이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 1. Post-installation cluster tasks

After installing OpenShift Container Platform, you can further expand and customize your cluster to your requirements.

1.1. Adjust worker nodes

If you incorrectly sized the worker nodes during deployment, adjust them by creating one or more new machine sets, scale them up, then scale the original machine set down before removing them.

1.1.1. Understanding the difference between machine sets and the machine config pool

MachineSet objects describe OpenShift Container Platform nodes with respect to the cloud or machine provider.

The MachineConfigPool object allows MachineConfigController components to define and provide the status of machines in the context of upgrades.

The MachineConfigPool object allows users to configure how upgrades are rolled out to the OpenShift Container Platform nodes in the machine config pool.

The NodeSelector object can be replaced with a reference to the MachineSet object.

1.1.2. Scaling a machine set manually

If you must add or remove an instance of a machine in a machine set, you can manually scale the machine set.

This guidance is relevant to fully automated, installer-provisioned infrastructure installations. Customized, user-provisioned infrastructure installations does not have machine sets.

Prerequisites

Install an OpenShift Container Platform cluster and the oc command line.
Log in to oc as a user with cluster-admin permission.

Procedure

View the machine sets that are in the cluster:
```
$ oc get machinesets -n openshift-machine-api
```
The machine sets are listed in the form of <clusterid>-worker-<aws-region-az>.

Scale the machine set:

$ oc scale --replicas=2 machineset <machineset> -n openshift-machine-api

Or:

$ oc edit machineset <machineset> -n openshift-machine-api

You can scale the machine set up or down. It takes several minutes for the new machines to be available.

1.1.3. The machine set deletion policy

Random, Newest, and Oldest are the three supported deletion options. The default is Random, meaning that random machines are chosen and deleted when scaling machine sets down. The deletion policy can be set according to the use case by modifying the particular machine set:

spec:
  deletePolicy: <delete_policy>
  replicas: <desired_replica_count>

Specific machines can also be prioritized for deletion by adding the annotation machine.openshift.io/cluster-api-delete-machine to the machine of interest, regardless of the deletion policy.

Important

By default, the OpenShift Container Platform router pods are deployed on workers. Because the router is required to access some cluster resources, including the web console, do not scale the worker machine set to 0 unless you first relocate the router pods.

Note

Custom machine sets can be used for use cases requiring that services run on specific nodes and that those services are ignored by the controller when the worker machine sets are scaling down. This prevents service disruption.

1.1.4. Creating default cluster-wide node selectors

You can use default cluster-wide node selectors on pods together with labels on nodes to constrain all pods created in a cluster to specific nodes.

With cluster-wide node selectors, when you create a pod in that cluster, OpenShift Container Platform adds the default node selectors to the pod and schedules the pod on nodes with matching labels.

You configure cluster-wide node selectors by editing the Scheduler Operator custom resource (CR). You add labels to a node, a machine set, or a machine config. Adding the label to the machine set ensures that if the node or machine goes down, new nodes have the label. Labels added to a node or machine config do not persist if the node or machine goes down.

Note

You can add additional key/value pairs to a pod. But you cannot add a different value for a default key.

Procedure

To add a default cluster-wide node selector:

Edit the Scheduler Operator CR to add the default cluster-wide node selectors:
```
$ oc edit scheduler cluster
```
Example Scheduler Operator CR with a node selector
```
apiVersion: config.openshift.io/v1
kind: Scheduler
metadata:
  name: cluster
...

spec:
  defaultNodeSelector: type=user-node,region=east 1
  mastersSchedulable: false
  policy:
    name: ""
```
1
Add a node selector with the appropriate <key>:<value> pairs.
After making this change, wait for the pods in the openshift-kube-apiserver project to redeploy. This can take several minutes. The default cluster-wide node selector does not take effect until the pods redeploy.

Add labels to a node by using a machine set or editing the node directly:

Use a machine set to add labels to nodes managed by the machine set when a node is created:

Run the following command to add labels to a MachineSet object:

$ oc patch MachineSet <name> --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"<key>"="<value>","<key>"="<value>"}}]'  -n openshift-machine-api 1

1: Add a <key>/<value> pair for each label.

For example:

$ oc patch MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"type":"user-node","region":"east"}}]'  -n openshift-machine-api

Verify that the labels are added to the MachineSet object by using the oc edit command:

For example:

$ oc edit MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

Example output

apiVersion: machine.openshift.io/v1beta1
kind: MachineSet
metadata:
...
spec:
...
  template:
    metadata:
...
    spec:
      metadata:
        labels:
          region: east
          type: user-node

Redeploy the nodes associated with that machine set by scaling down to 0 and scaling up the nodes:

For example:

$ oc scale --replicas=0 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

$ oc scale --replicas=1 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

When the nodes are ready and available, verify that the label is added to the nodes by using the oc get command:

$ oc get nodes -l <key>=<value>

For example:

$ oc get nodes -l type=user-node

Example output

NAME                                       STATUS   ROLES    AGE   VERSION
ci-ln-l8nry52-f76d1-hl7m7-worker-c-vmqzp   Ready    worker   61s   v1.18.3+002a51f

Add labels directly to a node:

Edit the Node object for the node:

$ oc label nodes <name> <key>=<value>

For example, to label a node:

$ oc label nodes ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49 type=user-node region=east

Verify that the labels are added to the node using the oc get command:

$ oc get nodes -l <key>=<value>,<key>=<value>

For example:

$ oc get nodes -l type=user-node,region=east

Example output

NAME                                       STATUS   ROLES    AGE   VERSION
ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49   Ready    worker   17m   v1.18.3+002a51f

1.2. Creating infrastructure machine sets for production environments

In a production deployment, deploy at least three machine sets to hold infrastructure components. Both the logging aggregation solution and the service mesh deploy Elasticsearch, and Elasticsearch requires three instances that are installed on different nodes. For high availability, install deploy these nodes to different availability zones. Since you need different machine sets for each availability zone, create at least three machine sets.

For sample machine sets that you can use with these procedures, see Creating machine sets for different clouds.

1.2.1. Creating a machine set

In addition to the ones created by the installation program, you can create your own machine sets to dynamically manage the machine compute resources for specific workloads of your choice.

Prerequisites

Deploy an OpenShift Container Platform cluster.
Install the OpenShift CLI (oc).
Log in to oc as a user with cluster-admin permission.

Procedure

Create a new YAML file that contains the machine set custom resource (CR) sample and is named <file_name>.yaml.

Ensure that you set the <clusterID> and <role> parameter values.

If you are not sure about which value to set for a specific field, you can check an existing machine set from your cluster.

$ oc get machinesets -n openshift-machine-api

Example output

NAME                                DESIRED   CURRENT   READY   AVAILABLE   AGE
agl030519-vplxk-worker-us-east-1a   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1b   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1c   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1d   0         0                             55m
agl030519-vplxk-worker-us-east-1e   0         0                             55m
agl030519-vplxk-worker-us-east-1f   0         0                             55m

Check values of a specific machine set:

$ oc get machineset <machineset_name> -n \
     openshift-machine-api -o yaml

Example output

...
template:
    metadata:
      labels:
        machine.openshift.io/cluster-api-cluster: agl030519-vplxk 1
        machine.openshift.io/cluster-api-machine-role: worker 2
        machine.openshift.io/cluster-api-machine-type: worker
        machine.openshift.io/cluster-api-machineset: agl030519-vplxk-worker-us-east-1a

1: The cluster ID.
2: A default node label.

Create the new MachineSet CR:
```
$ oc create -f <file_name>.yaml
```

View the list of machine sets:

$ oc get machineset -n openshift-machine-api

Example output

NAME                                DESIRED   CURRENT   READY   AVAILABLE   AGE
agl030519-vplxk-infra-us-east-1a    1         1         1       1           11m
agl030519-vplxk-worker-us-east-1a   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1b   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1c   1         1         1       1           55m
agl030519-vplxk-worker-us-east-1d   0         0                             55m
agl030519-vplxk-worker-us-east-1e   0         0                             55m
agl030519-vplxk-worker-us-east-1f   0         0                             55m

When the new machine set is available, the DESIRED and CURRENT values match. If the machine set is not available, wait a few minutes and run the command again.

