SupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

4.4. Smart Cards

Authentication based on smart cards is an alternative to password-based authentication. User credentials are stored on the smart card, and special software and hardware is then used to access them. In order to authenticate using a smart card, the user must place the smart card into a smart card reader and then supply the PIN code for the smart card.

Important

The following sections describe how to configure a single system for smart card authentication with local users by using the pam_pkcs11 and pam_krb5 packages. Note that these packages are now deprecated, as described in Deprecated Functionality in the 7.4 Release Notes.
To configure smart card authentication centrally, use the enhanced smart card functionality provided by the System Security Services Daemon (SSSD). For details, see Smart-card Authentication in Identity Management in the Linux Domain Identity, Authentication, and Policy Guide.

4.4.1. Configuring Smart Cards Using authconfig

Once the Enable smart card support option is selected, additional controls for configuring behavior of smart cards appear.
Smart Card Options

Figure 4.3. Smart Card Options

Note that smart card login for Red Hat Enterprise Linux servers and workstations is not enabled by default and must be enabled in the system settings.

Note

Using single sign-on when logging into Red Hat Enterprise Linux requires these packages:
  • nss-tools
  • nss-pam-ldapd
  • esc
  • pam_pkcs11
  • pam_krb5
  • opensc
  • pcsc-lite-ccid
  • gdm
  • authconfig
  • authconfig-gtk
  • krb5-libs
  • krb5-workstation
  • krb5-pkinit
  • pcsc-lite
  • pcsc-lite-libs

4.4.1.1. Enabling Smart Card Authentication from the UI

  1. Log into the system as root.
  2. Download the root CA certificates for the network in base 64 format, and install them on the server. The certificates are installed in the appropriate system database using the certutil command. For example: 
    [root@server ~]# certutil -A -d /etc/pki/nssdb -n "root CA cert" -t "CT,C,C" -i /tmp/ca_cert.crt

    Note

    Do not be concerned that the imported certificate is not displayed in the authconfig UI later during the process. You cannot see the certificate in the UI; it is obtained from the /etc/pki/nssdb/ directory during authentication.
  3. In the top menu, select the Application menu, select Sundry, and then click Authentication.
  4. Open the Advanced Options tab.
  5. Click the Enable Smart Card Support check box.
  6. There are two behaviors that can be configured for smart cards:
    • The Card removal action menu sets the response that the system takes if the smart card is removed during an active session. The Ignore option means that the system continues functioning as normal if the smart card is removed, while Lock immediately locks the screen.
    • The Require smart card for login check box sets whether a smart card is required for logins. When this option is selected, all other methods of authentication are blocked.

      Warning

      Do not select this until after you have successfully logged in using a smart card.
  7. By default, the mechanisms to check whether a certificate has been revoked (Online Certificate Status Protocol, or OCSP, responses) are disabled. To validate whether a certificate has been revoked before its expiration period, enable OCSP checking by adding the ocsp_on option to the cert_policy directive.
    1. Open the pam_pkcs11.conf file. 
      vim /etc/pam_pkcs11/pam_pkcs11.conf
    2. Change every cert_policy line so that it contains the ocsp_on option. 
      cert_policy = ca, ocsp_on, signature;

      Note

      Because of the way the file is parsed, there must be a space between cert_policy and the equals sign. Otherwise, parsing the parameter fails.
  8. If the smart card has not yet been enrolled (set up with personal certificates and keys), enroll the smart card.
  9. If the smart card is a CAC card, create the .k5login file in the CAC user's home directory. The .k5login file is required to have the Microsoft Principal Name on the CAC card.
  10. Add the following line to the /etc/pam.d/smartcard-auth and /etc/pam.d/system-auth files: 
    auth    optional    pam_krb5.so use_first_pass no_subsequent_prompt preauth_options=X509_user_identity=PKCS11:/usr/lib64/pkcs11/opensc-pkcs11.so
    If the OpenSC module does not work as expected, use the module from the coolkey package: /usr/lib64/pkcs11/libcoolkeypk11.so. In this case, consider contacting Red Hat Technical Support or filing a Bugzilla report about the problem.
  11. Configure the /etc/krb5.conf file. The settings vary depending on whether you are using a CAC card or a Gemalto 64K card.
    • With CAC cards, specify all the root certificates related to the CAC card usage in pkinit_anchors. In the following example /etc/krb5.conf file for configuring a CAC card, EXAMPLE.COM is the realm name for the CAC cards, and kdc.server.hostname.com is the KDC server host name. 
      [logging]
  default = FILE:/var/log/krb5libs.log
  kdc = FILE:/var/log/krb5kdc.log
  admin_server = FILE:/var/log/kadmind.log

