Este conteúdo não está disponível no idioma selecionado.
Chapter 12. Installing a cluster on GCP in a restricted network with user-provisioned infrastructure
In OpenShift Container Platform version 4.17, you can install a cluster on Google Cloud Platform (GCP) that uses infrastructure that you provide and an internal mirror of the installation release content.
While you can install an OpenShift Container Platform cluster by using mirrored installation release content, your cluster still requires internet access to use the GCP APIs.
The steps for performing a user-provided infrastructure install are outlined here. Several Deployment Manager templates are provided to assist in completing these steps or to help model your own. You are also free to create the required resources through other methods.
The steps for performing a user-provisioned infrastructure installation are provided as an example only. Installing a cluster with infrastructure you provide requires knowledge of the cloud provider and the installation process of OpenShift Container Platform. Several Deployment Manager templates are provided to assist in completing these steps or to help model your own. You are also free to create the required resources through other methods; the templates are just an example.
12.1. Prerequisites
- You reviewed details about the OpenShift Container Platform installation and update processes.
- You read the documentation on selecting a cluster installation method and preparing it for users.
You created a registry on your mirror host and obtained the
imageContentSources
data for your version of OpenShift Container Platform.ImportantBecause the installation media is on the mirror host, you can use that computer to complete all installation steps.
-
If you use a firewall, you configured it to allow the sites that your cluster requires access to. While you might need to grant access to more sites, you must grant access to
*.googleapis.com
andaccounts.google.com
. -
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the
kube-system
namespace, you can manually create and maintain long-term credentials.
12.2. About installations in restricted networks
In OpenShift Container Platform 4.17, you can perform an installation that does not require an active connection to the internet to obtain software components. Restricted network installations can be completed using installer-provisioned infrastructure or user-provisioned infrastructure, depending on the cloud platform to which you are installing the cluster.
If you choose to perform a restricted network installation on a cloud platform, you still require access to its cloud APIs. Some cloud functions, like Amazon Web Service’s Route 53 DNS and IAM services, require internet access. Depending on your network, you might require less internet access for an installation on bare metal hardware, Nutanix, or on VMware vSphere.
To complete a restricted network installation, you must create a registry that mirrors the contents of the OpenShift image registry and contains the installation media. You can create this registry on a mirror host, which can access both the internet and your closed network, or by using other methods that meet your restrictions.
Because of the complexity of the configuration for user-provisioned installations, consider completing a standard user-provisioned infrastructure installation before you attempt a restricted network installation using user-provisioned infrastructure. Completing this test installation might make it easier to isolate and troubleshoot any issues that might arise during your installation in a restricted network.
12.2.1. Additional limits
Clusters in restricted networks have the following additional limitations and restrictions:
-
The
ClusterVersion
status includes anUnable to retrieve available updates
error. - By default, you cannot use the contents of the Developer Catalog because you cannot access the required image stream tags.
12.3. Internet access for OpenShift Container Platform
In OpenShift Container Platform 4.17, you require access to the internet to obtain the images that are necessary to install your cluster.
You must have internet access to:
- Access OpenShift Cluster Manager to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
- Access Quay.io to obtain the packages that are required to install your cluster.
- Obtain the packages that are required to perform cluster updates.
12.4. Configuring your GCP project
Before you can install OpenShift Container Platform, you must configure a Google Cloud Platform (GCP) project to host it.
12.4.1. Creating a GCP project
To install OpenShift Container Platform, you must create a project in your Google Cloud Platform (GCP) account to host the cluster.
Procedure
Create a project to host your OpenShift Container Platform cluster. See Creating and Managing Projects in the GCP documentation.
ImportantYour GCP project must use the Premium Network Service Tier if you are using installer-provisioned infrastructure. The Standard Network Service Tier is not supported for clusters installed using the installation program. The installation program configures internal load balancing for the
api-int.<cluster_name>.<base_domain>
URL; the Premium Tier is required for internal load balancing.
12.4.2. Enabling API services in GCP
Your Google Cloud Platform (GCP) project requires access to several API services to complete OpenShift Container Platform installation.
Prerequisites
- You created a project to host your cluster.
Procedure
Enable the following required API services in the project that hosts your cluster. You may also enable optional API services which are not required for installation. See Enabling services in the GCP documentation.
Table 12.1. Required API services API service Console service name Compute Engine API
compute.googleapis.com
Cloud Resource Manager API
cloudresourcemanager.googleapis.com
Google DNS API
dns.googleapis.com
IAM Service Account Credentials API
iamcredentials.googleapis.com
Identity and Access Management (IAM) API
iam.googleapis.com
Service Usage API
serviceusage.googleapis.com
Table 12.2. Optional API services API service Console service name Google Cloud APIs
cloudapis.googleapis.com
Service Management API
servicemanagement.googleapis.com
Google Cloud Storage JSON API
storage-api.googleapis.com
Cloud Storage
storage-component.googleapis.com
12.4.3. Configuring DNS for GCP
To install OpenShift Container Platform, the Google Cloud Platform (GCP) account you use must have a dedicated public hosted zone in the same project that you host the OpenShift Container Platform cluster. This zone must be authoritative for the domain. The DNS service provides cluster DNS resolution and name lookup for external connections to the cluster.
Procedure
Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through GCP or another source.
NoteIf you purchase a new domain, it can take time for the relevant DNS changes to propagate. For more information about purchasing domains through Google, see Google Domains.
Create a public hosted zone for your domain or subdomain in your GCP project. See Creating public zones in the GCP documentation.
Use an appropriate root domain, such as
openshiftcorp.com
, or subdomain, such asclusters.openshiftcorp.com
.Extract the new authoritative name servers from the hosted zone records. See Look up your Cloud DNS name servers in the GCP documentation.
You typically have four name servers.
- Update the registrar records for the name servers that your domain uses. For example, if you registered your domain to Google Domains, see the following topic in the Google Domains Help: How to switch to custom name servers.
- If you migrated your root domain to Google Cloud DNS, migrate your DNS records. See Migrating to Cloud DNS in the GCP documentation.
- If you use a subdomain, follow your company’s procedures to add its delegation records to the parent domain. This process might include a request to your company’s IT department or the division that controls the root domain and DNS services for your company.
12.4.4. GCP account limits
The OpenShift Container Platform cluster uses a number of Google Cloud Platform (GCP) components, but the default Quotas do not affect your ability to install a default OpenShift Container Platform cluster.
A default cluster, which contains three compute and three control plane machines, uses the following resources. Note that some resources are required only during the bootstrap process and are removed after the cluster deploys.
Service | Component | Location | Total resources required | Resources removed after bootstrap |
---|---|---|---|---|
Service account | IAM | Global | 6 | 1 |
Firewall rules | Networking | Global | 11 | 1 |
Forwarding rules | Compute | Global | 2 | 0 |
Health checks | Compute | Global | 2 | 0 |
Images | Compute | Global | 1 | 0 |
Networks | Networking | Global | 1 | 0 |
Routers | Networking | Global | 1 | 0 |
Routes | Networking | Global | 2 | 0 |
Subnetworks | Compute | Global | 2 | 0 |
Target pools | Networking | Global | 2 | 0 |
If any of the quotas are insufficient during installation, the installation program displays an error that states both which quota was exceeded and the region.
Be sure to consider your actual cluster size, planned cluster growth, and any usage from other clusters that are associated with your account. The CPU, static IP addresses, and persistent disk SSD (storage) quotas are the ones that are most likely to be insufficient.
If you plan to deploy your cluster in one of the following regions, you will exceed the maximum storage quota and are likely to exceed the CPU quota limit:
-
asia-east2
-
asia-northeast2
-
asia-south1
-
australia-southeast1
-
europe-north1
-
europe-west2
-
europe-west3
-
europe-west6
-
northamerica-northeast1
-
southamerica-east1
-
us-west2
You can increase resource quotas from the GCP console, but you might need to file a support ticket. Be sure to plan your cluster size early so that you can allow time to resolve the support ticket before you install your OpenShift Container Platform cluster.
12.4.5. Creating a service account in GCP
OpenShift Container Platform requires a Google Cloud Platform (GCP) service account that provides authentication and authorization to access data in the Google APIs. If you do not have an existing IAM service account that contains the required roles in your project, you must create one.
Prerequisites
- You created a project to host your cluster.
Procedure
- Create a service account in the project that you use to host your OpenShift Container Platform cluster. See Creating a service account in the GCP documentation.
Grant the service account the appropriate permissions. You can either grant the individual permissions that follow or assign the
Owner
role to it. See Granting roles to a service account for specific resources.NoteWhile making the service account an owner of the project is the easiest way to gain the required permissions, it means that service account has complete control over the project. You must determine if the risk that comes from offering that power is acceptable.
You can create the service account key in JSON format, or attach the service account to a GCP virtual machine. See Creating service account keys and Creating and enabling service accounts for instances in the GCP documentation.
NoteIf you use a virtual machine with an attached service account to create your cluster, you must set
credentialsMode: Manual
in theinstall-config.yaml
file before installation.
12.4.6. Required GCP roles
When you attach the Owner
role to the service account that you create, you grant that service account all permissions, including those that are required to install OpenShift Container Platform. If your organization’s security policies require a more restrictive set of permissions, you can create a service account with the following permissions. If you deploy your cluster into an existing virtual private cloud (VPC), the service account does not require certain networking permissions, which are noted in the following lists:
Required roles for the installation program
- Compute Admin
- Role Administrator
- Security Admin
- Service Account Admin
- Service Account Key Admin
- Service Account User
- Storage Admin
Required roles for creating network resources during installation
- DNS Administrator
Required roles for using the Cloud Credential Operator in passthrough mode
- Compute Load Balancer Admin
- Tag User
Required roles for user-provisioned GCP infrastructure
- Deployment Manager Editor
The following roles are applied to the service accounts that the control plane and compute machines use:
Account | Roles |
---|---|
Control Plane |
|
| |
| |
| |
| |
Compute |
|
| |
|
12.4.7. Required GCP permissions for user-provisioned infrastructure
When you attach the Owner
role to the service account that you create, you grant that service account all permissions, including those that are required to install OpenShift Container Platform.
If your organization’s security policies require a more restrictive set of permissions, you can create custom roles with the necessary permissions. The following permissions are required for the user-provisioned infrastructure for creating and deleting the OpenShift Container Platform cluster.
