Search

Chapter 2. Configuring the internal OAuth server

download PDF
Important

Configuring these options must change because they’re set in the master config file now.

2.1. OpenShift Container Platform OAuth server

The OpenShift Container Platform master includes a built-in OAuth server. Users obtain OAuth access tokens to authenticate themselves to the API.

When a person requests a new OAuth token, the OAuth server uses the configured identity provider to determine the identity of the person making the request.

It then determines what user that identity maps to, creates an access token for that user, and returns the token for use.

2.2. OAuth token request flows and responses

The OAuth server supports standard authorization code grant and the implicit grant OAuth authorization flows.

When requesting an OAuth token using the implicit grant flow (response_type=token) with a client_id configured to request WWW-Authenticate challenges (like openshift-challenging-client), these are the possible server responses from /oauth/authorize, and how they should be handled:

StatusContentClient response

302

Location header containing an access_token parameter in the URL fragment (RFC 4.2.2)

Use the access_token value as the OAuth token

302

Location header containing an error query parameter (RFC 4.1.2.1)

Fail, optionally surfacing the error (and optional error_description) query values to the user

302

Other Location header

Follow the redirect, and process the result using these rules

401

WWW-Authenticate header present

Respond to challenge if type is recognized (e.g. Basic, Negotiate, etc), resubmit request, and process the result using these rules

401

WWW-Authenticate header missing

No challenge authentication is possible. Fail and show response body (which might contain links or details on alternate methods to obtain an OAuth token)

Other

Other

Fail, optionally surfacing response body to the user

2.3. Options for the internal OAuth server

Several configuration options are available for the internal OAuth server.

2.3.1. OAuth token duration options

The internal OAuth server generates two kinds of tokens:

Access tokens

Longer-lived tokens that grant access to the API.

Authorize codes

Short-lived tokens whose only use is to be exchanged for an access token.

You can configure the default duration for both types of token. If necessary, you can override the duration of the access token by using an OAuthClient object definition.

2.3.2. OAuth grant options

When the OAuth server receives token requests for a client to which the user has not previously granted permission, the action that the OAuth server takes is dependent on the OAuth client’s grant strategy.

The OAuth client requesting token must provide its own grant strategy.

You can apply the following default methods:

auto

Auto-approve the grant and retry the request.

prompt

Prompt the user to approve or deny the grant.

2.4. Configuring the internal OAuth server’s token duration

You can configure default options for the internal OAuth server’s token duration.

Important

By default, tokens are only valid for 24 hours. Existing sessions expire after this time elapses.

If the default time is insufficient, then this can be modified using the following procedure.

Procedure

  1. Create a configuration file that contains the token duration options. The following file sets this to 48 hours, twice the default.

    apiVersion: config.openshift.io/v1
    kind: OAuth
    metadata:
      name: cluster
    spec:
      tokenConfig:
        accessTokenMaxAgeSeconds: 172800 1
    1
    Set accessTokenMaxAgeSeconds to control the lifetime of access tokens. The default lifetime is 24 hours, or 86400 seconds. This attribute cannot be negative.
  2. Apply the new configuration file:

    Note

    Because you update the existing OAuth server, you must use the oc apply command to apply the change.

    $ oc apply -f </path/to/file.yaml>
  3. Confirm that the changes are in effect:

    $ oc describe oauth.config.openshift.io/cluster
    ...
    Spec:
      Token Config:
        Access Token Max Age Seconds:  172800
    ...

2.5. Register an additional OAuth client

If you need an additional OAuth client to manage authentication for your OpenShift Container Platform cluster, you can register one.

Procedure

  • To register additional OAuth clients:

    $ oc create -f <(echo '
    kind: OAuthClient
    apiVersion: oauth.openshift.io/v1
    metadata:
     name: demo 1
    secret: "..." 2
    redirectURIs:
     - "http://www.example.com/" 3
    grantMethod: prompt 4
    ')
    1
    The name of the OAuth client is used as the client_id parameter when making requests to <namespace_route>/oauth/authorize and <namespace_route>/oauth/token.
    2
    The secret is used as the client_secret parameter when making requests to <namespace_route>/oauth/token.
    3
    The redirect_uri parameter specified in requests to <namespace_route>/oauth/authorize and <namespace_route>/oauth/token must be equal to or prefixed by one of the URIs listed in the redirectURIs parameter value.
    4
    The grantMethod is used to determine what action to take when this client requests tokens and has not yet been granted access by the user. Specify auto to automatically approve the grant and retry the request, or prompt to prompt the user to approve or deny the grant.

2.6. OAuth server metadata

Applications running in OpenShift Container Platform might have to discover information about the built-in OAuth server. For example, they might have to discover what the address of the <namespace_route> is without manual configuration. To aid in this, OpenShift Container Platform implements the IETF OAuth 2.0 Authorization Server Metadata draft specification.

