Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

15.2. Types of virtual devices

Virtualization in RHEL 10 can present several distinct types of virtual devices that you can attach to virtual machines (VMs):

Emulated devices

Emulated devices are software implementations of widely used physical devices. Drivers designed for physical devices are also compatible with emulated devices. Therefore, emulated devices can be used very flexibly.

However, because they need to faithfully emulate a particular type of hardware, emulated devices might suffer a significant performance loss compared with the corresponding physical devices or more optimized virtual devices.

The following types of emulated devices are supported:

  • Virtual CPUs (vCPUs), with a large choice of CPU models available. The performance impact of emulation depends significantly on the differences between the host CPU and the emulated vCPU.
  • Emulated system components, such as PCI bus controllers.
  • Emulated storage controllers, such as SATA, SCSI or even IDE.
  • Emulated sound devices, such as ICH9, ICH6 or AC97.
  • Emulated graphics cards, such as VGA cards.
  • Emulated network devices, such as rtl8139.
Paravirtualized devices

Paravirtualization provides a fast and efficient method for exposing virtual devices to VMs. Paravirtualized devices expose interfaces that are designed specifically for use in VMs, and thus significantly increase device performance. RHEL 10 provides paravirtualized devices to VMs by using the virtio API as a layer between the hypervisor and the VM. The drawback of this approach is that it requires a specific device driver in the guest operating system.

It is recommended to use paravirtualized devices instead of emulated devices for VM whenever possible, notably if they are running I/O intensive applications. Paravirtualized devices decrease I/O latency and increase I/O throughput, in some cases bringing them very close to bare metal performance. Other paravirtualized devices also add functionality to VMs that is not otherwise available.

The following types of paravirtualized devices are supported:

  • The paravirtualized network device (virtio-net).

  • Paravirtualized storage controllers:

    • virtio-blk - provides block device emulation.
    • virtio-scsi - provides more complete SCSI emulation.
  • The paravirtualized clock.
  • The paravirtualized serial device (virtio-serial).
  • The balloon device (virtio-balloon), used to dynamically distribute memory between a VM and its host.
  • The paravirtualized random number generator (virtio-rng).
Physically shared devices

Certain hardware platforms enable VMs to directly access various hardware devices and components. This process is known as device assignment or passthrough.

When attached in this way, some aspects of the physical device are directly available to the VM as they would be to a physical machine. This provides superior performance for the device when used in the VM. However, devices physically attached to a VM become unavailable to the host, and also cannot be migrated.

Nevertheless, some devices can be shared across multiple VMs. For example, in certain cases a single physical device can provide multiple mediated devices, which can then be assigned to distinct VMs.

The following types of passthrough devices are supported:

  • USB, PCI, and SCSI passthrough - expose common industry standard buses directly to VMs to make their specific features available to guest software.
  • Single-root I/O virtualization (SR-IOV) - a specification that enables hardware-enforced isolation of PCI Express resources. This makes it safe and efficient to partition a single physical PCI resource into virtual PCI functions. It is commonly used for network interface cards (NICs).
  • N_Port ID virtualization (NPIV) - a Fibre Channel technology to share a single physical host bus adapter (HBA) with multiple virtual ports.
  • GPUs and vGPUs - accelerators for specific kinds of graphic or compute workloads. Some GPUs can be attached directly to a VM, while certain types also offer the ability to create virtual GPUs (vGPUs) that share the underlying physical hardware.
注意

Some devices of these types might be unsupported or not compatible with RHEL. If you require assistance with setting up virtual devices, consult Red Hat support.

Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2026 Red Hat返回顶部