Example 12.1. Required permissions for creating network resources
-
compute.addresses.create
-
compute.addresses.createInternal
-
compute.addresses.delete
-
compute.addresses.get
-
compute.addresses.list
-
compute.addresses.use
-
compute.addresses.useInternal
-
compute.firewalls.create
-
compute.firewalls.delete
-
compute.firewalls.get
-
compute.firewalls.list
-
compute.forwardingRules.create
-
compute.forwardingRules.get
-
compute.forwardingRules.list
-
compute.forwardingRules.setLabels
-
compute.globalAddresses.create
-
compute.globalAddresses.get
-
compute.globalAddresses.use
-
compute.globalForwardingRules.create
-
compute.globalForwardingRules.get
-
compute.globalForwardingRules.setLabels
-
compute.networks.create
-
compute.networks.get
-
compute.networks.list
-
compute.networks.updatePolicy
-
compute.networks.use
-
compute.routers.create
-
compute.routers.get
-
compute.routers.list
-
compute.routers.update
-
compute.routes.list
-
compute.subnetworks.create
-
compute.subnetworks.get
-
compute.subnetworks.list
-
compute.subnetworks.use
-
compute.subnetworks.useExternalIp
Example 12.2. Required permissions for creating load balancer resources
-
compute.backendServices.create
-
compute.backendServices.get
-
compute.backendServices.list
-
compute.backendServices.update
-
compute.backendServices.use
-
compute.regionBackendServices.create
-
compute.regionBackendServices.get
-
compute.regionBackendServices.list
-
compute.regionBackendServices.update
-
compute.regionBackendServices.use
-
compute.targetPools.addInstance
-
compute.targetPools.create
-
compute.targetPools.get
-
compute.targetPools.list
-
compute.targetPools.removeInstance
-
compute.targetPools.use
-
compute.targetTcpProxies.create
-
compute.targetTcpProxies.get
-
compute.targetTcpProxies.use
Example 12.3. Required permissions for creating DNS resources
-
dns.changes.create
-
dns.changes.get
-
dns.managedZones.create
-
dns.managedZones.get
-
dns.managedZones.list
-
dns.networks.bindPrivateDNSZone
-
dns.resourceRecordSets.create
-
dns.resourceRecordSets.list
-
dns.resourceRecordSets.update
Example 12.4. Required permissions for creating Service Account resources
-
iam.serviceAccountKeys.create
-
iam.serviceAccountKeys.delete
-
iam.serviceAccountKeys.get
-
iam.serviceAccountKeys.list
-
iam.serviceAccounts.actAs
-
iam.serviceAccounts.create
-
iam.serviceAccounts.delete
-
iam.serviceAccounts.get
-
iam.serviceAccounts.list
-
resourcemanager.projects.get
-
resourcemanager.projects.getIamPolicy
-
resourcemanager.projects.setIamPolicy
Example 12.5. Required permissions for creating compute resources
-
compute.disks.create
-
compute.disks.get
-
compute.disks.list
-
compute.instanceGroups.create
-
compute.instanceGroups.delete
-
compute.instanceGroups.get
-
compute.instanceGroups.list
-
compute.instanceGroups.update
-
compute.instanceGroups.use
-
compute.instances.create
-
compute.instances.delete
-
compute.instances.get
-
compute.instances.list
-
compute.instances.setLabels
-
compute.instances.setMetadata
-
compute.instances.setServiceAccount
-
compute.instances.setTags
-
compute.instances.use
-
compute.machineTypes.get
-
compute.machineTypes.list
Example 12.6. Required for creating storage resources
-
storage.buckets.create
-
storage.buckets.delete
-
storage.buckets.get
-
storage.buckets.list
-
storage.objects.create
-
storage.objects.delete
-
storage.objects.get
-
storage.objects.list
Example 12.7. Required permissions for creating health check resources
-
compute.healthChecks.create
-
compute.healthChecks.get
-
compute.healthChecks.list
-
compute.healthChecks.useReadOnly
-
compute.httpHealthChecks.create
-
compute.httpHealthChecks.get
-
compute.httpHealthChecks.list
-
compute.httpHealthChecks.useReadOnly
-
compute.regionHealthChecks.create
-
compute.regionHealthChecks.get
-
compute.regionHealthChecks.useReadOnly
Example 12.8. Required permissions to get GCP zone and region related information
-
compute.globalOperations.get
-
compute.regionOperations.get
-
compute.regions.get
-
compute.regions.list
-
compute.zoneOperations.get
-
compute.zones.get
-
compute.zones.list
Example 12.9. Required permissions for checking services and quotas
-
monitoring.timeSeries.list
-
serviceusage.quotas.get
-
serviceusage.services.list
Example 12.10. Required IAM permissions for installation
-
iam.roles.get
Example 12.11. Required permissions when authenticating without a service account key
-
iam.serviceAccounts.signBlob
Example 12.12. Required Images permissions for installation
-
compute.images.create
-
compute.images.delete
-
compute.images.get
-
compute.images.list
Example 12.13. Optional permission for running gather bootstrap
-
compute.instances.getSerialPortOutput
Example 12.14. Required permissions for deleting network resources
-
compute.addresses.delete
-
compute.addresses.deleteInternal
-
compute.addresses.list
-
compute.addresses.setLabels
-
compute.firewalls.delete
-
compute.firewalls.list
-
compute.forwardingRules.delete
-
compute.forwardingRules.list
-
compute.globalAddresses.delete
-
compute.globalAddresses.list
-
compute.globalForwardingRules.delete
-
compute.globalForwardingRules.list
-
compute.networks.delete
-
compute.networks.list
-
compute.networks.updatePolicy
-
compute.routers.delete
-
compute.routers.list
-
compute.routes.list
-
compute.subnetworks.delete
-
compute.subnetworks.list
Example 12.15. Required permissions for deleting load balancer resources
-
compute.backendServices.delete
-
compute.backendServices.list
-
compute.regionBackendServices.delete
-
compute.regionBackendServices.list
-
compute.targetPools.delete
-
compute.targetPools.list
-
compute.targetTcpProxies.delete
-
compute.targetTcpProxies.list
Example 12.16. Required permissions for deleting DNS resources
-
dns.changes.create
-
dns.managedZones.delete
-
dns.managedZones.get
-
dns.managedZones.list
-
dns.resourceRecordSets.delete
-
dns.resourceRecordSets.list
Example 12.17. Required permissions for deleting Service Account resources
-
iam.serviceAccounts.delete
-
iam.serviceAccounts.get
-
iam.serviceAccounts.list
-
resourcemanager.projects.getIamPolicy
-
resourcemanager.projects.setIamPolicy
Example 12.18. Required permissions for deleting compute resources
-
compute.disks.delete
-
compute.disks.list
-
compute.instanceGroups.delete
-
compute.instanceGroups.list
-
compute.instances.delete
-
compute.instances.list
-
compute.instances.stop
-
compute.machineTypes.list
Example 12.19. Required for deleting storage resources
-
storage.buckets.delete
-
storage.buckets.getIamPolicy
-
storage.buckets.list
-
storage.objects.delete
-
storage.objects.list
Example 12.20. Required permissions for deleting health check resources
-
compute.healthChecks.delete
-
compute.healthChecks.list
-
compute.httpHealthChecks.delete
-
compute.httpHealthChecks.list
-
compute.regionHealthChecks.delete
-
compute.regionHealthChecks.list
Example 12.21. Required Images permissions for deletion
-
compute.images.delete
-
compute.images.list
Example 12.22. Required permissions to get Region related information
-
compute.regions.get
Example 12.23. Required Deployment Manager permissions
-
deploymentmanager.deployments.create
-
deploymentmanager.deployments.delete
-
deploymentmanager.deployments.get
-
deploymentmanager.deployments.list
-
deploymentmanager.manifests.get
-
deploymentmanager.operations.get
-
deploymentmanager.resources.list
Additional resources
12.4.8. Supported GCP regions
You can deploy an OpenShift Container Platform cluster to the following Google Cloud Platform (GCP) regions:
-
africa-south1
(Johannesburg, South Africa) -
asia-east1
(Changhua County, Taiwan) -
asia-east2
(Hong Kong) -
asia-northeast1
(Tokyo, Japan) -
asia-northeast2
(Osaka, Japan) -
asia-northeast3
(Seoul, South Korea) -
asia-south1
(Mumbai, India) -
asia-south2
(Delhi, India) -
asia-southeast1
(Jurong West, Singapore) -
asia-southeast2
(Jakarta, Indonesia) -
australia-southeast1
(Sydney, Australia) -
australia-southeast2
(Melbourne, Australia) -
europe-central2
(Warsaw, Poland) -
europe-north1
(Hamina, Finland) -
europe-southwest1
(Madrid, Spain) -
europe-west1
(St. Ghislain, Belgium) -
europe-west2
(London, England, UK) -
europe-west3
(Frankfurt, Germany) -
europe-west4
(Eemshaven, Netherlands) -
europe-west6
(Zürich, Switzerland) -
europe-west8
(Milan, Italy) -
europe-west9
(Paris, France) -
europe-west12
(Turin, Italy) -
me-central1
(Doha, Qatar, Middle East) -
me-central2
(Dammam, Saudi Arabia, Middle East) -
me-west1
(Tel Aviv, Israel) -
northamerica-northeast1
(Montréal, Québec, Canada) -
northamerica-northeast2
(Toronto, Ontario, Canada) -
southamerica-east1
(São Paulo, Brazil) -
southamerica-west1
(Santiago, Chile) -
us-central1
(Council Bluffs, Iowa, USA) -
us-east1
(Moncks Corner, South Carolina, USA) -
us-east4
(Ashburn, Northern Virginia, USA) -
us-east5
(Columbus, Ohio) -
us-south1
(Dallas, Texas) -
us-west1
(The Dalles, Oregon, USA) -
us-west2
(Los Angeles, California, USA) -
us-west3
(Salt Lake City, Utah, USA) -
us-west4
(Las Vegas, Nevada, USA)
To determine which machine type instances are available by region and zone, see the Google documentation.
12.4.9. Installing and configuring CLI tools for GCP
To install OpenShift Container Platform on Google Cloud Platform (GCP) using user-provisioned infrastructure, you must install and configure the CLI tools for GCP.
Prerequisites
- You created a project to host your cluster.
- You created a service account and granted it the required permissions.
Procedure
Install the following binaries in
$PATH
:-
gcloud
-
gsutil
See Install the latest Cloud SDK version in the GCP documentation.
-
Authenticate using the
gcloud
tool with your configured service account.See Authorizing with a service account in the GCP documentation.
12.5. Requirements for a cluster with user-provisioned infrastructure
For a cluster that contains user-provisioned infrastructure, you must deploy all of the required machines.
This section describes the requirements for deploying OpenShift Container Platform on user-provisioned infrastructure.
12.5.1. Required machines for cluster installation
The smallest OpenShift Container Platform clusters require the following hosts:
Hosts | Description |
---|---|
One temporary bootstrap machine | The cluster requires the bootstrap machine to deploy the OpenShift Container Platform cluster on the three control plane machines. You can remove the bootstrap machine after you install the cluster. |
Three control plane machines | The control plane machines run the Kubernetes and OpenShift Container Platform services that form the control plane. |
At least two compute machines, which are also known as worker machines. | The workloads requested by OpenShift Container Platform users run on the compute machines. |
To maintain high availability of your cluster, use separate physical hosts for these cluster machines.
The bootstrap and control plane machines must use Red Hat Enterprise Linux CoreOS (RHCOS) as the operating system. However, the compute machines can choose between Red Hat Enterprise Linux CoreOS (RHCOS), Red Hat Enterprise Linux (RHEL) 8.6 and later.
Note that RHCOS is based on Red Hat Enterprise Linux (RHEL) 9.2 and inherits all of its hardware certifications and requirements. See Red Hat Enterprise Linux technology capabilities and limits.
12.5.2. Minimum resource requirements for cluster installation
Each cluster machine must meet the following minimum requirements:
Machine | Operating System | vCPU [1] | Virtual RAM | Storage | Input/Output Per Second (IOPS)[2] |
---|---|---|---|---|---|
Bootstrap | RHCOS | 4 | 16 GB | 100 GB | 300 |
Control plane | RHCOS | 4 | 16 GB | 100 GB | 300 |
Compute | RHCOS, RHEL 8.6 and later [3] | 2 | 8 GB | 100 GB | 300 |
- One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or Hyper-Threading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
- OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
- As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.
