このコンテンツは選択した言語では利用できません。

A.3. Updated Packages

NetworkManager-0.7.0-3.el5 - NetworkManager-0.7.0-9.el5

Group: System Environment/Base
Summary: Network connection manager and user applications
Description: NetworkManager attempts to keep an active network connection available at all times. It is intended only for the desktop use-case, and is not intended for usage on servers. The point of NetworkManager is to make networking configuration and setup as painless and automatic as possible. If using DHCP, NetworkManager is intended to replace default routes, obtain IP addresses from a DHCP server, and change nameservers whenever it sees fit.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

OpenIPMI-2.0.6-11.el5 - OpenIPMI-2.0.16-5.el5

Group: System Environment/Base
Summary: OpenIPMI (Intelligent Platform Management Interface) library and tools
Description: The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI). This package contains the tools of the OpenIPMI project.
Added Dependencies:
- desktop-file-utils
- tcl-devel
- tkinter
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

acpid-1.0.4-7.el5 - acpid-1.0.4-9.el5

Group: System Environment/Daemons
Summary: ACPI Event Daemon
Description: acpid is a daemon that dispatches ACPI events to user-space programs.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

aide-0.13.1-2.0.4.el5 - aide-0.13.1-4.el5

Group: Applications/System
Summary: Intrusion detection environment
Description: AIDE (Advanced Intrusion Detection Environment) is a file integrity checker and intrusion detection program.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

amanda-2.5.0p2-4 - amanda-2.5.0p2-8.el5

Group: Applications/System
Summary: A network-capable tape backup solution.
Description: AMANDA, the Advanced Maryland Automatic Network Disk Archiver, is a backup system that allows the administrator of a LAN to set up a single master backup server to back up multiple hosts to one or more tape drives or disk files. AMANDA uses native dump and/or GNU tar facilities and can back up a large number of workstations running multiple versions of Unix. Newer versions of AMANDA (including this version) can use SAMBA to back up Microsoft(TM) Windows95/NT hosts. The amanda package contains the core AMANDA programs and will need to be installed on both AMANDA clients and AMANDA servers. Note that you will have to install the amanda-client and/or amanda-server packages as well.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

anaconda-11.1.2.168-1 - anaconda-11.1.2.195-1

Group: Applications/System
Summary: Graphical system installer
Description: The anaconda package contains the program which was used to install your system. These files are of little use on an already installed system.
Added Dependencies:
- iscsi-initiator-utils >= 6.2.0.871-0.0
- libdhcp-devel >= 1.20-10
- libdhcp6client >= 1.0.10-17
Removed Dependencies:
- iscsi-initiator-utils >= 6.2.0.868-0.9
- libdhcp-devel >= 1.20-5
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

apr-1.2.7-11 - apr-1.2.7-11.el5_3.1

Group: System Environment/Libraries
Summary: Apache Portable Runtime library
Description: The mission of the Apache Portable Runtime (APR) is to provide a free library of C data structures and routines, forming a system portability layer to as many operating systems as possible, including Unices, MS Win32, BeOS and OS/2.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

apr-util-1.2.7-7.el5 - apr-util-1.2.7-7.el5_3.2

Group: System Environment/Libraries
Summary: Apache Portable Runtime Utility library
Description: The mission of the Apache Portable Runtime (APR) is to provide a free library of C data structures and routines. This library contains additional utility interfaces for APR; including support for XML, LDAP, database interfaces, URI parsing and more.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

aspell-nl-0.1e-1.fc6 - aspell-nl-0.1e-2.el5

Group: Applications/Text
Summary: Dutch dictionaries for Aspell
Description: Provides the word list/dictionaries for the following: Dutch
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

audit-1.7.7-6.el5 - audit-1.7.13-2.el5

Group: System Environment/Daemons
Summary: User space tools for 2.6 kernel auditing
Description: The audit package contains the user space utilities for storing and searching the audit records generate by the audit subsystem in the Linux 2.6 kernel.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

authconfig-5.3.21-5.el5 - authconfig-5.3.21-6.el5

Group: System Environment/Base
Summary: Command line tool for setting up authentication from network services
Description: Authconfig is a command line utility which can configure a workstation to use shadow (more secure) passwords. Authconfig can also configure a system to be a client for certain networked user information and authentication schemes.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

authd-1.4.3-9 - authd-1.4.3-14

Group: System Environment/Daemons
Summary: a RFC 1413 ident protocol daemon
Description: authd is a small and fast RFC 1413 ident protocol daemon with both xinetd server and interactive modes that supports IPv6 and IPv4 as well as the more popular features of pidentd.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

autofs-5.0.1-0.rc2.102 - autofs-5.0.1-0.rc2.131.el5

Group: System Environment/Daemons
Summary: A tool for automatically mounting and unmounting filesystems.
Description: autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

avahi-0.6.16-1.el5 - avahi-0.6.16-6.el5

Group: System Environment/Base
Summary: Local network service discovery
Description: Avahi is a system which facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

bind-9.3.4-10.P1.el5 - bind-9.3.6-4.P1.el5

Group: System Environment/Daemons
Summary: The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server.
Description: BIND (Berkeley Internet Name Domain) is an implementation of the DNS (Domain Name System) protocols. BIND includes a DNS server (named), which resolves host names to IP addresses; a resolver library (routines for applications to use when interfacing with DNS); and tools for verifying that the DNS server is operating properly.
No added dependencies
Removed Dependencies:
- glibc-kernheaders >= 2.4-7.10
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

binutils-2.17.50.0.6-9.el5 - binutils-2.17.50.0.6-12.el5

Group: Development/Tools
Summary: A GNU collection of binary utilities.
Description: Binutils is a collection of binary utilities, including ar (for creating, modifying and extracting from archives), as (a family of GNU assemblers), gprof (for displaying call graph profile data), ld (the GNU linker), nm (for listing symbols from object files), objcopy (for copying and translating object files), objdump (for displaying information from object files), ranlib (for generating an index for the contents of an archive), size (for listing the section sizes of an object or archive file), strings (for listing printable strings from files), strip (for discarding symbols), and addr2line (for converting addresses to file and line).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

busybox-1.2.0-4.el5 - busybox-1.2.0-7.el5

Group: System Environment/Shells
Summary: Statically linked binary providing simplified versions of system commands
Description: Busybox is a single binary which includes versions of a large number of system commands, including a shell. This package can be very useful for recovering from certain types of system failures, particularly those involving broken shared libraries.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cman-2.0.98-1.el5 - cman-2.0.115-1.el5

Group: System Environment/Base
Summary: cman - The Cluster Manager
Description: cman - The Cluster Manager
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cmirror-1.1.36-1.el5 - cmirror-1.1.39-2.el5

Group: System Environment/Base
Summary: cmirror - The Cluster Mirror Package
Description: cmirror - Cluster Mirroring
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cmirror-kmod-0.1.21-10.el5 - cmirror-kmod-0.1.22-1.el5

Group: System Environment/Kernel
Summary: cmirror kernel modules
Description: cmirror-kmod - The Cluster Mirror kernel modules
Added Dependencies:
- kernel-devel-ia64 = 2.6.18-159.el5
- kernel-xen-devel-ia64 = 2.6.18-159.el5
Removed Dependencies:
- kernel-devel-ia64 = 2.6.18-128.el5
- kernel-xen-devel-ia64 = 2.6.18-128.el5
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

conga-0.12.1-7.el5 - conga-0.12.2-6.el5

Group: System Environment/Base
Summary: Remote Management System
Description: Conga is a project developing management system for remote stations. It consists of luci, https frontend, and ricci, secure daemon that dispatches incoming messages to underlying management modules.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

coreutils-5.97-19.el5 - coreutils-5.97-23.el5

Group: System Environment/Base
Summary: The GNU core utilities: a set of tools commonly used in shell scripts
Description: These are the GNU core utilities. This package is the combination of the old GNU fileutils, sh-utils, and textutils packages.
Added Dependencies:
- libattr-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cpio-2.6-20 - cpio-2.6-23.el5

Group: Applications/Archiving
Summary: A GNU archiving program.
Description: GNU cpio copies files into or out of a cpio or tar archive. Archives are files which contain a collection of other files plus information about them, such as their file name, owner, timestamps, and access permissions. The archive can be another file on the disk, a magnetic tape, or a pipe. GNU cpio supports the following archive formats: binary, old ASCII, new ASCII, crc, HPUX binary, HPUX old ASCII, old tar and POSIX.1 tar. By default, cpio creates binary format archives, so that they are compatible with older cpio programs. When it is extracting files from archives, cpio automatically recognizes which kind of archive it is reading and can read archives created on machines with a different byte-order. Install cpio if you need a program to manage file archives.
Added Dependencies:
- rmt
- rsh
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cpuspeed-1.2.1-5.el5 - cpuspeed-1.2.1-8.el5

Group: System Environment/Base
Summary: CPU frequency adjusting daemon
Description: cpuspeed is a daemon that dynamically changes the speed of your processor(s) depending upon its current workload if it is capable (needs Intel Speedstep, AMD PowerNow!, or similar support). This package also supports enabling cpu frequency scaling via in-kernel governors on Intel Centrino and AMD Athlon64/Opteron platforms.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

crash-4.0-7.2.3 - crash-4.0-8.9.1.el5

Group: Development/Debuggers
Summary: crash utility for live systems; netdump, diskdump, kdump, LKCD or mcore dumpfiles
Description: The core analysis suite is a self-contained tool that can be used to investigate either live systems, kernel core dumps created from the netdump, diskdump and kdump packages from Red Hat Linux, the mcore kernel patch offered by Mission Critical Linux, or the LKCD kernel patch.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cryptsetup-luks-1.0.3-4.el5 - cryptsetup-luks-1.0.3-5.el5

Group: Applications/System
Summary: A utility for setting up encrypted filesystems
Description: This package contains cryptsetup, a utility for setting up encrypted filesystems using Device Mapper and the dm-crypt target.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cscope-15.5-15.fc6.1 - cscope-15.5-15.1.el5_3.1

Group: Development/Tools
Summary: C source code tree search and browse tool
Description: cscope is a mature, ncurses based, C source code tree browsing tool. It allows users to search large source code bases for variables, functions, macros, etc, as well as perform general regex and plain text searches. Results are returned in lists, from which the user can select individual matches for use in file editing.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cups-1.3.7-8.el5 - cups-1.3.7-11.el5

Group: System Environment/Daemons
Summary: Common Unix Printing System
Description: The Common UNIX Printing System provides a portable printing layer for UNIX® operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS provides the System V and Berkeley command-line interfaces.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

curl-7.15.5-2.el5 - curl-7.15.5-2.1.el5_3.5

Group: Applications/Internet
Summary: A utility for getting files from remote servers (FTP, HTTP, and others).
Description: cURL is a tool for getting files from FTP, HTTP, Gopher, Telnet, and Dict servers, using any of the supported protocols. cURL is designed to work without user interaction or any kind of interactivity. cURL offers many useful capabilities, like proxy support, user authentication, FTP upload, HTTP post, and file transfer resume.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cvs-1.11.22-5.el5 - cvs-1.11.22-7.el5

Group: Development/Tools
Summary: A version control system.
Description: CVS (Concurrent Versions System) is a version control system that can record the history of your files (usually, but not always, source code). CVS only stores the differences between versions, instead of every version of every file you have ever created. CVS also keeps a log of who, when, and why changes occurred. CVS is very helpful for managing releases and controlling the concurrent editing of source files among multiple authors. Instead of providing version control for a collection of files in a single directory, CVS provides version control for a hierarchical collection of directories consisting of revision controlled files. These directories and files can then be combined together to form a software release.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cyrus-imapd-2.3.7-2.el5 - cyrus-imapd-2.3.7-7.el5

Group: System Environment/Daemons
Summary: A high-performance mail server with IMAP, POP3, NNTP and SIEVE support
Description: The cyrus-imapd package contains the core of the Cyrus IMAP server. It is a scaleable enterprise mail system designed for use from small to large enterprise environments using standards-based internet mail technologies. A full Cyrus IMAP implementation allows a seamless mail and bulletin board environment to be set up across multiple servers. It differs from other IMAP server implementations in that it is run on "sealed" servers, where users are not normally permitted to log in and have no system account on the server. The mailbox database is stored in parts of the filesystem that are private to the Cyrus IMAP server. All user access to mail is through software using the IMAP, POP3 or KPOP protocols. It also includes support for virtual domains, NNTP, mailbox annotations, and much more. The private mailbox database design gives the server large advantages in efficiency, scalability and administratability. Multiple concurrent read/write connections to the same mailbox are permitted. The server supports access control lists on mailboxes and storage quotas on mailbox hierarchies. The Cyrus IMAP server supports the IMAP4rev1 protocol described in RFC 3501. IMAP4rev1 has been approved as a proposed standard. It supports any authentication mechanism available from the SASL library, imaps/pop3s/nntps (IMAP/POP3/NNTP encrypted using SSL and TLSv1) can be used for security. The server supports single instance store where possible when an email message is addressed to multiple recipients, SIEVE provides server side email filtering.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

cyrus-sasl-2.1.22-4 - cyrus-sasl-2.1.22-5.el5

Group: System Environment/Libraries
Summary: The Cyrus SASL library.
Description: The cyrus-sasl package contains the Cyrus implementation of SASL. SASL is the Simple Authentication and Security Layer, a method for adding authentication support to connection-based protocols.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dapl-2.0.13-4.el5 - dapl-2.0.19-2.el5