Thus, any application running inside the cluster can issue a GET request to https://openshift.default.svc/.well-known/oauth-authorization-server to fetch the following information:

{
  "issuer": "https://<namespace_route>", 1
  "authorization_endpoint": "https://<namespace_route>/oauth/authorize", 2
  "token_endpoint": "https://<namespace_route>/oauth/token", 3
  "scopes_supported": [ 4
    "user:full",
    "user:info",
    "user:check-access",
    "user:list-scoped-projects",
    "user:list-projects"
  ],
  "response_types_supported": [ 5
    "code",
    "token"
  ],
  "grant_types_supported": [ 6
    "authorization_code",
    "implicit"
  ],
  "code_challenge_methods_supported": [ 7
    "plain",
    "S256"
  ]
}
1
The authorization server’s issuer identifier, which is a URL that uses the https scheme and has no query or fragment components. This is the location where .well-known RFC 5785 resources containing information about the authorization server are published.
2
URL of the authorization server’s authorization endpoint. See RFC 6749.
3
URL of the authorization server’s token endpoint. See RFC 6749.
4
JSON array containing a list of the OAuth 2.0 RFC 6749 scope values that this authorization server supports. Note that not all supported scope values are advertised.
5
JSON array containing a list of the OAuth 2.0 response_type values that this authorization server supports. The array values used are the same as those used with the response_types parameter defined by "OAuth 2.0 Dynamic Client Registration Protocol" in RFC 7591.
6
JSON array containing a list of the OAuth 2.0 grant type values that this authorization server supports. The array values used are the same as those used with the grant_types parameter defined by OAuth 2.0 Dynamic Client Registration Protocol in RFC 7591.
7
JSON array containing a list of PKCE RFC 7636 code challenge methods supported by this authorization server. Code challenge method values are used in the code_challenge_method parameter defined in Section 4.3 of RFC 7636. The valid code challenge method values are those registered in the IANA PKCE Code Challenge Methods registry. See IANA OAuth Parameters.

2.7. Troubleshooting OAuth API events

In some cases the API server returns an unexpected condition error message that is difficult to debug without direct access to the API master log. The underlying reason for the error is purposely obscured in order to avoid providing an unauthenticated user with information about the server’s state.

A subset of these errors is related to service account OAuth configuration issues. These issues are captured in events that can be viewed by non-administrator users. When encountering an unexpected condition server error during OAuth, run oc get events to view these events under ServiceAccount.

The following example warns of a service account that is missing a proper OAuth redirect URI:

$ oc get events | grep ServiceAccount
1m         1m          1         proxy                    ServiceAccount                                  Warning   NoSAOAuthRedirectURIs   service-account-oauth-client-getter   system:serviceaccount:myproject:proxy has no redirectURIs; set serviceaccounts.openshift.io/oauth-redirecturi.<some-value>=<redirect> or create a dynamic URI using serviceaccounts.openshift.io/oauth-redirectreference.<some-value>=<reference>

Running oc describe sa/<service-account-name> reports any OAuth events associated with the given service account name.

$ oc describe sa/proxy | grep -A5 Events
Events:
  FirstSeen     LastSeen        Count   From                                    SubObjectPath   Type            Reason                  Message
  ---------     --------        -----   ----                                    -------------   --------        ------                  -------
  3m            3m              1       service-account-oauth-client-getter                     Warning         NoSAOAuthRedirectURIs   system:serviceaccount:myproject:proxy has no redirectURIs; set serviceaccounts.openshift.io/oauth-redirecturi.<some-value>=<redirect> or create a dynamic URI using serviceaccounts.openshift.io/oauth-redirectreference.<some-value>=<reference>

The following is a list of the possible event errors:

No redirect URI annotations or an invalid URI is specified

Reason                  Message
NoSAOAuthRedirectURIs   system:serviceaccount:myproject:proxy has no redirectURIs; set serviceaccounts.openshift.io/oauth-redirecturi.<some-value>=<redirect> or create a dynamic URI using serviceaccounts.openshift.io/oauth-redirectreference.<some-value>=<reference>

Invalid route specified

Reason                  Message
NoSAOAuthRedirectURIs   [routes.route.openshift.io "<name>" not found, system:serviceaccount:myproject:proxy has no redirectURIs; set serviceaccounts.openshift.io/oauth-redirecturi.<some-value>=<redirect> or create a dynamic URI using serviceaccounts.openshift.io/oauth-redirectreference.<some-value>=<reference>]

Invalid reference type specified

Reason                  Message
NoSAOAuthRedirectURIs   [no kind "<name>" is registered for version "v1", system:serviceaccount:myproject:proxy has no redirectURIs; set serviceaccounts.openshift.io/oauth-redirecturi.<some-value>=<redirect> or create a dynamic URI using serviceaccounts.openshift.io/oauth-redirectreference.<some-value>=<reference>]

Missing SA tokens

Reason                  Message
NoSAOAuthTokens         system:serviceaccount:myproject:proxy has no tokens
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.