: - destinationDir: injected/dir sourcePath: /usr/lib/somefile.jar
- 1
- An array of one or more input images and files.
- 2
- A reference to the image containing the files to be copied.
- 3
- An array of source/destination paths.
- 4
- The directory relative to the build root where the build process can access the file.
- 5
- The location of the file to be copied out of the referenced image.
- 6
- An optional secret provided if credentials are needed to access the input image.Note
If your cluster uses an
ImageContentSourcePolicy
object to configure repository mirroring, you can use only global pull secrets for mirrored registries. You cannot add a pull secret to a project.
Optionally, if an input image requires a pull secret, you can link the pull secret to the service account used by the build. By default, builds use the builder
service account. The pull secret is automatically added to the build if the secret contains a credential that matches the repository hosting the input image. To link a pull secret to the service account used by the build, run:
$ oc secrets link builder dockerhub
This feature is not supported for builds using the custom strategy.
2.3.4. Git source
When specified, source code is fetched from the supplied location.
If you supply an inline Dockerfile, it overwrites the Dockerfile in the contextDir
of the Git repository.
The source definition is part of the spec
section in the BuildConfig
:
source: git: 1 uri: "https://github.com/openshift/ruby-hello-world" ref: "master" contextDir: "app/dir" 2 dockerfile: "FROM openshift/ruby-22-centos7\nUSER example" 3
- 1
- The
git
field contains the URI to the remote Git repository of the source code. Optionally, specify theref
field to check out a specific Git reference. A validref
can be a SHA1 tag or a branch name. - 2
- The
contextDir
field allows you to override the default location inside the source code repository where the build looks for the application source code. If your application exists inside a sub-directory, you can override the default location (the root folder) using this field. - 3
- If the optional
dockerfile
field is provided, it should be a string containing a Dockerfile that overwrites any Dockerfile that may exist in the source repository.
If the ref
field denotes a pull request, the system uses a git fetch
operation and then checkout FETCH_HEAD
.
When no ref
value is provided, OpenShift Container Platform performs a shallow clone (--depth=1
). In this case, only the files associated with the most recent commit on the default branch (typically master
) are downloaded. This results in repositories downloading faster, but without the full commit history. To perform a full git clone
of the default branch of a specified repository, set ref
to the name of the default branch (for example master
).
Git clone operations that go through a proxy that is performing man in the middle (MITM) TLS hijacking or reencrypting of the proxied connection do not work.
2.3.4.1. Using a proxy
If your Git repository can only be accessed using a proxy, you can define the proxy to use in the source
section of the build configuration. You can configure both an HTTP and HTTPS proxy to use. Both fields are optional. Domains for which no proxying should be performed can also be specified in the NoProxy
field.
Your source URI must use the HTTP or HTTPS protocol for this to work.
source: git: uri: "https://github.com/openshift/ruby-hello-world" ref: "master" httpProxy: http://proxy.example.com httpsProxy: https://proxy.example.com noProxy: somedomain.com, otherdomain.com
For Pipeline strategy builds, given the current restrictions with the Git plugin for Jenkins, any Git operations through the Git plugin do not leverage the HTTP or HTTPS proxy defined in the BuildConfig
. The Git plugin only uses the proxy configured in the Jenkins UI at the Plugin Manager panel. This proxy is then used for all git interactions within Jenkins, across all jobs.
Additional resources
- You can find instructions on how to configure proxies through the Jenkins UI at JenkinsBehindProxy.
2.3.4.2. Source Clone Secrets
Builder pods require access to any Git repositories defined as source for a build. Source clone secrets are used to provide the builder pod with access it would not normally have access to, such as private repositories or repositories with self-signed or untrusted SSL certificates.
The following source clone secret configurations are supported:
- .gitconfig File
- Basic Authentication
- SSH Key Authentication
- Trusted Certificate Authorities
You can also use combinations of these configurations to meet your specific needs.
2.3.4.2.1. Automatically adding a source clone secret to a build configuration
When a BuildConfig
is created, OpenShift Container Platform can automatically populate its source clone secret reference. This behavior allows the resulting builds to automatically use the credentials stored in the referenced secret to authenticate to a remote Git repository, without requiring further configuration.
To use this functionality, a secret containing the Git repository credentials must exist in the namespace in which the BuildConfig
is later created. This secrets must include one or more annotations prefixed with build.openshift.io/source-secret-match-uri-
. The value of each of these annotations is a Uniform Resource Identifier (URI) pattern, which is defined as follows. When a BuildConfig
is created without a source clone secret reference and its Git source URI matches a URI pattern in a secret annotation, OpenShift Container Platform automatically inserts a reference to that secret in the BuildConfig
.
Prerequisites
A URI pattern must consist of:
-
A valid scheme:
*://
,git://
,http://
,https://
orssh://
-
A host: *` or a valid hostname or IP address optionally preceded by
*.
-
A path:
/*
or/
followed by any characters optionally including*
characters
In all of the above, a *
character is interpreted as a wildcard.
URI patterns must match Git source URIs which are conformant to RFC3986. Do not include a username (or password) component in a URI pattern.
For example, if you use ssh://git@bitbucket.atlassian.com:7999/ATLASSIAN jira.git
for a git repository URL, the source secret must be specified as ssh://bitbucket.atlassian.com:7999/*
(and not ssh://git@bitbucket.atlassian.com:7999/*
).
$ oc annotate secret mysecret \ 'build.openshift.io/source-secret-match-uri-1=ssh://bitbucket.atlassian.com:7999/*'
Procedure
If multiple secrets match the Git URI of a particular BuildConfig
, OpenShift Container Platform selects the secret with the longest match. This allows for basic overriding, as in the following example.
The following fragment shows two partial source clone secrets, the first matching any server in the domain mycorp.com
accessed by HTTPS, and the second overriding access to servers mydev1.mycorp.com
and mydev2.mycorp.com
:
kind: Secret apiVersion: v1 metadata: name: matches-all-corporate-servers-https-only annotations: build.openshift.io/source-secret-match-uri-1: https://*.mycorp.com/* data: ... --- kind: Secret apiVersion: v1 metadata: name: override-for-my-dev-servers-https-only annotations: build.openshift.io/source-secret-match-uri-1: https://mydev1.mycorp.com/* build.openshift.io/source-secret-match-uri-2: https://mydev2.mycorp.com/* data: ...
Add a
build.openshift.io/source-secret-match-uri-
annotation to a pre-existing secret using:$ oc annotate secret mysecret \ 'build.openshift.io/source-secret-match-uri-1=https://*.mycorp.com/*'
2.3.4.2.2. Manually adding a source clone secret
Source clone secrets can be added manually to a build configuration by adding a sourceSecret
field to the source
section inside the BuildConfig
and setting it to the name of the secret that you created. In this example, it is the basicsecret
.
apiVersion: "v1" kind: "BuildConfig" metadata: name: "sample-build" spec: output: to: kind: "ImageStreamTag" name: "sample-image:latest" source: git: uri: "https://github.com/user/app.git" sourceSecret: name: "basicsecret" strategy: sourceStrategy: from: kind: "ImageStreamTag" name: "python-33-centos7:latest"
Procedure
You can also use the oc set build-secret
command to set the source clone secret on an existing build configuration.
To set the source clone secret on an existing build configuration, enter the following command:
$ oc set build-secret --source bc/sample-build basicsecret
2.3.4.2.3. Creating a secret from a .gitconfig file
If the cloning of your application is dependent on a .gitconfig
file, then you can create a secret that contains it. Add it to the builder service account and then your BuildConfig
.
Procedure
-
To create a secret from a
.gitconfig
file:
$ oc create secret generic <secret_name> --from-file=<path/to/.gitconfig>
SSL verification can be turned off if sslVerify=false
is set for the http
section in your .gitconfig
file:
[http] sslVerify=false
2.3.4.2.4. Creating a secret from a .gitconfig file for secured Git
If your Git server is secured with two-way SSL and user name with password, you must add the certificate files to your source build and add references to the certificate files in the .gitconfig
file.
Prerequisites
- You must have Git credentials.
Procedure
Add the certificate files to your source build and add references to the certificate files in the .gitconfig
file.
-
Add the
client.crt
,cacert.crt
, andclient.key
files to the/var/run/secrets/openshift.io/source/
folder in the application source code. In the
.gitconfig
file for the server, add the[http]
section shown in the following example:# cat .gitconfig
Example output
[user] name = <name> email = <email> [http] sslVerify = false sslCert = /var/run/secrets/openshift.io/source/client.crt sslKey = /var/run/secrets/openshift.io/source/client.key sslCaInfo = /var/run/secrets/openshift.io/source/cacert.crt
Create the secret:
$ oc create secret generic <secret_name> \ --from-literal=username=<user_name> \ 1 --from-literal=password=<password> \ 2 --from-file=.gitconfig=.gitconfig \ --from-file=client.crt=/var/run/secrets/openshift.io/source/client.crt \ --from-file=cacert.crt=/var/run/secrets/openshift.io/source/cacert.crt \ --from-file=client.key=/var/run/secrets/openshift.io/source/client.key
To avoid having to enter your password again, be sure to specify the source-to-image (S2I) image in your builds. However, if you cannot clone the repository, you must still specify your user name and password to promote the build.
Additional resources
-
/var/run/secrets/openshift.io/source/
folder in the application source code.
2.3.4.2.5. Creating a secret from source code basic authentication
Basic authentication requires either a combination of --username
and --password
, or a token to authenticate against the software configuration management (SCM) server.
Prerequisites
- User name and password to access the private repository.
Procedure
Create the secret first before using the
--username
and--password
to access the private repository:$ oc create secret generic <secret_name> \ --from-literal=username=<user_name> \ --from-literal=password=<password> \ --type=kubernetes.io/basic-auth
Create a basic authentication secret with a token:
$ oc create secret generic <secret_name> \ --from-literal=password=<token> \ --type=kubernetes.io/basic-auth
2.3.4.2.6. Creating a secret from source code SSH key authentication
SSH key based authentication requires a private SSH key.
The repository keys are usually located in the $HOME/.ssh/
directory, and are named id_dsa.pub
, id_ecdsa.pub
, id_ed25519.pub
, or id_rsa.pub
by default.
Procedure
Generate SSH key credentials:
$ ssh-keygen -t ed25519 -C "your_email@example.com"
NoteCreating a passphrase for the SSH key prevents OpenShift Container Platform from building. When prompted for a passphrase, leave it blank.
Two files are created: the public key and a corresponding private key (one of
id_dsa
,id_ecdsa
,id_ed25519
, orid_rsa
). With both of these in place, consult your source control management (SCM) system’s manual on how to upload the public key. The private key is used to access your private repository.Before using the SSH key to access the private repository, create the secret:
$ oc create secret generic <secret_name> \ --from-file=ssh-privatekey=<path/to/ssh/private/key> \ --from-file=<path/to/known_hosts> \ 1 --type=kubernetes.io/ssh-auth
- 1
- Optional: Adding this field enables strict server host key check.
WarningSkipping the
known_hosts
file while creating the secret makes the build vulnerable to a potential man-in-the-middle (MITM) attack.NoteEnsure that the
known_hosts
file includes an entry for the host of your source code.
2.3.4.2.7. Creating a secret from source code trusted certificate authorities
The set of Transport Layer Security (TLS) certificate authorities (CA) that are trusted during a Git clone operation are built into the OpenShift Container Platform infrastructure images. If your Git server uses a self-signed certificate or one signed by an authority not trusted by the image, you can create a secret that contains the certificate or disable TLS verification.
If you create a secret for the CA certificate, OpenShift Container Platform uses it to access your Git server during the Git clone operation. Using this method is significantly more secure than disabling Git SSL verification, which accepts any TLS certificate that is presented.
Procedure
Create a secret with a CA certificate file.
If your CA uses Intermediate Certificate Authorities, combine the certificates for all CAs in a
ca.crt
file. Enter the following command:$ cat intermediateCA.crt intermediateCA.crt rootCA.crt > ca.crt
Create the secret:
$ oc create secret generic mycert --from-file=ca.crt=</path/to/file> 1
- 1
- You must use the key name
ca.crt
.
2.3.4.2.8. Source secret combinations
You can combine the different methods for creating source clone secrets for your specific needs.
2.3.4.2.8.1. Creating a SSH-based authentication secret with a .gitconfig
file
You can combine the different methods for creating source clone secrets for your specific needs, such as a SSH-based authentication secret with a .gitconfig
file.
Prerequisites
- SSH authentication
- .gitconfig file
Procedure
To create a SSH-based authentication secret with a
.gitconfig
file, run:$ oc create secret generic <secret_name> \ --from-file=ssh-privatekey=<path/to/ssh/private/key> \ --from-file=<path/to/.gitconfig> \ --type=kubernetes.io/ssh-auth
2.3.4.2.8.2. Creating a secret that combines a .gitconfig file and CA certificate
You can combine the different methods for creating source clone secrets for your specific needs, such as a secret that combines a .gitconfig
file and certificate authority (CA) certificate.
Prerequisites
- .gitconfig file
- CA certificate
Procedure
To create a secret that combines a
.gitconfig
file and CA certificate, run:$ oc create secret generic <secret_name> \ --from-file=ca.crt=<path/to/certificate> \ --from-file=<path/to/.gitconfig>
2.3.4.2.8.3. Creating a basic authentication secret with a CA certificate
You can combine the different methods for creating source clone secrets for your specific needs, such as a secret that combines a basic authentication and certificate authority (CA) certificate.
Prerequisites
- Basic authentication credentials
- CA certificate
Procedure
Create a basic authentication secret with a CA certificate, run:
$ oc create secret generic <secret_name> \ --from-literal=username=<user_name> \ --from-literal=password=<password> \ --from-file=ca-cert=</path/to/file> \ --type=kubernetes.io/basic-auth
2.3.4.2.8.4. Creating a basic authentication secret with a .gitconfig file
You can combine the different methods for creating source clone secrets for your specific needs, such as a secret that combines a basic authentication and .gitconfig
file.
Prerequisites
- Basic authentication credentials
-
.gitconfig
file
Procedure
To create a basic authentication secret with a
.gitconfig
file, run:$ oc create secret generic <secret_name> \ --from-literal=username=<user_name> \ --from-literal=password=<password> \ --from-file=</path/to/.gitconfig> \ --type=kubernetes.io/basic-auth
2.3.4.2.8.5. Creating a basic authentication secret with a .gitconfig file and CA certificate
You can combine the different methods for creating source clone secrets for your specific needs, such as a secret that combines a basic authentication, .gitconfig
file, and certificate authority (CA) certificate.
Prerequisites
- Basic authentication credentials
-
.gitconfig
file - CA certificate
Procedure
To create a basic authentication secret with a
.gitconfig
file and CA certificate, run:$ oc create secret generic <secret_name> \ --from-literal=username=<user_name> \ --from-literal=password=<password> \ --from-file=</path/to/.gitconfig> \ --from-file=ca-cert=</path/to/file> \ --type=kubernetes.io/basic-auth
2.3.5. Binary (local) source
Streaming content from a local file system to the builder is called a Binary
type build. The corresponding value of BuildConfig.spec.source.type
is Binary
for these builds.
