Ce contenu n'est pas disponible dans la langue sélectionnée.
Chapter 3. Installer-provisioned infrastructure
3.1. Preparing to install a cluster on Azure Stack Hub
You prepare to install an OpenShift Container Platform cluster on Azure Stack Hub by completing the following steps:
- Verifying internet connectivity for your cluster.
- Configuring an Azure Stack Hub account.
- Generating an SSH key pair. You can use this key pair to authenticate into the OpenShift Container Platform cluster’s nodes after it is deployed.
- Downloading the installation program.
-
Installing the OpenShift CLI (
oc
). - The Cloud Credential Operator (CCO) only supports your cloud provider in manual mode. As a result, you must manually manage clould credentials by specifying the identity and access management (IAM) secrets for your cloud provider.
3.1.1. Internet access for OpenShift Container Platform
In OpenShift Container Platform 4.17, you require access to the internet to install your cluster.
You must have internet access to:
- Access OpenShift Cluster Manager to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
- Access Quay.io to obtain the packages that are required to install your cluster.
- Obtain the packages that are required to perform cluster updates.
If your cluster cannot have direct internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the required content and use it to populate a mirror registry with the installation packages. With some installation types, the environment that you install your cluster in will not require internet access. Before you update the cluster, you update the content of the mirror registry.
3.1.2. Generating a key pair for cluster node SSH access
During an OpenShift Container Platform installation, you can provide an SSH public key to the installation program. The key is passed to the Red Hat Enterprise Linux CoreOS (RHCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys
list for the core
user on each node, which enables password-less authentication.
After the key is passed to the nodes, you can use the key pair to SSH in to the RHCOS nodes as the user core
. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.
If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather
command also requires the SSH public key to be in place on the cluster nodes.
Do not skip this procedure in production environments, where disaster recovery and debugging is required.
You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.
Procedure
If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
- 1
- Specify the path and file name, such as
~/.ssh/id_ed25519
, of the new SSH key. If you have an existing key pair, ensure your public key is in the your~/.ssh
directory.
NoteIf you plan to install an OpenShift Container Platform cluster that uses the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the
x86_64
,ppc64le
, ands390x
architectures, do not create a key that uses theed25519
algorithm. Instead, create a key that uses thersa
orecdsa
algorithm.View the public SSH key:
$ cat <path>/<file_name>.pub
For example, run the following to view the
~/.ssh/id_ed25519.pub
public key:$ cat ~/.ssh/id_ed25519.pub
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the
./openshift-install gather
command.NoteOn some distributions, default SSH private key identities such as
~/.ssh/id_rsa
and~/.ssh/id_dsa
are managed automatically.If the
ssh-agent
process is not already running for your local user, start it as a background task:$ eval "$(ssh-agent -s)"
Example output
Agent pid 31874
NoteIf your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the
ssh-agent
:$ ssh-add <path>/<file_name> 1
- 1
- Specify the path and file name for your SSH private key, such as
~/.ssh/id_ed25519
Example output
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
Next steps
- When you install OpenShift Container Platform, provide the SSH public key to the installation program.
3.1.3. Obtaining the installation program
Before you install OpenShift Container Platform, download the installation file on the host you are using for installation.
Prerequisites
- You have a computer that runs Linux or macOS, with at least 1.2 GB of local disk space.
Procedure
- Go to the Cluster Type page on the Red Hat Hybrid Cloud Console. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
- Select your infrastructure provider from the Run it yourself section of the page.
- Select your host operating system and architecture from the dropdown menus under OpenShift Installer and click Download Installer.
Place the downloaded file in the directory where you want to store the installation configuration files.
Important- The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both of the files are required to delete the cluster.
- Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
$ tar -xvf openshift-install-linux.tar.gz
- Download your installation pull secret from Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.
Alternatively, you can retrieve the installation program from the Red Hat Customer Portal, where you can specify a version of the installation program to download. However, you must have an active subscription to access this page.
3.1.4. Installing the OpenShift CLI
You can install the OpenShift CLI (oc
) to interact with OpenShift Container Platform from a command-line interface. You can install oc
on Linux, Windows, or macOS.
If you installed an earlier version of oc
, you cannot use it to complete all of the commands in OpenShift Container Platform 4.17. Download and install the new version of oc
.
Installing the OpenShift CLI on Linux
You can install the OpenShift CLI (oc
) binary on Linux by using the following procedure.
Procedure
- Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
- Select the architecture from the Product Variant drop-down list.
- Select the appropriate version from the Version drop-down list.
- Click Download Now next to the OpenShift v4.17 Linux Clients entry and save the file.
Unpack the archive:
$ tar xvf <file>
Place the
oc
binary in a directory that is on yourPATH
.To check your
PATH
, execute the following command:$ echo $PATH
Verification
After you install the OpenShift CLI, it is available using the
oc
command:$ oc <command>
Installing the OpenShift CLI on Windows
You can install the OpenShift CLI (oc
) binary on Windows by using the following procedure.
Procedure
- Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
- Select the appropriate version from the Version drop-down list.