As of OpenShift Container Platform version 4.13, RHCOS is based on RHEL version 9.2, which updates the micro-architecture requirements. The following list contains the minimum instruction set architectures (ISA) that each architecture requires:
- x86-64 architecture requires x86-64-v2 ISA
- ARM64 architecture requires ARMv8.0-A ISA
- IBM Power architecture requires Power 9 ISA
- s390x architecture requires z14 ISA
For more information, see RHEL Architectures.
If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.
12.5.3. Tested instance types for GCP
The following Google Cloud Platform instance types have been tested with OpenShift Container Platform.
Example 12.24. Machine series
-
A2
-
A3
-
C2
-
C2D
-
C3
-
C3D
-
E2
-
M1
-
N1
-
N2
-
N2D
-
N4
-
Tau T2D
12.5.4. Using custom machine types
Using a custom machine type to install a OpenShift Container Platform cluster is supported.
Consider the following when using a custom machine type:
- Similar to predefined instance types, custom machine types must meet the minimum resource requirements for control plane and compute machines. For more information, see "Minimum resource requirements for cluster installation".
The name of the custom machine type must adhere to the following syntax:
custom-<number_of_cpus>-<amount_of_memory_in_mb>
For example,
custom-6-20480
.
12.6. Creating the installation files for GCP
To install OpenShift Container Platform on Google Cloud Platform (GCP) using user-provisioned infrastructure, you must generate the files that the installation program needs to deploy your cluster and modify them so that the cluster creates only the machines that it will use. You generate and customize the install-config.yaml
file, Kubernetes manifests, and Ignition config files. You also have the option to first set up a separate var
partition during the preparation phases of installation.
12.6.1. Optional: Creating a separate /var
partition
It is recommended that disk partitioning for OpenShift Container Platform be left to the installer. However, there are cases where you might want to create separate partitions in a part of the filesystem that you expect to grow.
OpenShift Container Platform supports the addition of a single partition to attach storage to either the /var
partition or a subdirectory of /var
. For example:
-
/var/lib/containers
: Holds container-related content that can grow as more images and containers are added to a system. -
/var/lib/etcd
: Holds data that you might want to keep separate for purposes such as performance optimization of etcd storage. -
/var
: Holds data that you might want to keep separate for purposes such as auditing.
Storing the contents of a /var
directory separately makes it easier to grow storage for those areas as needed and reinstall OpenShift Container Platform at a later date and keep that data intact. With this method, you will not have to pull all your containers again, nor will you have to copy massive log files when you update systems.
Because /var
must be in place before a fresh installation of Red Hat Enterprise Linux CoreOS (RHCOS), the following procedure sets up the separate /var
partition by creating a machine config manifest that is inserted during the openshift-install
preparation phases of an OpenShift Container Platform installation.
If you follow the steps to create a separate /var
partition in this procedure, it is not necessary to create the Kubernetes manifest and Ignition config files again as described later in this section.
Procedure
Create a directory to hold the OpenShift Container Platform installation files:
$ mkdir $HOME/clusterconfig
Run
openshift-install
to create a set of files in themanifest
andopenshift
subdirectories. Answer the system questions as you are prompted:$ openshift-install create manifests --dir $HOME/clusterconfig
Example output
? SSH Public Key ... INFO Credentials loaded from the "myprofile" profile in file "/home/myuser/.aws/credentials" INFO Consuming Install Config from target directory INFO Manifests created in: $HOME/clusterconfig/manifests and $HOME/clusterconfig/openshift
Optional: Confirm that the installation program created manifests in the
clusterconfig/openshift
directory:$ ls $HOME/clusterconfig/openshift/
Example output
99_kubeadmin-password-secret.yaml 99_openshift-cluster-api_master-machines-0.yaml 99_openshift-cluster-api_master-machines-1.yaml 99_openshift-cluster-api_master-machines-2.yaml ...
Create a Butane config that configures the additional partition. For example, name the file
$HOME/clusterconfig/98-var-partition.bu
, change the disk device name to the name of the storage device on theworker
systems, and set the storage size as appropriate. This example places the/var
directory on a separate partition:variant: openshift version: 4.17.0 metadata: labels: machineconfiguration.openshift.io/role: worker name: 98-var-partition storage: disks: - device: /dev/disk/by-id/<device_name> 1 partitions: - label: var start_mib: <partition_start_offset> 2 size_mib: <partition_size> 3 number: 5 filesystems: - device: /dev/disk/by-partlabel/var path: /var format: xfs mount_options: [defaults, prjquota] 4 with_mount_unit: true
- 1
- The storage device name of the disk that you want to partition.
- 2
- When adding a data partition to the boot disk, a minimum value of 25000 MiB (Mebibytes) is recommended. The root file system is automatically resized to fill all available space up to the specified offset. If no value is specified, or if the specified value is smaller than the recommended minimum, the resulting root file system will be too small, and future reinstalls of RHCOS might overwrite the beginning of the data partition.
- 3
- The size of the data partition in mebibytes.
- 4
- The
prjquota
mount option must be enabled for filesystems used for container storage.
NoteWhen creating a separate
/var
partition, you cannot use different instance types for worker nodes, if the different instance types do not have the same device name.Create a manifest from the Butane config and save it to the
clusterconfig/openshift
directory. For example, run the following command:$ butane $HOME/clusterconfig/98-var-partition.bu -o $HOME/clusterconfig/openshift/98-var-partition.yaml
Run
openshift-install
again to create Ignition configs from a set of files in themanifest
andopenshift
subdirectories:$ openshift-install create ignition-configs --dir $HOME/clusterconfig $ ls $HOME/clusterconfig/ auth bootstrap.ign master.ign metadata.json worker.ign
Now you can use the Ignition config files as input to the installation procedures to install Red Hat Enterprise Linux CoreOS (RHCOS) systems.
12.6.2. Creating the installation configuration file
You can customize the OpenShift Container Platform cluster you install on Google Cloud Platform (GCP).
Prerequisites
- You have the OpenShift Container Platform installation program and the pull secret for your cluster. For a restricted network installation, these files are on your mirror host.
-
You have the
imageContentSources
values that were generated during mirror registry creation. - You have obtained the contents of the certificate for your mirror registry.
Procedure
Create the
install-config.yaml
file.Change to the directory that contains the installation program and run the following command:
$ ./openshift-install create install-config --dir <installation_directory> 1
- 1
- For
<installation_directory>
, specify the directory name to store the files that the installation program creates.
When specifying the directory:
-
Verify that the directory has the
execute
permission. This permission is required to run Terraform binaries under the installation directory. - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
At the prompts, provide the configuration details for your cloud:
Optional: Select an SSH key to use to access your cluster machines.
NoteFor production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your
ssh-agent
process uses.- Select gcp as the platform to target.
- If you have not configured the service account key for your GCP account on your computer, you must obtain it from GCP and paste the contents of the file or enter the absolute path to the file.
- Select the project ID to provision the cluster in. The default value is specified by the service account that you configured.
- Select the region to deploy the cluster to.
- Select the base domain to deploy the cluster to. The base domain corresponds to the public DNS zone that you created for your cluster.
- Enter a descriptive name for your cluster.
Edit the
install-config.yaml
file to give the additional information that is required for an installation in a restricted network.Update the
pullSecret
value to contain the authentication information for your registry:pullSecret: '{"auths":{"<mirror_host_name>:5000": {"auth": "<credentials>","email": "you@example.com"}}}'
For
<mirror_host_name>
, specify the registry domain name that you specified in the certificate for your mirror registry, and for<credentials>
, specify the base64-encoded user name and password for your mirror registry.Add the
additionalTrustBundle
parameter and value.additionalTrustBundle: | -----BEGIN CERTIFICATE----- ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ -----END CERTIFICATE-----
The value must be the contents of the certificate file that you used for your mirror registry. The certificate file can be an existing, trusted certificate authority, or the self-signed certificate that you generated for the mirror registry.
Define the network and subnets for the VPC to install the cluster in under the parent
platform.gcp
field:network: <existing_vpc> controlPlaneSubnet: <control_plane_subnet> computeSubnet: <compute_subnet>
For
platform.gcp.network
, specify the name for the existing Google VPC. Forplatform.gcp.controlPlaneSubnet
andplatform.gcp.computeSubnet
, specify the existing subnets to deploy the control plane machines and compute machines, respectively.Add the image content resources, which resemble the following YAML excerpt:
imageContentSources: - mirrors: - <mirror_host_name>:5000/<repo_name>/release source: quay.io/openshift-release-dev/ocp-release - mirrors: - <mirror_host_name>:5000/<repo_name>/release source: registry.redhat.io/ocp/release
For these values, use the
imageContentSources
that you recorded during mirror registry creation.Optional: Set the publishing strategy to
Internal
:publish: Internal
By setting this option, you create an internal Ingress Controller and a private load balancer.
Make any other modifications to the
install-config.yaml
file that you require.For more information about the parameters, see "Installation configuration parameters".
Back up the
install-config.yaml
file so that you can use it to install multiple clusters.ImportantThe
install-config.yaml
file is consumed during the installation process. If you want to reuse the file, you must back it up now.
Additional resources
12.6.3. Enabling Shielded VMs
You can use Shielded VMs when installing your cluster. Shielded VMs have extra security features including secure boot, firmware and integrity monitoring, and rootkit detection. For more information, see Google’s documentation on Shielded VMs.
Shielded VMs are currently not supported on clusters with 64-bit ARM infrastructures.
Prerequisites
-
You have created an
install-config.yaml
file.
Procedure
Use a text editor to edit the
install-config.yaml
file prior to deploying your cluster and add one of the following stanzas:To use shielded VMs for only control plane machines:
controlPlane: platform: gcp: secureBoot: Enabled
To use shielded VMs for only compute machines:
compute: - platform: gcp: secureBoot: Enabled
To use shielded VMs for all machines:
platform: gcp: defaultMachinePlatform: secureBoot: Enabled
12.6.4. Enabling Confidential VMs
You can use Confidential VMs when installing your cluster. Confidential VMs encrypt data while it is being processed. For more information, see Google’s documentation on Confidential Computing. You can enable Confidential VMs and Shielded VMs at the same time, although they are not dependent on each other.
Confidential VMs are currently not supported on 64-bit ARM architectures.
Prerequisites
-
You have created an
install-config.yaml
file.
Procedure
Use a text editor to edit the
install-config.yaml
file prior to deploying your cluster and add one of the following stanzas:To use confidential VMs for only control plane machines:
controlPlane: platform: gcp: confidentialCompute: Enabled 1 type: n2d-standard-8 2 onHostMaintenance: Terminate 3
- 1
- Enable confidential VMs.
- 2
- Specify a machine type that supports Confidential VMs. Confidential VMs require the N2D or C2D series of machine types. For more information on supported machine types, see Supported operating systems and machine types.
- 3
- Specify the behavior of the VM during a host maintenance event, such as a hardware or software update. For a machine that uses Confidential VM, this value must be set to
Terminate
, which stops the VM. Confidential VMs do not support live VM migration.
To use confidential VMs for only compute machines:
compute: - platform: gcp: confidentialCompute: Enabled type: n2d-standard-8 onHostMaintenance: Terminate
To use confidential VMs for all machines:
platform: gcp: defaultMachinePlatform: confidentialCompute: Enabled type: n2d-standard-8 onHostMaintenance: Terminate
12.6.5. Configuring the cluster-wide proxy during installation
Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml
file.