This source type is unique in that it is leveraged solely based on your use of the oc start-build
.
Binary type builds require content to be streamed from the local file system, so automatically triggering a binary type build, like an image change trigger, is not possible. This is because the binary files cannot be provided. Similarly, you cannot launch binary type builds from the web console.
To utilize binary builds, invoke oc start-build
with one of these options:
-
--from-file
: The contents of the file you specify are sent as a binary stream to the builder. You can also specify a URL to a file. Then, the builder stores the data in a file with the same name at the top of the build context. -
--from-dir
and--from-repo
: The contents are archived and sent as a binary stream to the builder. Then, the builder extracts the contents of the archive within the build context directory. With--from-dir
, you can also specify a URL to an archive, which is extracted. -
--from-archive
: The archive you specify is sent to the builder, where it is extracted within the build context directory. This option behaves the same as--from-dir
; an archive is created on your host first, whenever the argument to these options is a directory.
In each of the previously listed cases:
-
If your
BuildConfig
already has aBinary
source type defined, it is effectively ignored and replaced by what the client sends. -
If your
BuildConfig
has aGit
source type defined, it is dynamically disabled, sinceBinary
andGit
are mutually exclusive, and the data in the binary stream provided to the builder takes precedence.
Instead of a file name, you can pass a URL with HTTP or HTTPS schema to --from-file
and --from-archive
. When using --from-file
with a URL, the name of the file in the builder image is determined by the Content-Disposition
header sent by the web server, or the last component of the URL path if the header is not present. No form of authentication is supported and it is not possible to use custom TLS certificate or disable certificate validation.
When using oc new-build --binary=true
, the command ensures that the restrictions associated with binary builds are enforced. The resulting BuildConfig
has a source type of Binary
, meaning that the only valid way to run a build for this BuildConfig
is to use oc start-build
with one of the --from
options to provide the requisite binary data.
The Dockerfile and contextDir
source options have special meaning with binary builds.
Dockerfile can be used with any binary build source. If Dockerfile is used and the binary stream is an archive, its contents serve as a replacement Dockerfile to any Dockerfile in the archive. If Dockerfile is used with the --from-file
argument, and the file argument is named Dockerfile, the value from Dockerfile replaces the value from the binary stream.
In the case of the binary stream encapsulating extracted archive content, the value of the contextDir
field is interpreted as a subdirectory within the archive, and, if valid, the builder changes into that subdirectory before executing the build.
2.3.6. Input secrets and config maps
To prevent the contents of input secrets and config maps from appearing in build output container images, use build volumes in your Docker build and source-to-image build strategies.
In some scenarios, build operations require credentials or other configuration data to access dependent resources, but it is undesirable for that information to be placed in source control. You can define input secrets and input config maps for this purpose.
For example, when building a Java application with Maven, you can set up a private mirror of Maven Central or JCenter that is accessed by private keys. To download libraries from that private mirror, you have to supply the following:
-
A
settings.xml
file configured with the mirror’s URL and connection settings. -
A private key referenced in the settings file, such as
~/.ssh/id_rsa
.
For security reasons, you do not want to expose your credentials in the application image.
This example describes a Java application, but you can use the same approach for adding SSL certificates into the /etc/ssl/certs
directory, API keys or tokens, license files, and more.
2.3.6.1. What is a secret?
The Secret
object type provides a mechanism to hold sensitive information such as passwords, OpenShift Container Platform client configuration files, dockercfg
files, private source repository credentials, and so on. Secrets decouple sensitive content from the pods. You can mount secrets into containers using a volume plugin or the system can use secrets to perform actions on behalf of a pod.
YAML Secret Object Definition
apiVersion: v1 kind: Secret metadata: name: test-secret namespace: my-namespace type: Opaque 1 data: 2 username: dmFsdWUtMQ0K 3 password: dmFsdWUtMg0KDQo= stringData: 4 hostname: myapp.mydomain.com 5
- 1
- Indicates the structure of the secret’s key names and values.
- 2
- The allowable format for the keys in the
data
field must meet the guidelines in theDNS_SUBDOMAIN
value in the Kubernetes identifiers glossary. - 3
- The value associated with keys in the
data
map must be base64 encoded. - 4
- Entries in the
stringData
map are converted to base64 and the entry are then moved to thedata
map automatically. This field is write-only. The value is only be returned by thedata
field. - 5
- The value associated with keys in the
stringData
map is made up of plain text strings.
2.3.6.1.1. Properties of secrets
Key properties include:
- Secret data can be referenced independently from its definition.
- Secret data volumes are backed by temporary file-storage facilities (tmpfs) and never come to rest on a node.
- Secret data can be shared within a namespace.
2.3.6.1.2. Types of Secrets
The value in the type
field indicates the structure of the secret’s key names and values. The type can be used to enforce the presence of user names and keys in the secret object. If you do not want validation, use the opaque
type, which is the default.
Specify one of the following types to trigger minimal server-side validation to ensure the presence of specific key names in the secret data:
-
kubernetes.io/service-account-token
. Uses a service account token. -
kubernetes.io/dockercfg
. Uses the.dockercfg
file for required Docker credentials. -
kubernetes.io/dockerconfigjson
. Uses the.docker/config.json
file for required Docker credentials. -
kubernetes.io/basic-auth
. Use with basic authentication. -
kubernetes.io/ssh-auth
. Use with SSH key authentication. -
kubernetes.io/tls
. Use with TLS certificate authorities.
Specify type= Opaque
if you do not want validation, which means the secret does not claim to conform to any convention for key names or values. An opaque
secret, allows for unstructured key:value
pairs that can contain arbitrary values.
You can specify other arbitrary types, such as example.com/my-secret-type
. These types are not enforced server-side, but indicate that the creator of the secret intended to conform to the key/value requirements of that type.
2.3.6.1.3. Updates to secrets
When you modify the value of a secret, the value used by an already running pod does not dynamically change. To change a secret, you must delete the original pod and create a new pod, in some cases with an identical PodSpec
.
Updating a secret follows the same workflow as deploying a new container image. You can use the kubectl rolling-update
command.
The resourceVersion
value in a secret is not specified when it is referenced. Therefore, if a secret is updated at the same time as pods are starting, the version of the secret that is used for the pod is not defined.
Currently, it is not possible to check the resource version of a secret object that was used when a pod was created. It is planned that pods report this information, so that a controller could restart ones using an old resourceVersion
. In the interim, do not update the data of existing secrets, but create new ones with distinct names.
2.3.6.2. Creating secrets
You must create a secret before creating the pods that depend on that secret.
When creating secrets:
- Create a secret object with secret data.
- Update the pod service account to allow the reference to the secret.
-
Create a pod, which consumes the secret as an environment variable or as a file using a
secret
volume.
Procedure
Use the create command to create a secret object from a JSON or YAML file:
$ oc create -f <filename>
For example, you can create a secret from your local
.docker/config.json
file:$ oc create secret generic dockerhub \ --from-file=.dockerconfigjson=<path/to/.docker/config.json> \ --type=kubernetes.io/dockerconfigjson
This command generates a JSON specification of the secret named
dockerhub
and creates the object.YAML Opaque Secret Object Definition
apiVersion: v1 kind: Secret metadata: name: mysecret type: Opaque 1 data: username: dXNlci1uYW1l password: cGFzc3dvcmQ=
- 1
- Specifies an opaque secret.
Docker Configuration JSON File Secret Object Definition
apiVersion: v1 kind: Secret metadata: name: aregistrykey namespace: myapps type: kubernetes.io/dockerconfigjson 1 data: .dockerconfigjson:bm5ubm5ubm5ubm5ubm5ubm5ubm5ubmdnZ2dnZ2dnZ2dnZ2dnZ2dnZ2cgYXV0aCBrZXlzCg== 2
2.3.6.3. Using secrets
After creating secrets, you can create a pod to reference your secret, get logs, and delete the pod.
Procedure
Create the pod to reference your secret:
$ oc create -f <your_yaml_file>.yaml
Get the logs:
$ oc logs secret-example-pod
Delete the pod:
$ oc delete pod secret-example-pod
Additional resources
Example YAML files with secret data:
YAML Secret That Will Create Four Files
apiVersion: v1 kind: Secret metadata: name: test-secret data: username: dmFsdWUtMQ0K 1 password: dmFsdWUtMQ0KDQo= 2 stringData: hostname: myapp.mydomain.com 3 secret.properties: |- 4 property1=valueA property2=valueB
YAML of a pod populating files in a volume with secret data
apiVersion: v1 kind: Pod metadata: name: secret-example-pod spec: containers: - name: secret-test-container image: busybox command: [ "/bin/sh", "-c", "cat /etc/secret-volume/*" ] volumeMounts: # name must match the volume name below - name: secret-volume mountPath: /etc/secret-volume readOnly: true volumes: - name: secret-volume secret: secretName: test-secret restartPolicy: Never
YAML of a pod populating environment variables with secret data
apiVersion: v1 kind: Pod metadata: name: secret-example-pod spec: containers: - name: secret-test-container image: busybox command: [ "/bin/sh", "-c", "export" ] env: - name: TEST_SECRET_USERNAME_ENV_VAR valueFrom: secretKeyRef: name: test-secret key: username restartPolicy: Never
YAML of a Build Config Populating Environment Variables with Secret Data
apiVersion: build.openshift.io/v1 kind: BuildConfig metadata: name: secret-example-bc spec: strategy: sourceStrategy: env: - name: TEST_SECRET_USERNAME_ENV_VAR valueFrom: secretKeyRef: name: test-secret key: username
2.3.6.4. Adding input secrets and config maps
To provide credentials and other configuration data to a build without placing them in source control, you can define input secrets and input config maps.
In some scenarios, build operations require credentials or other configuration data to access dependent resources. To make that information available without placing it in source control, you can define input secrets and input config maps.
Procedure
To add an input secret, config maps, or both to an existing BuildConfig
object:
Create the
ConfigMap
object, if it does not exist:$ oc create configmap settings-mvn \ --from-file=settings.xml=<path/to/settings.xml>
This creates a new config map named
settings-mvn
, which contains the plain text content of thesettings.xml
file.TipYou can alternatively apply the following YAML to create the config map:
apiVersion: core/v1 kind: ConfigMap metadata: name: settings-mvn data: settings.xml: | <settings> … # Insert maven settings here </settings>
Create the
Secret
object, if it does not exist:$ oc create secret generic secret-mvn \ --from-file=ssh-privatekey=<path/to/.ssh/id_rsa> --type=kubernetes.io/ssh-auth
This creates a new secret named
secret-mvn
, which contains the base64 encoded content of theid_rsa
private key.TipYou can alternatively apply the following YAML to create the input secret:
apiVersion: core/v1 kind: Secret metadata: name: secret-mvn type: kubernetes.io/ssh-auth data: ssh-privatekey: | # Insert ssh private key, base64 encoded
Add the config map and secret to the
source
section in the existingBuildConfig
object:source: git: uri: https://github.com/wildfly/quickstart.git contextDir: helloworld configMaps: - configMap: name: settings-mvn secrets: - secret: name: secret-mvn
To include the secret and config map in a new BuildConfig
object, run the following command:
$ oc new-build \ openshift/wildfly-101-centos7~https://github.com/wildfly/quickstart.git \ --context-dir helloworld --build-secret “secret-mvn” \ --build-config-map "settings-mvn"
During the build, the settings.xml
and id_rsa
files are copied into the directory where the source code is located. In OpenShift Container Platform S2I builder images, this is the image working directory, which is set using the WORKDIR
instruction in the Dockerfile
. If you want to specify another directory, add a destinationDir
to the definition:
source: git: uri: https://github.com/wildfly/quickstart.git contextDir: helloworld configMaps: - configMap: name: settings-mvn destinationDir: ".m2" secrets: - secret: name: secret-mvn destinationDir: ".ssh"
You can also specify the destination directory when creating a new BuildConfig
object:
$ oc new-build \ openshift/wildfly-101-centos7~https://github.com/wildfly/quickstart.git \ --context-dir helloworld --build-secret “secret-mvn:.ssh” \ --build-config-map "settings-mvn:.m2"
In both cases, the settings.xml
file is added to the ./.m2
directory of the build environment, and the id_rsa
key is added to the ./.ssh
directory.
2.3.6.5. Source-to-image strategy
When using a Source
strategy, all defined input secrets are copied to their respective destinationDir
. If you left destinationDir
empty, then the secrets are placed in the working directory of the builder image.
The same rule is used when a destinationDir
is a relative path. The secrets are placed in the paths that are relative to the working directory of the image. The final directory in the destinationDir
path is created if it does not exist in the builder image. All preceding directories in the destinationDir
must exist, or an error will occur.
Input secrets are added as world-writable, have 0666
permissions, and are truncated to size zero after executing the assemble
script. This means that the secret files exist in the resulting image, but they are empty for security reasons.
Input config maps are not truncated after the assemble
script completes.
2.3.6.6. Docker strategy
When using a docker strategy, you can add all defined input secrets into your container image using the ADD
and COPY
instructions in your Dockerfile.
If you do not specify the destinationDir
for a secret, then the files are copied into the same directory in which the Dockerfile is located. If you specify a relative path as destinationDir
, then the secrets are copied into that directory, relative to your Dockerfile location. This makes the secret files available to the Docker build operation as part of the context directory used during the build.
Example of a Dockerfile referencing secret and config map data
FROM centos/ruby-22-centos7 USER root COPY ./secret-dir /secrets COPY ./config / # Create a shell script that will output secrets and ConfigMaps when the image is run RUN echo '#!/bin/sh' > /input_report.sh RUN echo '(test -f /secrets/secret1 && echo -n "secret1=" && cat /secrets/secret1)' >> /input_report.sh RUN echo '(test -f /config && echo -n "relative-configMap=" && cat /config)' >> /input_report.sh RUN chmod 755 /input_report.sh CMD ["/bin/sh", "-c", "/input_report.sh"]
Users normally remove their input secrets from the final application image so that the secrets are not present in the container running from that image. However, the secrets still exist in the image itself in the layer where they were added. This removal is part of the Dockerfile itself.
To prevent the contents of input secrets and config maps from appearing in the build output container images and avoid this removal process altogether, use build volumes in your Docker build strategy instead.
2.3.6.7. Custom strategy
When using a Custom strategy, all the defined input secrets and config maps are available in the builder container in the /var/run/secrets/openshift.io/build
directory. The custom build image must use these secrets and config maps appropriately. With the Custom strategy, you can define secrets as described in Custom strategy options.
There is no technical difference between existing strategy secrets and the input secrets. However, your builder image can distinguish between them and use them differently, based on your build use case.
