Chapter 1. Technology Previews

Starting with Red Hat Enterprise Linux 5.3, CIFS supports Distributed File System (DFS) as a Technology Preview.

Package: kernel-2.6.18-308

CTDB is a clustered database based on Samba's Trivial Database (TDB). The ctdb package is a cluster implementation used to store temporary data. If an application is already using TBD for temporary data storage, it can be very easily converted to be cluster-aware and use CTDB.

Package: ctdb-1.0.112-1

In Red Hat Enterprise Linux 5.8, users can use their Kerberos credentials to perform a CIFS mount.

Package: samba-client-3.0.33-3.37

The bfa/bna driver for Brocade Fibre Channel Host Bus adapters is considered a Technology Preview in Red Hat Enterprise Linux 5.8. (BZ#475695)

Package: kernel-2.6.18-308

FreeIPMI is included in as a Technology Preview. FreeIPMI is a collection of Intelligent Platform Management IPMI system software. It provides in-band and out-of-band software, along with a development library conforming to the Intelligent Platform Management Interface (IPMI v1.5 and v2.0) standards.

For more information about FreeIPMI, refer to http://www.gnu.org/software/freeipmi/

Package: freeipmi-0.5.1-7

TrouSerS and tpm-tools are included in this release to enable use of Trusted Platform Module (TPM) hardware. TPM hardware features include (among others):

TrouSerS is an implementation of the Trusted Computing Group's Software Stack (TSS) specification. You can use TrouSerS to write applications that make use of TPM hardware. tpm-tools is a suite of tools used to manage and utilize TPM hardware.

For more information about TrouSerS, refer to http://trousers.sourceforge.net/.

Packages: tpm-tools-1.3.1-1, trousers-0.3.1-4

eCryptfs is a stacked cryptographic file system for Linux. It mounts on individual directories in existing mounted lower file systems such as EXT3; there is no need to change existing partitions or file systems in order to start using eCryptfs. eCryptfs is released as a Technology Preview for Red Hat Enterprise Linux 5.8.

For more information about eCryptfs, refer to http://ecryptfs.sf.net. You can also refer to http://ecryptfs.sourceforge.net/README and http://ecryptfs.sourceforge.net/ecryptfs-faq.html for basic setup information.

Package: ecryptfs-utils-75-8

Stateless Linux, included as a Technology Preview, is a new way of thinking about how a system should be run and managed, designed to simplify provisioning and management of large numbers of systems by making them easily replaceable. This is accomplished primarily by establishing prepared system images which get replicated and managed across a large number of stateless systems, running the operating system in a read-only manner (refer to /etc/sysconfig/readonly-root for more details).

In its current state of development, the Stateless features are subsets of the intended goals. As such, the capability remains as Technology Preview.

Red Hat recommends that those interested in testing stateless code join the stateless-list@redhat.com mailing list.

The enabling infrastructure pieces for Stateless Linux were originally introduced in Red Hat Enterprise Linux 5.

AIGLX is a Technology Preview feature of the otherwise fully supported X server. It aims to enable GL-accelerated effects on a standard desktop. The project consists of the following:

By installing these components, you can have GL-accelerated effects on your desktop with very few changes, as well as the ability to enable and disable them at will without replacing your X server. AIGLX also enables remote GLX applications to take advantage of hardware GLX acceleration.

Packages: X Window System group of packages.

The firewire-sbp2 module is included in this update as a Technology Preview. This module enables connectivity with FireWire storage devices and scanners.

At present, FireWire does not support the following:

In addition, the following issues still exist in FireWire:

Package: kernel-2.6.18-308

Device Failure Monitoring, using the dmraid and dmevent_tool tools, is included in Red Hat Enterprise Linux 5.8 as a Technology Preview. This Technology Preview provides the ability to watch and report device failures on component devices of RAID sets.

Packages: dmraid-1.0.0.rc13-65, dmraid-events-1.0.0.rc13-65

Serial General Purpose Input Output (SGPIO) is an industry standard communication method used between a main board and a variety of internal and external hard disk drive bay enclosures. This method can be used to control LED lights on an enclosure through the AHCI driver interface.

In this release, SGPIO support in dmraid is included as a technology preview. This will allow dmraid to work properly with disk enclosures.

Package: dmraid-1.0.0.rc13-65

In this update, the kernel marker/tracepoint facility remains a Technology Preview. This interface adds static probe points into the kernel, for use with tools such as SystemTap.

Package: kernel-2.6.18-308

The Fibre Channel over Ethernet (FCoE) driver (fcoe.ko), along with libfc, provides the ability to run FCoE over a standard Ethernet card. This capability is provided as a Technology Preview in Red Hat Enterprise Linux 5.8.

To enable this feature, you must login by writing the network interface name to the /sys/module/fcoe/parameters/create file, for example:

~]# echo eth6 > /sys/module/fcoe/parameters/create

To logout, write the network interface name to the /sys/module/fcoe/parameters/destroy file, for example:

~]# echo eth6 > /sys/module/fcoe/parameters/destroy

For further information on software based FCoE refer to: http://www.open-fcoe.org/open-fcoe/wiki/quickstart.

Red Hat Enterprise Linux 5.8 provides full support for FCoE on three specialized hardware implementations. These are: Cisco fnic driver, the Emulex lpfc driver, and the Qlogic qla2xx driver.

Package: kernel-2.6.18-308

iSER support, allowing for block storage transfer across a network and provided by the scsi-target-utils package, remains a Technology Preview in Red Hat Enterprise Linux 5.8. In this release, single portal and multiple portals on different subnets are supported. There are known issues related to using multiple portals on the same subnet.

To set up the iSER target component install the scsi-target-utils and libibverbs-devel packages. The library package for the InfiniBand hardware that is being used is also required. For example: host channel adapters that use the cxgb3 driver the libcxgb3 package is needed, and for host channel adapters using the mthca driver the libmthca package is needed.

There is also a known issue relating to connection timeouts in some situations. Refer to BZ#470627 for more information on this issue.

Package: scsi-target-utils-1.0.14-2, other above-mentioned system-specific packages

The fence_virsh fence agent is provided in this release of Red Hat Enterprise Linux as a Technology Preview. fence_virsh provides the ability for one guest (running as a domU) to fence another using the libvirt protocol. However, as fence_virsh is not integrated with cluster-suite it is not supported as a fence agent in that environment.

Package: cman-2.0.115-96

The upstream glibc has been changed to enable higher scalability across many sockets and cores. This is done by assigning threads their own memory pools and by avoiding locking in some situations. The amount of additional memory used for the memory pools (if any) can be controlled using the environment variables MALLOC_ARENA_TEST and MALLOC_ARENA_MAX.

MALLOC_ARENA_TEST specifies that a test for the number of cores is performed once the number of memory pools reaches this value. MALLOC_ARENA_MAX sets the maximum number of memory pools used, regardless of the number of cores.

The glibc in the Red Hat Enterprise Linux 5.8 release has this functionality integrated as a Technology Preview of the upstream malloc. To enable the per-thread memory pools the environment variable MALLOC_PER_THREAD needs to be set in the environment. This environment variable will become obsolete when this new malloc behavior becomes default in future releases. Users experiencing contention for the malloc resources could try enabling this option.

Package: glibc-2.5-81