Group: System Environment/Libraries
Summary: Library providing access to the DAT 1.2 and 2.0 APIs
Description: libdat and libdapl provide a userspace implementation of the DAT 1.2 and 2.0 API that is built to natively support InfiniBand/iWARP network technology.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4
- librdmacm-devel >= 1.0.8-5
Removed Dependencies:
- libibverbs-devel >= 1.1
- librdmacm-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

db4-4.3.29-9.fc6 - db4-4.3.29-10.el5

Group: System Environment/Libraries
Summary: The Berkeley DB database library (version 4) for C.
Description: The Berkeley Database (Berkeley DB) is a programmatic toolkit that provides embedded database support for both traditional and client/server applications. The Berkeley DB includes B+tree, Extended Linear Hashing, Fixed and Variable-length record access methods, transactions, locking, logging, shared memory caching, and database recovery. The Berkeley DB supports C, C++, Java, and Perl APIs. It is used by many applications, including Python and Perl, so this should be installed on all systems.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

device-mapper-1.02.28-2.el5 - device-mapper-1.02.32-1.el5

Group: System Environment/Base
Summary: device mapper library
Description: This package contains the supporting userspace files (libdevmapper and dmsetup) for the device-mapper.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

device-mapper-multipath-0.4.7-23.el5 - device-mapper-multipath-0.4.7-30.el5

Group: System Environment/Base
Summary: Tools to manage multipath devices using device-mapper.
Description: device-mapper-multipath provides tools to manage multipath devices by instructing the device-mapper multipath kernel module what to do. The tools are : * multipath : Scan the system for multipath devices and assemble them. * multipathd : Detects when paths fail and execs multipath to update things.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dhcp-3.0.5-18.el5 - dhcp-3.0.5-21.el5

Group: System Environment/Daemons
Summary: DHCP (Dynamic Host Configuration Protocol) server and relay agent.
Description: DHCP (Dynamic Host Configuration Protocol) is a protocol which allows individual devices on an IP network to get their own network configuration information (IP address, subnetmask, broadcast address, etc.) from a DHCP server. The overall purpose of DHCP is to make it easier to administer a large network. The dhcp package includes the ISC DHCP service and relay agent. To use DHCP on your network, install a DHCP service (or relay agent), and on clients run a DHCP client daemon. The dhcp package provides the ISC DHCP service and relay agent.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dhcpv6-1.0.10-16.el5 - dhcpv6-1.0.10-17.el5

Group: System Environment/Daemons
Summary: DHCPv6 - DHCP server and client for IPv6
Description: Implements the Dynamic Host Configuration Protocol (DHCP) for Internet Protocol version 6 (IPv6) networks in accordance with RFC 3315: Dynamic Host Configuration Protocol for IPv6 (DHCPv6). Consists of dhcp6s(8), the server DHCP daemon, and dhcp6r(8), the DHCPv6 relay agent. Install this package if you want to support dynamic configuration of IPv6 addresses and parameters on your IPv6 network.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dmidecode-2.7-1.28.2.el5 - dmidecode-2.9-1.el5

Group: System Environment/Base
Summary: Tool to analyse BIOS DMI data.
Description: dmidecode reports information about x86 hardware as described in the system BIOS according to the SMBIOS/DMI standard. This information typically includes system manufacturer, model name, serial number, BIOS version, asset tag as well as a lot of other details of varying level of interest and reliability depending on the manufacturer. This will often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel, USB).
Added Dependencies:
- automake
Removed Dependencies:
- /usr/bin/aclocal
- /usr/bin/autoconf
- /usr/bin/automake
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dmraid-1.0.0.rc13-33.el5 - dmraid-1.0.0.rc13-53.el5

Group: System Environment/Base
Summary: dmraid (Device-mapper RAID tool and library)
Description: DMRAID supports RAID device discovery, RAID set activation and display of properties for ATARAID on Linux >= 2.4 using device-mapper.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dos2unix-3.1-27.1 - dos2unix-3.1-27.2.el5

Group: Applications/Text
Summary: Text file format converter
Description: Dos2unix converts DOS or MAC text files to UNIX format.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dump-0.4b41-2.fc6 - dump-0.4b41-4.el5

Group: Applications/Archiving
Summary: Programs for backing up and restoring ext2/ext3 filesystems
Description: The dump package contains both dump and restore. Dump examines files in a filesystem, determines which ones need to be backed up, and copies those files to a specified disk, tape, or other storage medium. The restore command performs the inverse function of dump; it can restore a full backup of a filesystem. Subsequent incremental backups can then be layered on top of the full backup. Single files and directory subtrees may also be restored from full or partial backups. Install dump if you need a system for both backing up filesystems and restoring filesystems after backups.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

dvd+rw-tools-7.0-0.el5.3 - dvd+rw-tools-7.0-1.el5

Group: Applications/Multimedia
Summary: Toolchain to master DVD+RW/+R media
Description: Collection of tools to master DVD+RW/+R media. For further information see http://fy.chalmers.se/~appro/linux/DVD+RW/.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

e2fsprogs-1.39-20.el5 - e2fsprogs-1.39-23.el5

Group: System Environment/Base
Summary: Utilities for managing the second and third extended (ext2/ext3) filesystems
Description: The e2fsprogs package contains a number of utilities for creating, checking, modifying, and correcting any inconsistencies in second and third extended (ext2/ext3) filesystems. E2fsprogs contains e2fsck (used to repair filesystem inconsistencies after an unclean shutdown), mke2fs (used to initialize a partition to contain an empty ext2 filesystem), debugfs (used to examine the internal structure of a filesystem, to manually repair a corrupted filesystem, or to create test cases for e2fsck), tune2fs (used to modify filesystem parameters), and most of the other core ext2fs filesystem utilities. You should install the e2fsprogs package if you need to manage the performance of an ext2 and/or ext3 filesystem.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

e4fsprogs-1.41.1-2.el5 - e4fsprogs-1.41.5-3.el5

Group: System Environment/Base
Summary: Utilities for managing the fourth extended (ext4) filesystem
Description: The e4fsprogs package contains a number of utilities for creating, checking, modifying, and correcting any inconsistencies in the fourth extended (ext4) filesystem. E4fsprogs contains e4fsck (used to repair filesystem inconsistencies after an unclean shutdown), mke4fs (used to initialize a partition to contain an empty ext4 filesystem), debugfs (used to examine the internal structure of a filesystem, to manually repair a corrupted filesystem, or to create test cases for e4fsck), tune4fs (used to modify filesystem parameters), and most of the other core ext4fs filesystem utilities. Please note that "e4fsprogs" simply contains renamed static binaries from the equivalent upstream e2fsprogs release; it is packaged this way for Red Hat Enterprise Linux 5 to ensure that the many changes included for ext4 do not destabilize the core e2fsprogs in RHEL5. You should install the e4fsprogs package if you need to manage the performance of an ext4 filesystem.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ecryptfs-utils-56-8.el5 - ecryptfs-utils-75-5.el5

Group: System Environment/Base
Summary: The eCryptfs mount helper and support libraries
Description: eCryptfs is a stacked cryptographic filesystem that ships in the Linux kernel. This package provides the mount helper and supporting libraries to perform key management and mount functions. Install ecryptfs-utils if you would like to mount eCryptfs.
Added Dependencies:
- nss-devel
- python
- python-devel
- trousers-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

efax-0.9-27.2.1 - efax-0.9-28.el5

Group: Applications/Communications
Summary: A program for faxing using a Class 1, 2 or 2.0 fax modem.
Description: Efax is a small ANSI C/POSIX program that sends and receives faxes using any Class 1, 2 or 2.0 fax modem. You need to install efax if you want to send faxes and you have a Class 1, 2 or 2.0 fax modem.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

esc-1.0.0-39.el5 - esc-1.1.0-9.el5

Group: Applications/Internet
Summary: Enterprise Security Client Smart Card Client
Description: Enterprise Security Client allows the user to enroll and manage their cryptographic smartcards.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ethtool-6-2.el5 - ethtool-6-3.el5

Group: Applications/System
Summary: Ethernet settings tool for PCI ethernet cards
Description: This utility allows querying and changing of ethernet card settings, such as speed, port, autonegotiation, and PCI locations.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

evince-0.6.0-8.el5 - evince-0.6.0-9.el5

Group: Applications/Publishing
Summary: Document viewer
Description: evince is a GNOME-based document viewer.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

evolution-data-server-1.12.3-6.el5_2.3 - evolution-data-server-1.12.3-18.el5

Group: System Environment/Libraries
Summary: Backend data server for Evolution
Description: The evolution-data-server package provides a unified backend for programs that work with contacts, tasks, and calendar information. It was originally developed for Evolution (hence the name), but is now used by other packages.
Added Dependencies:
- libXau-devel
- xorg-x11-proto-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

file-4.17-15 - file-4.17-15.el5_3.1

Group: Applications/File
Summary: A utility for determining file types.
Description: The file command is used to identify a particular file according to the type of data contained by the file. File can identify many different file types, including ELF binaries, system libraries, RPM packages, and different graphics formats. You should install the file package, since the file command is such a useful utility.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

findutils-4.2.27-5.el5 - findutils-4.2.27-6.el5

Group: Applications/File
Summary: The GNU versions of find utilities (find and xargs).
Description: The findutils package contains programs which will help you locate files on your system. The find utility searches through a hierarchy of directories looking for files which match a certain set of criteria (such as a filename pattern). The xargs utility builds and executes command lines from standard input arguments (usually lists of file names generated by the find command). You should install findutils because it includes tools that are very useful for finding things on your system.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

fipscheck-1.0.3-1.el5 - fipscheck-1.2.0-1.el5

Group: System Environment/Libraries
Summary: A library for integrity verification of FIPS validated modules
Description: FIPSCheck is a library for integrity verification of FIPS validated modules. The package also provides helper binaries for creation and verification of the HMAC-SHA256 checksum files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

firefox-3.0.5-1.el5_2 - firefox-3.0.12-1.el5_3

Group: Applications/Internet
Summary: Mozilla Firefox Web browser
Description: Mozilla Firefox is an open-source web browser, designed for standards compliance, performance and portability.
Added Dependencies:
- xulrunner-devel >= 1.9.0.12-1
- xulrunner-devel-unstable >= 1.9.0.12-1
Removed Dependencies:
- xulrunner-devel >= 1.9.0.5-1
- xulrunner-devel-unstable >= 1.9.0.5-1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

foomatic-3.0.2-38.1.el5 - foomatic-3.0.2-38.3.el5

Group: System Environment/Libraries
Summary: Foomatic printer database.
Description: Foomatic is a comprehensive, spooler-independent database of printers, printer drivers, and driver descriptions. It contains utilities to generate driver description files and printer queues for CUPS, LPD, LPRng, and PDQ using the database. There is also the possibility to read the PJL options out of PJL-capable laser printers and take them into account at the driver description file generation. There are spooler-independent command line interfaces to manipulate queues (foomatic-configure) and to print files/manipulate jobs (foomatic printjob). The site http://www.linuxprinting.org/ is based on this database.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

freetype-2.2.1-20.el5_2 - freetype-2.2.1-21.el5_3

Group: System Environment/Libraries
Summary: A free and portable font rendering engine
Description: The FreeType engine is a free and portable font rendering engine, developed to provide advanced font support for a variety of platforms and environments. FreeType is a library which can open and manages font files as well as efficiently load, hint and render individual glyphs. FreeType is not a font server or a complete text-rendering library.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gcc-4.1.2-44.el5 - gcc-4.1.2-46.el5

Group: Development/Languages
Summary: Various compilers (C, C++, Objective-C, Java, ...)
Description: The gcc package contains the GNU Compiler Collection version 4.1. You'll need this package in order to compile C code.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gdb-6.8-27.el5 - gdb-6.8-37.el5

Group: Development/Debuggers
Summary: A GNU source-level debugger for C, C++, Java and other languages
Description: GDB, the GNU debugger, allows you to debug programs written in C, C++, Java, and other languages, by executing them in a controlled fashion and printing their data.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gdm-2.16.0-46.el5 - gdm-2.16.0-56.el5

Group: User Interface/X
Summary: The GNOME Display Manager.
Description: Gdm (the GNOME Display Manager) is a highly configurable reimplementation of xdm, the X Display Manager. Gdm allows you to log into your system with the X Window System running and supports running several different X sessions on your local machine at the same time.
Added Dependencies:
- tcp_wrappers
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gfs-kmod-0.1.31-3.el5 - gfs-kmod-0.1.34-2.el5

Group: System Environment/Kernel
Summary: gfs kernel modules
Description: gfs - The Global File System is a symmetric, shared-disk, cluster file system.
Added Dependencies:
- kernel-devel-ia64 = 2.6.18-159.el5
- kernel-xen-devel-ia64 = 2.6.18-159.el5
Removed Dependencies:
- kernel-devel-ia64 = 2.6.18-128.el5
- kernel-xen-devel-ia64 = 2.6.18-128.el5
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gfs-utils-0.1.18-1.el5 - gfs-utils-0.1.20-1.el5

Group: System Environment/Kernel
Summary: Utilities for managing the global filesystem (GFS)
Description: The gfs-utils package contains a number of utilities for creating, checking, modifying, and correcting any inconsistencies in GFS filesystems.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gfs2-utils-0.1.53-1.el5 - gfs2-utils-0.1.62-1.el5