- Click Download Now next to the OpenShift v4.17 Windows Client entry and save the file.
- Unzip the archive with a ZIP program.
Move the
oc
binary to a directory that is on yourPATH
.To check your
PATH
, open the command prompt and execute the following command:C:\> path
Verification
After you install the OpenShift CLI, it is available using the
oc
command:C:\> oc <command>
Installing the OpenShift CLI on macOS
You can install the OpenShift CLI (oc
) binary on macOS by using the following procedure.
Procedure
- Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
- Select the appropriate version from the Version drop-down list.
Click Download Now next to the OpenShift v4.17 macOS Clients entry and save the file.
NoteFor macOS arm64, choose the OpenShift v4.17 macOS arm64 Client entry.
- Unpack and unzip the archive.
Move the
oc
binary to a directory on your PATH.To check your
PATH
, open a terminal and execute the following command:$ echo $PATH
Verification
Verify your installation by using an
oc
command:$ oc <command>
3.1.5. Telemetry access for OpenShift Container Platform
In OpenShift Container Platform 4.17, the Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, requires internet access. If your cluster is connected to the internet, Telemetry runs automatically, and your cluster is registered to OpenShift Cluster Manager.
After you confirm that your OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually by using OpenShift Cluster Manager, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.
Additional resources
3.2. Installing a cluster on Azure Stack Hub with customizations
In OpenShift Container Platform version 4.17, you can install a cluster on Microsoft Azure Stack Hub with an installer-provisioned infrastructure. However, you must manually configure the install-config.yaml
file to specify values that are specific to Azure Stack Hub.
While you can select azure
when using the installation program to deploy a cluster using installer-provisioned infrastructure, this option is only supported for the Azure Public Cloud.
3.2.1. Prerequisites
- You reviewed details about the OpenShift Container Platform installation and update processes.
- You read the documentation on selecting a cluster installation method and preparing it for users.
- You configured an Azure Stack Hub account to host the cluster.
- If you use a firewall, you configured it to allow the sites that your cluster requires access to.
- You verified that you have approximately 16 GB of local disk space. Installing the cluster requires that you download the RHCOS virtual hard drive (VHD) cluster image and upload it to your Azure Stack Hub environment so that it is accessible during deployment. Decompressing the VHD files requires this amount of local disk space.
3.2.2. Uploading the RHCOS cluster image
You must download the RHCOS virtual hard disk (VHD) cluster image and upload it to your Azure Stack Hub environment so that it is accessible during deployment.
Prerequisites
- Generate the Ignition config files for your cluster.
Procedure
Obtain the RHCOS VHD cluster image:
Export the URL of the RHCOS VHD to an environment variable.
$ export COMPRESSED_VHD_URL=$(openshift-install coreos print-stream-json | jq -r '.architectures.x86_64.artifacts.azurestack.formats."vhd.gz".disk.location')
Download the compressed RHCOS VHD file locally.
$ curl -O -L ${COMPRESSED_VHD_URL}
Decompress the VHD file.
NoteThe decompressed VHD file is approximately 16 GB, so be sure that your host system has 16 GB of free space available. The VHD file can be deleted once you have uploaded it.
-
Upload the local VHD to the Azure Stack Hub environment, making sure that the blob is publicly available. For example, you can upload the VHD to a blob using the
az
cli or the web portal.
3.2.3. Manually creating the installation configuration file
Installing the cluster requires that you manually create the installation configuration file.
Prerequisites
- You have an SSH public key on your local machine to provide to the installation program. The key will be used for SSH authentication onto your cluster nodes for debugging and disaster recovery.
- You have obtained the OpenShift Container Platform installation program and the pull secret for your cluster.
Procedure
Create an installation directory to store your required installation assets in:
$ mkdir <installation_directory>
ImportantYou must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
Customize the sample
install-config.yaml
file template that is provided and save it in the<installation_directory>
.NoteYou must name this configuration file
install-config.yaml
.Make the following modifications:
- Specify the required installation parameters.
-
Update the
platform.azure
section to specify the parameters that are specific to Azure Stack Hub. Optional: Update one or more of the default configuration parameters to customize the installation.
For more information about the parameters, see "Installation configuration parameters".
Back up the
install-config.yaml
file so that you can use it to install multiple clusters.ImportantThe
install-config.yaml
file is consumed during the next step of the installation process. You must back it up now.
Additional resources
3.2.3.1. Sample customized install-config.yaml file for Azure Stack Hub
You can customize the install-config.yaml
file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.