Prerequisites
-
You have an existing
install-config.yaml
file. You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the
Proxy
object’sspec.noProxy
field to bypass the proxy if necessary.NoteThe
Proxy
objectstatus.noProxy
field is populated with the values of thenetworking.machineNetwork[].cidr
,networking.clusterNetwork[].cidr
, andnetworking.serviceNetwork[]
fields from your installation configuration.For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the
Proxy
objectstatus.noProxy
field is also populated with the instance metadata endpoint (169.254.169.254
).
Procedure
Edit your
install-config.yaml
file and add the proxy settings. For example:apiVersion: v1 baseDomain: my.domain.com proxy: httpProxy: http://<username>:<pswd>@<ip>:<port> 1 httpsProxy: https://<username>:<pswd>@<ip>:<port> 2 noProxy: example.com 3 additionalTrustBundle: | 4 -----BEGIN CERTIFICATE----- <MY_TRUSTED_CA_CERT> -----END CERTIFICATE----- additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> 5
- 1
- A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be
http
. - 2
- A proxy URL to use for creating HTTPS connections outside the cluster.
- 3
- A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with
.
to match subdomains only. For example,.y.com
matchesx.y.com
, but noty.com
. Use*
to bypass the proxy for all destinations. - 4
- If provided, the installation program generates a config map that is named
user-ca-bundle
in theopenshift-config
namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates atrusted-ca-bundle
config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in thetrustedCA
field of theProxy
object. TheadditionalTrustBundle
field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle. - 5
- Optional: The policy to determine the configuration of the
Proxy
object to reference theuser-ca-bundle
config map in thetrustedCA
field. The allowed values areProxyonly
andAlways
. UseProxyonly
to reference theuser-ca-bundle
config map only whenhttp/https
proxy is configured. UseAlways
to always reference theuser-ca-bundle
config map. The default value isProxyonly
.
NoteThe installation program does not support the proxy
readinessEndpoints
field.NoteIf the installer times out, restart and then complete the deployment by using the
wait-for
command of the installer. For example:$ ./openshift-install wait-for install-complete --log-level debug
- Save the file and reference it when installing OpenShift Container Platform.
The installation program creates a cluster-wide proxy that is named cluster
that uses the proxy settings in the provided install-config.yaml
file. If no proxy settings are provided, a cluster
Proxy
object is still created, but it will have a nil spec
.
Only the Proxy
object named cluster
is supported, and no additional proxies can be created.
12.6.6. Creating the Kubernetes manifest and Ignition config files
Because you must modify some cluster definition files and manually start the cluster machines, you must generate the Kubernetes manifest and Ignition config files that the cluster needs to configure the machines.
The installation configuration file transforms into the Kubernetes manifests. The manifests wrap into the Ignition configuration files, which are later used to configure the cluster machines.
-
The Ignition config files that the OpenShift Container Platform installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending
node-bootstrapper
certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information. - It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
Prerequisites
- You obtained the OpenShift Container Platform installation program. For a restricted network installation, these files are on your mirror host.
-
You created the
install-config.yaml
installation configuration file.
Procedure
Change to the directory that contains the OpenShift Container Platform installation program and generate the Kubernetes manifests for the cluster:
$ ./openshift-install create manifests --dir <installation_directory> 1
- 1
- For
<installation_directory>
, specify the installation directory that contains theinstall-config.yaml
file you created.
Remove the Kubernetes manifest files that define the control plane machines:
$ rm -f <installation_directory>/openshift/99_openshift-cluster-api_master-machines-*.yaml
By removing these files, you prevent the cluster from automatically generating control plane machines.
Remove the Kubernetes manifest files that define the control plane machine set:
$ rm -f <installation_directory>/openshift/99_openshift-machine-api_master-control-plane-machine-set.yaml
Optional: If you do not want the cluster to provision compute machines, remove the Kubernetes manifest files that define the worker machines:
$ rm -f <installation_directory>/openshift/99_openshift-cluster-api_worker-machineset-*.yaml
ImportantIf you disabled the
MachineAPI
capability when installing a cluster on user-provisioned infrastructure, you must remove the Kubernetes manifest files that define the worker machines. Otherwise, your cluster fails to install.Because you create and manage the worker machines yourself, you do not need to initialize these machines.
Check that the
mastersSchedulable
parameter in the<installation_directory>/manifests/cluster-scheduler-02-config.yml
Kubernetes manifest file is set tofalse
. This setting prevents pods from being scheduled on the control plane machines:-
Open the
<installation_directory>/manifests/cluster-scheduler-02-config.yml
file. -
Locate the
mastersSchedulable
parameter and ensure that it is set tofalse
. - Save and exit the file.
-
Open the
Optional: If you do not want the Ingress Operator to create DNS records on your behalf, remove the
privateZone
andpublicZone
sections from the<installation_directory>/manifests/cluster-dns-02-config.yml
DNS configuration file:apiVersion: config.openshift.io/v1 kind: DNS metadata: creationTimestamp: null name: cluster spec: baseDomain: example.openshift.com privateZone: 1 id: mycluster-100419-private-zone publicZone: 2 id: example.openshift.com status: {}
If you do so, you must add ingress DNS records manually in a later step.
To create the Ignition configuration files, run the following command from the directory that contains the installation program:
$ ./openshift-install create ignition-configs --dir <installation_directory> 1
- 1
- For
<installation_directory>
, specify the same installation directory.
Ignition config files are created for the bootstrap, control plane, and compute nodes in the installation directory. The
kubeadmin-password
andkubeconfig
files are created in the./<installation_directory>/auth
directory:. ├── auth │ ├── kubeadmin-password │ └── kubeconfig ├── bootstrap.ign ├── master.ign ├── metadata.json └── worker.ign
Additional resources
12.7. Exporting common variables
12.7.1. Extracting the infrastructure name
The Ignition config files contain a unique cluster identifier that you can use to uniquely identify your cluster in Google Cloud Platform (GCP). The infrastructure name is also used to locate the appropriate GCP resources during an OpenShift Container Platform installation. The provided Deployment Manager templates contain references to this infrastructure name, so you must extract it.
Prerequisites
- You obtained the OpenShift Container Platform installation program and the pull secret for your cluster.
- You generated the Ignition config files for your cluster.
-
You installed the
jq
package.
Procedure
To extract and view the infrastructure name from the Ignition config file metadata, run the following command:
$ jq -r .infraID <installation_directory>/metadata.json 1
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
Example output
openshift-vw9j6 1
- 1
- The output of this command is your cluster name and a random string.
12.7.2. Exporting common variables for Deployment Manager templates
You must export a common set of variables that are used with the provided Deployment Manager templates used to assist in completing a user-provided infrastructure install on Google Cloud Platform (GCP).
Specific Deployment Manager templates can also require additional exported variables, which are detailed in their related procedures.
Prerequisites
- Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
- Generate the Ignition config files for your cluster.
-
Install the
jq
package.
Procedure
Export the following common variables to be used by the provided Deployment Manager templates:
$ export BASE_DOMAIN='<base_domain>' $ export BASE_DOMAIN_ZONE_NAME='<base_domain_zone_name>' $ export NETWORK_CIDR='10.0.0.0/16' $ export MASTER_SUBNET_CIDR='10.0.0.0/17' $ export WORKER_SUBNET_CIDR='10.0.128.0/17' $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1 $ export CLUSTER_NAME=`jq -r .clusterName <installation_directory>/metadata.json` $ export INFRA_ID=`jq -r .infraID <installation_directory>/metadata.json` $ export PROJECT_NAME=`jq -r .gcp.projectID <installation_directory>/metadata.json` $ export REGION=`jq -r .gcp.region <installation_directory>/metadata.json`
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
12.8. Creating a VPC in GCP
You must create a VPC in Google Cloud Platform (GCP) for your OpenShift Container Platform cluster to use. You can customize the VPC to meet your requirements. One way to create the VPC is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your GCP infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
Procedure
-
Copy the template from the Deployment Manager template for the VPC section of this topic and save it as
01_vpc.py
on your computer. This template describes the VPC that your cluster requires. Create a
01_vpc.yaml
resource definition file:$ cat <<EOF >01_vpc.yaml imports: - path: 01_vpc.py resources: - name: cluster-vpc type: 01_vpc.py properties: infra_id: '${INFRA_ID}' 1 region: '${REGION}' 2 master_subnet_cidr: '${MASTER_SUBNET_CIDR}' 3 worker_subnet_cidr: '${WORKER_SUBNET_CIDR}' 4 EOF
- 1
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 2
region
is the region to deploy the cluster into, for exampleus-central1
.- 3
master_subnet_cidr
is the CIDR for the master subnet, for example10.0.0.0/17
.- 4
worker_subnet_cidr
is the CIDR for the worker subnet, for example10.0.128.0/17
.
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-vpc --config 01_vpc.yaml
12.8.1. Deployment Manager template for the VPC
You can use the following Deployment Manager template to deploy the VPC that you need for your OpenShift Container Platform cluster:
Example 12.25. 01_vpc.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-network', 'type': 'compute.v1.network', 'properties': { 'region': context.properties['region'], 'autoCreateSubnetworks': False } }, { 'name': context.properties['infra_id'] + '-master-subnet', 'type': 'compute.v1.subnetwork', 'properties': { 'region': context.properties['region'], 'network': '$(ref.' + context.properties['infra_id'] + '-network.selfLink)', 'ipCidrRange': context.properties['master_subnet_cidr'] } }, { 'name': context.properties['infra_id'] + '-worker-subnet', 'type': 'compute.v1.subnetwork', 'properties': { 'region': context.properties['region'], 'network': '$(ref.' + context.properties['infra_id'] + '-network.selfLink)', 'ipCidrRange': context.properties['worker_subnet_cidr'] } }, { 'name': context.properties['infra_id'] + '-router', 'type': 'compute.v1.router', 'properties': { 'region': context.properties['region'], 'network': '$(ref.' + context.properties['infra_id'] + '-network.selfLink)', 'nats': [{ 'name': context.properties['infra_id'] + '-nat-master', 'natIpAllocateOption': 'AUTO_ONLY', 'minPortsPerVm': 7168, 'sourceSubnetworkIpRangesToNat': 'LIST_OF_SUBNETWORKS', 'subnetworks': [{ 'name': '$(ref.' + context.properties['infra_id'] + '-master-subnet.selfLink)', 'sourceIpRangesToNat': ['ALL_IP_RANGES'] }] }, { 'name': context.properties['infra_id'] + '-nat-worker', 'natIpAllocateOption': 'AUTO_ONLY', 'minPortsPerVm': 512, 'sourceSubnetworkIpRangesToNat': 'LIST_OF_SUBNETWORKS', 'subnetworks': [{ 'name': '$(ref.' + context.properties['infra_id'] + '-worker-subnet.selfLink)', 'sourceIpRangesToNat': ['ALL_IP_RANGES'] }] }] } }] return {'resources': resources}
12.9. Networking requirements for user-provisioned infrastructure
All the Red Hat Enterprise Linux CoreOS (RHCOS) machines require networking to be configured in initramfs
during boot to fetch their Ignition config files.
12.9.1. Setting the cluster node hostnames through DHCP
On Red Hat Enterprise Linux CoreOS (RHCOS) machines, the hostname is set through NetworkManager. By default, the machines obtain their hostname through DHCP. If the hostname is not provided by DHCP, set statically through kernel arguments, or another method, it is obtained through a reverse DNS lookup. Reverse DNS lookup occurs after the network has been initialized on a node and can take time to resolve. Other system services can start prior to this and detect the hostname as localhost
or similar. You can avoid this by using DHCP to provide the hostname for each cluster node.