Group: System Environment/Kernel
Summary: Utilities for managing the global filesystem (GFS)
Description: The gfs2-utils package contains a number of utilities for creating, checking, modifying, and correcting any inconsistencies in GFS filesystems.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ghostscript-8.15.2-9.4.el5 - ghostscript-8.15.2-9.11.el5

Group: Applications/Publishing
Summary: A PostScript(TM) interpreter and renderer.
Description: Ghostscript is a set of software that provides a PostScript(TM) interpreter, a set of C procedures (the Ghostscript library, which implements the graphics capabilities in the PostScript language) and an interpreter for Portable Document Format (PDF) files. Ghostscript translates PostScript code into many common, bitmapped formats, like those understood by your printer or screen. Ghostscript is normally used to display PostScript files and to print PostScript files to non-PostScript printers. If you need to display PostScript files or print them to non-PostScript printers, you should install ghostscript. If you install ghostscript, you also need to install the ghostscript-fonts package.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

giflib-4.1.3-7.1.el5.1 - giflib-4.1.3-7.1.el5_3.1

Group: System Environment/Libraries
Summary: Library for manipulating GIF format image files
Description: The giflib package contains a shared library of functions for loading and saving GIF format image files. It is API and ABI compatible with libungif, the library which supported uncompressed GIFs while the Unisys LZW patent was in effect. Install the giflib package if you need to write programs that use GIF files. You should also install the giflib-utils package if you need some simple utilities to manipulate GIFs.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

glib2-2.12.3-2.fc6 - glib2-2.12.3-4.el5_3.1

Group: System Environment/Libraries
Summary: A library of handy utility functions
Description: GLib is the low-level core library that forms the basis for projects such as GTK+ and GNOME. It provides data structure handling for C, portability wrappers, and interfaces for such runtime functionality as an event loop, threads, dynamic loading, and an object system. This package provides version 2 of GLib.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

glibc-2.5-34 - glibc-2.5-42

Group: System Environment/Libraries
Summary: The GNU libc libraries.
Description: The glibc package contains standard libraries which are used by multiple programs on the system. In order to save disk space and memory, as well as to make upgrading easier, common system code is kept in one place and shared between programs. This particular package contains the most important sets of shared libraries: the standard C library and the standard math library. Without these two libraries, a Linux system will not function.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gnome-python2-desktop-2.16.0-2.el5 - gnome-python2-desktop-2.16.0-3.el5

Group: Development/Languages
Summary: The sources for additional PyGNOME Python extension modules for the GNOME desktop
Description: The gnome-python-desktop package contains the source packages for additional Python bindings for GNOME. It should be used together with gnome-python.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gnome-session-2.16.0-6.el5 - gnome-session-2.16.0-7.el5

Group: User Interface/Desktops
Summary: GNOME session manager
Description: gnome-session manages a GNOME desktop session. It starts up the other core GNOME components and handles logout and saving the session.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

grep-2.5.1-54.2.el5 - grep-2.5.1-55.el5

Group: Applications/Text
Summary: The GNU versions of grep pattern matching utilities.
Description: The GNU versions of commonly used grep utilities. Grep searches through textual input for lines which contain a match to a specified pattern and then prints the matching lines. GNU's grep utilities include grep, egrep and fgrep. You should install grep on your system, because it is a very useful utility for searching through text.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

grub-0.97-13.2 - grub-0.97-13.5

Group: System Environment/Base
Summary: GRUB - the Grand Unified Boot Loader.
Description: GRUB (Grand Unified Boot Loader) is an experimental boot loader capable of booting into most free operating systems - Linux, FreeBSD, NetBSD, GNU Mach, and others as well as most commercial operating systems.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gstreamer-plugins-base-0.10.20-3.el5 - gstreamer-plugins-base-0.10.20-3.0.1.el5_3

Group: Applications/Multimedia
Summary: GStreamer streaming media framework base plug-ins
Description: GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. This package contains a set of well-maintained base plug-ins.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gstreamer-plugins-good-0.10.9-1.el5 - gstreamer-plugins-good-0.10.9-1.el5_3.2

Group: Applications/Multimedia
Summary: GStreamer plug-ins with good code and licensing
Description: GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. GStreamer Good Plug-ins is a collection of well-supported plug-ins of good quality and under the LGPL license.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

gtk-vnc-0.3.2-3.el5 - gtk-vnc-0.3.8-3.el5

Group: Development/Libraries
Summary: A GTK widget for VNC clients
Description: gtk-vnc is a VNC viewer widget for GTK. It is built using coroutines allowing it to be completely asynchronous while remaining single threaded.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

hal-0.5.8.1-38.el5 - hal-0.5.8.1-52.el5

Group: System Environment/Libraries
Summary: Hardware Abstraction Layer
Description: HAL is daemon for collection and maintaining information from several sources about the hardware on the system. It provides a live device list through D-BUS.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

htdig-3.2.0b6-9.0.1.el5_1 - htdig-3.2.0b6-11.el5

Group: Applications/Internet
Summary: ht://Dig - Web search engine
Description: The ht://Dig system is a complete world wide web indexing and searching system for a small domain or intranet. This system is not meant to replace the need for powerful internet-wide search systems like Lycos, Infoseek, Webcrawler and AltaVista. Instead it is meant to cover the search needs for a single company, campus, or even a particular sub section of a web site. As opposed to some WAIS-based or web-server based search engines, ht://Dig can span several web servers at a site. The type of these different web servers doesn't matter as long as they understand the HTTP 1.0 protocol. ht://Dig is also used by KDE to search KDE's HTML documentation. ht://Dig was developed at San Diego State University as a way to search the various web servers on the campus network.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

httpd-2.2.3-22.el5 - httpd-2.2.3-31.el5

Group: System Environment/Daemons
Summary: Apache HTTP Server
Description: The Apache HTTP Server is a powerful, efficient, and extensible web server.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

hwbrowser-0.30-2.el5 - hwbrowser-0.30-3.el5

Group: Applications/System
Summary: A hardware browser.
Description: A browser for your current hardware configuration.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

hwdata-0.213.11-1.el5 - hwdata-0.213.16-1.el5

Group: System Environment/Base
Summary: Hardware identification and configuration data
Description: hwdata contains various hardware identification and configuration data, such as the pci.ids database and MonitorsDb databases.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ibsim-0.4-3.el5 - ibsim-0.5-1.el5

Group: System Environment/Libraries
Summary: InfiniBand fabric simulator for management
Description: ibsim provides simulation of infiniband fabric for using with OFA OpenSM, diagnostic and management tools.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ibutils-1.2-9.el5 - ibutils-1.2-10.el5

Group: System Environment/Libraries
Summary: OpenIB Mellanox InfiniBand Diagnostic Tools
Description: ibutils provides IB network and path diagnostics.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

icu-3.6-5.11.1 - icu-3.6-5.11.4

Group: System Environment/Libraries
Summary: International Components for Unicode
Description: The International Components for Unicode (ICU) libraries provide robust and full-featured Unicode services on a wide variety of platforms. ICU supports the most current version of the Unicode standard, and they provide support for supplementary Unicode characters (needed for GB 18030 repertoire support). As computing environments become more heterogeneous, software portability becomes more important. ICU lets you produce the same results across all the various platforms you support, without sacrificing performance. It offers great flexibility to extend and customize the supplied services.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

infiniband-diags-1.4.1-2.el5 - infiniband-diags-1.4.4-1.el5

Group: System Environment/Libraries
Summary: OpenFabrics Alliance InfiniBand Diagnostic Tools
Description: This package provides IB diagnostic programs and scripts needed to diagnose an IB subnet.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

initscripts-8.45.25-1.el5 - initscripts-8.45.30-2.el5

Group: System Environment/Base
Summary: The inittab file and the /etc/init.d scripts.
Description: The initscripts package contains the basic system scripts used to boot your Red Hat system, change runlevels, and shut the system down cleanly. Initscripts also contains the scripts that activate and deactivate most network interfaces.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

iproute-2.6.18-9.el5 - iproute-2.6.18-10.el5

Group: Applications/System
Summary: Advanced IP routing and network device configuration tools.
Description: The iproute package contains networking utilities (ip and rtmon, for example) which are designed to use the advanced networking capabilities of the Linux 2.4.x and 2.6.x kernel.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

iprutils-2.2.8-2.el5 - iprutils-2.2.13-1.el5

Group: System Environment/Base
Summary: Utilities for the IBM Power Linux RAID adapters
Description: Provides a suite of utilities to manage and configure SCSI devices supported by the ipr SCSI storage device driver.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ipsec-tools-0.6.5-13.el5 - ipsec-tools-0.6.5-13.el5_3.1

Group: System Environment/Base
Summary: Tools for configuring and using IPSEC
Description: This is the IPsec-Tools package. You need this package in order to really use the IPsec functionality in the linux-2.5+ kernels. This package builds: - setkey, a program to directly manipulate policies and SAs - racoon, an IKEv1 keying daemon
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

iptables-1.3.5-4.el5 - iptables-1.3.5-5.3.el5

Group: System Environment/Base
Summary: Tools for managing Linux kernel packet filtering capabilities.
Description: The iptables utility controls the network packet filtering code in the Linux kernel. If you need to set up firewalls and/or IP masquerading, you should install this package.
Added Dependencies:
- kernel-headers >= 2.6.18-141.el5
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

iputils-20020927-45.el5 - iputils-20020927-46.el5

Group: System Environment/Daemons
Summary: Network monitoring tools including ping.
Description: The iputils package contains basic utilities for monitoring a network, including ping. The ping command sends a series of ICMP protocol ECHO_REQUEST packets to a specified network host to discover whether the target machine is alive and receiving network traffic.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ipvsadm-1.24-8.1 - ipvsadm-1.24-10

Group: Applications/System
Summary: Utility to administer the Linux Virtual Server
Description: ipvsadm is a utility to administer the IP Virtual Server services offered by the Linux kernel.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

irqbalance-0.55-10.el5 - irqbalance-0.55-15.el5

Group: System Environment/Base
Summary: IRQ balancing daemon.
Description: irqbalance is a daemon that evenly distributes IRQ load across multiple CPUs for enhanced performance.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

iscsi-initiator-utils-6.2.0.868-0.18.el5 - iscsi-initiator-utils-6.2.0.871-0.10.el5

Group: System Environment/Daemons
Summary: iSCSI daemon and utility programs
Description: The iscsi package provides the server daemon for the iSCSI protocol, as well as the utility programs used to manage it. iSCSI is a protocol for distributed disk access using SCSI commands sent over Internet Protocol networks.
Added Dependencies:
- doxygen
- python-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

isdn4k-utils-3.2-51.el5 - isdn4k-utils-3.2-56.el5

Group: Applications/System
Summary: Utilities for configuring an ISDN subsystem.
Description: The isdn4k-utils package contains a collection of utilities needed for configuring an ISDN subsystem.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

jadetex-3.12-13.1.1 - jadetex-3.12-15.el5

Group: Applications/Publishing
Summary: TeX macros used by Jade TeX output.
Description: JadeTeX contains the additional LaTeX macros necessary for taking Jade TeX output files and processing them as TeX files (to obtain DVI, PostScript, or PDF files, for example).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

java-1.6.0-openjdk-1.6.0.0-0.25.b09.el5 - java-1.6.0-openjdk-1.6.0.0-1.2.b09.el5

Group: Development/Languages
Summary: OpenJDK Runtime Environment
Description: The OpenJDK runtime environment.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

kdebase-3.5.4-19.el5 - kdebase-3.5.4-20.el5

Group: User Interface/Desktops
Summary: K Desktop Environment - core files
Description: Core applications for the K Desktop Environment. Included are: kdm (replacement for xdm), kwin (window manager), konqueror (filemanager, web browser, ftp client, ...), konsole (xterm replacement), kpanel (application starter and desktop pager), kaudio (audio server), kdehelp (viewer for kde help files, info and man pages), kthememgr (system for managing alternate theme packages) plus other KDE components (kcheckpass, kikbd, kscreensaver, kcontrol, kfind, kfontmanager, kmenuedit).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

kdelibs-3.5.4-18.el5 - kdelibs-3.5.4-22.el5_3

Group: System Environment/Libraries
Summary: K Desktop Environment - Libraries
Description: Libraries for the K Desktop Environment: KDE Libraries included: kdecore (KDE core library), kdeui (user interface), kfm (file manager), khtmlw (HTML widget), kio (Input/Output, networking), kspell (spelling checker), jscript (javascript), kab (addressbook), kimgio (image manipulation).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

kdenetwork-3.5.4-8.el5 - kdenetwork-3.5.4-9.el5

Group: Applications/Internet
Summary: K Desktop Environment - Network Applications
Description: Networking applications for the K Desktop Environment.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

kernel-2.6.18-128.el5 - kernel-2.6.18-164.el5

Group: System Environment/Kernel
Summary: The Linux kernel (the core of the Linux operating system)
Description: The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc.
Added Dependencies:
- hmaccalc
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

kexec-tools-1.102pre-56.el5 - kexec-tools-1.102pre-77.el5

Group: Applications/System
Summary: The kexec/kdump userspace component.
Description: kexec-tools provides /sbin/kexec binary that facilitates a new kernel to boot using the kernel's kexec feature either on a normal or a panic reboot. This package contains the /sbin/kexec binary and ancillary utilities that together form the userspace component of the kernel's kexec feature.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

krb5-1.6.1-31.el5 - krb5-1.6.1-36.el5

Group: System Environment/Libraries
Summary: The Kerberos network authentication system.
Description: Kerberos V5 is a trusted-third-party network authentication system, which can improve your network's security by eliminating the insecure practice of cleartext passwords.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ksh-20080202-2.el5 - ksh-20080202-14.el5