1.2.2. Creating an infrastructure node

Important

See Creating infrastructure machine sets for installer-provisioned infrastructure environments or for any cluster where the master nodes are managed by the machine API.

Requirements of the cluster dictate that infrastructure, also called infra nodes, be provisioned. The installer only provides provisions for master and worker nodes. Worker nodes can be designated as infrastructure nodes or application, also called app, nodes through labeling.

Procedure

Add a label to the worker node that you want to act as application node:
```
$ oc label node <node-name> node-role.kubernetes.io/app=""
```
Add a label to the worker nodes that you want to act as infrastructure nodes:
```
$ oc label node <node-name> node-role.kubernetes.io/infra=""
```
Check to see if applicable nodes now have the infra role and app roles:
```
$ oc get nodes
```
Create a default node selector so that pods without a node selector are assigned a subset of nodes to be deployed on, for example by default deployment in worker nodes. As an example, the defaultNodeSelector to deploy pods on worker nodes by default would look like:
```
defaultNodeSelector: node-role.kubernetes.io/app=
```
Move infrastructure resources to the newly labeled infra nodes.

1.2.3. Creating a machine config pool for infrastructure machines

If you need infrastructure machines to have dedicated configurations, you must create an infra pool.

Procedure

Add a label to the node you want to assign as the infra node with a specific label:

$ oc label node <node_name> <label>

$ oc label node ci-ln-n8mqwr2-f76d1-xscn2-worker-c-6fmtx node-role.kubernetes.io/infra=

Create a machine config pool that contains both the worker role and your custom role as machine config selector:
```
$ cat infra.mcp.yaml
```
Example output
```
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfigPool
metadata:
  name: infra
spec:
  machineConfigSelector:
    matchExpressions:
      - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,infra]} 1
  nodeSelector:
    matchLabels:
      node-role.kubernetes.io/infra: "" 2
```
1
Add the worker role and your custom role.
2
Add the label you added to the node as a nodeSelector.
Note
Custom machine config pools inherit machine configs from the worker pool. Custom pools use any machine config targeted for the worker pool, but add the ability to also deploy changes that are targeted at only the custom pool. Because a custom pool inherits resources from the worker pool, any change to the worker pool also affects the custom pool.
After you have the YAML file, you can create the machine config pool:
```
$ oc create -f infra.mcp.yaml
```

Check the machine configs to ensure that the infrastructure configuration rendered successfully:

$ oc get machineconfig

Example output

NAME                                                        GENERATEDBYCONTROLLER                      IGNITIONVERSION   CREATED
00-master                                                   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
00-worker                                                   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
01-master-container-runtime                                 365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
01-master-kubelet                                           365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
01-worker-container-runtime                                 365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
01-worker-kubelet                                           365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
99-master-1ae2a1e0-a115-11e9-8f14-005056899d54-registries   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
99-master-ssh                                                                                          2.2.0             31d
99-worker-1ae64748-a115-11e9-8f14-005056899d54-registries   365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             31d
99-worker-ssh                                                                                          2.2.0             31d
rendered-infra-4e48906dca84ee702959c71a53ee80e7             365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             19s
rendered-master-072d4b2da7f88162636902b074e9e28e            5b6fb8349a29735e48446d435962dec4547d3090   2.2.0             31d
rendered-master-3e88ec72aed3886dec061df60d16d1af            02c07496ba0417b3e12b78fb32baf6293d314f79   2.2.0             31d
rendered-master-419bee7de96134963a15fdf9dd473b25            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             17d
rendered-master-53f5c91c7661708adce18739cc0f40fb            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             13d
rendered-master-a6a357ec18e5bce7f5ac426fc7c5ffcd            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             7d3h
rendered-master-dc7f874ec77fc4b969674204332da037            5b6fb8349a29735e48446d435962dec4547d3090   2.2.0             31d
rendered-worker-1a75960c52ad18ff5dfa6674eb7e533d            5b6fb8349a29735e48446d435962dec4547d3090   2.2.0             31d
rendered-worker-2640531be11ba43c61d72e82dc634ce6            5b6fb8349a29735e48446d435962dec4547d3090   2.2.0             31d
rendered-worker-4e48906dca84ee702959c71a53ee80e7            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             7d3h
rendered-worker-4f110718fe88e5f349987854a1147755            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             17d
rendered-worker-afc758e194d6188677eb837842d3b379            02c07496ba0417b3e12b78fb32baf6293d314f79   2.2.0             31d
rendered-worker-daa08cc1e8f5fcdeba24de60cd955cc3            365c1cfd14de5b0e3b85e0fc815b0060f36ab955   2.2.0             13d

You should see a new machine config, with the rendered-infra-* prefix.

Optional: To deploy changes to a custom pool, create a machine config that uses the custom pool name as the label, such as infra. Note that this is not required and only shown for instructional purposes. In this manner, you can apply any custom configurations specific to only your infra nodes.
Note
After you create the new machine config pool, the MCO generates a new rendered config for that pool, and associated nodes of that pool reboot to apply the new configuration.
1. Create a machine config:
```
$ cat infra.mc.yaml
```
  Example output
```
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  labels:
    machineconfiguration.openshift.io/role: infra 1
  name: 51-infra
spec:
  config:
    ignition:
      version: 2.2.0
    storage:
      files:
      - contents:
          source: data:,infra
        filesystem: root
        mode: 0644
        path: /etc/infratest
```
  1
  Add the label you added to the node as a nodeSelector.
2. Apply the machine config to the infra-labeled nodes:
```
$ oc create -f infra.mc.yaml
```

Confirm that your new machine config pool is available:

$ oc get mcp

Example output

NAME     CONFIG                                             UPDATED   UPDATING   DEGRADED   MACHINECOUNT   READYMACHINECOUNT   UPDATEDMACHINECOUNT   DEGRADEDMACHINECOUNT   AGE
infra    rendered-infra-60e35c2e99f42d976e084fa94da4d0fc    True      False      False      1              1                   1                     0                      4m20s
master   rendered-master-9360fdb895d4c131c7c4bebbae099c90   True      False      False      3              3                   3                     0                      91m
worker   rendered-worker-60e35c2e99f42d976e084fa94da4d0fc   True      False      False      2              2                   2                     0                      91m

In this example, a worker node was changed to an infra node.

Additional resources

See Node configuration management with machine config pools for more information on grouping infra machines in a custom pool.

1.3. Assigning machine set resources to infrastructure nodes

After creating an infrastructure machine set, the worker and infra roles are applied to new infra nodes. Nodes with the infra role are not counted toward the total number of subscriptions that are required to run the environment, even when the worker role is also applied.

However, when an infra node is assigned the worker role, there is a chance that user workloads can get assigned inadvertently to the infra node. To avoid this, you can apply a taint to the infra node and tolerations for the pods that you want to control.

1.3.1. Binding infrastructure node workloads using taints and tolerations

If you have an infra node that has the infra and worker roles assigned, you must configure the node so that user workloads are not assigned to it.

Important

It is recommended that you preserve the dual infra,worker label that is created for infra nodes and use taints and tolerations to manage nodes that user workloads are scheduled on. If you remove the worker label from the node, you must create a custom pool to manage it. A node with a label other than master or worker is not recognized by the MCO without a custom pool. Maintaining the worker label allows the node to be managed by the default worker machine config pool, if no custom pools that select the custom label exists. The infra label communicates to the cluster that it does not count toward the total number of subscriptions.

Prerequisites

Configure additional MachineSet objects in your OpenShift Container Platform cluster.

