附录 E. 审计事件

    
    ####################### SIGNED AUDIT EVENTS #############################
    # Common fields:
    # - Outcome: "Success" or "Failure"
    # - SubjectID: The UID of the user responsible for the operation
    #     "$System$" or "SYSTEM" if system-initiated operation (e.g. log signing).
    #
    #########################################################################
    # Required Audit Events
    #
    # Event: ACCESS_SESSION_ESTABLISH with [Outcome=Failure]
    # Description: This event is used when access session failed to establish.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientIP: Client IP address.
    # - ServerIP: Server IP address.
    # - SubjectID: Client certificate subject DN.
    # - Outcome: Failure
    # - Info: Failure reason.
    #
    LOGGING_SIGNED_AUDIT_ACCESS_SESSION_ESTABLISH_FAILURE=\
    <type=ACCESS_SESSION_ESTABLISH>:[AuditEvent=ACCESS_SESSION_ESTABLISH]{0} access session establish failure
    #
    # Event: ACCESS_SESSION_ESTABLISH with [Outcome=Success]
    # Description: This event is used when access session was established successfully.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientIP: Client IP address.
    # - ServerIP: Server IP address.
    # - SubjectID: Client certificate subject DN.
    # - Outcome: Success
    #
    LOGGING_SIGNED_AUDIT_ACCESS_SESSION_ESTABLISH_SUCCESS=\
    <type=ACCESS_SESSION_ESTABLISH>:[AuditEvent=ACCESS_SESSION_ESTABLISH]{0} access session establish success
    #
    # Event: ACCESS_SESSION_TERMINATED
    # Description: This event is used when access session was terminated.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientIP: Client IP address.
    # - ServerIP: Server IP address.
    # - SubjectID: Client certificate subject DN.
    # - Info: The TLS Alert received from NSS
    # - Outcome: Success
    # - Info: The TLS Alert received from NSS
    #
    LOGGING_SIGNED_AUDIT_ACCESS_SESSION_TERMINATED=\
    <type=ACCESS_SESSION_TERMINATED>:[AuditEvent=ACCESS_SESSION_TERMINATED]{0} access session terminated
    #
    # Event: AUDIT_LOG_SIGNING
    # Description: This event is used when a signature on the audit log is generated (same as "flush" time).
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: Predefined to be "$System$" because this operation
    #     associates with no user.
    # - Outcome: Success
    # - sig: The base-64 encoded signature of the buffer just flushed.
    #
    LOGGING_SIGNED_AUDIT_AUDIT_LOG_SIGNING_3=[AuditEvent=AUDIT_LOG_SIGNING][SubjectID={0}][Outcome={1}] signature of audit buffer just flushed: sig: {2}
    #
    # Event: AUDIT_LOG_STARTUP
    # Description: This event is used at audit function startup.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome:
    #
    LOGGING_SIGNED_AUDIT_AUDIT_LOG_STARTUP_2=<type=AUDIT_LOG_STARTUP>:[AuditEvent=AUDIT_LOG_STARTUP][SubjectID={0}][Outcome={1}] audit function startup
    #
    # Event: AUTH with [Outcome=Failure]
    # Description: This event is used when authentication fails.
    #   In case of TLS-client auth, only webserver env can pick up the TLS violation.
    #   CS authMgr can pick up certificate mismatch, so this event is used.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID:
    # - Outcome: Failure
    #     (obviously, if authentication failed, you won't have a valid SubjectID, so
    #     in this case, SubjectID should be $Unidentified$)
    # - AuthMgr: The authentication manager instance name that did
    #     this authentication.
    # - AttemptedCred: The credential attempted and failed.
    #
    LOGGING_SIGNED_AUDIT_AUTH_FAIL=<type=AUTH>:[AuditEvent=AUTH]{0} authentication failure
    #
    # Event: AUTH with [Outcome=Success]
    # Description: This event is used when authentication succeeded.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of user who has been authenticated