Group: Applications/Shells
Summary: The Original ATT Korn Shell
Description: KSH-93 is the most recent version of the KornShell by David Korn of AT&T Bell Laboratories. KornShell is a shell programming language, which is upward compatible with "sh" (the Bourne Shell).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

lcms-1.15-1.2.2 - lcms-1.18-0.1.beta1.el5_3.2

Group: Applications/Productivity
Summary: Color Management System
Description: LittleCMS intends to be a small-footprint, speed optimized color management engine in open source form.
Added Dependencies:
- autoconf
- automake
- libtool
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

less-394-5.el5 - less-394-6.el5

Group: Applications/Text
Summary: A text file browser similar to more, but better.
Description: The less utility is a text file browser that resembles more, but has more capabilities. Less allows you to move backwards in the file as well as forwards. Since less doesn't have to read the entire input file before it starts, less starts up more quickly than text editors (for example, vi). You should install less because it is a basic utility for viewing text files, and you'll use it frequently.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

lftp-3.5.1-2.fc6 - lftp-3.7.11-4.el5

Group: Applications/Internet
Summary: A sophisticated file transfer program
Description: LFTP is a sophisticated ftp/http file transfer program. Like bash, it has job control and uses the readline library for input. It has bookmarks, built-in mirroring, and can transfer several files in parallel. It is designed with reliability in mind.
Added Dependencies:
- gnutls-devel
Removed Dependencies:
- openssl-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libX11-1.0.3-9.el5 - libX11-1.0.3-11.el5

Group: System Environment/Libraries
Summary: X.Org X11 libX11 runtime library
Description: X.Org X11 libX11 runtime library
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libcxgb3-1.2.2-1.el5 - libcxgb3-1.2.3-1.el5

Group: System Environment/Libraries
Summary: Chelsio T3 iWARP HCA Userspace Driver
Description: Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs library. This driver enables Chelsio iWARP capable ethernet devices.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libdhcp-1.20-6.el5 - libdhcp-1.20-10.el5

Group: Development/Libraries
Summary: A library for network interface configuration with DHCP
Description: libdhcp enables programs to invoke and control the Dynamic Host Configuration Protocol (DHCP) clients: the Internet Software Consortium (ISC) IPv4 DHCP client library, libdhcp4client, and the IPv6 DHCPv6 client library, libdhcp6client, and provides Network Interface Configuration (NIC) services for network parameter autoconfiguration with DHCP.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libehca-1.2-2.el5 - libehca-1.2.1-3.el5

Group: System Environment/Libraries
Summary: IBM InfiniBand HCA Userspace Driver
Description: IBM hardware driver for use with libibverbs user space verbs access library.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libgcrypt-1.2.4-1.el5 - libgcrypt-1.4.4-5.el5

Group: System Environment/Libraries
Summary: A general-purpose cryptography library
Description: Libgcrypt is a general purpose crypto library based on the code used in GNU Privacy Guard. This is a development version.
Added Dependencies:
- fipscheck
- gawk
- libgpg-error-devel >= 1.4
Removed Dependencies:
- libgpg-error-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libibcm-1.0.3-1.el5 - libibcm-1.0.4-3.el5

Group: System Environment/Libraries
Summary: Userspace InfiniBand Communication Manager.
Description: libibcm provides a userspace InfiniBand Communication Managment library.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libibcommon-1.1.1-1.el5 - libibcommon-1.1.2-1.el5

Group: System Environment/Libraries
Summary: OpenFabrics Alliance InfiniBand management common library
Description: libibcommon provides common utility functions for the OFA diagnostic and management tools.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libibmad-1.2.1-1.el5 - libibmad-1.2.3-1.el5

Group: System Environment/Libraries
Summary: OpenFabrics Alliance InfiniBand MAD library
Description: libibmad provides low layer IB functions for use by the IB diagnostic and management programs. These include MAD, SA, SMP, and other basic IB functions.
Added Dependencies:
- libibumad-devel >= 1.2.3
Removed Dependencies:
- libibumad-devel >= 1.2.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libibumad-1.2.1-1.el5 - libibumad-1.2.3-1.el5

Group: System Environment/Libraries
Summary: OpenFabrics Alliance InfiniBand umad (user MAD) library
Description: libibumad provides the user MAD library functions which sit on top of the user MAD modules in the kernel. These are used by the IB diagnostic and management tools, including OpenSM.
Added Dependencies:
- libibcommon-devel >= 1.1.2
Removed Dependencies:
- libibcommon-devel >= 1.1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libibverbs-1.1.2-1.el5 - libibverbs-1.1.2-4.el5

Group: System Environment/Libraries
Summary: Library providing access to InfiniBand/iWARP hardware verbs protocol
Description: libibverbs is a library that allows userspace processes to use InfiniBand/iWARP "verbs" as described in the InfiniBand Architecture Specification. This includes direct hardware access for fast path operations. For this library to be useful, a device-specific plug-in module should also be installed.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libipathverbs-1.1-11.el5 - libipathverbs-1.1-14.el5

Group: System Environment/Libraries
Summary: QLogic InfiniPath HCA Userspace Driver
Description: QLogic hardware driver for use with libibverbs user space verbs access library. This driver supports QLogic InfiniPath based cards.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
- valgrind
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libmlx4-1.0-4.el5 - libmlx4-1.0.1-2.el5

Group: System Environment/Libraries
Summary: Mellanox ConnectX InfiniBand HCA Userspace Driver
Description: Mellanox hardware driver for use with libibverbs user space verbs access library. This driver supports Mellanox ConnectX architecture cards.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libmthca-1.0.5-1.el5 - libmthca-1.0.5-4.el5

Group: System Environment/Libraries
Summary: Mellanox InfiniBand HCA Userspace Driver
Description: Mellanox hardware driver for use with libibverbs user space verbs access library. This driver supports Mellanox based Single Data Rate and Dual Data Rate cards, including those from Cisco, Topspin, and Voltaire. It does not support the Connect-X architecture based Quad Data Rate cards (libmlx4 handles that hardware).
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libnes-0.5-4.el5 - libnes-0.6-2.el5

Group: System Environment/Libraries
Summary: NetEffect RNIC Userspace Driver
Description: Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs library. This driver enables NetEffect iWARP capable ethernet devices.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libpng-1.2.10-7.1.el5_0.1 - libpng-1.2.10-7.1.el5_3.2

Group: System Environment/Libraries
Summary: A library of functions for manipulating PNG image format files
Description: The libpng package contains a library of functions for creating and manipulating PNG (Portable Network Graphics) image format files. PNG is a bit-mapped graphics format similar to the GIF format. PNG was created to replace the GIF format, since GIF uses a patented data compression algorithm. Libpng should be installed if you need to manipulate PNG format image files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

librdmacm-1.0.8-1.el5 - librdmacm-1.0.8-5.el5

Group: System Environment/Libraries
Summary: Userspace RDMA Connection Manager.
Description: librdmacm provides a userspace RDMA Communication Managment API.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel >= 1.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libsdp-1.1.99-10.el5_2 - libsdp-1.1.99-11.el5

Group: System Environment/Libraries
Summary: A library for direct userspace use of Sockets Direct Protocol
Description: libsdp is an LD_PRELOAD-able library that can be used to have existing applications use InfiniBand Sockets Direct Protocol (SDP) instead of TCP sockets, transparently and without recompilation. For information on how to configure libsdp, see libsdp.conf, which is installed in $(sysconfdir) (usually /usr/local/etc or /etc).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libselinux-1.33.4-5.1.el5 - libselinux-1.33.4-5.5.el5

Group: System Environment/Libraries
Summary: SELinux library and simple utilities
Description: Security-enhanced Linux is a feature of the Linux® kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. libselinux provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API.
Added Dependencies:
- ruby
- ruby-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libsemanage-1.9.1-3.el5 - libsemanage-1.9.1-4.4.el5

Group: System Environment/Libraries
Summary: SELinux binary policy manipulation library
Description: Security-enhanced Linux is a feature of the Linux® kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. libsemanage provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings.
Added Dependencies:
- libsepol-devel >= 1.15.2-2
Removed Dependencies:
- libsepol-devel >= 1.14-1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libsepol-1.15.2-1.el5 - libsepol-1.15.2-2.el5

Group: System Environment/Libraries
Summary: SELinux binary policy manipulation library
Description: Security-enhanced Linux is a feature of the Linux® kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. libsepol provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libsoup-2.2.98-2.el5 - libsoup-2.2.98-2.el5_3.1

Group: Development/Libraries
Summary: Soup, an HTTP library implementation
Description: Libsoup is an HTTP library implementation in C. It was originally part of a SOAP (Simple Object Access Protocol) implementation called Soup, but the SOAP and non-SOAP parts have now been split into separate packages. libsoup uses the Glib main loop and is designed to work well with GTK applications. This enables GNOME applications to access HTTP servers on the network in a completely asynchronous fashion, very similar to the Gtk+ programming model (a synchronous operation mode is also supported for those who want it).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libspe2-2.2.80.121-4.el5 - libspe2-2.3.0.135-3.el5

Group: System Environment/Base
Summary: SPE Runtime Management Library
Description: SPE Runtime Management Library for the Cell Broadband Engine Architecture.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libtiff-3.8.2-7.el5_2.2 - libtiff-3.8.2-7.el5_3.4

Group: System Environment/Libraries
Summary: Library of functions for manipulating TIFF format image files
Description: The libtiff package contains a library of functions for manipulating TIFF (Tagged Image File Format) image format files. TIFF is a widely used file format for bitmapped images. TIFF files usually end in the .tif extension and they are often quite large. The libtiff package should be installed if you need to manipulate TIFF format image files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libunwind-0.98.5-3 - libunwind-0.98.5-5.el5

Group: Development/Debuggers
Summary: An unwinding library for ia64.
Description: Libunwind provides a C ABI to determine the call-chain of a program. This version of libunwind is targetted for the ia64 platform.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libvirt-0.3.3-14.el5 - libvirt-0.6.3-20.el5

Group: Development/Libraries
Summary: Library providing a simple API virtualization
Description: Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes).
Added Dependencies:
- /usr/sbin/qcow-create
- cyrus-sasl-devel
- e2fsprogs-devel
- gawk
- hal-devel
- iscsi-initiator-utils
- libselinux-devel
- lvm2
- nfs-utils
- numactl-devel
- parted-devel
- util-linux
- xhtml1-dtds
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libvirt-cim-0.5.1-4.el5 - libvirt-cim-0.5.5-2.el5

Group: Development/Libraries
Summary: A CIM provider for libvirt
Description: Libvirt-cim is a CMPI CIM provider that implements the DMTF SVPC virtualization model. The goal is to support most of the features exported by libvirt itself, enabling management of multiple platforms with a single provider.
Added Dependencies:
- libvirt-devel >= 0.6.3
Removed Dependencies:
- libvirt-devel >= 0.3.2
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libvorbis-1.1.2-3.el5_1.2 - libvorbis-1.1.2-3.el5_3.3

Group: System Environment/Libraries
Summary: The Vorbis General Audio Compression Codec.
Description: Ogg Vorbis is a fully open, non-proprietary, patent-and royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. The libvorbis package contains runtime libraries for use in programs that support Ogg Voribs.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libwmf-0.2.8.4-10.1 - libwmf-0.2.8.4-10.2

Group: System Environment/Libraries
Summary: Windows Metafile Library
Description: A library for reading and converting Windows MetaFile vector graphics (WMF)
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

libxml2-2.6.26-2.1.2.7 - libxml2-2.6.26-2.1.2.8

Group: Development/Libraries
Summary: Library providing XML and HTML support
Description: This library allows to manipulate XML files. It includes support to read, modify and write XML and HTML files. There is DTDs support this includes parsing and validation even with complex DtDs, either at parse time or later once the document has been modified. The output can be a simple SAX stream or and in-memory DOM like representations. In this case one can use the built-in XPath and XPointer implementation to select subnodes or ranges. A flexible Input/Output mechanism is available, with existing HTTP and FTP modules and combined to an URI library.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

linuxwacom-0.7.8.3-5.el5 - linuxwacom-0.7.8.3-6.el5

Group: User Interface/X Hardware Support
Summary: Wacom Drivers from Linux Wacom Project
Description: The Linux Wacom Project manages the drivers, libraries, and documentation for configuring and running Wacom tablets under the Linux operating system. It contains diagnostic applications as well as X.org XInput drivers.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

lksctp-tools-1.0.6-1.el5.1 - lksctp-tools-1.0.6-3.el5

Group: System Environment/Libraries
Summary: User-space access to Linux Kernel SCTP
Description: This is the lksctp-tools package for Linux Kernel SCTP (Stream Control Transmission Protocol) Reference Implementation. This package is intended to supplement the Linux Kernel SCTP Reference Implementation now available in the Linux kernel source tree in versions 2.5.36 and following. For more information on LKSCTP see the package documentation README file, section titled "LKSCTP - Linux Kernel SCTP." This package contains the base run-time library and command-line tools.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ltrace-0.5-7.45svn.el5 - ltrace-0.5-13.45svn.el5