The input secrets are always mounted into the /var/run/secrets/openshift.io/build
directory, or your builder can parse the $BUILD
environment variable, which includes the full build object.
If a pull secret for the registry exists in both the namespace and the node, builds default to using the pull secret in the namespace.
2.3.7. External artifacts
It is not recommended to store binary files in a source repository. Therefore, you must define a build which pulls additional files, such as Java .jar
dependencies, during the build process. How this is done depends on the build strategy you are using.
For a Source build strategy, you must put appropriate shell commands into the assemble
script:
.s2i/bin/assemble
File
#!/bin/sh APP_VERSION=1.0 wget http://repository.example.com/app/app-$APP_VERSION.jar -O app.jar
.s2i/bin/run
File
#!/bin/sh exec java -jar app.jar
For a Docker build strategy, you must modify the Dockerfile and invoke shell commands with the RUN
instruction:
Excerpt of Dockerfile
FROM jboss/base-jdk:8 ENV APP_VERSION 1.0 RUN wget http://repository.example.com/app/app-$APP_VERSION.jar -O app.jar EXPOSE 8080 CMD [ "java", "-jar", "app.jar" ]
In practice, you may want to use an environment variable for the file location so that the specific file to be downloaded can be customized using an environment variable defined on the BuildConfig
, rather than updating the Dockerfile or assemble
script.
You can choose between different methods of defining environment variables:
-
Using the
.s2i/environment
file] (only for a Source build strategy) -
Setting in
BuildConfig
-
Providing explicitly using
oc start-build --env
(only for builds that are triggered manually)
2.3.8. Using docker credentials for private registries
You can supply builds with a .docker/config.json
file with valid credentials for private container registries. This allows you to push the output image into a private container image registry or pull a builder image from the private container image registry that requires authentication.
You can supply credentials for multiple repositories within the same registry, each with credentials specific to that registry path.
For the OpenShift Container Platform container image registry, this is not required because secrets are generated automatically for you by OpenShift Container Platform.
The .docker/config.json
file is found in your home directory by default and has the following format:
auths: index.docker.io/v1/: 1 auth: "YWRfbGzhcGU6R2labnRib21ifTE=" 2 email: "user@example.com" 3 docker.io/my-namespace/my-user/my-image: 4 auth: "GzhYWRGU6R2fbclabnRgbkSp="" email: "user@example.com" docker.io/my-namespace: 5 auth: "GzhYWRGU6R2deesfrRgbkSp="" email: "user@example.com"
You can define multiple container image registries or define multiple repositories in the same registry. Alternatively, you can also add authentication entries to this file by running the docker login
command. The file will be created if it does not exist.
Kubernetes provides Secret
objects, which can be used to store configuration and passwords.
Prerequisites
-
You must have a
.docker/config.json
file.
Procedure
Create the secret from your local
.docker/config.json
file:$ oc create secret generic dockerhub \ --from-file=.dockerconfigjson=<path/to/.docker/config.json> \ --type=kubernetes.io/dockerconfigjson
This generates a JSON specification of the secret named
dockerhub
and creates the object.Add a
pushSecret
field into theoutput
section of theBuildConfig
and set it to the name of thesecret
that you created, which in the previous example isdockerhub
:spec: output: to: kind: "DockerImage" name: "private.registry.com/org/private-image:latest" pushSecret: name: "dockerhub"
You can use the
oc set build-secret
command to set the push secret on the build configuration:$ oc set build-secret --push bc/sample-build dockerhub
You can also link the push secret to the service account used by the build instead of specifying the
pushSecret
field. By default, builds use thebuilder
service account. The push secret is automatically added to the build if the secret contains a credential that matches the repository hosting the build’s output image.$ oc secrets link builder dockerhub
Pull the builder container image from a private container image registry by specifying the
pullSecret
field, which is part of the build strategy definition:strategy: sourceStrategy: from: kind: "DockerImage" name: "docker.io/user/private_repository" pullSecret: name: "dockerhub"
You can use the
oc set build-secret
command to set the pull secret on the build configuration:$ oc set build-secret --pull bc/sample-build dockerhub
NoteThis example uses
pullSecret
in a Source build, but it is also applicable in Docker and Custom builds.You can also link the pull secret to the service account used by the build instead of specifying the
pullSecret
field. By default, builds use thebuilder
service account. The pull secret is automatically added to the build if the secret contains a credential that matches the repository hosting the build’s input image. To link the pull secret to the service account used by the build instead of specifying thepullSecret
field, run:$ oc secrets link builder dockerhub
NoteYou must specify a
from
image in theBuildConfig
spec to take advantage of this feature. Docker strategy builds generated byoc new-build
oroc new-app
may not do this in some situations.
2.3.9. Build environments
As with pod environment variables, build environment variables can be defined in terms of references to other resources or variables using the Downward API. There are some exceptions, which are noted.
You can also manage environment variables defined in the BuildConfig
with the oc set env
command.
Referencing container resources using valueFrom
in build environment variables is not supported as the references are resolved before the container is created.
2.3.9.1. Using build fields as environment variables
You can inject information about the build object by setting the fieldPath
environment variable source to the JsonPath
of the field from which you are interested in obtaining the value.
Jenkins Pipeline strategy does not support valueFrom
syntax for environment variables.
Procedure
Set the
fieldPath
environment variable source to theJsonPath
of the field from which you are interested in obtaining the value:env: - name: FIELDREF_ENV valueFrom: fieldRef: fieldPath: metadata.name
2.3.9.2. Using secrets as environment variables
You can make key values from secrets available as environment variables using the valueFrom
syntax.
This method shows the secrets as plain text in the output of the build pod console. To avoid this, use input secrets and config maps instead.
Procedure
To use a secret as an environment variable, set the
valueFrom
syntax:apiVersion: build.openshift.io/v1 kind: BuildConfig metadata: name: secret-example-bc spec: strategy: sourceStrategy: env: - name: MYVAL valueFrom: secretKeyRef: key: myval name: mysecret
Additional resources
2.3.10. Service serving certificate secrets
Service serving certificate secrets are intended to support complex middleware applications that need out-of-the-box certificates. It has the same settings as the server certificates generated by the administrator tooling for nodes and masters.
Procedure
To secure communication to your service, have the cluster generate a signed serving certificate/key pair into a secret in your namespace.
Set the
service.beta.openshift.io/serving-cert-secret-name
annotation on your service with the value set to the name you want to use for your secret.Then, your
PodSpec
can mount that secret. When it is available, your pod runs. The certificate is good for the internal service DNS name,<service.name>.<service.namespace>.svc
.The certificate and key are in PEM format, stored in
tls.crt
andtls.key
respectively. The certificate/key pair is automatically replaced when it gets close to expiration. View the expiration date in theservice.beta.openshift.io/expiry
annotation on the secret, which is in RFC3339 format.
In most cases, the service DNS name <service.name>.<service.namespace>.svc
is not externally routable. The primary use of <service.name>.<service.namespace>.svc
is for intracluster or intraservice communication, and with re-encrypt routes.
Other pods can trust cluster-created certificates, which are only signed for internal DNS names, by using the certificate authority (CA) bundle in the /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt
file that is automatically mounted in their pod.
The signature algorithm for this feature is x509.SHA256WithRSA
. To manually rotate, delete the generated secret. A new certificate is created.
2.3.11. Secrets restrictions
To use a secret, a pod needs to reference the secret. A secret can be used with a pod in three ways:
- To populate environment variables for containers.
- As files in a volume mounted on one or more of its containers.
- By kubelet when pulling images for the pod.
Volume type secrets write data into the container as a file using the volume mechanism. imagePullSecrets
use service accounts for the automatic injection of the secret into all pods in a namespaces.
When a template contains a secret definition, the only way for the template to use the provided secret is to ensure that the secret volume sources are validated and that the specified object reference actually points to an object of type Secret
. Therefore, a secret needs to be created before any pods that depend on it. The most effective way to ensure this is to have it get injected automatically through the use of a service account.
Secret API objects reside in a namespace. They can only be referenced by pods in that same namespace.
Individual secrets are limited to 1MB in size. This is to discourage the creation of large secrets that would exhaust apiserver and kubelet memory. However, creation of a number of smaller secrets could also exhaust memory.
2.4. Managing build output
Use the following sections for an overview of and instructions for managing build output.
2.4.1. Build output
Builds that use the docker or source-to-image (S2I) strategy result in the creation of a new container image. The image is then pushed to the container image registry specified in the output
section of the Build
specification.
If the output kind is ImageStreamTag
, then the image will be pushed to the integrated OpenShift Container Platform registry and tagged in the specified imagestream. If the output is of type DockerImage
, then the name of the output reference will be used as a docker push specification. The specification may contain a registry or will default to DockerHub if no registry is specified. If the output section of the build specification is empty, then the image will not be pushed at the end of the build.
Output to an ImageStreamTag
spec: output: to: kind: "ImageStreamTag" name: "sample-image:latest"
Output to a docker Push Specification
spec: output: to: kind: "DockerImage" name: "my-registry.mycompany.com:5000/myimages/myimage:tag"
2.4.2. Output image environment variables
docker and source-to-image (S2I) strategy builds set the following environment variables on output images:
Variable | Description |
---|---|
| Name of the build |
| Namespace of the build |
| The source URL of the build |
| The Git reference used in the build |
| Source commit used in the build |
Additionally, any user-defined environment variable, for example those configured with S2I] or docker strategy options, will also be part of the output image environment variable list.
2.4.3. Output image labels
docker and source-to-image (S2I)` builds set the following labels on output images:
Label | Description |
---|---|
| Author of the source commit used in the build |
| Date of the source commit used in the build |
| Hash of the source commit used in the build |
| Message of the source commit used in the build |
| Branch or reference specified in the source |
| Source URL for the build |
You can also use the BuildConfig.spec.output.imageLabels
field to specify a list of custom labels that will be applied to each image built from the build configuration.
Custom Labels to be Applied to Built Images
spec: output: to: kind: "ImageStreamTag" name: "my-image:latest" imageLabels: - name: "vendor" value: "MyCompany" - name: "authoritative-source-url" value: "registry.mycompany.com"
2.5. Using build strategies
The following sections define the primary supported build strategies, and how to use them.
2.5.1. Docker build
OpenShift Container Platform uses Buildah to build a container image from a Dockerfile. For more information on building container images with Dockerfiles, see the Dockerfile reference documentation.
If you set Docker build arguments by using the buildArgs
array, see Understand how ARG and FROM interact in the Dockerfile reference documentation.
2.5.1.1. Replacing Dockerfile FROM image
You can replace the FROM
instruction of the Dockerfile with the from
of the BuildConfig
object. If the Dockerfile uses multi-stage builds, the image in the last FROM
instruction will be replaced.
Procedure
To replace the FROM
instruction of the Dockerfile with the from
of the BuildConfig
.
strategy: dockerStrategy: from: kind: "ImageStreamTag" name: "debian:latest"
2.5.1.2. Using Dockerfile path
By default, docker builds use a Dockerfile located at the root of the context specified in the BuildConfig.spec.source.contextDir
field.
The dockerfilePath
field allows the build to use a different path to locate your Dockerfile, relative to the BuildConfig.spec.source.contextDir
field. It can be a different file name than the default Dockerfile, such as MyDockerfile
, or a path to a Dockerfile in a subdirectory, such as dockerfiles/app1/Dockerfile
.
Procedure
To use the dockerfilePath
field for the build to use a different path to locate your Dockerfile, set:
strategy: dockerStrategy: dockerfilePath: dockerfiles/app1/Dockerfile
2.5.1.3. Using docker environment variables
To make environment variables available to the docker build process and resulting image, you can add environment variables to the dockerStrategy
definition of the build configuration.
The environment variables defined there are inserted as a single ENV
Dockerfile instruction right after the FROM
instruction, so that it can be referenced later on within the Dockerfile.
Procedure
The variables are defined during build and stay in the output image, therefore they will be present in any container that runs that image as well.
For example, defining a custom HTTP proxy to be used during build and runtime:
dockerStrategy: ... env: - name: "HTTP_PROXY" value: "http://myproxy.net:5187/"
You can also manage environment variables defined in the build configuration with the oc set env
command.
2.5.1.4. Adding docker build arguments
You can set docker build arguments using the buildArgs
array. The build arguments are passed to docker when a build is started.
See Understand how ARG and FROM interact in the Dockerfile reference documentation.
Procedure
To set docker build arguments, add entries to the buildArgs
array, which is located in the dockerStrategy
definition of the BuildConfig
object. For example:
dockerStrategy: ... buildArgs: - name: "foo" value: "bar"
Only the name
and value
fields are supported. Any settings on the valueFrom
field are ignored.
2.5.1.5. Squashing layers with docker builds
Docker builds normally create a layer representing each instruction in a Dockerfile. Setting the imageOptimizationPolicy
to SkipLayers
merges all instructions into a single layer on top of the base image.
Procedure
Set the
imageOptimizationPolicy
toSkipLayers
:strategy: dockerStrategy: imageOptimizationPolicy: SkipLayers
2.5.1.6. Using build volumes
You can mount build volumes to give running builds access to information that you don’t want to persist in the output container image.
Build volumes provide sensitive information, such as repository credentials, that the build environment or configuration only needs at build time. Build volumes are different from build inputs, whose data can persist in the output container image.
The mount points of build volumes, from which the running build reads data, are functionally similar to pod volume mounts.
Prerequisites
Procedure
In the
dockerStrategy
definition of theBuildConfig
object, add any build volumes to thevolumes
array. For example:spec: dockerStrategy: volumes: - name: secret-mvn 1 mounts: - destinationPath: /opt/app-root/src/.ssh 2 source: type: Secret 3 secret: secretName: my-secret 4 - name: settings-mvn 5 mounts: - destinationPath: /opt/app-root/src/.m2 6 source: type: ConfigMap 7 configMap: name: my-config 8
- 1 5
- Required. A unique name.
- 2 6
- Required. The absolute path of the mount point. It must not contain
..
or:
and doesn’t collide with the destination path generated by the builder. The/opt/app-root/src
is the default home directory for many Red Hat S2I-enabled images. - 3 7
- Required. The type of source,
ConfigMap
orSecret
. - 4 8
- Required. The name of the source.
2.5.2. Source-to-image build
Source-to-image (S2I) is a tool for building reproducible container images. It produces ready-to-run images by injecting application source into a container image and assembling a new image. The new image incorporates the base image, the builder, and built source and is ready to use with the buildah run
command. S2I supports incremental builds, which re-use previously downloaded dependencies, previously built artifacts, and so on.
2.5.2.1. Performing source-to-image incremental builds
Source-to-image (S2I) can perform incremental builds, which means it reuses artifacts from previously-built images.
Procedure
To create an incremental build, create a with the following modification to the strategy definition:
strategy: sourceStrategy: from: kind: "ImageStreamTag" name: "incremental-image:latest" 1 incremental: true 2
- 1
- Specify an image that supports incremental builds. Consult the documentation of the builder image to determine if it supports this behavior.