This sample YAML file is provided for reference only. Use it as a resource to enter parameter values into the installation configuration file that you created manually.
apiVersion: v1 baseDomain: example.com 1 credentialsMode: Manual controlPlane: 2 3 name: master platform: azure: osDisk: diskSizeGB: 1024 4 diskType: premium_LRS replicas: 3 compute: 5 - name: worker platform: azure: osDisk: diskSizeGB: 512 6 diskType: premium_LRS replicas: 3 metadata: name: test-cluster 7 8 networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23 machineNetwork: - cidr: 10.0.0.0/16 networkType: OVNKubernetes 9 serviceNetwork: - 172.30.0.0/16 platform: azure: armEndpoint: azurestack_arm_endpoint 10 11 baseDomainResourceGroupName: resource_group 12 13 region: azure_stack_local_region 14 15 resourceGroupName: existing_resource_group 16 outboundType: Loadbalancer cloudName: AzureStackCloud 17 clusterOSimage: https://vhdsa.blob.example.example.com/vhd/rhcos-410.84.202112040202-0-azurestack.x86_64.vhd 18 19 pullSecret: '{"auths": ...}' 20 21 fips: false 22 sshKey: ssh-ed25519 AAAA... 23 additionalTrustBundle: | 24 -----BEGIN CERTIFICATE----- <MY_TRUSTED_CA_CERT> -----END CERTIFICATE-----
- 1 7 10 12 14 17 18 20
- Required.
- 2 5
- If you do not provide these parameters and values, the installation program provides the default value.
- 3
- The
controlPlane
section is a single mapping, but thecompute
section is a sequence of mappings. To meet the requirements of the different data structures, the first line of thecompute
section must begin with a hyphen,-
, and the first line of thecontrolPlane
section must not. Although both sections currently define a single machine pool, it is possible that future versions of OpenShift Container Platform will support defining multiple compute pools during installation. Only one control plane pool is used. - 4 6
- You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
- 8
- The name of the cluster.
- 9
- The cluster network plugin to install. The default value
OVNKubernetes
is the only supported value. - 11
- The Azure Resource Manager endpoint that your Azure Stack Hub operator provides.
- 13
- The name of the resource group that contains the DNS zone for your base domain.
- 15
- The name of your Azure Stack Hub local region.
- 16
- The name of an existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
- 19
- The URL of a storage blob in the Azure Stack environment that contains an RHCOS VHD.
- 21
- The pull secret required to authenticate your cluster.
- 22
- Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.Important
When running Red Hat Enterprise Linux (RHEL) or Red Hat Enterprise Linux CoreOS (RHCOS) booted in FIPS mode, OpenShift Container Platform core components use the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
- 23
- You can optionally provide the
sshKey
value that you use to access the machines in your cluster.NoteFor production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your
ssh-agent
process uses. - 24
- If the Azure Stack Hub environment is using an internal Certificate Authority (CA), adding the CA certificate is required.
3.2.4. Manually manage cloud credentials
The Cloud Credential Operator (CCO) only supports your cloud provider in manual mode. As a result, you must specify the identity and access management (IAM) secrets for your cloud provider.
Procedure
If you have not previously created installation manifest files, do so by running the following command:
$ openshift-install create manifests --dir <installation_directory>
where
<installation_directory>
is the directory in which the installation program creates files.Set a
$RELEASE_IMAGE
variable with the release image from your installation file by running the following command:$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
Extract the list of
CredentialsRequest
custom resources (CRs) from the OpenShift Container Platform release image by running the following command:$ oc adm release extract \ --from=$RELEASE_IMAGE \ --credentials-requests \ --included \1 --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \2 --to=<path_to_directory_for_credentials_requests> 3
- 1
- The
--included
parameter includes only the manifests that your specific cluster configuration requires. - 2
- Specify the location of the
install-config.yaml
file. - 3
- Specify the path to the directory where you want to store the
CredentialsRequest
objects. If the specified directory does not exist, this command creates it.
This command creates a YAML file for each
CredentialsRequest
object.Sample
CredentialsRequest
objectapiVersion: cloudcredential.openshift.io/v1 kind: CredentialsRequest metadata: name: <component_credentials_request> namespace: openshift-cloud-credential-operator ... spec: providerSpec: apiVersion: cloudcredential.openshift.io/v1 kind: AzureProviderSpec roleBindings: - role: Contributor ...
Create YAML files for secrets in the
openshift-install
manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in thespec.secretRef
for eachCredentialsRequest
object.Sample
CredentialsRequest
object with secretsapiVersion: cloudcredential.openshift.io/v1 kind: CredentialsRequest metadata: name: <component_credentials_request> namespace: openshift-cloud-credential-operator ... spec: providerSpec: apiVersion: cloudcredential.openshift.io/v1 kind: AzureProviderSpec roleBindings: - role: Contributor ... secretRef: name: <component_secret> namespace: <component_namespace> ...
Sample
Secret
objectapiVersion: v1 kind: Secret metadata: name: <component_secret> namespace: <component_namespace> data: azure_subscription_id: <base64_encoded_azure_subscription_id> azure_client_id: <base64_encoded_azure_client_id> azure_client_secret: <base64_encoded_azure_client_secret> azure_tenant_id: <base64_encoded_azure_tenant_id> azure_resource_prefix: <base64_encoded_azure_resource_prefix> azure_resourcegroup: <base64_encoded_azure_resourcegroup> azure_region: <base64_encoded_azure_region>
Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.
