Thunderbolt3

The Thunderbolt3 test verifies port hot-plug and basic functionality. You can run this test to verify proper device addition and removal by the operating system.

What the test covers
The Thunderbolt3 test covers Thunderbolt 3 ports from a hot plug and basic functionality standpoint. It ensures that all ports can be accessed by the OS. It also confirms that devices attached to the ports are properly added and removed.
RHEL version supported
  • RHEL 8
  • RHEL 9
  • RHEL 10
What the test does

This test ensures that all Thunderbolt 3 ports function as expected. It asks for the number of available Thunderbolt3 ports. It then asks the tester to plug and unplug a Thunderbolt 3 device into each port.

The test watches for Thunderbolt 3 device attach and detach events and records them. The test passes if it detects both plug and unplug events for each port entered. USB-C devices share the same connector as Thunderbolt 3 devices, but they are not Thunderbolt 3 devices.

The test does not pass if testers use USB C devices, even ones that claim Thunderbolt 3 compatibility. Only Thunderbolt 3 devices work for this test.

Preparing for the test
Count the available Thunderbolt3 ports and have an available Thunderbolt3 device to use during the test.
Running the test

The Thunderbolt3 test is interactive. Run the following command, then select the Thunderbolt3 test name from the list that displays.

 rhcert-run

When prompted, enter the number of available Thunderbolt3 ports on the system. The system asks you to plug a Thunderbolt3 device into a port, then pauses until you press y to continue.

The system then asks you to unplug the device, and again pauses until you press y to continue. Repeat these steps for each port you entered. You can test ports in any order, but test each port only once.

Run time
The Thunderbolt3 test takes about 15 seconds per Thunderbolt3 port. This includes the time to manually plug in the device, scan the port, unplug the device, and scan the port again. Any other mandatory or selected tests add to the overall run time.