Group: Development/Debuggers
Summary: Tracks runtime library calls from dynamically linked executables.
Description: Ltrace is a debugging program which runs a specified command until the command exits. While the command is executing, ltrace intercepts and records both the dynamic library calls called by the executed process and the signals received by the executed process. Ltrace can also intercept and print system calls executed by the process. You should install ltrace if you need a sysadmin tool for tracking the execution of processes.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

lvm2-2.02.40-6.el5 - lvm2-2.02.46-8.el5

Group: System Environment/Base
Summary: Userland logical volume management tools
Description: LVM2 includes all of the support for handling read/write operations on physical volumes (hard disks, RAID-Systems, magneto optical, etc., multiple devices (MD), see mdadd(8) or even loop devices, see losetup(8)), creating volume groups (kind of virtual disks) from one or more physical volumes and creating one or more logical volumes (kind of logical partitions) in volume groups.
Added Dependencies:
- device-mapper >= 1.02.32-1
Removed Dependencies:
- device-mapper >= 1.02.28-2
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

lvm2-cluster-2.02.40-7.el5 - lvm2-cluster-2.02.46-8.el5

Group: System Environment/Base
Summary: Cluster extensions for userland logical volume management tools
Description: Extensions to LVM2 to support clusters.
Added Dependencies:
- device-mapper >= 1.02.32-1
Removed Dependencies:
- device-mapper >= 1.02.28-2
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

m2crypto-0.16-6.el5.3 - m2crypto-0.16-6.el5.6

Group: System Environment/Libraries
Summary: Support for using OpenSSL in python scripts
Description: This package allows you to call OpenSSL functions from python scripts.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

man-pages-ja-20060815-9.el5 - man-pages-ja-20060815-11.el5

Group: Documentation
Summary: Japanese man (manual) pages from the Japanese Manual Project
Description: Japanese Manual pages, translated by JM-Project (Japanese Manual Project).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mcelog-0.7-1.22.fc6 - mcelog-0.9pre-1.27.el5

Group: System Environment/Base
Summary: Tool to translate x86-64 CPU Machine Check Exception data.
Description: mcelog is a daemon that collects and decodes Machine Check Exception data on x86-64 machines.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mdadm-2.6.4-1.el5 - mdadm-2.6.9-2.el5

Group: System Environment/Base
Summary: mdadm controls Linux md devices (software RAID arrays)
Description: mdadm is used to create, manage, and monitor Linux MD (software RAID) devices. As such, it provides similar functionality to the raidtools package. However, mdadm is a single program, and it can perform almost all functions without a configuration file, though a configuration file can be used to help with some common tasks.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

microcode_ctl-1.17-1.47.el5 - microcode_ctl-1.17-1.48.el5

Group: System Environment/Base
Summary: Tool to update x86/x86-64 CPU microcode.
Description: microcode_ctl - updates the microcode on Intel x86/x86-64 CPU's
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mkinitrd-5.1.19.6-44 - mkinitrd-5.1.19.6-54

Group: System Environment/Base
Summary: Creates an initial ramdisk image for preloading modules.
Description: Mkinitrd creates filesystem images for use as initial ramdisk (initrd) images. These ramdisk images are often used to preload the block device modules (SCSI or RAID) needed to access the root filesystem. In other words, generic kernels can be built without drivers for any SCSI adapters which load the SCSI driver as a module. Since the kernel needs to read those modules, but in this case it isn't able to address the SCSI adapter, an initial ramdisk is used. The initial ramdisk is loaded by the operating system loader (normally LILO) and is available to the kernel as soon as the ramdisk is loaded. The ramdisk image loads the proper SCSI adapter and allows the kernel to mount the root filesystem. The mkinitrd program creates such a ramdisk using information found in the /etc/modules.conf file.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mlocate-0.15-1.el5.1 - mlocate-0.15-1.el5.2

Group: Applications/System
Summary: An utility for finding files by name
Description: mlocate is a locate/updatedb implementation. It keeps a database of all existing files and allows you to lookup files by name. The 'm' stands for "merging": updatedb reuses the existing database to avoid rereading most of the file system, which makes updatedb faster and does not trash the system caches as much as traditional locate implementations.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mod_auth_mysql-3.0.0-3.1 - mod_auth_mysql-3.0.0-3.2.el5_3

Group: System Environment/Daemons
Summary: Basic authentication for the Apache web server using a MySQL database.
Description: mod_auth_mysql can be used to limit access to documents served by a web server by checking data in a MySQL database.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mod_authz_ldap-0.26-8.el5 - mod_authz_ldap-0.26-9.el5

Group: System Environment/Daemons
Summary: LDAP authorization module for the Apache HTTP Server
Description: The mod_authz_ldap package provides support for authenticating users of the Apache HTTP server against an LDAP database. mod_authz_ldap features the ability to authenticate users based on the SSL client certificate presented, and also supports password aging, and authentication based on role or by configured filters.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mod_nss-1.0.3-6.el5 - mod_nss-1.0.3-8.el5

Group: System Environment/Daemons
Summary: SSL/TLS module for the Apache HTTP server
Description: The mod_nss module provides strong cryptography for the Apache Web server via the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols using the Network Security Services (NSS) security library.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

module-init-tools-3.3-0.pre3.1.42.el5 - module-init-tools-3.3-0.pre3.1.54.el5

Group: System Environment/Kernel
Summary: Kernel module management utilities.
Description: The modutils package includes various programs needed for automatic loading and unloading of modules under 2.6 and later kernels, as well as other module management programs. Device drivers and filesystems are two examples of loaded and unloaded modules.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mpi-selector-1.0.1-1.el5 - mpi-selector-1.0.2-1.el5

Group: System Environment/Base
Summary: Provides site-wide and per-user MPI implementation selection
Description: A simple tool that allows system administrators to set a site-wide default for which MPI implementation is to be used, but also allow users to set their own default MPI implementation, thereby overriding the site-wide default. The default can be changed easily via the mpi-selector command -- editing of shell startup files is not required.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mpitests-3.0-2.el5 - mpitests-3.1-3.el5

Group: Applications
Summary: MPI Benchmarks and tests
Description: Set of popular MPI benchmarks: IMB-2.3 Presta-1.4.0 OSU benchmarks ver 2.2
Added Dependencies:
- mvapich >= 1.1.0-0.3355.2
- mvapich2 >= 1.2-0.p1.3
- openmpi >= 1.3.2-2
Removed Dependencies:
- libibcommon-devel
- libibumad-devel
- libibverbs-devel
- mvapich
- mvapich2
- openmpi
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mstflint-1.3-1.el5 - mstflint-1.4-1.el5

Group: Applications/System
Summary: Mellanox firmware burning tool
Description: This package contains a burning tool for Mellanox manufactured HCA cards. It also provides access to the relevant source code.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mvapich-1.1.0-0.2931.3.el5 - mvapich-1.1.0-0.3355.2.el5

Group: Development/Libraries
Summary: MPI implementation over Infiniband RDMA-enabled interconnect
Description: This is high performance and scalable MPI-1 implementation over Infiniband and RDMA-enabled interconnects. This implementation is based on MPICH and MVICH. MVAPICH is pronounced as `em-vah-pich''.
Added Dependencies:
- autoconf
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mvapich2-1.0.3-3.el5 - mvapich2-1.2-0.p1.3.el5

Group: Development/Libraries
Summary: OSU MVAPICH2 MPI package
Description: This is an MPI-2 implementation which includes all MPI-1 features. It is based on MPICH2 and MVICH.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4.el5
Removed Dependencies:
- libibverbs-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mysql-5.0.45-7.el5 - mysql-5.0.77-3.el5

Group: Applications/Databases
Summary: MySQL client programs and shared libraries
Description: MySQL is a multi-user, multi-threaded SQL database server. MySQL is a client/server implementation consisting of a server daemon (mysqld) and many different client programs and libraries. The base package contains the MySQL client programs, the client shared libraries, and generic MySQL files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

mysql-connector-odbc-3.51.12-2.2 - mysql-connector-odbc-3.51.26r1127-1.el5

Group: System Environment/Libraries
Summary: ODBC driver for MySQL
Description: An ODBC (rev 3) driver for MySQL, for use with unixODBC.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

net-snmp-5.3.2.2-5.el5 - net-snmp-5.3.2.2-7.el5

Group: System Environment/Daemons
Summary: A collection of SNMP protocol tools and libraries.
Description: SNMP (Simple Network Management Protocol) is a protocol used for network management. The NET-SNMP project includes various SNMP tools: an extensible agent, an SNMP library, tools for requesting or setting information from SNMP agents, tools for generating and handling SNMP traps, a version of the netstat command which uses SNMP, and a Tk/Perl mib browser. This package contains the snmpd and snmptrapd daemons, documentation, etc. You will probably also want to install the net-snmp-utils package, which contains NET-SNMP utilities. Building option: --without tcp_wrappers : disable tcp_wrappers support
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

netpbm-10.35-6.fc6 - netpbm-10.35.58-8.el5

Group: System Environment/Libraries
Summary: A library for handling different graphics file formats
Description: The netpbm package contains a library of functions which support programs for handling various graphics file formats, including .pbm (portable bitmaps), .pgm (portable graymaps), .pnm (portable anymaps), .ppm (portable pixmaps) and others.
Added Dependencies:
- python
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nfs-utils-1.0.9-40.el5 - nfs-utils-1.0.9-42.el5

Group: System Environment/Daemons
Summary: NFS utilities and supporting clients and daemons for the kernel NFS server.
Description: The nfs-utils package provides a daemon for the kernel NFS server and related tools, which provides a much higher level of performance than the traditional Linux NFS server used by most users. This package also contains the showmount program. Showmount queries the mount daemon on a remote host for information about the NFS (Network File System) server on the remote host. For example, showmount can display the clients which are mounted on that host. This package also contains the mount.nfs and umount.nfs program.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nfs-utils-lib-1.0.8-7.2.z2 - nfs-utils-lib-1.0.8-7.6.el5

Group: System Environment/Libraries
Summary: Network File System Support Library
Description: Support libraries that are needed by the commands and daemons the nfs-utils rpm.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nfs4-acl-tools-0.3.1-1.el5.1 - nfs4-acl-tools-0.3.3-1.el5

Group: System Environment/Tools
Summary: The nfs4 ACL tools
Description: This package contains commandline and GUI ACL utilities for the Linux NFSv4 client.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nspr-4.7.3-2.el5 - nspr-4.7.4-1.el5_3.1

Group: System Environment/Libraries
Summary: Netscape Portable Runtime
Description: NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free) and shared library linking.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nss-3.12.2.0-2.el5 - nss-3.12.3.99.3-1.el5_3.2

Group: System Environment/Libraries
Summary: Network Security Services
Description: Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled client and server applications. Applications built with NSS can support SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certificates, and other security standards.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

nss_ldap-253-17.el5 - nss_ldap-253-21.el5

Group: System Environment/Base
Summary: NSS library and PAM module for LDAP.
Description: This package includes two LDAP access clients: nss_ldap and pam_ldap. Nss_ldap is a set of C library extensions that allow X.500 and LDAP directory servers to be used as a primary source of aliases, ethers, groups, hosts, networks, protocol, users, RPCs, services, and shadow passwords (instead of or in addition to using flat files or NIS). Pam_ldap is a module for Linux-PAM that supports password changes, V2 clients, Netscape's SSL, ypldapd, Netscape Directory Server password policies, access authorization, and crypted hashes.
No added dependencies
Removed Dependencies:
- fipscheck-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ntp-4.2.2p1-9.el5 - ntp-4.2.2p1-9.el5_3.2

Group: System Environment/Daemons
Summary: Synchronizes system time using the Network Time Protocol (NTP).
Description: The Network Time Protocol (NTP) is used to synchronize a computer's time with another reference time source. The ntp package contains utilities and daemons that will synchronize your computer's time to Coordinated Universal Time (UTC) via the NTP protocol and NTP servers. The ntp package includes ntpdate (a program for retrieving the date and time from remote machines via a network) and ntpd (a daemon which continuously adjusts system time). Install the ntp package if you need tools for keeping your system's time synchronized via the NTP protocol.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

numactl-0.9.8-7.el5 - numactl-0.9.8-8.el5

Group: System Environment/Base
Summary: library for tuning for Non Uniform Memory Access machines
Description: Simple NUMA policy support. It consists of a numactl program to run other programs with a specific NUMA policy and a libnuma to do allocations with NUMA policy in applications.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ofed-docs-1.3.2-0.20080728.0355.1.el5 - ofed-docs-1.4.1-2.el5

Group: Documentation/Man
Summary: OpenFabrics Enterprise Distribution documentation
Description: Documentation from OFED 1.3
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openais-0.80.3-22.el5 - openais-0.80.6-8.el5

Group: System Environment/Base
Summary: The openais Standards-Based Cluster Framework executive and APIs
Description: This package contains the openais executive, openais service handlers, default configuration files and init script.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openhpi-2.10.2-1.el5 - openhpi-2.14.0-5.el5

