USB3
The USB3 test verifies basic USB3 port functionality. You can run this test to verify enumeration, access, and hot-plugging on the operating system.
- What the test covers
-
The USB3 test covers USB3 ports from a basic functionality standpoint. It ensures that all ports can be enumerated, accessed, and hot plugged by the OS. The USB3 test supports three speed-based tests: 5Gbps, 10Gbps, and 20Gbps.
All three tests are planned if the system supports USB3. Successful credit for each test adds the corresponding feature to the Red Hat Ecosystem Catalog listing. The tests and their success criteria are as follows:
- Success criteria
-
- USB3_5Gbps - The test passes when the device transfer speed is 5Gbps.
- USB3_10Gbps - The test passes when the device transfer speed is 10Gbps.
- USB3_20Gbps - The test passes when the device transfer speed is 20Gbps.
- RHEL version supported
-
- RHEL 8
- RHEL 9
- RHEL 10
- What the test does
-
This test ensures that all USB3 ports function as expected. It asks for the number of available USB3 ports, minus any in use for a keyboard or mouse. It then asks the tester to plug and unplug a USB3 device into each port.
The test watches for attach and detach events and records them. The test passes if it detects both plug and unplug events for each unique port entered.
- Preparing for the test
- Count the available USB3 ports and have an available USB3 device to use during the testing. You may need to trace the USB ports from the motherboard header(s) to distinguish between USB2 and USB3 ports. Ensure that the line speed of the device matches the expected speed of the test, that is, 5Gbps, 10 Gbps, or 20Gbps.
- Running the test
-
The USB3 test is interactive. Run the following command, then select the
USB3test name from the list that displays.rhcert-runWhen prompted, enter the number of available USB3 ports on the system. Don’t count ports currently used by a keyboard or mouse. The system asks you to plug the test USB3 device into a port.
The system pauses until you press y to continue, then asks you to unplug the device. Press y again to continue. Repeat these steps for each port you entered.
You can test ports in any order, but test each port only once.
- Run time
- The USB3 test takes about 15 seconds per USB3 port. This includes the time to manually plug in the device, scan the port, unplug the device, and scan the port again. The required supportable test adds about a minute to the overall run time.