    # - Outcome: Success
    # - AuthMgr: The authentication manager instance name that did
    #     this authentication.
    #
    LOGGING_SIGNED_AUDIT_AUTH_SUCCESS=<type=AUTH>:[AuditEvent=AUTH]{0} authentication success
    #
    # Event: AUTHZ with [Outcome=Failure]
    # Description: This event is used when authorization has failed.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of user who has failed to be authorized for an action
    # - Outcome: Failure
    # - aclResource: The ACL resource ID as defined in ACL resource list.
    # - Op: One of the operations as defined with the ACL statement
    #    e.g. "read" for an ACL statement containing "(read,write)".
    # - Info:
    #
    LOGGING_SIGNED_AUDIT_AUTHZ_FAIL=<type=AUTHZ>:[AuditEvent=AUTHZ]{0} authorization failure
    #
    # Event: AUTHZ with [Outcome=Success]
    # Description: This event is used when authorization is successful.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of user who has been authorized for an action
    # - Outcome: Success
    # - aclResource: The ACL resource ID as defined in ACL resource list.
    # - Op: One of the operations as defined with the ACL statement
    #     e.g. "read" for an ACL statement containing "(read,write)".
    #
    LOGGING_SIGNED_AUDIT_AUTHZ_SUCCESS=<type=AUTHZ>:[AuditEvent=AUTHZ]{0} authorization success
    #
    # Event: CERT_PROFILE_APPROVAL
    # Description: This event is used when an agent approves/disapproves a certificate profile set by the
    #   administrator for automatic approval.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of the CA agent who approved the certificate enrollment profile
    # - Outcome:
    # - ProfileID: One of the profiles defined by the administrator
    #     and to be approved by an agent.
    # - Op: "approve" or "disapprove".
    #
    LOGGING_SIGNED_AUDIT_CERT_PROFILE_APPROVAL_4=<type=CERT_PROFILE_APPROVAL>:[AuditEvent=CERT_PROFILE_APPROVAL][SubjectID={0}][Outcome={1}][ProfileID={2}][Op={3}] certificate profile approval
    #
    # Event: CERT_REQUEST_PROCESSED
    # Description: This event is used when certificate request has just been through the approval process.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: The UID of the agent who approves, rejects, or cancels
    #     the certificate request.
    # - Outcome:
    # - ReqID: The request ID.
    # - InfoName: "certificate" (in case of approval), "rejectReason"
    #     (in case of reject), or "cancelReason" (in case of cancel)
    # - InfoValue: The certificate (in case of success), a reject reason in
    #     text, or a cancel reason in text.
    # - CertSerialNum:
    #
    LOGGING_SIGNED_AUDIT_CERT_REQUEST_PROCESSED=<type=CERT_REQUEST_PROCESSED>:[AuditEvent=CERT_REQUEST_PROCESSED]{0} certificate request processed
    #
    # Event: CERT_SIGNING_INFO
    # Description: This event indicates which key is used to sign certificates.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome: Success
    # - SKI: Subject Key Identifier of the certificate signing certificate
    # - AuthorityID: (applicable only to lightweight CA)
    #
    LOGGING_SIGNED_AUDIT_CERT_SIGNING_INFO=<type=CERT_SIGNING_INFO>:[AuditEvent=CERT_SIGNING_INFO]{0} certificate signing info
    #
    # Event: CERT_STATUS_CHANGE_REQUEST
    # Description: This event is used when a certificate status change request (e.g. revocation)
    #   is made (before approval process).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of uer who performed the action
    # - Outcome:
    # - ReqID: The request ID.
    # - CertSerialNum: The serial number (in hex) of the certificate to be revoked.
    # - RequestType: "revoke", "on-hold", "off-hold"
    #
    LOGGING_SIGNED_AUDIT_CERT_STATUS_CHANGE_REQUEST=<type=CERT_STATUS_CHANGE_REQUEST>:[AuditEvent=CERT_STATUS_CHANGE_REQUEST]{0} certificate revocation/unrevocation request made