Group: System Environment/Base
Summary: openhpi Hardware Platform Interface (HPI) library and tools
Description: OpenHPI is an open source project created with the intent of providing an implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. HPI includes resource modeling; access to and control over sensor, control, watchdog, and inventory data associated with resources; abstracted System Event Log interfaces; hardware events and alerts; and a managed hotswap interface. OpenHPI provides a modular mechanism for adding new hardware and device support easily. Many plugins exist in the OpenHPI source tree to provide access to various types of hardware. This includes, but is not limited to, IPMI based servers, Blade Center, and machines which export data via sysfs.
Added Dependencies:
- docbook-utils
- libxml2-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openib-1.3.2-0.20080728.0355.3.el5 - openib-1.4.1-3.el5

Group: System Environment/Base
Summary: OpenIB Infiniband Driver Stack
Description: User space initialization scripts for the kernel InfiniBand drivers
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openmpi-1.2.7-6.el5 - openmpi-1.3.2-2.el5

Group: Development/Libraries
Summary: Open Message Passing Interface
Description: Open MPI is an open source, freely available implementation of both the MPI-1 and MPI-2 standards, combining technologies and resources from several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in order to build the best MPI library available. A completely new MPI-2 compliant implementation, Open MPI offers advantages for system and software vendors, application developers, and computer science researchers. For more information, see http://www.open-mpi.org/ .
Added Dependencies:
- compat-dapl-devel >= 2.0.19-2
- libibverbs-devel >= 1.1.2-4
Removed Dependencies:
- compat-dapl-devel
- libibverbs-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

opensm-3.2.2-3.el5 - opensm-3.2.6-2.el5

Group: System Environment/Daemons
Summary: OpenIB InfiniBand Subnet Manager and management utilities
Description: OpenSM is the OpenIB project's Subnet Manager for Infiniband networks. The subnet manager is run as a system daemon on one of the machines in the infiniband fabric to manage the fabric's routing state. This package also contains various tools for diagnosing and testing Infiniband networks that can be used from any machine and do not need to be run on a machine running the opensm daemon.
Added Dependencies:
- libibmad-devel >= 1.2.3
Removed Dependencies:
- libibmad-devel >= 1.2.1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openssh-4.3p2-29.el5 - openssh-4.3p2-36.el5

Group: Applications/Internet
Summary: The OpenSSH implementation of SSH protocol versions 1 and 2
Description: SSH (Secure SHell) is a program for logging into and executing commands on a remote machine. SSH is intended to replace rlogin and rsh, and to provide secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. OpenSSH is OpenBSD's version of the last free version of SSH, bringing it up to date in terms of security and features, as well as removing all patented algorithms to separate libraries. This package includes the core files necessary for both the OpenSSH client and server. To make this package useful, you should also install openssh-clients, openssh-server, or both.
Added Dependencies:
- fipscheck-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openssl-0.9.8e-7.el5 - openssl-0.9.8e-12.el5

Group: System Environment/Libraries
Summary: The OpenSSL toolkit
Description: The OpenSSL toolkit provides support for secure communications between machines. OpenSSL includes a certificate management tool and shared libraries which provide various cryptographic algorithms and protocols.
No added dependencies
Removed Dependencies:
- fipscheck
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

openswan-2.6.14-1.el5_2.1 - openswan-2.6.21-5.el5

Group: System Environment/Daemons
Summary: Openswan IPSEC implementation
Description: Openswan is a free implementation of IPsec & IKE for Linux. IPsec is the Internet Protocol Security and uses strong cryptography to provide both authentication and encryption services. These services allow you to build secure tunnels through untrusted networks. Everything passing through the untrusted net is encrypted by the ipsec gateway machine and decrypted by the gateway at the other end of the tunnel. The resulting tunnel is a virtual private network or VPN. This package contains the daemons and userland tools for setting up Openswan. It optionally also builds the Openswan KLIPS IPsec stack that is an alternative for the NETKEY/XFRM IPsec stack that exists in the default Linux kernel. Openswan 2.6.x also supports IKEv2 (RFC4309)
Added Dependencies:
- bind-devel
- fipscheck-devel >= 1.2.0-1
- nss-devel >= 3.12.3-2
- xmlto
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

oprofile-0.9.3-18.el5 - oprofile-0.9.4-11.el5

Group: Development/System
Summary: System wide profiler
Description: OProfile is a profiling system for systems running Linux. The profiling runs transparently during the background, and profile data can be collected at any time. OProfile makes use of the hardware performance counters provided on Intel P6, and AMD Athlon family processors, and can use the RTC for profiling on other x86 processor types. See the HTML documentation for further details.
Added Dependencies:
- libtool
- popt
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

pam-0.99.6.2-4.el5 - pam-0.99.6.2-6.el5

Group: System Environment/Base
Summary: A security tool which provides authentication for applications
Description: PAM (Pluggable Authentication Modules) is a system security tool that allows system administrators to set authentication policy without having to recompile programs that handle authentication.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

pango-1.14.9-3.el5 - pango-1.14.9-6.el5

Group: System Environment/Libraries
Summary: System for layout and rendering of internationalized text
Description: Pango is a system for layout and rendering of internationalized text.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

pciutils-2.2.3-5 - pciutils-2.2.3-7.el5

Group: Applications/System
Summary: PCI bus related utilities.
Description: The pciutils package contains various utilities for inspecting and setting devices connected to the PCI bus. The utilities provided require kernel version 2.1.82 or newer (which support the /proc/bus/pci interface).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

perftest-1.2-11.el5 - perftest-1.2-14.el5

Group: Productivity/Networking/Diagnostic
Summary: IB Performance tests
Description: gen2 uverbs microbenchmarks
Added Dependencies:
- libibverbs-devel >= 1.1.2-4
- librdmacm-devel >= 1.0.8-5
Removed Dependencies:
- libibverbs-devel
- librdmacm-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

perl-5.8.8-18.el5 - perl-5.8.8-27.el5

Group: Development/Languages
Summary: The Perl programming language
Description: Perl is a high-level programming language with roots in C, sed, awk and shell scripting. Perl is good at handling processes and files, and is especially good at handling text. Perl's hallmarks are practicality and efficiency. While it is used to do a lot of different things, Perl's most common applications are system administration utilities and web programming. A large proportion of the CGI scripts on the web are written in Perl. You need the perl package installed on your system so that your system can handle Perl scripts. Install this package if you want to program in Perl or enable your system to handle Perl scripts.
No added dependencies
Removed Dependencies:
- gawk
- grep
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

perl-DBD-Pg-1.49-2.el5 - perl-DBD-Pg-1.49-2.el5_3.1

Group: Development/Libraries
Summary: A PostgresSQL interface for perl
Description: An implementation of DBI for PostgreSQL for Perl.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

php-5.1.6-23.el5 - php-5.1.6-23.2.el5_3

Group: Development/Languages
Summary: The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor)
Description: PHP is an HTML-embedded scripting language. PHP attempts to make it easy for developers to write dynamically generated webpages. PHP also offers built-in database integration for several commercial and non-commercial database management systems, so writing a database-enabled webpage with PHP is fairly simple. The most common use of PHP coding is probably as a replacement for CGI scripts. The php package contains the module which adds support for the PHP language to Apache HTTP Server.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

php-pear-1.4.9-4.el5.1 - php-pear-1.4.9-6.el5

Group: System
Summary: PHP Extension and Application Repository framework
Description: PEAR is a framework and distribution system for reusable PHP components. This package contains the basic PEAR components.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

piranha-0.8.4-11.el5 - piranha-0.8.4-13.el5

Group: System Environment/Base
Summary: Cluster administation tools
Description: Various tools to administer and configure the Linux Virtual Server as well as heartbeating and failover components. The LVS is a dynamically adjusted kernel routing mechanism that provides load balancing primarily for web and ftp servers though other services are supported.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

policycoreutils-1.33.12-14.2.el5 - policycoreutils-1.33.12-14.6.el5

Group: System Environment/Base
Summary: SELinux policy core utilities.
Description: Security-enhanced Linux is a feature of the Linux® kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. policycoreutils contains the policy core utilities that are required for basic operation of a SELinux system. These utilities include load_policy to load policies, setfiles to label filesystems, newrole to switch roles, and run_init to run /etc/init.d scripts in the proper context.
Added Dependencies:
- libsemanage-devel >= 1.9.1-4.2
Removed Dependencies:
- libsemanage-devel >= 1.6.17-1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

poppler-0.5.4-4.4.el5_1 - poppler-0.5.4-4.4.el5_3.9

Group: Development/Libraries
Summary: PDF rendering library
Description: Poppler, a PDF rendering library, it's a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ppc64-utils-0.11-10.el5 - ppc64-utils-0.11-12.el5

Group: System Environment/Base
Summary: Linux/PPC64 specific utilities
Description: A collection of utilities for Linux on PPC64 platforms.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

psmisc-22.2-6 - psmisc-22.2-7

Group: Applications/System
Summary: Utilities for managing processes on your system.
Description: The psmisc package contains utilities for managing processes on your system: pstree, killall and fuser. The pstree command displays a tree structure of all of the running processes on your system. The killall command sends a specified signal (SIGTERM if nothing is specified) to processes identified by name. The fuser command identifies the PIDs of processes that are using specified files or filesystems.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

pykickstart-0.43.3-1.el5 - pykickstart-0.43.5-1.el5

Group: System Environment/Libraries
Summary: A python library for manipulating kickstart files
Description: The pykickstart package is a python library for manipulating kickstart files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

pyorbit-2.14.1-1.1 - pyorbit-2.14.1-3.el5

Group: Development/Languages
Summary: Python bindings for ORBit2.
Description: pyorbit is an extension module for python that gives you access to the ORBit2 CORBA ORB.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

python-2.4.3-24.el5 - python-2.4.3-27.el5

Group: Development/Languages
Summary: An interpreted, interactive, object-oriented programming language.
Description: Python is an interpreted, interactive, object-oriented programming language often compared to Tcl, Perl, Scheme or Java. Python includes modules, classes, exceptions, very high level dynamic data types and dynamic typing. Python supports interfaces to many system calls and libraries, as well as to various windowing systems (X11, Motif, Tk, Mac and MFC). Programmers can write new built-in modules for Python in C or C++. Python can be used as an extension language for applications that need a programmable interface. This package contains most of the standard Python modules, as well as modules for interfacing to the Tix widget set for Tk and RPM. Note that documentation for Python is provided in the python-docs package.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

python-pyblock-0.26-3.el5 - python-pyblock-0.26-4.el5

Group: System Environment/Libraries
Summary: Python modules for dealing with block devices
Description: The pyblock contains Python modules for dealing with block devices.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

python-virtinst-0.300.2-12.el5 - python-virtinst-0.400.3-5.el5

Group: Development/Libraries
Summary: Python modules and utilities for installing virtual machines
Description: virtinst is a module that helps build and install libvirt based virtual machines. Currently supports KVM, QEmu and Xen virtual machines. Package includes several command line utilities, including virt-install (build and install new VMs) and virt-clone (clone an existing virtual machine).
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

qlvnictools-0.0.1-10.el5 - qlvnictools-0.0.1-11.el5

Group: System Environment/Base
Summary: VNIC ULP service
Description: VNIC ULP service
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

qperf-0.4.1-2.el5 - qperf-0.4.4-3.el5

Group: Networking/Diagnostic
Summary: Measure socket and RDMA performance
Description: Measure socket and RDMA performance.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4
- librdmacm-devel >= 1.0.8-5
Removed Dependencies:
- libibverbs-devel
- librdmacm-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rdesktop-1.4.1-6 - rdesktop-1.6.0-3

Group: User Interface/Desktops
Summary: X client for remote desktop into Windows Terminal Server
Description: rdesktop is an open source client for Windows NT Terminal Server and Windows 2000 & 2003 Terminal Services, capable of natively speaking Remote Desktop Protocol (RDP) in order to present the user's NT desktop. Unlike Citrix ICA, no server extensions are required.
Added Dependencies:
- pcsc-lite-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

readline-5.1-1.1 - readline-5.1-3.el5

Group: System Environment/Libraries
Summary: A library for editing typed command lines.
Description: The Readline library provides a set of functions that allow users to edit command lines. Both Emacs and vi editing modes are available. The Readline library includes additional functions for maintaining a list of previously-entered command lines for recalling or editing those lines, and for performing csh-like history expansion on previous commands.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

redhat-release-5Server-5.3.0.3 - redhat-release-5Server-5.4.0.3

Group: System Environment/Base
Summary: Red Hat Enterprise Linux release file
Description: Red Hat Enterprise Linux release files
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

redhat-release-notes-5Server-25 - redhat-release-notes-5Server-29

Group: System Environment/Base
Summary: Red Hat Enterprise Linux release notes files
Description: Red Hat Enterprise Linux release notes files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

redhat-rpm-config-8.0.45-29.el5 - redhat-rpm-config-8.0.45-32.el5

Group: Development/System
Summary: Red Hat specific rpm configuration files.
Description: Red Hat specific rpm configuration files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rgmanager-2.0.46-1.el5 - rgmanager-2.0.52-1.el5

Group: System Environment/Base
Summary: Open Source HA Resource Group Failover for Red Hat Enterprise Linux
Description: Red Hat Resource Group Manager provides high availability of critical server applications in the event of planned or unplanned system downtime.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rhn-client-tools-0.4.19-17.el5 - rhn-client-tools-0.4.20-9.el5