- 2
- This flag controls whether an incremental build is attempted. If the builder image does not support incremental builds, the build will still succeed, but you will get a log message stating the incremental build was not successful because of a missing
save-artifacts
script.
Additional resources
- See S2I Requirements for information on how to create a builder image supporting incremental builds.
2.5.2.2. Overriding source-to-image builder image scripts
You can override the assemble
, run
, and save-artifacts
source-to-image (S2I) scripts provided by the builder image.
Procedure
To override the assemble
, run
, and save-artifacts
S2I scripts provided by the builder image, either:
-
Provide an
assemble
,run
, orsave-artifacts
script in the.s2i/bin
directory of your application source repository. Provide a URL of a directory containing the scripts as part of the strategy definition. For example:
strategy: sourceStrategy: from: kind: "ImageStreamTag" name: "builder-image:latest" scripts: "http://somehost.com/scripts_directory" 1
- 1
- This path will have
run
,assemble
, andsave-artifacts
appended to it. If any or all scripts are found they will be used in place of the same named scripts provided in the image.
Files located at the scripts
URL take precedence over files located in .s2i/bin
of the source repository.
2.5.2.3. Source-to-image environment variables
There are two ways to make environment variables available to the source build process and resulting image. Environment files and BuildConfig environment values. Variables provided will be present during the build process and in the output image.
2.5.2.3.1. Using source-to-image environment files
Source build enables you to set environment values, one per line, inside your application, by specifying them in a .s2i/environment
file in the source repository. The environment variables specified in this file are present during the build process and in the output image.
If you provide a .s2i/environment
file in your source repository, source-to-image (S2I) reads this file during the build. This allows customization of the build behavior as the assemble
script may use these variables.
Procedure
For example, to disable assets compilation for your Rails application during the build:
-
Add
DISABLE_ASSET_COMPILATION=true
in the.s2i/environment
file.
In addition to builds, the specified environment variables are also available in the running application itself. For example, to cause the Rails application to start in development
mode instead of production
:
-
Add
RAILS_ENV=development
to the.s2i/environment
file.
The complete list of supported environment variables is available in the using images section for each image.
2.5.2.3.2. Using source-to-image build configuration environment
You can add environment variables to the sourceStrategy
definition of the build configuration. The environment variables defined there are visible during the assemble
script execution and will be defined in the output image, making them also available to the run
script and application code.
Procedure
For example, to disable assets compilation for your Rails application:
sourceStrategy: ... env: - name: "DISABLE_ASSET_COMPILATION" value: "true"
Additional resources
- The build environment section provides more advanced instructions.
-
You can also manage environment variables defined in the build configuration with the
oc set env
command.
2.5.2.4. Ignoring source-to-image source files
Source-to-image (S2I) supports a .s2iignore
file, which contains a list of file patterns that should be ignored. Files in the build working directory, as provided by the various input sources, that match a pattern found in the .s2iignore
file will not be made available to the assemble
script.
2.5.2.5. Creating images from source code with source-to-image
Source-to-image (S2I) is a framework that makes it easy to write images that take application source code as an input and produce a new image that runs the assembled application as output.
The main advantage of using S2I for building reproducible container images is the ease of use for developers. As a builder image author, you must understand two basic concepts in order for your images to provide the best S2I performance, the build process and S2I scripts.
2.5.2.5.1. Understanding the source-to-image build process
The build process consists of the following three fundamental elements, which are combined into a final container image:
- Sources
- Source-to-image (S2I) scripts
- Builder image
S2I generates a Dockerfile with the builder image as the first FROM
instruction. The Dockerfile generated by S2I is then passed to Buildah.
2.5.2.5.2. How to write source-to-image scripts
You can write source-to-image (S2I) scripts in any programming language, as long as the scripts are executable inside the builder image. S2I supports multiple options providing assemble
/run
/save-artifacts
scripts. All of these locations are checked on each build in the following order:
- A script specified in the build configuration.
-
A script found in the application source
.s2i/bin
directory. -
A script found at the default image URL with the
io.openshift.s2i.scripts-url
label.
Both the io.openshift.s2i.scripts-url
label specified in the image and the script specified in a build configuration can take one of the following forms:
-
image:///path_to_scripts_dir
: absolute path inside the image to a directory where the S2I scripts are located. -
file:///path_to_scripts_dir
: relative or absolute path to a directory on the host where the S2I scripts are located. -
http(s)://path_to_scripts_dir
: URL to a directory where the S2I scripts are located.
Script | Description |
---|---|
|
The
|
|
The |
|
The
These dependencies are gathered into a |
|
The |
|
The
Note
The suggested location to put the test application built by your |
Example S2I scripts
The following example S2I scripts are written in Bash. Each example assumes its tar
contents are unpacked into the /tmp/s2i
directory.
assemble
script:
#!/bin/bash # restore build artifacts if [ "$(ls /tmp/s2i/artifacts/ 2>/dev/null)" ]; then mv /tmp/s2i/artifacts/* $HOME/. fi # move the application source mv /tmp/s2i/src $HOME/src # build application artifacts pushd ${HOME} make all # install the artifacts make install popd
run
script:
#!/bin/bash # run the application /opt/application/run.sh
save-artifacts
script:
#!/bin/bash pushd ${HOME} if [ -d deps ]; then # all deps contents to tar stream tar cf - deps fi popd
usage
script:
#!/bin/bash # inform the user how to use the image cat <<EOF This is a S2I sample builder image, to use it, install https://github.com/openshift/source-to-image EOF
Additional resources
2.5.2.6. Using build volumes
You can mount build volumes to give running builds access to information that you don’t want to persist in the output container image.
Build volumes provide sensitive information, such as repository credentials, that the build environment or configuration only needs at build time. Build volumes are different from build inputs, whose data can persist in the output container image.
The mount points of build volumes, from which the running build reads data, are functionally similar to pod volume mounts.
Prerequisites
Procedure
In the
sourceStrategy
definition of theBuildConfig
object, add any build volumes to thevolumes
array. For example:spec: sourceStrategy: volumes: - name: secret-mvn 1 mounts: - destinationPath: /opt/app-root/src/.ssh 2 source: type: Secret 3 secret: secretName: my-secret 4 - name: settings-mvn 5 mounts: - destinationPath: /opt/app-root/src/.m2 6 source: type: ConfigMap 7 configMap: name: my-config 8
- 1 5
- Required. A unique name.
- 2 6
- Required. The absolute path of the mount point. It must not contain
..
or:
and doesn’t collide with the destination path generated by the builder. The/opt/app-root/src
is the default home directory for many Red Hat S2I-enabled images. - 3 7
- Required. The type of source,
ConfigMap
orSecret
. - 4 8
- Required. The name of the source.
2.5.3. Custom build
The custom build strategy allows developers to define a specific builder image responsible for the entire build process. Using your own builder image allows you to customize your build process.
A custom builder image is a plain container image embedded with build process logic, for example for building RPMs or base images.
Custom builds run with a high level of privilege and are not available to users by default. Only users who can be trusted with cluster administration permissions should be granted access to run custom builds.
2.5.3.1. Using FROM image for custom builds
You can use the customStrategy.from
section to indicate the image to use for the custom build
Procedure
Set the
customStrategy.from
section:strategy: customStrategy: from: kind: "DockerImage" name: "openshift/sti-image-builder"
2.5.3.2. Using secrets in custom builds
In addition to secrets for source and images that can be added to all build types, custom strategies allow adding an arbitrary list of secrets to the builder pod.
Procedure
To mount each secret at a specific location, edit the
secretSource
andmountPath
fields of thestrategy
YAML file:strategy: customStrategy: secrets: - secretSource: 1 name: "secret1" mountPath: "/tmp/secret1" 2 - secretSource: name: "secret2" mountPath: "/tmp/secret2"
2.5.3.3. Using environment variables for custom builds
To make environment variables available to the custom build process, you can add environment variables to the customStrategy
definition of the build configuration.
The environment variables defined there are passed to the pod that runs the custom build.
Procedure
Define a custom HTTP proxy to be used during build:
customStrategy: ... env: - name: "HTTP_PROXY" value: "http://myproxy.net:5187/"
To manage environment variables defined in the build configuration, enter the following command:
$ oc set env <enter_variables>
2.5.3.4. Using custom builder images
OpenShift Container Platform’s custom build strategy enables you to define a specific builder image responsible for the entire build process. When you need a build to produce individual artifacts such as packages, JARs, WARs, installable ZIPs, or base images, use a custom builder image using the custom build strategy.
A custom builder image is a plain container image embedded with build process logic, which is used for building artifacts such as RPMs or base container images.
Additionally, the custom builder allows implementing any extended build process, such as a CI/CD flow that runs unit or integration tests.
2.5.3.4.1. Custom builder image
Upon invocation, a custom builder image receives the following environment variables with the information needed to proceed with the build:
Variable Name | Description |
---|---|
|
The entire serialized JSON of the |
| The URL of a Git repository with source to be built. |
|
Uses the same value as |
| Specifies the subdirectory of the Git repository to be used when building. Only present if defined. |
| The Git reference to be built. |
| The version of the OpenShift Container Platform master that created this build object. |
| The container image registry to push the image to. |
| The container image tag name for the image being built. |
|
The path to the container registry credentials for running a |
2.5.3.4.2. Custom builder workflow
Although custom builder image authors have flexibility in defining the build process, your builder image must adhere to the following required steps necessary for running a build inside of OpenShift Container Platform:
-
The
Build
object definition contains all the necessary information about input parameters for the build. - Run the build process.
- If your build produces an image, push it to the output location of the build if it is defined. Other output locations can be passed with environment variables.
2.5.4. Pipeline build
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
The Pipeline build strategy allows developers to define a Jenkins pipeline for use by the Jenkins pipeline plugin. The build can be started, monitored, and managed by OpenShift Container Platform in the same way as any other build type.
Pipeline workflows are defined in a jenkinsfile
, either embedded directly in the build configuration, or supplied in a Git repository and referenced by the build configuration.
2.5.4.1. Understanding OpenShift Container Platform pipelines
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
Pipelines give you control over building, deploying, and promoting your applications on OpenShift Container Platform. Using a combination of the Jenkins Pipeline build strategy, jenkinsfiles
, and the OpenShift Container Platform Domain Specific Language (DSL) provided by the Jenkins Client Plugin, you can create advanced build, test, deploy, and promote pipelines for any scenario.
OpenShift Container Platform Jenkins Sync Plugin
The OpenShift Container Platform Jenkins Sync Plugin keeps the build configuration and build objects in sync with Jenkins jobs and builds, and provides the following:
- Dynamic job and run creation in Jenkins.
- Dynamic creation of agent pod templates from image streams, image stream tags, or config maps.
- Injection of environment variables.
- Pipeline visualization in the OpenShift Container Platform web console.
- Integration with the Jenkins Git plugin, which passes commit information from OpenShift Container Platform builds to the Jenkins Git plugin.
- Synchronization of secrets into Jenkins credential entries.
OpenShift Container Platform Jenkins Client Plugin
The OpenShift Container Platform Jenkins Client Plugin is a Jenkins plugin which aims to provide a readable, concise, comprehensive, and fluent Jenkins Pipeline syntax for rich interactions with an OpenShift Container Platform API Server. The plugin uses the OpenShift Container Platform command line tool, oc
, which must be available on the nodes executing the script.
The Jenkins Client Plugin must be installed on your Jenkins master so the OpenShift Container Platform DSL will be available to use within the jenkinsfile
for your application. This plugin is installed and enabled by default when using the OpenShift Container Platform Jenkins image.
For OpenShift Container Platform Pipelines within your project, you will must use the Jenkins Pipeline Build Strategy. This strategy defaults to using a jenkinsfile
at the root of your source repository, but also provides the following configuration options:
-
An inline
jenkinsfile
field within your build configuration. -
A
jenkinsfilePath
field within your build configuration that references the location of thejenkinsfile
to use relative to the sourcecontextDir
.
The optional jenkinsfilePath
field specifies the name of the file to use, relative to the source contextDir
. If contextDir
is omitted, it defaults to the root of the repository. If jenkinsfilePath
is omitted, it defaults to jenkinsfile
.
2.5.4.2. Providing the Jenkins file for pipeline builds
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
The jenkinsfile
uses the standard groovy language syntax to allow fine grained control over the configuration, build, and deployment of your application.
You can supply the jenkinsfile
in one of the following ways:
- A file located within your source code repository.
-
Embedded as part of your build configuration using the
jenkinsfile
field.
When using the first option, the jenkinsfile
must be included in your applications source code repository at one of the following locations:
-
A file named
jenkinsfile
at the root of your repository. -
A file named
jenkinsfile
at the root of the sourcecontextDir
of your repository. -
A file name specified via the
jenkinsfilePath
field of theJenkinsPipelineStrategy
section of your BuildConfig, which is relative to the sourcecontextDir
if supplied, otherwise it defaults to the root of the repository.
The jenkinsfile
is run on the Jenkins agent pod, which must have the OpenShift Container Platform client binaries available if you intend to use the OpenShift Container Platform DSL.
Procedure
To provide the Jenkins file, you can either:
- Embed the Jenkins file in the build configuration.
- Include in the build configuration a reference to the Git repository that contains the Jenkins file.
Embedded Definition
kind: "BuildConfig" apiVersion: "v1" metadata: name: "sample-pipeline" spec: strategy: jenkinsPipelineStrategy: jenkinsfile: |- node('agent') { stage 'build' openshiftBuild(buildConfig: 'ruby-sample-build', showBuildLogs: 'true') stage 'deploy' openshiftDeploy(deploymentConfig: 'frontend') }
Reference to Git Repository
kind: "BuildConfig"
apiVersion: "v1"
metadata:
name: "sample-pipeline"
spec:
source:
git:
uri: "https://github.com/openshift/ruby-hello-world"
strategy:
jenkinsPipelineStrategy:
jenkinsfilePath: some/repo/dir/filename 1
- 1
- The optional
jenkinsfilePath
field specifies the name of the file to use, relative to the sourcecontextDir
. IfcontextDir
is omitted, it defaults to the root of the repository. IfjenkinsfilePath
is omitted, it defaults tojenkinsfile
.
2.5.4.3. Using environment variables for pipeline builds
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
To make environment variables available to the Pipeline build process, you can add environment variables to the jenkinsPipelineStrategy
definition of the build configuration.
Once defined, the environment variables will be set as parameters for any Jenkins job associated with the build configuration.
Procedure
To define environment variables to be used during build, edit the YAML file:
jenkinsPipelineStrategy: ... env: - name: "FOO" value: "BAR"
You can also manage environment variables defined in the build configuration with the oc set env
command.
2.5.4.3.1. Mapping between BuildConfig environment variables and Jenkins job parameters
When a Jenkins job is created or updated based on changes to a Pipeline strategy build configuration, any environment variables in the build configuration are mapped to Jenkins job parameters definitions, where the default values for the Jenkins job parameters definitions are the current values of the associated environment variables.