Additionally, setting the hostnames through DHCP can bypass any manual DNS record name configuration errors in environments that have a DNS split-horizon implementation.
12.9.2. Network connectivity requirements
You must configure the network connectivity between machines to allow OpenShift Container Platform cluster components to communicate. Each machine must be able to resolve the hostnames of all other machines in the cluster.
This section provides details about the ports that are required.
Protocol | Port | Description |
---|---|---|
ICMP | N/A | Network reachability tests |
TCP |
| Metrics |
|
Host level services, including the node exporter on ports | |
| The default ports that Kubernetes reserves | |
UDP |
| VXLAN |
| Geneve | |
|
Host level services, including the node exporter on ports | |
| IPsec IKE packets | |
| IPsec NAT-T packets | |
|
Network Time Protocol (NTP) on UDP port
If an external NTP time server is configured, you must open UDP port | |
TCP/UDP |
| Kubernetes node port |
ESP | N/A | IPsec Encapsulating Security Payload (ESP) |
Protocol | Port | Description |
---|---|---|
TCP |
| Kubernetes API |
Protocol | Port | Description |
---|---|---|
TCP |
| etcd server and peer ports |
12.10. Creating load balancers in GCP
You must configure load balancers in Google Cloud Platform (GCP) for your OpenShift Container Platform cluster to use. One way to create these components is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your GCP infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
Procedure
-
Copy the template from the Deployment Manager template for the internal load balancer section of this topic and save it as
02_lb_int.py
on your computer. This template describes the internal load balancing objects that your cluster requires. -
For an external cluster, also copy the template from the Deployment Manager template for the external load balancer section of this topic and save it as
02_lb_ext.py
on your computer. This template describes the external load balancing objects that your cluster requires. Export the variables that the deployment template uses:
Export the cluster network location:
$ export CLUSTER_NETWORK=(`gcloud compute networks describe ${INFRA_ID}-network --format json | jq -r .selfLink`)
Export the control plane subnet location:
$ export CONTROL_SUBNET=(`gcloud compute networks subnets describe ${INFRA_ID}-master-subnet --region=${REGION} --format json | jq -r .selfLink`)
Export the three zones that the cluster uses:
$ export ZONE_0=(`gcloud compute regions describe ${REGION} --format=json | jq -r .zones[0] | cut -d "/" -f9`)
$ export ZONE_1=(`gcloud compute regions describe ${REGION} --format=json | jq -r .zones[1] | cut -d "/" -f9`)
$ export ZONE_2=(`gcloud compute regions describe ${REGION} --format=json | jq -r .zones[2] | cut -d "/" -f9`)
Create a
02_infra.yaml
resource definition file:$ cat <<EOF >02_infra.yaml imports: - path: 02_lb_ext.py - path: 02_lb_int.py 1 resources: - name: cluster-lb-ext 2 type: 02_lb_ext.py properties: infra_id: '${INFRA_ID}' 3 region: '${REGION}' 4 - name: cluster-lb-int type: 02_lb_int.py properties: cluster_network: '${CLUSTER_NETWORK}' control_subnet: '${CONTROL_SUBNET}' 5 infra_id: '${INFRA_ID}' region: '${REGION}' zones: 6 - '${ZONE_0}' - '${ZONE_1}' - '${ZONE_2}' EOF
- 1 2
- Required only when deploying an external cluster.
- 3
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 4
region
is the region to deploy the cluster into, for exampleus-central1
.- 5
control_subnet
is the URI to the control subnet.- 6
zones
are the zones to deploy the control plane instances into, likeus-east1-b
,us-east1-c
, andus-east1-d
.
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-infra --config 02_infra.yaml
Export the cluster IP address:
$ export CLUSTER_IP=(`gcloud compute addresses describe ${INFRA_ID}-cluster-ip --region=${REGION} --format json | jq -r .address`)
For an external cluster, also export the cluster public IP address:
$ export CLUSTER_PUBLIC_IP=(`gcloud compute addresses describe ${INFRA_ID}-cluster-public-ip --region=${REGION} --format json | jq -r .address`)
12.10.1. Deployment Manager template for the external load balancer
You can use the following Deployment Manager template to deploy the external load balancer that you need for your OpenShift Container Platform cluster:
Example 12.26. 02_lb_ext.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-cluster-public-ip', 'type': 'compute.v1.address', 'properties': { 'region': context.properties['region'] } }, { # Refer to docs/dev/kube-apiserver-health-check.md on how to correctly setup health check probe for kube-apiserver 'name': context.properties['infra_id'] + '-api-http-health-check', 'type': 'compute.v1.httpHealthCheck', 'properties': { 'port': 6080, 'requestPath': '/readyz' } }, { 'name': context.properties['infra_id'] + '-api-target-pool', 'type': 'compute.v1.targetPool', 'properties': { 'region': context.properties['region'], 'healthChecks': ['$(ref.' + context.properties['infra_id'] + '-api-http-health-check.selfLink)'], 'instances': [] } }, { 'name': context.properties['infra_id'] + '-api-forwarding-rule', 'type': 'compute.v1.forwardingRule', 'properties': { 'region': context.properties['region'], 'IPAddress': '$(ref.' + context.properties['infra_id'] + '-cluster-public-ip.selfLink)', 'target': '$(ref.' + context.properties['infra_id'] + '-api-target-pool.selfLink)', 'portRange': '6443' } }] return {'resources': resources}
12.10.2. Deployment Manager template for the internal load balancer
You can use the following Deployment Manager template to deploy the internal load balancer that you need for your OpenShift Container Platform cluster:
Example 12.27. 02_lb_int.py
Deployment Manager template
def GenerateConfig(context): backends = [] for zone in context.properties['zones']: backends.append({ 'group': '$(ref.' + context.properties['infra_id'] + '-master-' + zone + '-ig' + '.selfLink)' }) resources = [{ 'name': context.properties['infra_id'] + '-cluster-ip', 'type': 'compute.v1.address', 'properties': { 'addressType': 'INTERNAL', 'region': context.properties['region'], 'subnetwork': context.properties['control_subnet'] } }, { # Refer to docs/dev/kube-apiserver-health-check.md on how to correctly setup health check probe for kube-apiserver 'name': context.properties['infra_id'] + '-api-internal-health-check', 'type': 'compute.v1.healthCheck', 'properties': { 'httpsHealthCheck': { 'port': 6443, 'requestPath': '/readyz' }, 'type': "HTTPS" } }, { 'name': context.properties['infra_id'] + '-api-internal', 'type': 'compute.v1.regionBackendService', 'properties': { 'backends': backends, 'healthChecks': ['$(ref.' + context.properties['infra_id'] + '-api-internal-health-check.selfLink)'], 'loadBalancingScheme': 'INTERNAL', 'region': context.properties['region'], 'protocol': 'TCP', 'timeoutSec': 120 } }, { 'name': context.properties['infra_id'] + '-api-internal-forwarding-rule', 'type': 'compute.v1.forwardingRule', 'properties': { 'backendService': '$(ref.' + context.properties['infra_id'] + '-api-internal.selfLink)', 'IPAddress': '$(ref.' + context.properties['infra_id'] + '-cluster-ip.selfLink)', 'loadBalancingScheme': 'INTERNAL', 'ports': ['6443','22623'], 'region': context.properties['region'], 'subnetwork': context.properties['control_subnet'] } }] for zone in context.properties['zones']: resources.append({ 'name': context.properties['infra_id'] + '-master-' + zone + '-ig', 'type': 'compute.v1.instanceGroup', 'properties': { 'namedPorts': [ { 'name': 'ignition', 'port': 22623 }, { 'name': 'https', 'port': 6443 } ], 'network': context.properties['cluster_network'], 'zone': zone } }) return {'resources': resources}
You will need this template in addition to the 02_lb_ext.py
template when you create an external cluster.
12.11. Creating a private DNS zone in GCP
You must configure a private DNS zone in Google Cloud Platform (GCP) for your OpenShift Container Platform cluster to use. One way to create this component is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your GCP infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
Procedure
-
Copy the template from the Deployment Manager template for the private DNS section of this topic and save it as
02_dns.py
on your computer. This template describes the private DNS objects that your cluster requires. Create a
02_dns.yaml
resource definition file:$ cat <<EOF >02_dns.yaml imports: - path: 02_dns.py resources: - name: cluster-dns type: 02_dns.py properties: infra_id: '${INFRA_ID}' 1 cluster_domain: '${CLUSTER_NAME}.${BASE_DOMAIN}' 2 cluster_network: '${CLUSTER_NETWORK}' 3 EOF
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-dns --config 02_dns.yaml
The templates do not create DNS entries due to limitations of Deployment Manager, so you must create them manually:
Add the internal DNS entries:
$ if [ -f transaction.yaml ]; then rm transaction.yaml; fi $ gcloud dns record-sets transaction start --zone ${INFRA_ID}-private-zone $ gcloud dns record-sets transaction add ${CLUSTER_IP} --name api.${CLUSTER_NAME}.${BASE_DOMAIN}. --ttl 60 --type A --zone ${INFRA_ID}-private-zone $ gcloud dns record-sets transaction add ${CLUSTER_IP} --name api-int.${CLUSTER_NAME}.${BASE_DOMAIN}. --ttl 60 --type A --zone ${INFRA_ID}-private-zone $ gcloud dns record-sets transaction execute --zone ${INFRA_ID}-private-zone
For an external cluster, also add the external DNS entries:
$ if [ -f transaction.yaml ]; then rm transaction.yaml; fi $ gcloud dns record-sets transaction start --zone ${BASE_DOMAIN_ZONE_NAME} $ gcloud dns record-sets transaction add ${CLUSTER_PUBLIC_IP} --name api.${CLUSTER_NAME}.${BASE_DOMAIN}. --ttl 60 --type A --zone ${BASE_DOMAIN_ZONE_NAME} $ gcloud dns record-sets transaction execute --zone ${BASE_DOMAIN_ZONE_NAME}
12.11.1. Deployment Manager template for the private DNS
You can use the following Deployment Manager template to deploy the private DNS that you need for your OpenShift Container Platform cluster:
Example 12.28. 02_dns.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-private-zone', 'type': 'dns.v1.managedZone', 'properties': { 'description': '', 'dnsName': context.properties['cluster_domain'] + '.', 'visibility': 'private', 'privateVisibilityConfig': { 'networks': [{ 'networkUrl': context.properties['cluster_network'] }] } } }] return {'resources': resources}
12.12. Creating firewall rules in GCP
You must create firewall rules in Google Cloud Platform (GCP) for your OpenShift Container Platform cluster to use. One way to create these components is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your GCP infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
Procedure
-
Copy the template from the Deployment Manager template for firewall rules section of this topic and save it as
03_firewall.py
on your computer. This template describes the security groups that your cluster requires. Create a
03_firewall.yaml
resource definition file:$ cat <<EOF >03_firewall.yaml imports: - path: 03_firewall.py resources: - name: cluster-firewall type: 03_firewall.py properties: allowed_external_cidr: '0.0.0.0/0' 1 infra_id: '${INFRA_ID}' 2 cluster_network: '${CLUSTER_NETWORK}' 3 network_cidr: '${NETWORK_CIDR}' 4 EOF
- 1
allowed_external_cidr
is the CIDR range that can access the cluster API and SSH to the bootstrap host. For an internal cluster, set this value to${NETWORK_CIDR}
.- 2
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 3
cluster_network
is theselfLink
URL to the cluster network.- 4
network_cidr
is the CIDR of the VPC network, for example10.0.0.0/16
.