Procedure

Add a taint to the infra node to prevent scheduling user workloads on it:
1. Determine if the node has the taint:
```
$ oc describe nodes <node_name>
```
  Sample output
```
oc describe node ci-ln-iyhx092-f76d1-nvdfm-worker-b-wln2l
Name:               ci-ln-iyhx092-f76d1-nvdfm-worker-b-wln2l
Roles:              worker
 ...
Taints:             node-role.kubernetes.io/infra:NoSchedule
 ...
```
  This example shows that the node has a taint. You can proceed with adding a toleration to your pod in the next step.
2. If you have not configured a taint to prevent scheduling user workloads on it:
```
$ oc adm taint nodes <node_name> <key>:<effect>
```
  For example:
```
$ oc adm taint nodes node1 node-role.kubernetes.io/infra:NoSchedule
```
  This example places a taint on node1 that has key node-role.kubernetes.io/infra and taint effect NoSchedule. Nodes with the NoSchedule effect schedule only pods that tolerate the taint, but allow existing pods to remain scheduled on the node.
  Note
  If a descheduler is used, pods violating node taints could be evicted from the cluster.
Add tolerations for the pod configurations you want to schedule on the infra node, like router, registry, and monitoring workloads. Add the following code to the Pod object specification:
```
tolerations:
  - effect: NoSchedule 1
    key: node-role.kubernetes.io/infra 2
    operator: Exists 3
```
1
Specify the effect that you added to the node.
2
Specify the key that you added to the node.
3
Specify the Exists Operator to require a taint with the key node-role.kubernetes.io/infra to be present on the node.
This toleration matches the taint created by the oc adm taint command. A pod with this toleration can be scheduled onto the infra node.
Note
Moving pods for an Operator installed via OLM to an infra node is not always possible. The capability to move Operator pods depends on the configuration of each Operator.
Schedule the pod to the infra node using a scheduler. See the documentation for Controlling pod placement onto nodes for details.

Additional resources

See Controlling pod placement using the scheduler for general information on scheduling a pod to a node.

1.4. Moving resources to infrastructure machine sets

Some of the infrastructure resources are deployed in your cluster by default. You can move them to the infrastructure machine sets that you created.

1.4.1. Moving the router

You can deploy the router pod to a different machine set. By default, the pod is deployed to a worker node.

Prerequisites

Configure additional machine sets in your OpenShift Container Platform cluster.

Procedure

View the IngressController custom resource for the router Operator:

$ oc get ingresscontroller default -n openshift-ingress-operator -o yaml

The command output resembles the following text:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: 2019-04-18T12:35:39Z
  finalizers:
  - ingresscontroller.operator.openshift.io/finalizer-ingresscontroller
  generation: 1
  name: default
  namespace: openshift-ingress-operator
  resourceVersion: "11341"
  selfLink: /apis/operator.openshift.io/v1/namespaces/openshift-ingress-operator/ingresscontrollers/default
  uid: 79509e05-61d6-11e9-bc55-02ce4781844a
spec: {}
status:
  availableReplicas: 2
  conditions:
  - lastTransitionTime: 2019-04-18T12:36:15Z
    status: "True"
    type: Available
  domain: apps.<cluster>.example.com
  endpointPublishingStrategy:
    type: LoadBalancerService
  selector: ingresscontroller.operator.openshift.io/deployment-ingresscontroller=default

Edit the ingresscontroller resource and change the nodeSelector to use the infra label:

$ oc edit ingresscontroller default -n openshift-ingress-operator

Add the nodeSelector stanza that references the infra label to the spec section, as shown:

  spec:
    nodePlacement:
      nodeSelector:
        matchLabels:
          node-role.kubernetes.io/infra: ""

Confirm that the router pod is running on the infra node.

View the list of router pods and note the node name of the running pod:

$ oc get pod -n openshift-ingress -o wide

Example output

NAME                              READY     STATUS        RESTARTS   AGE       IP           NODE                           NOMINATED NODE   READINESS GATES
router-default-86798b4b5d-bdlvd   1/1      Running       0          28s       10.130.2.4   ip-10-0-217-226.ec2.internal   <none>           <none>
router-default-955d875f4-255g8    0/1      Terminating   0          19h       10.129.2.4   ip-10-0-148-172.ec2.internal   <none>           <none>

In this example, the running pod is on the ip-10-0-217-226.ec2.internal node.

View the node status of the running pod:
```
$ oc get node <node_name> 1
```
1
Specify the <node_name> that you obtained from the pod list.
Example output
```
NAME                          STATUS  ROLES         AGE   VERSION
ip-10-0-217-226.ec2.internal  Ready   infra,worker  17h   v1.18.3
```
Because the role list includes infra, the pod is running on the correct node.

1.4.2. Moving the default registry

You configure the registry Operator to deploy its pods to different nodes.

Prerequisites

Configure additional machine sets in your OpenShift Container Platform cluster.

Procedure

View the config/instance object:

$ oc get configs.imageregistry.operator.openshift.io/cluster -o yaml

Example output

apiVersion: imageregistry.operator.openshift.io/v1
kind: Config
metadata:
  creationTimestamp: 2019-02-05T13:52:05Z
  finalizers:
  - imageregistry.operator.openshift.io/finalizer
  generation: 1
  name: cluster
  resourceVersion: "56174"
  selfLink: /apis/imageregistry.operator.openshift.io/v1/configs/cluster
  uid: 36fd3724-294d-11e9-a524-12ffeee2931b
spec:
  httpSecret: d9a012ccd117b1e6616ceccb2c3bb66a5fed1b5e481623
  logging: 2
  managementState: Managed
  proxy: {}
  replicas: 1
  requests:
    read: {}
    write: {}
  storage:
    s3:
      bucket: image-registry-us-east-1-c92e88cad85b48ec8b312344dff03c82-392c
      region: us-east-1
status:
...

Edit the config/instance object:

$ oc edit configs.imageregistry.operator.openshift.io/cluster

Add the following lines of text the spec section of the object:
```
  nodeSelector:
    node-role.kubernetes.io/infra: ""
```
Verify the registry pod has been moved to the infrastructure node.
1. Run the following command to identify the node where the registry pod is located:
```
$ oc get pods -o wide -n openshift-image-registry
```
2. Confirm the node has the label you specified:
```
$ oc describe node <node_name>
```
  Review the command output and confirm that node-role.kubernetes.io/infra is in the LABELS list.

1.4.3. Moving the monitoring solution

By default, the Prometheus Cluster Monitoring stack, which contains Prometheus, Grafana, and AlertManager, is deployed to provide cluster monitoring. It is managed by the Cluster Monitoring Operator. To move its components to different machines, you create and apply a custom config map.

Procedure

Save the following ConfigMap definition as the cluster-monitoring-configmap.yaml file:

apiVersion: v1
kind: ConfigMap
metadata:
  name: cluster-monitoring-config
  namespace: openshift-monitoring
data:
  config.yaml: |+
    alertmanagerMain:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    prometheusK8s:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    prometheusOperator:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    grafana:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    k8sPrometheusAdapter:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    kubeStateMetrics:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    telemeterClient:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    openshiftStateMetrics:
      nodeSelector:
        node-role.kubernetes.io/infra: ""
    thanosQuerier:
      nodeSelector:
        node-role.kubernetes.io/infra: ""

Running this config map forces the components of the monitoring stack to redeploy to infrastructure nodes.

Apply the new config map:

$ oc create -f cluster-monitoring-configmap.yaml

Watch the monitoring pods move to the new machines:

$ watch 'oc get pod -n openshift-monitoring -o wide'

If a component has not moved to the infra node, delete the pod with this component:
```
$ oc delete pod -n openshift-monitoring <pod>
```
The component from the deleted pod is re-created on the infra node.

1.4.4. Moving the cluster logging resources

You can configure the Cluster Logging Operator to deploy the pods for any or all of the Cluster Logging components, Elasticsearch, Kibana, and Curator to different nodes. You cannot move the Cluster Logging Operator pod from its installed location.

For example, you can move the Elasticsearch pods to a separate node because of high CPU, memory, and disk requirements.

Prerequisites

Cluster logging and Elasticsearch must be installed. These features are not installed by default.

Procedure

Edit the ClusterLogging custom resource (CR) in the openshift-logging project:

$ oc edit ClusterLogging instance

apiVersion: logging.openshift.io/v1
kind: ClusterLogging

...

spec:
  collection:
    logs:
      fluentd:
        resources: null
      type: fluentd
  curation:
    curator:
      nodeSelector: 1
        node-role.kubernetes.io/infra: ''
      resources: null
      schedule: 30 3 * * *
    type: curator
  logStore:
    elasticsearch:
      nodeCount: 3
      nodeSelector: 2
        node-role.kubernetes.io/infra: ''
      redundancyPolicy: SingleRedundancy
      resources:
        limits:
          cpu: 500m
          memory: 16Gi
        requests:
          cpu: 500m
          memory: 16Gi
      storage: {}
    type: elasticsearch
  managementState: Managed
  visualization:
    kibana:
      nodeSelector: 3
        node-role.kubernetes.io/infra: ''
      proxy:
        resources: null
      replicas: 1
      resources: null
    type: kibana

...