Additional resources
3.2.5. Configuring the cluster to use an internal CA
If the Azure Stack Hub environment is using an internal Certificate Authority (CA), update the cluster-proxy-01-config.yaml file
to configure the cluster to use the internal CA.
Prerequisites
-
Create the
install-config.yaml
file and specify the certificate trust bundle in.pem
format. - Create the cluster manifests.
Procedure
-
From the directory in which the installation program creates files, go to the
manifests
directory. Add
user-ca-bundle
to thespec.trustedCA.name
field.Example
cluster-proxy-01-config.yaml
fileapiVersion: config.openshift.io/v1 kind: Proxy metadata: creationTimestamp: null name: cluster spec: trustedCA: name: user-ca-bundle status: {}
-
Optional: Back up the
manifests/ cluster-proxy-01-config.yaml
file. The installation program consumes themanifests/
directory when you deploy the cluster.
3.2.6. Deploying the cluster
You can install OpenShift Container Platform on a compatible cloud platform.
You can run the create cluster
command of the installation program only once, during initial installation.
Prerequisites
- You have configured an account with the cloud platform that hosts your cluster.
- You have the OpenShift Container Platform installation program and the pull secret for your cluster.
- You have verified that the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.
Procedure
Change to the directory that contains the installation program and initialize the cluster deployment:
$ ./openshift-install create cluster --dir <installation_directory> \ 1 --log-level=info 2
Verification
When the cluster deployment completes successfully:
-
The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the
kubeadmin
user. -
Credential information also outputs to
<installation_directory>/.openshift_install.log
.
Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.
Example output
... INFO Install complete! INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig' INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com INFO Login to the console with user: "kubeadmin", and password: "password" INFO Time elapsed: 36m22s
-
The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending
node-bootstrapper
certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information. - It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
3.2.7. Logging in to the cluster by using the CLI
You can log in to your cluster as a default system user by exporting the cluster kubeconfig
file. The kubeconfig
file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.
Prerequisites
- You deployed an OpenShift Container Platform cluster.
-
You installed the
oc
CLI.
Procedure
Export the
kubeadmin
credentials:$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
Verify you can run
oc
commands successfully using the exported configuration:$ oc whoami
Example output
system:admin
3.2.8. Logging in to the cluster by using the web console
The kubeadmin
user exists by default after an OpenShift Container Platform installation. You can log in to your cluster as the kubeadmin
user by using the OpenShift Container Platform web console.
Prerequisites
- You have access to the installation host.
- You completed a cluster installation and all cluster Operators are available.
Procedure
Obtain the password for the
kubeadmin
user from thekubeadmin-password
file on the installation host:$ cat <installation_directory>/auth/kubeadmin-password
NoteAlternatively, you can obtain the
kubeadmin
password from the<installation_directory>/.openshift_install.log
log file on the installation host.List the OpenShift Container Platform web console route:
$ oc get routes -n openshift-console | grep 'console-openshift'
NoteAlternatively, you can obtain the OpenShift Container Platform route from the
<installation_directory>/.openshift_install.log
log file on the installation host.Example output
console console-openshift-console.apps.<cluster_name>.<base_domain> console https reencrypt/Redirect None
-
Navigate to the route detailed in the output of the preceding command in a web browser and log in as the
kubeadmin
user.
Additional resources
3.2.9. Next steps
3.3. Installing a cluster on Azure Stack Hub with network customizations
In OpenShift Container Platform version 4.17, you can install a cluster with a customized network configuration on infrastructure that the installation program provisions on Azure Stack Hub. By customizing your network configuration, your cluster can coexist with existing IP address allocations in your environment and integrate with existing MTU and VXLAN configurations.
While you can select azure
when using the installation program to deploy a cluster using installer-provisioned infrastructure, this option is only supported for the Azure Public Cloud.
3.3.1. Prerequisites
- You reviewed details about the OpenShift Container Platform installation and update processes.
- You read the documentation on selecting a cluster installation method and preparing it for users.
- You configured an Azure Stack Hub account to host the cluster.
- If you use a firewall, you configured it to allow the sites that your cluster requires access to.
- You verified that you have approximately 16 GB of local disk space. Installing the cluster requires that you download the RHCOS virtual hard drive (VHD) cluster image and upload it to your Azure Stack Hub environment so that it is accessible during deployment. Decompressing the VHD files requires this amount of local disk space.
3.3.2. Uploading the RHCOS cluster image
You must download the RHCOS virtual hard disk (VHD) cluster image and upload it to your Azure Stack Hub environment so that it is accessible during deployment.
Prerequisites
- Generate the Ignition config files for your cluster.
Procedure
Obtain the RHCOS VHD cluster image:
Export the URL of the RHCOS VHD to an environment variable.
$ export COMPRESSED_VHD_URL=$(openshift-install coreos print-stream-json | jq -r '.architectures.x86_64.artifacts.azurestack.formats."vhd.gz".disk.location')
Download the compressed RHCOS VHD file locally.
$ curl -O -L ${COMPRESSED_VHD_URL}
Decompress the VHD file.