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-firewall --config 03_firewall.yaml
12.12.1. Deployment Manager template for firewall rules
You can use the following Deployment Manager template to deploy the firewall rues that you need for your OpenShift Container Platform cluster:
Example 12.29. 03_firewall.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-bootstrap-in-ssh', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'tcp', 'ports': ['22'] }], 'sourceRanges': [context.properties['allowed_external_cidr']], 'targetTags': [context.properties['infra_id'] + '-bootstrap'] } }, { 'name': context.properties['infra_id'] + '-api', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'tcp', 'ports': ['6443'] }], 'sourceRanges': [context.properties['allowed_external_cidr']], 'targetTags': [context.properties['infra_id'] + '-master'] } }, { 'name': context.properties['infra_id'] + '-health-checks', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'tcp', 'ports': ['6080', '6443', '22624'] }], 'sourceRanges': ['35.191.0.0/16', '130.211.0.0/22', '209.85.152.0/22', '209.85.204.0/22'], 'targetTags': [context.properties['infra_id'] + '-master'] } }, { 'name': context.properties['infra_id'] + '-etcd', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'tcp', 'ports': ['2379-2380'] }], 'sourceTags': [context.properties['infra_id'] + '-master'], 'targetTags': [context.properties['infra_id'] + '-master'] } }, { 'name': context.properties['infra_id'] + '-control-plane', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'tcp', 'ports': ['10257'] },{ 'IPProtocol': 'tcp', 'ports': ['10259'] },{ 'IPProtocol': 'tcp', 'ports': ['22623'] }], 'sourceTags': [ context.properties['infra_id'] + '-master', context.properties['infra_id'] + '-worker' ], 'targetTags': [context.properties['infra_id'] + '-master'] } }, { 'name': context.properties['infra_id'] + '-internal-network', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'icmp' },{ 'IPProtocol': 'tcp', 'ports': ['22'] }], 'sourceRanges': [context.properties['network_cidr']], 'targetTags': [ context.properties['infra_id'] + '-master', context.properties['infra_id'] + '-worker' ] } }, { 'name': context.properties['infra_id'] + '-internal-cluster', 'type': 'compute.v1.firewall', 'properties': { 'network': context.properties['cluster_network'], 'allowed': [{ 'IPProtocol': 'udp', 'ports': ['4789', '6081'] },{ 'IPProtocol': 'udp', 'ports': ['500', '4500'] },{ 'IPProtocol': 'esp', },{ 'IPProtocol': 'tcp', 'ports': ['9000-9999'] },{ 'IPProtocol': 'udp', 'ports': ['9000-9999'] },{ 'IPProtocol': 'tcp', 'ports': ['10250'] },{ 'IPProtocol': 'tcp', 'ports': ['30000-32767'] },{ 'IPProtocol': 'udp', 'ports': ['30000-32767'] }], 'sourceTags': [ context.properties['infra_id'] + '-master', context.properties['infra_id'] + '-worker' ], 'targetTags': [ context.properties['infra_id'] + '-master', context.properties['infra_id'] + '-worker' ] } }] return {'resources': resources}
12.14. Creating the RHCOS cluster image for the GCP infrastructure
You must use a valid Red Hat Enterprise Linux CoreOS (RHCOS) image for Google Cloud Platform (GCP) for your OpenShift Container Platform nodes.
Procedure
Obtain the RHCOS image from the RHCOS image mirror page.
ImportantThe RHCOS images might not change with every release of OpenShift Container Platform. You must download an image with the highest version that is less than or equal to the OpenShift Container Platform version that you install. Use the image version that matches your OpenShift Container Platform version if it is available.
The file name contains the OpenShift Container Platform version number in the format
rhcos-<version>-<arch>-gcp.<arch>.tar.gz
.Create the Google storage bucket:
$ gsutil mb gs://<bucket_name>
Upload the RHCOS image to the Google storage bucket:
$ gsutil cp <downloaded_image_file_path>/rhcos-<version>-x86_64-gcp.x86_64.tar.gz gs://<bucket_name>
Export the uploaded RHCOS image location as a variable:
$ export IMAGE_SOURCE=gs://<bucket_name>/rhcos-<version>-x86_64-gcp.x86_64.tar.gz
Create the cluster image:
$ gcloud compute images create "${INFRA_ID}-rhcos-image" \ --source-uri="${IMAGE_SOURCE}"
12.15. Creating the bootstrap machine in GCP
You must create the bootstrap machine in Google Cloud Platform (GCP) to use during OpenShift Container Platform cluster initialization. One way to create this machine is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your bootstrap machine, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
- Create and configure networking and load balancers in GCP.
- Create control plane and compute roles.
- Ensure pyOpenSSL is installed.
Procedure
-
Copy the template from the Deployment Manager template for the bootstrap machine section of this topic and save it as
04_bootstrap.py
on your computer. This template describes the bootstrap machine that your cluster requires. Export the location of the Red Hat Enterprise Linux CoreOS (RHCOS) image that the installation program requires:
$ export CLUSTER_IMAGE=(`gcloud compute images describe ${INFRA_ID}-rhcos-image --format json | jq -r .selfLink`)
Create a bucket and upload the
bootstrap.ign
file:$ gsutil mb gs://${INFRA_ID}-bootstrap-ignition
$ gsutil cp <installation_directory>/bootstrap.ign gs://${INFRA_ID}-bootstrap-ignition/
Create a signed URL for the bootstrap instance to use to access the Ignition config. Export the URL from the output as a variable:
$ export BOOTSTRAP_IGN=`gsutil signurl -d 1h service-account-key.json gs://${INFRA_ID}-bootstrap-ignition/bootstrap.ign | grep "^gs:" | awk '{print $5}'`
Create a
04_bootstrap.yaml
resource definition file:$ cat <<EOF >04_bootstrap.yaml imports: - path: 04_bootstrap.py resources: - name: cluster-bootstrap type: 04_bootstrap.py properties: infra_id: '${INFRA_ID}' 1 region: '${REGION}' 2 zone: '${ZONE_0}' 3 cluster_network: '${CLUSTER_NETWORK}' 4 control_subnet: '${CONTROL_SUBNET}' 5 image: '${CLUSTER_IMAGE}' 6 machine_type: 'n1-standard-4' 7 root_volume_size: '128' 8 bootstrap_ign: '${BOOTSTRAP_IGN}' 9 EOF
- 1
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 2
region
is the region to deploy the cluster into, for exampleus-central1
.- 3
zone
is the zone to deploy the bootstrap instance into, for exampleus-central1-b
.- 4
cluster_network
is theselfLink
URL to the cluster network.- 5
control_subnet
is theselfLink
URL to the control subnet.- 6
image
is theselfLink
URL to the RHCOS image.- 7
machine_type
is the machine type of the instance, for examplen1-standard-4
.- 8
root_volume_size
is the boot disk size for the bootstrap machine.- 9
bootstrap_ign
is the URL output when creating a signed URL.
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-bootstrap --config 04_bootstrap.yaml
The templates do not manage load balancer membership due to limitations of Deployment Manager, so you must add the bootstrap machine manually.
Add the bootstrap instance to the internal load balancer instance group:
$ gcloud compute instance-groups unmanaged add-instances \ ${INFRA_ID}-bootstrap-ig --zone=${ZONE_0} --instances=${INFRA_ID}-bootstrap
Add the bootstrap instance group to the internal load balancer backend service:
$ gcloud compute backend-services add-backend \ ${INFRA_ID}-api-internal --region=${REGION} --instance-group=${INFRA_ID}-bootstrap-ig --instance-group-zone=${ZONE_0}
12.15.1. Deployment Manager template for the bootstrap machine
You can use the following Deployment Manager template to deploy the bootstrap machine that you need for your OpenShift Container Platform cluster:
Example 12.31. 04_bootstrap.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-bootstrap-public-ip', 'type': 'compute.v1.address', 'properties': { 'region': context.properties['region'] } }, { 'name': context.properties['infra_id'] + '-bootstrap', 'type': 'compute.v1.instance', 'properties': { 'disks': [{ 'autoDelete': True, 'boot': True, 'initializeParams': { 'diskSizeGb': context.properties['root_volume_size'], 'sourceImage': context.properties['image'] } }], 'machineType': 'zones/' + context.properties['zone'] + '/machineTypes/' + context.properties['machine_type'], 'metadata': { 'items': [{ 'key': 'user-data', 'value': '{"ignition":{"config":{"replace":{"source":"' + context.properties['bootstrap_ign'] + '"}},"version":"3.2.0"}}', }] }, 'networkInterfaces': [{ 'subnetwork': context.properties['control_subnet'], 'accessConfigs': [{ 'natIP': '$(ref.' + context.properties['infra_id'] + '-bootstrap-public-ip.address)' }] }], 'tags': { 'items': [ context.properties['infra_id'] + '-master', context.properties['infra_id'] + '-bootstrap' ] }, 'zone': context.properties['zone'] } }, { 'name': context.properties['infra_id'] + '-bootstrap-ig', 'type': 'compute.v1.instanceGroup', 'properties': { 'namedPorts': [ { 'name': 'ignition', 'port': 22623 }, { 'name': 'https', 'port': 6443 } ], 'network': context.properties['cluster_network'], 'zone': context.properties['zone'] } }] return {'resources': resources}
12.16. Creating the control plane machines in GCP
You must create the control plane machines in Google Cloud Platform (GCP) for your cluster to use. One way to create these machines is to modify the provided Deployment Manager template.
If you do not use the provided Deployment Manager template to create your control plane machines, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
- Create and configure networking and load balancers in GCP.
- Create control plane and compute roles.
- Create the bootstrap machine.
Procedure
-
Copy the template from the Deployment Manager template for control plane machines section of this topic and save it as
05_control_plane.py
on your computer. This template describes the control plane machines that your cluster requires. Export the following variable required by the resource definition:
$ export MASTER_IGNITION=`cat <installation_directory>/master.ign`
Create a
05_control_plane.yaml
resource definition file:$ cat <<EOF >05_control_plane.yaml imports: - path: 05_control_plane.py resources: - name: cluster-control-plane type: 05_control_plane.py properties: infra_id: '${INFRA_ID}' 1 zones: 2 - '${ZONE_0}' - '${ZONE_1}' - '${ZONE_2}' control_subnet: '${CONTROL_SUBNET}' 3 image: '${CLUSTER_IMAGE}' 4 machine_type: 'n1-standard-4' 5 root_volume_size: '128' service_account_email: '${MASTER_SERVICE_ACCOUNT}' 6 ignition: '${MASTER_IGNITION}' 7 EOF
- 1
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 2
zones
are the zones to deploy the control plane instances into, for exampleus-central1-a
,us-central1-b
, andus-central1-c
.- 3
control_subnet
is theselfLink
URL to the control subnet.- 4
image
is theselfLink
URL to the RHCOS image.- 5
machine_type
is the machine type of the instance, for examplen1-standard-4
.- 6
service_account_email
is the email address for the master service account that you created.- 7
ignition
is the contents of themaster.ign
file.
Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-control-plane --config 05_control_plane.yaml
The templates do not manage load balancer membership due to limitations of Deployment Manager, so you must add the control plane machines manually.