1 2 3: Add a nodeSelector parameter with the appropriate value to the component you want to move. You can use a nodeSelector in the format shown or use <key>: <value> pairs, based on the value specified for the node.

Verification

To verify that a component has moved, you can use the oc get pod -o wide command.

For example:

You want to move the Kibana pod from the ip-10-0-147-79.us-east-2.compute.internal node:

$ oc get pod kibana-5b8bdf44f9-ccpq9 -o wide

Example output

NAME                      READY   STATUS    RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
kibana-5b8bdf44f9-ccpq9   2/2     Running   0          27s   10.129.2.18   ip-10-0-147-79.us-east-2.compute.internal   <none>           <none>

You want to move the Kibana Pod to the ip-10-0-139-48.us-east-2.compute.internal node, a dedicated infrastructure node:

$ oc get nodes

Example output

NAME                                         STATUS   ROLES          AGE   VERSION
ip-10-0-133-216.us-east-2.compute.internal   Ready    master         60m   v1.18.3
ip-10-0-139-146.us-east-2.compute.internal   Ready    master         60m   v1.18.3
ip-10-0-139-192.us-east-2.compute.internal   Ready    worker         51m   v1.18.3
ip-10-0-139-241.us-east-2.compute.internal   Ready    worker         51m   v1.18.3
ip-10-0-147-79.us-east-2.compute.internal    Ready    worker         51m   v1.18.3
ip-10-0-152-241.us-east-2.compute.internal   Ready    master         60m   v1.18.3
ip-10-0-139-48.us-east-2.compute.internal    Ready    infra          51m   v1.18.3

Note that the node has a node-role.kubernetes.io/infra: '' label:

$ oc get node ip-10-0-139-48.us-east-2.compute.internal -o yaml

Example output

kind: Node
apiVersion: v1
metadata:
  name: ip-10-0-139-48.us-east-2.compute.internal
  selfLink: /api/v1/nodes/ip-10-0-139-48.us-east-2.compute.internal
  uid: 62038aa9-661f-41d7-ba93-b5f1b6ef8751
  resourceVersion: '39083'
  creationTimestamp: '2020-04-13T19:07:55Z'
  labels:
    node-role.kubernetes.io/infra: ''
...

To move the Kibana pod, edit the ClusterLogging CR to add a node selector:

apiVersion: logging.openshift.io/v1
kind: ClusterLogging

...

spec:

...

  visualization:
    kibana:
      nodeSelector: 1
        node-role.kubernetes.io/infra: ''
      proxy:
        resources: null
      replicas: 1
      resources: null
    type: kibana

1: Add a node selector to match the label in the node specification.

After you save the CR, the current Kibana pod is terminated and new pod is deployed:

$ oc get pods

Example output

NAME                                            READY   STATUS        RESTARTS   AGE
cluster-logging-operator-84d98649c4-zb9g7       1/1     Running       0          29m
elasticsearch-cdm-hwv01pf7-1-56588f554f-kpmlg   2/2     Running       0          28m
elasticsearch-cdm-hwv01pf7-2-84c877d75d-75wqj   2/2     Running       0          28m
elasticsearch-cdm-hwv01pf7-3-f5d95b87b-4nx78    2/2     Running       0          28m
fluentd-42dzz                                   1/1     Running       0          28m
fluentd-d74rq                                   1/1     Running       0          28m
fluentd-m5vr9                                   1/1     Running       0          28m
fluentd-nkxl7                                   1/1     Running       0          28m
fluentd-pdvqb                                   1/1     Running       0          28m
fluentd-tflh6                                   1/1     Running       0          28m
kibana-5b8bdf44f9-ccpq9                         2/2     Terminating   0          4m11s
kibana-7d85dcffc8-bfpfp                         2/2     Running       0          33s

The new pod is on the ip-10-0-139-48.us-east-2.compute.internal node:

$ oc get pod kibana-7d85dcffc8-bfpfp -o wide

Example output

NAME                      READY   STATUS        RESTARTS   AGE   IP            NODE                                        NOMINATED NODE   READINESS GATES
kibana-7d85dcffc8-bfpfp   2/2     Running       0          43s   10.131.0.22   ip-10-0-139-48.us-east-2.compute.internal   <none>           <none>

After a few moments, the original Kibana pod is removed.

$ oc get pods

Example output

NAME                                            READY   STATUS    RESTARTS   AGE
cluster-logging-operator-84d98649c4-zb9g7       1/1     Running   0          30m
elasticsearch-cdm-hwv01pf7-1-56588f554f-kpmlg   2/2     Running   0          29m
elasticsearch-cdm-hwv01pf7-2-84c877d75d-75wqj   2/2     Running   0          29m
elasticsearch-cdm-hwv01pf7-3-f5d95b87b-4nx78    2/2     Running   0          29m
fluentd-42dzz                                   1/1     Running   0          29m
fluentd-d74rq                                   1/1     Running   0          29m
fluentd-m5vr9                                   1/1     Running   0          29m
fluentd-nkxl7                                   1/1     Running   0          29m
fluentd-pdvqb                                   1/1     Running   0          29m
fluentd-tflh6                                   1/1     Running   0          29m
kibana-7d85dcffc8-bfpfp                         2/2     Running   0          62s

1.5. About the cluster autoscaler

The cluster autoscaler adjusts the size of an OpenShift Container Platform cluster to meet its current deployment needs. It uses declarative, Kubernetes-style arguments to provide infrastructure management that does not rely on objects of a specific cloud provider. The cluster autoscaler has a cluster scope, and is not associated with a particular namespace.

The cluster autoscaler increases the size of the cluster when there are pods that failed to schedule on any of the current nodes due to insufficient resources or when another node is necessary to meet deployment needs. The cluster autoscaler does not increase the cluster resources beyond the limits that you specify.

Important

Ensure that the maxNodesTotal value in the ClusterAutoscaler resource definition that you create is large enough to account for the total possible number of machines in your cluster. This value must encompass the number of control plane machines and the possible number of compute machines that you might scale to.

The cluster autoscaler decreases the size of the cluster when some nodes are consistently not needed for a significant period, such as when it has low resource use and all of its important pods can fit on other nodes.

If the following types of pods are present on a node, the cluster autoscaler will not remove the node:

Pods with restrictive pod disruption budgets (PDBs).
Kube-system pods that do not run on the node by default.
Kube-system pods that do not have a PDB or have a PDB that is too restrictive.
Pods that are not backed by a controller object such as a deployment, replica set, or stateful set.
Pods with local storage.
Pods that cannot be moved elsewhere because of a lack of resources, incompatible node selectors or affinity, matching anti-affinity, and so on.
Unless they also have a "cluster-autoscaler.kubernetes.io/safe-to-evict": "true" annotation, pods that have a "cluster-autoscaler.kubernetes.io/safe-to-evict": "false" annotation.

If you configure the cluster autoscaler, additional usage restrictions apply:

Do not modify the nodes that are in autoscaled node groups directly. All nodes within the same node group have the same capacity and labels and run the same system pods.
Specify requests for your pods.
If you have to prevent pods from being deleted too quickly, configure appropriate PDBs.
Confirm that your cloud provider quota is large enough to support the maximum node pools that you configure.
Do not run additional node group autoscalers, especially the ones offered by your cloud provider.

The horizontal pod autoscaler (HPA) and the cluster autoscaler modify cluster resources in different ways. The HPA changes the deployment’s or replica set’s number of replicas based on the current CPU load. If the load increases, the HPA creates new replicas, regardless of the amount of resources available to the cluster. If there are not enough resources, the cluster autoscaler adds resources so that the HPA-created pods can run. If the load decreases, the HPA stops some replicas. If this action causes some nodes to be underutilized or completely empty, the cluster autoscaler deletes the unnecessary nodes.