Group: System Environment/Base
Summary: Support programs and libraries for Red Hat Network
Description: Red Hat Network Client Tools provides programs and libraries to allow your system to receive software updates from Red Hat Network.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rhnlib-2.2.6-2.el5 - rhnlib-2.2.7-2.el5

Group: Development/Libraries
Summary: Python libraries for the RHN project
Description: rhnlib is a collection of python modules used by the Red Hat Network (http://rhn.redhat.com) software.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rhnsd-4.6.1-1.el5 - rhnsd-4.7.0-4.el5

Group: System Environment/Base
Summary: Red Hat Network query daemon
Description: The Red Hat Update Agent that automatically queries the Red Hat Network servers and determines which packages need to be updated on your machine, and runs any actions.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rpm-4.4.2.3-9.el5 - rpm-4.4.2.3-18.el5

Group: System Environment/Base
Summary: The RPM package management system
Description: The RPM Package Manager (RPM) is a powerful command line driven package management system capable of installing, uninstalling, verifying, querying, and updating software packages. Each software package consists of an archive of files along with information about the package like its version, a description, etc.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

rsh-0.17-38.el5 - rsh-0.17-40.el5

Group: Applications/Internet
Summary: Clients for remote access commands (rsh, rlogin, rcp).
Description: The rsh package contains a set of programs which allow users to run commands on remote machines, login to other machines and copy files between machines (rsh, rlogin and rcp). All three of these commands use rhosts style authentication. This package contains the clients needed for all of these services. The rsh package should be installed to enable remote access to other machines.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ruby-1.8.5-5.el5_2.6 - ruby-1.8.5-5.el5_3.7

Group: Development/Languages
Summary: An interpreter of object-oriented scripting language
Description: Ruby is the interpreted scripting language for quick and easy object-oriented programming. It has many features to process text files and to do system management tasks (as in Perl). It is simple, straight-forward, and extensible.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

s390utils-1.5.3-21.el5 - s390utils-1.8.1-8.el5

Group: System Environment/Base
Summary: Linux/390 specific utilities
Description: This package contains utilities related to Linux for S/390. The most important programs contained in this package are: - The cmstools suite to list, check, copy and cat files from a CMS volume. - chccwdev, a script to generically change attributes of a ccw device. - dasdfmt, which is used to low-level format eckd-dasds with either the classic linux disk layout or the new z/OS compatible disk layout. - dasdview, which displays DASD and VTOC information and dumps the content of a DASD to the console. - fdasd, which is used to create or modify partitions on eckd-dasds formatted with the z/OS compatible disk layout. - osasnmpd, a subagent for net-snmp to access the OSA hardware. - qetharp to query and purge address data in the OSA and HiperSockets hardware - qethconf to configure IBM QETH function IPA, VIPA and Proxy ARP. - src_vipa.sh to start applications using VIPA capabilities - tunedasd, a tool to adjust tunable parameters on DASD devices - vmconvert, a tool to convert vm dumps to lkcd compatible dumps. - vmcp, a tool to send CP commands from a Linux guest to the VM. - vmur, a tool to work with z/VM spool file queues (reader, punch, printer). - zipl, which is used to make either dasds or tapes bootable for system IPL or system dump. - zdump, which is used to retrieve system dumps from either tapes or dasds. - ziomon tools to collect data for zfcp performance analysis and report. - iucvterm, a z/VM IUCV terminal applications. - cpuplugd, a daemon that manages CPU and memory resources based on a set of rules. - dumpconf, the dump device used for system dump in case a kernel panic occurs. - mon_statd, pair of Linux - z/VM monitoring daemons. - ipl_tools, tool set to configure and list reipl and shutdown actions.
Added Dependencies:
- gettext
Removed Dependencies:
- indent
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

samba-3.0.33-3.7.el5 - samba-3.0.33-3.14.el5

Group: System Environment/Daemons
Summary: The Samba SMB server.
Description: Samba is the suite of programs by which a lot of PC-related machines share files, printers, and other information (such as lists of available files and printers). The Windows NT, OS/2, and Linux operating systems support this natively, and add-on packages can enable the same thing for DOS, Windows, VMS, UNIX of all kinds, MVS, and more. This package provides an SMB server that can be used to provide network services to SMB (sometimes called "Lan Manager") clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT need the NetBEUI (Microsoft Raw NetBIOS frame) protocol.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

sblim-1-31.el5_2.1 - sblim-1-35.el5

Group: Applications/System
Summary: Standards Based Linux Instrumentation for Manageability
Description: SBLIM stands for Standards Based Linux Instrumentation for Manageability, and consists of a set of standards based Web Based Enterprise Management (WBEM) modules that use the Common Information Model (CIM) standard to gather and provide systems management information, events, and methods to local or networked consumers via an CIM object services broker using the CMPI (Common Manageability Programming Interface) standard. This package provides a set of core providers and development tools for systems management applications.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

scim-bridge-0.4.5-8.el5 - scim-bridge-0.4.5-9.el5

Group: System Environment/Libraries
Summary: SCIM Bridge Gtk IM module
Description: SCIM Bridge is a C implementation of a Gtk IM module for SCIM.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

selinux-policy-2.4.6-203.el5 - selinux-policy-2.4.6-255.el5

Group: System Environment/Base
Summary: SELinux policy configuration
Description: SELinux Reference Policy - modular.
Added Dependencies:
- policycoreutils >= 1.33.12-14.5
Removed Dependencies:
- policycoreutils >= 1.33.12-1
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

setroubleshoot-2.0.5-3.el5 - setroubleshoot-2.0.5-5.el5

Group: Applications/System
Summary: Helps troubleshoot SELinux problems
Description: setroubleshoot gui. Application that allows you to view setroubleshoot-server messages. Provides tools to help diagnose SELinux problems. When AVC messages are generated an alert can be generated that will give information about the problem and help track its resolution. Alerts can be configured to user preference. The same tools can be run on existing log files.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

setup-2.5.58-4.el5 - setup-2.5.58-7.el5

Group: System Environment/Base
Summary: A set of system configuration and setup files.
Description: The setup package contains a set of important system configuration and setup files, such as passwd, group, and profile.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

sg3_utils-1.25-1.el5 - sg3_utils-1.25-4.el5

Group: Utilities/System
Summary: Utils for Linux's SCSI generic driver devices + raw devices
Description: Collection of Linux utilities for devices that use the SCSI command set. Includes utilities to copy data based on "dd" syntax and semantics (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); spin up and down disks (sg_start); do self tests (sg_senddiag); and various other functions. See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4 series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) must be used. In the 2.6 series other device names may be used as well (e.g. /dev/sda). Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.
No added dependencies
Removed Dependencies:
- libtool
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

sos-1.7-9.16.el5 - sos-1.7-9.27.el5

Group: Development/Libraries
Summary: A set of tools to gather troubleshooting information from a system
Description: Sos is a set of tools that gathers information about system hardware and configuration. The information can then be used for diagnostic purposes and debugging. Sos is commonly used to help support technicians and developers.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

sqlite-3.3.6-2 - sqlite-3.3.6-5

Group: Applications/Databases
Summary: Library that implements an embeddable SQL database engine
Description: SQLite is a C library that implements an SQL database engine. A large subset of SQL92 is supported. A complete database is stored in a single disk file. The API is designed for convenience and ease of use. Applications that link against SQLite can enjoy the power and flexibility of an SQL database without the administrative hassles of supporting a separate database server. Version 2 and version 3 binaries are named to permit each to be installed on a single host
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

squirrelmail-1.4.8-4.0.1.el5 - squirrelmail-1.4.8-5.el5_3.7

Group: Applications/Internet
Summary: SquirrelMail webmail client
Description: SquirrelMail is a standards-based webmail package written in PHP4. It includes built-in pure PHP support for the IMAP and SMTP protocols, and all pages render in pure HTML 4.0 (with no Javascript) for maximum compatibility across browsers. It has very few requirements and is very easy to configure and install. SquirrelMail has all the functionality you would want from an email client, including strong MIME support, address books, and folder manipulation.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

srptools-0.0.4-2.el5 - srptools-0.0.4-6.el5

Group: System Environment/Base
Summary: Tools for using the InfiniBand SRP protocol devices
Description: In conjunction with the kernel ib_srp driver, srptools allows you to discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand.
Added Dependencies:
- libibverbs-devel >= 1.1.2-4
Removed Dependencies:
- libibverbs-devel
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

strace-4.5.18-2.el5 - strace-4.5.18-5.el5

Group: Development/Debuggers
Summary: Tracks and displays system calls associated with a running process
Description: The strace program intercepts and records the system calls called and received by a running process. Strace can print a record of each system call, its arguments and its return value. Strace is useful for diagnosing problems and debugging, as well as for instructional purposes. Install strace if you need a tool to track the system calls made and received by a process.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

subversion-1.4.2-4.el5 - subversion-1.4.2-4.el5_3.1

Group: Development/Tools
Summary: Modern Version Control System designed to replace CVS
Description: Subversion is a concurrent version control system which enables one or more users to collaborate in developing and maintaining a hierarchy of files and directories while keeping a history of all changes. Subversion only stores the differences between versions, instead of every complete file. Subversion is intended to be a compelling replacement for CVS.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

sudo-1.6.9p17-3.el5 - sudo-1.6.9p17-5.el5

Group: Applications/System
Summary: Allows restricted root access for specified users.
Description: Sudo (superuser do) allows a system administrator to give certain users (or groups of users) the ability to run some (or all) commands as root while logging all commands and arguments. Sudo operates on a per-command basis. It is not a replacement for the shell. Features include: the ability to restrict what commands a user may run on a per-host basis, copious logging of each command (providing a clear audit trail of who did what), a configurable timeout of the sudo command, and the ability to use the same configuration file (sudoers) on many different machines.
Added Dependencies:
- sendmail
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

system-config-cluster-1.0.55-1.0 - system-config-cluster-1.0.57-1.5

Group: Applications/System
Summary: system-config-cluster is a utility which allows you to manage cluster configuration in a graphical setting.
Description: system-config-cluster is a utility which allows you to manage cluster configuuration in a graphical setting.
Added Dependencies:
- intltool
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

system-config-date-1.8.12-3.el5 - system-config-date-1.8.12-4.el5

Group: System Environment/Base
Summary: A graphical interface for modifying system date and time
Description: system-config-date is a graphical interface for changing the system date and time, configuring the system time zone, and setting up the NTP daemon to synchronize the time of the system with an NTP time server.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

system-config-language-1.1.18-2.el5 - system-config-language-1.1.18-3.el5

Group: System Environment/Base
Summary: A graphical interface for modifying the system language
Description: system-config-language is a graphical user interface that allows the user to change the default language of the system.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

system-config-network-1.3.99.12-1.el5 - system-config-network-1.3.99.18-1.el5

Group: Applications/System
Summary: The GUI of the NEtwork Adminstration Tool
Description: This is the GUI of the network configuration tool, supporting Ethernet, Wireless, TokenRing, ADSL, ISDN and PPP.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

system-config-samba-1.2.41-3.el5 - system-config-samba-1.2.41-5.el5

Group: System Environment/Base
Summary: Samba server configuration tool
Description: system-config-samba is a graphical user interface for creating, modifying, and deleting samba shares.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

systemtap-0.7.2-2.el5 - systemtap-0.9.7-5.el5

Group: Development/System
Summary: Instrumentation System
Description: SystemTap is an instrumentation system for systems running Linux 2.6. Developers can write instrumentation to collect data on the operation of the system.
Added Dependencies:
- /usr/share/xmlto/format/fo/pdf
- m4
- nss-devel
- xmlto
Removed Dependencies:
- elfutils-devel >= 0.127
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tcl-8.4.13-3.fc6 - tcl-8.4.13-4.el5

Group: Development/Languages
Summary: Tcl scripting language development environment
Description: The Tcl (Tool Command Language) provides a powerful platform for creating integration applications that tie together diverse applications, protocols, devices, and frameworks. When paired with the Tk toolkit, Tcl provides a fastest and powerful way to create cross-platform GUI applications. Tcl can also be used for a variety of web-related tasks and for creating powerful command languages for applications.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tcp_wrappers-7.6-40.6.el5 - tcp_wrappers-7.6-40.7.el5

Group: System Environment/Daemons
Summary: A security tool which acts as a wrapper for TCP daemons.
Description: The tcp_wrappers package provides small daemon programs which can monitor and filter incoming requests for systat, finger, FTP, telnet, rlogin, rsh, exec, tftp, talk and other network services. Install the tcp_wrappers program if you need a security tool for filtering incoming network services requests. This version also supports IPv6.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tetex-3.0-33.2.el5_1.2 - tetex-3.0-33.8.el5

Group: Applications/Publishing
Summary: The TeX text formatting system.
Description: TeTeX is an implementation of TeX for Linux or UNIX systems. TeX takes a text file and a set of formatting commands as input and creates a typesetter-independent .dvi (DeVice Independent) file as output. Usually, TeX is used in conjunction with a higher level formatting package like LaTeX or PlainTeX, since TeX by itself is not very user-friendly. The output format needn't to be DVI, but also PDF, when using pdflatex or similar tools. Install tetex if you want to use the TeX text formatting system. Consider to install tetex-latex (a higher level formatting package which provides an easier-to-use interface for TeX). Unless you are an expert at using TeX, you should also install the tetex-doc package, which includes the documentation for TeX.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tftp-0.42-3.1 - tftp-0.49-2