After the Jenkins job’s initial creation, you can still add additional parameters to the job from the Jenkins console. The parameter names differ from the names of the environment variables in the build configuration. The parameters are honored when builds are started for those Jenkins jobs.
How you start builds for the Jenkins job dictates how the parameters are set.
-
If you start with
oc start-build
, the values of the environment variables in the build configuration are the parameters set for the corresponding job instance. Any changes you make to the parameters' default values from the Jenkins console are ignored. The build configuration values take precedence. If you start with
oc start-build -e
, the values for the environment variables specified in the-e
option take precedence.- If you specify an environment variable not listed in the build configuration, they will be added as a Jenkins job parameter definitions.
-
Any changes you make from the Jenkins console to the parameters corresponding to the environment variables are ignored. The build configuration and what you specify with
oc start-build -e
takes precedence.
- If you start the Jenkins job with the Jenkins console, then you can control the setting of the parameters with the Jenkins console as part of starting a build for the job.
It is recommended that you specify in the build configuration all possible environment variables to be associated with job parameters. Doing so reduces disk I/O and improves performance during Jenkins processing.
2.5.4.4. Pipeline build tutorial
The Pipeline build strategy is deprecated in OpenShift Container Platform 4. Equivalent and improved functionality is present in the OpenShift Container Platform Pipelines based on Tekton.
Jenkins images on OpenShift Container Platform are fully supported and users should follow Jenkins user documentation for defining their jenkinsfile
in a job or store it in a Source Control Management system.
This example demonstrates how to create an OpenShift Container Platform Pipeline that will build, deploy, and verify a Node.js/MongoDB
application using the nodejs-mongodb.json
template.
Procedure
Create the Jenkins master:
$ oc project <project_name>
Select the project that you want to use or create a new project with
oc new-project <project_name>
.$ oc new-app jenkins-ephemeral 1
If you want to use persistent storage, use
jenkins-persistent
instead.Create a file named
nodejs-sample-pipeline.yaml
with the following content:NoteThis creates a
BuildConfig
object that employs the Jenkins pipeline strategy to build, deploy, and scale theNode.js/MongoDB
example application.kind: "BuildConfig" apiVersion: "v1" metadata: name: "nodejs-sample-pipeline" spec: strategy: jenkinsPipelineStrategy: jenkinsfile: <pipeline content from below> type: JenkinsPipeline
After you create a
BuildConfig
object with ajenkinsPipelineStrategy
, tell the pipeline what to do by using an inlinejenkinsfile
:NoteThis example does not set up a Git repository for the application.
The following
jenkinsfile
content is written in Groovy using the OpenShift Container Platform DSL. For this example, include inline content in theBuildConfig
object using the YAML Literal Style, though including ajenkinsfile
in your source repository is the preferred method.def templatePath = 'https://raw.githubusercontent.com/openshift/nodejs-ex/master/openshift/templates/nodejs-mongodb.json' 1 def templateName = 'nodejs-mongodb-example' 2 pipeline { agent { node { label 'nodejs' 3 } } options { timeout(time: 20, unit: 'MINUTES') 4 } stages { stage('preamble') { steps { script { openshift.withCluster() { openshift.withProject() { echo "Using project: ${openshift.project()}" } } } } } stage('cleanup') { steps { script { openshift.withCluster() { openshift.withProject() { openshift.selector("all", [ template : templateName ]).delete() 5 if (openshift.selector("secrets", templateName).exists()) { 6 openshift.selector("secrets", templateName).delete() } } } } } } stage('create') { steps { script { openshift.withCluster() { openshift.withProject() { openshift.newApp(templatePath) 7 } } } } } stage('build') { steps { script { openshift.withCluster() { openshift.withProject() { def builds = openshift.selector("bc", templateName).related('builds') timeout(5) { 8 builds.untilEach(1) { return (it.object().status.phase == "Complete") } } } } } } } stage('deploy') { steps { script { openshift.withCluster() { openshift.withProject() { def rm = openshift.selector("dc", templateName).rollout() timeout(5) { 9 openshift.selector("dc", templateName).related('pods').untilEach(1) { return (it.object().status.phase == "Running") } } } } } } } stage('tag') { steps { script { openshift.withCluster() { openshift.withProject() { openshift.tag("${templateName}:latest", "${templateName}-staging:latest") 10 } } } } } } }
- 1
- Path of the template to use.
- 1 2
- Name of the template that will be created.
- 3
- Spin up a
node.js
agent pod on which to run this build. - 4
- Set a timeout of 20 minutes for this pipeline.
- 5
- Delete everything with this template label.
- 6
- Delete any secrets with this template label.
- 7
- Create a new application from the
templatePath
. - 8
- Wait up to five minutes for the build to complete.
- 9
- Wait up to five minutes for the deployment to complete.
- 10
- If everything else succeeded, tag the
$ {templateName}:latest
image as$ {templateName}-staging:latest
. A pipeline build configuration for the staging environment can watch for the$ {templateName}-staging:latest
image to change and then deploy it to the staging environment.
NoteThe previous example was written using the declarative pipeline style, but the older scripted pipeline style is also supported.
Create the Pipeline
BuildConfig
in your OpenShift Container Platform cluster:$ oc create -f nodejs-sample-pipeline.yaml
If you do not want to create your own file, you can use the sample from the Origin repository by running:
$ oc create -f https://raw.githubusercontent.com/openshift/origin/master/examples/jenkins/pipeline/nodejs-sample-pipeline.yaml
Start the Pipeline:
$ oc start-build nodejs-sample-pipeline
NoteAlternatively, you can start your pipeline with the OpenShift Container Platform web console by navigating to the Builds
Pipeline section and clicking Start Pipeline, or by visiting the Jenkins Console, navigating to the Pipeline that you created, and clicking Build Now. Once the pipeline is started, you should see the following actions performed within your project:
- A job instance is created on the Jenkins server.
- An agent pod is launched, if your pipeline requires one.
The pipeline runs on the agent pod, or the master if no agent is required.
-
Any previously created resources with the
template=nodejs-mongodb-example
label will be deleted. -
A new application, and all of its associated resources, will be created from the
nodejs-mongodb-example
template. A build will be started using the
nodejs-mongodb-example
BuildConfig
.- The pipeline will wait until the build has completed to trigger the next stage.
A deployment will be started using the
nodejs-mongodb-example
deployment configuration.- The pipeline will wait until the deployment has completed to trigger the next stage.
-
If the build and deploy are successful, the
nodejs-mongodb-example:latest
image will be tagged asnodejs-mongodb-example:stage
.
-
Any previously created resources with the
The agent pod is deleted, if one was required for the pipeline.
NoteThe best way to visualize the pipeline execution is by viewing it in the OpenShift Container Platform web console. You can view your pipelines by logging in to the web console and navigating to Builds
Pipelines.
2.5.5. Adding secrets with web console
You can add a secret to your build configuration so that it can access a private repository.
Procedure
To add a secret to your build configuration so that it can access a private repository from the OpenShift Container Platform web console:
- Create a new OpenShift Container Platform project.
- Create a secret that contains credentials for accessing a private source code repository.
- Create a build configuration.
-
On the build configuration editor page or in the
create app from builder image
page of the web console, set the Source Secret. - Click Save.
2.5.6. Enabling pulling and pushing
You can enable pulling to a private registry by setting the pull secret and pushing by setting the push secret in the build configuration.
Procedure
To enable pulling to a private registry:
- Set the pull secret in the build configuration.
To enable pushing:
- Set the push secret in the build configuration.
2.6. Custom image builds with Buildah
With OpenShift Container Platform 4.9, a docker socket will not be present on the host nodes. This means the mount docker socket option of a custom build is not guaranteed to provide an accessible docker socket for use within a custom build image.
If you require this capability in order to build and push images, add the Buildah tool your custom build image and use it to build and push the image within your custom build logic. The following is an example of how to run custom builds with Buildah.
Using the custom build strategy requires permissions that normal users do not have by default because it allows the user to execute arbitrary code inside a privileged container running on the cluster. This level of access can be used to compromise the cluster and therefore should be granted only to users who are trusted with administrative privileges on the cluster.
2.6.1. Prerequisites
- Review how to grant custom build permissions.
2.6.2. Creating custom build artifacts
You must create the image you want to use as your custom build image.
Procedure
Starting with an empty directory, create a file named
Dockerfile
with the following content:FROM registry.redhat.io/rhel8/buildah # In this example, `/tmp/build` contains the inputs that build when this # custom builder image is run. Normally the custom builder image fetches # this content from some location at build time, by using git clone as an example. ADD dockerfile.sample /tmp/input/Dockerfile ADD build.sh /usr/bin RUN chmod a+x /usr/bin/build.sh # /usr/bin/build.sh contains the actual custom build logic that will be run when # this custom builder image is run. ENTRYPOINT ["/usr/bin/build.sh"]
In the same directory, create a file named
dockerfile.sample
. This file is included in the custom build image and defines the image that is produced by the custom build:FROM registry.access.redhat.com/ubi8/ubi RUN touch /tmp/build
In the same directory, create a file named
build.sh
. This file contains the logic that is run when the custom build runs:#!/bin/sh # Note that in this case the build inputs are part of the custom builder image, but normally this # is retrieved from an external source. cd /tmp/input # OUTPUT_REGISTRY and OUTPUT_IMAGE are env variables provided by the custom # build framework TAG="${OUTPUT_REGISTRY}/${OUTPUT_IMAGE}" # performs the build of the new image defined by dockerfile.sample buildah --storage-driver vfs bud --isolation chroot -t ${TAG} . # buildah requires a slight modification to the push secret provided by the service # account to use it for pushing the image cp /var/run/secrets/openshift.io/push/.dockercfg /tmp (echo "{ \"auths\": " ; cat /var/run/secrets/openshift.io/push/.dockercfg ; echo "}") > /tmp/.dockercfg # push the new image to the target for the build buildah --storage-driver vfs push --tls-verify=false --authfile /tmp/.dockercfg ${TAG}
2.6.3. Build custom builder image
You can use OpenShift Container Platform to build and push custom builder images to use in a custom strategy.
Prerequisites
- Define all the inputs that will go into creating your new custom builder image.
Procedure
Define a
BuildConfig
object that will build your custom builder image:$ oc new-build --binary --strategy=docker --name custom-builder-image
From the directory in which you created your custom build image, run the build:
$ oc start-build custom-builder-image --from-dir . -F
After the build completes, your new custom builder image is available in your project in an image stream tag that is named
custom-builder-image:latest
.
2.6.4. Use custom builder image
You can define a BuildConfig
object that uses the custom strategy in conjunction with your custom builder image to execute your custom build logic.
Prerequisites
- Define all the required inputs for new custom builder image.
- Build your custom builder image.
Procedure
Create a file named
buildconfig.yaml
. This file defines theBuildConfig
object that is created in your project and executed:kind: BuildConfig apiVersion: build.openshift.io/v1 metadata: name: sample-custom-build labels: name: sample-custom-build annotations: template.alpha.openshift.io/wait-for-ready: 'true' spec: strategy: type: Custom customStrategy: forcePull: true from: kind: ImageStreamTag name: custom-builder-image:latest namespace: <yourproject> 1 output: to: kind: ImageStreamTag name: sample-custom:latest
- 1
- Specify your project name.
Create the
BuildConfig
:$ oc create -f buildconfig.yaml
Create a file named
imagestream.yaml
. This file defines the image stream to which the build will push the image:kind: ImageStream apiVersion: image.openshift.io/v1 metadata: name: sample-custom spec: {}
Create the imagestream:
$ oc create -f imagestream.yaml
Run your custom build:
$ oc start-build sample-custom-build -F
When the build runs, it launches a pod running the custom builder image that was built earlier. The pod runs the
build.sh
logic that is defined as the entrypoint for the custom builder image. Thebuild.sh
logic invokes Buildah to build thedockerfile.sample
that was embedded in the custom builder image, and then uses Buildah to push the new image to thesample-custom image stream
.
2.7. Performing and configuring basic builds
The following sections provide instructions for basic build operations, including starting and canceling builds, editing BuildConfigs
, deleting BuildConfigs
, viewing build details, and accessing build logs.
2.7.1. Starting a build
You can manually start a new build from an existing build configuration in your current project.
Procedure
To manually start a build, enter the following command:
$ oc start-build <buildconfig_name>
2.7.1.1. Re-running a build
You can manually re-run a build using the --from-build
flag.
Procedure
To manually re-run a build, enter the following command:
$ oc start-build --from-build=<build_name>
2.7.1.2. Streaming build logs
You can specify the --follow
flag to stream the build’s logs in stdout
.
Procedure
To manually stream a build’s logs in
stdout
, enter the following command:$ oc start-build <buildconfig_name> --follow
2.7.1.3. Setting environment variables when starting a build
You can specify the --env
flag to set any desired environment variable for the build.
Procedure
To specify a desired environment variable, enter the following command:
$ oc start-build <buildconfig_name> --env=<key>=<value>
2.7.1.4. Starting a build with source
Rather than relying on a Git source pull or a Dockerfile for a build, you can also start a build by directly pushing your source, which could be the contents of a Git or SVN working directory, a set of pre-built binary artifacts you want to deploy, or a single file. This can be done by specifying one of the following options for the start-build
command:
Option | Description |
---|---|
| Specifies a directory that will be archived and used as a binary input for the build. |
| Specifies a single file that will be the only file in the build source. The file is placed in the root of an empty directory with the same file name as the original file provided. |
|
Specifies a path to a local repository to use as the binary input for a build. Add the |
When passing any of these options directly to the build, the contents are streamed to the build and override the current build source settings.
Builds triggered from binary input will not preserve the source on the server, so rebuilds triggered by base image changes will use the source specified in the build configuration.
Procedure
Start a build from a source using the following command to send the contents of a local Git repository as an archive from the tag
v2
:$ oc start-build hello-world --from-repo=../hello-world --commit=v2
2.7.2. Canceling a build
You can cancel a build using the web console, or with the following CLI command.
Procedure
To manually cancel a build, enter the following command:
$ oc cancel-build <build_name>
2.7.2.1. Canceling multiple builds
You can cancel multiple builds with the following CLI command.
Procedure
To manually cancel multiple builds, enter the following command:
$ oc cancel-build <build1_name> <build2_name> <build3_name>
2.7.2.2. Canceling all builds
You can cancel all builds from the build configuration with the following CLI command.
Procedure
To cancel all builds, enter the following command:
$ oc cancel-build bc/<buildconfig_name>
2.7.2.3. Canceling all builds in a given state
You can cancel all builds in a given state, such as new
or pending
, while ignoring the builds in other states.
Procedure
To cancel all in a given state, enter the following command:
$ oc cancel-build bc/<buildconfig_name>
2.7.3. Editing a BuildConfig
To edit your build configurations, you use the Edit BuildConfig option in the Builds view of the Developer perspective.