The cluster autoscaler takes pod priorities into account. The Pod Priority and Preemption feature enables scheduling pods based on priorities if the cluster does not have enough resources, but the cluster autoscaler ensures that the cluster has resources to run all pods. To honor the intention of both features, the cluster autoscaler includes a priority cutoff function. You can use this cutoff to schedule "best-effort" pods, which do not cause the cluster autoscaler to increase resources but instead run only when spare resources are available.

Pods with priority lower than the cutoff value do not cause the cluster to scale up or prevent the cluster from scaling down. No new nodes are added to run the pods, and nodes running these pods might be deleted to free resources.

1.5.1. ClusterAutoscaler resource definition

This ClusterAutoscaler resource definition shows the parameters and sample values for the cluster autoscaler.

apiVersion: "autoscaling.openshift.io/v1"
kind: "ClusterAutoscaler"
metadata:
  name: "default"
spec:
  podPriorityThreshold: -10 1
  resourceLimits:
    maxNodesTotal: 24 2
    cores:
      min: 8 3
      max: 128 4
    memory:
      min: 4 5
      max: 256 6
    gpus:
      - type: nvidia.com/gpu 7
        min: 0 8
        max: 16 9
      - type: amd.com/gpu 10
        min: 0 11
        max: 4 12
  scaleDown: 13
    enabled: true 14
    delayAfterAdd: 10m 15
    delayAfterDelete: 5m 16
    delayAfterFailure: 30s 17
    unneededTime: 5m 18

1: Specify the priority that a pod must exceed to cause the cluster autoscaler to deploy additional nodes. Enter a 32-bit integer value. The podPriorityThreshold value is compared to the value of the PriorityClass that you assign to each pod.
2: Specify the maximum number of nodes to deploy. This value is the total number of machines that are deployed in your cluster, not just the ones that the autoscaler controls. Ensure that this value is large enough to account for all of your control plane and compute machines and the total number of replicas that you specify in your MachineAutoscaler resources.
3: Specify the minimum number of cores to deploy in the cluster.
4: Specify the maximum number of cores to deploy in the cluster.
5: Specify the minimum amount of memory, in GiB, in the cluster.
6: Specify the maximum amount of memory, in GiB, in the cluster.
7 10: Optionally, specify the type of GPU node to deploy. Only nvidia.com/gpu and amd.com/gpu are valid types.
8 11: Specify the minimum number of GPUs to deploy in the cluster.
9 12: Specify the maximum number of GPUs to deploy in the cluster.
13: In this section, you can specify the period to wait for each action by using any valid ParseDuration interval, including ns, us, ms, s, m, and h.
14: Specify whether the cluster autoscaler can remove unnecessary nodes.
15: Optionally, specify the period to wait before deleting a node after a node has recently been added. If you do not specify a value, the default value of 10m is used.
16: Specify the period to wait before deleting a node after a node has recently been deleted. If you do not specify a value, the default value of 10s is used.
17: Specify the period to wait before deleting a node after a scale down failure occurred. If you do not specify a value, the default value of 3m is used.
18: Specify the period before an unnecessary node is eligible for deletion. If you do not specify a value, the default value of 10m is used.

Note

When performing a scaling operation, the cluster autoscaler remains within the ranges set in the ClusterAutoscaler resource definition, such as the minimum and maximum number of cores to deploy or the amount of memory in the cluster. However, the cluster autoscaler does not correct the current values in your cluster to be within those ranges.

1.5.2. Deploying the cluster autoscaler

To deploy the cluster autoscaler, you create an instance of the ClusterAutoscaler resource.

Procedure

Create a YAML file for the ClusterAutoscaler resource that contains the customized resource definition.
Create the resource in the cluster:
```
$ oc create -f <filename>.yaml 1
```
1
<filename> is the name of the resource file that you customized.

1.6. About the machine autoscaler

The machine autoscaler adjusts the number of Machines in the machine sets that you deploy in an OpenShift Container Platform cluster. You can scale both the default worker machine set and any other machine sets that you create. The machine autoscaler makes more Machines when the cluster runs out of resources to support more deployments. Any changes to the values in MachineAutoscaler resources, such as the minimum or maximum number of instances, are immediately applied to the machine set they target.

Important

You must deploy a machine autoscaler for the cluster autoscaler to scale your machines. The cluster autoscaler uses the annotations on machine sets that the machine autoscaler sets to determine the resources that it can scale. If you define a cluster autoscaler without also defining machine autoscalers, the cluster autoscaler will never scale your cluster.

1.6.1. MachineAutoscaler resource definition

This MachineAutoscaler resource definition shows the parameters and sample values for the machine autoscaler.

apiVersion: "autoscaling.openshift.io/v1beta1"
kind: "MachineAutoscaler"
metadata:
  name: "worker-us-east-1a" 1
  namespace: "openshift-machine-api"
spec:
  minReplicas: 1 2
  maxReplicas: 12 3
  scaleTargetRef: 4
    apiVersion: machine.openshift.io/v1beta1
    kind: MachineSet 5
    name: worker-us-east-1a 6

1: Specify the machine autoscaler name. To make it easier to identify which machine set this machine autoscaler scales, specify or include the name of the machine set to scale. The machine set name takes the following form: <clusterid>-<machineset>-<aws-region-az>
2: Specify the minimum number machines of the specified type that must remain in the specified zone after the cluster autoscaler initiates cluster scaling. If running in AWS, GCP, or Azure, this value can be set to 0. For other providers, do not set this value to 0.
3: Specify the maximum number machines of the specified type that the cluster autoscaler can deploy in the specified AWS zone after it initiates cluster scaling. Ensure that the maxNodesTotal value in the ClusterAutoscaler resource definition is large enough to allow the machine autoscaler to deploy this number of machines.
4: In this section, provide values that describe the existing machine set to scale.
5: The kind parameter value is always MachineSet.
6: The name value must match the name of an existing machine set, as shown in the metadata.name parameter value.

1.6.2. Deploying the machine autoscaler

To deploy the machine autoscaler, you create an instance of the MachineAutoscaler resource.

Procedure

Create a YAML file for the MachineAutoscaler resource that contains the customized resource definition.
Create the resource in the cluster:
```
$ oc create -f <filename>.yaml 1
```
1
<filename> is the name of the resource file that you customized.

1.7. Enabling Technology Preview features using FeatureGates

You can turn on a subset of the current Technology Preview features on for all nodes in the cluster by editing the FeatureGate custom resource (CR).

1.8. etcd tasks

Back up etcd, enable or disable etcd encryption, or defragment etcd data.

1.8.1. About etcd encryption

By default, etcd data is not encrypted in OpenShift Container Platform. You can enable etcd encryption for your cluster to provide an additional layer of data security. For example, it can help protect the loss of sensitive data if an etcd backup is exposed to the incorrect parties.

When you enable etcd encryption, the following OpenShift API server and Kubernetes API server resources are encrypted:

Secrets
Config maps
Routes
OAuth access tokens
OAuth authorize tokens

When you enable etcd encryption, encryption keys are created. These keys are rotated on a weekly basis. You must have these keys in order to restore from an etcd backup.

1.8.2. Enabling etcd encryption

You can enable etcd encryption to encrypt sensitive resources in your cluster.

Warning

It is not recommended to take a backup of etcd until the initial encryption process is complete. If the encryption process has not completed, the backup might be only partially encrypted.

Prerequisites

Access to the cluster as a user with the cluster-admin role.

Procedure

Modify the APIServer object:
```
$ oc edit apiserver
```
Set the encryption field type to aescbc:
```
spec:
  encryption:
    type: aescbc 1
```
1
The aescbc type means that AES-CBC with PKCS#7 padding and a 32 byte key is used to perform the encryption.
Save the file to apply the changes.
The encryption process starts. It can take 20 minutes or longer for this process to complete, depending on the size of your cluster.
Verify that etcd encryption was successful.
1. Review the Encrypted status condition for the OpenShift API server to verify that its resources were successfully encrypted:
```
$ oc get openshiftapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'
```
  The output shows EncryptionCompleted upon successful encryption:
```
EncryptionCompleted
All resources encrypted: routes.route.openshift.io, oauthaccesstokens.oauth.openshift.io, oauthauthorizetokens.oauth.openshift.io
```
  If the output shows EncryptionInProgress, this means that encryption is still in progress. Wait a few minutes and try again.
2. Review the Encrypted status condition for the Kubernetes API server to verify that its resources were successfully encrypted:
```
$ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'
```
  The output shows EncryptionCompleted upon successful encryption:
```
EncryptionCompleted
All resources encrypted: secrets, configmaps
```
  If the output shows EncryptionInProgress, this means that encryption is still in progress. Wait a few minutes and try again.