    #
    # Event: CERT_STATUS_CHANGE_REQUEST_PROCESSED
    # Description: This event is used when certificate status is changed (revoked, expired, on-hold,
    #   off-hold).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: The UID of the agent that processed the request.
    # - Outcome:
    # - ReqID: The request ID.
    # - RequestType: "revoke", "on-hold", "off-hold"
    # - Approval: "complete", "rejected", or "canceled"
    #     (note that "complete" means "approved")
    # - CertSerialNum: The serial number (in hex).
    # - RevokeReasonNum: One of the following number:
    #     reason number       reason
    #     --------------------------------------
    #     0              Unspecified
    #     1              Key compromised
    #     2              CA key compromised (should not be used)
    #     3              Affiliation changed
    #     4              Certificate superceded
    #     5              Cessation of operation
    #     6              Certificate is on-hold
    # - Info:
    #
    LOGGING_SIGNED_AUDIT_CERT_STATUS_CHANGE_REQUEST_PROCESSED=<type=CERT_STATUS_CHANGE_REQUEST_PROCESSED>:[AuditEvent=CERT_STATUS_CHANGE_REQUEST_PROCESSED]{0} certificate status change request processed
    #
    # Event: CLIENT_ACCESS_SESSION_ESTABLISH with [Outcome=Failure]
    # Description: This event is when access session failed to establish when Certificate System acts as client.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientHost: Client hostname.
    # - ServerHost: Server hostname.
    # - ServerPort: Server port.
    # - SubjectID: SYSTEM
    # - Outcome: Failure
    # - Info:
    #
    LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_ESTABLISH_FAILURE=\
    <type=CLIENT_ACCESS_SESSION_ESTABLISH>:[AuditEvent=CLIENT_ACCESS_SESSION_ESTABLISH]{0} access session failed to establish when Certificate System acts as client
    #
    # Event: CLIENT_ACCESS_SESSION_ESTABLISH with [Outcome=Success]
    # Description: This event is used when access session was established successfully when
    #   Certificate System acts as client.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientHost: Client hostname.
    # - ServerHost: Server hostname.
    # - ServerPort: Server port.
    # - SubjectID: SYSTEM
    # - Outcome: Success
    #
    LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_ESTABLISH_SUCCESS=\
    <type=CLIENT_ACCESS_SESSION_ESTABLISH>:[AuditEvent=CLIENT_ACCESS_SESSION_ESTABLISH]{0} access session establish successfully when Certificate System acts as client
    #
    # Event: CLIENT_ACCESS_SESSION_TERMINATED
    # Description: This event is used when access session was terminated when Certificate System acts as client.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - ClientHost: Client hostname.
    # - ServerHost: Server hostname.
    # - ServerPort: Server port.
    # - SubjectID: SYSTEM
    # - Outcome: Success
    # - Info: The TLS Alert received from NSS
    #
    LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_TERMINATED=\
    <type=CLIENT_ACCESS_SESSION_TERMINATED>:[AuditEvent=CLIENT_ACCESS_SESSION_TERMINATED]{0} access session terminated when Certificate System acts as client
    #
    # Event: CMC_REQUEST_RECEIVED
    # Description: This event is used when a CMC request is received.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: The UID of user that triggered this event.
    #     If CMC requests is signed by an agent, SubjectID should
    #     be that of the agent.
    #     In case of an unsigned request, it would bear $Unidentified$.
    # - Outcome:
    # - CMCRequest: Base64 encoding of the CMC request received
    #
    LOGGING_SIGNED_AUDIT_CMC_REQUEST_RECEIVED_3=<type=CMC_REQUEST_RECEIVED>:[AuditEvent=CMC_REQUEST_RECEIVED][SubjectID={0}][Outcome={1}][CMCRequest={2}] CMC request received
    #
    # Event: CMC_RESPONSE_SENT
    # Description: This event is used when a CMC response is sent.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: The UID of user that triggered this event.
    # - Outcome:
    # - CMCResponse: Base64 encoding of the CMC response sent
    #
    LOGGING_SIGNED_AUDIT_CMC_RESPONSE_SENT_3=<type=CMC_RESPONSE_SENT>:[AuditEvent=CMC_RESPONSE_SENT][SubjectID={0}][Outcome={1}][CMCResponse={2}] CMC response sent
    #
    # Event: CMC_SIGNED_REQUEST_SIG_VERIFY
    # Description: This event is used when agent signed CMC certificate requests or revocation requests
    #   are submitted and signature is verified.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: the user who signed the CMC request (success case)