NoteThe decompressed VHD file is approximately 16 GB, so be sure that your host system has 16 GB of free space available. The VHD file can be deleted once you have uploaded it.
-
Upload the local VHD to the Azure Stack Hub environment, making sure that the blob is publicly available. For example, you can upload the VHD to a blob using the
az
cli or the web portal.
3.3.3. Manually creating the installation configuration file
Installing the cluster requires that you manually create the installation configuration file.
Prerequisites
- You have an SSH public key on your local machine to provide to the installation program. The key will be used for SSH authentication onto your cluster nodes for debugging and disaster recovery.
- You have obtained the OpenShift Container Platform installation program and the pull secret for your cluster.
Procedure
Create an installation directory to store your required installation assets in:
$ mkdir <installation_directory>
ImportantYou must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
Customize the sample
install-config.yaml
file template that is provided and save it in the<installation_directory>
.NoteYou must name this configuration file
install-config.yaml
.Make the following modifications:
- Specify the required installation parameters.
-
Update the
platform.azure
section to specify the parameters that are specific to Azure Stack Hub. Optional: Update one or more of the default configuration parameters to customize the installation.
For more information about the parameters, see "Installation configuration parameters".
Back up the
install-config.yaml
file so that you can use it to install multiple clusters.ImportantThe
install-config.yaml
file is consumed during the next step of the installation process. You must back it up now.
Additional resources
3.3.3.1. Sample customized install-config.yaml file for Azure Stack Hub
You can customize the install-config.yaml
file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.
This sample YAML file is provided for reference only. Use it as a resource to enter parameter values into the installation configuration file that you created manually.
apiVersion: v1 baseDomain: example.com 1 credentialsMode: Manual controlPlane: 2 3 name: master platform: azure: osDisk: diskSizeGB: 1024 4 diskType: premium_LRS replicas: 3 compute: 5 - name: worker platform: azure: osDisk: diskSizeGB: 512 6 diskType: premium_LRS replicas: 3 metadata: name: test-cluster 7 8 networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23 machineNetwork: - cidr: 10.0.0.0/16 networkType: OVNKubernetes 9 serviceNetwork: - 172.30.0.0/16 platform: azure: armEndpoint: azurestack_arm_endpoint 10 11 baseDomainResourceGroupName: resource_group 12 13 region: azure_stack_local_region 14 15 resourceGroupName: existing_resource_group 16 outboundType: Loadbalancer cloudName: AzureStackCloud 17 clusterOSimage: https://vhdsa.blob.example.example.com/vhd/rhcos-410.84.202112040202-0-azurestack.x86_64.vhd 18 19 pullSecret: '{"auths": ...}' 20 21 fips: false 22 sshKey: ssh-ed25519 AAAA... 23 additionalTrustBundle: | 24 -----BEGIN CERTIFICATE----- <MY_TRUSTED_CA_CERT> -----END CERTIFICATE-----
- 1 7 10 12 14 17 18 20
- Required.
- 2 5
- If you do not provide these parameters and values, the installation program provides the default value.
- 3
- The
controlPlane
section is a single mapping, but thecompute
section is a sequence of mappings. To meet the requirements of the different data structures, the first line of thecompute
section must begin with a hyphen,-
, and the first line of thecontrolPlane
section must not. Although both sections currently define a single machine pool, it is possible that future versions of OpenShift Container Platform will support defining multiple compute pools during installation. Only one control plane pool is used. - 4 6
- You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
- 8
- The name of the cluster.
- 9
- The cluster network plugin to install. The default value
OVNKubernetes
is the only supported value. - 11
- The Azure Resource Manager endpoint that your Azure Stack Hub operator provides.
- 13
- The name of the resource group that contains the DNS zone for your base domain.
- 15
- The name of your Azure Stack Hub local region.
- 16
- The name of an existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
- 19
- The URL of a storage blob in the Azure Stack environment that contains an RHCOS VHD.
- 21
- The pull secret required to authenticate your cluster.
- 22
- Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.Important
When running Red Hat Enterprise Linux (RHEL) or Red Hat Enterprise Linux CoreOS (RHCOS) booted in FIPS mode, OpenShift Container Platform core components use the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
- 23
- You can optionally provide the
sshKey
value that you use to access the machines in your cluster.NoteFor production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your
ssh-agent
process uses. - 24
- If the Azure Stack Hub environment is using an internal Certificate Authority (CA), adding the CA certificate is required.
3.3.4. Manually manage cloud credentials
The Cloud Credential Operator (CCO) only supports your cloud provider in manual mode. As a result, you must specify the identity and access management (IAM) secrets for your cloud provider.