1.8.3. Disabling etcd encryption

You can disable encryption of etcd data in your cluster.

Prerequisites

Access to the cluster as a user with the cluster-admin role.

Procedure

Modify the APIServer object:
```
$ oc edit apiserver
```
Set the encryption field type to identity:
```
spec:
  encryption:
    type: identity 1
```
1
The identity type is the default value and means that no encryption is performed.
Save the file to apply the changes.
The decryption process starts. It can take 20 minutes or longer for this process to complete, depending on the size of your cluster.
Verify that etcd decryption was successful.
1. Review the Encrypted status condition for the OpenShift API server to verify that its resources were successfully decrypted:
```
$ oc get openshiftapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'
```
  The output shows DecryptionCompleted upon successful decryption:
```
DecryptionCompleted
Encryption mode set to identity and everything is decrypted
```
  If the output shows DecryptionInProgress, this means that decryption is still in progress. Wait a few minutes and try again.
2. Review the Encrypted status condition for the Kubernetes API server to verify that its resources were successfully decrypted:
```
$ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="Encrypted")]}{.reason}{"\n"}{.message}{"\n"}'
```
  The output shows DecryptionCompleted upon successful decryption:
```
DecryptionCompleted
Encryption mode set to identity and everything is decrypted
```
  If the output shows DecryptionInProgress, this means that decryption is still in progress. Wait a few minutes and try again.

1.8.4. Backing up etcd data

Follow these steps to back up etcd data by creating an etcd snapshot and backing up the resources for the static pods. This backup can be saved and used at a later time if you need to restore etcd.

Important

Only save a backup from a single master host. Do not take a backup from each master host in the cluster.

Prerequisites

You have access to the cluster as a user with the cluster-admin role.
You have checked whether the cluster-wide proxy is enabled.
Tip
You can check whether the proxy is enabled by reviewing the output of oc get proxy cluster -o yaml. The proxy is enabled if the httpProxy, httpsProxy, and noProxy fields have values set.

Procedure

Start a debug session for a master node:
```
$ oc debug node/<node_name>
```
Change your root directory to the host:
```
sh-4.2# chroot /host
```
If the cluster-wide proxy is enabled, be sure that you have exported the NO_PROXY, HTTP_PROXY, and HTTPS_PROXY environment variables.
Run the cluster-backup.sh script and pass in the location to save the backup to.
Tip
The cluster-backup.sh script is maintained as a component of the etcd Cluster Operator and is a wrapper around the etcdctl snapshot save command.
```
sh-4.4# /usr/local/bin/cluster-backup.sh /home/core/assets/backup
```
Example script output
```
1bf371f1b5a483927cd01bb593b0e12cff406eb8d7d0acf4ab079c36a0abd3f7
etcdctl version: 3.3.18
API version: 3.3
found latest kube-apiserver-pod: /etc/kubernetes/static-pod-resources/kube-apiserver-pod-7
found latest kube-controller-manager-pod: /etc/kubernetes/static-pod-resources/kube-controller-manager-pod-8
found latest kube-scheduler-pod: /etc/kubernetes/static-pod-resources/kube-scheduler-pod-6
found latest etcd-pod: /etc/kubernetes/static-pod-resources/etcd-pod-2
Snapshot saved at /home/core/assets/backup/snapshot_2020-03-18_220218.db
snapshot db and kube resources are successfully saved to /home/core/assets/backup
```
In this example, two files are created in the /home/core/assets/backup/ directory on the master host:
- snapshot_<datetimestamp>.db: This file is the etcd snapshot.
- static_kuberesources_<datetimestamp>.tar.gz: This file contains the resources for the static pods. If etcd encryption is enabled, it also contains the encryption keys for the etcd snapshot.
  Note
  If etcd encryption is enabled, it is recommended to store this second file separately from the etcd snapshot for security reasons. However, this file is required in order to restore from the etcd snapshot.
  Keep in mind that etcd encryption only encrypts values, not keys. This means that resource types, namespaces, and object names are unencrypted.

1.8.5. Defragmenting etcd data

Manual defragmentation must be performed periodically to reclaim disk space after etcd history compaction and other events cause disk fragmentation.

History compaction is performed automatically every five minutes and leaves gaps in the back-end database. This fragmented space is available for use by etcd, but is not available to the host file system. You must defragment etcd to make this space available to the host file system.

Because etcd writes data to disk, its performance strongly depends on disk performance. Consider defragmenting etcd every month, twice a month, or as needed for your cluster. You can also monitor the etcd_db_total_size_in_bytes metric to determine whether defragmentation is necessary.

Warning

Defragmenting etcd is a blocking action. The etcd member will not response until defragmentation is complete. For this reason, wait at least one minute between defragmentation actions on each of the pods to allow the cluster to recover.

Follow this procedure to defragment etcd data on each etcd member.

Prerequisites

You have access to the cluster as a user with the cluster-admin role.

Procedure

Determine which etcd member is the leader, because the leader should be defragmented last.

Get the list of etcd pods:

$ oc get pods -n openshift-etcd -o wide | grep etcd

Example output

etcd-ip-10-0-159-225.example.redhat.com                3/3     Running     0          175m   10.0.159.225   ip-10-0-159-225.example.redhat.com   <none>           <none>
etcd-ip-10-0-191-37.example.redhat.com                 3/3     Running     0          173m   10.0.191.37    ip-10-0-191-37.example.redhat.com    <none>           <none>
etcd-ip-10-0-199-170.example.redhat.com                3/3     Running     0          176m   10.0.199.170   ip-10-0-199-170.example.redhat.com   <none>           <none>

Choose a pod and run the following command to determine which etcd member is the leader:

$ oc rsh -n openshift-etcd etcd-ip-10-0-159-225.us-west-1.compute.internal etcdctl endpoint status --cluster -w table

Example output

Defaulting container name to etcdctl.
Use 'oc describe pod/etcd-ip-10-0-159-225.example.redhat.com -n openshift-etcd' to see all of the containers in this pod.
+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|         ENDPOINT          |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|  https://10.0.191.37:2379 | 251cd44483d811c3 |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
| https://10.0.159.225:2379 | 264c7c58ecbdabee |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
| https://10.0.199.170:2379 | 9ac311f93915cc79 |   3.4.9 |  104 MB |      true |      false |         7 |      91624 |              91624 |        |
+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+

Based on the IS LEADER column of this output, the https://10.0.199.170:2379 endpoint is the leader. Matching this endpoint with the output of the previous step, the pod name of the leader is etcd-ip-10-0-199-170.example.redhat.com.

Defragment an etcd member.

Connect to the running etcd container, passing in the name of a pod that is not the leader:
```
$ oc rsh -n openshift-etcd etcd-ip-10-0-159-225.example.redhat.com
```
Unset the ETCDCTL_ENDPOINTS environment variable:
```
sh-4.4# unset ETCDCTL_ENDPOINTS
```

Defragment the etcd member:

sh-4.4# etcdctl --command-timeout=30s --endpoints=https://localhost:2379 defrag

Example output

Finished defragmenting etcd member[https://localhost:2379]

If a timeout error occurs, increase the value for --command-timeout until the command succeeds.

Verify that the database size was reduced:

sh-4.4# etcdctl endpoint status -w table --cluster

Example output

+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|         ENDPOINT          |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|  https://10.0.191.37:2379 | 251cd44483d811c3 |   3.4.9 |  104 MB |     false |      false |         7 |      91624 |              91624 |        |
| https://10.0.159.225:2379 | 264c7c58ecbdabee |   3.4.9 |   41 MB |     false |      false |         7 |      91624 |              91624 |        | 1
| https://10.0.199.170:2379 | 9ac311f93915cc79 |   3.4.9 |  104 MB |      true |      false |         7 |      91624 |              91624 |        |
+---------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+

This example shows that the database size for this etcd member is now 41 MB as opposed to the starting size of 104 MB.