Run the following commands to add the control plane machines to the appropriate instance groups:
$ gcloud compute instance-groups unmanaged add-instances ${INFRA_ID}-master-${ZONE_0}-ig --zone=${ZONE_0} --instances=${INFRA_ID}-master-0
$ gcloud compute instance-groups unmanaged add-instances ${INFRA_ID}-master-${ZONE_1}-ig --zone=${ZONE_1} --instances=${INFRA_ID}-master-1
$ gcloud compute instance-groups unmanaged add-instances ${INFRA_ID}-master-${ZONE_2}-ig --zone=${ZONE_2} --instances=${INFRA_ID}-master-2
For an external cluster, you must also run the following commands to add the control plane machines to the target pools:
$ gcloud compute target-pools add-instances ${INFRA_ID}-api-target-pool --instances-zone="${ZONE_0}" --instances=${INFRA_ID}-master-0
$ gcloud compute target-pools add-instances ${INFRA_ID}-api-target-pool --instances-zone="${ZONE_1}" --instances=${INFRA_ID}-master-1
$ gcloud compute target-pools add-instances ${INFRA_ID}-api-target-pool --instances-zone="${ZONE_2}" --instances=${INFRA_ID}-master-2
12.16.1. Deployment Manager template for control plane machines
You can use the following Deployment Manager template to deploy the control plane machines that you need for your OpenShift Container Platform cluster:
Example 12.32. 05_control_plane.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-master-0', 'type': 'compute.v1.instance', 'properties': { 'disks': [{ 'autoDelete': True, 'boot': True, 'initializeParams': { 'diskSizeGb': context.properties['root_volume_size'], 'diskType': 'zones/' + context.properties['zones'][0] + '/diskTypes/pd-ssd', 'sourceImage': context.properties['image'] } }], 'machineType': 'zones/' + context.properties['zones'][0] + '/machineTypes/' + context.properties['machine_type'], 'metadata': { 'items': [{ 'key': 'user-data', 'value': context.properties['ignition'] }] }, 'networkInterfaces': [{ 'subnetwork': context.properties['control_subnet'] }], 'serviceAccounts': [{ 'email': context.properties['service_account_email'], 'scopes': ['https://www.googleapis.com/auth/cloud-platform'] }], 'tags': { 'items': [ context.properties['infra_id'] + '-master', ] }, 'zone': context.properties['zones'][0] } }, { 'name': context.properties['infra_id'] + '-master-1', 'type': 'compute.v1.instance', 'properties': { 'disks': [{ 'autoDelete': True, 'boot': True, 'initializeParams': { 'diskSizeGb': context.properties['root_volume_size'], 'diskType': 'zones/' + context.properties['zones'][1] + '/diskTypes/pd-ssd', 'sourceImage': context.properties['image'] } }], 'machineType': 'zones/' + context.properties['zones'][1] + '/machineTypes/' + context.properties['machine_type'], 'metadata': { 'items': [{ 'key': 'user-data', 'value': context.properties['ignition'] }] }, 'networkInterfaces': [{ 'subnetwork': context.properties['control_subnet'] }], 'serviceAccounts': [{ 'email': context.properties['service_account_email'], 'scopes': ['https://www.googleapis.com/auth/cloud-platform'] }], 'tags': { 'items': [ context.properties['infra_id'] + '-master', ] }, 'zone': context.properties['zones'][1] } }, { 'name': context.properties['infra_id'] + '-master-2', 'type': 'compute.v1.instance', 'properties': { 'disks': [{ 'autoDelete': True, 'boot': True, 'initializeParams': { 'diskSizeGb': context.properties['root_volume_size'], 'diskType': 'zones/' + context.properties['zones'][2] + '/diskTypes/pd-ssd', 'sourceImage': context.properties['image'] } }], 'machineType': 'zones/' + context.properties['zones'][2] + '/machineTypes/' + context.properties['machine_type'], 'metadata': { 'items': [{ 'key': 'user-data', 'value': context.properties['ignition'] }] }, 'networkInterfaces': [{ 'subnetwork': context.properties['control_subnet'] }], 'serviceAccounts': [{ 'email': context.properties['service_account_email'], 'scopes': ['https://www.googleapis.com/auth/cloud-platform'] }], 'tags': { 'items': [ context.properties['infra_id'] + '-master', ] }, 'zone': context.properties['zones'][2] } }] return {'resources': resources}
12.17. Wait for bootstrap completion and remove bootstrap resources in GCP
After you create all of the required infrastructure in Google Cloud Platform (GCP), wait for the bootstrap process to complete on the machines that you provisioned by using the Ignition config files that you generated with the installation program.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
- Create and configure networking and load balancers in GCP.
- Create control plane and compute roles.
- Create the bootstrap machine.
- Create the control plane machines.
Procedure
Change to the directory that contains the installation program and run the following command:
$ ./openshift-install wait-for bootstrap-complete --dir <installation_directory> \ 1 --log-level info 2
If the command exits without a
FATAL
warning, your production control plane has initialized.Delete the bootstrap resources:
$ gcloud compute backend-services remove-backend ${INFRA_ID}-api-internal --region=${REGION} --instance-group=${INFRA_ID}-bootstrap-ig --instance-group-zone=${ZONE_0}
$ gsutil rm gs://${INFRA_ID}-bootstrap-ignition/bootstrap.ign
$ gsutil rb gs://${INFRA_ID}-bootstrap-ignition
$ gcloud deployment-manager deployments delete ${INFRA_ID}-bootstrap
12.18. Creating additional worker machines in GCP
You can create worker machines in Google Cloud Platform (GCP) for your cluster to use by launching individual instances discretely or by automated processes outside the cluster, such as auto scaling groups. You can also take advantage of the built-in cluster scaling mechanisms and the machine API in OpenShift Container Platform.
In this example, you manually launch one instance by using the Deployment Manager template. Additional instances can be launched by including additional resources of type 06_worker.py
in the file.
If you do not use the provided Deployment Manager template to create your worker machines, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.
Prerequisites
- Configure a GCP account.
- Generate the Ignition config files for your cluster.
- Create and configure a VPC and associated subnets in GCP.
- Create and configure networking and load balancers in GCP.
- Create control plane and compute roles.
- Create the bootstrap machine.
- Create the control plane machines.
Procedure
-
Copy the template from the Deployment Manager template for worker machines section of this topic and save it as
06_worker.py
on your computer. This template describes the worker machines that your cluster requires. Export the variables that the resource definition uses.
Export the subnet that hosts the compute machines:
$ export COMPUTE_SUBNET=(`gcloud compute networks subnets describe ${INFRA_ID}-worker-subnet --region=${REGION} --format json | jq -r .selfLink`)
Export the email address for your service account:
$ export WORKER_SERVICE_ACCOUNT=(`gcloud iam service-accounts list --filter "email~^${INFRA_ID}-w@${PROJECT_NAME}." --format json | jq -r '.[0].email'`)
Export the location of the compute machine Ignition config file:
$ export WORKER_IGNITION=`cat <installation_directory>/worker.ign`
Create a
06_worker.yaml
resource definition file:$ cat <<EOF >06_worker.yaml imports: - path: 06_worker.py resources: - name: 'worker-0' 1 type: 06_worker.py properties: infra_id: '${INFRA_ID}' 2 zone: '${ZONE_0}' 3 compute_subnet: '${COMPUTE_SUBNET}' 4 image: '${CLUSTER_IMAGE}' 5 machine_type: 'n1-standard-4' 6 root_volume_size: '128' service_account_email: '${WORKER_SERVICE_ACCOUNT}' 7 ignition: '${WORKER_IGNITION}' 8 - name: 'worker-1' type: 06_worker.py properties: infra_id: '${INFRA_ID}' 9 zone: '${ZONE_1}' 10 compute_subnet: '${COMPUTE_SUBNET}' 11 image: '${CLUSTER_IMAGE}' 12 machine_type: 'n1-standard-4' 13 root_volume_size: '128' service_account_email: '${WORKER_SERVICE_ACCOUNT}' 14 ignition: '${WORKER_IGNITION}' 15 EOF
- 1
name
is the name of the worker machine, for exampleworker-0
.- 2 9
infra_id
is theINFRA_ID
infrastructure name from the extraction step.- 3 10
zone
is the zone to deploy the worker machine into, for exampleus-central1-a
.- 4 11
compute_subnet
is theselfLink
URL to the compute subnet.- 5 12
image
is theselfLink
URL to the RHCOS image. 1- 6 13
machine_type
is the machine type of the instance, for examplen1-standard-4
.- 7 14
service_account_email
is the email address for the worker service account that you created.- 8 15
ignition
is the contents of theworker.ign
file.
-
Optional: If you want to launch additional instances, include additional resources of type
06_worker.py
in your06_worker.yaml
resource definition file. Create the deployment by using the
gcloud
CLI:$ gcloud deployment-manager deployments create ${INFRA_ID}-worker --config 06_worker.yaml
To use a GCP Marketplace image, specify the offer to use:
-
OpenShift Container Platform:
https://www.googleapis.com/compute/v1/projects/redhat-marketplace-public/global/images/redhat-coreos-ocp-413-x86-64-202305021736
-
OpenShift Platform Plus:
https://www.googleapis.com/compute/v1/projects/redhat-marketplace-public/global/images/redhat-coreos-opp-413-x86-64-202305021736
-
OpenShift Kubernetes Engine:
https://www.googleapis.com/compute/v1/projects/redhat-marketplace-public/global/images/redhat-coreos-oke-413-x86-64-202305021736
-
OpenShift Container Platform:
12.18.1. Deployment Manager template for worker machines
You can use the following Deployment Manager template to deploy the worker machines that you need for your OpenShift Container Platform cluster:
Example 12.33. 06_worker.py
Deployment Manager template
def GenerateConfig(context): resources = [{ 'name': context.properties['infra_id'] + '-' + context.env['name'], 'type': 'compute.v1.instance', 'properties': { 'disks': [{ 'autoDelete': True, 'boot': True, 'initializeParams': { 'diskSizeGb': context.properties['root_volume_size'], 'sourceImage': context.properties['image'] } }], 'machineType': 'zones/' + context.properties['zone'] + '/machineTypes/' + context.properties['machine_type'], 'metadata': { 'items': [{ 'key': 'user-data', 'value': context.properties['ignition'] }] }, 'networkInterfaces': [{ 'subnetwork': context.properties['compute_subnet'] }], 'serviceAccounts': [{ 'email': context.properties['service_account_email'], 'scopes': ['https://www.googleapis.com/auth/cloud-platform'] }], 'tags': { 'items': [ context.properties['infra_id'] + '-worker', ] }, 'zone': context.properties['zone'] } }] return {'resources': resources}
12.19. Logging in to the cluster by using the CLI
You can log in to your cluster as a default system user by exporting the cluster kubeconfig
file. The kubeconfig
file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.
Prerequisites
- You deployed an OpenShift Container Platform cluster.
-
You installed the
oc
CLI.
Procedure
Export the
kubeadmin
credentials:$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
Verify you can run
oc
commands successfully using the exported configuration:$ oc whoami
Example output
system:admin
12.20. Disabling the default OperatorHub catalog sources
Operator catalogs that source content provided by Red Hat and community projects are configured for OperatorHub by default during an OpenShift Container Platform installation. In a restricted network environment, you must disable the default catalogs as a cluster administrator.
Procedure
Disable the sources for the default catalogs by adding
disableAllDefaultSources: true
to theOperatorHub
object:$ oc patch OperatorHub cluster --type json \ -p '[{"op": "add", "path": "/spec/disableAllDefaultSources", "value": true}]'
Alternatively, you can use the web console to manage catalog sources. From the Administration
12.21. Approving the certificate signing requests for your machines
When you add machines to a cluster, two pending certificate signing requests (CSRs) are generated for each machine that you added. You must confirm that these CSRs are approved or, if necessary, approve them yourself. The client requests must be approved first, followed by the server requests.