You can use either of the following views to edit a BuildConfig
:
-
The Form view enables you to edit your
BuildConfig
using the standard form fields and checkboxes. -
The YAML view enables you to edit your
BuildConfig
with full control over the operations.
You can switch between the Form view and YAML view without losing any data. The data in the Form view is transferred to the YAML view and vice versa.
Procedure
-
In the Builds view of the Developer perspective, click the menu
to see the Edit BuildConfig option.
- Click Edit BuildConfig to see the Form view option.
In the Git section, enter the Git repository URL for the codebase you want to use to create an application. The URL is then validated.
Optional: Click Show Advanced Git Options to add details such as:
- Git Reference to specify a branch, tag, or commit that contains code you want to use to build the application.
- Context Dir to specify the subdirectory that contains code you want to use to build the application.
- Source Secret to create a Secret Name with credentials for pulling your source code from a private repository.
In the Build from section, select the option that you would like to build from. You can use the following options:
- Image Stream tag references an image for a given image stream and tag. Enter the project, image stream, and tag of the location you would like to build from and push to.
- Image Stream image references an image for a given image stream and image name. Enter the image stream image you would like to build from. Also enter the project, image stream, and tag to push to.
- Docker image: The Docker image is referenced through a Docker image repository. You will also need to enter the project, image stream, and tag to refer to where you would like to push to.
- Optional: In the Environment Variables section, add the environment variables associated with the project by using the Name and Value fields. To add more environment variables, use Add Value, or Add from ConfigMap and Secret .
Optional: To further customize your application, use the following advanced options:
- Trigger
- Triggers a new image build when the builder image changes. Add more triggers by clicking Add Trigger and selecting the Type and Secret.
- Secrets
- Adds secrets for your application. Add more secrets by clicking Add secret and selecting the Secret and Mount point.
- Policy
- Click Run policy to select the build run policy. The selected policy determines the order in which builds created from the build configuration must run.
- Hooks
- Select Run build hooks after image is built to run commands at the end of the build and verify the image. Add Hook type, Command, and Arguments to append to the command.
-
Click Save to save the
BuildConfig
.
2.7.4. Deleting a BuildConfig
You can delete a BuildConfig
using the following command.
Procedure
To delete a
BuildConfig
, enter the following command:$ oc delete bc <BuildConfigName>
This also deletes all builds that were instantiated from this
BuildConfig
.To delete a
BuildConfig
and keep the builds instatiated from theBuildConfig
, specify the--cascade=false
flag when you enter the following command:$ oc delete --cascade=false bc <BuildConfigName>
2.7.5. Viewing build details
You can view build details with the web console or by using the oc describe
CLI command.
This displays information including:
- The build source.
- The build strategy.
- The output destination.
- Digest of the image in the destination registry.
- How the build was created.
If the build uses the Docker
or Source
strategy, the oc describe
output also includes information about the source revision used for the build, including the commit ID, author, committer, and message.
Procedure
To view build details, enter the following command:
$ oc describe build <build_name>
2.7.6. Accessing build logs
You can access build logs using the web console or the CLI.
Procedure
To stream the logs using the build directly, enter the following command:
$ oc describe build <build_name>
2.7.6.1. Accessing BuildConfig logs
You can access BuildConfig
logs using the web console or the CLI.
Procedure
To stream the logs of the latest build for a
BuildConfig
, enter the following command:$ oc logs -f bc/<buildconfig_name>
2.7.6.2. Accessing BuildConfig logs for a given version build
You can access logs for a given version build for a BuildConfig
using the web console or the CLI.
Procedure
To stream the logs for a given version build for a
BuildConfig
, enter the following command:$ oc logs --version=<number> bc/<buildconfig_name>
2.7.6.3. Enabling log verbosity
You can enable a more verbose output by passing the BUILD_LOGLEVEL
environment variable as part of the sourceStrategy
or dockerStrategy
in a BuildConfig
.
An administrator can set the default build verbosity for the entire OpenShift Container Platform instance by configuring env/BUILD_LOGLEVEL
. This default can be overridden by specifying BUILD_LOGLEVEL
in a given BuildConfig
. You can specify a higher priority override on the command line for non-binary builds by passing --build-loglevel
to oc start-build
.
Available log levels for source builds are as follows:
Level 0 |
Produces output from containers running the |
Level 1 | Produces basic information about the executed process. |
Level 2 | Produces very detailed information about the executed process. |
Level 3 | Produces very detailed information about the executed process, and a listing of the archive contents. |
Level 4 | Currently produces the same information as level 3. |
Level 5 | Produces everything mentioned on previous levels and additionally provides docker push messages. |
Procedure
To enable more verbose output, pass the
BUILD_LOGLEVEL
environment variable as part of thesourceStrategy
ordockerStrategy
in aBuildConfig
:sourceStrategy: ... env: - name: "BUILD_LOGLEVEL" value: "2" 1
- 1
- Adjust this value to the desired log level.
2.8. Triggering and modifying builds
The following sections outline how to trigger builds and modify builds using build hooks.
2.8.1. Build triggers
When defining a BuildConfig
, you can define triggers to control the circumstances in which the BuildConfig
should be run. The following build triggers are available:
- Webhook
- Image change
- Configuration change
2.8.1.1. Webhook triggers
Webhook triggers allow you to trigger a new build by sending a request to the OpenShift Container Platform API endpoint. You can define these triggers using GitHub, GitLab, Bitbucket, or Generic webhooks.
Currently, OpenShift Container Platform webhooks only support the analogous versions of the push event for each of the Git-based Source Code Management (SCM) systems. All other event types are ignored.
When the push events are processed, the OpenShift Container Platform control plane host confirms if the branch reference inside the event matches the branch reference in the corresponding BuildConfig
. If so, it then checks out the exact commit reference noted in the webhook event on the OpenShift Container Platform build. If they do not match, no build is triggered.
oc new-app
and oc new-build
create GitHub and Generic webhook triggers automatically, but any other needed webhook triggers must be added manually. You can manually add triggers by setting triggers.
For all webhooks, you must define a secret with a key named WebHookSecretKey
and the value being the value to be supplied when invoking the webhook. The webhook definition must then reference the secret. The secret ensures the uniqueness of the URL, preventing others from triggering the build. The value of the key is compared to the secret provided during the webhook invocation.
For example here is a GitHub webhook with a reference to a secret named mysecret
:
type: "GitHub" github: secretReference: name: "mysecret"
The secret is then defined as follows. Note that the value of the secret is base64 encoded as is required for any data
field of a Secret
object.
- kind: Secret apiVersion: v1 metadata: name: mysecret creationTimestamp: data: WebHookSecretKey: c2VjcmV0dmFsdWUx
2.8.1.1.1. Using GitHub webhooks
GitHub webhooks handle the call made by GitHub when a repository is updated. When defining the trigger, you must specify a secret, which is part of the URL you supply to GitHub when configuring the webhook.
Example GitHub webhook definition:
type: "GitHub" github: secretReference: name: "mysecret"
The secret used in the webhook trigger configuration is not the same as secret
field you encounter when configuring webhook in GitHub UI. The former is to make the webhook URL unique and hard to predict, the latter is an optional string field used to create HMAC hex digest of the body, which is sent as an X-Hub-Signature
header.
The payload URL is returned as the GitHub Webhook URL by the oc describe
command (see Displaying Webhook URLs), and is structured as follows:
Example output
https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/github
Prerequisites
-
Create a
BuildConfig
from a GitHub repository.
Procedure
To configure a GitHub Webhook:
After creating a
BuildConfig
from a GitHub repository, run:$ oc describe bc/<name-of-your-BuildConfig>
This generates a webhook GitHub URL that looks like:
Example output
<https://api.starter-us-east-1.openshift.com:443/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/github
- Cut and paste this URL into GitHub, from the GitHub web console.
-
In your GitHub repository, select Add Webhook from Settings
Webhooks. - Paste the URL output into the Payload URL field.
-
Change the Content Type from GitHub’s default
application/x-www-form-urlencoded
toapplication/json
. Click Add webhook.
You should see a message from GitHub stating that your webhook was successfully configured.
Now, when you push a change to your GitHub repository, a new build automatically starts, and upon a successful build a new deployment starts.
NoteGogs supports the same webhook payload format as GitHub. Therefore, if you are using a Gogs server, you can define a GitHub webhook trigger on your
BuildConfig
and trigger it by your Gogs server as well.
Given a file containing a valid JSON payload, such as
payload.json
, you can manually trigger the webhook withcurl
:$ curl -H "X-GitHub-Event: push" -H "Content-Type: application/json" -k -X POST --data-binary @payload.json https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/github
The
-k
argument is only necessary if your API server does not have a properly signed certificate.
Additional resources
2.8.1.1.2. Using GitLab webhooks
GitLab webhooks handle the call made by GitLab when a repository is updated. As with the GitHub triggers, you must specify a secret. The following example is a trigger definition YAML within the BuildConfig
:
type: "GitLab" gitlab: secretReference: name: "mysecret"
The payload URL is returned as the GitLab Webhook URL by the oc describe
command, and is structured as follows:
Example output
https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/gitlab
Procedure
To configure a GitLab Webhook:
Describe the
BuildConfig
to get the webhook URL:$ oc describe bc <name>
-
Copy the webhook URL, replacing
<secret>
with your secret value. - Follow the GitLab setup instructions to paste the webhook URL into your GitLab repository settings.
Given a file containing a valid JSON payload, such as
payload.json
, you can manually trigger the webhook withcurl
:$ curl -H "X-GitLab-Event: Push Hook" -H "Content-Type: application/json" -k -X POST --data-binary @payload.json https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/gitlab
The
-k
argument is only necessary if your API server does not have a properly signed certificate.
2.8.1.1.3. Using Bitbucket webhooks
Bitbucket webhooks handle the call made by Bitbucket when a repository is updated. Similar to the previous triggers, you must specify a secret. The following example is a trigger definition YAML within the BuildConfig
:
type: "Bitbucket" bitbucket: secretReference: name: "mysecret"
The payload URL is returned as the Bitbucket Webhook URL by the oc describe
command, and is structured as follows:
Example output
https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/bitbucket
Procedure
To configure a Bitbucket Webhook:
Describe the 'BuildConfig' to get the webhook URL:
$ oc describe bc <name>
-
Copy the webhook URL, replacing
<secret>
with your secret value. - Follow the Bitbucket setup instructions to paste the webhook URL into your Bitbucket repository settings.
Given a file containing a valid JSON payload, such as
payload.json
, you can manually trigger the webhook withcurl
:$ curl -H "X-Event-Key: repo:push" -H "Content-Type: application/json" -k -X POST --data-binary @payload.json https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/bitbucket
The
-k
argument is only necessary if your API server does not have a properly signed certificate.
2.8.1.1.4. Using generic webhooks
Generic webhooks are invoked from any system capable of making a web request. As with the other webhooks, you must specify a secret, which is part of the URL that the caller must use to trigger the build. The secret ensures the uniqueness of the URL, preventing others from triggering the build. The following is an example trigger definition YAML within the BuildConfig
:
type: "Generic"
generic:
secretReference:
name: "mysecret"
allowEnv: true 1
- 1
- Set to
true
to allow a generic webhook to pass in environment variables.
Procedure
To set up the caller, supply the calling system with the URL of the generic webhook endpoint for your build:
Example output
https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/generic
The caller must invoke the webhook as a
POST
operation.To invoke the webhook manually you can use
curl
:$ curl -X POST -k https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/generic
The HTTP verb must be set to
POST
. The insecure-k
flag is specified to ignore certificate validation. This second flag is not necessary if your cluster has properly signed certificates.The endpoint can accept an optional payload with the following format:
git: uri: "<url to git repository>" ref: "<optional git reference>" commit: "<commit hash identifying a specific git commit>" author: name: "<author name>" email: "<author e-mail>" committer: name: "<committer name>" email: "<committer e-mail>" message: "<commit message>" env: 1 - name: "<variable name>" value: "<variable value>"
- 1
- Similar to the
BuildConfig
environment variables, the environment variables defined here are made available to your build. If these variables collide with theBuildConfig
environment variables, these variables take precedence. By default, environment variables passed by webhook are ignored. Set theallowEnv
field totrue
on the webhook definition to enable this behavior.
To pass this payload using
curl
, define it in a file namedpayload_file.yaml
and run:$ curl -H "Content-Type: application/yaml" --data-binary @payload_file.yaml -X POST -k https://<openshift_api_host:port>/apis/build.openshift.io/v1/namespaces/<namespace>/buildconfigs/<name>/webhooks/<secret>/generic
The arguments are the same as the previous example with the addition of a header and a payload. The
-H
argument sets theContent-Type
header toapplication/yaml
orapplication/json
depending on your payload format. The--data-binary
argument is used to send a binary payload with newlines intact with thePOST
request.
OpenShift Container Platform permits builds to be triggered by the generic webhook even if an invalid request payload is presented, for example, invalid content type, unparsable or invalid content, and so on. This behavior is maintained for backwards compatibility. If an invalid request payload is presented, OpenShift Container Platform returns a warning in JSON format as part of its HTTP 200 OK
response.
2.8.1.1.5. Displaying webhook URLs
You can use the following command to display webhook URLs associated with a build configuration. If the command does not display any webhook URLs, then no webhook trigger is defined for that build configuration.
Procedure
-
To display any webhook URLs associated with a
BuildConfig
, run:
$ oc describe bc <name>
2.8.1.2. Using image change triggers
As a developer, you can configure your build to run automatically every time a base image changes.
You can use image change triggers to automatically invoke your build when a new version of an upstream image is available. For example, if a build is based on a RHEL image, you can trigger that build to run any time the RHEL image changes. As a result, the application image is always running on the latest RHEL base image.
Image streams that point to container images in v1 container registries only trigger a build once when the image stream tag becomes available and not on subsequent image updates. This is due to the lack of uniquely identifiable images in v1 container registries.
Procedure
Define an
ImageStream
that points to the upstream image you want to use as a trigger:kind: "ImageStream" apiVersion: "v1" metadata: name: "ruby-20-centos7"
This defines the image stream that is tied to a container image repository located at
<system-registry>/<namespace>/ruby-20-centos7
. The<system-registry>
is defined as a service with the namedocker-registry
running in OpenShift Container Platform.If an image stream is the base image for the build, set the
from
field in the build strategy to point to theImageStream
:strategy: sourceStrategy: from: kind: "ImageStreamTag" name: "ruby-20-centos7:latest"
In this case, the
sourceStrategy
definition is consuming thelatest
tag of the image stream namedruby-20-centos7
located within this namespace.Define a build with one or more triggers that point to
ImageStreams
:type: "ImageChange" 1 imageChange: {} type: "ImageChange" 2 imageChange: from: kind: "ImageStreamTag" name: "custom-image:latest"
- 1
- An image change trigger that monitors the
ImageStream
andTag
as defined by the build strategy’sfrom
field. TheimageChange
object here must be empty. - 2
- An image change trigger that monitors an arbitrary image stream. The
imageChange
part, in this case, must include afrom
field that references theImageStreamTag
to monitor.