Repeat these steps to connect to each of the other etcd members and defragment them. Always defragment the leader last.
Wait at least one minute between defragmentation actions to allow the etcd pod to recover. Until the etcd pod recovers, the etcd member will not respond.

If any NOSPACE alarms were triggered due to the space quota being exceeded, clear them.
1. Check if there are any NOSPACE alarms:
```
sh-4.4# etcdctl alarm list
```
  Example output
```
memberID:12345678912345678912 alarm:NOSPACE
```
2. Clear the alarms:
```
sh-4.4# etcdctl alarm disarm
```

1.8.6. Restoring to a previous cluster state

You can use a saved etcd backup to restore back to a previous cluster state. You use the etcd backup to restore a single control plane host. Then the etcd cluster Operator handles scaling to the remaining master hosts.

Important

When you restore your cluster, you must use an etcd backup that was taken from the same z-stream release. For example, an OpenShift Container Platform 4.5.2 cluster must use an etcd backup that was taken from 4.5.2.

Prerequisites

Access to the cluster as a user with the cluster-admin role.
A healthy master host to use as the recovery host.
SSH access to master hosts.
A backup directory containing both the etcd snapshot and the resources for the static pods, which were from the same backup. The file names in the directory must be in the following formats: snapshot_<datetimestamp>.db and static_kuberesources_<datetimestamp>.tar.gz.

Procedure

Select a control plane host to use as the recovery host. This is the host that you will run the restore operation on.
Establish SSH connectivity to each of the control plane nodes, including the recovery host.
The Kubernetes API server becomes inaccessible after the restore process starts, so you cannot access the control plane nodes. For this reason, it is recommended to establish SSH connectivity to each control plane host in a separate terminal.
Important
If you do not complete this step, you will not be able to access the master hosts to complete the restore procedure, and you will be unable to recover your cluster from this state.
Copy the etcd backup directory to the recovery control plane host.
This procedure assumes that you copied the backup directory containing the etcd snapshot and the resources for the static pods to the /home/core/ directory of your recovery control plane host.
Stop the static pods on all other control plane nodes.
Note
It is not required to manually stop the pods on the recovery host. The recovery script will stop the pods on the recovery host.
1. Access a control plane host that is not the recovery host.
2. Move the existing etcd pod file out of the kubelet manifest directory:
```
[core@ip-10-0-154-194 ~]$ sudo mv /etc/kubernetes/manifests/etcd-pod.yaml /tmp
```
3. Verify that the etcd pods are stopped.
```
[core@ip-10-0-154-194 ~]$ sudo crictl ps | grep etcd | grep -v operator
```
  The output of this command should be empty. If it is not empty, wait a few minutes and check again.
4. Move the existing Kubernetes API server pod file out of the kubelet manifest directory:
```
[core@ip-10-0-154-194 ~]$ sudo mv /etc/kubernetes/manifests/kube-apiserver-pod.yaml /tmp
```
5. Verify that the Kubernetes API server pods are stopped.
```
[core@ip-10-0-154-194 ~]$ sudo crictl ps | grep kube-apiserver | grep -v operator
```
  The output of this command should be empty. If it is not empty, wait a few minutes and check again.
6. Move the etcd data directory to a different location:
```
[core@ip-10-0-154-194 ~]$ sudo mv /var/lib/etcd/ /tmp
```
7. Repeat this step on each of the other master hosts that is not the recovery host.
Access the recovery control plane host.
If the cluster-wide proxy is enabled, be sure that you have exported the NO_PROXY, HTTP_PROXY, and HTTPS_PROXY environment variables.
Tip
You can check whether the proxy is enabled by reviewing the output of oc get proxy cluster -o yaml. The proxy is enabled if the httpProxy, httpsProxy, and noProxy fields have values set.

Run the restore script on the recovery control plane host and pass in the path to the etcd backup directory:

[core@ip-10-0-143-125 ~]$ sudo -E /usr/local/bin/cluster-restore.sh /home/core/backup

Example script output

...stopping kube-scheduler-pod.yaml
...stopping kube-controller-manager-pod.yaml
...stopping etcd-pod.yaml
...stopping kube-apiserver-pod.yaml
Waiting for container etcd to stop
.complete
Waiting for container etcdctl to stop
.............................complete
Waiting for container etcd-metrics to stop
complete
Waiting for container kube-controller-manager to stop
complete
Waiting for container kube-apiserver to stop
..........................................................................................complete
Waiting for container kube-scheduler to stop
complete
Moving etcd data-dir /var/lib/etcd/member to /var/lib/etcd-backup
starting restore-etcd static pod
starting kube-apiserver-pod.yaml
static-pod-resources/kube-apiserver-pod-7/kube-apiserver-pod.yaml
starting kube-controller-manager-pod.yaml
static-pod-resources/kube-controller-manager-pod-7/kube-controller-manager-pod.yaml
starting kube-scheduler-pod.yaml
static-pod-resources/kube-scheduler-pod-8/kube-scheduler-pod.yaml

Restart the kubelet service on all master hosts.
1. From the recovery host, run the following command:
```
[core@ip-10-0-143-125 ~]$ sudo systemctl restart kubelet.service
```
2. Repeat this step on all other master hosts.

Verify that the single member control plane has started successfully.

From the recovery host, verify that the etcd container is running.

[core@ip-10-0-143-125 ~]$ sudo crictl ps | grep etcd | grep -v operator

Example output

3ad41b7908e32       36f86e2eeaaffe662df0d21041eb22b8198e0e58abeeae8c743c3e6e977e8009                                                         About a minute ago   Running             etcd                                          0                   7c05f8af362f0

From the recovery host, verify that the etcd pod is running.
```
[core@ip-10-0-143-125 ~]$ oc get pods -n openshift-etcd | grep etcd
```
Note
If you attempt to run oc login prior to running this command and receive the following error, wait a few moments for the authentication controllers to start and try again.
```
Unable to connect to the server: EOF
```
Example output
```
NAME                                             READY   STATUS      RESTARTS   AGE
etcd-ip-10-0-143-125.ec2.internal                1/1     Running     1          2m47s
```
If the status is Pending, or the output lists more than one running etcd pod, wait a few minutes and check again.

Force etcd redeployment.
In a terminal that has access to the cluster as a cluster-admin user, run the following command:
```
$ oc patch etcd cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge 1
```
1 1
The forceRedeploymentReason value must be unique, which is why a timestamp is appended.
When the etcd cluster Operator performs a redeployment, the existing nodes are started with new pods similar to the initial bootstrap scale up.
Verify all nodes are updated to the latest revision.
In a terminal that has access to the cluster as a cluster-admin user, run the following command:
```
$ oc get etcd -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'
```
Review the NodeInstallerProgressing status condition for etcd to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:
```
AllNodesAtLatestRevision
3 nodes are at revision 7 1
```
1
In this example, the latest revision number is 7.
If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.
After etcd is redeployed, force new rollouts for the control plane. The Kubernetes API server will reinstall itself on the other nodes because the kubelet is connected to API servers using an internal load balancer.
In a terminal that has access to the cluster as a cluster-admin user, run the following commands.
1. Update the kubeapiserver:
```
$ oc patch kubeapiserver cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge
```
  Verify all nodes are updated to the latest revision.
```
$ oc get kubeapiserver -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'
```
  Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:
```
AllNodesAtLatestRevision
3 nodes are at revision 7 1
```
  1
  In this example, the latest revision number is 7.
  If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.
2. Update the kubecontrollermanager:
```
$ oc patch kubecontrollermanager cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge
```
  Verify all nodes are updated to the latest revision.
```
$ oc get kubecontrollermanager -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'
```
  Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:
```
AllNodesAtLatestRevision
3 nodes are at revision 7 1
```
  1
  In this example, the latest revision number is 7.
  If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.
3. Update the kubescheduler:
```
$ oc patch kubescheduler cluster -p='{"spec": {"forceRedeploymentReason": "recovery-'"$( date --rfc-3339=ns )"'"}}' --type=merge
```
  Verify all nodes are updated to the latest revision.
```
$ oc get kubescheduler -o=jsonpath='{range .items[0].status.conditions[?(@.type=="NodeInstallerProgressing")]}{.reason}{"\n"}{.message}{"\n"}'
```
  Review the NodeInstallerProgressing status condition to verify that all nodes are at the latest revision. The output shows AllNodesAtLatestRevision upon successful update:
```
AllNodesAtLatestRevision
3 nodes are at revision 7 1
```
  1
  In this example, the latest revision number is 7.
  If the output includes multiple revision numbers, such as 2 nodes are at revision 6; 1 nodes are at revision 7, this means that the update is still in progress. Wait a few minutes and try again.