    # - Outcome:
    # - ReqType: The request type (enrollment, or revocation).
    # - CertSubject: The certificate subject name of the certificate request.
    # - SignerInfo: A unique String representation for the signer.
    #
    LOGGING_SIGNED_AUDIT_CMC_SIGNED_REQUEST_SIG_VERIFY=<type=CMC_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_SIGNED_REQUEST_SIG_VERIFY]{0} agent signed CMC request signature verification
    #
    # Event: CMC_USER_SIGNED_REQUEST_SIG_VERIFY
    # Description: This event is used when CMC (user-signed or self-signed) certificate requests or revocation requests
    #   are submitted and signature is verified.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: the user who signed the CMC request (success case)
    # - Outcome:
    # - ReqType: The request type (enrollment, or revocation).
    # - CertSubject: The certificate subject name of the certificate request.
    # - CMCSignerInfo: A unique String representation for the CMC request signer.
    # - info:
    #
    LOGGING_SIGNED_AUDIT_CMC_USER_SIGNED_REQUEST_SIG_VERIFY_FAILURE=<type=CMC_USER_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_USER_SIGNED_REQUEST_SIG_VERIFY]{0} User signed CMC request signature verification failure
    LOGGING_SIGNED_AUDIT_CMC_USER_SIGNED_REQUEST_SIG_VERIFY_SUCCESS=<type=CMC_USER_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_USER_SIGNED_REQUEST_SIG_VERIFY]{0} User signed CMC request signature verification success
    #
    # Event: CONFIG_ACL
    # Description: This event is used when configuring ACL information.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_ACL_3=<type=CONFIG_ACL>:[AuditEvent=CONFIG_ACL][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] ACL configuration parameter(s) change
    #
    # Event: CONFIG_AUTH
    # Description: This event is used when configuring authentication.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #     --- Password MUST NOT be logged ---
    #
    LOGGING_SIGNED_AUDIT_CONFIG_AUTH_3=<type=CONFIG_AUTH>:[AuditEvent=CONFIG_AUTH][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] authentication configuration parameter(s) change
    #
    # Event: CONFIG_CERT_PROFILE
    # Description: This event is used when configuring certificate profile
    #   (general settings and certificate profile).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_CERT_PROFILE_3=<type=CONFIG_CERT_PROFILE>:[AuditEvent=CONFIG_CERT_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] certificate profile configuration parameter(s) change
    #
    # Event: CONFIG_CRL_PROFILE
    # Description: This event is used when configuring CRL profile
    #   (extensions, frequency, CRL format).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_CRL_PROFILE_3=<type=CONFIG_CRL_PROFILE>:[AuditEvent=CONFIG_CRL_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] CRL profile configuration parameter(s) change
    #
    # Event: CONFIG_DRM
    # Description: This event is used when configuring KRA.
    #   This includes key recovery scheme, change of any secret component.
    # Applicable subsystems: KRA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #     --- secret component (password) MUST NOT be logged ---
    #
    LOGGING_SIGNED_AUDIT_CONFIG_DRM_3=<type=CONFIG_DRM>:[AuditEvent=CONFIG_DRM][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] DRM configuration parameter(s) change
    #
    # Event: CONFIG_OCSP_PROFILE
    # Description: This event is used when configuring OCSP profile
    #   (everything under Online Certificate Status Manager).
    # Applicable subsystems: OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_OCSP_PROFILE_3=<type=CONFIG_OCSP_PROFILE>:[AuditEvent=CONFIG_OCSP_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] OCSP profile configuration parameter(s) change
    #
    # Event: CONFIG_ROLE
    # Description: This event is used when configuring role information.
    #   This includes anything under users/groups, add/remove/edit a role, etc.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_ROLE=<type=CONFIG_ROLE>:[AuditEvent=CONFIG_ROLE]{0} role configuration parameter(s) change