When using an image change trigger for the strategy image stream, the generated build is supplied with an immutable docker tag that points to the latest image corresponding to that tag. This new image reference is used by the strategy when it executes for the build.
For other image change triggers that do not reference the strategy image stream, a new build is started, but the build strategy is not updated with a unique image reference.
Since this example has an image change trigger for the strategy, the resulting build is:
strategy: sourceStrategy: from: kind: "DockerImage" name: "172.30.17.3:5001/mynamespace/ruby-20-centos7:<immutableid>"
This ensures that the triggered build uses the new image that was just pushed to the repository, and the build can be re-run any time with the same inputs.
You can pause an image change trigger to allow multiple changes on the referenced image stream before a build is started. You can also set the paused
attribute to true when initially adding an ImageChangeTrigger
to a BuildConfig
to prevent a build from being immediately triggered.
type: "ImageChange" imageChange: from: kind: "ImageStreamTag" name: "custom-image:latest" paused: true
In addition to setting the image field for all Strategy
types, for custom builds, the OPENSHIFT_CUSTOM_BUILD_BASE_IMAGE
environment variable is checked. If it does not exist, then it is created with the immutable image reference. If it does exist, then it is updated with the immutable image reference.
If a build is triggered due to a webhook trigger or manual request, the build that is created uses the <immutableid>
resolved from the ImageStream
referenced by the Strategy
. This ensures that builds are performed using consistent image tags for ease of reproduction.
Additional resources
2.8.1.3. Identifying the image change trigger of a build
As a developer, if you have image change triggers, you can identify which image change initiated the last build. This can be useful for debugging or troubleshooting builds.
Example BuildConfig
apiVersion: build.openshift.io/v1 kind: BuildConfig metadata: name: bc-ict-example namespace: bc-ict-example-namespace spec: # ... triggers: - imageChange: from: kind: ImageStreamTag name: input:latest namespace: bc-ict-example-namespace - imageChange: from: kind: ImageStreamTag name: input2:latest namespace: bc-ict-example-namespace type: ImageChange status: imageChangeTriggers: - from: name: input:latest namespace: bc-ict-example-namespace lastTriggerTime: "2021-06-30T13:47:53Z" lastTriggeredImageID: image-registry.openshift-image-registry.svc:5000/bc-ict-example-namespace/input@sha256:0f88ffbeb9d25525720bfa3524cb1bf0908b7f791057cf1acfae917b11266a69 - from: name: input2:latest namespace: bc-ict-example-namespace lastTriggeredImageID: image-registry.openshift-image-registry.svc:5000/bc-ict-example-namespace/input2@sha256:0f88ffbeb9d25525720bfa3524cb2ce0908b7f791057cf1acfae917b11266a69 lastVersion: 1
This example omits elements that are not related to image change triggers.
Prerequisites
- You have configured multiple image change triggers. These triggers have triggered one or more builds.
Procedure
In
buildConfig.status.imageChangeTriggers
to identify thelastTriggerTime
that has the latest timestamp.This
ImageChangeTriggerStatus
Then you use the `name` and `namespace` from that build to find the corresponding image change trigger in `buildConfig.spec.triggers`.
-
Under
imageChangeTriggers
, compare timestamps to identify the latest
Image change triggers
In your build configuration, buildConfig.spec.triggers
is an array of build trigger policies, BuildTriggerPolicy
.
Each BuildTriggerPolicy
has a type
field and set of pointers fields. Each pointer field corresponds to one of the allowed values for the type
field. As such, you can only set BuildTriggerPolicy
to only one pointer field.
For image change triggers, the value of type
is ImageChange
. Then, the imageChange
field is the pointer to an ImageChangeTrigger
object, which has the following fields:
-
lastTriggeredImageID
: This field, which is not shown in the example, is deprecated in OpenShift Container Platform 4.8 and will be ignored in a future release. It contains the resolved image reference for theImageStreamTag
when the last build was triggered from thisBuildConfig
. -
paused
: You can use this field, which is not shown in the example, to temporarily disable this particular image change trigger. -
from
: You use this field to reference theImageStreamTag
that drives this image change trigger. Its type is the core Kubernetes type,OwnerReference
.
The from
field has the following fields of note: kind
: For image change triggers, the only supported value is ImageStreamTag
. namespace
: You use this field to specify the namespace of the ImageStreamTag
. ** name
: You use this field to specify the ImageStreamTag
.
Image change trigger status
In your build configuration, buildConfig.status.imageChangeTriggers
is an array of ImageChangeTriggerStatus
elements. Each ImageChangeTriggerStatus
element includes the from
, lastTriggeredImageID
, and lastTriggerTime
elements shown in the preceding example.
The ImageChangeTriggerStatus
that has the most recent lastTriggerTime
triggered the most recent build. You use its name
and namespace
to identify the image change trigger in buildConfig.spec.triggers
that triggered the build.
The lastTriggerTime
with the most recent timestamp signifies the ImageChangeTriggerStatus
of the last build. This ImageChangeTriggerStatus
has the same name
and namespace
as the image change trigger in buildConfig.spec.triggers
that triggered the build.
Additional resources
2.8.1.4. Configuration change triggers
A configuration change trigger allows a build to be automatically invoked as soon as a new BuildConfig
is created.
The following is an example trigger definition YAML within the BuildConfig
:
type: "ConfigChange"
Configuration change triggers currently only work when creating a new BuildConfig
. In a future release, configuration change triggers will also be able to launch a build whenever a BuildConfig
is updated.
2.8.1.4.1. Setting triggers manually
Triggers can be added to and removed from build configurations with oc set triggers
.
Procedure
To set a GitHub webhook trigger on a build configuration, use:
$ oc set triggers bc <name> --from-github
To set an imagechange trigger, use:
$ oc set triggers bc <name> --from-image='<image>'
To remove a trigger, add
--remove
:$ oc set triggers bc <name> --from-bitbucket --remove
When a webhook trigger already exists, adding it again regenerates the webhook secret.
For more information, consult the help documentation with by running:
$ oc set triggers --help
2.8.2. Build hooks
Build hooks allow behavior to be injected into the build process.
The postCommit
field of a BuildConfig
object runs commands inside a temporary container that is running the build output image. The hook is run immediately after the last layer of the image has been committed and before the image is pushed to a registry.
The current working directory is set to the image’s WORKDIR
, which is the default working directory of the container image. For most images, this is where the source code is located.
The hook fails if the script or command returns a non-zero exit code or if starting the temporary container fails. When the hook fails it marks the build as failed and the image is not pushed to a registry. The reason for failing can be inspected by looking at the build logs.
Build hooks can be used to run unit tests to verify the image before the build is marked complete and the image is made available in a registry. If all tests pass and the test runner returns with exit code 0
, the build is marked successful. In case of any test failure, the build is marked as failed. In all cases, the build log contains the output of the test runner, which can be used to identify failed tests.
The postCommit
hook is not only limited to running tests, but can be used for other commands as well. Since it runs in a temporary container, changes made by the hook do not persist, meaning that running the hook cannot affect the final image. This behavior allows for, among other uses, the installation and usage of test dependencies that are automatically discarded and are not present in the final image.
2.8.2.1. Configuring post commit build hooks
There are different ways to configure the post build hook. All forms in the following examples are equivalent and run bundle exec rake test --verbose
.
Procedure
Shell script:
postCommit: script: "bundle exec rake test --verbose"
The
script
value is a shell script to be run with/bin/sh -ic
. Use this when a shell script is appropriate to execute the build hook. For example, for running unit tests as above. To control the image entry point, or if the image does not have/bin/sh
, usecommand
and/orargs
.NoteThe additional
-i
flag was introduced to improve the experience working with CentOS and RHEL images, and may be removed in a future release.Command as the image entry point:
postCommit: command: ["/bin/bash", "-c", "bundle exec rake test --verbose"]
In this form,
command
is the command to run, which overrides the image entry point in the exec form, as documented in the Dockerfile reference. This is needed if the image does not have/bin/sh
, or if you do not want to use a shell. In all other cases, usingscript
might be more convenient.Command with arguments:
postCommit: command: ["bundle", "exec", "rake", "test"] args: ["--verbose"]
This form is equivalent to appending the arguments to
command
.
Providing both script
and command
simultaneously creates an invalid build hook.
2.8.2.2. Using the CLI to set post commit build hooks
The oc set build-hook
command can be used to set the build hook for a build configuration.
Procedure
To set a command as the post-commit build hook:
$ oc set build-hook bc/mybc \ --post-commit \ --command \ -- bundle exec rake test --verbose
To set a script as the post-commit build hook:
$ oc set build-hook bc/mybc --post-commit --script="bundle exec rake test --verbose"
2.9. Performing advanced builds
The following sections provide instructions for advanced build operations including setting build resources and maximum duration, assigning builds to nodes, chaining builds, build pruning, and build run policies.
2.9.1. Setting build resources
By default, builds are completed by pods using unbound resources, such as memory and CPU. These resources can be limited.
Procedure
You can limit resource use in two ways:
- Limit resource use by specifying resource limits in the default container limits of a project.
Limit resource use by specifying resource limits as part of the build configuration. ** In the following example, each of the
resources
,cpu
, andmemory
parameters are optional:apiVersion: "v1" kind: "BuildConfig" metadata: name: "sample-build" spec: resources: limits: cpu: "100m" 1 memory: "256Mi" 2
However, if a quota has been defined for your project, one of the following two items is required:
A
resources
section set with an explicitrequests
:resources: requests: 1 cpu: "100m" memory: "256Mi"
- 1
- The
requests
object contains the list of resources that correspond to the list of resources in the quota.
A limit range defined in your project, where the defaults from the
LimitRange
object apply to pods created during the build process.Otherwise, build pod creation will fail, citing a failure to satisfy quota.
2.9.2. Setting maximum duration
When defining a BuildConfig
object, you can define its maximum duration by setting the completionDeadlineSeconds
field. It is specified in seconds and is not set by default. When not set, there is no maximum duration enforced.
The maximum duration is counted from the time when a build pod gets scheduled in the system, and defines how long it can be active, including the time needed to pull the builder image. After reaching the specified timeout, the build is terminated by OpenShift Container Platform.
Procedure
To set maximum duration, specify
completionDeadlineSeconds
in yourBuildConfig
. The following example shows the part of aBuildConfig
specifyingcompletionDeadlineSeconds
field for 30 minutes:spec: completionDeadlineSeconds: 1800
This setting is not supported with the Pipeline Strategy option.
2.9.3. Assigning builds to specific nodes
Builds can be targeted to run on specific nodes by specifying labels in the nodeSelector
field of a build configuration. The nodeSelector
value is a set of key-value pairs that are matched to Node
labels when scheduling the build pod.
The nodeSelector
value can also be controlled by cluster-wide default and override values. Defaults will only be applied if the build configuration does not define any key-value pairs for the nodeSelector
and also does not define an explicitly empty map value of nodeSelector:{}
. Override values will replace values in the build configuration on a key by key basis.
If the specified NodeSelector
cannot be matched to a node with those labels, the build still stay in the Pending
state indefinitely.
Procedure
Assign builds to run on specific nodes by assigning labels in the
nodeSelector
field of theBuildConfig
, for example:apiVersion: "v1" kind: "BuildConfig" metadata: name: "sample-build" spec: nodeSelector:1 key1: value1 key2: value2
- 1
- Builds associated with this build configuration will run only on nodes with the
key1=value2
andkey2=value2
labels.
2.9.4. Chained builds
For compiled languages such as Go, C, C++, and Java, including the dependencies necessary for compilation in the application image might increase the size of the image or introduce vulnerabilities that can be exploited.
To avoid these problems, two builds can be chained together. One build that produces the compiled artifact, and a second build that places that artifact in a separate image that runs the artifact.
In the following example, a source-to-image (S2I) build is combined with a docker build to compile an artifact that is then placed in a separate runtime image.
Although this example chains a S2I build and a docker build, the first build can use any strategy that produces an image containing the desired artifacts, and the second build can use any strategy that can consume input content from an image.
The first build takes the application source and produces an image containing a WAR
file. The image is pushed to the artifact-image
image stream. The path of the output artifact depends on the assemble
script of the S2I builder used. In this case, it is output to /wildfly/standalone/deployments/ROOT.war
.
apiVersion: build.openshift.io/v1 kind: BuildConfig metadata: name: artifact-build spec: output: to: kind: ImageStreamTag name: artifact-image:latest source: git: uri: https://github.com/openshift/openshift-jee-sample.git ref: "master" strategy: sourceStrategy: from: kind: ImageStreamTag name: wildfly:10.1 namespace: openshift
The second build uses image source with a path to the WAR file inside the output image from the first build. An inline dockerfile
copies that WAR
file into a runtime image.
apiVersion: build.openshift.io/v1 kind: BuildConfig metadata: name: image-build spec: output: to: kind: ImageStreamTag name: image-build:latest source: dockerfile: |- FROM jee-runtime:latest COPY ROOT.war /deployments/ROOT.war images: - from: 1 kind: ImageStreamTag name: artifact-image:latest paths: 2 - sourcePath: /wildfly/standalone/deployments/ROOT.war destinationDir: "." strategy: dockerStrategy: from: 3 kind: ImageStreamTag name: jee-runtime:latest triggers: - imageChange: {} type: ImageChange
- 1
from
specifies that the docker build should include the output of the image from theartifact-image
image stream, which was the target of the previous build.- 2
paths
specifies which paths from the target image to include in the current docker build.- 3
- The runtime image is used as the source image for the docker build.
The result of this setup is that the output image of the second build does not have to contain any of the build tools that are needed to create the WAR
file. Also, because the second build contains an image change trigger, whenever the first build is run and produces a new image with the binary artifact, the second build is automatically triggered to produce a runtime image that contains that artifact. Therefore, both builds behave as a single build with two stages.
2.9.5. Pruning builds
By default, builds that have completed their lifecycle are persisted indefinitely. You can limit the number of previous builds that are retained.
Procedure
Limit the number of previous builds that are retained by supplying a positive integer value for
successfulBuildsHistoryLimit
orfailedBuildsHistoryLimit
in yourBuildConfig
, for example:apiVersion: "v1" kind: "BuildConfig" metadata: name: "sample-build" spec: successfulBuildsHistoryLimit: 2 1 failedBuildsHistoryLimit: 2 2
Trigger build pruning by one of the following actions:
- Updating a build configuration.
- Waiting for a build to complete its lifecycle.
Builds are sorted by their creation timestamp with the oldest builds being pruned first.
Administrators can manually prune builds using the 'oc adm' object pruning command.