[libdefaults]
  dns_lookup_realm = false
  dns_lookup_kdc = false
  ticket_lifetime = 1h
  renew_lifetime = 6h
  forwardable = true

  default_realm = EXAMPLE.COM
[realms]
  EXAMPLE.COM = {
    kdc = kdc.server.hostname.com
    admin_server = kdc.server.hostname.com
    pkinit_anchors = FILE:/etc/pki/nssdb/ca_cert.pem
    pkinit_anchors = FILE:/etc/pki/nssdb/CAC_CA_cert.pem
    pkinit_anchors = FILE:/etc/pki/nssdb/CAC_CA_email_cert.pem
    pkinit_anchors = FILE:/etc/pki/nssdb/CAC_root_ca_cert.pem
    pkinit_cert_match = CAC card specific information
  }

[domain_realm]
  EXAMPLE.COM = EXAMPLE.COM
  .EXAMPLE.COM = EXAMPLE.COM

  .kdc.server.hostname.com = EXAMPLE.COM
  kdc.server.hostname.com = EXAMPLE.COM

[appdefaults]
    pam = {
      debug = true
      ticket_lifetime = 1h
      renew_lifetime = 3h
      forwardable = true
      krb4_convert = false
      mappings = username on the CAC card     Principal name on the card
    }
    • In the following example /etc/krb5.conf file for configuring a Gemalto 64K card, EXAMPLE.COM is the realm created on the KDC server, kdc-ca.pem is the CA certificate, and kdc.server.hostname.com is the KDC server host name. 
      [logging]
  default = FILE:/var/log/krb5libs.log
  kdc = FILE:/var/log/krb5kdc.log
  admin_server = FILE:/var/log/kadmind.log

[libdefaults]
  dns_lookup_realm = false
  dns_lookup_kdc = false
  ticket_lifetime = 15m
  renew_lifetime = 6h
  forwardable = true

  default_realm = EXAMPLE.COM
[realms]
  EXAMPLE.COM = {
    kdc = kdc.server.hostname.com
    admin_server = kdc.server.hostname.com
    pkinit_anchors = FILE:/etc/pki/nssdb/kdc-ca.pem
    pkinit_cert_match = <KU>digitalSignature
    pkinit_kdc_hostname = kdc.server.hostname.com
  }

[domain_realm]
  EXAMPLE.COM = EXAMPLE.COM
  .EXAMPLE.COM = EXAMPLE.COM

  .kdc.server.hostname.com = EXAMPLE.COM
  kdc.server.hostname.com = EXAMPLE.COM

[appdefaults]
    pam = {
      debug = true
      ticket_lifetime = 1h
      renew_lifetime = 3h
      forwardable = true
      krb4_convert = false
    }

Note

When a smart card is inserted, the pklogin_finder utility, when run in debug mode, first maps the login ID to the certificates on the card and then attempts to output information about the validity of certificates: 
pklogin_finder debug
The command is useful for diagnosing problems with using a smart card to log into the system.

4.4.1.2. Configuring Smart Card Authentication from the Command Line

All that is required to use smart cards with a system is to set the --enablesmartcard option: 
[root@server ~]# authconfig --enablesmartcard --update
There are other configuration options for smart cards, such as changing the default smart card module, setting the behavior of the system when the smart card is removed, and requiring smart cards for login.
A value of 0 instructs the system to lock out a user immediately if the smart card is removed; a setting of 1 ignores it if the smart card is removed: 
[root@server ~]# authconfig --enablesmartcard --smartcardaction=0 --update
Once smart card authentication has been successfully configured and tested, then the system can be configured to require smart card authentication for users rather than simple password-based authentication. 
[root@server ~]# authconfig --enablerequiresmartcard --update

Warning

Do not use the --enablerequiresmartcard option until you have successfully authenticated to the system using a smart card. Otherwise, users may be unable to log into the system.

4.4.2. Smart Card Authentication in Identity Management

Red Hat Identity Management supports smart card authentication for IdM users. For more information, see the Smart-card Authentication in Identity Management section in the Linux Domain Identity, Authentication, and Policy Guide.
If you want to start using smart card authentication, see the hardware requirements: Smart-card support in RHEL 7.4+.
Red Hat logoGithubRedditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez leBlog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

© 2024 Red Hat, Inc.