Verify that all master hosts have started and joined the cluster.

In a terminal that has access to the cluster as a cluster-admin user, run the following command:

$ oc get pods -n openshift-etcd | grep etcd

Example output

etcd-ip-10-0-143-125.ec2.internal                2/2     Running     0          9h
etcd-ip-10-0-154-194.ec2.internal                2/2     Running     0          9h
etcd-ip-10-0-173-171.ec2.internal                2/2     Running     0          9h

Note that it might take several minutes after completing this procedure for all services to be restored. For example, authentication by using oc login might not immediately work until the OAuth server pods are restarted.

1.9. Pod disruption budgets

Understand and configure pod disruption budgets.

1.9.1. Understanding how to use pod disruption budgets to specify the number of pods that must be up

A pod disruption budget is part of the Kubernetes API, which can be managed with oc commands like other object types. They allow the specification of safety constraints on pods during operations, such as draining a node for maintenance.

PodDisruptionBudget is an API object that specifies the minimum number or percentage of replicas that must be up at a time. Setting these in projects can be helpful during node maintenance (such as scaling a cluster down or a cluster upgrade) and is only honored on voluntary evictions (not on node failures).

A PodDisruptionBudget object’s configuration consists of the following key parts:

A label selector, which is a label query over a set of pods.
An availability level, which specifies the minimum number of pods that must be available simultaneously, either:
- minAvailable is the number of pods must always be available, even during a disruption.
- maxUnavailable is the number of pods can be unavailable during a disruption.

Note

A maxUnavailable of 0% or 0 or a minAvailable of 100% or equal to the number of replicas is permitted but can block nodes from being drained.

You can check for pod disruption budgets across all projects with the following:

$ oc get poddisruptionbudget --all-namespaces

Example output

NAMESPACE         NAME          MIN-AVAILABLE   SELECTOR
another-project   another-pdb   4               bar=foo
test-project      my-pdb        2               foo=bar

The PodDisruptionBudget is considered healthy when there are at least minAvailable pods running in the system. Every pod above that limit can be evicted.

Note

Depending on your pod priority and preemption settings, lower-priority pods might be removed despite their pod disruption budget requirements.

1.9.2. Specifying the number of pods that must be up with pod disruption budgets

You can use a PodDisruptionBudget object to specify the minimum number or percentage of replicas that must be up at a time.

Procedure

To configure a pod disruption budget:

Create a YAML file with the an object definition similar to the following:
```
apiVersion: policy/v1beta1 1
kind: PodDisruptionBudget
metadata:
  name: my-pdb
spec:
  minAvailable: 2  2
  selector:  3
    matchLabels:
      foo: bar
```
1
PodDisruptionBudget is part of the policy/v1beta1 API group.
2
The minimum number of pods that must be available simultaneously. This can be either an integer or a string specifying a percentage, for example, 20%.
3
A label query over a set of resources. The result of matchLabels and matchExpressions are logically conjoined.
Or:
```
apiVersion: policy/v1beta1 1
kind: PodDisruptionBudget
metadata:
  name: my-pdb
spec:
  maxUnavailable: 25% 2
  selector: 3
    matchLabels:
      foo: bar
```
1
PodDisruptionBudget is part of the policy/v1beta1 API group.
2
The maximum number of pods that can be unavailable simultaneously. This can be either an integer or a string specifying a percentage, for example, 20%.
3
A label query over a set of resources. The result of matchLabels and matchExpressions are logically conjoined.
Run the following command to add the object to project:
```
$ oc create -f </path/to/file> -n <project_name>
```

1.10. Rotating or removing cloud provider credentials

After installing OpenShift Container Platform, some organizations require the rotation or removal of the cloud provider credentials that were used during the initial installation.

To allow the cluster to use the new credentials, you must update the secrets that the Cloud Credential Operator (CCO) uses to manage cloud provider credentials.

1.10.1. Removing cloud provider credentials

After installing an OpenShift Container Platform cluster on Amazon Web Services (AWS), you can remove the administrator-level credential secret from the kube-system namespace in the cluster. The administrator-level credential is required only during changes that require its elevated permissions, such as upgrades.

Note

Prior to a non z-stream upgrade, you must reinstate the credential secret with the administrator-level credential. If the credential is not present, the upgrade might be blocked.

Prerequisites

Your cluster is installed on a platform that supports removing cloud credentials from the CCO.

Procedure

In the Administrator perspective of the web console, navigate to Workloads Secrets.
In the table on the Secrets page, find the aws-creds root secret for AWS.
Platform Secret name

AWS

aws-creds
Click the Options menu in the same row as the secret and select Delete Secret.

Platform	Secret name
AWS	`aws-creds`

1.11. Configuring image streams for a disconnected cluster

After installing OpenShift Container Platform in a disconnected environment, configure the image streams for the Cluster Samples Operator and the must-gather image stream.

1.11.1. Preparing your cluster to gather support data

Clusters using a restricted network must import the default must-gather image in order to gather debugging data for Red Hat support. The must-gather image is not imported by default, and clusters on a restricted network do not have access to the internet to pull the latest image from a remote repository.

Procedure

If you have not added your mirror registry’s trusted CA to your cluster’s image configuration object as part of the Cluster Samples Operator configuration, perform the following steps:
1. Create the cluster’s image configuration object:
```
$ oc create configmap registry-config --from-file=${MIRROR_ADDR_HOSTNAME}..5000=$path/ca.crt -n openshift-config
```
2. Add the required trusted CAs for the mirror in the cluster’s image configuration object:
```
$ oc patch image.config.openshift.io/cluster --patch '{"spec":{"additionalTrustedCA":{"name":"registry-config"}}}' --type=merge
```
Import the default must-gather image from your installation payload:
```
$ oc import-image is/must-gather -n openshift
```

When running the oc adm must-gather command, use the --image flag and point to the payload image, as in the following example:

$ oc adm must-gather --image=$(oc adm release info --image-for must-gather)

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 1. Post-installation cluster tasks

1.1. Adjust worker nodes

1.1.1. Understanding the difference between machine sets and the machine config pool

1.1.2. Scaling a machine set manually

1.1.3. The machine set deletion policy

1.1.4. Creating default cluster-wide node selectors

1.2. Creating infrastructure machine sets for production environments

1.2.1. Creating a machine set

1.2.2. Creating an infrastructure node

1.2.3. Creating a machine config pool for infrastructure machines

1.3. Assigning machine set resources to infrastructure nodes

1.3.1. Binding infrastructure node workloads using taints and tolerations

1.4. Moving resources to infrastructure machine sets

1.4.1. Moving the router

1.4.2. Moving the default registry

1.4.3. Moving the monitoring solution

1.4.4. Moving the cluster logging resources

1.5. About the cluster autoscaler

1.5.1. ClusterAutoscaler resource definition

1.5.2. Deploying the cluster autoscaler

1.6. About the machine autoscaler

1.6.1. MachineAutoscaler resource definition

1.6.2. Deploying the machine autoscaler

1.7. Enabling Technology Preview features using FeatureGates

1.8. etcd tasks

1.8.1. About etcd encryption

1.8.2. Enabling etcd encryption

1.8.3. Disabling etcd encryption

1.8.4. Backing up etcd data

1.8.5. Defragmenting etcd data

1.8.6. Restoring to a previous cluster state

1.9. Pod disruption budgets

1.9.1. Understanding how to use pod disruption budgets to specify the number of pods that must be up

1.9.2. Specifying the number of pods that must be up with pod disruption budgets

1.10. Rotating or removing cloud provider credentials

1.10.1. Removing cloud provider credentials

1.11. Configuring image streams for a disconnected cluster

1.11.1. Preparing your cluster to gather support data

Additional resources

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Red Hat legal and privacy links

Red Hat legal and privacy links