    #
    # Event: CONFIG_SERIAL_NUMBER
    # Description: This event is used when configuring serial number ranges
    #   (when requesting a serial number range when cloning, for example).
    # Applicable subsystems: CA, KRA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_SERIAL_NUMBER_1=<type=CONFIG_SERIAL_NUMBER>:[AuditEvent=CONFIG_SERIAL_NUMBER][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] serial number range update
    #
    # Event: CONFIG_SIGNED_AUDIT
    # Description: This event is used when configuring signedAudit.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id of administrator who performed the action
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_SIGNED_AUDIT=<type=CONFIG_SIGNED_AUDIT>:[AuditEvent=CONFIG_SIGNED_AUDIT]{0} signed audit configuration parameter(s) change
    #
    # Event: CONFIG_TRUSTED_PUBLIC_KEY
    # Description: This event is used when:
    #   1. "Manage Certificate" is used to edit the trustness of certificates
    #      and deletion of certificates
    #   2. "Certificate Setup Wizard" is used to import CA certificates into the
    #      certificate database (Although CrossCertificatePairs are stored
    #      within internaldb, audit them as well)
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: ID of administrator who performed this configuration
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_CONFIG_TRUSTED_PUBLIC_KEY=<type=CONFIG_TRUSTED_PUBLIC_KEY>:[AuditEvent=CONFIG_TRUSTED_PUBLIC_KEY]{0} certificate database configuration
    #
    # Event: CRL_SIGNING_INFO
    # Description: This event indicates which key is used to sign CRLs.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome:
    # - SKI: Subject Key Identifier of the CRL signing certificate
    #
    LOGGING_SIGNED_AUDIT_CRL_SIGNING_INFO=<type=CRL_SIGNING_INFO>:[AuditEvent=CRL_SIGNING_INFO]{0} CRL signing info
    #
    # Event: DELTA_CRL_GENERATION
    # Description: This event is used when delta CRL generation is complete.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $Unidentified$
    # - Outcome: "Success" when delta CRL is generated successfully, "Failure" otherwise.
    # - CRLnum: The CRL number that identifies the CRL
    # - Info:
    # - FailureReason:
    #
    LOGGING_SIGNED_AUDIT_DELTA_CRL_GENERATION=<type=DELTA_CRL_GENERATION>:[AuditEvent=DELTA_CRL_GENERATION]{0} Delta CRL generation
    #
    # Event: FULL_CRL_GENERATION
    # Description: This event is used when full CRL generation is complete.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome: "Success" when full CRL is generated successfully, "Failure" otherwise.
    # - CRLnum: The CRL number that identifies the CRL
    # - Info:
    # - FailureReason:
    #
    LOGGING_SIGNED_AUDIT_FULL_CRL_GENERATION=<type=FULL_CRL_GENERATION>:[AuditEvent=FULL_CRL_GENERATION]{0} Full CRL generation
    #
    # Event: PROFILE_CERT_REQUEST
    # Description: This event is used when a profile certificate request is made (before approval process).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: The UID of user that triggered this event.
    #     If CMC enrollment requests signed by an agent, SubjectID should
    #     be that of the agent.
    # - Outcome:
    # - CertSubject: The certificate subject name of the certificate request.
    # - ReqID: The certificate request ID.
    # - ProfileID: One of the certificate profiles defined by the
    #     administrator.
    #
    LOGGING_SIGNED_AUDIT_PROFILE_CERT_REQUEST_5=<type=PROFILE_CERT_REQUEST>:[AuditEvent=PROFILE_CERT_REQUEST][SubjectID={0}][Outcome={1}][ReqID={2}][ProfileID={3}][CertSubject={4}] certificate request made with certificate profiles
    #
    # Event: PROOF_OF_POSSESSION
    # Description: This event is used for proof of possession during certificate enrollment processing.
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: id that represents the authenticated user
    # - Outcome:
    # - Info: some information on when/how it occurred
    #
    LOGGING_SIGNED_AUDIT_PROOF_OF_POSSESSION_3=<type=PROOF_OF_POSSESSION>:[AuditEvent=PROOF_OF_POSSESSION][SubjectID={0}][Outcome={1}][Info={2}] proof of possession
