Chapter 9. Remote worker nodes on the network edge

Adding remote worker nodes to a cluster involves some additional considerations.

All nodes send heartbeats to the Kubernetes Controller Manager Operator (kube controller) in the OpenShift Container Platform cluster every 10 seconds. If the cluster does not receive heartbeats from a node, OpenShift Container Platform responds using several default mechanisms.

OpenShift Container Platform is designed to be resilient to network partitions and other disruptions. You can mitigate some of the more common disruptions, such as interruptions from software upgrades, network splits, and routing issues. Mitigation strategies include ensuring that pods on remote worker nodes request the correct amount of CPU and memory resources, configuring an appropriate replication policy, using redundancy across zones, and using Pod Disruption Budgets on workloads.

If the kube controller loses contact with a node after a configured period, the node controller on the control plane updates the node health to Unhealthy and marks the node Ready condition as Unknown. In response, the scheduler stops scheduling pods to that node. The on-premise node controller adds a node.kubernetes.io/unreachable taint with a NoExecute effect to the node and schedules pods on the node for eviction after five minutes, by default.

If a workload controller, such as a Deployment object or StatefulSet object, is directing traffic to pods on the unhealthy node and other nodes can reach the cluster, OpenShift Container Platform routes the traffic away from the pods on the node. Nodes that cannot reach the cluster do not get updated with the new traffic routing. As a result, the workloads on those nodes might continue to attempt to reach the unhealthy node.

You can mitigate the effects of connection loss by:

For more information on using these objects in a cluster with remote worker nodes, see About remote worker node strategies.

If a remote worker node loses power or restarts ungracefully, OpenShift Container Platform responds using several default mechanisms.

If the Kubernetes Controller Manager Operator (kube controller) loses contact with a node after a configured period, the control plane updates the node health to Unhealthy and marks the node Ready condition as Unknown. In response, the scheduler stops scheduling pods to that node. The on-premise node controller adds a node.kubernetes.io/unreachable taint with a NoExecute effect to the node and schedules pods on the node for eviction after five minutes, by default.

On the node, the pods must be restarted when the node recovers power and reconnects with the control plane.

After the node restarts, the kubelet also restarts and attempts to restart the pods that were scheduled on the node. If the connection to the control plane takes longer than the default five minutes, the control plane cannot update the node health and remove the node.kubernetes.io/unreachable taint. On the node, the kubelet terminates any running pods. When these conditions are cleared, the scheduler can start scheduling pods to that node.

You can mitigate the effects of power loss by:

For more information on using these objects in a cluster with remote worker nodes, see About remote worker node strategies.

If the cluster administrator has performed latency tests for platform verification, they can discover the need to adjust the operation of the cluster to ensure stability in cases of high latency. The cluster administrator needs to change only one parameter, recorded in a file, which controls four parameters affecting how supervisory processes read status and interpret the health of the cluster. Changing only the one parameter provides cluster tuning in an easy, supportable manner.

The Kubelet process provides the starting point for monitoring cluster health. The Kubelet sets status values for all nodes in the OpenShift Container Platform cluster. The Kubernetes Controller Manager (kube controller) reads the status values every 10 seconds, by default. If the kube controller cannot read a node status value, it loses contact with that node after a configured period. The default behavior is:

This behavior can cause problems if your network is prone to latency issues, especially if you have nodes at the network edge. In some cases, the Kubernetes Controller Manager might not receive an update from a healthy node due to network latency. The Kubelet evicts pods from the node even though the node is healthy.

To avoid this problem, you can use worker latency profiles to adjust the frequency that the Kubelet and the Kubernetes Controller Manager wait for status updates before taking action. These adjustments help to ensure that your cluster runs properly if network latency between the control plane and the worker nodes is not optimal.

These worker latency profiles contain three sets of parameters that are predefined with carefully tuned values to control the reaction of the cluster to increased latency. There is no need to experimentally find the best values manually.

You can configure worker latency profiles when installing a cluster or at any time you notice increased latency in your cluster network.

If you use remote worker nodes, consider which objects to use to run your applications.

It is recommended to use daemon sets or static pods based on the behavior you want in the event of network issues or power loss. In addition, you can use Kubernetes zones and tolerations to control or avoid pod evictions if the control plane cannot reach remote worker nodes.

When the control plane cannot reach a node, the node controller, by default, applies node.kubernetes.io/unreachable taints and evicts pods at a rate of 0.1 nodes per second. However, in a cluster that uses Kubernetes zones, pod eviction behavior is altered.

If a zone is fully disrupted, where all nodes in the zone have a Ready condition that is False or Unknown, the control plane does not apply the node.kubernetes.io/unreachable taint to the nodes in that zone.

For partially disrupted zones, where more than 55% of the nodes have a False or Unknown condition, the pod eviction rate is reduced to 0.01 nodes per second. Nodes in smaller clusters, with fewer than 50 nodes, are not tainted. Your cluster must have more than three zones for these behavior to take effect.

You assign a node to a specific zone by applying the topology.kubernetes.io/region label in the node specification.

kind: Node
apiVersion: v1
metadata:
  labels:
    topology.kubernetes.io/region=east

You can adjust the amount of time that the kubelet checks the state of each node.

To set the interval that affects the timing of when the on-premise node controller marks nodes with the Unhealthy or Unreachable condition, create a KubeletConfig object that contains the node-status-update-frequency and node-status-report-frequency parameters.

The kubelet on each node determines the node status as defined by the node-status-update-frequency setting and reports that status to the cluster based on the node-status-report-frequency setting. By default, the kubelet determines the pod status every 10 seconds and reports the status every minute. However, if the node state changes, the kubelet reports the change to the cluster immediately. OpenShift Container Platform uses the node-status-report-frequency setting only when the Node Lease feature gate is enabled, which is the default state in OpenShift Container Platform clusters. If the Node Lease feature gate is disabled, the node reports its status based on the node-status-update-frequency setting.

apiVersion: machineconfiguration.openshift.io/v1
kind: KubeletConfig
metadata:
  name: disable-cpu-units
spec:
  machineConfigPoolSelector:
    matchLabels:
      machineconfiguration.openshift.io/role: worker 1
  kubeletConfig:
    node-status-update-frequency: 2
      - "10s"
    node-status-report-frequency: 3
      - "1m"

The node-status-update-frequency parameter works with the node-monitor-grace-period parameter.

A taint with the NoExecute effect affects pods that are running on the node in the following ways:

You can delay or avoid pod eviction by configuring pods tolerations with the NoExecute effect for the node.kubernetes.io/unreachable and node.kubernetes.io/not-ready taints.

...
tolerations:
- key: "node.kubernetes.io/unreachable"
  operator: "Exists"
  effect: "NoExecute" 1
- key: "node.kubernetes.io/not-ready"
  operator: "Exists"
  effect: "NoExecute" 2
  tolerationSeconds: 600 3
...

stateful sets do not get restarted when there is an outage. The pods remain in the terminating state until the control plane can acknowledge that the pods are terminated.

To avoid scheduling a to a node that does not have access to the same type of persistent storage, OpenShift Container Platform cannot migrate pods that require persistent volumes to other zones in the case of network separation.