2.9.6. Build run policy
The build run policy describes the order in which the builds created from the build configuration should run. This can be done by changing the value of the runPolicy
field in the spec
section of the Build
specification.
It is also possible to change the runPolicy
value for existing build configurations, by:
-
Changing
Parallel
toSerial
orSerialLatestOnly
and triggering a new build from this configuration causes the new build to wait until all parallel builds complete as the serial build can only run alone. -
Changing
Serial
toSerialLatestOnly
and triggering a new build causes cancellation of all existing builds in queue, except the currently running build and the most recently created build. The newest build runs next.
2.10. Using Red Hat subscriptions in builds
Use the following sections to run entitled builds on OpenShift Container Platform.
2.10.1. Creating an image stream tag for the Red Hat Universal Base Image
To use Red Hat subscriptions within a build, you create an image stream tag to reference the Universal Base Image (UBI).
To make the UBI available in every project in the cluster, you add the image stream tag to the openshift
namespace. Otherwise, to make it available in a specific project, you add the image stream tag to that project.
The benefit of using image stream tags this way is that doing so grants access to the UBI based on the registry.redhat.io
credentials in the install pull secret without exposing the pull secret to other users. This is more convenient than requiring each developer to install pull secrets with registry.redhat.io
credentials in each project.
Procedure
To create an
ImageStreamTag
in theopenshift
namespace, so it is available to developers in all projects, enter:$ oc tag --source=docker registry.redhat.io/ubi8/ubi:latest ubi:latest -n openshift
TipYou can alternatively apply the following YAML to create an
ImageStreamTag
in theopenshift
namespace:apiVersion: image.openshift.io/v1 kind: ImageStream metadata: name: ubi namespace: openshift spec: tags: - from: kind: DockerImage name: registry.redhat.io/ubi8/ubi:latest name: latest referencePolicy: type: Source
To create an
ImageStreamTag
in a single project, enter:$ oc tag --source=docker registry.redhat.io/ubi8/ubi:latest ubi:latest
TipYou can alternatively apply the following YAML to create an
ImageStreamTag
in a single project:apiVersion: image.openshift.io/v1 kind: ImageStream metadata: name: ubi spec: tags: - from: kind: DockerImage name: registry.redhat.io/ubi8/ubi:latest name: latest referencePolicy: type: Source
2.10.2. Adding subscription entitlements as a build secret
Builds that use Red Hat subscriptions to install content must include the entitlement keys as a build secret.
Prerequisites
You must have access to Red Hat entitlements through your subscription. The entitlement secret is automatically created by the Insights Operator.
When you perform an Entitlement Build using Red Hat Enterprise Linux (RHEL) 7, you must have the following instructions in your Dockerfile before you run any yum
commands:
RUN rm /etc/rhsm-host
Procedure
Add the etc-pki-entitlement secret as a build volume in the build configuration’s Docker strategy:
strategy: dockerStrategy: from: kind: ImageStreamTag name: ubi:latest volumes: - name: etc-pki-entitlement mounts: - destinationPath: /etc/pki/entitlement source: type: Secret secret: secretName: etc-pki-entitlement
2.10.3. Running builds with Subscription Manager
2.10.3.1. Docker builds using Subscription Manager
Docker strategy builds can use the Subscription Manager to install subscription content.
Prerequisites
The entitlement keys must be added as build strategy volumes.
Procedure
Use the following as an example Dockerfile to install content with the Subscription Manager:
FROM registry.redhat.io/ubi8/ubi:latest RUN dnf search kernel-devel --showduplicates && \ dnf install -y kernel-devel
2.10.4. Running builds with Red Hat Satellite subscriptions
2.10.4.1. Adding Red Hat Satellite configurations to builds
Builds that use Red Hat Satellite to install content must provide appropriate configurations to obtain content from Satellite repositories.
Prerequisites
You must provide or create a
yum
-compatible repository configuration file that downloads content from your Satellite instance.Sample repository configuration
[test-<name>] name=test-<number> baseurl = https://satellite.../content/dist/rhel/server/7/7Server/x86_64/os enabled=1 gpgcheck=0 sslverify=0 sslclientkey = /etc/pki/entitlement/...-key.pem sslclientcert = /etc/pki/entitlement/....pem
Procedure
Create a
ConfigMap
containing the Satellite repository configuration file:$ oc create configmap yum-repos-d --from-file /path/to/satellite.repo
Add the Satellite repository configuration and entitlement key as a build volumes:
strategy: dockerStrategy: from: kind: ImageStreamTag name: ubi:latest volumes: - name: yum-repos-d mounts: - destinationPath: /etc/yum.repos.d source: type: ConfigMap configMap: name: yum-repos-d - name: etc-pki-entitlement mounts: - destinationPath: /etc/pki/entitlement source: type: Secret secret: secretName: etc-pki-entitlement
2.10.4.2. Docker builds using Red Hat Satellite subscriptions
Docker strategy builds can use Red Hat Satellite repositories to install subscription content.
Prerequisites
- You have added the entitlement keys and Satellite repository configurations as build volumes.
Procedure
Use the following as an example Dockerfile to install content with Satellite:
FROM registry.redhat.io/ubi8/ubi:latest RUN dnf search kernel-devel --showduplicates && \ dnf install -y kernel-devel
2.10.5. Additional resources
2.11. Securing builds by strategy
Builds in OpenShift Container Platform are run in privileged containers. Depending on the build strategy used, if you have privileges, you can run builds to escalate their permissions on the cluster and host nodes. And as a security measure, it limits who can run builds and the strategy that is used for those builds. Custom builds are inherently less safe than source builds, because they can execute any code within a privileged container, and are disabled by default. Grant docker build permissions with caution, because a vulnerability in the Dockerfile processing logic could result in a privileges being granted on the host node.
By default, all users that can create builds are granted permission to use the docker and Source-to-image (S2I) build strategies. Users with cluster administrator privileges can enable the custom build strategy, as referenced in the restricting build strategies to a user globally section.
You can control who can build and which build strategies they can use by using an authorization policy. Each build strategy has a corresponding build subresource. A user must have permission to create a build and permission to create on the build strategy subresource to create builds using that strategy. Default roles are provided that grant the create permission on the build strategy subresource.
Strategy | Subresource | Role |
---|---|---|
Docker | builds/docker | system:build-strategy-docker |
Source-to-Image | builds/source | system:build-strategy-source |
Custom | builds/custom | system:build-strategy-custom |
JenkinsPipeline | builds/jenkinspipeline | system:build-strategy-jenkinspipeline |
2.11.1. Disabling access to a build strategy globally
To prevent access to a particular build strategy globally, log in as a user with cluster administrator privileges, remove the corresponding role from the system:authenticated
group, and apply the annotation rbac.authorization.kubernetes.io/autoupdate: "false"
to protect them from changes between the API restarts. The following example shows disabling the docker build strategy.
Procedure
Apply the
rbac.authorization.kubernetes.io/autoupdate
annotation:$ oc edit clusterrolebinding system:build-strategy-docker-binding
Example output
apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: annotations: rbac.authorization.kubernetes.io/autoupdate: "false" 1 creationTimestamp: 2018-08-10T01:24:14Z name: system:build-strategy-docker-binding resourceVersion: "225" selfLink: /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/system%3Abuild-strategy-docker-binding uid: 17b1f3d4-9c3c-11e8-be62-0800277d20bf roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:build-strategy-docker subjects: - apiGroup: rbac.authorization.k8s.io kind: Group name: system:authenticated
- 1
- Change the
rbac.authorization.kubernetes.io/autoupdate
annotation’s value to"false"
.
Remove the role:
$ oc adm policy remove-cluster-role-from-group system:build-strategy-docker system:authenticated
Ensure the build strategy subresources are also removed from these roles:
$ oc edit clusterrole admin
$ oc edit clusterrole edit
For each role, specify the subresources that correspond to the resource of the strategy to disable.
Disable the docker Build Strategy for admin:
kind: ClusterRole metadata: name: admin ... - apiGroups: - "" - build.openshift.io resources: - buildconfigs - buildconfigs/webhooks - builds/custom 1 - builds/source verbs: - create - delete - deletecollection - get - list - patch - update - watch ...
- 1
- Add
builds/custom
andbuilds/source
to disable docker builds globally for users with the admin role.
2.11.2. Restricting build strategies to users globally
You can allow a set of specific users to create builds with a particular strategy.
Prerequisites
- Disable global access to the build strategy.
Procedure
Assign the role that corresponds to the build strategy to a specific user. For example, to add the
system:build-strategy-docker
cluster role to the userdevuser
:$ oc adm policy add-cluster-role-to-user system:build-strategy-docker devuser
WarningGranting a user access at the cluster level to the
builds/docker
subresource means that the user can create builds with the docker strategy in any project in which they can create builds.
2.11.3. Restricting build strategies to a user within a project
Similar to granting the build strategy role to a user globally, you can allow a set of specific users within a project to create builds with a particular strategy.
Prerequisites
- Disable global access to the build strategy.
Procedure
Assign the role that corresponds to the build strategy to a specific user within a project. For example, to add the
system:build-strategy-docker
role within the projectdevproject
to the userdevuser
:$ oc adm policy add-role-to-user system:build-strategy-docker devuser -n devproject
2.12. Build configuration resources
Use the following procedure to configure build settings.
2.12.1. Build controller configuration parameters
The build.config.openshift.io/cluster
resource offers the following configuration parameters.
Parameter | Description |
---|---|
|
Holds cluster-wide information on how to handle builds. The canonical, and only valid name is
|
| Controls the default information for builds.
You can override values by setting the
Values that are not set here are inherited from DefaultProxy.
|
|
|
| Controls override settings for builds.
|
|
|
2.12.2. Configuring build settings
You can configure build settings by editing the build.config.openshift.io/cluster
resource.
Procedure
Edit the
build.config.openshift.io/cluster
resource:$ oc edit build.config.openshift.io/cluster
The following is an example
build.config.openshift.io/cluster
resource:apiVersion: config.openshift.io/v1 kind: Build1 metadata: annotations: release.openshift.io/create-only: "true" creationTimestamp: "2019-05-17T13:44:26Z" generation: 2 name: cluster resourceVersion: "107233" selfLink: /apis/config.openshift.io/v1/builds/cluster uid: e2e9cc14-78a9-11e9-b92b-06d6c7da38dc spec: buildDefaults:2 defaultProxy:3 httpProxy: http://proxy.com httpsProxy: https://proxy.com noProxy: internal.com env:4 - name: envkey value: envvalue gitProxy:5 httpProxy: http://gitproxy.com httpsProxy: https://gitproxy.com noProxy: internalgit.com imageLabels:6 - name: labelkey value: labelvalue resources:7 limits: cpu: 100m memory: 50Mi requests: cpu: 10m memory: 10Mi buildOverrides:8 imageLabels:9 - name: labelkey value: labelvalue nodeSelector:10 selectorkey: selectorvalue tolerations:11 - effect: NoSchedule key: node-role.kubernetes.io/builds operator: Exists
- 1
Build
: Holds cluster-wide information on how to handle builds. The canonical, and only valid name iscluster
.- 2
buildDefaults
: Controls the default information for builds.- 3
defaultProxy
: Contains the default proxy settings for all build operations, including image pull or push and source download.- 4
env
: A set of default environment variables that are applied to the build if the specified variables do not exist on the build.- 5
gitProxy
: Contains the proxy settings for Git operations only. If set, this overrides any Proxy settings for all Git commands, such asgit clone
.- 6
imageLabels
: A list of labels that are applied to the resulting image. You can override a default label by providing a label with the same name in theBuildConfig
.- 7
resources
: Defines resource requirements to execute the build.- 8
buildOverrides
: Controls override settings for builds.- 9
imageLabels
: A list of labels that are applied to the resulting image. If you provided a label in theBuildConfig
with the same name as one in this table, your label will be overwritten.- 10
nodeSelector
: A selector which must be true for the build pod to fit on a node.- 11
tolerations
: A list of tolerations that overrides any existing tolerations set on a build pod.
2.13. Troubleshooting builds
Use the following to troubleshoot build issues.
2.13.1. Resolving denial for access to resources
If your request for access to resources is denied:
- Issue
- A build fails with:
requested access to the resource is denied
- Resolution
- You have exceeded one of the image quotas set on your project. Check your current quota and verify the limits applied and storage in use:
$ oc describe quota
2.13.2. Service certificate generation failure
If your request for access to resources is denied:
- Issue
-
If a service certificate generation fails with (service’s
service.beta.openshift.io/serving-cert-generation-error
annotation contains):
Example output
secret/ssl-key references serviceUID 62ad25ca-d703-11e6-9d6f-0e9c0057b608, which does not match 77b6dd80-d716-11e6-9d6f-0e9c0057b60
- Resolution
-
The service that generated the certificate no longer exists, or has a different
serviceUID
. You must force certificates regeneration by removing the old secret, and clearing the following annotations on the service:service.beta.openshift.io/serving-cert-generation-error
andservice.beta.openshift.io/serving-cert-generation-error-num
:
$ oc delete secret <secret_name>
$ oc annotate service <service_name> service.beta.openshift.io/serving-cert-generation-error-
$ oc annotate service <service_name> service.beta.openshift.io/serving-cert-generation-error-num-
The command removing annotation has a -
after the annotation name to be removed.
2.14. Setting up additional trusted certificate authorities for builds
Use the following sections to set up additional certificate authorities (CA) to be trusted by builds when pulling images from an image registry.
The procedure requires a cluster administrator to create a ConfigMap
and add additional CAs as keys in the ConfigMap
.
-
The
ConfigMap
must be created in theopenshift-config
namespace. domain
is the key in theConfigMap
andvalue
is the PEM-encoded certificate.-
Each CA must be associated with a domain. The domain format is
hostname[..port]
.
-
Each CA must be associated with a domain. The domain format is
-
The
ConfigMap
name must be set in theimage.config.openshift.io/cluster
cluster scoped configuration resource’sspec.additionalTrustedCA
field.
2.14.1. Adding certificate authorities to the cluster
You can add certificate authorities (CA) to the cluster for use when pushing and pulling images with the following procedure.
Prerequisites
- You must have cluster administrator privileges.
-
You must have access to the public certificates of the registry, usually a
hostname/ca.crt
file located in the/etc/docker/certs.d/
directory.
Procedure
Create a
ConfigMap
in theopenshift-config
namespace containing the trusted certificates for the registries that use self-signed certificates. For each CA file, ensure the key in theConfigMap
is the hostname of the registry in thehostname[..port]
format:$ oc create configmap registry-cas -n openshift-config \ --from-file=myregistry.corp.com..5000=/etc/docker/certs.d/myregistry.corp.com:5000/ca.crt \ --from-file=otherregistry.com=/etc/docker/certs.d/otherregistry.com/ca.crt
Update the cluster image configuration:
$ oc patch image.config.openshift.io/cluster --patch '{"spec":{"additionalTrustedCA":{"name":"registry-cas"}}}' --type=merge