    #
    # Event: OCSP_ADD_CA_REQUEST_PROCESSED
    # Description: This event is used when an add CA request to the OCSP Responder is processed.
    # Applicable subsystems: OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: OCSP administrator user id
    # - Outcome: "Success" when CA is added successfully, "Failure" otherwise.
    # - CASubjectDN: The subject DN of the leaf CA cert in the chain.
    #
    LOGGING_SIGNED_AUDIT_OCSP_ADD_CA_REQUEST_PROCESSED=<type=OCSP_ADD_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_ADD_CA_REQUEST_PROCESSED]{0} Add CA for OCSP Responder
    #
    # Event: OCSP_GENERATION
    # Description: This event is used when an OCSP response generated is complete.
    # Applicable subsystems: CA, OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $NonRoleUser$
    # - Outcome: "Success" when OCSP response is generated successfully, "Failure" otherwise.
    # - FailureReason:
    #
    LOGGING_SIGNED_AUDIT_OCSP_GENERATION=<type=OCSP_GENERATION>:[AuditEvent=OCSP_GENERATION]{0} OCSP response generation
    #
    # Event: OCSP_REMOVE_CA_REQUEST_PROCESSED with [Outcome=Failure]
    # Description: This event is used when a remove CA request to the OCSP Responder is processed and failed.
    # Applicable subsystems: OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: OCSP administrator user id
    # - Outcome: Failure
    # - CASubjectDN: The subject DN of the leaf CA certificate in the chain.
    #
    LOGGING_SIGNED_AUDIT_OCSP_REMOVE_CA_REQUEST_PROCESSED_FAILURE=<type=OCSP_REMOVE_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_REMOVE_CA_REQUEST_PROCESSED]{0} Remove CA for OCSP Responder has failed
    #
    # Event: OCSP_REMOVE_CA_REQUEST_PROCESSED with [Outcome=Success]
    # Description: This event is used when a remove CA request to the OCSP Responder is processed successfully.
    # Applicable subsystems: OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: OCSP administrator user id
    # - Outcome: "Success" when CA is removed successfully, "Failure" otherwise.
    # - CASubjectDN: The subject DN of the leaf CA certificate in the chain.
    #
    LOGGING_SIGNED_AUDIT_OCSP_REMOVE_CA_REQUEST_PROCESSED_SUCCESS=<type=OCSP_REMOVE_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_REMOVE_CA_REQUEST_PROCESSED]{0} Remove CA for OCSP Responder is successful
    #
    # Event: OCSP_SIGNING_INFO
    # Description: This event indicates which key is used to sign OCSP responses.
    # Applicable subsystems: CA, OCSP
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome:
    # - SKI: Subject Key Identifier of the OCSP signing certificate
    # - AuthorityID: (applicable only to lightweight CA)
    #
    LOGGING_SIGNED_AUDIT_OCSP_SIGNING_INFO=<type=OCSP_SIGNING_INFO>:[AuditEvent=OCSP_SIGNING_INFO]{0} OCSP signing info
    #
    # Event: ROLE_ASSUME
    # Description: This event is used when a user assumes a role.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID:
    # - Outcome:
    # - Role: One of the valid roles:
    #     "Administrators", "Certificate Manager Agents", or "Auditors".
    #     Note that customized role names can be used once configured.
    #
    LOGGING_SIGNED_AUDIT_ROLE_ASSUME=<type=ROLE_ASSUME>:[AuditEvent=ROLE_ASSUME]{0} assume privileged role
    #
    # Event: SECURITY_DOMAIN_UPDATE
    # Description: This event is used when updating contents of security domain
    #   (add/remove a subsystem).
    # Applicable subsystems: CA
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: CA administrator user ID
    # - Outcome:
    # - ParamNameValPairs: A name-value pair
    #     (where name and value are separated by the delimiter ;;)
    #     separated by + (if more than one name-value pair) of config params changed.
    #
    LOGGING_SIGNED_AUDIT_SECURITY_DOMAIN_UPDATE_1=<type=SECURITY_DOMAIN_UPDATE>:[AuditEvent=SECURITY_DOMAIN_UPDATE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] security domain update
    #
    # Event: SELFTESTS_EXECUTION
    # Description: This event is used when self tests are run.
    # Applicable subsystems: CA, KRA, OCSP, TKS, TPS
    # Enabled by default: Yes
    # Fields:
    # - SubjectID: $System$
    # - Outcome:
    #
    LOGGING_SIGNED_AUDIT_SELFTESTS_EXECUTION_2=<type=SELFTESTS_EXECUTION>:[AuditEvent=SELFTESTS_EXECUTION][SubjectID={0}][Outcome={1}] self tests execution (see selftests.log for details)