Red Hat Summit Red Hat SummitSupportConsoleDevelopersStart a trialContact

Chapter 8. Deploying machine health checks

You can configure and deploy a machine health check to automatically repair damaged machines in a machine pool.

Important

This process is not applicable to clusters where you manually provisioned the machines yourself. You can use the advanced machine management and scaling capabilities only in clusters where the machine API is operational.

8.1. About machine health checks
Copy link

You can define conditions under which machines in a cluster are considered unhealthy by using a MachineHealthCheck resource. Machines matching the conditions are automatically remediated.

To monitor machine health, create a MachineHealthCheck custom resource (CR) that includes a label for the set of machines to monitor and a condition to check, such as staying in the NotReady status for 15 minutes or displaying a permanent condition in the node-problem-detector.

The controller that observes a MachineHealthCheck CR checks for the condition that you defined. If a machine fails the health check, the machine is automatically deleted and a new one is created to take its place. When a machine is deleted, you see a machine deleted event.

Note

For machines with the master role, the machine health check reports the number of unhealthy nodes, but the machine is not deleted. For example:

Example output

$ oc get machinehealthcheck example -n openshift-machine-api
Copy to Clipboard Toggle word wrap 

NAME      MAXUNHEALTHY   EXPECTEDMACHINES   CURRENTHEALTHY
example   40%            3                  1
Copy to Clipboard Toggle word wrap

To limit the disruptive impact of machine deletions, the controller drains and deletes only one node at a time. If there are more unhealthy machines than the maxUnhealthy threshold allows for in the targeted pool of machines, the controller stops deleting machines and you must manually intervene.

To stop the check, remove the custom resource.

There are limitations to consider before deploying a machine health check:

  • Only machines owned by a machine set are remediated by a machine health check.
  • Control plane machines are not currently supported and are not remediated if they are unhealthy.
  • If the node for a machine is removed from the cluster, a machine health check considers the machine to be unhealthy and remediates it immediately.
  • If the corresponding node for a machine does not join the cluster after the nodeStartupTimeout, the machine is remediated.
  • A machine is remediated immediately if the Machine resource phase is Failed.

Additional resources

8.2. Sample MachineHealthCheck resource
Copy link

The MachineHealthCheck resource resembles the following YAML file:

MachineHealthCheck

apiVersion: machine.openshift.io/v1beta1
kind: MachineHealthCheck
metadata:
  name: example
1 

  namespace: openshift-machine-api
spec:
  selector:
    matchLabels:
      machine.openshift.io/cluster-api-machine-role: <role>
2 

      machine.openshift.io/cluster-api-machine-type: <role>
3 

      machine.openshift.io/cluster-api-machineset: <cluster_name>-<label>-<zone>
4 

  unhealthyConditions:
  - type:    "Ready"
    timeout: "300s"
5 

    status: "False"
  - type:    "Ready"
    timeout: "300s"
6 

    status: "Unknown"
  maxUnhealthy: "40%"
7 

  nodeStartupTimeout: "10m"
8
Copy to Clipboard Toggle word wrap

1
Specify the name of the machine health check to deploy.
2 3
Specify a label for the machine pool that you want to check.
4
Specify the machine set to track in <cluster_name>-<label>-<zone> format. For example, prod-node-us-east-1a.
5 6
Specify the timeout duration for a node condition. If a condition is met for the duration of the timeout, the machine will be remediated. Long timeouts can result in long periods of downtime for a workload on an unhealthy machine.
7
Specify the amount of unhealthy machines allowed in the targeted pool. This can be set as a percentage or an integer.
8
Specify the timeout duration that a machine health check must wait for a node to join the cluster before a machine is determined to be unhealthy.
Note

The matchLabels are examples only; you must map your machine groups based on your specific needs.

Short circuiting ensures that machine health checks remediate machines only when the cluster is healthy. Short-circuiting is configured through the maxUnhealthy field in the MachineHealthCheck resource.

If the user defines a value for the maxUnhealthy field, before remediating any machines, the MachineHealthCheck compares the value of maxUnhealthy with the number of machines within its target pool that it has determined to be unhealthy. Remediation is not performed if the number of unhealthy machines exceeds the maxUnhealthy limit.

Important

If maxUnhealthy is not set, the value defaults to 100% and the machines are remediated regardless of the state of the cluster.

The maxUnhealthy field can be set as either an integer or percentage. There are different remediation implementations depending on the maxUnhealthy value.

If maxUnhealthy is set to 2:

  • Remediation will be performed if 2 or fewer nodes are unhealthy
  • Remediation will not be performed if 3 or more nodes are unhealthy

These values are independent of how many machines are being checked by the machine health check.

8.2.1.2. Setting maxUnhealthy by using percentages
Copy link

If maxUnhealthy is set to 40% and there are 25 machines being checked:

  • Remediation will be performed if 10 or fewer nodes are unhealthy
  • Remediation will not be performed if 11 or more nodes are unhealthy

If maxUnhealthy is set to 40% and there are 6 machines being checked:

  • Remediation will be performed if 2 or fewer nodes are unhealthy
  • Remediation will not be performed if 3 or more nodes are unhealthy
Note

The allowed number of machines is rounded down when the percentage of maxUnhealthy machines that are checked is not a whole number.

8.3. Creating a MachineHealthCheck resource
Copy link

You can create a MachineHealthCheck resource for all MachineSets in your cluster. You should not create a MachineHealthCheck resource that targets control plane machines.

Prerequisites

  • Install the oc command line interface.

Procedure

  1. Create a healthcheck.yml file that contains the definition of your machine health check.

  2. Apply the healthcheck.yml file to your cluster: 

    $ oc apply -f healthcheck.yml
    Copy to Clipboard Toggle word wrap
Back to top
Red Hat logoGithubredditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust. Explore our recent updates.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

Theme

© 2025 Red Hat