Prerequisites
- You added machines to your cluster.
Procedure
Confirm that the cluster recognizes the machines:
$ oc get nodes
Example output
NAME STATUS ROLES AGE VERSION master-0 Ready master 63m v1.30.3 master-1 Ready master 63m v1.30.3 master-2 Ready master 64m v1.30.3
The output lists all of the machines that you created.
NoteThe preceding output might not include the compute nodes, also known as worker nodes, until some CSRs are approved.
Review the pending CSRs and ensure that you see the client requests with the
Pending
orApproved
status for each machine that you added to the cluster:$ oc get csr
Example output
NAME AGE REQUESTOR CONDITION csr-8b2br 15m system:serviceaccount:openshift-machine-config-operator:node-bootstrapper Pending csr-8vnps 15m system:serviceaccount:openshift-machine-config-operator:node-bootstrapper Pending ...
In this example, two machines are joining the cluster. You might see more approved CSRs in the list.
If the CSRs were not approved, after all of the pending CSRs for the machines you added are in
Pending
status, approve the CSRs for your cluster machines:NoteBecause the CSRs rotate automatically, approve your CSRs within an hour of adding the machines to the cluster. If you do not approve them within an hour, the certificates will rotate, and more than two certificates will be present for each node. You must approve all of these certificates. After the client CSR is approved, the Kubelet creates a secondary CSR for the serving certificate, which requires manual approval. Then, subsequent serving certificate renewal requests are automatically approved by the
machine-approver
if the Kubelet requests a new certificate with identical parameters.NoteFor clusters running on platforms that are not machine API enabled, such as bare metal and other user-provisioned infrastructure, you must implement a method of automatically approving the kubelet serving certificate requests (CSRs). If a request is not approved, then the
oc exec
,oc rsh
, andoc logs
commands cannot succeed, because a serving certificate is required when the API server connects to the kubelet. Any operation that contacts the Kubelet endpoint requires this certificate approval to be in place. The method must watch for new CSRs, confirm that the CSR was submitted by thenode-bootstrapper
service account in thesystem:node
orsystem:admin
groups, and confirm the identity of the node.To approve them individually, run the following command for each valid CSR:
$ oc adm certificate approve <csr_name> 1
- 1
<csr_name>
is the name of a CSR from the list of current CSRs.
To approve all pending CSRs, run the following command:
$ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs --no-run-if-empty oc adm certificate approve
NoteSome Operators might not become available until some CSRs are approved.
Now that your client requests are approved, you must review the server requests for each machine that you added to the cluster:
$ oc get csr
Example output
NAME AGE REQUESTOR CONDITION csr-bfd72 5m26s system:node:ip-10-0-50-126.us-east-2.compute.internal Pending csr-c57lv 5m26s system:node:ip-10-0-95-157.us-east-2.compute.internal Pending ...
If the remaining CSRs are not approved, and are in the
Pending
status, approve the CSRs for your cluster machines:To approve them individually, run the following command for each valid CSR:
$ oc adm certificate approve <csr_name> 1
- 1
<csr_name>
is the name of a CSR from the list of current CSRs.
To approve all pending CSRs, run the following command:
$ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve
After all client and server CSRs have been approved, the machines have the
Ready
status. Verify this by running the following command:$ oc get nodes
Example output
NAME STATUS ROLES AGE VERSION master-0 Ready master 73m v1.30.3 master-1 Ready master 73m v1.30.3 master-2 Ready master 74m v1.30.3 worker-0 Ready worker 11m v1.30.3 worker-1 Ready worker 11m v1.30.3
NoteIt can take a few minutes after approval of the server CSRs for the machines to transition to the
Ready
status.
Additional information
12.22. Optional: Adding the ingress DNS records
If you removed the DNS zone configuration when creating Kubernetes manifests and generating Ignition configs, you must manually create DNS records that point at the ingress load balancer. You can create either a wildcard *.apps.{baseDomain}.
or specific records. You can use A, CNAME, and other records per your requirements.
Prerequisites
- Configure a GCP account.
- Remove the DNS Zone configuration when creating Kubernetes manifests and generating Ignition configs.
- Create and configure a VPC and associated subnets in GCP.
- Create and configure networking and load balancers in GCP.
- Create control plane and compute roles.
- Create the bootstrap machine.
- Create the control plane machines.
- Create the worker machines.
Procedure
Wait for the Ingress router to create a load balancer and populate the
EXTERNAL-IP
field:$ oc -n openshift-ingress get service router-default
Example output
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE router-default LoadBalancer 172.30.18.154 35.233.157.184 80:32288/TCP,443:31215/TCP 98
Add the A record to your zones:
To use A records:
Export the variable for the router IP address:
$ export ROUTER_IP=`oc -n openshift-ingress get service router-default --no-headers | awk '{print $4}'`
Add the A record to the private zones:
$ if [ -f transaction.yaml ]; then rm transaction.yaml; fi $ gcloud dns record-sets transaction start --zone ${INFRA_ID}-private-zone $ gcloud dns record-sets transaction add ${ROUTER_IP} --name \*.apps.${CLUSTER_NAME}.${BASE_DOMAIN}. --ttl 300 --type A --zone ${INFRA_ID}-private-zone $ gcloud dns record-sets transaction execute --zone ${INFRA_ID}-private-zone
For an external cluster, also add the A record to the public zones:
$ if [ -f transaction.yaml ]; then rm transaction.yaml; fi $ gcloud dns record-sets transaction start --zone ${BASE_DOMAIN_ZONE_NAME} $ gcloud dns record-sets transaction add ${ROUTER_IP} --name \*.apps.${CLUSTER_NAME}.${BASE_DOMAIN}. --ttl 300 --type A --zone ${BASE_DOMAIN_ZONE_NAME} $ gcloud dns record-sets transaction execute --zone ${BASE_DOMAIN_ZONE_NAME}
To add explicit domains instead of using a wildcard, create entries for each of the cluster’s current routes:
$ oc get --all-namespaces -o jsonpath='{range .items[*]}{range .status.ingress[*]}{.host}{"\n"}{end}{end}' routes
Example output
oauth-openshift.apps.your.cluster.domain.example.com console-openshift-console.apps.your.cluster.domain.example.com downloads-openshift-console.apps.your.cluster.domain.example.com alertmanager-main-openshift-monitoring.apps.your.cluster.domain.example.com prometheus-k8s-openshift-monitoring.apps.your.cluster.domain.example.com
12.23. Completing a GCP installation on user-provisioned infrastructure
After you start the OpenShift Container Platform installation on Google Cloud Platform (GCP) user-provisioned infrastructure, you can monitor the cluster events until the cluster is ready.
Prerequisites
- Deploy the bootstrap machine for an OpenShift Container Platform cluster on user-provisioned GCP infrastructure.
-
Install the
oc
CLI and log in.
Procedure
Complete the cluster installation:
$ ./openshift-install --dir <installation_directory> wait-for install-complete 1
Example output
INFO Waiting up to 30m0s for the cluster to initialize...
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
Important-
The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending
node-bootstrapper
certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information. - It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
Observe the running state of your cluster.
Run the following command to view the current cluster version and status:
$ oc get clusterversion
Example output
NAME VERSION AVAILABLE PROGRESSING SINCE STATUS version False True 24m Working towards 4.5.4: 99% complete
Run the following command to view the Operators managed on the control plane by the Cluster Version Operator (CVO):
$ oc get clusteroperators
Example output
NAME VERSION AVAILABLE PROGRESSING DEGRADED SINCE authentication 4.5.4 True False False 7m56s cloud-credential 4.5.4 True False False 31m cluster-autoscaler 4.5.4 True False False 16m console 4.5.4 True False False 10m csi-snapshot-controller 4.5.4 True False False 16m dns 4.5.4 True False False 22m etcd 4.5.4 False False False 25s image-registry 4.5.4 True False False 16m ingress 4.5.4 True False False 16m insights 4.5.4 True False False 17m kube-apiserver 4.5.4 True False False 19m kube-controller-manager 4.5.4 True False False 20m kube-scheduler 4.5.4 True False False 20m kube-storage-version-migrator 4.5.4 True False False 16m machine-api 4.5.4 True False False 22m machine-config 4.5.4 True False False 22m marketplace 4.5.4 True False False 16m monitoring 4.5.4 True False False 10m network 4.5.4 True False False 23m node-tuning 4.5.4 True False False 23m openshift-apiserver 4.5.4 True False False 17m openshift-controller-manager 4.5.4 True False False 15m openshift-samples 4.5.4 True False False 16m operator-lifecycle-manager 4.5.4 True False False 22m operator-lifecycle-manager-catalog 4.5.4 True False False 22m operator-lifecycle-manager-packageserver 4.5.4 True False False 18m service-ca 4.5.4 True False False 23m service-catalog-apiserver 4.5.4 True False False 23m service-catalog-controller-manager 4.5.4 True False False 23m storage 4.5.4 True False False 17m
Run the following command to view your cluster pods:
$ oc get pods --all-namespaces
Example output
NAMESPACE NAME READY STATUS RESTARTS AGE kube-system etcd-member-ip-10-0-3-111.us-east-2.compute.internal 1/1 Running 0 35m kube-system etcd-member-ip-10-0-3-239.us-east-2.compute.internal 1/1 Running 0 37m kube-system etcd-member-ip-10-0-3-24.us-east-2.compute.internal 1/1 Running 0 35m openshift-apiserver-operator openshift-apiserver-operator-6d6674f4f4-h7t2t 1/1 Running 1 37m openshift-apiserver apiserver-fm48r 1/1 Running 0 30m openshift-apiserver apiserver-fxkvv 1/1 Running 0 29m openshift-apiserver apiserver-q85nm 1/1 Running 0 29m ... openshift-service-ca-operator openshift-service-ca-operator-66ff6dc6cd-9r257 1/1 Running 0 37m openshift-service-ca apiservice-cabundle-injector-695b6bcbc-cl5hm 1/1 Running 0 35m openshift-service-ca configmap-cabundle-injector-8498544d7-25qn6 1/1 Running 0 35m openshift-service-ca service-serving-cert-signer-6445fc9c6-wqdqn 1/1 Running 0 35m openshift-service-catalog-apiserver-operator openshift-service-catalog-apiserver-operator-549f44668b-b5q2w 1/1 Running 0 32m openshift-service-catalog-controller-manager-operator openshift-service-catalog-controller-manager-operator-b78cr2lnm 1/1 Running 0 31m
When the current cluster version is
AVAILABLE
, the installation is complete.
12.24. Telemetry access for OpenShift Container Platform
In OpenShift Container Platform 4.17, the Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, requires internet access. If your cluster is connected to the internet, Telemetry runs automatically, and your cluster is registered to OpenShift Cluster Manager.
After you confirm that your OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually by using OpenShift Cluster Manager, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.
Additional resources
- See About remote health monitoring for more information about the Telemetry service
12.25. Next steps
- Customize your cluster.
-
Configure image streams for the Cluster Samples Operator and the
must-gather
tool. - Learn how to Use Operator Lifecycle Manager in disconnected environments.
- If the mirror registry that you used to install your cluster has a trusted CA, add it to the cluster by configuring additional trust stores.
- If necessary, you can opt out of remote health reporting.
- If necessary, see Registering your disconnected cluster