intel_sst

The intel_sst test exercises the Intel® Speed Select Technology (SST) feature for CPU frequency scaling. You can run this test to verify that your system can customize per-core performance to match workloads. This test also verifies that the system can boost targeted applications at runtime.

What the test covers
The intel_sst test is a CPU frequency scaling test that exercises Intel’s Speed Select Technology (SST) feature. Use this feature to customize the per-core performance to match CPU to workload, and to allocate per performance. You can use this to boost the performance of targeted applications at runtime.
RHEL version supported
  • RHEL 8
  • RHEL 9
  • RHEL 10
What the test does

The intel_sst test runs on SST-enabled systems only and supports the following features:

  • Speed Select Base Freq (SST-BF) - Allows specific cores to run higher base frequency (P1) by reducing the base frequencies (P1) of other cores.
  • Frequency Prioritization (SST-CP) - Allows specific cores to clock higher by reducing the frequency of cores running lower-priority software. The test checks if these features are supported and configured on the system. Based on the result, it runs only one subtest of the respective feature.
Preparing for the test

You must run this test on Intel chipset architectures only.

  • To use the Intel® SST-BF functionality on a Red Hat Enterprise Linux (RHEL) based platform. Prerequisites:
    1. Enable the Intel® SST-BF feature in the BIOS
    2. Configure the kernel parameters - intel_idle.max_cstate=1
  • To use the Intel® SST-CP functionality on a Red Hat Enterprise Linux (RHEL) based platform. Prerequisites:
    1. Enable the Intel® SST-CP feature in the BIOS
    2. Configure the kernel parameters - intel_idle.max_cstate=1 intel_pstate=disable
Running the test

This test is non-interactive. Run the following command and then select the appropriate intel_sst test name from the list that displays.

 rhcert-run
Run time
This test takes around 5 minutes to complete. Any other mandatory or selected tests add to the overall run time.