Procedure
If you have not previously created installation manifest files, do so by running the following command:
$ openshift-install create manifests --dir <installation_directory>
where
<installation_directory>
is the directory in which the installation program creates files.Set a
$RELEASE_IMAGE
variable with the release image from your installation file by running the following command:$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
Extract the list of
CredentialsRequest
custom resources (CRs) from the OpenShift Container Platform release image by running the following command:$ oc adm release extract \ --from=$RELEASE_IMAGE \ --credentials-requests \ --included \1 --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \2 --to=<path_to_directory_for_credentials_requests> 3
- 1
- The
--included
parameter includes only the manifests that your specific cluster configuration requires. - 2
- Specify the location of the
install-config.yaml
file. - 3
- Specify the path to the directory where you want to store the
CredentialsRequest
objects. If the specified directory does not exist, this command creates it.
This command creates a YAML file for each
CredentialsRequest
object.Sample
CredentialsRequest
objectapiVersion: cloudcredential.openshift.io/v1 kind: CredentialsRequest metadata: name: <component_credentials_request> namespace: openshift-cloud-credential-operator ... spec: providerSpec: apiVersion: cloudcredential.openshift.io/v1 kind: AzureProviderSpec roleBindings: - role: Contributor ...
Create YAML files for secrets in the
openshift-install
manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in thespec.secretRef
for eachCredentialsRequest
object.Sample
CredentialsRequest
object with secretsapiVersion: cloudcredential.openshift.io/v1 kind: CredentialsRequest metadata: name: <component_credentials_request> namespace: openshift-cloud-credential-operator ... spec: providerSpec: apiVersion: cloudcredential.openshift.io/v1 kind: AzureProviderSpec roleBindings: - role: Contributor ... secretRef: name: <component_secret> namespace: <component_namespace> ...
Sample
Secret
objectapiVersion: v1 kind: Secret metadata: name: <component_secret> namespace: <component_namespace> data: azure_subscription_id: <base64_encoded_azure_subscription_id> azure_client_id: <base64_encoded_azure_client_id> azure_client_secret: <base64_encoded_azure_client_secret> azure_tenant_id: <base64_encoded_azure_tenant_id> azure_resource_prefix: <base64_encoded_azure_resource_prefix> azure_resourcegroup: <base64_encoded_azure_resourcegroup> azure_region: <base64_encoded_azure_region>
Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.
Additional resources
3.3.5. Configuring the cluster to use an internal CA
If the Azure Stack Hub environment is using an internal Certificate Authority (CA), update the cluster-proxy-01-config.yaml file
to configure the cluster to use the internal CA.
Prerequisites
-
Create the
install-config.yaml
file and specify the certificate trust bundle in.pem
format. - Create the cluster manifests.
Procedure
-
From the directory in which the installation program creates files, go to the
manifests
directory. Add
user-ca-bundle
to thespec.trustedCA.name
field.Example
cluster-proxy-01-config.yaml
fileapiVersion: config.openshift.io/v1 kind: Proxy metadata: creationTimestamp: null name: cluster spec: trustedCA: name: user-ca-bundle status: {}
-
Optional: Back up the
manifests/ cluster-proxy-01-config.yaml
file. The installation program consumes themanifests/
directory when you deploy the cluster.
3.3.6. Network configuration phases
There are two phases prior to OpenShift Container Platform installation where you can customize the network configuration.
- Phase 1
You can customize the following network-related fields in the
install-config.yaml
file before you create the manifest files:-
networking.networkType
-
networking.clusterNetwork
-
networking.serviceNetwork
networking.machineNetwork
For more information, see "Installation configuration parameters".
NoteSet the
networking.machineNetwork
to match the Classless Inter-Domain Routing (CIDR) where the preferred subnet is located.ImportantThe CIDR range
172.17.0.0/16
is reserved bylibVirt
. You cannot use any other CIDR range that overlaps with the172.17.0.0/16
CIDR range for networks in your cluster.
-
- Phase 2
-
After creating the manifest files by running
openshift-install create manifests
, you can define a customized Cluster Network Operator manifest with only the fields you want to modify. You can use the manifest to specify advanced network configuration.
During phase 2, you cannot override the values that you specified in phase 1 in the install-config.yaml
file. However, you can customize the network plugin during phase 2.
3.3.7. Specifying advanced network configuration
You can use advanced network configuration for your network plugin to integrate your cluster into your existing network environment.
You can specify advanced network configuration only before you install the cluster.
Customizing your network configuration by modifying the OpenShift Container Platform manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.
Prerequisites
-
You have created the
install-config.yaml
file and completed any modifications to it.
Procedure
Change to the directory that contains the installation program and create the manifests:
$ ./openshift-install create manifests --dir <installation_directory> 1
- 1
<installation_directory>
specifies the name of the directory that contains theinstall-config.yaml
file for your cluster.
Create a stub manifest file for the advanced network configuration that is named
cluster-network-03-config.yml
in the<installation_directory>/manifests/
directory:apiVersion: operator.openshift.io/v1 kind: Network metadata: name: cluster spec:
Specify the advanced network configuration for your cluster in the
cluster-network-03-config.yml
file, such as in the following example:Enable IPsec for the OVN-Kubernetes network provider
apiVersion: operator.openshift.io/v1 kind: Network metadata: name: cluster spec: defaultNetwork: ovnKubernetesConfig: ipsecConfig: mode: Full
-
Optional: Back up the
manifests/cluster-network-03-config.yml
file. The installation program consumes themanifests/
directory when you create the Ignition config files.
