검색

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

7.38. device-mapper-multipath

download PDF
Updated device-mapper-multipath packages that fix numerous bugs and add various enhancements are now available for Red Hat Enterprise Linux 6.
The device-mapper-multipath packages provide tools for managing multipath devices using the device-mapper multipath kernel module.

Bug Fixes

BZ#578114
When the kpartx tool tried to delete a loop device that was previously created, and the udev utility had this loop device still open, the delete process would fail with the EBUSY error and kpartx did not attempt retry this operation. The kpartx tool has been modified to wait for one second and then retry deleting up to three times after the EBUSY error. As a result, loop devices created by kpartx are now always deleted as expected.
BZ#595692
The multipathd daemon only checked SCSI IDs when determining World Wide Identifiers (WWIDs) for devices. However, CCISS devices do not support SCSI IDs and could not be used by Device Mapper Multipath. With this update, multipathd checks CCISS devices for CCISS IDs properly and the devices are detected as expected.
BZ#810755
Some device configurations in the /usr/share/doc/device-mapper-multipath-0.X.X/multipath.conf.defaults file were out of date. Consequently, if users copied those configurations into the /etc/multipath.conf file, their devices would be misconfigured. The multipath.conf.defaults file has been updated and users can now copy configurations from it without misconfiguring their devices. Note that copying configurations from the multipath.conf.defaults file is not recommended as the configurations in that file are built into dm-multipath by default.
BZ#810788
Previously, Device Mapper Multipath stored multiple duplicate blacklist entries, which were consequently shown when listing the device-mapper-multipath's configuration. Device Mapper Multipath has been modified to check for duplicates before storing configuration entries and to store only the unique ones.
BZ#813963
Device Mapper Multipath had two Asymmetric Logical Unit Access (ALUA) prioritizers, which checked two different values. Certain ALUA setups were not correctly failing back to the primary path using either prioritizer because both values need to be checked and neither prioritizer checked them both. With this update, configuration options of both ALUA prioritizers now select the same prioritizer function, which checks both values as expected.
BZ#816717
When removing kpartx device partitions, the multipath -f option accepted only the device name, not the full pathname. Consequently, an attempt to delete a mulitpath device by the full pathname failed if the device had the kpartx partitions. Device Mapper Mulitpath has been modified to except the full pathname, when removing kpartx device partitions and deleting process no longer fails in the described scenario.
BZ#821885
Previously, the multipath -c option incorrectly listed SCSI devices, which were blacklisted by device type, as valid mulitpath path devices. As a consequence, Device Mapper Multipath could remove the partitions from SCSI devices that never ended up getting multipathed. With this update, multipath -c now checks if a SCSI device is blacklisted by device type, and reports it as invalid if it is.
BZ#822389
On reload, if a multipath device was not set to use the user_friendly_names parameter or a user-defined alias, Device Mapper Multipath would use its existing name instead of setting the WWID. Consequently, disabling user_friendly_names did not cause the multipath device names to change back to WWIDs on reload. This bug has been fixed and Device Mapper Mulitpath now sets the device name to its WWID if no user_friendly_names or user defined aliases are set. As a result, disabling user_friendly_names now allows device names to switch back to WWIDs on reload.
BZ#829065
When the Redundant Disk Array Controller (RDAC) checker returned the DID_SOFT_ERROR error, Device Mapper Multipath did not retry running the RDAC checker. This behavior caused Device Mapper Multipath to fail paths for transient issues that may have been resolved if it retried the checker. Device Mapper Multipath has been modified to retry the RDAC checker if it receives the DID_SOFT_ERROR error and no longer fails paths due to this error.
BZ#831045
When a multipath vector, which is a dynamically allocated array, was shrunk, Device Mapper Multipath was not reassigning the pointer to the array. Consequently, if the array location was changed by the shrinking, Device Mapper Multipath would corrupt its memory with unpredictable results. The underlying source code has been modified and Device Mapper Multipath now correctly reassigns the pointer after the array has been shrunk.
BZ#836890
Device Mapper Multipath was occasionally assigning a WWID with a white space for AIX VDASD devices. As a consequence, there was no single blacklist of WWID entry that could blacklist the device on all machines. With this update, Device Mapper Multipath assigns WWIDs without any white space characters for AIX VDASD devices, so that all machines assign the same WWID to an AIX VDASD device and the user is always able to blacklist the device on all machines.
BZ#841732
If two multipath devices had their aliases swapped, Device Mapper Multipath switched their tables. Consequently, if the user switched aliases on two devices, any application using the device would be pointed to the incorrect Logical Unit Number (LUN). Device Mapper Multipath has been modified to check if the device's new alias matches a different multipath device, and if so, to not switch to it.
BZ#860748
Previously, Device Mapper Multipath did not check the device type and WWID blacklists as soon as this information was available for a path device. Device Mapper Multipath has been modified to check the device type and WWID blacklists as soon as this information is available. As a result, Device Mapper Multipath no longer waits before blacklisting invalid paths.
BZ#869253
Previously, the multipathd daemon and the kpartx tool did not instruct the libdevmapper utility to skip the device creation process and let udev create it. As a consequence, sometimes libdevmapper created a block device in the /dev/mapper/ directory, and sometimes udev created a symbolic link in the same directory. With this update, multipathd and kpartx prevent libdevmapper from creating a block device and udev always creates a symbolic link in the /dev/mapper/ directory as expected.

