이 콘텐츠는 선택한 언어로 제공되지 않습니다.
7.3. Common iptables Filtering
Keeping remote attackers out of a LAN is an important aspect of network security, if not the most important. The integrity of a LAN should be protected from malicious remote users through the use of stringent firewall rules. However, with a default policy set to block all incoming, outgoing, and forwarded packets, it is impossible for the firewall/gateway and internal LAN users to communicate with each other or with external resources. To allow users to perform network-related functions and use networking applications, administrators must open certain ports for communication.
For example, to allow access to port 80 on the firewall, append the following rule:
iptables -A INPUT -p tcp -m tcp --sport 80 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 80 -j ACCEPT
This allows regular Web browsing from websites that communicate via port 80. To allow access to secure websites (such as https://www.example.com/), you must open port 443, as well.
iptables -A INPUT -p tcp -m tcp --sport 443 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT Important
When creating an
iptables ruleset, it is critical to remember that order is important. For example, if one chain that specifies that any packets from the local 192.168.100.0/24 subnet be dropped, and then another chain is appended (-A) to allow packets from 192.168.100.13 (which is within the dropped restricted subnet), then the appended rule is ignored. You must set a rule to allow 192.168.100.13 first, and then set a drop rule on the subnet.
To arbitrarily insert a rule in an existing chain of rules, use
-I, followed by the chain in which to insert the rule, and a rule number (1,2,3,...,n) for where the rule should reside. For example:
iptables -I INPUT 1 -i lo -p all -j ACCEPT
The rule is inserted as the first rule in the INPUT chain to allow local loopback device traffic.
There may be times when you require remote access to the LAN from outside the LAN. Secure services such as SSH, can be used for encrypted remote connection to LAN services. For administrators with PPP-based resources (such as modem banks or bulk ISP accounts), dial-up access can be used to circumvent firewall barriers securely, as modem connections are typically behind a firewall/gateway because they are direct connections. However, for remote users with broadband connections, special cases can be made. You can configure
iptables to accept connections from remote SSH clients. For example, to allow remote SSH access, the following rules may be used:
iptables -A INPUT -p tcp --dport 22 -j ACCEPTiptables -A OUTPUT -p udp --sport 22 -j ACCEPT
There are other services for which you may need to define rules. Refer to the Reference Guide for comprehensive information on
iptables and its various options.
These rules allow incoming and outbound access for an individual system, such as a single PC directly connected to the Internet or a firewall/gateway. However, they do not allow nodes behind the firewall/gateway to access these services. To allow LAN access to these services, you can use NAT with
iptables filtering rules.