3.3.8. Cluster Network Operator configuration
The configuration for the cluster network is specified as part of the Cluster Network Operator (CNO) configuration and stored in a custom resource (CR) object that is named cluster
. The CR specifies the fields for the Network
API in the operator.openshift.io
API group.
The CNO configuration inherits the following fields during cluster installation from the Network
API in the Network.config.openshift.io
API group:
clusterNetwork
- IP address pools from which pod IP addresses are allocated.
serviceNetwork
- IP address pool for services.
defaultNetwork.type
-
Cluster network plugin.
OVNKubernetes
is the only supported plugin during installation.
You can specify the cluster network plugin configuration for your cluster by setting the fields for the defaultNetwork
object in the CNO object named cluster
.
3.3.8.1. Cluster Network Operator configuration object
The fields for the Cluster Network Operator (CNO) are described in the following table:
Field | Type | Description |
---|---|---|
|
|
The name of the CNO object. This name is always |
|
| A list specifying the blocks of IP addresses from which pod IP addresses are allocated and the subnet prefix length assigned to each individual node in the cluster. For example: spec: clusterNetwork: - cidr: 10.128.0.0/19 hostPrefix: 23 - cidr: 10.128.32.0/19 hostPrefix: 23 |
|
| A block of IP addresses for services. The OVN-Kubernetes network plugin supports only a single IP address block for the service network. For example: spec: serviceNetwork: - 172.30.0.0/14
You can customize this field only in the |
|
| Configures the network plugin for the cluster network. |
|
| The fields for this object specify the kube-proxy configuration. If you are using the OVN-Kubernetes cluster network plugin, the kube-proxy configuration has no effect. |
defaultNetwork object configuration
The values for the defaultNetwork
object are defined in the following table:
Field | Type | Description |
---|---|---|
|
|
Note OpenShift Container Platform uses the OVN-Kubernetes network plugin by default. OpenShift SDN is no longer available as an installation choice for new clusters. |
|
| This object is only valid for the OVN-Kubernetes network plugin. |
Configuration for the OVN-Kubernetes network plugin
The following table describes the configuration fields for the OVN-Kubernetes network plugin:
Field | Type | Description |
---|---|---|
|
| The maximum transmission unit (MTU) for the Geneve (Generic Network Virtualization Encapsulation) overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU. If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes.
If your cluster requires different MTU values for different nodes, you must set this value to |
|
|
The port to use for all Geneve packets. The default value is |
|
| Specify a configuration object for customizing the IPsec configuration. |
|
| Specifies a configuration object for IPv4 settings. |
|
| Specifies a configuration object for IPv6 settings. |
|
| Specify a configuration object for customizing network policy audit logging. If unset, the defaults audit log settings are used. |
|
| Optional: Specify a configuration object for customizing how egress traffic is sent to the node gateway. Note While migrating egress traffic, you can expect some disruption to workloads and service traffic until the Cluster Network Operator (CNO) successfully rolls out the changes. |
Field | Type | Description |
---|---|---|
| string |
If your existing network infrastructure overlaps with the
The default value is |
| string |
If your existing network infrastructure overlaps with the
The default value is |
Field | Type | Description |
---|---|---|
| string |
If your existing network infrastructure overlaps with the
The default value is |
| string |
If your existing network infrastructure overlaps with the
The default value is |
Field | Type | Description |
---|---|---|
| integer |
The maximum number of messages to generate every second per node. The default value is |
| integer |
The maximum size for the audit log in bytes. The default value is |
| integer | The maximum number of log files that are retained. |
| string | One of the following additional audit log targets:
|
| string |
The syslog facility, such as |
Field | Type | Description |
---|---|---|
|
|
Set this field to
This field has an interaction with the Open vSwitch hardware offloading feature. If you set this field to |
|
|
You can control IP forwarding for all traffic on OVN-Kubernetes managed interfaces by using the |
|
| Optional: Specify an object to configure the internal OVN-Kubernetes masquerade address for host to service traffic for IPv4 addresses. |
|
| Optional: Specify an object to configure the internal OVN-Kubernetes masquerade address for host to service traffic for IPv6 addresses. |
Field | Type | Description |
---|---|---|
|
|
The masquerade IPv4 addresses that are used internally to enable host to service traffic. The host is configured with these IP addresses as well as the shared gateway bridge interface. The default value is Important
For OpenShift Container Platform 4.17 and later versions, clusters use |
Field | Type | Description |
---|---|---|
|
|
The masquerade IPv6 addresses that are used internally to enable host to service traffic. The host is configured with these IP addresses as well as the shared gateway bridge interface. The default value is Important
For OpenShift Container Platform 4.17 and later versions, clusters use |
Field | Type | Description |
---|---|---|
|
| Specifies the behavior of the IPsec implementation. Must be one of the following values:
|
Example OVN-Kubernetes configuration with IPSec enabled
defaultNetwork: type: OVNKubernetes ovnKubernetesConfig: mtu: 1400 genevePort: 6081 ipsecConfig: mode: Full
3.3.9. Configuring hybrid networking with OVN-Kubernetes
You can configure your cluster to use hybrid networking with the OVN-Kubernetes network plugin. This allows a hybrid cluster that supports different node networking configurations.