Enhancements

BZ#619173
This enhancement adds a built-in configuration for SUN StorageTek 6180 to Device Mapper Multipath.
BZ#735459
To set up persistent reservations on multipath devices, it was necessary to set it up on all of the path devices. If a path device was added later, the user had to manually add reservations to that path. This enhancement adds the ability to set up and manage SCSI persistent reservations using device-mapper devices with the mpathpersist utility. As a result, when path devices are added, persistent reservations are set up as well.
BZ#810989
This enhancement updates the multipathd init script to load the dm-multipathd module, so that users do not have to do this manually in cases when no /etc/multipath.conf file is present during boot. Note that it is recommended to create the multipath.conf file by running the mpathconf --enable command, which also loads the dm-multipath module.
BZ#818367
When the RDAC path device is in service mode, it is unable to handle I/O requests. With this enhancement, Device Mapper Multipath puts an RDAC path device into a failed state if it is in the service mode.
BZ#839386
This update adds two new options to the defaults and devices sections of the multipath.conf file; the retain_attached_hw_hander option and the detect_prio option. By default, both of these options are set to no in the defaults section of the multipath.conf file. However, they are set to yes in the NETAPP/LUN device configuration file. If retain_attach_hw_handler is set to yes and the SCSI layer has attached a hardware handler to the device, Device Mapper Multipath sets the hardware as usual. If detect_prio is set to yes, Device Mapper Multipath will check if the device supports ALUA. If so, it automatically sets the prioritizer to the alua value. If the device does not support ALUA, Device Mapper Multipath sets the prioritizer as usual. This behavior allows NETAPP devices to work in ALUA or non-ALUA mode without making users change to built-in config.
In order for retain_attached_hw_handler to work, the SCSI layer must have already attached the device handler. To do this, the appropriate scsi_dh_XXX module, for instance scsi_dh_alua, must be loaded before the SCSI layer discovers the devices. To guarantee this, add the following parameter to the kernel command line:
rdloaddriver=scsi_dh_XXX
Updated device-mapper-multipath packages that fix one bug are now available for Red Hat Enterprise Linux 6.
The device-mapper-multipath packages provide tools for managing multipath devices using the device-mapper multipath kernel module.

Bug Fix

BZ#988704
Prior to this update, Device Mapper Multipath did not check for NULL pointers before dereferencing them in the sysfs functions. As a result, the multipathd daemon could crash if a multipath device was resized while a path device was being removed. With this update, Device Mapper Multipath checks for NULL pointers in sysfs functions and no longer crashes when a multipath device is resized at the same time as a path device is removed.
Users of device-mapper-multipath are advised to upgrade to these updated packages, which fix this bug.
Updated device-mapper-multipath packages that add one enhancement are now available for Red Hat Enterprise Linux 6.
The device-mapper-multipath packages provide tools for managing multipath devices using the device-mapper multipath kernel module.

Enhancement

BZ#993545
This update adds a new /etc/multipath.conf file default keyword, "reload_readwrite". If set to "yes", multipathd will listen to path device change events, and if the device has read-write access, it will reload the multipath device. This allows multipath devices to automatically have read-write permissions, as soon as the path devices have read-write access, instead of requiring manual intervention. Thus, when all the path devices belonging to a multipath device have read-write access, the multipath device will automatically allow read-write permissions.
Users of device-mapper-multipath are advised to upgrade to these updated packages, which add this enhancement.
Red Hat logoGithubRedditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

© 2024 Red Hat, Inc.