Group: Applications/Internet
Summary: The client for the Trivial File Transfer Protocol (TFTP).
Description: The Trivial File Transfer Protocol (TFTP) is normally used only for booting diskless workstations. The tftp package provides the user interface for TFTP, which allows users to transfer files to and from a remote machine. This program and TFTP provide very little security, and should not be enabled unless it is expressly needed.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tog-pegasus-2.7.1-2.el5 - tog-pegasus-2.7.2-1.el5

Group: Systems Management/Base
Summary: OpenPegasus WBEM Services for Linux
Description: OpenPegasus WBEM Services for Linux enables management solutions that deliver increased control of enterprise resources. WBEM is a platform and resource independent DMTF standard that defines a common information model and communication protocol for monitoring and controlling resources from diverse sources.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tomcat5-5.5.23-0jpp.7.el5_2.1 - tomcat5-5.5.23-0jpp.7.el5_3.2

Group: Networking/Daemons
Summary: Apache Servlet/JSP Engine, RI for Servlet 2.4/JSP 2.0 API
Description: Tomcat is the servlet container that is used in the official Reference Implementation for the Java Servlet and JavaServer Pages technologies. The Java Servlet and JavaServer Pages specifications are developed by Sun under the Java Community Process. Tomcat is developed in an open and participatory environment and released under the Apache Software License. Tomcat is intended to be a collaboration of the best-of-breed developers from around the world. We invite you to participate in this open development project. To learn more about getting involved, click here.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

totem-2.16.7-4.el5 - totem-2.16.7-6.el5

Group: Applications/Multimedia
Summary: Movie player for GNOME 2
Description: Totem is simple movie player for the Gnome desktop. It features a simple playlist, a full-screen mode, seek and volume controls, as well as a pretty complete keyboard navigation.
Added Dependencies:
- gstreamer-plugins-good >= 0.10.0
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

tzdata-2008i-1.el5 - tzdata-2009k-1.el5

Group: System Environment/Base
Summary: Timezone data
Description: This package contains data files with rules for various timezones around the world.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

udev-095-14.19.el5 - udev-095-14.21.el5

Group: System Environment/Base
Summary: A userspace implementation of devfs
Description: The udev package contains an implementation of devfs in userspace using sysfs and netlink.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

unix2dos-2.2-26.2.2 - unix2dos-2.2-26.2.3.el5

Group: Applications/Text
Summary: unix2dos - UNIX to DOS text file format converter
Description: A utility that converts plain text files in UNIX format to DOS format.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

util-linux-2.13-0.50.el5 - util-linux-2.13-0.52.el5

Group: System Environment/Base
Summary: A collection of basic system utilities.
Description: The util-linux package contains a large variety of low-level system utilities that are necessary for a Linux system to function. Among others, Util-linux contains the fdisk configuration tool and the login program.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

vim-7.0.109-4.el5_2.4z - vim-7.0.109-6.el5

Group: Applications/Editors
Summary: The VIM editor.
Description: VIM (VIsual editor iMproved) is an updated and improved version of the vi editor. Vi was the first real screen-based editor for UNIX, and is still very popular. VIM improves on vi by adding new features: multiple windows, multi-level undo, block highlighting and more.
Added Dependencies:
- ncurses-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

vino-2.13.5-6.el5 - vino-2.13.5-7.el5

Group: User Interface/Desktops
Summary: A remote desktop system for GNOME
Description: Vino is a VNC server for GNOME. It allows remote users to connect to a running GNOME session using VNC.
Added Dependencies:
- autoconf
- automake
- gnutls-devel
- intltool
- libtool
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

virt-manager-0.5.3-10.el5 - virt-manager-0.6.1-8.el5

Group: Applications/Emulators
Summary: Virtual Machine Manager
Description: Virtual Machine Manager provides a graphical tool for administering virtual machines for KVM, Xen, and QEmu. Start, stop, add or remove virtual devices, connect to a graphical or serial console, and see resource usage statistics for existing VMs on local or remote machines. Uses libvirt as the backend management API.
Added Dependencies:
- atk-devel
- cairo-devel
- glib2-devel
- intltool
- pango-devel
- pygobject2-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

virt-viewer-0.0.2-2.el5 - virt-viewer-0.0.2-3.el5

Group: Applications/System
Summary: Virtual Machine Viewer
Description: Virtual Machine Viewer provides a graphical console client for connecting to virtual machines. It uses the GTK-VNC widget to provide the display, and libvirt for looking up VNC server details.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

vnc-4.1.2-14.el5 - vnc-4.1.2-14.el5_3.1

Group: User Interface/Desktops
Summary: A remote display system.
Description: Virtual Network Computing (VNC) is a remote display system which allows you to view a computing 'desktop' environment not only on the machine where it is running, but from anywhere on the Internet and from a wide variety of machine architectures. This package contains a client which will allow you to connect to other desktops running a VNC server.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

vsftpd-2.0.5-12.el5 - vsftpd-2.0.5-16.el5

Group: System Environment/Daemons
Summary: vsftpd - Very Secure Ftp Daemon
Description: vsftpd is a Very Secure FTP daemon. It was written completely from scratch.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

watchdog-5.3.1-7.el5 - watchdog-5.6-1.el5

Group: System Environment/Daemons
Summary: Software and/or Hardware watchdog daemon
Description: The watchdog program can be used as a powerful software watchdog daemon or may be alternately used with a hardware watchdog device such as the IPMI hardware watchdog driver interface to a resident Baseboard Management Controller (BMC). watchdog periodically writes to /dev/watchdog; the interval between writes to /dev/watchdog is configurable through settings in the watchdog sysconfig file. This configuration file is also used to set the watchdog to be used as a hardware watchdog instead of its default software watchdog operation. In either case, if the device is open but not written to within the configured time period, the watchdog timer expiration will trigger a machine reboot. When operating as a software watchdog, the ability to reboot will depend on the state of the machine and interrupts. When operating as a hardware watchdog, the machine will experience a hard reset (or whatever action was configured to be taken upon watchdog timer expiration) initiated by the BMC.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

wdaemon-0.14-2 - wdaemon-0.14-4

Group: User Interface/X Hardware Support
Summary: Hotplug helper for Wacom X.org driver
Description: Helper application which emulates persistent input devices for Wacom tablets so they can be plugged and unplugged while X.org server is running. This should go away as soon X.org properly supports hotplugging.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

wget-1.10.2-7.el5 - wget-1.11.4-2.el5

Group: Applications/Internet
Summary: A utility for retrieving files using the HTTP or FTP protocols.
Description: GNU Wget is a file retrieval utility which can use either the HTTP or FTP protocols. Wget features include the ability to work in the background while you are logged out, recursive retrieval of directories, file name wildcard matching, remote file timestamp storage and comparison, use of Rest with FTP servers and Range with HTTP servers to retrieve files over slow or unstable connections, support for Proxy servers, and configurability.
Added Dependencies:
- zlib-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

wireshark-1.0.3-4.el5_2 - wireshark-1.0.8-1.el5_3.1

Group: Applications/Internet
Summary: Network traffic analyzer
Description: Wireshark is a network traffic analyzer for Unix-ish operating systems. This package lays base for libpcap, a packet capture and filtering library, contains command-line utilities, contains plugins and documentation for wireshark. A graphical user interface is packaged separately to GTK+ package.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xen-3.0.3-80.el5 - xen-3.0.3-94.el5

Group: Development/Libraries
Summary: Xen is a virtual machine monitor
Description: This package contains the Xen tools and management daemons needed to run virtual machines on x86, x86_64, and ia64 systems. Information on how to use Xen can be found at the Xen project pages. The Xen system also requires the Xen hypervisor and domain-0 kernel, which can be found in the kernel-xen* package. Virtualization can be used to run multiple operating systems on one physical system, for purposes of hardware consolidation, hardware abstraction, or to test untrusted applications in a sandboxed environment.
Added Dependencies:
- pciutils-devel
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xkeyboard-config-0.8-7.fc6 - xkeyboard-config-0.8-9.el5

Group: User Interface/X
Summary: xkeyboard-config alternative xkb data files
Description: xkeyboard-config alternative xkb data files
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-drv-ati-6.6.3-3.22.el5 - xorg-x11-drv-ati-6.6.3-3.27.el5

Group: User Interface/X Hardware Support
Summary: Xorg X11 ati video driver
Description: X.Org X11 ati video driver.
Added Dependencies:
- xorg-x11-server-sdk >= 1.1.1-48.58.el5
Removed Dependencies:
- xorg-x11-server-randr-source >= 1.1.1-48.52.el5
- xorg-x11-server-sdk >= 1.1.1-24
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-drv-i810-1.6.5-9.21.el5 - xorg-x11-drv-i810-1.6.5-9.25.el5

Group: User Interface/X Hardware Support
Summary: Xorg X11 i810 video driver(s)
Description: X.Org X11 i810 video driver.
Added Dependencies:
- xorg-x11-server-sdk >= 1.1.1-48.58.el5
Removed Dependencies:
- xorg-x11-server-randr-source >= 1.1.1-48.46.el5
- xorg-x11-server-sdk >= 1.1.0-2
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-drv-mga-1.4.2-10.el5 - xorg-x11-drv-mga-1.4.10-5.el5

Group: User Interface/X Hardware Support
Summary: Xorg X11 mga video driver
Description: X.Org X11 mga video driver.
Added Dependencies:
- xorg-x11-server-sdk >= 1.1.1-48.64.el5
Removed Dependencies:
- xorg-x11-server-sdk >= 1.1.0-2
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-drv-nv-2.1.12-3.el5 - xorg-x11-drv-nv-2.1.12-6.el5

Group: User Interface/X Hardware Support
Summary: Xorg X11 nv video driver
Description: X.Org X11 nv video driver.
Added Dependencies:
- xorg-x11-server-sdk >= 1.1.1-48.58.el5
Removed Dependencies:
- xorg-x11-server-randr-source >= 1.1.1-48.46.el5
- xorg-x11-server-sdk >= 1.1.1-48.22
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-proto-devel-7.1-9.fc6 - xorg-x11-proto-devel-7.1-13.el5

Group: Development/System
Summary: X.Org X11 Protocol headers
Description: X.Org X11 Protocol headers
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xorg-x11-server-1.1.1-48.52.el5 - xorg-x11-server-1.1.1-48.67.el5

Group: User Interface/X
Summary: X.Org X11 X server
Description: X.Org X11 X server
Added Dependencies:
- xorg-x11-proto-devel >= 7.1-13.el5
Removed Dependencies:
- xorg-x11-proto-devel >= 7.1-8
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

xulrunner-1.9.0.5-1.el5_2 - xulrunner-1.9.0.12-1.el5_3

Group: Applications/Internet
Summary: XUL Runtime for Gecko Applications
Description: XULRunner provides the XUL Runtime environment for Gecko applications.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

yaboot-1.3.13-7.el5 - yaboot-1.3.13-8.el5

Group: System Environment/Base
Summary: Linux bootloader for Power Macintosh "New World" computers.
Description: yaboot is a bootloader for PowerPC machines which works on New World ROM machines (Rev. A iMac and newer) and runs directly from Open Firmware, eliminating the need for Mac OS. yaboot can also bootload IBM pSeries machines.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

ypbind-1.19-11.el5 - ypbind-1.19-12.el5

Group: System Environment/Daemons
Summary: The NIS daemon which binds NIS clients to an NIS domain.
Description: The Network Information Service (NIS) is a system that provides network information (login names, passwords, home directories, group information) to all of the machines on a network. NIS can allow users to log in on any machine on the network, as long as the machine has the NIS client programs running and the user's password is recorded in the NIS passwd database. NIS was formerly known as Sun Yellow Pages (YP). This package provides the ypbind daemon. The ypbind daemon binds NIS clients to an NIS domain. Ypbind must be running on any machines running NIS client programs. Install the ypbind package on any machines running NIS client programs (included in the yp-tools package). If you need an NIS server, you also need to install the ypserv package to a machine on your network.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

yum-3.2.19-18.el5 - yum-3.2.22-20.el5

Group: System Environment/Base
Summary: RPM installer/updater
Description: Yum is a utility that can check for and automatically download and install updated RPM packages. Dependencies are obtained and downloaded automatically prompting the user as necessary.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

yum-metadata-parser-1.1.2-2.el5 - yum-metadata-parser-1.1.2-3.el5

Group: Development/Libraries
Summary: A fast metadata parser for yum
Description: Fast metadata parser for yum implemented in C.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

yum-rhn-plugin-0.5.3-30.el5 - yum-rhn-plugin-0.5.4-13.el5

Group: System Environment/Base
Summary: RHN support for yum
Description: This yum plugin provides support for yum to access a Red Hat Network server for software updates.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

zsh-4.2.6-1 - zsh-4.2.6-3.el5

Group: System Environment/Shells
Summary: A powerful interactive shell
Description: The zsh shell is a command interpreter usable as an interactive login shell and as a shell script command processor. Zsh resembles the ksh shell (the Korn shell), but includes many enhancements. Zsh supports command line editing, built-in spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and more.
No added dependencies
No removed dependencies
No added provides
No removed provides
No added conflicts
No removed conflicts
No added obsoletes
No removed obsoletes

このコンテンツは選択した言語では利用できません。

A.3. Updated Packages

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

多様性を受け入れるオープンソースの強化

会社概要

Red Hat legal and privacy links

Red Hat legal and privacy links