This configuration is necessary to run both Linux and Windows nodes in the same cluster.
Prerequisites
-
You defined
OVNKubernetes
for thenetworking.networkType
parameter in theinstall-config.yaml
file. See the installation documentation for configuring OpenShift Container Platform network customizations on your chosen cloud provider for more information.
Procedure
Change to the directory that contains the installation program and create the manifests:
$ ./openshift-install create manifests --dir <installation_directory>
where:
<installation_directory>
-
Specifies the name of the directory that contains the
install-config.yaml
file for your cluster.
Create a stub manifest file for the advanced network configuration that is named
cluster-network-03-config.yml
in the<installation_directory>/manifests/
directory:$ cat <<EOF > <installation_directory>/manifests/cluster-network-03-config.yml apiVersion: operator.openshift.io/v1 kind: Network metadata: name: cluster spec: EOF
where:
<installation_directory>
-
Specifies the directory name that contains the
manifests/
directory for your cluster.
Open the
cluster-network-03-config.yml
file in an editor and configure OVN-Kubernetes with hybrid networking, as in the following example:Specify a hybrid networking configuration
apiVersion: operator.openshift.io/v1 kind: Network metadata: name: cluster spec: defaultNetwork: ovnKubernetesConfig: hybridOverlayConfig: hybridClusterNetwork: 1 - cidr: 10.132.0.0/14 hostPrefix: 23 hybridOverlayVXLANPort: 9898 2
- 1
- Specify the CIDR configuration used for nodes on the additional overlay network. The
hybridClusterNetwork
CIDR must not overlap with theclusterNetwork
CIDR. - 2
- Specify a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default
4789
port. For more information on this requirement, see the Microsoft documentation on Pod-to-pod connectivity between hosts is broken.
NoteWindows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom
hybridOverlayVXLANPort
value because this Windows server version does not support selecting a custom VXLAN port.-
Save the
cluster-network-03-config.yml
file and quit the text editor. -
Optional: Back up the
manifests/cluster-network-03-config.yml
file. The installation program deletes themanifests/
directory when creating the cluster.
For more information about using Linux and Windows nodes in the same cluster, see Understanding Windows container workloads.
3.3.10. Deploying the cluster
You can install OpenShift Container Platform on a compatible cloud platform.
You can run the create cluster
command of the installation program only once, during initial installation.
Prerequisites
- You have configured an account with the cloud platform that hosts your cluster.
- You have the OpenShift Container Platform installation program and the pull secret for your cluster.
- You have verified that the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.
Procedure
Change to the directory that contains the installation program and initialize the cluster deployment:
$ ./openshift-install create cluster --dir <installation_directory> \ 1 --log-level=info 2
Verification
When the cluster deployment completes successfully:
-
The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the
kubeadmin
user. -
Credential information also outputs to
<installation_directory>/.openshift_install.log
.
Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.
Example output
... INFO Install complete! INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig' INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com INFO Login to the console with user: "kubeadmin", and password: "password" INFO Time elapsed: 36m22s
-
The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending
node-bootstrapper
certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information. - It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.
3.3.11. Logging in to the cluster by using the CLI
You can log in to your cluster as a default system user by exporting the cluster kubeconfig
file. The kubeconfig
file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.
Prerequisites
- You deployed an OpenShift Container Platform cluster.
-
You installed the
oc
CLI.
Procedure
Export the
kubeadmin
credentials:$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
- 1
- For
<installation_directory>
, specify the path to the directory that you stored the installation files in.
Verify you can run
oc
commands successfully using the exported configuration:$ oc whoami
Example output
system:admin
3.3.12. Logging in to the cluster by using the web console
The kubeadmin
user exists by default after an OpenShift Container Platform installation. You can log in to your cluster as the kubeadmin
user by using the OpenShift Container Platform web console.
Prerequisites
- You have access to the installation host.
- You completed a cluster installation and all cluster Operators are available.
Procedure
Obtain the password for the
kubeadmin
user from thekubeadmin-password
file on the installation host:$ cat <installation_directory>/auth/kubeadmin-password
NoteAlternatively, you can obtain the
kubeadmin
password from the<installation_directory>/.openshift_install.log
log file on the installation host.List the OpenShift Container Platform web console route:
$ oc get routes -n openshift-console | grep 'console-openshift'
NoteAlternatively, you can obtain the OpenShift Container Platform route from the
<installation_directory>/.openshift_install.log
log file on the installation host.Example output
console console-openshift-console.apps.<cluster_name>.<base_domain> console https reencrypt/Redirect None
-
Navigate to the route detailed in the output of the preceding command in a web browser and log in as the
kubeadmin
user.
Additional resources